| // |
| // Copyright (C) 2018 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| #include "update_engine/dynamic_partition_control_android.h" |
| |
| #include <chrono> // NOLINT(build/c++11) - using libsnapshot / liblp API |
| #include <cstdint> |
| #include <map> |
| #include <memory> |
| #include <set> |
| #include <string> |
| #include <string_view> |
| #include <utility> |
| #include <vector> |
| |
| #include <android-base/properties.h> |
| #include <android-base/strings.h> |
| #include <base/files/file_util.h> |
| #include <base/logging.h> |
| #include <base/strings/string_util.h> |
| #include <bootloader_message/bootloader_message.h> |
| #include <fs_mgr.h> |
| #include <fs_mgr_dm_linear.h> |
| #include <fs_mgr_overlayfs.h> |
| #include <libavb/libavb.h> |
| #include <libdm/dm.h> |
| #include <liblp/liblp.h> |
| #include <libsnapshot/cow_writer.h> |
| #include <libsnapshot/snapshot.h> |
| #include <libsnapshot/snapshot_stub.h> |
| |
| #include "update_engine/cleanup_previous_update_action.h" |
| #include "update_engine/common/boot_control_interface.h" |
| #include "update_engine/common/utils.h" |
| #include "update_engine/dynamic_partition_utils.h" |
| #include "update_engine/payload_consumer/delta_performer.h" |
| |
| using android::base::GetBoolProperty; |
| using android::base::GetProperty; |
| using android::base::Join; |
| using android::dm::DeviceMapper; |
| using android::dm::DmDeviceState; |
| using android::fs_mgr::CreateLogicalPartition; |
| using android::fs_mgr::CreateLogicalPartitionParams; |
| using android::fs_mgr::DestroyLogicalPartition; |
| using android::fs_mgr::Fstab; |
| using android::fs_mgr::MetadataBuilder; |
| using android::fs_mgr::Partition; |
| using android::fs_mgr::PartitionOpener; |
| using android::fs_mgr::SlotSuffixForSlotNumber; |
| using android::snapshot::OptimizeSourceCopyOperation; |
| using android::snapshot::Return; |
| using android::snapshot::SnapshotManager; |
| using android::snapshot::SnapshotManagerStub; |
| using android::snapshot::UpdateState; |
| |
| namespace chromeos_update_engine { |
| |
| constexpr char kUseDynamicPartitions[] = "ro.boot.dynamic_partitions"; |
| constexpr char kRetrfoitDynamicPartitions[] = |
| "ro.boot.dynamic_partitions_retrofit"; |
| constexpr char kVirtualAbEnabled[] = "ro.virtual_ab.enabled"; |
| constexpr char kVirtualAbRetrofit[] = "ro.virtual_ab.retrofit"; |
| constexpr char kVirtualAbCompressionEnabled[] = |
| "ro.virtual_ab.compression.enabled"; |
| |
| // Currently, android doesn't have a retrofit prop for VAB Compression. However, |
| // struct FeatureFlag forces us to determine if a feature is 'retrofit'. So this |
| // is here just to simplify code. Replace it with real retrofit prop name once |
| // there is one. |
| constexpr char kVirtualAbCompressionRetrofit[] = ""; |
| constexpr char kPostinstallFstabPrefix[] = "ro.postinstall.fstab.prefix"; |
| // Map timeout for dynamic partitions. |
| constexpr std::chrono::milliseconds kMapTimeout{1000}; |
| // Map timeout for dynamic partitions with snapshots. Since several devices |
| // needs to be mapped, this timeout is longer than |kMapTimeout|. |
| constexpr std::chrono::milliseconds kMapSnapshotTimeout{5000}; |
| |
| DynamicPartitionControlAndroid::~DynamicPartitionControlAndroid() { |
| Cleanup(); |
| } |
| |
| static FeatureFlag GetFeatureFlag(const char* enable_prop, |
| const char* retrofit_prop) { |
| // Default retrofit to false if retrofit_prop is empty. |
| bool retrofit = retrofit_prop && retrofit_prop[0] != '\0' && |
| GetBoolProperty(retrofit_prop, false); |
| bool enabled = GetBoolProperty(enable_prop, false); |
| if (retrofit && !enabled) { |
| LOG(ERROR) << retrofit_prop << " is true but " << enable_prop |
| << " is not. These sysprops are inconsistent. Assume that " |
| << enable_prop << " is true from now on."; |
| } |
| if (retrofit) { |
| return FeatureFlag(FeatureFlag::Value::RETROFIT); |
| } |
| if (enabled) { |
| return FeatureFlag(FeatureFlag::Value::LAUNCH); |
| } |
| return FeatureFlag(FeatureFlag::Value::NONE); |
| } |
| |
| DynamicPartitionControlAndroid::DynamicPartitionControlAndroid() |
| : dynamic_partitions_( |
| GetFeatureFlag(kUseDynamicPartitions, kRetrfoitDynamicPartitions)), |
| virtual_ab_(GetFeatureFlag(kVirtualAbEnabled, kVirtualAbRetrofit)), |
| virtual_ab_compression_(GetFeatureFlag(kVirtualAbCompressionEnabled, |
| kVirtualAbCompressionRetrofit)) { |
| if (GetVirtualAbFeatureFlag().IsEnabled()) { |
| snapshot_ = SnapshotManager::New(); |
| } else { |
| snapshot_ = SnapshotManagerStub::New(); |
| } |
| CHECK(snapshot_ != nullptr) << "Cannot initialize SnapshotManager."; |
| } |
| |
| FeatureFlag DynamicPartitionControlAndroid::GetDynamicPartitionsFeatureFlag() { |
| return dynamic_partitions_; |
| } |
| |
| FeatureFlag DynamicPartitionControlAndroid::GetVirtualAbFeatureFlag() { |
| return virtual_ab_; |
| } |
| |
| FeatureFlag |
| DynamicPartitionControlAndroid::GetVirtualAbCompressionFeatureFlag() { |
| return virtual_ab_compression_; |
| } |
| |
| bool DynamicPartitionControlAndroid::OptimizeOperation( |
| const std::string& partition_name, |
| const InstallOperation& operation, |
| InstallOperation* optimized) { |
| switch (operation.type()) { |
| case InstallOperation::SOURCE_COPY: |
| return target_supports_snapshot_ && |
| GetVirtualAbFeatureFlag().IsEnabled() && |
| mapped_devices_.count(partition_name + |
| SlotSuffixForSlotNumber(target_slot_)) > 0 && |
| OptimizeSourceCopyOperation(operation, optimized); |
| break; |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| bool DynamicPartitionControlAndroid::MapPartitionInternal( |
| const std::string& super_device, |
| const std::string& target_partition_name, |
| uint32_t slot, |
