Imre Deak | 7a055fc | 2007-07-17 04:05:57 -0700 | [diff] [blame] | 1 | /* |
| 2 | * OMAP2 display controller support |
| 3 | * |
| 4 | * Copyright (C) 2005 Nokia Corporation |
| 5 | * Author: Imre Deak <imre.deak@nokia.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License as published by the |
| 9 | * Free Software Foundation; either version 2 of the License, or (at your |
| 10 | * option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License along |
| 18 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 19 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 20 | */ |
| 21 | #include <linux/kernel.h> |
| 22 | #include <linux/dma-mapping.h> |
Andrea Righi | 27ac792 | 2008-07-23 21:28:13 -0700 | [diff] [blame^] | 23 | #include <linux/mm.h> |
Imre Deak | 7a055fc | 2007-07-17 04:05:57 -0700 | [diff] [blame] | 24 | #include <linux/vmalloc.h> |
| 25 | #include <linux/clk.h> |
| 26 | #include <linux/io.h> |
| 27 | |
| 28 | #include <asm/arch/sram.h> |
| 29 | #include <asm/arch/omapfb.h> |
| 30 | #include <asm/arch/board.h> |
| 31 | |
| 32 | #include "dispc.h" |
| 33 | |
| 34 | #define MODULE_NAME "dispc" |
| 35 | |
| 36 | #define DSS_BASE 0x48050000 |
| 37 | #define DSS_SYSCONFIG 0x0010 |
| 38 | |
| 39 | #define DISPC_BASE 0x48050400 |
| 40 | |
| 41 | /* DISPC common */ |
| 42 | #define DISPC_REVISION 0x0000 |
| 43 | #define DISPC_SYSCONFIG 0x0010 |
| 44 | #define DISPC_SYSSTATUS 0x0014 |
| 45 | #define DISPC_IRQSTATUS 0x0018 |
| 46 | #define DISPC_IRQENABLE 0x001C |
| 47 | #define DISPC_CONTROL 0x0040 |
| 48 | #define DISPC_CONFIG 0x0044 |
| 49 | #define DISPC_CAPABLE 0x0048 |
| 50 | #define DISPC_DEFAULT_COLOR0 0x004C |
| 51 | #define DISPC_DEFAULT_COLOR1 0x0050 |
| 52 | #define DISPC_TRANS_COLOR0 0x0054 |
| 53 | #define DISPC_TRANS_COLOR1 0x0058 |
| 54 | #define DISPC_LINE_STATUS 0x005C |
| 55 | #define DISPC_LINE_NUMBER 0x0060 |
| 56 | #define DISPC_TIMING_H 0x0064 |
| 57 | #define DISPC_TIMING_V 0x0068 |
| 58 | #define DISPC_POL_FREQ 0x006C |
| 59 | #define DISPC_DIVISOR 0x0070 |
| 60 | #define DISPC_SIZE_DIG 0x0078 |
| 61 | #define DISPC_SIZE_LCD 0x007C |
| 62 | |
| 63 | #define DISPC_DATA_CYCLE1 0x01D4 |
| 64 | #define DISPC_DATA_CYCLE2 0x01D8 |
| 65 | #define DISPC_DATA_CYCLE3 0x01DC |
| 66 | |
| 67 | /* DISPC GFX plane */ |
| 68 | #define DISPC_GFX_BA0 0x0080 |
| 69 | #define DISPC_GFX_BA1 0x0084 |
| 70 | #define DISPC_GFX_POSITION 0x0088 |
| 71 | #define DISPC_GFX_SIZE 0x008C |
| 72 | #define DISPC_GFX_ATTRIBUTES 0x00A0 |
| 73 | #define DISPC_GFX_FIFO_THRESHOLD 0x00A4 |
| 74 | #define DISPC_GFX_FIFO_SIZE_STATUS 0x00A8 |
| 75 | #define DISPC_GFX_ROW_INC 0x00AC |
| 76 | #define DISPC_GFX_PIXEL_INC 0x00B0 |
| 77 | #define DISPC_GFX_WINDOW_SKIP 0x00B4 |
| 78 | #define DISPC_GFX_TABLE_BA 0x00B8 |
| 79 | |
| 80 | /* DISPC Video plane 1/2 */ |
| 81 | #define DISPC_VID1_BASE 0x00BC |
| 82 | #define DISPC_VID2_BASE 0x014C |
| 83 | |
| 84 | /* Offsets into DISPC_VID1/2_BASE */ |
| 85 | #define DISPC_VID_BA0 0x0000 |
| 86 | #define DISPC_VID_BA1 0x0004 |
| 87 | #define DISPC_VID_POSITION 0x0008 |
| 88 | #define DISPC_VID_SIZE 0x000C |
| 89 | #define DISPC_VID_ATTRIBUTES 0x0010 |
| 90 | #define DISPC_VID_FIFO_THRESHOLD 0x0014 |
| 91 | #define DISPC_VID_FIFO_SIZE_STATUS 0x0018 |
| 92 | #define DISPC_VID_ROW_INC 0x001C |
| 93 | #define DISPC_VID_PIXEL_INC 0x0020 |
| 94 | #define DISPC_VID_FIR 0x0024 |
| 95 | #define DISPC_VID_PICTURE_SIZE 0x0028 |
| 96 | #define DISPC_VID_ACCU0 0x002C |
| 97 | #define DISPC_VID_ACCU1 0x0030 |
| 98 | |
| 99 | /* 8 elements in 8 byte increments */ |
| 100 | #define DISPC_VID_FIR_COEF_H0 0x0034 |
| 101 | /* 8 elements in 8 byte increments */ |
| 102 | #define DISPC_VID_FIR_COEF_HV0 0x0038 |
| 103 | /* 5 elements in 4 byte increments */ |
| 104 | #define DISPC_VID_CONV_COEF0 0x0074 |
| 105 | |
| 106 | #define DISPC_IRQ_FRAMEMASK 0x0001 |
| 107 | #define DISPC_IRQ_VSYNC 0x0002 |
| 108 | #define DISPC_IRQ_EVSYNC_EVEN 0x0004 |
| 109 | #define DISPC_IRQ_EVSYNC_ODD 0x0008 |
| 110 | #define DISPC_IRQ_ACBIAS_COUNT_STAT 0x0010 |
| 111 | #define DISPC_IRQ_PROG_LINE_NUM 0x0020 |
| 112 | #define DISPC_IRQ_GFX_FIFO_UNDERFLOW 0x0040 |
| 113 | #define DISPC_IRQ_GFX_END_WIN 0x0080 |
| 114 | #define DISPC_IRQ_PAL_GAMMA_MASK 0x0100 |
| 115 | #define DISPC_IRQ_OCP_ERR 0x0200 |
| 116 | #define DISPC_IRQ_VID1_FIFO_UNDERFLOW 0x0400 |
| 117 | #define DISPC_IRQ_VID1_END_WIN 0x0800 |
| 118 | #define DISPC_IRQ_VID2_FIFO_UNDERFLOW 0x1000 |
| 119 | #define DISPC_IRQ_VID2_END_WIN 0x2000 |
| 120 | #define DISPC_IRQ_SYNC_LOST 0x4000 |
| 121 | |
| 122 | #define DISPC_IRQ_MASK_ALL 0x7fff |
| 123 | |
| 124 | #define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ |
| 125 | DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ |
| 126 | DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ |
| 127 | DISPC_IRQ_SYNC_LOST) |
| 128 | |
| 129 | #define RFBI_CONTROL 0x48050040 |
| 130 | |
| 131 | #define MAX_PALETTE_SIZE (256 * 16) |
| 132 | |
| 133 | #define FLD_MASK(pos, len) (((1 << len) - 1) << pos) |
| 134 | |
| 135 | #define MOD_REG_FLD(reg, mask, val) \ |
| 136 | dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val)); |
| 137 | |
| 138 | #define OMAP2_SRAM_START 0x40200000 |
| 139 | /* Maximum size, in reality this is smaller if SRAM is partially locked. */ |
| 140 | #define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ |
| 141 | |
| 142 | /* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */ |
| 143 | #define DISPC_MEMTYPE_NUM 2 |
| 144 | |
| 145 | #define RESMAP_SIZE(_page_cnt) \ |
| 146 | ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8) |
| 147 | #define RESMAP_PTR(_res_map, _page_nr) \ |
| 148 | (((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8)) |
| 149 | #define RESMAP_MASK(_page_nr) \ |
| 150 | (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1))) |
| 151 | |
| 152 | struct resmap { |
| 153 | unsigned long start; |
| 154 | unsigned page_cnt; |
| 155 | unsigned long *map; |
| 156 | }; |
| 157 | |
| 158 | static struct { |
| 159 | u32 base; |
| 160 | |
| 161 | struct omapfb_mem_desc mem_desc; |
| 162 | struct resmap *res_map[DISPC_MEMTYPE_NUM]; |
| 163 | atomic_t map_count[OMAPFB_PLANE_NUM]; |
| 164 | |
| 165 | dma_addr_t palette_paddr; |
| 166 | void *palette_vaddr; |
| 167 | |
| 168 | int ext_mode; |
| 169 | |
| 170 | unsigned long enabled_irqs; |
| 171 | void (*irq_callback)(void *); |
| 172 | void *irq_callback_data; |
