| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "client/file_sync_client.h" |
| |
| #include <dirent.h> |
| #include <inttypes.h> |
| #include <limits.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <sys/stat.h> |
| #include <sys/time.h> |
| #include <sys/types.h> |
| #include <time.h> |
| #include <unistd.h> |
| #include <utime.h> |
| |
| #include <chrono> |
| #include <deque> |
| #include <functional> |
| #include <memory> |
| #include <sstream> |
| #include <string> |
| #include <variant> |
| #include <vector> |
| |
| #include "sysdeps.h" |
| |
| #include "adb.h" |
| #include "adb_client.h" |
| #include "adb_io.h" |
| #include "adb_utils.h" |
| #include "compression_utils.h" |
| #include "file_sync_protocol.h" |
| #include "line_printer.h" |
| #include "sysdeps/errno.h" |
| #include "sysdeps/stat.h" |
| |
| #include "client/commandline.h" |
| |
| #include <android-base/file.h> |
| #include <android-base/strings.h> |
| #include <android-base/stringprintf.h> |
| |
| using namespace std::literals; |
| |
| typedef void(sync_ls_cb)(unsigned mode, uint64_t size, uint64_t time, const char* name); |
| |
| struct syncsendbuf { |
| unsigned id; |
| unsigned size; |
| char data[SYNC_DATA_MAX]; |
| }; |
| |
| static void ensure_trailing_separators(std::string& local_path, std::string& remote_path) { |
| if (!adb_is_separator(local_path.back())) { |
| local_path.push_back(OS_PATH_SEPARATOR); |
| } |
| if (remote_path.back() != '/') { |
| remote_path.push_back('/'); |
| } |
| } |
| |
| static bool should_pull_file(mode_t mode) { |
| return S_ISREG(mode) || S_ISBLK(mode) || S_ISCHR(mode); |
| } |
| |
| static bool should_push_file(mode_t mode) { |
| return S_ISREG(mode) || S_ISLNK(mode); |
| } |
| |
| struct copyinfo { |
| std::string lpath; |
| std::string rpath; |
| int64_t time = 0; |
| uint32_t mode; |
| uint64_t size = 0; |
| bool skip = false; |
| |
| copyinfo(const std::string& local_path, |
| const std::string& remote_path, |
| const std::string& name, |
| unsigned int mode) |
| : lpath(local_path), rpath(remote_path), mode(mode) { |
| ensure_trailing_separators(lpath, rpath); |
| lpath.append(name); |
| rpath.append(name); |
| if (S_ISDIR(mode)) { |
| ensure_trailing_separators(lpath, rpath); |
| } |
| } |
| }; |
| |
| enum class TransferDirection { |
| push, |
| pull, |
| }; |
| |
| struct TransferLedger { |
| std::chrono::steady_clock::time_point start_time; |
| uint64_t files_transferred; |
| uint64_t files_skipped; |
| uint64_t bytes_transferred; |
| uint64_t bytes_expected; |
| bool expect_multiple_files; |
| |
| private: |
| std::string last_progress_str; |
| std::chrono::steady_clock::time_point last_progress_time; |
| |
| public: |
| TransferLedger() { |
| Reset(); |
| } |
| |
| bool operator==(const TransferLedger& other) const { |
| return files_transferred == other.files_transferred && |
| files_skipped == other.files_skipped && bytes_transferred == other.bytes_transferred; |
| } |
| |
| bool operator!=(const TransferLedger& other) const { |
| return !(*this == other); |
| } |
| |
| void Reset() { |
| start_time = std::chrono::steady_clock::now(); |
| files_transferred = 0; |
| files_skipped = 0; |
| bytes_transferred = 0; |
| bytes_expected = 0; |
| last_progress_str.clear(); |
| last_progress_time = {}; |
| } |
| |
| std::string TransferRate() { |
| if (bytes_transferred == 0) return ""; |
| |
| std::chrono::duration<double> duration; |
| duration = std::chrono::steady_clock::now() - start_time; |
| |
| double s = duration.count(); |
| if (s == 0) { |
| return ""; |
| } |
| double rate = (static_cast<double>(bytes_transferred) / s) / (1024 * 1024); |
| return android::base::StringPrintf(" %.1f MB/s (%" PRIu64 " bytes in %.3fs)", rate, |
| bytes_transferred, s); |
| } |
| |
| void ReportProgress(LinePrinter& lp, const std::string& file, uint64_t file_copied_bytes, |
| uint64_t file_total_bytes) { |
| static constexpr auto kProgressReportInterval = 100ms; |
| |
| auto now = std::chrono::steady_clock::now(); |
| if (now < last_progress_time + kProgressReportInterval) { |
| return; |
| } |
| char overall_percentage_str[5] = "?"; |
| if (bytes_expected != 0 && bytes_transferred <= bytes_expected) { |
| int overall_percentage = static_cast<int>(bytes_transferred * 100 / bytes_expected); |
| // If we're pulling symbolic links, we'll pull the target of the link rather than |
| // just create a local link, and that will cause us to go over 100%. |
| if (overall_percentage <= 100) { |
| snprintf(overall_percentage_str, sizeof(overall_percentage_str), "%d%%", |
| overall_percentage); |
| } |
| } |
| |
| std::string output; |
| if (file_copied_bytes > file_total_bytes || file_total_bytes == 0) { |
| // This case can happen if we're racing against something that wrote to the file |
| // between our stat and our read, or if we're reading a magic file that lies about |
| // its size. Just show how much we've copied. |
| output = android::base::StringPrintf("[%4s] %s: %" PRId64 "/?", overall_percentage_str, |
| file.c_str(), file_copied_bytes); |
| } else { |
| // If we're transferring multiple files, we want to know how far through the current |
| // file we are, as well as the overall percentage. |
| if (expect_multiple_files) { |
| int file_percentage = static_cast<int>(file_copied_bytes * 100 / file_total_bytes); |
| output = android::base::StringPrintf("[%4s] %s: %d%%", overall_percentage_str, |
| file.c_str(), file_percentage); |
| } else { |
| output = |
| android::base::StringPrintf("[%4s] %s", overall_percentage_str, file.c_str()); |
| } |
| } |
| if (output != last_progress_str) { |
| lp.Print(output, LinePrinter::LineType::INFO); |
| last_progress_str = std::move(output); |
| last_progress_time = now; |
| } |
| } |
| |
| void ReportTransferRate(LinePrinter& lp, const std::string& name, TransferDirection direction) { |
| const char* direction_str = (direction == TransferDirection::push) ? "pushed" : "pulled"; |
| std::stringstream ss; |
| if (!name.empty()) { |
| std::string_view display_name(name); |
| char* out = getenv("ANDROID_PRODUCT_OUT"); |
| if (out) android::base::ConsumePrefix(&display_name, out); |
| ss << display_name << ": "; |
| } |
| ss << files_transferred << " file" << ((files_transferred == 1) ? "" : "s") << " " |
| << direction_str << ", " << files_skipped << " skipped."; |
| ss << TransferRate(); |
| |
| lp.Print(ss.str(), LinePrinter::LineType::INFO); |
| lp.KeepInfoLine(); |
| } |
| }; |
| |
| class SyncConnection { |
| public: |
| SyncConnection() : acknowledgement_buffer_(sizeof(sync_status) + SYNC_DATA_MAX) { |
| acknowledgement_buffer_.resize(0); |
| max = SYNC_DATA_MAX; // TODO: decide at runtime. |
| |
| std::string error; |