| bool force_writable, |
| std::string* path) { |
| CreateLogicalPartitionParams params = { |
| .block_device = super_device, |
| .metadata_slot = slot, |
| .partition_name = target_partition_name, |
| .force_writable = force_writable, |
| }; |
| bool success = false; |
| if (GetVirtualAbFeatureFlag().IsEnabled() && target_supports_snapshot_ && |
| force_writable && ExpectMetadataMounted()) { |
| // Only target partitions are mapped with force_writable. On Virtual |
| // A/B devices, target partitions may overlap with source partitions, so |
| // they must be mapped with snapshot. |
| // One exception is when /metadata is not mounted. Fallback to |
| // CreateLogicalPartition as snapshots are not created in the first place. |
| params.timeout_ms = kMapSnapshotTimeout; |
| success = snapshot_->MapUpdateSnapshot(params, path); |
| } else { |
| params.timeout_ms = kMapTimeout; |
| success = CreateLogicalPartition(params, path); |
| } |
| |
| if (!success) { |
| LOG(ERROR) << "Cannot map " << target_partition_name << " in " |
| << super_device << " on device mapper."; |
| return false; |
| } |
| LOG(INFO) << "Succesfully mapped " << target_partition_name |
| << " to device mapper (force_writable = " << force_writable |
| << "); device path at " << *path; |
| mapped_devices_.insert(target_partition_name); |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::MapPartitionOnDeviceMapper( |
| const std::string& super_device, |
| const std::string& target_partition_name, |
| uint32_t slot, |
| bool force_writable, |
| std::string* path) { |
| DmDeviceState state = GetState(target_partition_name); |
| if (state == DmDeviceState::ACTIVE) { |
| if (mapped_devices_.find(target_partition_name) != mapped_devices_.end()) { |
| if (GetDmDevicePathByName(target_partition_name, path)) { |
| LOG(INFO) << target_partition_name |
| << " is mapped on device mapper: " << *path; |
| return true; |
| } |
| LOG(ERROR) << target_partition_name << " is mapped but path is unknown."; |
| return false; |
| } |
| // If target_partition_name is not in mapped_devices_ but state is ACTIVE, |
| // the device might be mapped incorrectly before. Attempt to unmap it. |
| // Note that for source partitions, if GetState() == ACTIVE, callers (e.g. |
| // BootControlAndroid) should not call MapPartitionOnDeviceMapper, but |
| // should directly call GetDmDevicePathByName. |
| if (!UnmapPartitionOnDeviceMapper(target_partition_name)) { |
| LOG(ERROR) << target_partition_name |
| << " is mapped before the update, and it cannot be unmapped."; |
| return false; |
| } |
| state = GetState(target_partition_name); |
| if (state != DmDeviceState::INVALID) { |
| LOG(ERROR) << target_partition_name << " is unmapped but state is " |
| << static_cast<std::underlying_type_t<DmDeviceState>>(state); |
| return false; |
| } |
| } |
| if (state == DmDeviceState::INVALID) { |
| return MapPartitionInternal( |
| super_device, target_partition_name, slot, force_writable, path); |
| } |
| |
| LOG(ERROR) << target_partition_name |
| << " is mapped on device mapper but state is unknown: " |
| << static_cast<std::underlying_type_t<DmDeviceState>>(state); |
| return false; |
| } |
| |
| bool DynamicPartitionControlAndroid::UnmapPartitionOnDeviceMapper( |
| const std::string& target_partition_name) { |
| if (DeviceMapper::Instance().GetState(target_partition_name) != |
| DmDeviceState::INVALID) { |
| // Partitions at target slot on non-Virtual A/B devices are mapped as |
| // dm-linear. Also, on Virtual A/B devices, system_other may be mapped for |
| // preopt apps as dm-linear. |
| // Call DestroyLogicalPartition to handle these cases. |
| bool success = DestroyLogicalPartition(target_partition_name); |
| |
| // On a Virtual A/B device, |target_partition_name| may be a leftover from |
| // a paused update. Clean up any underlying devices. |
| if (ExpectMetadataMounted()) { |
| success &= snapshot_->UnmapUpdateSnapshot(target_partition_name); |
| } else { |
| LOG(INFO) << "Skip UnmapUpdateSnapshot(" << target_partition_name |
| << ") because metadata is not mounted"; |
| } |
| |
| if (!success) { |
| LOG(ERROR) << "Cannot unmap " << target_partition_name |
| << " from device mapper."; |
| return false; |
| } |
| LOG(INFO) << "Successfully unmapped " << target_partition_name |
| << " from device mapper."; |
| } |
| mapped_devices_.erase(target_partition_name); |
| return true; |
| } |
| |
| void DynamicPartitionControlAndroid::UnmapAllPartitions() { |
| if (mapped_devices_.empty()) { |
| return; |
| } |
| // UnmapPartitionOnDeviceMapper removes objects from mapped_devices_, hence |
| // a copy is needed for the loop. |
| std::set<std::string> mapped = mapped_devices_; |
| LOG(INFO) << "Destroying [" << Join(mapped, ", ") << "] from device mapper"; |
| for (const auto& partition_name : mapped) { |
| ignore_result(UnmapPartitionOnDeviceMapper(partition_name)); |
| } |
| } |
| |
| void DynamicPartitionControlAndroid::Cleanup() { |
| UnmapAllPartitions(); |
| metadata_device_.reset(); |
| } |
| |
| bool DynamicPartitionControlAndroid::DeviceExists(const std::string& path) { |
| return base::PathExists(base::FilePath(path)); |
| } |
| |
| android::dm::DmDeviceState DynamicPartitionControlAndroid::GetState( |
| const std::string& name) { |
| return DeviceMapper::Instance().GetState(name); |
| } |
| |
| bool DynamicPartitionControlAndroid::GetDmDevicePathByName( |
| const std::string& name, std::string* path) { |
| return DeviceMapper::Instance().GetDmDevicePathByName(name, path); |
| } |
| |
| std::unique_ptr<MetadataBuilder> |
| DynamicPartitionControlAndroid::LoadMetadataBuilder( |
| const std::string& super_device, uint32_t slot) { |
| auto builder = MetadataBuilder::New(PartitionOpener(), super_device, slot); |