| 173 | struct completion frame_done; |
| 174 | |
| 175 | int fir_hinc[OMAPFB_PLANE_NUM]; |
| 176 | int fir_vinc[OMAPFB_PLANE_NUM]; |
| 177 | |
| 178 | struct clk *dss_ick, *dss1_fck; |
| 179 | struct clk *dss_54m_fck; |
| 180 | |
| 181 | enum omapfb_update_mode update_mode; |
| 182 | struct omapfb_device *fbdev; |
| 183 | |
| 184 | struct omapfb_color_key color_key; |
| 185 | } dispc; |
| 186 | |
| 187 | static void enable_lcd_clocks(int enable); |
| 188 | |
| 189 | static void inline dispc_write_reg(int idx, u32 val) |
| 190 | { |
| 191 | __raw_writel(val, dispc.base + idx); |
| 192 | } |
| 193 | |
| 194 | static u32 inline dispc_read_reg(int idx) |
| 195 | { |
| 196 | u32 l = __raw_readl(dispc.base + idx); |
| 197 | return l; |
| 198 | } |
| 199 | |
| 200 | /* Select RFBI or bypass mode */ |
| 201 | static void enable_rfbi_mode(int enable) |
| 202 | { |
| 203 | u32 l; |
| 204 | |
| 205 | l = dispc_read_reg(DISPC_CONTROL); |
| 206 | /* Enable RFBI, GPIO0/1 */ |
| 207 | l &= ~((1 << 11) | (1 << 15) | (1 << 16)); |
| 208 | l |= enable ? (1 << 11) : 0; |
| 209 | /* RFBI En: GPIO0/1=10 RFBI Dis: GPIO0/1=11 */ |
| 210 | l |= 1 << 15; |
| 211 | l |= enable ? 0 : (1 << 16); |
| 212 | dispc_write_reg(DISPC_CONTROL, l); |
| 213 | |
| 214 | /* Set bypass mode in RFBI module */ |
| 215 | l = __raw_readl(io_p2v(RFBI_CONTROL)); |
| 216 | l |= enable ? 0 : (1 << 1); |
| 217 | __raw_writel(l, io_p2v(RFBI_CONTROL)); |
| 218 | } |
| 219 | |
| 220 | static void set_lcd_data_lines(int data_lines) |
| 221 | { |
| 222 | u32 l; |
| 223 | int code = 0; |
| 224 | |
| 225 | switch (data_lines) { |
| 226 | case 12: |
| 227 | code = 0; |
| 228 | break; |
| 229 | case 16: |
| 230 | code = 1; |
| 231 | break; |
| 232 | case 18: |
| 233 | code = 2; |
| 234 | break; |
| 235 | case 24: |
| 236 | code = 3; |
| 237 | break; |
| 238 | default: |
| 239 | BUG(); |
| 240 | } |
| 241 | |
| 242 | l = dispc_read_reg(DISPC_CONTROL); |
| 243 | l &= ~(0x03 << 8); |
| 244 | l |= code << 8; |
| 245 | dispc_write_reg(DISPC_CONTROL, l); |
| 246 | } |
| 247 | |
| 248 | static void set_load_mode(int mode) |
| 249 | { |
| 250 | BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY | |
| 251 | DISPC_LOAD_CLUT_ONCE_FRAME)); |
| 252 | MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1); |
| 253 | } |
| 254 | |
| 255 | void omap_dispc_set_lcd_size(int x, int y) |
| 256 | { |
| 257 | BUG_ON((x > (1 << 11)) || (y > (1 << 11))); |
| 258 | enable_lcd_clocks(1); |
| 259 | MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| 260 | ((y - 1) << 16) | (x - 1)); |
| 261 | enable_lcd_clocks(0); |
| 262 | } |
| 263 | EXPORT_SYMBOL(omap_dispc_set_lcd_size); |
| 264 | |
| 265 | void omap_dispc_set_digit_size(int x, int y) |
| 266 | { |
| 267 | BUG_ON((x > (1 << 11)) || (y > (1 << 11))); |
| 268 | enable_lcd_clocks(1); |
| 269 | MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| 270 | ((y - 1) << 16) | (x - 1)); |
| 271 | enable_lcd_clocks(0); |
| 272 | } |
| 273 | EXPORT_SYMBOL(omap_dispc_set_digit_size); |
| 274 | |
| 275 | static void setup_plane_fifo(int plane, int ext_mode) |
| 276 | { |
| 277 | const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, |
| 278 | DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD, |
| 279 | DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD }; |
| 280 | const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, |
| 281 | DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS, |
| 282 | DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS }; |
| 283 | int low, high; |
| 284 | u32 l; |
| 285 | |
| 286 | BUG_ON(plane > 2); |
| 287 | |
| 288 | l = dispc_read_reg(fsz_reg[plane]); |
| 289 | l &= FLD_MASK(0, 9); |
| 290 | if (ext_mode) { |
| 291 | low = l * 3 / 4; |
| 292 | high = l; |
| 293 | } else { |
| 294 | low = l / 4; |
| 295 | high = l * 3 / 4; |
| 296 | } |
| 297 | MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 9) | FLD_MASK(0, 9), |
| 298 | (high << 16) | low); |
| 299 | } |
| 300 | |
| 301 | void omap_dispc_enable_lcd_out(int enable) |
| 302 | { |
| 303 | enable_lcd_clocks(1); |
| 304 | MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0); |
| 305 | enable_lcd_clocks(0); |
| 306 | } |
| 307 | EXPORT_SYMBOL(omap_dispc_enable_lcd_out); |
| 308 | |
| 309 | void omap_dispc_enable_digit_out(int enable) |
| 310 | { |
| 311 | enable_lcd_clocks(1); |
| 312 | MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0); |
| 313 | enable_lcd_clocks(0); |
| 314 | } |
| 315 | EXPORT_SYMBOL(omap_dispc_enable_digit_out); |
| 316 | |
| 317 | static inline int _setup_plane(int plane, int channel_out, |
| 318 | u32 paddr, int screen_width, |
| 319 | int pos_x, int pos_y, int width, int height, |
| 320 | int color_mode) |
| 321 | { |
| 322 | const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES, |
| 323 | DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES, |
| 324 | DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES }; |
| 325 | const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0, |
| 326 | DISPC_VID2_BASE + DISPC_VID_BA0 }; |
| 327 | const u32 ps_reg[] = { DISPC_GFX_POSITION, |
| 328 | DISPC_VID1_BASE + DISPC_VID_POSITION, |
| 329 | DISPC_VID2_BASE + DISPC_VID_POSITION }; |
| 330 | const u32 sz_reg[] = { DISPC_GFX_SIZE, |
| 331 | DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE, |
| 332 | DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE }; |
| 333 | const u32 ri_reg[] = { DISPC_GFX_ROW_INC, |
| 334 | DISPC_VID1_BASE + DISPC_VID_ROW_INC, |
| 335 | DISPC_VID2_BASE + DISPC_VID_ROW_INC }; |
| 336 | const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE, |
| 337 | DISPC_VID2_BASE + DISPC_VID_SIZE }; |
| 338 | |
| 339 | int chout_shift, burst_shift; |
| 340 | int chout_val; |
| 341 | int color_code; |
| 342 | int bpp; |
| 343 | int cconv_en; |
| 344 | int set_vsize; |
| 345 | u32 l; |
| 346 | |
| 347 | #ifdef VERBOSE |
| 348 | dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d" |
| 349 | " pos_x %d pos_y %d width %d height %d color_mode %d\n", |
| 350 | plane, channel_out, paddr, screen_width, pos_x, pos_y, |
| 351 | width, height, color_mode); |
| 352 | #endif |
| 353 | |
| 354 | set_vsize = 0; |
| 355 | switch (plane) { |
| 356 | case OMAPFB_PLANE_GFX: |
| 357 | burst_shift = 6; |
| 358 | chout_shift = 8; |
| 359 | break; |
| 360 | case OMAPFB_PLANE_VID1: |
| 361 | case OMAPFB_PLANE_VID2: |
| 362 | burst_shift = 14; |
| 363 | chout_shift = 16; |