| auto&& features = adb_get_feature_set(&error); |
| if (!features) { |
| Error("failed to get feature set: %s", error.c_str()); |
| } else { |
| features_ = &*features; |
| have_stat_v2_ = CanUseFeature(*features, kFeatureStat2); |
| have_ls_v2_ = CanUseFeature(*features, kFeatureLs2); |
| have_sendrecv_v2_ = CanUseFeature(*features, kFeatureSendRecv2); |
| have_sendrecv_v2_brotli_ = CanUseFeature(*features, kFeatureSendRecv2Brotli); |
| have_sendrecv_v2_lz4_ = CanUseFeature(*features, kFeatureSendRecv2LZ4); |
| have_sendrecv_v2_zstd_ = CanUseFeature(*features, kFeatureSendRecv2Zstd); |
| have_sendrecv_v2_dry_run_send_ = CanUseFeature(*features, kFeatureSendRecv2DryRunSend); |
| std::string error; |
| fd.reset(adb_connect("sync:", &error)); |
| if (fd < 0) { |
| Error("connect failed: %s", error.c_str()); |
| } |
| } |
| } |
| |
| ~SyncConnection() { |
| if (!IsValid()) return; |
| |
| if (SendQuit()) { |
| // We sent a quit command, so the server should be doing orderly |
| // shutdown soon. But if we encountered an error while we were using |
| // the connection, the server might still be sending data (before |
| // doing orderly shutdown), in which case we won't wait for all of |
| // the data nor the coming orderly shutdown. In the common success |
| // case, this will wait for the server to do orderly shutdown. |
| ReadOrderlyShutdown(fd); |
| } |
| |
| line_printer_.KeepInfoLine(); |
| } |
| |
| bool HaveSendRecv2() const { return have_sendrecv_v2_; } |
| bool HaveSendRecv2Brotli() const { return have_sendrecv_v2_brotli_; } |
| bool HaveSendRecv2LZ4() const { return have_sendrecv_v2_lz4_; } |
| bool HaveSendRecv2Zstd() const { return have_sendrecv_v2_zstd_; } |
| bool HaveSendRecv2DryRunSend() const { return have_sendrecv_v2_dry_run_send_; } |
| |
| // Resolve a compression type which might be CompressionType::Any to a specific compression |
| // algorithm. |
| CompressionType ResolveCompressionType(CompressionType compression) const { |
| if (compression == CompressionType::Any) { |
| if (HaveSendRecv2Zstd()) { |
| return CompressionType::Zstd; |
| } else if (HaveSendRecv2LZ4()) { |
| return CompressionType::LZ4; |
| } else if (HaveSendRecv2Brotli()) { |
| return CompressionType::Brotli; |
| } |
| return CompressionType::None; |
| } |
| return compression; |
| } |
| |
| const FeatureSet& Features() const { return *features_; } |
| |
| bool IsValid() { return fd >= 0; } |
| |
| void NewTransfer() { |
| current_ledger_.Reset(); |
| } |
| |
| void RecordBytesTransferred(size_t bytes) { |
| current_ledger_.bytes_transferred += bytes; |
| global_ledger_.bytes_transferred += bytes; |
| } |
| |
| void RecordFileSent(std::string from, std::string to) { |
| RecordFilesTransferred(1); |
| deferred_acknowledgements_.emplace_back(std::move(from), std::move(to)); |
| } |
| |
| void RecordFilesTransferred(size_t files) { |
| current_ledger_.files_transferred += files; |
| global_ledger_.files_transferred += files; |
| } |
| |
| void RecordFilesSkipped(size_t files) { |
| current_ledger_.files_skipped += files; |
| global_ledger_.files_skipped += files; |
| } |
| |
| void ReportProgress(const std::string& file, uint64_t file_copied_bytes, |
| uint64_t file_total_bytes) { |
| current_ledger_.ReportProgress(line_printer_, file, file_copied_bytes, file_total_bytes); |
| } |
| |
| void ReportTransferRate(const std::string& file, TransferDirection direction) { |
| current_ledger_.ReportTransferRate(line_printer_, file, direction); |
| } |
| |
| void ReportOverallTransferRate(TransferDirection direction) { |
| if (current_ledger_ != global_ledger_) { |
| global_ledger_.ReportTransferRate(line_printer_, "", direction); |
| } |
| } |
| |
| bool SendRequest(int id, const std::string& path) { |
| if (path.length() > 1024) { |
| Error("SendRequest failed: path too long: %zu", path.length()); |
| errno = ENAMETOOLONG; |
| return false; |
| } |
| |
| // Sending header and payload in a single write makes a noticeable |
| // difference to "adb sync" performance. |
| std::vector<char> buf(sizeof(SyncRequest) + path.length()); |
| SyncRequest* req = reinterpret_cast<SyncRequest*>(&buf[0]); |
| req->id = id; |
| req->path_length = path.length(); |
| char* data = reinterpret_cast<char*>(req + 1); |
| memcpy(data, path.data(), path.length()); |
| return WriteFdExactly(fd, buf.data(), buf.size()); |
| } |
| |
| bool SendSend2(std::string_view path, mode_t mode, CompressionType compression, bool dry_run) { |
| if (path.length() > 1024) { |
| Error("SendRequest failed: path too long: %zu", path.length()); |
| errno = ENAMETOOLONG; |
| return false; |
| } |
| |
| Block buf; |
| |
| SyncRequest req; |
| req.id = ID_SEND_V2; |
| req.path_length = path.length(); |
| |
| syncmsg msg; |
| msg.send_v2_setup.id = ID_SEND_V2; |
| msg.send_v2_setup.mode = mode; |
| msg.send_v2_setup.flags = 0; |
| switch (compression) { |
| case CompressionType::None: |
| break; |
| |
| case CompressionType::Brotli: |
| msg.send_v2_setup.flags = kSyncFlagBrotli; |
| break; |
| |
| case CompressionType::LZ4: |
| msg.send_v2_setup.flags = kSyncFlagLZ4; |
| break; |
| |
| case CompressionType::Zstd: |
| msg.send_v2_setup.flags = kSyncFlagZstd; |
| break; |
| |
| case CompressionType::Any: |
| LOG(FATAL) << "unexpected CompressionType::Any"; |
| } |
| |
| if (dry_run) { |
| msg.send_v2_setup.flags |= kSyncFlagDryRun; |
| } |
| |
| buf.resize(sizeof(SyncRequest) + path.length() + sizeof(msg.send_v2_setup)); |
| |
| void* p = buf.data(); |
| |
| p = mempcpy(p, &req, sizeof(SyncRequest)); |
| p = mempcpy(p, path.data(), path.length()); |
| p = mempcpy(p, &msg.send_v2_setup, sizeof(msg.send_v2_setup)); |
| |
| return WriteFdExactly(fd, buf.data(), buf.size()); |
| } |
| |
| bool SendRecv2(const std::string& path, CompressionType compression) { |
| if (path.length() > 1024) { |
| Error("SendRequest failed: path too long: %zu", path.length()); |
| errno = ENAMETOOLONG; |
| return false; |
| } |
| |
| Block buf; |
| |
| SyncRequest req; |
| req.id = ID_RECV_V2; |
| req.path_length = path.length(); |
| |
| syncmsg msg; |
| msg.recv_v2_setup.id = ID_RECV_V2; |
| msg.recv_v2_setup.flags = 0; |
| switch (compression) { |
| case CompressionType::None: |
| break; |
| |
| case CompressionType::Brotli: |
| msg.recv_v2_setup.flags |= kSyncFlagBrotli; |
| break; |
| |
| case CompressionType::LZ4: |
| msg.recv_v2_setup.flags |= kSyncFlagLZ4; |
| break; |
| |
| case CompressionType::Zstd: |
| msg.recv_v2_setup.flags |= kSyncFlagZstd; |
| break; |
| |
| case CompressionType::Any: |
| LOG(FATAL) << "unexpected CompressionType::Any"; |
| } |
| |
| buf.resize(sizeof(SyncRequest) + path.length() + sizeof(msg.recv_v2_setup)); |
| |
| void* p = buf.data(); |
| |