| if (builder == nullptr) { |
| LOG(WARNING) << "No metadata slot " << BootControlInterface::SlotName(slot) |
| << " in " << super_device; |
| return nullptr; |
| } |
| LOG(INFO) << "Loaded metadata from slot " |
| << BootControlInterface::SlotName(slot) << " in " << super_device; |
| return builder; |
| } |
| |
| std::unique_ptr<MetadataBuilder> |
| DynamicPartitionControlAndroid::LoadMetadataBuilder( |
| const std::string& super_device, |
| uint32_t source_slot, |
| uint32_t target_slot) { |
| bool always_keep_source_slot = !target_supports_snapshot_; |
| auto builder = MetadataBuilder::NewForUpdate(PartitionOpener(), |
| super_device, |
| source_slot, |
| target_slot, |
| always_keep_source_slot); |
| if (builder == nullptr) { |
| LOG(WARNING) << "No metadata slot " |
| << BootControlInterface::SlotName(source_slot) << " in " |
| << super_device; |
| return nullptr; |
| } |
| LOG(INFO) << "Created metadata for new update from slot " |
| << BootControlInterface::SlotName(source_slot) << " in " |
| << super_device; |
| return builder; |
| } |
| |
| bool DynamicPartitionControlAndroid::StoreMetadata( |
| const std::string& super_device, |
| MetadataBuilder* builder, |
| uint32_t target_slot) { |
| auto metadata = builder->Export(); |
| if (metadata == nullptr) { |
| LOG(ERROR) << "Cannot export metadata to slot " |
| << BootControlInterface::SlotName(target_slot) << " in " |
| << super_device; |
| return false; |
| } |
| |
| if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) { |
| if (!FlashPartitionTable(super_device, *metadata)) { |
| LOG(ERROR) << "Cannot write metadata to " << super_device; |
| return false; |
| } |
| LOG(INFO) << "Written metadata to " << super_device; |
| } else { |
| if (!UpdatePartitionTable(super_device, *metadata, target_slot)) { |
| LOG(ERROR) << "Cannot write metadata to slot " |
| << BootControlInterface::SlotName(target_slot) << " in " |
| << super_device; |
| return false; |
| } |
| LOG(INFO) << "Copied metadata to slot " |
| << BootControlInterface::SlotName(target_slot) << " in " |
| << super_device; |
| } |
| |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::GetDeviceDir(std::string* out) { |
| // We can't use fs_mgr to look up |partition_name| because fstab |
| // doesn't list every slot partition (it uses the slotselect option |
| // to mask the suffix). |
| // |
| // We can however assume that there's an entry for the /misc mount |
| // point and use that to get the device file for the misc |
| // partition. This helps us locate the disk that |partition_name| |
| // resides on. From there we'll assume that a by-name scheme is used |
| // so we can just replace the trailing "misc" by the given |
| // |partition_name| and suffix corresponding to |slot|, e.g. |
| // |
| // /dev/block/platform/soc.0/7824900.sdhci/by-name/misc -> |
| // /dev/block/platform/soc.0/7824900.sdhci/by-name/boot_a |
| // |
| // If needed, it's possible to relax the by-name assumption in the |
| // future by trawling /sys/block looking for the appropriate sibling |
| // of misc and then finding an entry in /dev matching the sysfs |
| // entry. |
| |
| std::string err, misc_device = get_bootloader_message_blk_device(&err); |
| if (misc_device.empty()) { |
| LOG(ERROR) << "Unable to get misc block device: " << err; |
| return false; |
| } |
| |
| if (!utils::IsSymlink(misc_device.c_str())) { |
| LOG(ERROR) << "Device file " << misc_device << " for /misc " |
| << "is not a symlink."; |
| return false; |
| } |
| *out = base::FilePath(misc_device).DirName().value(); |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::PreparePartitionsForUpdate( |
| uint32_t source_slot, |
| uint32_t target_slot, |
| const DeltaArchiveManifest& manifest, |
| bool update, |
| uint64_t* required_size) { |
| source_slot_ = source_slot; |
| target_slot_ = target_slot; |
| if (required_size != nullptr) { |
| *required_size = 0; |
| } |
| |
| if (fs_mgr_overlayfs_is_setup()) { |
| // Non DAP devices can use overlayfs as well. |
| LOG(WARNING) |
| << "overlayfs overrides are active and can interfere with our " |
| "resources.\n" |
| << "run adb enable-verity to deactivate if required and try again."; |
| } |
| |
| // If metadata is erased but not formatted, it is possible to not mount |
| // it in recovery. It is acceptable to skip mounting and choose fallback path |
| // (PrepareDynamicPartitionsForUpdate) when sideloading full OTAs. |
| TEST_AND_RETURN_FALSE(EnsureMetadataMounted() || IsRecovery()); |
| |
| if (update) { |
| TEST_AND_RETURN_FALSE(EraseSystemOtherAvbFooter(source_slot, target_slot)); |
| } |
| |
| if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { |
| return true; |
| } |
| |
| if (target_slot == source_slot) { |
| LOG(ERROR) << "Cannot call PreparePartitionsForUpdate on current slot."; |
| return false; |
| } |
| |
| if (!SetTargetBuildVars(manifest)) { |
| return false; |
| } |
| |
| // Although the current build supports dynamic partitions, the given payload |
| // doesn't use it for target partitions. This could happen when applying a |
| // retrofit update. Skip updating the partition metadata for the target slot. |
| if (!is_target_dynamic_) { |
| return true; |
| } |
| |
| if (!update) |
| return true; |
| |
| bool delete_source = false; |
| |
| if (GetVirtualAbFeatureFlag().IsEnabled()) { |
| // On Virtual A/B device, either CancelUpdate() or BeginUpdate() must be |
| // called before calling UnmapUpdateSnapshot. |
| // - If target_supports_snapshot_, PrepareSnapshotPartitionsForUpdate() |
| // calls BeginUpdate() which resets update state |
| // - If !target_supports_snapshot_ or PrepareSnapshotPartitionsForUpdate |
| // failed in recovery, explicitly CancelUpdate(). |