| 364 | set_vsize = 1; |
| 365 | break; |
| 366 | default: |
| 367 | return -EINVAL; |
| 368 | } |
| 369 | |
| 370 | switch (channel_out) { |
| 371 | case OMAPFB_CHANNEL_OUT_LCD: |
| 372 | chout_val = 0; |
| 373 | break; |
| 374 | case OMAPFB_CHANNEL_OUT_DIGIT: |
| 375 | chout_val = 1; |
| 376 | break; |
| 377 | default: |
| 378 | return -EINVAL; |
| 379 | } |
| 380 | |
| 381 | cconv_en = 0; |
| 382 | switch (color_mode) { |
| 383 | case OMAPFB_COLOR_RGB565: |
| 384 | color_code = DISPC_RGB_16_BPP; |
| 385 | bpp = 16; |
| 386 | break; |
| 387 | case OMAPFB_COLOR_YUV422: |
| 388 | if (plane == 0) |
| 389 | return -EINVAL; |
| 390 | color_code = DISPC_UYVY_422; |
| 391 | cconv_en = 1; |
| 392 | bpp = 16; |
| 393 | break; |
| 394 | case OMAPFB_COLOR_YUY422: |
| 395 | if (plane == 0) |
| 396 | return -EINVAL; |
| 397 | color_code = DISPC_YUV2_422; |
| 398 | cconv_en = 1; |
| 399 | bpp = 16; |
| 400 | break; |
| 401 | default: |
| 402 | return -EINVAL; |
| 403 | } |
| 404 | |
| 405 | l = dispc_read_reg(at_reg[plane]); |
| 406 | |
| 407 | l &= ~(0x0f << 1); |
| 408 | l |= color_code << 1; |
| 409 | l &= ~(1 << 9); |
| 410 | l |= cconv_en << 9; |
| 411 | |
| 412 | l &= ~(0x03 << burst_shift); |
| 413 | l |= DISPC_BURST_8x32 << burst_shift; |
| 414 | |
| 415 | l &= ~(1 << chout_shift); |
| 416 | l |= chout_val << chout_shift; |
| 417 | |
| 418 | dispc_write_reg(at_reg[plane], l); |
| 419 | |
| 420 | dispc_write_reg(ba_reg[plane], paddr); |
| 421 | MOD_REG_FLD(ps_reg[plane], |
| 422 | FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x); |
| 423 | |
| 424 | MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| 425 | ((height - 1) << 16) | (width - 1)); |
| 426 | |
| 427 | if (set_vsize) { |
| 428 | /* Set video size if set_scale hasn't set it */ |
| 429 | if (!dispc.fir_vinc[plane]) |
| 430 | MOD_REG_FLD(vs_reg[plane], |
| 431 | FLD_MASK(16, 11), (height - 1) << 16); |
| 432 | if (!dispc.fir_hinc[plane]) |
| 433 | MOD_REG_FLD(vs_reg[plane], |
| 434 | FLD_MASK(0, 11), width - 1); |
| 435 | } |
| 436 | |
| 437 | dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1); |
| 438 | |
| 439 | return height * screen_width * bpp / 8; |
| 440 | } |
| 441 | |
| 442 | static int omap_dispc_setup_plane(int plane, int channel_out, |
| 443 | unsigned long offset, |
| 444 | int screen_width, |
| 445 | int pos_x, int pos_y, int width, int height, |
| 446 | int color_mode) |
| 447 | { |
| 448 | u32 paddr; |
| 449 | int r; |
| 450 | |
| 451 | if ((unsigned)plane > dispc.mem_desc.region_cnt) |
| 452 | return -EINVAL; |
| 453 | paddr = dispc.mem_desc.region[plane].paddr + offset; |
| 454 | enable_lcd_clocks(1); |
| 455 | r = _setup_plane(plane, channel_out, paddr, |
| 456 | screen_width, |
| 457 | pos_x, pos_y, width, height, color_mode); |
| 458 | enable_lcd_clocks(0); |
| 459 | return r; |
| 460 | } |
| 461 | |
| 462 | static void write_firh_reg(int plane, int reg, u32 value) |
| 463 | { |
| 464 | u32 base; |
| 465 | |
| 466 | if (plane == 1) |
| 467 | base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0; |
| 468 | else |
| 469 | base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0; |
| 470 | dispc_write_reg(base + reg * 8, value); |
| 471 | } |
| 472 | |
| 473 | static void write_firhv_reg(int plane, int reg, u32 value) |
| 474 | { |
| 475 | u32 base; |
| 476 | |
| 477 | if (plane == 1) |
| 478 | base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0; |
| 479 | else |
| 480 | base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0; |
| 481 | dispc_write_reg(base + reg * 8, value); |
| 482 | } |
| 483 | |
| 484 | static void set_upsampling_coef_table(int plane) |
| 485 | { |
| 486 | const u32 coef[][2] = { |
| 487 | { 0x00800000, 0x00800000 }, |
| 488 | { 0x0D7CF800, 0x037B02FF }, |
| 489 | { 0x1E70F5FF, 0x0C6F05FE }, |
| 490 | { 0x335FF5FE, 0x205907FB }, |
| 491 | { 0xF74949F7, 0x00404000 }, |
| 492 | { 0xF55F33FB, 0x075920FE }, |
| 493 | { 0xF5701EFE, 0x056F0CFF }, |
| 494 | { 0xF87C0DFF, 0x027B0300 }, |
| 495 | }; |
| 496 | int i; |
| 497 | |
| 498 | for (i = 0; i < 8; i++) { |
| 499 | write_firh_reg(plane, i, coef[i][0]); |
| 500 | write_firhv_reg(plane, i, coef[i][1]); |
| 501 | } |
| 502 | } |
| 503 | |
| 504 | static int omap_dispc_set_scale(int plane, |
| 505 | int orig_width, int orig_height, |
| 506 | int out_width, int out_height) |
| 507 | { |
| 508 | const u32 at_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES, |
| 509 | DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES }; |
| 510 | const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE, |
| 511 | DISPC_VID2_BASE + DISPC_VID_SIZE }; |
| 512 | const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR, |
| 513 | DISPC_VID2_BASE + DISPC_VID_FIR }; |
| 514 | |
| 515 | u32 l; |
| 516 | int fir_hinc; |
| 517 | int fir_vinc; |
| 518 | |
| 519 | if ((unsigned)plane > OMAPFB_PLANE_NUM) |
| 520 | return -ENODEV; |
| 521 | |
| 522 | if (plane == OMAPFB_PLANE_GFX && |
| 523 | (out_width != orig_width || out_height != orig_height)) |
| 524 | return -EINVAL; |
| 525 | |
| 526 | enable_lcd_clocks(1); |
| 527 | if (orig_width < out_width) { |
| 528 | /* |
| 529 | * Upsampling. |
| 530 | * Currently you can only scale both dimensions in one way. |
| 531 | */ |
| 532 | if (orig_height > out_height || |
| 533 | orig_width * 8 < out_width || |
| 534 | orig_height * 8 < out_height) { |
| 535 | enable_lcd_clocks(0); |
| 536 | return -EINVAL; |
| 537 | } |
| 538 | set_upsampling_coef_table(plane); |
| 539 | } else if (orig_width > out_width) { |
| 540 | /* Downsampling not yet supported |
| 541 | */ |
| 542 | |
| 543 | enable_lcd_clocks(0); |
| 544 | return -EINVAL; |
| 545 | } |
| 546 | if (!orig_width || orig_width == out_width) |
| 547 | fir_hinc = 0; |
| 548 | else |
| 549 | fir_hinc = 1024 * orig_width / out_width; |
| 550 | if (!orig_height || orig_height == out_height) |
| 551 | fir_vinc = 0; |
| 552 | else |
| 553 | fir_vinc = 1024 * orig_height / out_height; |
| 554 | dispc.fir_hinc[plane] = fir_hinc; |
| 555 | dispc.fir_vinc[plane] = fir_vinc; |
| 556 | |
| 557 | MOD_REG_FLD(fir_reg[plane], |
| 558 | FLD_MASK(16, 12) | FLD_MASK(0, 12), |
| 559 | ((fir_vinc & 4095) << 16) | |
| 560 | (fir_hinc & 4095)); |
| 561 | |
| 562 | dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d " |
| 563 | "orig_height %d fir_hinc %d fir_vinc %d\n", |
| 564 | out_width, out_height, orig_width, orig_height, |