| p = mempcpy(p, &req, sizeof(SyncRequest)); |
| p = mempcpy(p, path.data(), path.length()); |
| p = mempcpy(p, &msg.recv_v2_setup, sizeof(msg.recv_v2_setup)); |
| |
| return WriteFdExactly(fd, buf.data(), buf.size()); |
| } |
| |
| bool SendStat(const std::string& path) { |
| if (!have_stat_v2_) { |
| errno = ENOTSUP; |
| return false; |
| } |
| return SendRequest(ID_STAT_V2, path); |
| } |
| |
| bool SendLstat(const std::string& path) { |
| if (have_stat_v2_) { |
| return SendRequest(ID_LSTAT_V2, path); |
| } else { |
| return SendRequest(ID_LSTAT_V1, path); |
| } |
| } |
| |
| bool FinishStat(struct stat* st) { |
| syncmsg msg; |
| |
| memset(st, 0, sizeof(*st)); |
| if (have_stat_v2_) { |
| if (!ReadFdExactly(fd.get(), &msg.stat_v2, sizeof(msg.stat_v2))) { |
| PLOG(FATAL) << "protocol fault: failed to read stat response"; |
| } |
| |
| if (msg.stat_v2.id != ID_LSTAT_V2 && msg.stat_v2.id != ID_STAT_V2) { |
| PLOG(FATAL) << "protocol fault: stat response has wrong message id: " |
| << msg.stat_v2.id; |
| } |
| |
| if (msg.stat_v2.error != 0) { |
| errno = errno_from_wire(msg.stat_v2.error); |
| return false; |
| } |
| |
| st->st_dev = msg.stat_v2.dev; |
| st->st_ino = msg.stat_v2.ino; |
| st->st_mode = msg.stat_v2.mode; |
| st->st_nlink = msg.stat_v2.nlink; |
| st->st_uid = msg.stat_v2.uid; |
| st->st_gid = msg.stat_v2.gid; |
| st->st_size = msg.stat_v2.size; |
| st->st_atime = msg.stat_v2.atime; |
| st->st_mtime = msg.stat_v2.mtime; |
| st->st_ctime = msg.stat_v2.ctime; |
| return true; |
| } else { |
| if (!ReadFdExactly(fd.get(), &msg.stat_v1, sizeof(msg.stat_v1))) { |
| PLOG(FATAL) << "protocol fault: failed to read stat response"; |
| } |
| |
| if (msg.stat_v1.id != ID_LSTAT_V1) { |
| LOG(FATAL) << "protocol fault: stat response has wrong message id: " |
| << msg.stat_v1.id; |
| } |
| |
| if (msg.stat_v1.mode == 0 && msg.stat_v1.size == 0 && msg.stat_v1.mtime == 0) { |
| // There's no way for us to know what the error was. |
| errno = ENOPROTOOPT; |
| return false; |
| } |
| |
| st->st_mode = msg.stat_v1.mode; |
| st->st_size = msg.stat_v1.size; |
| st->st_ctime = msg.stat_v1.mtime; |
| st->st_mtime = msg.stat_v1.mtime; |
| } |
| |
| return true; |
| } |
| |
| bool SendLs(const std::string& path) { |
| return SendRequest(have_ls_v2_ ? ID_LIST_V2 : ID_LIST_V1, path); |
| } |
| |
| private: |
| template <bool v2> |
| static bool FinishLsImpl(borrowed_fd fd, const std::function<sync_ls_cb>& callback) { |
| using dent_type = |
| std::conditional_t<v2, decltype(syncmsg::dent_v2), decltype(syncmsg::dent_v1)>; |
| |
| while (true) { |
| dent_type dent; |
| if (!ReadFdExactly(fd, &dent, sizeof(dent))) return false; |
| |
| uint32_t expected_id = v2 ? ID_DENT_V2 : ID_DENT_V1; |
| if (dent.id == ID_DONE) return true; |
| if (dent.id != expected_id) return false; |
| |
| // Maximum length of a file name excluding null terminator (NAME_MAX) on Linux is 255. |
| char buf[256]; |
| size_t len = dent.namelen; |
| if (len > 255) return false; |
| |
| if (!ReadFdExactly(fd, buf, len)) return false; |
| buf[len] = 0; |
| |
| // Address the highly unlikely scenario wherein a |
| // compromised device/service might be able to |
| // traverse across directories on the host. Let's |
| // shut that door! |
| if (strchr(buf, '/')) { |
| return false; |
| } |
| |
| callback(dent.mode, dent.size, dent.mtime, buf); |
| } |
| } |
| |
| public: |
| bool FinishLs(const std::function<sync_ls_cb>& callback) { |
| if (have_ls_v2_) { |
| return FinishLsImpl<true>(this->fd, callback); |
| } else { |
| return FinishLsImpl<false>(this->fd, callback); |
| } |
| } |
| |
| // Sending header, payload, and footer in a single write makes a huge |
| // difference to "adb sync" performance. |
| bool SendSmallFile(const std::string& path, mode_t mode, const std::string& lpath, |
| const std::string& rpath, unsigned mtime, const char* data, |
| size_t data_length, bool dry_run) { |
| if (dry_run) { |
| // We need to use send v2 for dry run. |
| return SendLargeFile(path, mode, lpath, rpath, mtime, CompressionType::None, dry_run); |
| } |
| |
| std::string path_and_mode = android::base::StringPrintf("%s,%d", path.c_str(), mode); |
| if (path_and_mode.length() > 1024) { |
| Error("SendSmallFile failed: path too long: %zu", path_and_mode.length()); |
| errno = ENAMETOOLONG; |
| return false; |
| } |
| |
| std::vector<char> buf(sizeof(SyncRequest) + path_and_mode.length() + sizeof(SyncRequest) + |
| data_length + sizeof(SyncRequest)); |
| char* p = &buf[0]; |
| |
| SyncRequest* req_send = reinterpret_cast<SyncRequest*>(p); |
| req_send->id = ID_SEND_V1; |
| req_send->path_length = path_and_mode.length(); |
| p += sizeof(SyncRequest); |
| memcpy(p, path_and_mode.data(), path_and_mode.size()); |
| p += path_and_mode.length(); |
| |
| SyncRequest* req_data = reinterpret_cast<SyncRequest*>(p); |
| req_data->id = ID_DATA; |
| req_data->path_length = data_length; |
| p += sizeof(SyncRequest); |
| memcpy(p, data, data_length); |
| p += data_length; |
| |
| SyncRequest* req_done = reinterpret_cast<SyncRequest*>(p); |
| req_done->id = ID_DONE; |
| req_done->path_length = mtime; |
| p += sizeof(SyncRequest); |
| |
| WriteOrDie(lpath, rpath, &buf[0], (p - &buf[0])); |
| |
| RecordFileSent(lpath, rpath); |
| RecordBytesTransferred(data_length); |
| ReportProgress(rpath, data_length, data_length); |
| return true; |
| } |
| |
| bool SendLargeFile(const std::string& path, mode_t mode, const std::string& lpath, |
| const std::string& rpath, unsigned mtime, CompressionType compression, |
| bool dry_run) { |
| if (dry_run && !HaveSendRecv2DryRunSend()) { |
| Error("dry-run not supported by the device"); |
| return false; |
| } |
| |
| if (!HaveSendRecv2()) { |
| return SendLargeFileLegacy(path, mode, lpath, rpath, mtime); |
| } |
| |
| compression = ResolveCompressionType(compression); |
| |
| if (!SendSend2(path, mode, compression, dry_run)) { |
| Error("failed to send ID_SEND_V2 message '%s': %s", path.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| struct stat st; |
| if (stat(lpath.c_str(), &st) == -1) { |
| Error("cannot stat '%s': %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| uint64_t total_size = st.st_size; |
| uint64_t bytes_copied = 0; |
| |
| unique_fd lfd(adb_open(lpath.c_str(), O_RDONLY | O_CLOEXEC)); |
| if (lfd < 0) { |
| Error("opening '%s' locally failed: %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| syncsendbuf sbuf; |
| sbuf.id = ID_DATA; |
| |
| std::variant<std::monostate, NullEncoder, BrotliEncoder, LZ4Encoder, ZstdEncoder> |
| encoder_storage; |
| Encoder* encoder = nullptr; |
| switch (compression) { |
| case CompressionType::None: |
| encoder = &encoder_storage.emplace<NullEncoder>(SYNC_DATA_MAX); |