| if (target_supports_snapshot_) { |
| if (PrepareSnapshotPartitionsForUpdate( |
| source_slot, target_slot, manifest, required_size)) { |
| return true; |
| } |
| |
| // Virtual A/B device doing Virtual A/B update in Android mode must use |
| // snapshots. |
| if (!IsRecovery()) { |
| LOG(ERROR) << "PrepareSnapshotPartitionsForUpdate failed in Android " |
| << "mode"; |
| return false; |
| } |
| |
| delete_source = true; |
| LOG(INFO) << "PrepareSnapshotPartitionsForUpdate failed in recovery. " |
| << "Attempt to overwrite existing partitions if possible"; |
| } else { |
| // Downgrading to an non-Virtual A/B build or is secondary OTA. |
| LOG(INFO) << "Using regular A/B on Virtual A/B because package disabled " |
| << "snapshots."; |
| } |
| |
| // In recovery, if /metadata is not mounted, it is likely that metadata |
| // partition is erased and not formatted yet. After sideloading, when |
| // rebooting into the new version, init will erase metadata partition, |
| // hence the failure of CancelUpdate() can be ignored here. |
| // However, if metadata is mounted and CancelUpdate fails, sideloading |
| // should not proceed because during next boot, snapshots will overlay on |
| // the devices incorrectly. |
| if (ExpectMetadataMounted()) { |
| TEST_AND_RETURN_FALSE(snapshot_->CancelUpdate()); |
| } else { |
| LOG(INFO) << "Skip canceling previous update because metadata is not " |
| << "mounted"; |
| } |
| } |
| |
| // TODO(xunchang) support partial update on non VAB enabled devices. |
| TEST_AND_RETURN_FALSE(PrepareDynamicPartitionsForUpdate( |
| source_slot, target_slot, manifest, delete_source)); |
| |
| if (required_size != nullptr) { |
| *required_size = 0; |
| } |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::SetTargetBuildVars( |
| const DeltaArchiveManifest& manifest) { |
| // Precondition: current build supports dynamic partition. |
| CHECK(GetDynamicPartitionsFeatureFlag().IsEnabled()); |
| |
| bool is_target_dynamic = |
| !manifest.dynamic_partition_metadata().groups().empty(); |
| bool target_supports_snapshot = |
| manifest.dynamic_partition_metadata().snapshot_enabled(); |
| |
| if (manifest.partial_update()) { |
| // Partial updates requires DAP. On partial updates that does not involve |
| // dynamic partitions, groups() can be empty, so also assume |
| // is_target_dynamic in this case. This assumption should be safe because we |
| // also check target_supports_snapshot below, which presumably also implies |
| // target build supports dynamic partition. |
| if (!is_target_dynamic) { |
| LOG(INFO) << "Assuming target build supports dynamic partitions for " |
| "partial updates."; |
| is_target_dynamic = true; |
| } |
| |
| // Partial updates requires Virtual A/B. Double check that both current |
| // build and target build supports Virtual A/B. |
| if (!GetVirtualAbFeatureFlag().IsEnabled()) { |
| LOG(ERROR) << "Partial update cannot be applied on a device that does " |
| "not support snapshots."; |
| return false; |
| } |
| if (!target_supports_snapshot) { |
| LOG(ERROR) << "Cannot apply partial update to a build that does not " |
| "support snapshots."; |
| return false; |
| } |
| } |
| |
| // Store the flags. |
| is_target_dynamic_ = is_target_dynamic; |
| // If !is_target_dynamic_, leave target_supports_snapshot_ unset because |
| // snapshots would not work without dynamic partition. |
| if (is_target_dynamic_) { |
| target_supports_snapshot_ = target_supports_snapshot; |
| } |
| return true; |
| } |
| |
| namespace { |
| // Try our best to erase AVB footer. |
| class AvbFooterEraser { |
| public: |
| explicit AvbFooterEraser(const std::string& path) : path_(path) {} |
| bool Erase() { |
| // Try to mark the block device read-only. Ignore any |
| // failure since this won't work when passing regular files. |
| ignore_result(utils::SetBlockDeviceReadOnly(path_, false /* readonly */)); |
| |
| fd_.reset(new EintrSafeFileDescriptor()); |
| int flags = O_WRONLY | O_TRUNC | O_CLOEXEC | O_SYNC; |
| TEST_AND_RETURN_FALSE(fd_->Open(path_.c_str(), flags)); |
| |
| // Need to write end-AVB_FOOTER_SIZE to end. |
| static_assert(AVB_FOOTER_SIZE > 0); |
| off64_t offset = fd_->Seek(-AVB_FOOTER_SIZE, SEEK_END); |
| TEST_AND_RETURN_FALSE_ERRNO(offset >= 0); |
| uint64_t write_size = AVB_FOOTER_SIZE; |
| LOG(INFO) << "Zeroing " << path_ << " @ [" << offset << ", " |
| << (offset + write_size) << "] (" << write_size << " bytes)"; |
| brillo::Blob zeros(write_size); |
| TEST_AND_RETURN_FALSE(utils::WriteAll(fd_, zeros.data(), zeros.size())); |
| return true; |
| } |
| ~AvbFooterEraser() { |
| TEST_AND_RETURN(fd_ != nullptr && fd_->IsOpen()); |
| if (!fd_->Close()) { |
| LOG(WARNING) << "Failed to close fd for " << path_; |
| } |
| } |
| |
| private: |
| std::string path_; |
| FileDescriptorPtr fd_; |
| }; |
| |
| } // namespace |
| |
| std::optional<bool> |
| DynamicPartitionControlAndroid::IsAvbEnabledOnSystemOther() { |
| auto prefix = GetProperty(kPostinstallFstabPrefix, ""); |
| if (prefix.empty()) { |
| LOG(WARNING) << "Cannot get " << kPostinstallFstabPrefix; |
| return std::nullopt; |
| } |
| auto path = base::FilePath(prefix).Append("etc/fstab.postinstall").value(); |
| return IsAvbEnabledInFstab(path); |
| } |
| |
| std::optional<bool> DynamicPartitionControlAndroid::IsAvbEnabledInFstab( |
| const std::string& path) { |
| Fstab fstab; |
| if (!ReadFstabFromFile(path, &fstab)) { |
| PLOG(WARNING) << "Cannot read fstab from " << path; |
| if (errno == ENOENT) { |
| return false; |
| } |
| return std::nullopt; |
| } |
| for (const auto& entry : fstab) { |
| if (!entry.avb_keys.empty()) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool DynamicPartitionControlAndroid::GetSystemOtherPath( |
| uint32_t source_slot, |