| 565 | fir_hinc, fir_vinc); |
| 566 | |
| 567 | MOD_REG_FLD(vs_reg[plane], |
| 568 | FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| 569 | ((out_height - 1) << 16) | (out_width - 1)); |
| 570 | |
| 571 | l = dispc_read_reg(at_reg[plane]); |
| 572 | l &= ~(0x03 << 5); |
| 573 | l |= fir_hinc ? (1 << 5) : 0; |
| 574 | l |= fir_vinc ? (1 << 6) : 0; |
| 575 | dispc_write_reg(at_reg[plane], l); |
| 576 | |
| 577 | enable_lcd_clocks(0); |
| 578 | return 0; |
| 579 | } |
| 580 | |
| 581 | static int omap_dispc_enable_plane(int plane, int enable) |
| 582 | { |
| 583 | const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES, |
| 584 | DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES, |
| 585 | DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES }; |
| 586 | if ((unsigned int)plane > dispc.mem_desc.region_cnt) |
| 587 | return -EINVAL; |
| 588 | |
| 589 | enable_lcd_clocks(1); |
| 590 | MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0); |
| 591 | enable_lcd_clocks(0); |
| 592 | |
| 593 | return 0; |
| 594 | } |
| 595 | |
| 596 | static int omap_dispc_set_color_key(struct omapfb_color_key *ck) |
| 597 | { |
| 598 | u32 df_reg, tr_reg; |
| 599 | int shift, val; |
| 600 | |
| 601 | switch (ck->channel_out) { |
| 602 | case OMAPFB_CHANNEL_OUT_LCD: |
| 603 | df_reg = DISPC_DEFAULT_COLOR0; |
| 604 | tr_reg = DISPC_TRANS_COLOR0; |
| 605 | shift = 10; |
| 606 | break; |
| 607 | case OMAPFB_CHANNEL_OUT_DIGIT: |
| 608 | df_reg = DISPC_DEFAULT_COLOR1; |
| 609 | tr_reg = DISPC_TRANS_COLOR1; |
| 610 | shift = 12; |
| 611 | break; |
| 612 | default: |
| 613 | return -EINVAL; |
| 614 | } |
| 615 | switch (ck->key_type) { |
| 616 | case OMAPFB_COLOR_KEY_DISABLED: |
| 617 | val = 0; |
| 618 | break; |
| 619 | case OMAPFB_COLOR_KEY_GFX_DST: |
| 620 | val = 1; |
| 621 | break; |
| 622 | case OMAPFB_COLOR_KEY_VID_SRC: |
| 623 | val = 3; |
| 624 | break; |
| 625 | default: |
| 626 | return -EINVAL; |
| 627 | } |
| 628 | enable_lcd_clocks(1); |
| 629 | MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift); |
| 630 | |
| 631 | if (val != 0) |
| 632 | dispc_write_reg(tr_reg, ck->trans_key); |
| 633 | dispc_write_reg(df_reg, ck->background); |
| 634 | enable_lcd_clocks(0); |
| 635 | |
| 636 | dispc.color_key = *ck; |
| 637 | |
| 638 | return 0; |
| 639 | } |
| 640 | |
| 641 | static int omap_dispc_get_color_key(struct omapfb_color_key *ck) |
| 642 | { |
| 643 | *ck = dispc.color_key; |
| 644 | return 0; |
| 645 | } |
| 646 | |
| 647 | static void load_palette(void) |
| 648 | { |
| 649 | } |
| 650 | |
| 651 | static int omap_dispc_set_update_mode(enum omapfb_update_mode mode) |
| 652 | { |
| 653 | int r = 0; |
| 654 | |
| 655 | if (mode != dispc.update_mode) { |
| 656 | switch (mode) { |
| 657 | case OMAPFB_AUTO_UPDATE: |
| 658 | case OMAPFB_MANUAL_UPDATE: |
| 659 | enable_lcd_clocks(1); |
| 660 | omap_dispc_enable_lcd_out(1); |
| 661 | dispc.update_mode = mode; |
| 662 | break; |
| 663 | case OMAPFB_UPDATE_DISABLED: |
| 664 | init_completion(&dispc.frame_done); |
| 665 | omap_dispc_enable_lcd_out(0); |
| 666 | if (!wait_for_completion_timeout(&dispc.frame_done, |
| 667 | msecs_to_jiffies(500))) { |
| 668 | dev_err(dispc.fbdev->dev, |
| 669 | "timeout waiting for FRAME DONE\n"); |
| 670 | } |
| 671 | dispc.update_mode = mode; |
| 672 | enable_lcd_clocks(0); |
| 673 | break; |
| 674 | default: |
| 675 | r = -EINVAL; |
| 676 | } |
| 677 | } |
| 678 | |
| 679 | return r; |
| 680 | } |
| 681 | |
| 682 | static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps) |
| 683 | { |
| 684 | caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM; |
| 685 | if (plane > 0) |
| 686 | caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE; |
| 687 | caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) | |
| 688 | (1 << OMAPFB_COLOR_YUV422) | |
| 689 | (1 << OMAPFB_COLOR_YUY422); |
| 690 | if (plane == 0) |
| 691 | caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) | |
| 692 | (1 << OMAPFB_COLOR_CLUT_4BPP) | |
| 693 | (1 << OMAPFB_COLOR_CLUT_2BPP) | |
| 694 | (1 << OMAPFB_COLOR_CLUT_1BPP) | |
| 695 | (1 << OMAPFB_COLOR_RGB444); |
| 696 | } |
| 697 | |
| 698 | static enum omapfb_update_mode omap_dispc_get_update_mode(void) |
| 699 | { |
| 700 | return dispc.update_mode; |
| 701 | } |
| 702 | |
| 703 | static void setup_color_conv_coef(void) |
| 704 | { |
| 705 | u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11); |
| 706 | int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0; |
| 707 | int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0; |
| 708 | int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES; |
| 709 | int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES; |
| 710 | const struct color_conv_coef { |
| 711 | int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; |
| 712 | int full_range; |
| 713 | } ctbl_bt601_5 = { |
| 714 | 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, |
| 715 | }; |
| 716 | const struct color_conv_coef *ct; |
| 717 | #define CVAL(x, y) (((x & 2047) << 16) | (y & 2047)) |
| 718 | |
| 719 | ct = &ctbl_bt601_5; |
| 720 | |
| 721 | MOD_REG_FLD(cf1_reg, mask, CVAL(ct->rcr, ct->ry)); |
| 722 | MOD_REG_FLD(cf1_reg + 4, mask, CVAL(ct->gy, ct->rcb)); |
| 723 | MOD_REG_FLD(cf1_reg + 8, mask, CVAL(ct->gcb, ct->gcr)); |
| 724 | MOD_REG_FLD(cf1_reg + 12, mask, CVAL(ct->bcr, ct->by)); |
| 725 | MOD_REG_FLD(cf1_reg + 16, mask, CVAL(0, ct->bcb)); |
| 726 | |
| 727 | MOD_REG_FLD(cf2_reg, mask, CVAL(ct->rcr, ct->ry)); |
| 728 | MOD_REG_FLD(cf2_reg + 4, mask, CVAL(ct->gy, ct->rcb)); |
| 729 | MOD_REG_FLD(cf2_reg + 8, mask, CVAL(ct->gcb, ct->gcr)); |
| 730 | MOD_REG_FLD(cf2_reg + 12, mask, CVAL(ct->bcr, ct->by)); |
| 731 | MOD_REG_FLD(cf2_reg + 16, mask, CVAL(0, ct->bcb)); |
| 732 | #undef CVAL |
| 733 | |
| 734 | MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range); |
| 735 | MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range); |
| 736 | } |
| 737 | |
| 738 | static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div) |
| 739 | { |
| 740 | unsigned long fck, lck; |
| 741 | |
| 742 | *lck_div = 1; |
| 743 | pck = max(1, pck); |
| 744 | fck = clk_get_rate(dispc.dss1_fck); |
| 745 | lck = fck; |
| 746 | *pck_div = (lck + pck - 1) / pck; |
| 747 | if (is_tft) |
| 748 | *pck_div = max(2, *pck_div); |
| 749 | else |
| 750 | *pck_div = max(3, *pck_div); |
| 751 | if (*pck_div > 255) { |
| 752 | *pck_div = 255; |