| break; |
| |
| case CompressionType::Brotli: |
| encoder = &encoder_storage.emplace<BrotliEncoder>(SYNC_DATA_MAX); |
| break; |
| |
| case CompressionType::LZ4: |
| encoder = &encoder_storage.emplace<LZ4Encoder>(SYNC_DATA_MAX); |
| break; |
| |
| case CompressionType::Zstd: |
| encoder = &encoder_storage.emplace<ZstdEncoder>(SYNC_DATA_MAX); |
| break; |
| |
| case CompressionType::Any: |
| LOG(FATAL) << "unexpected CompressionType::Any"; |
| } |
| |
| bool sending = true; |
| while (sending) { |
| Block input(SYNC_DATA_MAX); |
| int r = adb_read(lfd.get(), input.data(), input.size()); |
| if (r < 0) { |
| Error("reading '%s' locally failed: %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| if (r == 0) { |
| encoder->Finish(); |
| } else { |
| input.resize(r); |
| encoder->Append(std::move(input)); |
| RecordBytesTransferred(r); |
| bytes_copied += r; |
| ReportProgress(rpath, bytes_copied, total_size); |
| } |
| |
| while (true) { |
| Block output; |
| EncodeResult result = encoder->Encode(&output); |
| if (result == EncodeResult::Error) { |
| Error("compressing '%s' locally failed", lpath.c_str()); |
| return false; |
| } |
| |
| if (!output.empty()) { |
| sbuf.size = output.size(); |
| memcpy(sbuf.data, output.data(), output.size()); |
| WriteOrDie(lpath, rpath, &sbuf, sizeof(SyncRequest) + output.size()); |
| } |
| |
| if (result == EncodeResult::Done) { |
| sending = false; |
| break; |
| } else if (result == EncodeResult::NeedInput) { |
| break; |
| } else if (result == EncodeResult::MoreOutput) { |
| continue; |
| } |
| } |
| } |
| |
| syncmsg msg; |
| msg.data.id = ID_DONE; |
| msg.data.size = mtime; |
| RecordFileSent(lpath, rpath); |
| return WriteOrDie(lpath, rpath, &msg.data, sizeof(msg.data)); |
| } |
| |
| bool SendLargeFileLegacy(const std::string& path, mode_t mode, const std::string& lpath, |
| const std::string& rpath, unsigned mtime) { |
| std::string path_and_mode = android::base::StringPrintf("%s,%d", path.c_str(), mode); |
| if (!SendRequest(ID_SEND_V1, path_and_mode)) { |
| Error("failed to send ID_SEND_V1 message '%s': %s", path_and_mode.c_str(), |
| strerror(errno)); |
| return false; |
| } |
| |
| struct stat st; |
| if (stat(lpath.c_str(), &st) == -1) { |
| Error("cannot stat '%s': %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| uint64_t total_size = st.st_size; |
| uint64_t bytes_copied = 0; |
| |
| unique_fd lfd(adb_open(lpath.c_str(), O_RDONLY | O_CLOEXEC)); |
| if (lfd < 0) { |
| Error("opening '%s' locally failed: %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| syncsendbuf sbuf; |
| sbuf.id = ID_DATA; |
| |
| while (true) { |
| int bytes_read = adb_read(lfd, sbuf.data, max); |
| if (bytes_read == -1) { |
| Error("reading '%s' locally failed: %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } else if (bytes_read == 0) { |
| break; |
| } |
| |
| sbuf.size = bytes_read; |
| WriteOrDie(lpath, rpath, &sbuf, sizeof(SyncRequest) + bytes_read); |
| |
| RecordBytesTransferred(bytes_read); |
| bytes_copied += bytes_read; |
| ReportProgress(rpath, bytes_copied, total_size); |
| } |
| |
| syncmsg msg; |
| msg.data.id = ID_DONE; |
| msg.data.size = mtime; |
| RecordFileSent(lpath, rpath); |
| return WriteOrDie(lpath, rpath, &msg.data, sizeof(msg.data)); |
| } |
| |
| bool ReportCopyFailure(const std::string& from, const std::string& to, const syncmsg& msg) { |
| std::vector<char> buf(msg.status.msglen + 1); |
| if (!ReadFdExactly(fd, &buf[0], msg.status.msglen)) { |
| Error("failed to copy '%s' to '%s'; failed to read reason (!): %s", from.c_str(), |
| to.c_str(), strerror(errno)); |
| return false; |
| } |
| buf[msg.status.msglen] = 0; |
| Error("failed to copy '%s' to '%s': remote %s", from.c_str(), to.c_str(), &buf[0]); |
| return false; |
| } |
| |
| void CopyDone() { deferred_acknowledgements_.pop_front(); } |
| |
| void ReportDeferredCopyFailure(const std::string& msg) { |
| auto& [from, to] = deferred_acknowledgements_.front(); |
| Error("failed to copy '%s' to '%s': remote %s", from.c_str(), to.c_str(), msg.c_str()); |
| deferred_acknowledgements_.pop_front(); |
| } |
| |
| bool ReadAcknowledgements(bool read_all = false) { |
| // We need to read enough such that adbd's intermediate socket's write buffer can't be |
| // full. The default buffer on Linux is 212992 bytes, but there's 576 bytes of bookkeeping |
| // overhead per write. The worst case scenario is a continuous string of failures, since |
| // each logical packet is divided into two writes. If our packet size if conservatively 512 |
| // bytes long, this leaves us with space for 128 responses. |
| constexpr size_t max_deferred_acks = 128; |
| auto& buf = acknowledgement_buffer_; |
| adb_pollfd pfd = {.fd = fd.get(), .events = POLLIN}; |
| while (!deferred_acknowledgements_.empty()) { |
| bool should_block = read_all || deferred_acknowledgements_.size() >= max_deferred_acks; |
| |
| ssize_t rc = adb_poll(&pfd, 1, should_block ? -1 : 0); |
| if (rc == 0) { |
| CHECK(!should_block); |
| return true; |
| } |
| |
| if (acknowledgement_buffer_.size() < sizeof(sync_status)) { |
| const ssize_t header_bytes_left = sizeof(sync_status) - buf.size(); |
| ssize_t rc = adb_read(fd, buf.end(), header_bytes_left); |
| if (rc <= 0) { |
| Error("failed to read copy response"); |
| return false; |
| } |
| |
| buf.resize(buf.size() + rc); |
| if (rc != header_bytes_left) { |
| // Early exit if we run out of data in the socket. |
| return true; |
| } |
| |
| if (!should_block) { |
| // We don't want to read again yet, because the socket might be empty. |
| continue; |
| } |
| } |
| |
| auto* hdr = reinterpret_cast<sync_status*>(buf.data()); |
| if (hdr->id == ID_OKAY) { |
| buf.resize(0); |
| if (hdr->msglen != 0) { |
| Error("received ID_OKAY with msg_len (%" PRIu32 " != 0", hdr->msglen); |
| return false; |
| } |
| CopyDone(); |
| continue; |
| } else if (hdr->id != ID_FAIL) { |
| Error("unexpected response from daemon: id = %#" PRIx32, hdr->id); |
| return false; |
| } else if (hdr->msglen > SYNC_DATA_MAX) { |
| Error("too-long message length from daemon: msglen = %" PRIu32, hdr->msglen); |
| return false; |
| } |
| |
| const ssize_t msg_bytes_left = hdr->msglen + sizeof(sync_status) - buf.size(); |
| CHECK_GE(msg_bytes_left, 0); |
| if (msg_bytes_left > 0) { |
| ssize_t rc = adb_read(fd, buf.end(), msg_bytes_left); |
| if (rc <= 0) { |
| Error("failed to read copy failure message"); |
| return false; |
| } |
| |
| buf.resize(buf.size() + rc); |
| if (rc != msg_bytes_left) { |
| if (should_block) { |
| continue; |
| } else { |
| return true; |
| } |
| } |
| |
| std::string msg(buf.begin() + sizeof(sync_status), buf.end()); |
| ReportDeferredCopyFailure(msg); |