| uint32_t target_slot, |
| const std::string& partition_name_suffix, |
| std::string* path, |
| bool* should_unmap) { |
| path->clear(); |
| *should_unmap = false; |
| |
| // Check that AVB is enabled on system_other before erasing. |
| auto has_avb = IsAvbEnabledOnSystemOther(); |
| TEST_AND_RETURN_FALSE(has_avb.has_value()); |
| if (!has_avb.value()) { |
| LOG(INFO) << "AVB is not enabled on system_other. Skip erasing."; |
| return true; |
| } |
| |
| if (!IsRecovery()) { |
| // Found unexpected avb_keys for system_other on devices retrofitting |
| // dynamic partitions. Previous crash in update_engine may leave logical |
| // partitions mapped on physical system_other partition. It is difficult to |
| // handle these cases. Just fail. |
| if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) { |
| LOG(ERROR) << "Cannot erase AVB footer on system_other on devices with " |
| << "retrofit dynamic partitions. They should not have AVB " |
| << "enabled on system_other."; |
| return false; |
| } |
| } |
| |
| std::string device_dir_str; |
| TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); |
| base::FilePath device_dir(device_dir_str); |
| |
| // On devices without dynamic partition, search for static partitions. |
| if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { |
| *path = device_dir.Append(partition_name_suffix).value(); |
| TEST_AND_RETURN_FALSE(DeviceExists(*path)); |
| return true; |
| } |
| |
| auto source_super_device = |
| device_dir.Append(GetSuperPartitionName(source_slot)).value(); |
| |
| auto builder = LoadMetadataBuilder(source_super_device, source_slot); |
| if (builder == nullptr) { |
| if (IsRecovery()) { |
| // It might be corrupted for some reason. It should still be able to |
| // sideload. |
| LOG(WARNING) << "Super partition metadata cannot be read from the source " |
| << "slot, skip erasing."; |
| return true; |
| } else { |
| // Device has booted into Android mode, indicating that the super |
| // partition metadata should be there. |
| LOG(ERROR) << "Super partition metadata cannot be read from the source " |
| << "slot. This is unexpected on devices with dynamic " |
| << "partitions enabled."; |
| return false; |
| } |
| } |
| auto p = builder->FindPartition(partition_name_suffix); |
| if (p == nullptr) { |
| // If the source slot is flashed without system_other, it does not exist |
| // in super partition metadata at source slot. It is safe to skip it. |
| LOG(INFO) << "Can't find " << partition_name_suffix |
| << " in metadata source slot, skip erasing."; |
| return true; |
| } |
| // System_other created by flashing tools should be erased. |
| // If partition is created by update_engine (via NewForUpdate), it is a |
| // left-over partition from the previous update and does not contain |
| // system_other, hence there is no need to erase. |
| // Note the reverse is not necessary true. If the flag is not set, we don't |
| // know if the partition is created by update_engine or by flashing tools |
| // because older versions of super partition metadata does not contain this |
| // flag. It is okay to erase the AVB footer anyways. |
| if (p->attributes() & LP_PARTITION_ATTR_UPDATED) { |
| LOG(INFO) << partition_name_suffix |
| << " does not contain system_other, skip erasing."; |
| return true; |
| } |
| |
| if (p->size() < AVB_FOOTER_SIZE) { |
| LOG(INFO) << partition_name_suffix << " has length " << p->size() |
| << "( < AVB_FOOTER_SIZE " << AVB_FOOTER_SIZE |
| << "), skip erasing."; |
| return true; |
| } |
| |
| // Delete any pre-existing device with name |partition_name_suffix| and |
| // also remove it from |mapped_devices_|. |
| // In recovery, metadata might not be mounted, and |
| // UnmapPartitionOnDeviceMapper might fail. However, |
| // it is unusual that system_other has already been mapped. Hence, just skip. |
| TEST_AND_RETURN_FALSE(UnmapPartitionOnDeviceMapper(partition_name_suffix)); |
| // Use CreateLogicalPartition directly to avoid mapping with existing |
| // snapshots. |
| CreateLogicalPartitionParams params = { |
| .block_device = source_super_device, |
| .metadata_slot = source_slot, |
| .partition_name = partition_name_suffix, |
| .force_writable = true, |
| .timeout_ms = kMapTimeout, |
| }; |
| TEST_AND_RETURN_FALSE(CreateLogicalPartition(params, path)); |
| *should_unmap = true; |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::EraseSystemOtherAvbFooter( |
| uint32_t source_slot, uint32_t target_slot) { |
| LOG(INFO) << "Erasing AVB footer of system_other partition before update."; |
| |
| const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); |
| const std::string partition_name_suffix = "system" + target_suffix; |
| |
| std::string path; |
| bool should_unmap = false; |
| |
| TEST_AND_RETURN_FALSE(GetSystemOtherPath( |
| source_slot, target_slot, partition_name_suffix, &path, &should_unmap)); |
| |
| if (path.empty()) { |
| return true; |
| } |
| |
| bool ret = AvbFooterEraser(path).Erase(); |
| |
| // Delete |partition_name_suffix| from device mapper and from |
| // |mapped_devices_| again so that it does not interfere with update process. |
| // In recovery, metadata might not be mounted, and |
| // UnmapPartitionOnDeviceMapper might fail. However, DestroyLogicalPartition |
| // should be called. If DestroyLogicalPartition does fail, it is still okay |
| // to skip the error here and let Prepare*() fail later. |
| if (should_unmap) { |
| TEST_AND_RETURN_FALSE(UnmapPartitionOnDeviceMapper(partition_name_suffix)); |
| } |
| |
| return ret; |
| } |
| |
| bool DynamicPartitionControlAndroid::PrepareDynamicPartitionsForUpdate( |
| uint32_t source_slot, |
| uint32_t target_slot, |
| const DeltaArchiveManifest& manifest, |
| bool delete_source) { |