| 753 | lck = pck * *pck_div; |
| 754 | *lck_div = fck / lck; |
| 755 | BUG_ON(*lck_div < 1); |
| 756 | if (*lck_div > 255) { |
| 757 | *lck_div = 255; |
| 758 | dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n", |
| 759 | pck / 1000); |
| 760 | } |
| 761 | } |
| 762 | } |
| 763 | |
| 764 | static void set_lcd_tft_mode(int enable) |
| 765 | { |
| 766 | u32 mask; |
| 767 | |
| 768 | mask = 1 << 3; |
| 769 | MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0); |
| 770 | } |
| 771 | |
| 772 | static void set_lcd_timings(void) |
| 773 | { |
| 774 | u32 l; |
| 775 | int lck_div, pck_div; |
| 776 | struct lcd_panel *panel = dispc.fbdev->panel; |
| 777 | int is_tft = panel->config & OMAP_LCDC_PANEL_TFT; |
| 778 | unsigned long fck; |
| 779 | |
| 780 | l = dispc_read_reg(DISPC_TIMING_H); |
| 781 | l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8)); |
| 782 | l |= ( max(1, (min(64, panel->hsw))) - 1 ) << 0; |
| 783 | l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8; |
| 784 | l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20; |
| 785 | dispc_write_reg(DISPC_TIMING_H, l); |
| 786 | |
| 787 | l = dispc_read_reg(DISPC_TIMING_V); |
| 788 | l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8)); |
| 789 | l |= ( max(1, (min(64, panel->vsw))) - 1 ) << 0; |
| 790 | l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8; |
| 791 | l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20; |
| 792 | dispc_write_reg(DISPC_TIMING_V, l); |
| 793 | |
| 794 | l = dispc_read_reg(DISPC_POL_FREQ); |
| 795 | l &= ~FLD_MASK(12, 6); |
| 796 | l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12; |
| 797 | l |= panel->acb & 0xff; |
| 798 | dispc_write_reg(DISPC_POL_FREQ, l); |
| 799 | |
| 800 | calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div); |
| 801 | |
| 802 | l = dispc_read_reg(DISPC_DIVISOR); |
| 803 | l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8)); |
| 804 | l |= (lck_div << 16) | (pck_div << 0); |
| 805 | dispc_write_reg(DISPC_DIVISOR, l); |
| 806 | |
| 807 | /* update panel info with the exact clock */ |
| 808 | fck = clk_get_rate(dispc.dss1_fck); |
| 809 | panel->pixel_clock = fck / lck_div / pck_div / 1000; |
| 810 | } |
| 811 | |
| 812 | int omap_dispc_request_irq(void (*callback)(void *data), void *data) |
| 813 | { |
| 814 | int r = 0; |
| 815 | |
| 816 | BUG_ON(callback == NULL); |
| 817 | |
| 818 | if (dispc.irq_callback) |
| 819 | r = -EBUSY; |
| 820 | else { |
| 821 | dispc.irq_callback = callback; |
| 822 | dispc.irq_callback_data = data; |
| 823 | } |
| 824 | |
| 825 | return r; |
| 826 | } |
| 827 | EXPORT_SYMBOL(omap_dispc_request_irq); |
| 828 | |
| 829 | void omap_dispc_enable_irqs(int irq_mask) |
| 830 | { |
| 831 | enable_lcd_clocks(1); |
| 832 | dispc.enabled_irqs = irq_mask; |
| 833 | irq_mask |= DISPC_IRQ_MASK_ERROR; |
| 834 | MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask); |
| 835 | enable_lcd_clocks(0); |
| 836 | } |
| 837 | EXPORT_SYMBOL(omap_dispc_enable_irqs); |
| 838 | |
| 839 | void omap_dispc_disable_irqs(int irq_mask) |
| 840 | { |
| 841 | enable_lcd_clocks(1); |
| 842 | dispc.enabled_irqs &= ~irq_mask; |
| 843 | irq_mask &= ~DISPC_IRQ_MASK_ERROR; |
| 844 | MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask); |
| 845 | enable_lcd_clocks(0); |
| 846 | } |
| 847 | EXPORT_SYMBOL(omap_dispc_disable_irqs); |
| 848 | |
| 849 | void omap_dispc_free_irq(void) |
| 850 | { |
| 851 | enable_lcd_clocks(1); |
| 852 | omap_dispc_disable_irqs(DISPC_IRQ_MASK_ALL); |
| 853 | dispc.irq_callback = NULL; |
| 854 | dispc.irq_callback_data = NULL; |
| 855 | enable_lcd_clocks(0); |
| 856 | } |
| 857 | EXPORT_SYMBOL(omap_dispc_free_irq); |
| 858 | |
| 859 | static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) |
| 860 | { |
| 861 | u32 stat = dispc_read_reg(DISPC_IRQSTATUS); |
| 862 | |
| 863 | if (stat & DISPC_IRQ_FRAMEMASK) |
| 864 | complete(&dispc.frame_done); |
| 865 | |
| 866 | if (stat & DISPC_IRQ_MASK_ERROR) { |
| 867 | if (printk_ratelimit()) { |
| 868 | dev_err(dispc.fbdev->dev, "irq error status %04x\n", |
| 869 | stat & 0x7fff); |
| 870 | } |
| 871 | } |
| 872 | |
| 873 | if ((stat & dispc.enabled_irqs) && dispc.irq_callback) |
| 874 | dispc.irq_callback(dispc.irq_callback_data); |
| 875 | |
| 876 | dispc_write_reg(DISPC_IRQSTATUS, stat); |
| 877 | |
| 878 | return IRQ_HANDLED; |
| 879 | } |
| 880 | |
| 881 | static int get_dss_clocks(void) |
| 882 | { |
| 883 | if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) { |
Joe Perches | 898eb71 | 2007-10-18 03:06:30 -0700 | [diff] [blame] | 884 | dev_err(dispc.fbdev->dev, "can't get dss_ick\n"); |
Imre Deak | 7a055fc | 2007-07-17 04:05:57 -0700 | [diff] [blame] | 885 | return PTR_ERR(dispc.dss_ick); |
| 886 | } |
| 887 | |
| 888 | if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) { |
Joe Perches | 898eb71 | 2007-10-18 03:06:30 -0700 | [diff] [blame] | 889 | dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); |
Imre Deak | 7a055fc | 2007-07-17 04:05:57 -0700 | [diff] [blame] | 890 | clk_put(dispc.dss_ick); |
| 891 | return PTR_ERR(dispc.dss1_fck); |
| 892 | } |
| 893 | |
| 894 | if (IS_ERR((dispc.dss_54m_fck = |
| 895 | clk_get(dispc.fbdev->dev, "dss_54m_fck")))) { |
Joe Perches | 898eb71 | 2007-10-18 03:06:30 -0700 | [diff] [blame] | 896 | dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n"); |
Imre Deak | 7a055fc | 2007-07-17 04:05:57 -0700 | [diff] [blame] | 897 | clk_put(dispc.dss_ick); |
| 898 | clk_put(dispc.dss1_fck); |
| 899 | return PTR_ERR(dispc.dss_54m_fck); |
| 900 | } |
| 901 | |
| 902 | return 0; |
| 903 | } |
| 904 | |
| 905 | static void put_dss_clocks(void) |
| 906 | { |
| 907 | clk_put(dispc.dss_54m_fck); |
| 908 | clk_put(dispc.dss1_fck); |
| 909 | clk_put(dispc.dss_ick); |
| 910 | } |
| 911 | |
| 912 | static void enable_lcd_clocks(int enable) |
| 913 | { |
| 914 | if (enable) |
| 915 | clk_enable(dispc.dss1_fck); |
| 916 | else |
| 917 | clk_disable(dispc.dss1_fck); |
| 918 | } |
| 919 | |
| 920 | static void enable_interface_clocks(int enable) |
| 921 | { |
| 922 | if (enable) |
| 923 | clk_enable(dispc.dss_ick); |
| 924 | else |
| 925 | clk_disable(dispc.dss_ick); |
| 926 | } |
| 927 | |
| 928 | static void enable_digit_clocks(int enable) |
| 929 | { |
| 930 | if (enable) |
| 931 | clk_enable(dispc.dss_54m_fck); |
| 932 | else |
| 933 | clk_disable(dispc.dss_54m_fck); |
| 934 | } |
| 935 | |
| 936 | static void omap_dispc_suspend(void) |
