| // |
| // Copyright (C) 2013 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| #include "update_engine/common/constants.h" |
| |
| namespace chromeos_update_engine { |
| |
| const char kExclusionPrefsSubDir[] = "exclusion"; |
| |
| const char kDlcPrefsSubDir[] = "dlc"; |
| |
| const char kPowerwashSafePrefsSubDirectory[] = "update_engine/prefs"; |
| |
| const char kPrefsSubDirectory[] = "prefs"; |
| |
| const char kStatefulPartition[] = "/mnt/stateful_partition"; |
| |
| const char kPostinstallDefaultScript[] = "postinst"; |
| |
| // Constants defining keys for the persisted state of update engine. |
| const char kPrefsAttemptInProgress[] = "attempt-in-progress"; |
| const char kPrefsBackoffExpiryTime[] = "backoff-expiry-time"; |
| const char kPrefsBootId[] = "boot-id"; |
| const char kPrefsCurrentBytesDownloaded[] = "current-bytes-downloaded"; |
| const char kPrefsCurrentResponseSignature[] = "current-response-signature"; |
| const char kPrefsCurrentUrlFailureCount[] = "current-url-failure-count"; |
| const char kPrefsCurrentUrlIndex[] = "current-url-index"; |
| const char kPrefsDailyMetricsLastReportedAt[] = |
| "daily-metrics-last-reported-at"; |
| const char kPrefsDeltaUpdateFailures[] = "delta-update-failures"; |
| const char kPrefsDynamicPartitionMetadataUpdated[] = |
| "dynamic-partition-metadata-updated"; |
| const char kPrefsFullPayloadAttemptNumber[] = "full-payload-attempt-number"; |
| const char kPrefsInstallDateDays[] = "install-date-days"; |
| const char kPrefsLastActivePingDay[] = "last-active-ping-day"; |
| const char kPrefsLastRollCallPingDay[] = "last-roll-call-ping-day"; |
| const char kPrefsManifestMetadataSize[] = "manifest-metadata-size"; |
| const char kPrefsManifestSignatureSize[] = "manifest-signature-size"; |
| const char kPrefsMetricsAttemptLastReportingTime[] = |
| "metrics-attempt-last-reporting-time"; |
| const char kPrefsMetricsCheckLastReportingTime[] = |
| "metrics-check-last-reporting-time"; |
| const char kPrefsNoIgnoreBackoff[] = "no-ignore-backoff"; |
| const char kPrefsNumReboots[] = "num-reboots"; |
| const char kPrefsNumResponsesSeen[] = "num-responses-seen"; |
| const char kPrefsOmahaCohort[] = "omaha-cohort"; |
| const char kPrefsOmahaCohortHint[] = "omaha-cohort-hint"; |
| const char kPrefsOmahaCohortName[] = "omaha-cohort-name"; |
| const char kPrefsOmahaEolDate[] = "omaha-eol-date"; |
| const char kPrefsP2PEnabled[] = "p2p-enabled"; |
| const char kPrefsP2PFirstAttemptTimestamp[] = "p2p-first-attempt-timestamp"; |
| const char kPrefsP2PNumAttempts[] = "p2p-num-attempts"; |
| const char kPrefsPayloadAttemptNumber[] = "payload-attempt-number"; |
| const char kPrefsTestUpdateCheckIntervalTimeout[] = |
| "test-update-check-interval-timeout"; |
| // Keep |kPrefsPingActive| in sync with |kDlcMetadataFilePingActive| in |
| // dlcservice. |
| const char kPrefsPingActive[] = "active"; |
| const char kPrefsPingLastActive[] = "date_last_active"; |
| const char kPrefsPingLastRollcall[] = "date_last_rollcall"; |
| const char kPrefsLastFp[] = "last-fp"; |
| const char kPrefsPostInstallSucceeded[] = "post-install-succeeded"; |
| const char kPrefsPreviousVersion[] = "previous-version"; |
| const char kPrefsResumedUpdateFailures[] = "resumed-update-failures"; |
| const char kPrefsRollbackHappened[] = "rollback-happened"; |
| const char kPrefsRollbackVersion[] = "rollback-version"; |
| const char kPrefsChannelOnSlotPrefix[] = "channel-on-slot-"; |
| const char kPrefsSystemUpdatedMarker[] = "system-updated-marker"; |
| const char kPrefsTargetVersionAttempt[] = "target-version-attempt"; |
| const char kPrefsTargetVersionInstalledFrom[] = "target-version-installed-from"; |
| const char kPrefsTargetVersionUniqueId[] = "target-version-unique-id"; |
| const char kPrefsTotalBytesDownloaded[] = "total-bytes-downloaded"; |