| buf.resize(0); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| void Printf(const char* fmt, ...) __attribute__((__format__(__printf__, 2, 3))) { |
| std::string s; |
| |
| va_list ap; |
| va_start(ap, fmt); |
| android::base::StringAppendV(&s, fmt, ap); |
| va_end(ap); |
| |
| line_printer_.Print(s, LinePrinter::INFO); |
| } |
| |
| void Println(const char* fmt, ...) __attribute__((__format__(__printf__, 2, 3))) { |
| std::string s; |
| |
| va_list ap; |
| va_start(ap, fmt); |
| android::base::StringAppendV(&s, fmt, ap); |
| va_end(ap); |
| |
| line_printer_.Print(s, LinePrinter::INFO); |
| line_printer_.KeepInfoLine(); |
| } |
| |
| void Error(const char* fmt, ...) __attribute__((__format__(__printf__, 2, 3))) { |
| std::string s = "adb: error: "; |
| |
| va_list ap; |
| va_start(ap, fmt); |
| android::base::StringAppendV(&s, fmt, ap); |
| va_end(ap); |
| |
| line_printer_.Print(s, LinePrinter::ERROR); |
| } |
| |
| void Warning(const char* fmt, ...) __attribute__((__format__(__printf__, 2, 3))) { |
| std::string s = "adb: warning: "; |
| |
| va_list ap; |
| va_start(ap, fmt); |
| android::base::StringAppendV(&s, fmt, ap); |
| va_end(ap); |
| |
| line_printer_.Print(s, LinePrinter::WARNING); |
| } |
| |
| void ComputeExpectedTotalBytes(const std::vector<copyinfo>& file_list) { |
| current_ledger_.bytes_expected = 0; |
| for (const copyinfo& ci : file_list) { |
| // Unfortunately, this doesn't work for symbolic links, because we'll copy the |
| // target of the link rather than just creating a link. (But ci.size is the link size.) |
| if (!ci.skip) current_ledger_.bytes_expected += ci.size; |
| } |
| current_ledger_.expect_multiple_files = true; |
| } |
| |
| void SetExpectedTotalBytes(uint64_t expected_total_bytes) { |
| current_ledger_.bytes_expected = expected_total_bytes; |
| current_ledger_.expect_multiple_files = false; |
| } |
| |
| // TODO: add a char[max] buffer here, to replace syncsendbuf... |
| unique_fd fd; |
| size_t max; |
| |
| private: |
| std::deque<std::pair<std::string, std::string>> deferred_acknowledgements_; |
| Block acknowledgement_buffer_; |
| const FeatureSet* features_ = nullptr; |
| bool have_stat_v2_; |
| bool have_ls_v2_; |
| bool have_sendrecv_v2_; |
| bool have_sendrecv_v2_brotli_; |
| bool have_sendrecv_v2_lz4_; |
| bool have_sendrecv_v2_zstd_; |
| bool have_sendrecv_v2_dry_run_send_; |
| |
| TransferLedger global_ledger_; |
| TransferLedger current_ledger_; |
| LinePrinter line_printer_; |
| |
| bool SendQuit() { |
| return SendRequest(ID_QUIT, ""); // TODO: add a SendResponse? |
| } |
| |
| bool WriteOrDie(const std::string& from, const std::string& to, const void* data, |
| size_t data_length) { |
| if (!WriteFdExactly(fd, data, data_length)) { |
| if (errno == ECONNRESET) { |
| // Assume adbd told us why it was closing the connection, and |
| // try to read failure reason from adbd. |
| syncmsg msg; |
| if (!ReadFdExactly(fd, &msg.status, sizeof(msg.status))) { |
| Error("failed to copy '%s' to '%s': no response: %s", from.c_str(), to.c_str(), |
| strerror(errno)); |
| } else if (msg.status.id != ID_FAIL) { |
| Error("failed to copy '%s' to '%s': not ID_FAIL: %d", from.c_str(), to.c_str(), |
| msg.status.id); |
| } else { |
| ReportCopyFailure(from, to, msg); |
| } |
| } else { |
| Error("%zu-byte write failed: %s", data_length, strerror(errno)); |
| } |
| _exit(1); |
| } |
| return true; |
| } |
| }; |
| |
| static bool sync_ls(SyncConnection& sc, const std::string& path, |
| const std::function<sync_ls_cb>& func) { |
| return sc.SendLs(path) && sc.FinishLs(func); |
| } |
| |
| static bool sync_stat(SyncConnection& sc, const std::string& path, struct stat* st) { |
| return sc.SendStat(path) && sc.FinishStat(st); |
| } |
| |
| static bool sync_lstat(SyncConnection& sc, const std::string& path, struct stat* st) { |
| return sc.SendLstat(path) && sc.FinishStat(st); |
| } |
| |
| static bool sync_stat_fallback(SyncConnection& sc, const std::string& path, struct stat* st) { |
| if (sync_stat(sc, path, st)) { |
| return true; |
| } |
| |
| if (errno != ENOTSUP) { |
| return false; |
| } |
| |
| // Try to emulate the parts we can when talking to older adbds. |
| bool lstat_result = sync_lstat(sc, path, st); |
| if (!lstat_result) { |
| return false; |
| } |
| |
| if (S_ISLNK(st->st_mode)) { |
| // If the target is a symlink, figure out whether it's a file or a directory. |
| // Also, zero out the st_size field, since no one actually cares what the path length is. |
| st->st_size = 0; |
| std::string dir_path = path; |
| dir_path.push_back('/'); |
| struct stat tmp_st; |
| |
| st->st_mode &= ~S_IFMT; |
| if (sync_lstat(sc, dir_path, &tmp_st)) { |
| st->st_mode |= S_IFDIR; |
| } else { |
| st->st_mode |= S_IFREG; |
| } |
| } |
| return true; |
| } |
| |
| static bool sync_send(SyncConnection& sc, const std::string& lpath, const std::string& rpath, |
| unsigned mtime, mode_t mode, bool sync, CompressionType compression, |
| bool dry_run) { |
| if (sync) { |
| struct stat st; |
| if (sync_lstat(sc, rpath, &st)) { |
| if (st.st_mtime == static_cast<time_t>(mtime)) { |
| sc.RecordFilesSkipped(1); |
| return true; |
| } |
| } |
| } |
| |
| if (S_ISLNK(mode)) { |
| #if !defined(_WIN32) |
| char buf[PATH_MAX]; |
| ssize_t data_length = readlink(lpath.c_str(), buf, PATH_MAX - 1); |
| if (data_length == -1) { |
| sc.Error("readlink '%s' failed: %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| buf[data_length++] = '\0'; |
| |
| if (!sc.SendSmallFile(rpath, mode, lpath, rpath, mtime, buf, data_length, dry_run)) { |
| return false; |
| } |
| return sc.ReadAcknowledgements(sync); |
| #endif |
| } |
| |
| struct stat st; |
| if (stat(lpath.c_str(), &st) == -1) { |
| sc.Error("failed to stat local file '%s': %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| if (st.st_size < SYNC_DATA_MAX) { |
| std::string data; |
| if (!android::base::ReadFileToString(lpath, &data, true)) { |
| sc.Error("failed to read all of '%s': %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| if (!sc.SendSmallFile(rpath, mode, lpath, rpath, mtime, data.data(), data.size(), |
| dry_run)) { |
| return false; |
| } |
| } else { |
| if (!sc.SendLargeFile(rpath, mode, lpath, rpath, mtime, compression, dry_run)) { |
| return false; |
| } |
| } |
| return sc.ReadAcknowledgements(sync); |
| } |
| |
| static bool sync_recv_v1(SyncConnection& sc, const char* rpath, const char* lpath, const char* name, |
| uint64_t expected_size) { |
| if (!sc.SendRequest(ID_RECV_V1, rpath)) return false; |
| |
| adb_unlink(lpath); |
| unique_fd lfd(adb_creat(lpath, 0644)); |
| if (lfd < 0) { |
| sc.Error("cannot create '%s': %s", lpath, strerror(errno)); |
| return false; |
| } |
| |
| uint64_t bytes_copied = 0; |