| 937 | { |
| 938 | if (dispc.update_mode == OMAPFB_AUTO_UPDATE) { |
| 939 | init_completion(&dispc.frame_done); |
| 940 | omap_dispc_enable_lcd_out(0); |
| 941 | if (!wait_for_completion_timeout(&dispc.frame_done, |
| 942 | msecs_to_jiffies(500))) { |
| 943 | dev_err(dispc.fbdev->dev, |
| 944 | "timeout waiting for FRAME DONE\n"); |
| 945 | } |
| 946 | enable_lcd_clocks(0); |
| 947 | } |
| 948 | } |
| 949 | |
| 950 | static void omap_dispc_resume(void) |
| 951 | { |
| 952 | if (dispc.update_mode == OMAPFB_AUTO_UPDATE) { |
| 953 | enable_lcd_clocks(1); |
| 954 | if (!dispc.ext_mode) { |
| 955 | set_lcd_timings(); |
| 956 | load_palette(); |
| 957 | } |
| 958 | omap_dispc_enable_lcd_out(1); |
| 959 | } |
| 960 | } |
| 961 | |
| 962 | |
| 963 | static int omap_dispc_update_window(struct fb_info *fbi, |
| 964 | struct omapfb_update_window *win, |
| 965 | void (*complete_callback)(void *arg), |
| 966 | void *complete_callback_data) |
| 967 | { |
| 968 | return dispc.update_mode == OMAPFB_UPDATE_DISABLED ? -ENODEV : 0; |
| 969 | } |
| 970 | |
| 971 | static int mmap_kern(struct omapfb_mem_region *region) |
| 972 | { |
| 973 | struct vm_struct *kvma; |
| 974 | struct vm_area_struct vma; |
| 975 | pgprot_t pgprot; |
| 976 | unsigned long vaddr; |
| 977 | |
| 978 | kvma = get_vm_area(region->size, VM_IOREMAP); |
| 979 | if (kvma == NULL) { |
| 980 | dev_err(dispc.fbdev->dev, "can't get kernel vm area\n"); |
| 981 | return -ENOMEM; |
| 982 | } |
| 983 | vma.vm_mm = &init_mm; |
| 984 | |
| 985 | vaddr = (unsigned long)kvma->addr; |
| 986 | |
| 987 | pgprot = pgprot_writecombine(pgprot_kernel); |
| 988 | vma.vm_start = vaddr; |
| 989 | vma.vm_end = vaddr + region->size; |
| 990 | if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT, |
| 991 | region->size, pgprot) < 0) { |
| 992 | dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n"); |
| 993 | return -EAGAIN; |
| 994 | } |
| 995 | region->vaddr = (void *)vaddr; |
| 996 | |
| 997 | return 0; |
| 998 | } |
| 999 | |
| 1000 | static void mmap_user_open(struct vm_area_struct *vma) |
| 1001 | { |
| 1002 | int plane = (int)vma->vm_private_data; |
| 1003 | |
| 1004 | atomic_inc(&dispc.map_count[plane]); |
| 1005 | } |
| 1006 | |
| 1007 | static void mmap_user_close(struct vm_area_struct *vma) |
| 1008 | { |
| 1009 | int plane = (int)vma->vm_private_data; |
| 1010 | |
| 1011 | atomic_dec(&dispc.map_count[plane]); |
| 1012 | } |
| 1013 | |
| 1014 | static struct vm_operations_struct mmap_user_ops = { |
| 1015 | .open = mmap_user_open, |
| 1016 | .close = mmap_user_close, |
| 1017 | }; |
| 1018 | |
| 1019 | static int omap_dispc_mmap_user(struct fb_info *info, |
| 1020 | struct vm_area_struct *vma) |
| 1021 | { |
| 1022 | struct omapfb_plane_struct *plane = info->par; |
| 1023 | unsigned long off; |
| 1024 | unsigned long start; |
| 1025 | u32 len; |
| 1026 | |
| 1027 | if (vma->vm_end - vma->vm_start == 0) |
| 1028 | return 0; |
| 1029 | if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) |
| 1030 | return -EINVAL; |
| 1031 | off = vma->vm_pgoff << PAGE_SHIFT; |
| 1032 | |
| 1033 | start = info->fix.smem_start; |
| 1034 | len = info->fix.smem_len; |
| 1035 | if (off >= len) |
| 1036 | return -EINVAL; |
| 1037 | if ((vma->vm_end - vma->vm_start + off) > len) |
| 1038 | return -EINVAL; |
| 1039 | off += start; |
| 1040 | vma->vm_pgoff = off >> PAGE_SHIFT; |
| 1041 | vma->vm_flags |= VM_IO | VM_RESERVED; |
| 1042 | vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); |
| 1043 | vma->vm_ops = &mmap_user_ops; |
| 1044 | vma->vm_private_data = (void *)plane->idx; |
| 1045 | if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, |
| 1046 | vma->vm_end - vma->vm_start, vma->vm_page_prot)) |
| 1047 | return -EAGAIN; |
| 1048 | /* vm_ops.open won't be called for mmap itself. */ |
| 1049 | atomic_inc(&dispc.map_count[plane->idx]); |
| 1050 | return 0; |
| 1051 | } |
| 1052 | |
| 1053 | static void unmap_kern(struct omapfb_mem_region *region) |
| 1054 | { |
| 1055 | vunmap(region->vaddr); |
| 1056 | } |
| 1057 | |
| 1058 | static int alloc_palette_ram(void) |
| 1059 | { |
| 1060 | dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev, |
| 1061 | MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL); |
| 1062 | if (dispc.palette_vaddr == NULL) { |
| 1063 | dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n"); |
| 1064 | return -ENOMEM; |
| 1065 | } |
| 1066 | |
| 1067 | return 0; |
| 1068 | } |
| 1069 | |
| 1070 | static void free_palette_ram(void) |
| 1071 | { |
| 1072 | dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE, |
| 1073 | dispc.palette_vaddr, dispc.palette_paddr); |
| 1074 | } |
| 1075 | |
| 1076 | static int alloc_fbmem(struct omapfb_mem_region *region) |
| 1077 | { |
| 1078 | region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev, |
| 1079 | region->size, ®ion->paddr, GFP_KERNEL); |
| 1080 | |
| 1081 | if (region->vaddr == NULL) { |
| 1082 | dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n"); |
| 1083 | return -ENOMEM; |
| 1084 | } |
| 1085 | |
| 1086 | return 0; |
| 1087 | } |
| 1088 | |
| 1089 | static void free_fbmem(struct omapfb_mem_region *region) |
| 1090 | { |
| 1091 | dma_free_writecombine(dispc.fbdev->dev, region->size, |
| 1092 | region->vaddr, region->paddr); |
| 1093 | } |
| 1094 | |
| 1095 | static struct resmap *init_resmap(unsigned long start, size_t size) |
| 1096 | { |
| 1097 | unsigned page_cnt; |
| 1098 | struct resmap *res_map; |
| 1099 | |
| 1100 | page_cnt = PAGE_ALIGN(size) / PAGE_SIZE; |
| 1101 | res_map = |
| 1102 | kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL); |
| 1103 | if (res_map == NULL) |
| 1104 | return NULL; |
| 1105 | res_map->start = start; |
| 1106 | res_map->page_cnt = page_cnt; |
| 1107 | res_map->map = (unsigned long *)(res_map + 1); |
| 1108 | return res_map; |
| 1109 | } |
| 1110 | |
| 1111 | static void cleanup_resmap(struct resmap *res_map) |
| 1112 | { |
| 1113 | kfree(res_map); |
| 1114 | } |
| 1115 | |
| 1116 | static inline int resmap_mem_type(unsigned long start) |
| 1117 | { |
| 1118 | if (start >= OMAP2_SRAM_START && |
| 1119 | start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) |
| 1120 | return OMAPFB_MEMTYPE_SRAM; |
| 1121 | else |
| 1122 | return OMAPFB_MEMTYPE_SDRAM; |
| 1123 | } |
| 1124 | |
| 1125 | static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr) |
| 1126 | { |
