Tony Lindgren | 4e65331 | 2011-11-10 22:45:17 +0100 | [diff] [blame^] | 1 | /* |
| 2 | * Header for code common to all OMAP2+ machines. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify it |
| 5 | * under the terms of the GNU General Public License as published by the |
| 6 | * Free Software Foundation; either version 2 of the License, or (at your |
| 7 | * option) any later version. |
| 8 | * |
| 9 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 10 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 11 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 12 | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 13 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 14 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 15 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 16 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 17 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 18 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License along |
| 21 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 22 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 23 | */ |
| 24 | |
| 25 | #ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H |
| 26 | #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H |
| 27 | |
| 28 | #include <linux/delay.h> |
| 29 | #include <plat/common.h> |
| 30 | |
| 31 | #ifdef CONFIG_SOC_OMAP2420 |
| 32 | extern void omap242x_map_common_io(void); |
| 33 | #else |
| 34 | static inline void omap242x_map_common_io(void) |
| 35 | { |
| 36 | } |
| 37 | #endif |
| 38 | |
| 39 | #ifdef CONFIG_SOC_OMAP2430 |
| 40 | extern void omap243x_map_common_io(void); |
| 41 | #else |
| 42 | static inline void omap243x_map_common_io(void) |
| 43 | { |
| 44 | } |
| 45 | #endif |
| 46 | |
| 47 | #ifdef CONFIG_ARCH_OMAP3 |
| 48 | extern void omap34xx_map_common_io(void); |
| 49 | #else |
| 50 | static inline void omap34xx_map_common_io(void) |
| 51 | { |
| 52 | } |
| 53 | #endif |
| 54 | |
| 55 | #ifdef CONFIG_SOC_OMAPTI816X |
| 56 | extern void omapti816x_map_common_io(void); |
| 57 | #else |
| 58 | static inline void omapti816x_map_common_io(void) |
| 59 | { |
| 60 | } |
| 61 | #endif |
| 62 | |
| 63 | #ifdef CONFIG_ARCH_OMAP4 |
| 64 | extern void omap44xx_map_common_io(void); |
| 65 | #else |
| 66 | static inline void omap44xx_map_common_io(void) |
| 67 | { |
| 68 | } |
| 69 | #endif |
| 70 | |
| 71 | extern void omap2_init_common_infrastructure(void); |
| 72 | |
| 73 | extern struct sys_timer omap2_timer; |
| 74 | extern struct sys_timer omap3_timer; |
| 75 | extern struct sys_timer omap3_secure_timer; |
| 76 | extern struct sys_timer omap4_timer; |
| 77 | |
| 78 | void omap2420_init_early(void); |
| 79 | void omap2430_init_early(void); |
| 80 | void omap3430_init_early(void); |
| 81 | void omap35xx_init_early(void); |
| 82 | void omap3630_init_early(void); |
| 83 | void omap3_init_early(void); /* Do not use this one */ |
| 84 | void am35xx_init_early(void); |
| 85 | void ti816x_init_early(void); |
| 86 | void omap4430_init_early(void); |
| 87 | |
| 88 | /* |
| 89 | * IO bases for various OMAP processors |
| 90 | * Except the tap base, rest all the io bases |
| 91 | * listed are physical addresses. |
| 92 | */ |
| 93 | struct omap_globals { |
| 94 | u32 class; /* OMAP class to detect */ |
| 95 | void __iomem *tap; /* Control module ID code */ |
| 96 | void __iomem *sdrc; /* SDRAM Controller */ |
| 97 | void __iomem *sms; /* SDRAM Memory Scheduler */ |