| while (true) { |
| syncmsg msg; |
| if (!ReadFdExactly(sc.fd, &msg.data, sizeof(msg.data))) { |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| if (msg.data.id == ID_DONE) break; |
| |
| if (msg.data.id != ID_DATA) { |
| adb_unlink(lpath); |
| sc.ReportCopyFailure(rpath, lpath, msg); |
| return false; |
| } |
| |
| if (msg.data.size > sc.max) { |
| sc.Error("msg.data.size too large: %u (max %zu)", msg.data.size, sc.max); |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| char buffer[SYNC_DATA_MAX]; |
| if (!ReadFdExactly(sc.fd, buffer, msg.data.size)) { |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| if (!WriteFdExactly(lfd, buffer, msg.data.size)) { |
| sc.Error("cannot write '%s': %s", lpath, strerror(errno)); |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| bytes_copied += msg.data.size; |
| |
| sc.RecordBytesTransferred(msg.data.size); |
| sc.ReportProgress(name != nullptr ? name : rpath, bytes_copied, expected_size); |
| } |
| |
| sc.RecordFilesTransferred(1); |
| return true; |
| } |
| |
| static bool sync_recv_v2(SyncConnection& sc, const char* rpath, const char* lpath, const char* name, |
| uint64_t expected_size, CompressionType compression) { |
| compression = sc.ResolveCompressionType(compression); |
| |
| if (!sc.SendRecv2(rpath, compression)) return false; |
| |
| adb_unlink(lpath); |
| unique_fd lfd(adb_creat(lpath, 0644)); |
| if (lfd < 0) { |
| sc.Error("cannot create '%s': %s", lpath, strerror(errno)); |
| return false; |
| } |
| |
| uint64_t bytes_copied = 0; |
| |
| Block buffer(SYNC_DATA_MAX); |
| std::variant<std::monostate, NullDecoder, BrotliDecoder, LZ4Decoder, ZstdDecoder> |
| decoder_storage; |
| Decoder* decoder = nullptr; |
| |
| std::span buffer_span(buffer.data(), buffer.size()); |
| switch (compression) { |
| case CompressionType::None: |
| decoder = &decoder_storage.emplace<NullDecoder>(buffer_span); |
| break; |
| |
| case CompressionType::Brotli: |
| decoder = &decoder_storage.emplace<BrotliDecoder>(buffer_span); |
| break; |
| |
| case CompressionType::LZ4: |
| decoder = &decoder_storage.emplace<LZ4Decoder>(buffer_span); |
| break; |
| |
| case CompressionType::Zstd: |
| decoder = &decoder_storage.emplace<ZstdDecoder>(buffer_span); |
| break; |
| |
| case CompressionType::Any: |
| LOG(FATAL) << "unexpected CompressionType::Any"; |
| } |
| |
| while (true) { |
| syncmsg msg; |
| if (!ReadFdExactly(sc.fd, &msg.data, sizeof(msg.data))) { |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| if (msg.data.id == ID_DONE) { |
| if (!decoder->Finish()) { |
| sc.Error("unexpected ID_DONE"); |
| return false; |
| } |
| } else if (msg.data.id != ID_DATA) { |
| adb_unlink(lpath); |
| sc.ReportCopyFailure(rpath, lpath, msg); |
| return false; |
| } else { |
| if (msg.data.size > sc.max) { |
| sc.Error("msg.data.size too large: %u (max %zu)", msg.data.size, sc.max); |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| Block block(msg.data.size); |
| if (!ReadFdExactly(sc.fd, block.data(), msg.data.size)) { |
| adb_unlink(lpath); |
| return false; |
| } |
| decoder->Append(std::move(block)); |
| } |
| |
| while (true) { |
| std::span<char> output; |
| DecodeResult result = decoder->Decode(&output); |
| |
| if (result == DecodeResult::Error) { |
| sc.Error("decompress failed"); |
| adb_unlink(lpath); |
| return false; |
| } |
| |
| if (!output.empty()) { |
| if (!WriteFdExactly(lfd, output.data(), output.size())) { |
| sc.Error("cannot write '%s': %s", lpath, strerror(errno)); |
| adb_unlink(lpath); |
| return false; |
| } |
| } |
| |
| bytes_copied += output.size(); |
| sc.RecordBytesTransferred(output.size()); |
| sc.ReportProgress(name != nullptr ? name : rpath, bytes_copied, expected_size); |
| |
| if (result == DecodeResult::NeedInput) { |
| break; |
| } else if (result == DecodeResult::MoreOutput) { |
| continue; |
| } else if (result == DecodeResult::Done) { |
| sc.RecordFilesTransferred(1); |
| return true; |
| } else { |
| LOG(FATAL) << "invalid DecodeResult: " << static_cast<int>(result); |
| } |
| } |
| } |
| } |
| |
| static bool sync_recv(SyncConnection& sc, const char* rpath, const char* lpath, const char* name, |
| uint64_t expected_size, CompressionType compression) { |
| if (sc.HaveSendRecv2()) { |
| return sync_recv_v2(sc, rpath, lpath, name, expected_size, compression); |
| } else { |
| return sync_recv_v1(sc, rpath, lpath, name, expected_size); |
| } |
| } |
| |
| bool do_sync_ls(const char* path) { |
| SyncConnection sc; |
| if (!sc.IsValid()) return false; |
| |
| return sync_ls(sc, path, [](unsigned mode, uint64_t size, uint64_t time, const char* name) { |
| printf("%08x %08" PRIx64 " %08" PRIx64 " %s\n", mode, size, time, name); |
| }); |
| } |
| |
| static bool IsDotOrDotDot(const char* name) { |
| return name[0] == '.' && (name[1] == '\0' || (name[1] == '.' && name[2] == '\0')); |
| } |
| |
| static bool local_build_list(SyncConnection& sc, std::vector<copyinfo>* file_list, |
| std::vector<std::string>* directory_list, const std::string& lpath, |
| const std::string& rpath) { |
| std::vector<copyinfo> dirlist; |
| std::unique_ptr<DIR, int (*)(DIR*)> dir(opendir(lpath.c_str()), closedir); |
| if (!dir) { |
| sc.Error("cannot open '%s': %s", lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| bool empty_dir = true; |
| dirent* de; |
| while ((de = readdir(dir.get()))) { |
| if (IsDotOrDotDot(de->d_name)) { |
| continue; |
| } |
| |
| empty_dir = false; |
| std::string stat_path = lpath + de->d_name; |
| |
| struct stat st; |
| if (lstat(stat_path.c_str(), &st) == -1) { |
| sc.Error("cannot lstat '%s': %s", stat_path.c_str(), |
| strerror(errno)); |
| continue; |
| } |
| |
| copyinfo ci(lpath, rpath, de->d_name, st.st_mode); |
| if (S_ISDIR(st.st_mode)) { |
| dirlist.push_back(ci); |
| } else { |
| if (!should_push_file(st.st_mode)) { |
| sc.Warning("skipping special file '%s' (mode = 0o%o)", lpath.c_str(), st.st_mode); |
| ci.skip = true; |
| } |
| ci.time = st.st_mtime; |
| ci.size = st.st_size; |
| file_list->push_back(ci); |
| } |
| } |
| |
| // Close this directory and recurse. |
| dir.reset(); |
| |
| for (const copyinfo& ci : dirlist) { |
| directory_list->push_back(ci.rpath); |
| local_build_list(sc, file_list, directory_list, ci.lpath, ci.rpath); |
| } |
| |
| return true; |
| } |
| |
| // dirname("//foo") returns "//", so we can't do the obvious `path == "/"`. |
| static bool is_root_dir(std::string_view path) { |
| for (char c : path) { |
| if (c != '/') { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static bool copy_local_dir_remote(SyncConnection& sc, std::string lpath, std::string rpath, |
| bool check_timestamps, bool list_only, |
| CompressionType compression, bool dry_run) { |