| 1127 | return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0; |
| 1128 | } |
| 1129 | |
| 1130 | static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr) |
| 1131 | { |
| 1132 | BUG_ON(resmap_page_reserved(res_map, page_nr)); |
| 1133 | *RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr); |
| 1134 | } |
| 1135 | |
| 1136 | static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr) |
| 1137 | { |
| 1138 | BUG_ON(!resmap_page_reserved(res_map, page_nr)); |
| 1139 | *RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr); |
| 1140 | } |
| 1141 | |
| 1142 | static void resmap_reserve_region(unsigned long start, size_t size) |
| 1143 | { |
| 1144 | |
| 1145 | struct resmap *res_map; |
| 1146 | unsigned start_page; |
| 1147 | unsigned end_page; |
| 1148 | int mtype; |
| 1149 | unsigned i; |
| 1150 | |
| 1151 | mtype = resmap_mem_type(start); |
| 1152 | res_map = dispc.res_map[mtype]; |
| 1153 | dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n", |
| 1154 | mtype, start, size); |
| 1155 | start_page = (start - res_map->start) / PAGE_SIZE; |
| 1156 | end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE; |
| 1157 | for (i = start_page; i < end_page; i++) |
| 1158 | resmap_reserve_page(res_map, i); |
| 1159 | } |
| 1160 | |
| 1161 | static void resmap_free_region(unsigned long start, size_t size) |
| 1162 | { |
| 1163 | struct resmap *res_map; |
| 1164 | unsigned start_page; |
| 1165 | unsigned end_page; |
| 1166 | unsigned i; |
| 1167 | int mtype; |
| 1168 | |
| 1169 | mtype = resmap_mem_type(start); |
| 1170 | res_map = dispc.res_map[mtype]; |
| 1171 | dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n", |
| 1172 | mtype, start, size); |
| 1173 | start_page = (start - res_map->start) / PAGE_SIZE; |
| 1174 | end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE; |
| 1175 | for (i = start_page; i < end_page; i++) |
| 1176 | resmap_free_page(res_map, i); |
| 1177 | } |
| 1178 | |
| 1179 | static unsigned long resmap_alloc_region(int mtype, size_t size) |
| 1180 | { |
| 1181 | unsigned i; |
| 1182 | unsigned total; |
| 1183 | unsigned start_page; |
| 1184 | unsigned long start; |
| 1185 | struct resmap *res_map = dispc.res_map[mtype]; |
| 1186 | |
| 1187 | BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map == NULL || !size); |
| 1188 | |
| 1189 | size = PAGE_ALIGN(size) / PAGE_SIZE; |
| 1190 | start_page = 0; |
| 1191 | total = 0; |
| 1192 | for (i = 0; i < res_map->page_cnt; i++) { |
| 1193 | if (resmap_page_reserved(res_map, i)) { |
| 1194 | start_page = i + 1; |
| 1195 | total = 0; |
| 1196 | } else if (++total == size) |
| 1197 | break; |
| 1198 | } |
| 1199 | if (total < size) |
| 1200 | return 0; |
| 1201 | |
| 1202 | start = res_map->start + start_page * PAGE_SIZE; |
| 1203 | resmap_reserve_region(start, size * PAGE_SIZE); |
| 1204 | |
| 1205 | return start; |
| 1206 | } |
| 1207 | |
| 1208 | /* Note that this will only work for user mappings, we don't deal with |
| 1209 | * kernel mappings here, so fbcon will keep using the old region. |
| 1210 | */ |
| 1211 | static int omap_dispc_setup_mem(int plane, size_t size, int mem_type, |
| 1212 | unsigned long *paddr) |
| 1213 | { |
| 1214 | struct omapfb_mem_region *rg; |
| 1215 | unsigned long new_addr = 0; |
| 1216 | |
| 1217 | if ((unsigned)plane > dispc.mem_desc.region_cnt) |
| 1218 | return -EINVAL; |
| 1219 | if (mem_type >= DISPC_MEMTYPE_NUM) |
| 1220 | return -EINVAL; |
| 1221 | if (dispc.res_map[mem_type] == NULL) |
| 1222 | return -ENOMEM; |
| 1223 | rg = &dispc.mem_desc.region[plane]; |
| 1224 | if (size == rg->size && mem_type == rg->type) |
| 1225 | return 0; |
| 1226 | if (atomic_read(&dispc.map_count[plane])) |
| 1227 | return -EBUSY; |
| 1228 | if (rg->size != 0) |
| 1229 | resmap_free_region(rg->paddr, rg->size); |
| 1230 | if (size != 0) { |
| 1231 | new_addr = resmap_alloc_region(mem_type, size); |
| 1232 | if (!new_addr) { |
| 1233 | /* Reallocate old region. */ |
| 1234 | resmap_reserve_region(rg->paddr, rg->size); |
| 1235 | return -ENOMEM; |
| 1236 | } |
| 1237 | } |
| 1238 | rg->paddr = new_addr; |
| 1239 | rg->size = size; |
| 1240 | rg->type = mem_type; |
| 1241 | |
| 1242 | *paddr = new_addr; |
| 1243 | |
| 1244 | return 0; |
| 1245 | } |
| 1246 | |
| 1247 | static int setup_fbmem(struct omapfb_mem_desc *req_md) |
| 1248 | { |
| 1249 | struct omapfb_mem_region *rg; |
| 1250 | int i; |
| 1251 | int r; |
| 1252 | unsigned long mem_start[DISPC_MEMTYPE_NUM]; |
| 1253 | unsigned long mem_end[DISPC_MEMTYPE_NUM]; |
| 1254 | |
| 1255 | if (!req_md->region_cnt) { |
| 1256 | dev_err(dispc.fbdev->dev, "no memory regions defined\n"); |
| 1257 | return -ENOENT; |
| 1258 | } |
| 1259 | |
| 1260 | rg = &req_md->region[0]; |
| 1261 | memset(mem_start, 0xff, sizeof(mem_start)); |
| 1262 | memset(mem_end, 0, sizeof(mem_end)); |
| 1263 | |
| 1264 | for (i = 0; i < req_md->region_cnt; i++, rg++) { |
| 1265 | int mtype; |
| 1266 | if (rg->paddr) { |
| 1267 | rg->alloc = 0; |
| 1268 | if (rg->vaddr == NULL) { |
| 1269 | rg->map = 1; |
| 1270 | if ((r = mmap_kern(rg)) < 0) |
| 1271 | return r; |
| 1272 | } |
| 1273 | } else { |
| 1274 | if (rg->type != OMAPFB_MEMTYPE_SDRAM) { |
| 1275 | dev_err(dispc.fbdev->dev, |
| 1276 | "unsupported memory type\n"); |
| 1277 | return -EINVAL; |
| 1278 | } |
| 1279 | rg->alloc = rg->map = 1; |
| 1280 | if ((r = alloc_fbmem(rg)) < 0) |
| 1281 | return r; |
| 1282 | } |
| 1283 | mtype = rg->type; |
| 1284 | |
| 1285 | if (rg->paddr < mem_start[mtype]) |
| 1286 | mem_start[mtype] = rg->paddr; |
| 1287 | if (rg->paddr + rg->size > mem_end[mtype]) |
| 1288 | mem_end[mtype] = rg->paddr + rg->size; |
| 1289 | } |
| 1290 | |
| 1291 | for (i = 0; i < DISPC_MEMTYPE_NUM; i++) { |
| 1292 | unsigned long start; |
| 1293 | size_t size; |
| 1294 | if (mem_end[i] == 0) |
| 1295 | continue; |
| 1296 | start = mem_start[i]; |
| 1297 | size = mem_end[i] - start; |
| 1298 | dispc.res_map[i] = init_resmap(start, size); |
| 1299 | r = -ENOMEM; |
| 1300 | if (dispc.res_map[i] == NULL) |
| 1301 | goto fail; |
| 1302 | /* Initial state is that everything is reserved. This |
| 1303 | * includes possible holes as well, which will never be |
| 1304 | * freed. |
| 1305 | */ |
| 1306 | resmap_reserve_region(start, size); |
| 1307 | } |
| 1308 | |
| 1309 | dispc.mem_desc = *req_md; |
| 1310 | |
| 1311 | return 0; |
| 1312 | fail: |
| 1313 | for (i = 0; i < DISPC_MEMTYPE_NUM; i++) { |
| 1314 | if (dispc.res_map[i] != NULL) |