| const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); |
| |
| // Unmap all the target dynamic partitions because they would become |
| // inconsistent with the new metadata. |
| for (const auto& group : manifest.dynamic_partition_metadata().groups()) { |
| for (const auto& partition_name : group.partition_names()) { |
| if (!UnmapPartitionOnDeviceMapper(partition_name + target_suffix)) { |
| return false; |
| } |
| } |
| } |
| |
| std::string device_dir_str; |
| if (!GetDeviceDir(&device_dir_str)) { |
| return false; |
| } |
| base::FilePath device_dir(device_dir_str); |
| auto source_device = |
| device_dir.Append(GetSuperPartitionName(source_slot)).value(); |
| |
| auto builder = LoadMetadataBuilder(source_device, source_slot, target_slot); |
| if (builder == nullptr) { |
| LOG(ERROR) << "No metadata at " |
| << BootControlInterface::SlotName(source_slot); |
| return false; |
| } |
| |
| if (delete_source) { |
| TEST_AND_RETURN_FALSE( |
| DeleteSourcePartitions(builder.get(), source_slot, manifest)); |
| } |
| |
| if (!UpdatePartitionMetadata(builder.get(), target_slot, manifest)) { |
| return false; |
| } |
| |
| auto target_device = |
| device_dir.Append(GetSuperPartitionName(target_slot)).value(); |
| return StoreMetadata(target_device, builder.get(), target_slot); |
| } |
| |
| bool DynamicPartitionControlAndroid::PrepareSnapshotPartitionsForUpdate( |
| uint32_t source_slot, |
| uint32_t target_slot, |
| const DeltaArchiveManifest& manifest, |
| uint64_t* required_size) { |
| TEST_AND_RETURN_FALSE(ExpectMetadataMounted()); |
| if (!snapshot_->BeginUpdate()) { |
| LOG(ERROR) << "Cannot begin new update."; |
| return false; |
| } |
| auto ret = snapshot_->CreateUpdateSnapshots(manifest); |
| if (!ret) { |
| LOG(ERROR) << "Cannot create update snapshots: " << ret.string(); |
| if (required_size != nullptr && |
| ret.error_code() == Return::ErrorCode::NO_SPACE) { |
| *required_size = ret.required_size(); |
| } |
| return false; |
| } |
| return true; |
| } |
| |
| std::string DynamicPartitionControlAndroid::GetSuperPartitionName( |
| uint32_t slot) { |
| return fs_mgr_get_super_partition_name(slot); |
| } |
| |
| bool DynamicPartitionControlAndroid::UpdatePartitionMetadata( |
| MetadataBuilder* builder, |
| uint32_t target_slot, |
| const DeltaArchiveManifest& manifest) { |
| // Check preconditions. |
| CHECK(!GetVirtualAbFeatureFlag().IsEnabled() || IsRecovery()) |
| << "UpdatePartitionMetadata is called on a Virtual A/B device " |
| "but source partitions is not deleted. This is not allowed."; |
| |
| // If applying downgrade from Virtual A/B to non-Virtual A/B, the left-over |
| // COW group needs to be deleted to ensure there are enough space to create |
| // target partitions. |
| builder->RemoveGroupAndPartitions(android::snapshot::kCowGroupName); |
| |
| const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); |
| DeleteGroupsWithSuffix(builder, target_suffix); |
| |
| uint64_t total_size = 0; |
| for (const auto& group : manifest.dynamic_partition_metadata().groups()) { |
| total_size += group.size(); |
| } |
| |
| std::string expr; |
| uint64_t allocatable_space = builder->AllocatableSpace(); |
| // On device retrofitting dynamic partitions, allocatable_space = super. |
| // On device launching dynamic partitions w/o VAB, |
| // allocatable_space = super / 2. |
| // On device launching dynamic partitions with VAB, allocatable_space = super. |
| if (!GetDynamicPartitionsFeatureFlag().IsRetrofit() && |
| !GetVirtualAbFeatureFlag().IsEnabled()) { |
| allocatable_space /= 2; |
| expr = "half of "; |
| } |
| if (total_size > allocatable_space) { |
| LOG(ERROR) << "The maximum size of all groups with suffix " << target_suffix |
| << " (" << total_size << ") has exceeded " << expr |
| << "allocatable space for dynamic partitions " |
| << allocatable_space << "."; |
| return false; |
| } |
| |
| // name of partition(e.g. "system") -> size in bytes |
| std::map<std::string, uint64_t> partition_sizes; |
| for (const auto& partition : manifest.partitions()) { |
| partition_sizes.emplace(partition.partition_name(), |
| partition.new_partition_info().size()); |
| } |
| |
| for (const auto& group : manifest.dynamic_partition_metadata().groups()) { |
| auto group_name_suffix = group.name() + target_suffix; |
| if (!builder->AddGroup(group_name_suffix, group.size())) { |
| LOG(ERROR) << "Cannot add group " << group_name_suffix << " with size " |
| << group.size(); |
| return false; |
| } |
| LOG(INFO) << "Added group " << group_name_suffix << " with size " |
| << group.size(); |
| |
| for (const auto& partition_name : group.partition_names()) { |
| auto partition_sizes_it = partition_sizes.find(partition_name); |
| if (partition_sizes_it == partition_sizes.end()) { |
| // TODO(tbao): Support auto-filling partition info for framework-only |
| // OTA. |
| LOG(ERROR) << "dynamic_partition_metadata contains partition " |
| << partition_name << " but it is not part of the manifest. " |
| << "This is not supported."; |
| return false; |
| } |
| uint64_t partition_size = partition_sizes_it->second; |
| |
| auto partition_name_suffix = partition_name + target_suffix; |
| Partition* p = builder->AddPartition( |
| partition_name_suffix, group_name_suffix, LP_PARTITION_ATTR_READONLY); |
| if (!p) { |
| LOG(ERROR) << "Cannot add partition " << partition_name_suffix |
| << " to group " << group_name_suffix; |
| return false; |
| } |
| if (!builder->ResizePartition(p, partition_size)) { |
| LOG(ERROR) << "Cannot resize partition " << partition_name_suffix |
| << " to size " << partition_size << ". Not enough space?"; |
| return false; |
| } |
| LOG(INFO) << "Added partition " << partition_name_suffix << " to group " |