| 98 | void __iomem *ctrl; /* System Control Module */ |
| 99 | void __iomem *ctrl_pad; /* PAD Control Module */ |
| 100 | void __iomem *prm; /* Power and Reset Management */ |
| 101 | void __iomem *cm; /* Clock Management */ |
| 102 | void __iomem *cm2; |
| 103 | }; |
| 104 | |
| 105 | void omap2_set_globals_242x(void); |
| 106 | void omap2_set_globals_243x(void); |
| 107 | void omap2_set_globals_3xxx(void); |
| 108 | void omap2_set_globals_443x(void); |
| 109 | void omap2_set_globals_ti816x(void); |
| 110 | |
| 111 | /* These get called from omap2_set_globals_xxxx(), do not call these */ |
| 112 | void omap2_set_globals_tap(struct omap_globals *); |
| 113 | void omap2_set_globals_sdrc(struct omap_globals *); |
| 114 | void omap2_set_globals_control(struct omap_globals *); |
| 115 | void omap2_set_globals_prcm(struct omap_globals *); |
| 116 | |
| 117 | void omap242x_map_io(void); |
| 118 | void omap243x_map_io(void); |
| 119 | void omap3_map_io(void); |
| 120 | void omap4_map_io(void); |
| 121 | |
| 122 | /** |
| 123 | * omap_test_timeout - busy-loop, testing a condition |
| 124 | * @cond: condition to test until it evaluates to true |
| 125 | * @timeout: maximum number of microseconds in the timeout |
| 126 | * @index: loop index (integer) |
| 127 | * |
| 128 | * Loop waiting for @cond to become true or until at least @timeout |
| 129 | * microseconds have passed. To use, define some integer @index in the |
| 130 | * calling code. After running, if @index == @timeout, then the loop has |
| 131 | * timed out. |
| 132 | */ |
| 133 | #define omap_test_timeout(cond, timeout, index) \ |
| 134 | ({ \ |
| 135 | for (index = 0; index < timeout; index++) { \ |
| 136 | if (cond) \ |
| 137 | break; \ |
| 138 | udelay(1); \ |
| 139 | } \ |
| 140 | }) |
| 141 | |
| 142 | extern struct device *omap2_get_mpuss_device(void); |
| 143 | extern struct device *omap2_get_iva_device(void); |
| 144 | extern struct device *omap2_get_l3_device(void); |
| 145 | extern struct device *omap4_get_dsp_device(void); |
| 146 | |
| 147 | void omap2_init_irq(void); |
| 148 | void omap3_init_irq(void); |
| 149 | void ti816x_init_irq(void); |
| 150 | extern int omap_irq_pending(void); |
| 151 | void omap_intc_save_context(void); |
| 152 | void omap_intc_restore_context(void); |
| 153 | void omap3_intc_suspend(void); |
| 154 | void omap3_intc_prepare_idle(void); |
| 155 | void omap3_intc_resume_idle(void); |
| 156 | |
| 157 | /* |
| 158 | * wfi used in low power code. Directly opcode is used instead |
| 159 | * of instruction to avoid mulit-omap build break |
| 160 | */ |
| 161 | #ifdef CONFIG_THUMB2_KERNEL |
| 162 | #define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory") |
| 163 | #else |
| 164 | #define do_wfi() \ |
| 165 | __asm__ __volatile__ (".word 0xe320f003" : : : "memory") |
| 166 | #endif |
| 167 | |
| 168 | #ifdef CONFIG_CACHE_L2X0 |
| 169 | extern void __iomem *l2cache_base; |
| 170 | #endif |
| 171 | |
| 172 | extern void __iomem *gic_dist_base_addr; |
| 173 | |
| 174 | extern void __init gic_init_irq(void); |
| 175 | extern void omap_smc1(u32 fn, u32 arg); |
| 176 | |
| 177 | #ifdef CONFIG_SMP |
| 178 | /* Needed for secondary core boot */ |
| 179 | extern void omap_secondary_startup(void); |
| 180 | extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); |
| 181 | extern void omap_auxcoreboot_addr(u32 cpu_addr); |
| 182 | extern u32 omap_read_auxcoreboot0(void); |
| 183 | #endif |
| 184 | |
| 185 | #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ |