http_fetcher.h

//
// Copyright (C) 2009 The Android Open Source Project
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//

#ifndef UPDATE_ENGINE_HTTP_FETCHER_H_
#define UPDATE_ENGINE_HTTP_FETCHER_H_

#include <deque>
#include <string>
#include <vector>

#include <base/callback.h>
#include <base/logging.h>
#include <base/macros.h>
#include <brillo/message_loops/message_loop.h>

#include "update_engine/http_common.h"
#include "update_engine/proxy_resolver.h"
#include "update_engine/system_state.h"

// This class is a simple wrapper around an HTTP library (libcurl). We can
// easily mock out this interface for testing.

// Implementations of this class should use asynchronous i/o. They can access
// the MessageLoop to request callbacks when timers or file descriptors change.

namespace chromeos_update_engine {

class HttpFetcherDelegate;

class HttpFetcher {
 public:
  // |proxy_resolver| is the resolver that will be consulted for proxy
  // settings. It may be null, in which case direct connections will
  // be used. Does not take ownership of the resolver.
  HttpFetcher(ProxyResolver* proxy_resolver, SystemState* system_state)
      : post_data_set_(false),
        http_response_code_(0),
        delegate_(nullptr),
        proxies_(1, kNoProxy),
        proxy_resolver_(proxy_resolver),
        callback_(nullptr),
        system_state_(system_state) {}
  virtual ~HttpFetcher();

  void set_delegate(HttpFetcherDelegate* delegate) { delegate_ = delegate; }
  HttpFetcherDelegate* delegate() const { return delegate_; }
  int http_response_code() const { return http_response_code_; }

  // Optional: Post data to the server. The HttpFetcher should make a copy
  // of this data and upload it via HTTP POST during the transfer. The type of
  // the data is necessary for properly setting the Content-Type HTTP header.
  void SetPostData(const void* data, size_t size, HttpContentType type);

  // Same without a specified Content-Type.
  void SetPostData(const void* data, size_t size);

  // Proxy methods to set the proxies, then to pop them off.
  // Returns true on success.
  bool ResolveProxiesForUrl(const std::string& url,
                            const base::Closure& callback);

  void SetProxies(const std::deque<std::string>& proxies) {
    proxies_ = proxies;
  }
  const std::string& GetCurrentProxy() const {
    return proxies_.front();
  }
  bool HasProxy() const { return !proxies_.empty(); }
  void PopProxy() { proxies_.pop_front(); }

  // Downloading should resume from this offset
  virtual void SetOffset(off_t offset) = 0;

  // Set/unset the length of the range to be downloaded.
  virtual void SetLength(size_t length) = 0;
  virtual void UnsetLength() = 0;

  // Begins the transfer to the specified URL. This fetcher instance should not
  // be destroyed until either TransferComplete, or TransferTerminated is
  // called.
  virtual void BeginTransfer(const std::string& url) = 0;

  // Aborts the transfer. The transfer may not abort right away -- delegate's
  // TransferTerminated() will be called when the transfer is actually done.
  virtual void TerminateTransfer() = 0;

  // If data is coming in too quickly, you can call Pause() to pause the
  // transfer. The delegate will not have ReceivedBytes() called while
  // an HttpFetcher is paused.
  virtual void Pause() = 0;

  // Used to unpause an HttpFetcher and let the bytes stream in again.
  // If a delegate is set, ReceivedBytes() may be called on it before
  // Unpause() returns
  virtual void Unpause() = 0;

  // These two function are overloaded in LibcurlHttp fetcher to speed
  // testing.
  virtual void set_idle_seconds(int seconds) {}
  virtual void set_retry_seconds(int seconds) {}

  // Sets the values used to time out the connection if the transfer
  // rate is less than |low_speed_bps| bytes/sec for more than
  // |low_speed_sec| seconds.
  virtual void set_low_speed_limit(int low_speed_bps, int low_speed_sec) = 0;

  // Sets the connect timeout, e.g. the maximum amount of time willing
  // to wait for establishing a connection to the server.
  virtual void set_connect_timeout(int connect_timeout_seconds) = 0;

  // Sets the number of allowed retries.
  virtual void set_max_retry_count(int max_retry_count) = 0;

  // Get the total number of bytes downloaded by fetcher.
  virtual size_t GetBytesDownloaded() = 0;

  ProxyResolver* proxy_resolver() const { return proxy_resolver_; }

  // Returns the global SystemState.
  SystemState* GetSystemState() {
    return system_state_;
  }

 protected:
  // The URL we're actively fetching from
  std::string url_;

  // POST data for the transfer, and whether or not it was ever set
  bool post_data_set_;
  brillo::Blob post_data_;
  HttpContentType post_content_type_;

  // The server's HTTP response code from the last transfer. This
  // field should be set to 0 when a new transfer is initiated, and
  // set to the response code when the transfer is complete.
  int http_response_code_;

  // The delegate; may be null.
  HttpFetcherDelegate* delegate_;

  // Proxy servers
  std::deque<std::string> proxies_;

  ProxyResolver* const proxy_resolver_;

  // The ID of the idle callback, used when we have no proxy resolver.
  brillo::MessageLoop::TaskId no_resolver_idle_id_{
      brillo::MessageLoop::kTaskIdNull};

  // Callback for when we are resolving proxies
  std::unique_ptr<base::Closure> callback_;

  // Global system context.
  SystemState* system_state_;

 private:
  // Callback from the proxy resolver
  void ProxiesResolved(const std::deque<std::string>& proxies);
  static void StaticProxiesResolved(const std::deque<std::string>& proxies,
                                    void* data) {
    reinterpret_cast<HttpFetcher*>(data)->ProxiesResolved(proxies);
  }

  // Callback used to run the proxy resolver callback when there is no
  // |proxy_resolver_|.
  void NoProxyResolverCallback();

  DISALLOW_COPY_AND_ASSIGN(HttpFetcher);
};

// Interface for delegates
class HttpFetcherDelegate {
 public:
  virtual ~HttpFetcherDelegate() = default;

  // Called every time bytes are received.
  virtual void ReceivedBytes(HttpFetcher* fetcher,
                             const void* bytes,
                             size_t length) = 0;

  // Called if the fetcher seeks to a particular offset.
  virtual void SeekToOffset(off_t offset) {}

  // When a transfer has completed, exactly one of these two methods will be
  // called. TransferTerminated is called when the transfer has been aborted
  // through TerminateTransfer. TransferComplete is called in all other
  // situations. It's OK to destroy the |fetcher| object in this callback.
  virtual void TransferComplete(HttpFetcher* fetcher, bool successful) = 0;
  virtual void TransferTerminated(HttpFetcher* fetcher) {}
};

}  // namespace chromeos_update_engine

#endif  // UPDATE_ENGINE_HTTP_FETCHER_H_