| << group_name_suffix << " with size " << partition_size; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::FinishUpdate(bool powerwash_required) { |
| if (ExpectMetadataMounted()) { |
| if (snapshot_->GetUpdateState() == UpdateState::Initiated) { |
| LOG(INFO) << "Snapshot writes are done."; |
| return snapshot_->FinishedSnapshotWrites(powerwash_required); |
| } |
| } else { |
| LOG(INFO) << "Skip FinishedSnapshotWrites() because /metadata is not " |
| << "mounted"; |
| } |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::GetPartitionDevice( |
| const std::string& partition_name, |
| uint32_t slot, |
| uint32_t current_slot, |
| bool not_in_payload, |
| std::string* device, |
| bool* is_dynamic) { |
| const auto& partition_name_suffix = |
| partition_name + SlotSuffixForSlotNumber(slot); |
| std::string device_dir_str; |
| TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); |
| base::FilePath device_dir(device_dir_str); |
| |
| if (is_dynamic) { |
| *is_dynamic = false; |
| } |
| |
| // When looking up target partition devices, treat them as static if the |
| // current payload doesn't encode them as dynamic partitions. This may happen |
| // when applying a retrofit update on top of a dynamic-partitions-enabled |
| // build. |
| if (GetDynamicPartitionsFeatureFlag().IsEnabled() && |
| (slot == current_slot || is_target_dynamic_)) { |
| switch (GetDynamicPartitionDevice(device_dir, |
| partition_name_suffix, |
| slot, |
| current_slot, |
| not_in_payload, |
| device)) { |
| case DynamicPartitionDeviceStatus::SUCCESS: |
| if (is_dynamic) { |
| *is_dynamic = true; |
| } |
| return true; |
| case DynamicPartitionDeviceStatus::TRY_STATIC: |
| break; |
| case DynamicPartitionDeviceStatus::ERROR: // fallthrough |
| default: |
| return false; |
| } |
| } |
| base::FilePath path = device_dir.Append(partition_name_suffix); |
| if (!DeviceExists(path.value())) { |
| LOG(ERROR) << "Device file " << path.value() << " does not exist."; |
| return false; |
| } |
| |
| *device = path.value(); |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::GetPartitionDevice( |
| const std::string& partition_name, |
| uint32_t slot, |
| uint32_t current_slot, |
| std::string* device) { |
| return GetPartitionDevice( |
| partition_name, slot, current_slot, false, device, nullptr); |
| } |
| |
| bool DynamicPartitionControlAndroid::IsSuperBlockDevice( |
| const base::FilePath& device_dir, |
| uint32_t current_slot, |
| const std::string& partition_name_suffix) { |
| std::string source_device = |
| device_dir.Append(GetSuperPartitionName(current_slot)).value(); |
| auto source_metadata = LoadMetadataBuilder(source_device, current_slot); |
| return source_metadata->HasBlockDevice(partition_name_suffix); |
| } |
| |
| DynamicPartitionControlAndroid::DynamicPartitionDeviceStatus |
| DynamicPartitionControlAndroid::GetDynamicPartitionDevice( |
| const base::FilePath& device_dir, |
| const std::string& partition_name_suffix, |
| uint32_t slot, |
| uint32_t current_slot, |
| bool not_in_payload, |
| std::string* device) { |
| std::string super_device = |
| device_dir.Append(GetSuperPartitionName(slot)).value(); |
| |
| auto builder = LoadMetadataBuilder(super_device, slot); |
| if (builder == nullptr) { |
| LOG(ERROR) << "No metadata in slot " |
| << BootControlInterface::SlotName(slot); |
| return DynamicPartitionDeviceStatus::ERROR; |
| } |
| if (builder->FindPartition(partition_name_suffix) == nullptr) { |
| LOG(INFO) << partition_name_suffix |
| << " is not in super partition metadata."; |
| |
| if (IsSuperBlockDevice(device_dir, current_slot, partition_name_suffix)) { |
| LOG(ERROR) << "The static partition " << partition_name_suffix |
| << " is a block device for current metadata." |
| << "It cannot be used as a logical partition."; |
| return DynamicPartitionDeviceStatus::ERROR; |
| } |
| |
| return DynamicPartitionDeviceStatus::TRY_STATIC; |
| } |
| |
| if (slot == current_slot) { |
| if (GetState(partition_name_suffix) != DmDeviceState::ACTIVE) { |
| LOG(WARNING) << partition_name_suffix << " is at current slot but it is " |
| << "not mapped. Now try to map it."; |
| } else { |
| if (GetDmDevicePathByName(partition_name_suffix, device)) { |
| LOG(INFO) << partition_name_suffix |
| << " is mapped on device mapper: " << *device; |
| return DynamicPartitionDeviceStatus::SUCCESS; |
| } |
| LOG(ERROR) << partition_name_suffix << "is mapped but path is unknown."; |
| return DynamicPartitionDeviceStatus::ERROR; |
| } |
| } |
| |
| bool force_writable = (slot != current_slot) && !not_in_payload; |
| if (MapPartitionOnDeviceMapper( |
| super_device, partition_name_suffix, slot, force_writable, device)) { |
| return DynamicPartitionDeviceStatus::SUCCESS; |
| } |
| return DynamicPartitionDeviceStatus::ERROR; |
| } |
| |
| void DynamicPartitionControlAndroid::set_fake_mapped_devices( |
| const std::set<std::string>& fake) { |
| mapped_devices_ = fake; |
| } |
| |
| bool DynamicPartitionControlAndroid::IsRecovery() { |
| return constants::kIsRecovery; |
| } |
| |
| static bool IsIncrementalUpdate(const DeltaArchiveManifest& manifest) { |
| const auto& partitions = manifest.partitions(); |
| return std::any_of(partitions.begin(), partitions.end(), [](const auto& p) { |
| return p.has_old_partition_info(); |
| }); |
| } |
| |
| bool DynamicPartitionControlAndroid::DeleteSourcePartitions( |
| MetadataBuilder* builder, |
| uint32_t source_slot, |
| const DeltaArchiveManifest& manifest) { |
| TEST_AND_RETURN_FALSE(IsRecovery()); |
| |
| if (IsIncrementalUpdate(manifest)) { |
| LOG(ERROR) << "Cannot sideload incremental OTA because snapshots cannot " |
| << "be created."; |
| if (GetVirtualAbFeatureFlag().IsLaunch()) { |
| LOG(ERROR) << "Sideloading incremental updates on devices launches " |