| sc.NewTransfer(); |
| |
| // Make sure that both directory paths end in a slash. |
| // Both paths are known to be nonempty, so we don't need to check. |
| ensure_trailing_separators(lpath, rpath); |
| |
| // Recursively build the list of files to copy. |
| std::vector<copyinfo> file_list; |
| std::vector<std::string> directory_list; |
| |
| for (std::string path = rpath; !is_root_dir(path); path = android::base::Dirname(path)) { |
| directory_list.push_back(path); |
| } |
| std::reverse(directory_list.begin(), directory_list.end()); |
| |
| int skipped = 0; |
| if (!local_build_list(sc, &file_list, &directory_list, lpath, rpath)) { |
| return false; |
| } |
| |
| // b/110953234: |
| // P shipped with a bug that causes directory creation as a side-effect of a push to fail. |
| // Work around this by explicitly doing a mkdir via shell. |
| // |
| // Devices that don't support shell_v2 are unhappy if we try to send a too-long packet to them, |
| // but they're not affected by this bug, so only apply the workaround if we have shell_v2. |
| // |
| // TODO(b/25457350): We don't preserve permissions on directories. |
| // TODO: Find all of the leaves and `mkdir -p` them instead? |
| if (!CanUseFeature(sc.Features(), kFeatureFixedPushMkdir) && |
| CanUseFeature(sc.Features(), kFeatureShell2)) { |
| SilentStandardStreamsCallbackInterface cb; |
| std::string cmd = "mkdir"; |
| for (const auto& dir : directory_list) { |
| std::string escaped_path = escape_arg(dir); |
| if (escaped_path.size() > 16384) { |
| // Somewhat arbitrarily limit that probably won't ever happen. |
| sc.Error("path too long: %s", escaped_path.c_str()); |
| return false; |
| } |
| |
| // The maximum should be 64kiB, but that's not including other stuff that gets tacked |
| // onto the command line, so let's be a bit conservative. |
| if (cmd.size() + escaped_path.size() > 32768) { |
| // Dispatch the command, ignoring failure (since the directory might already exist). |
| send_shell_command(cmd, false, &cb); |
| cmd = "mkdir"; |
| } |
| cmd += " "; |
| cmd += escaped_path; |
| } |
| |
| if (cmd != "mkdir") { |
| send_shell_command(cmd, false, &cb); |
| } |
| } |
| |
| if (check_timestamps) { |
| for (const copyinfo& ci : file_list) { |
| if (!sc.SendLstat(ci.rpath)) { |
| sc.Error("failed to send lstat"); |
| return false; |
| } |
| } |
| for (copyinfo& ci : file_list) { |
| struct stat st; |
| if (sc.FinishStat(&st)) { |
| if (st.st_size == static_cast<off_t>(ci.size) && st.st_mtime == ci.time) { |
| ci.skip = true; |
| } |
| } |
| } |
| } |
| |
| sc.ComputeExpectedTotalBytes(file_list); |
| |
| for (const copyinfo& ci : file_list) { |
| if (!ci.skip) { |
| if (list_only) { |
| sc.Println("would push: %s -> %s", ci.lpath.c_str(), ci.rpath.c_str()); |
| } else { |
| if (!sync_send(sc, ci.lpath, ci.rpath, ci.time, ci.mode, false, compression, |
| dry_run)) { |
| return false; |
| } |
| } |
| } else { |
| skipped++; |
| } |
| } |
| |
| sc.RecordFilesSkipped(skipped); |
| bool success = sc.ReadAcknowledgements(true); |
| sc.ReportTransferRate(lpath, TransferDirection::push); |
| return success; |
| } |
| |
| bool do_sync_push(const std::vector<const char*>& srcs, const char* dst, bool sync, |
| CompressionType compression, bool dry_run) { |
| SyncConnection sc; |
| if (!sc.IsValid()) return false; |
| |
| bool success = true; |
| bool dst_exists; |
| bool dst_isdir; |
| |
| struct stat st; |
| if (sync_stat_fallback(sc, dst, &st)) { |
| dst_exists = true; |
| dst_isdir = S_ISDIR(st.st_mode); |
| } else { |
| if (errno == ENOENT || errno == ENOPROTOOPT) { |
| dst_exists = false; |
| dst_isdir = false; |
| } else { |
| sc.Error("stat failed when trying to push to %s: %s", dst, strerror(errno)); |
| return false; |
| } |
| } |
| |
| if (!dst_isdir) { |
| if (srcs.size() > 1) { |
| sc.Error("target '%s' is not a directory", dst); |
| return false; |
| } else { |
| size_t dst_len = strlen(dst); |
| |
| // A path that ends with a slash doesn't have to be a directory if |
| // it doesn't exist yet. |
| if (dst[dst_len - 1] == '/' && dst_exists) { |
| sc.Error("failed to access '%s': Not a directory", dst); |
| return false; |
| } |
| } |
| } |
| |
| for (const char* src_path : srcs) { |
| const char* dst_path = dst; |
| struct stat st; |
| if (stat(src_path, &st) == -1) { |
| sc.Error("cannot stat '%s': %s", src_path, strerror(errno)); |
| success = false; |
| continue; |
| } |
| |
| if (S_ISDIR(st.st_mode)) { |
| std::string dst_dir = dst; |
| |
| // If the destination path existed originally, the source directory |
| // should be copied as a child of the destination. |
| if (dst_exists) { |
| if (!dst_isdir) { |
| sc.Error("target '%s' is not a directory", dst); |
| return false; |
| } |
| // dst is a POSIX path, so we don't want to use the sysdeps |
| // helpers here. |
| if (dst_dir.back() != '/') { |
| dst_dir.push_back('/'); |
| } |
| dst_dir.append(android::base::Basename(src_path)); |
| } |
| |
| success &= |
| copy_local_dir_remote(sc, src_path, dst_dir, sync, false, compression, dry_run); |
| continue; |
| } else if (!should_push_file(st.st_mode)) { |
| sc.Warning("skipping special file '%s' (mode = 0o%o)", src_path, st.st_mode); |
| continue; |
| } |
| |
| std::string path_holder; |
| if (dst_isdir) { |
| // If we're copying a local file to a remote directory, |
| // we really want to copy to remote_dir + "/" + local_filename. |
| path_holder = dst_path; |
| if (path_holder.back() != '/') { |
| path_holder.push_back('/'); |
| } |
| path_holder += android::base::Basename(src_path); |
| dst_path = path_holder.c_str(); |
| } |
| |
| sc.NewTransfer(); |
| sc.SetExpectedTotalBytes(st.st_size); |
| success &= sync_send(sc, src_path, dst_path, st.st_mtime, st.st_mode, sync, compression, |
| dry_run); |
| sc.ReportTransferRate(src_path, TransferDirection::push); |
| } |
| |
| success &= sc.ReadAcknowledgements(true); |
| sc.ReportOverallTransferRate(TransferDirection::push); |
| return success; |
| } |
| |
| static bool remote_build_list(SyncConnection& sc, std::vector<copyinfo>* file_list, |
| const std::string& rpath, const std::string& lpath) { |
| std::vector<copyinfo> dirlist; |
| std::vector<copyinfo> linklist; |
| |
| // Add an entry for the current directory to ensure it gets created before pulling its contents. |
| copyinfo ci(android::base::Dirname(lpath), android::base::Dirname(rpath), |
| android::base::Basename(lpath), S_IFDIR); |
| file_list->push_back(ci); |
| |
| // Put the files/dirs in rpath on the lists. |
| auto callback = [&](unsigned mode, uint64_t size, uint64_t time, const char* name) { |
| if (IsDotOrDotDot(name)) { |
| return; |
| } |
| |
| copyinfo ci(lpath, rpath, name, mode); |