| const char kPrefsUpdateCheckCount[] = "update-check-count"; |
| const char kPrefsUpdateCheckResponseHash[] = "update-check-response-hash"; |
| const char kPrefsUpdateCompletedBootTime[] = "update-completed-boot-time"; |
| const char kPrefsUpdateCompletedOnBootId[] = "update-completed-on-boot-id"; |
| const char kPrefsUpdateDurationUptime[] = "update-duration-uptime"; |
| const char kPrefsUpdateFirstSeenAt[] = "update-first-seen-at"; |
| const char kPrefsUpdateOverCellularPermission[] = |
| "update-over-cellular-permission"; |
| const char kPrefsUpdateOverCellularTargetVersion[] = |
| "update-over-cellular-target-version"; |
| const char kPrefsUpdateOverCellularTargetSize[] = |
| "update-over-cellular-target-size"; |
| const char kPrefsUpdateServerCertificate[] = "update-server-cert"; |
| const char kPrefsUpdateStateNextDataLength[] = "update-state-next-data-length"; |
| const char kPrefsUpdateStateNextDataOffset[] = "update-state-next-data-offset"; |
| const char kPrefsUpdateStateNextOperation[] = "update-state-next-operation"; |
| const char kPrefsUpdateStatePayloadIndex[] = "update-state-payload-index"; |
| const char kPrefsUpdateStateSHA256Context[] = "update-state-sha-256-context"; |
| const char kPrefsUpdateStateSignatureBlob[] = "update-state-signature-blob"; |
| const char kPrefsUpdateStateSignedSHA256Context[] = |
| "update-state-signed-sha-256-context"; |
| const char kPrefsUpdateBootTimestampStart[] = "update-boot-timestamp-start"; |
| const char kPrefsUpdateTimestampStart[] = "update-timestamp-start"; |
| const char kPrefsUrlSwitchCount[] = "url-switch-count"; |
| const char kPrefsVerityWritten[] = "verity-written"; |
| const char kPrefsWallClockScatteringWaitPeriod[] = "wall-clock-wait-period"; |
| const char kPrefsWallClockStagingWaitPeriod[] = |
| "wall-clock-staging-wait-period"; |
| const char kPrefsManifestBytes[] = "manifest-bytes"; |
| const char kPrefsPreviousSlot[] = "previous-slot"; |
| |
| // These four fields are generated by scripts/brillo_update_payload. |
| const char kPayloadPropertyFileSize[] = "FILE_SIZE"; |
| const char kPayloadPropertyFileHash[] = "FILE_HASH"; |
| const char kPayloadPropertyMetadataSize[] = "METADATA_SIZE"; |
| const char kPayloadPropertyMetadataHash[] = "METADATA_HASH"; |
| // The Authorization: HTTP header to be sent when downloading the payload. |
| const char kPayloadPropertyAuthorization[] = "AUTHORIZATION"; |
| // The User-Agent HTTP header to be sent when downloading the payload. |
| const char kPayloadPropertyUserAgent[] = "USER_AGENT"; |
| // Set "POWERWASH=1" to powerwash (factory data reset) the device after |
| // applying the update. |
| const char kPayloadPropertyPowerwash[] = "POWERWASH"; |
| // The network id to pass to android_setprocnetwork before downloading. |
| // This can be used to zero-rate OTA traffic by sending it over the correct |
| // network. |
| const char kPayloadPropertyNetworkId[] = "NETWORK_ID"; |
| // Set "SWITCH_SLOT_ON_REBOOT=0" to skip marking the updated partitions active. |
| // The default is 1 (always switch slot if update succeeded). |
| const char kPayloadPropertySwitchSlotOnReboot[] = "SWITCH_SLOT_ON_REBOOT"; |
| // Set "RUN_POST_INSTALL=0" to skip running optional post install. |
| // The default is 1 (always run post install). |
| const char kPayloadPropertyRunPostInstall[] = "RUN_POST_INSTALL"; |
| |
| const char kOmahaUpdaterVersion[] = "0.1.0.0"; |
| |
| // X-Goog-Update headers. |
| const char kXGoogleUpdateInteractivity[] = "X-Goog-Update-Interactivity"; |
| const char kXGoogleUpdateAppId[] = "X-Goog-Update-AppId"; |
| const char kXGoogleUpdateUpdater[] = "X-Goog-Update-Updater"; |
| const char kXGoogleUpdateSessionId[] = "X-Goog-SessionId"; |
| |
| } // namespace chromeos_update_engine |