| 1315 | cleanup_resmap(dispc.res_map[i]); |
| 1316 | } |
| 1317 | return r; |
| 1318 | } |
| 1319 | |
| 1320 | static void cleanup_fbmem(void) |
| 1321 | { |
| 1322 | struct omapfb_mem_region *rg; |
| 1323 | int i; |
| 1324 | |
| 1325 | for (i = 0; i < DISPC_MEMTYPE_NUM; i++) { |
| 1326 | if (dispc.res_map[i] != NULL) |
| 1327 | cleanup_resmap(dispc.res_map[i]); |
| 1328 | } |
| 1329 | rg = &dispc.mem_desc.region[0]; |
| 1330 | for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) { |
| 1331 | if (rg->alloc) |
| 1332 | free_fbmem(rg); |
| 1333 | else { |
| 1334 | if (rg->map) |
| 1335 | unmap_kern(rg); |
| 1336 | } |
| 1337 | } |
| 1338 | } |
| 1339 | |
| 1340 | static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, |
| 1341 | struct omapfb_mem_desc *req_vram) |
| 1342 | { |
| 1343 | int r; |
| 1344 | u32 l; |
| 1345 | struct lcd_panel *panel = fbdev->panel; |
| 1346 | int tmo = 10000; |
| 1347 | int skip_init = 0; |
| 1348 | int i; |
| 1349 | |
| 1350 | memset(&dispc, 0, sizeof(dispc)); |
| 1351 | |
| 1352 | dispc.base = io_p2v(DISPC_BASE); |
| 1353 | dispc.fbdev = fbdev; |
| 1354 | dispc.ext_mode = ext_mode; |
| 1355 | |
| 1356 | init_completion(&dispc.frame_done); |
| 1357 | |
| 1358 | if ((r = get_dss_clocks()) < 0) |
| 1359 | return r; |
| 1360 | |
| 1361 | enable_interface_clocks(1); |
| 1362 | enable_lcd_clocks(1); |
| 1363 | |
| 1364 | #ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT |
| 1365 | l = dispc_read_reg(DISPC_CONTROL); |
| 1366 | /* LCD enabled ? */ |
| 1367 | if (l & 1) { |
| 1368 | pr_info("omapfb: skipping hardware initialization\n"); |
| 1369 | skip_init = 1; |
| 1370 | } |
| 1371 | #endif |
| 1372 | |
| 1373 | if (!skip_init) { |
| 1374 | /* Reset monitoring works only w/ the 54M clk */ |
| 1375 | enable_digit_clocks(1); |
| 1376 | |
| 1377 | /* Soft reset */ |
| 1378 | MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1); |
| 1379 | |
| 1380 | while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) { |
| 1381 | if (!--tmo) { |
| 1382 | dev_err(dispc.fbdev->dev, "soft reset failed\n"); |
| 1383 | r = -ENODEV; |
| 1384 | enable_digit_clocks(0); |
| 1385 | goto fail1; |
| 1386 | } |
| 1387 | } |
| 1388 | |
| 1389 | enable_digit_clocks(0); |
| 1390 | } |
| 1391 | |
| 1392 | /* Enable smart idle and autoidle */ |
| 1393 | l = dispc_read_reg(DISPC_CONTROL); |
| 1394 | l &= ~((3 << 12) | (3 << 3)); |
| 1395 | l |= (2 << 12) | (2 << 3) | (1 << 0); |
| 1396 | dispc_write_reg(DISPC_SYSCONFIG, l); |
| 1397 | omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG); |
| 1398 | |
| 1399 | /* Set functional clock autogating */ |
| 1400 | l = dispc_read_reg(DISPC_CONFIG); |
| 1401 | l |= 1 << 9; |
| 1402 | dispc_write_reg(DISPC_CONFIG, l); |
| 1403 | |
| 1404 | l = dispc_read_reg(DISPC_IRQSTATUS); |
| 1405 | dispc_write_reg(l, DISPC_IRQSTATUS); |
| 1406 | |
| 1407 | /* Enable those that we handle always */ |
| 1408 | omap_dispc_enable_irqs(DISPC_IRQ_FRAMEMASK); |
| 1409 | |
| 1410 | if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler, |
| 1411 | 0, MODULE_NAME, fbdev)) < 0) { |
| 1412 | dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n"); |
| 1413 | goto fail1; |
| 1414 | } |
| 1415 | |
| 1416 | /* L3 firewall setting: enable access to OCM RAM */ |
| 1417 | __raw_writel(0x402000b0, io_p2v(0x680050a0)); |
| 1418 | |
| 1419 | if ((r = alloc_palette_ram()) < 0) |
| 1420 | goto fail2; |
| 1421 | |
| 1422 | if ((r = setup_fbmem(req_vram)) < 0) |
| 1423 | goto fail3; |
| 1424 | |
| 1425 | if (!skip_init) { |
| 1426 | for (i = 0; i < dispc.mem_desc.region_cnt; i++) { |
| 1427 | memset(dispc.mem_desc.region[i].vaddr, 0, |
| 1428 | dispc.mem_desc.region[i].size); |
| 1429 | } |
| 1430 | |
| 1431 | /* Set logic clock to fck, pixel clock to fck/2 for now */ |
| 1432 | MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16); |
| 1433 | MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0); |
| 1434 | |
| 1435 | setup_plane_fifo(0, ext_mode); |
| 1436 | setup_plane_fifo(1, ext_mode); |
| 1437 | setup_plane_fifo(2, ext_mode); |
| 1438 | |
| 1439 | setup_color_conv_coef(); |
| 1440 | |
| 1441 | set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT); |
| 1442 | set_load_mode(DISPC_LOAD_FRAME_ONLY); |
| 1443 | |
| 1444 | if (!ext_mode) { |
| 1445 | set_lcd_data_lines(panel->data_lines); |
| 1446 | omap_dispc_set_lcd_size(panel->x_res, panel->y_res); |
| 1447 | set_lcd_timings(); |
| 1448 | } else |
| 1449 | set_lcd_data_lines(panel->bpp); |
| 1450 | enable_rfbi_mode(ext_mode); |
| 1451 | } |
| 1452 | |
| 1453 | l = dispc_read_reg(DISPC_REVISION); |
| 1454 | pr_info("omapfb: DISPC version %d.%d initialized\n", |
| 1455 | l >> 4 & 0x0f, l & 0x0f); |
| 1456 | enable_lcd_clocks(0); |
| 1457 | |
| 1458 | return 0; |
| 1459 | fail3: |
| 1460 | free_palette_ram(); |
| 1461 | fail2: |
| 1462 | free_irq(INT_24XX_DSS_IRQ, fbdev); |
| 1463 | fail1: |
| 1464 | enable_lcd_clocks(0); |
| 1465 | enable_interface_clocks(0); |
| 1466 | put_dss_clocks(); |
| 1467 | |
| 1468 | return r; |
| 1469 | } |
| 1470 | |
| 1471 | static void omap_dispc_cleanup(void) |
| 1472 | { |
| 1473 | int i; |
| 1474 | |
| 1475 | omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED); |
| 1476 | /* This will also disable clocks that are on */ |
| 1477 | for (i = 0; i < dispc.mem_desc.region_cnt; i++) |
| 1478 | omap_dispc_enable_plane(i, 0); |
| 1479 | cleanup_fbmem(); |
| 1480 | free_palette_ram(); |
| 1481 | free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); |
| 1482 | enable_interface_clocks(0); |
| 1483 | put_dss_clocks(); |
| 1484 | } |
| 1485 | |
| 1486 | const struct lcd_ctrl omap2_int_ctrl = { |
| 1487 | .name = "internal", |
| 1488 | .init = omap_dispc_init, |
| 1489 | .cleanup = omap_dispc_cleanup, |
| 1490 | .get_caps = omap_dispc_get_caps, |
| 1491 | .set_update_mode = omap_dispc_set_update_mode, |
| 1492 | .get_update_mode = omap_dispc_get_update_mode, |
| 1493 | .update_window = omap_dispc_update_window, |
| 1494 | .suspend = omap_dispc_suspend, |
| 1495 | .resume = omap_dispc_resume, |
| 1496 | .setup_plane = omap_dispc_setup_plane, |
| 1497 | .setup_mem = omap_dispc_setup_mem, |
| 1498 | .set_scale = omap_dispc_set_scale, |
| 1499 | .enable_plane = omap_dispc_enable_plane, |
| 1500 | .set_color_key = omap_dispc_set_color_key, |
| 1501 | .get_color_key = omap_dispc_get_color_key, |
| 1502 | .mmap = omap_dispc_mmap_user, |
| 1503 | }; |