| if (S_ISDIR(mode)) { |
| dirlist.push_back(ci); |
| } else if (S_ISLNK(mode)) { |
| linklist.push_back(ci); |
| } else { |
| if (!should_pull_file(ci.mode)) { |
| sc.Warning("skipping special file '%s' (mode = 0o%o)", ci.rpath.c_str(), ci.mode); |
| ci.skip = true; |
| } |
| ci.time = time; |
| ci.size = size; |
| file_list->push_back(ci); |
| } |
| }; |
| |
| if (!sync_ls(sc, rpath, callback)) { |
| return false; |
| } |
| |
| // Check each symlink we found to see whether it's a file or directory. |
| for (copyinfo& link_ci : linklist) { |
| struct stat st; |
| if (!sync_stat_fallback(sc, link_ci.rpath, &st)) { |
| sc.Warning("stat failed for path %s: %s", link_ci.rpath.c_str(), strerror(errno)); |
| continue; |
| } |
| |
| if (S_ISDIR(st.st_mode)) { |
| dirlist.emplace_back(std::move(link_ci)); |
| } else { |
| file_list->emplace_back(std::move(link_ci)); |
| } |
| } |
| |
| // Recurse into each directory we found. |
| while (!dirlist.empty()) { |
| copyinfo current = dirlist.back(); |
| dirlist.pop_back(); |
| if (!remote_build_list(sc, file_list, current.rpath, current.lpath)) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static int set_time_and_mode(const std::string& lpath, time_t time, |
| unsigned int mode) { |
| struct utimbuf times = { time, time }; |
| int r1 = utime(lpath.c_str(), ×); |
| |
| /* use umask for permissions */ |
| mode_t mask = umask(0000); |
| umask(mask); |
| int r2 = chmod(lpath.c_str(), mode & ~mask); |
| |
| return r1 ? r1 : r2; |
| } |
| |
| static bool copy_remote_dir_local(SyncConnection& sc, std::string rpath, std::string lpath, |
| bool copy_attrs, CompressionType compression) { |
| sc.NewTransfer(); |
| |
| // Make sure that both directory paths end in a slash. |
| // Both paths are known to be nonempty, so we don't need to check. |
| ensure_trailing_separators(lpath, rpath); |
| |
| // Recursively build the list of files to copy. |
| sc.Printf("pull: building file list..."); |
| std::vector<copyinfo> file_list; |
| if (!remote_build_list(sc, &file_list, rpath, lpath)) { |
| return false; |
| } |
| |
| sc.ComputeExpectedTotalBytes(file_list); |
| |
| int skipped = 0; |
| for (const copyinfo &ci : file_list) { |
| if (!ci.skip) { |
| if (S_ISDIR(ci.mode)) { |
| // Entry is for an empty directory, create it and continue. |
| // TODO(b/25457350): We don't preserve permissions on directories. |
| if (!mkdirs(ci.lpath)) { |
| sc.Error("failed to create directory '%s': %s", |
| ci.lpath.c_str(), strerror(errno)); |
| return false; |
| } |
| continue; |
| } |
| |
| if (!sync_recv(sc, ci.rpath.c_str(), ci.lpath.c_str(), nullptr, ci.size, compression)) { |
| return false; |
| } |
| |
| if (copy_attrs && set_time_and_mode(ci.lpath, ci.time, ci.mode)) { |
| return false; |
| } |
| } else { |
| skipped++; |
| } |
| } |
| |
| sc.RecordFilesSkipped(skipped); |
| sc.ReportTransferRate(rpath, TransferDirection::pull); |
| return true; |
| } |
| |
| bool do_sync_pull(const std::vector<const char*>& srcs, const char* dst, bool copy_attrs, |
| CompressionType compression, const char* name) { |
| SyncConnection sc; |
| if (!sc.IsValid()) return false; |
| |
| bool success = true; |
| struct stat st; |
| bool dst_exists = true; |
| |
| if (stat(dst, &st) == -1) { |
| dst_exists = false; |
| |
| // If we're only pulling one path, the destination path might point to |
| // a path that doesn't exist yet. |
| if (srcs.size() == 1 && errno == ENOENT) { |
| // However, its parent must exist. |
| struct stat parent_st; |
| if (stat(android::base::Dirname(dst).c_str(), &parent_st) == -1) { |
| sc.Error("cannot create file/directory '%s': %s", dst, strerror(errno)); |
| return false; |
| } |
| } else { |
| sc.Error("failed to access '%s': %s", dst, strerror(errno)); |
| return false; |
| } |
| } |
| |
| bool dst_isdir = dst_exists && S_ISDIR(st.st_mode); |
| if (!dst_isdir) { |
| if (srcs.size() > 1) { |
| sc.Error("target '%s' is not a directory", dst); |
| return false; |
| } else { |
| size_t dst_len = strlen(dst); |
| |
| // A path that ends with a slash doesn't have to be a directory if |
| // it doesn't exist yet. |
| if (adb_is_separator(dst[dst_len - 1]) && dst_exists) { |
| sc.Error("failed to access '%s': Not a directory", dst); |
| return false; |
| } |
| } |
| } |
| |
| for (const char* src_path : srcs) { |
| const char* dst_path = dst; |
| struct stat src_st; |
| if (!sync_stat_fallback(sc, src_path, &src_st)) { |
| if (errno == ENOPROTOOPT) { |
| sc.Error("remote object '%s' does not exist", src_path); |
| } else { |
| sc.Error("failed to stat remote object '%s': %s", src_path, strerror(errno)); |
| } |
| |
| success = false; |
| continue; |
| } |
| |
| bool src_isdir = S_ISDIR(src_st.st_mode); |
| if (src_isdir) { |
| std::string dst_dir = dst; |
| |
| // If the destination path existed originally, the source directory |
| // should be copied as a child of the destination. |
| if (dst_exists) { |
| if (!dst_isdir) { |
| sc.Error("target '%s' is not a directory", dst); |
| return false; |
| } |
| if (!adb_is_separator(dst_dir.back())) { |
| dst_dir.push_back(OS_PATH_SEPARATOR); |
| } |
| dst_dir.append(android::base::Basename(src_path)); |
| } |
| |
| success &= copy_remote_dir_local(sc, src_path, dst_dir, copy_attrs, compression); |
| continue; |
| } else if (!should_pull_file(src_st.st_mode)) { |
| sc.Warning("skipping special file '%s' (mode = 0o%o)", src_path, src_st.st_mode); |
| continue; |
| } |
| |
| std::string path_holder; |
| if (dst_isdir) { |
| // If we're copying a remote file to a local directory, we |
| // really want to copy to local_dir + OS_PATH_SEPARATOR + |
| // basename(remote). |
| path_holder = android::base::StringPrintf("%s%c%s", dst_path, OS_PATH_SEPARATOR, |
| android::base::Basename(src_path).c_str()); |
| dst_path = path_holder.c_str(); |
| } |
| |
| sc.NewTransfer(); |
| sc.SetExpectedTotalBytes(src_st.st_size); |
| if (!sync_recv(sc, src_path, dst_path, name, src_st.st_size, compression)) { |
| success = false; |
| continue; |
| } |
| |
| if (copy_attrs && set_time_and_mode(dst_path, src_st.st_mtime, src_st.st_mode) != 0) { |
| success = false; |
| continue; |
| } |
| sc.ReportTransferRate(src_path, TransferDirection::pull); |
| } |
| |
| sc.ReportOverallTransferRate(TransferDirection::pull); |
| return success; |
| } |
| |
| bool do_sync_sync(const std::string& lpath, const std::string& rpath, bool list_only, |
| CompressionType compression, bool dry_run) { |
| SyncConnection sc; |
| if (!sc.IsValid()) return false; |
| |
| bool success = copy_local_dir_remote(sc, lpath, rpath, true, list_only, compression, dry_run); |
| if (!list_only) { |
| sc.ReportOverallTransferRate(TransferDirection::push); |
| } |
| return success; |
| } |