| << " Virtual A/B is not supported."; |
| } |
| return false; |
| } |
| |
| LOG(INFO) << "Will overwrite existing partitions. Slot " |
| << BootControlInterface::SlotName(source_slot) |
| << "may be unbootable until update finishes!"; |
| const std::string source_suffix = SlotSuffixForSlotNumber(source_slot); |
| DeleteGroupsWithSuffix(builder, source_suffix); |
| |
| return true; |
| } |
| |
| std::unique_ptr<AbstractAction> |
| DynamicPartitionControlAndroid::GetCleanupPreviousUpdateAction( |
| BootControlInterface* boot_control, |
| PrefsInterface* prefs, |
| CleanupPreviousUpdateActionDelegateInterface* delegate) { |
| if (!GetVirtualAbFeatureFlag().IsEnabled()) { |
| return std::make_unique<NoOpAction>(); |
| } |
| return std::make_unique<CleanupPreviousUpdateAction>( |
| prefs, boot_control, snapshot_.get(), delegate); |
| } |
| |
| bool DynamicPartitionControlAndroid::ResetUpdate(PrefsInterface* prefs) { |
| if (!GetVirtualAbFeatureFlag().IsEnabled()) { |
| return true; |
| } |
| |
| LOG(INFO) << __func__ << " resetting update state and deleting snapshots."; |
| TEST_AND_RETURN_FALSE(prefs != nullptr); |
| |
| // If the device has already booted into the target slot, |
| // ResetUpdateProgress may pass but CancelUpdate fails. |
| // This is expected. A scheduled CleanupPreviousUpdateAction should free |
| // space when it is done. |
| TEST_AND_RETURN_FALSE(DeltaPerformer::ResetUpdateProgress( |
| prefs, false /* quick */, false /* skip dynamic partitions metadata */)); |
| |
| if (ExpectMetadataMounted()) { |
| TEST_AND_RETURN_FALSE(snapshot_->CancelUpdate()); |
| } else { |
| LOG(INFO) << "Skip cancelling update in ResetUpdate because /metadata is " |
| << "not mounted"; |
| } |
| |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::ListDynamicPartitionsForSlot( |
| uint32_t current_slot, std::vector<std::string>* partitions) { |
| if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { |
| LOG(ERROR) << "Dynamic partition is not enabled"; |
| return false; |
| } |
| |
| std::string device_dir_str; |
| TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); |
| base::FilePath device_dir(device_dir_str); |
| auto super_device = |
| device_dir.Append(GetSuperPartitionName(current_slot)).value(); |
| auto builder = LoadMetadataBuilder(super_device, current_slot); |
| TEST_AND_RETURN_FALSE(builder != nullptr); |
| |
| std::vector<std::string> result; |
| auto suffix = SlotSuffixForSlotNumber(current_slot); |
| for (const auto& group : builder->ListGroups()) { |
| for (const auto& partition : builder->ListPartitionsInGroup(group)) { |
| std::string_view partition_name = partition->name(); |
| if (!android::base::ConsumeSuffix(&partition_name, suffix)) { |
| continue; |
| } |
| result.emplace_back(partition_name); |
| } |
| } |
| *partitions = std::move(result); |
| return true; |
| } |
| |
| bool DynamicPartitionControlAndroid::VerifyExtentsForUntouchedPartitions( |
| uint32_t source_slot, |
| uint32_t target_slot, |
| const std::vector<std::string>& partitions) { |
| std::string device_dir_str; |
| TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); |
| base::FilePath device_dir(device_dir_str); |
| |
| auto source_super_device = |
| device_dir.Append(GetSuperPartitionName(source_slot)).value(); |
| auto source_builder = LoadMetadataBuilder(source_super_device, source_slot); |
| TEST_AND_RETURN_FALSE(source_builder != nullptr); |
| |
| auto target_super_device = |
| device_dir.Append(GetSuperPartitionName(target_slot)).value(); |
| auto target_builder = LoadMetadataBuilder(target_super_device, target_slot); |
| TEST_AND_RETURN_FALSE(target_builder != nullptr); |
| |
| return MetadataBuilder::VerifyExtentsAgainstSourceMetadata( |
| *source_builder, source_slot, *target_builder, target_slot, partitions); |
| } |
| |
| bool DynamicPartitionControlAndroid::ExpectMetadataMounted() { |
| // No need to mount metadata for non-Virtual A/B devices. |
| if (!GetVirtualAbFeatureFlag().IsEnabled()) { |
| return false; |
| } |
| // Intentionally not checking |metadata_device_| in Android mode. |
| // /metadata should always be mounted in Android mode. If it isn't, let caller |
| // fails when calling into SnapshotManager. |
| if (!IsRecovery()) { |
| return true; |
| } |
| // In recovery mode, explicitly check |metadata_device_|. |
| return metadata_device_ != nullptr; |
| } |
| |
| bool DynamicPartitionControlAndroid::EnsureMetadataMounted() { |
| // No need to mount metadata for non-Virtual A/B devices. |
| if (!GetVirtualAbFeatureFlag().IsEnabled()) { |
| return true; |
| } |
| |
| if (metadata_device_ == nullptr) { |
| metadata_device_ = snapshot_->EnsureMetadataMounted(); |
| } |
| return metadata_device_ != nullptr; |
| } |
| |
| std::unique_ptr<android::snapshot::ISnapshotWriter> |
| DynamicPartitionControlAndroid::OpenCowWriter( |
| const std::string& partition_name, |
| const std::optional<std::string>& source_path, |
| bool is_append) { |
| auto suffix = SlotSuffixForSlotNumber(target_slot_); |
| |
| std::string device_dir_str; |
| if (!GetDeviceDir(&device_dir_str)) { |
| LOG(ERROR) << "Failed to get device dir!"; |
| return nullptr; |
| } |
| base::FilePath device_dir(device_dir_str); |
| auto super_device = |
| device_dir.Append(GetSuperPartitionName(target_slot_)).value(); |
| CreateLogicalPartitionParams params = { |
| .block_device = super_device, |
| .metadata_slot = target_slot_, |
| .partition_name = partition_name + suffix, |
| .force_writable = true, |
| }; |
| // TODO(zhangkelvin) Open an APPEND mode CowWriter once there's an API to do |
| // it. |
| return snapshot_->OpenSnapshotWriter(params, std::move(source_path)); |
| } |
| |
| } // namespace chromeos_update_engine |