blob: a3847d6c946eac309fe899b8698cdb34bbe29276 [file] [log] [blame]
Kees Lemmens49cdee02007-03-27 12:34:30 +02001/*
2 * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
3 *
4 * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
5 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
6 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2003 IBM Corp.
8 *
9 * Many thanks to the authors of pl2303 driver: all functions in this file
10 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
11 *
12 * Warning! You use this driver on your own risk! The only official
13 * description of this device I have is datasheet from manufacturer,
14 * and it doesn't contain almost any information needed to write a driver.
15 * Almost all knowlegde used while writing this driver was gathered by:
16 * - analyzing traffic between device and the M$ Windows 2000 driver,
17 * - trying different bit combinations and checking pin states
18 * with a voltmeter,
19 * - receiving malformed frames and producing buffer overflows
20 * to learn how errors are reported,
21 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
22 * CONNECTED TO IT!
23 *
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2 of the License.
27 *
28 * See Documentation/usb/usb-serial.txt for more information on using this driver
29 *
30 * TODO:
31 * - implement correct flushing for ioctls and oti6858_close()
32 * - check how errors (rx overflow, parity error, framing error) are reported
33 * - implement oti6858_break_ctl()
34 * - implement more ioctls
35 * - test/implement flow control
36 * - allow setting custom baud rates
37 */
38
39#include <linux/kernel.h>
40#include <linux/errno.h>
41#include <linux/init.h>
42#include <linux/slab.h>
43#include <linux/tty.h>
44#include <linux/tty_driver.h>
45#include <linux/tty_flip.h>
46#include <linux/serial.h>
47#include <linux/module.h>
48#include <linux/moduleparam.h>
49#include <linux/spinlock.h>
50#include <linux/usb.h>
51#include <linux/usb/serial.h>
52#include <asm/uaccess.h>
53#include "oti6858.h"
54
55#define OTI6858_DESCRIPTION \
56 "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
57#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
58#define OTI6858_VERSION "0.1"
59
60static struct usb_device_id id_table [] = {
61 { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
62 { }
63};
64
65MODULE_DEVICE_TABLE(usb, id_table);
66
67static struct usb_driver oti6858_driver = {
68 .name = "oti6858",
69 .probe = usb_serial_probe,
70 .disconnect = usb_serial_disconnect,
71 .id_table = id_table,
72 .no_dynamic_id = 1,
73};
74
75static int debug;
76
77
78/* buffering code, copied from pl2303 driver */
79#define PL2303_BUF_SIZE 1024
80#define PL2303_TMP_BUF_SIZE 1024
81
Alan Coxb0a239d2008-01-19 16:02:37 +000082struct oti6858_buf {
Kees Lemmens49cdee02007-03-27 12:34:30 +020083 unsigned int buf_size;
84 char *buf_buf;
85 char *buf_get;
86 char *buf_put;
87};
88
89/* requests */
90#define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
91#define OTI6858_REQ_T_GET_STATUS 0x01
92
93#define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
94#define OTI6858_REQ_T_SET_LINE 0x00
95
96#define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
97#define OTI6858_REQ_T_CHECK_TXBUFF 0x00
98
99/* format of the control packet */
100struct oti6858_control_pkt {
101 u16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */
102#define OTI6858_MAX_BAUD_RATE 3000000
103 u8 frame_fmt;
104#define FMT_STOP_BITS_MASK 0xc0
105#define FMT_STOP_BITS_1 0x00
106#define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */
107#define FMT_PARITY_MASK 0x38
108#define FMT_PARITY_NONE 0x00
109#define FMT_PARITY_ODD 0x08
110#define FMT_PARITY_EVEN 0x18
111#define FMT_PARITY_MARK 0x28
112#define FMT_PARITY_SPACE 0x38
113#define FMT_DATA_BITS_MASK 0x03
114#define FMT_DATA_BITS_5 0x00
115#define FMT_DATA_BITS_6 0x01
116#define FMT_DATA_BITS_7 0x02
117#define FMT_DATA_BITS_8 0x03
118 u8 something; /* always equals 0x43 */
119 u8 control; /* settings of flow control lines */
120#define CONTROL_MASK 0x0c
121#define CONTROL_DTR_HIGH 0x08
122#define CONTROL_RTS_HIGH 0x04
123 u8 tx_status;
124#define TX_BUFFER_EMPTIED 0x09
125 u8 pin_state;
126#define PIN_MASK 0x3f
127#define PIN_RTS 0x20 /* output pin */
128#define PIN_CTS 0x10 /* input pin, active low */
129#define PIN_DSR 0x08 /* input pin, active low */
130#define PIN_DTR 0x04 /* output pin */
131#define PIN_RI 0x02 /* input pin, active low */
132#define PIN_DCD 0x01 /* input pin, active low */
133 u8 rx_bytes_avail; /* number of bytes in rx buffer */;
134};
135
136#define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt)
137#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
138 ( ((a)->divisor == (priv)->pending_setup.divisor) \
139 && ((a)->control == (priv)->pending_setup.control) \
140 && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) )
141
142/* function prototypes */
143static int oti6858_open(struct usb_serial_port *port, struct file *filp);
144static void oti6858_close(struct usb_serial_port *port, struct file *filp);
145static void oti6858_set_termios(struct usb_serial_port *port,
146 struct ktermios *old);
147static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
148 unsigned int cmd, unsigned long arg);
149static void oti6858_read_int_callback(struct urb *urb);
150static void oti6858_read_bulk_callback(struct urb *urb);
151static void oti6858_write_bulk_callback(struct urb *urb);
152static int oti6858_write(struct usb_serial_port *port,
153 const unsigned char *buf, int count);
154static int oti6858_write_room(struct usb_serial_port *port);
155static void oti6858_break_ctl(struct usb_serial_port *port, int break_state);
156static int oti6858_chars_in_buffer(struct usb_serial_port *port);
157static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file);
158static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
159 unsigned int set, unsigned int clear);
160static int oti6858_startup(struct usb_serial *serial);
161static void oti6858_shutdown(struct usb_serial *serial);
162
163/* functions operating on buffers */
Alan Coxb0a239d2008-01-19 16:02:37 +0000164static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
165static void oti6858_buf_free(struct oti6858_buf *pb);
166static void oti6858_buf_clear(struct oti6858_buf *pb);
167static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb);
168static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb);
169static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
Kees Lemmens49cdee02007-03-27 12:34:30 +0200170 unsigned int count);
Alan Coxb0a239d2008-01-19 16:02:37 +0000171static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
Kees Lemmens49cdee02007-03-27 12:34:30 +0200172 unsigned int count);
173
174
175/* device info */
176static struct usb_serial_driver oti6858_device = {
177 .driver = {
178 .owner = THIS_MODULE,
179 .name = "oti6858",
180 },
181 .id_table = id_table,
182 .num_interrupt_in = 1,
183 .num_bulk_in = 1,
184 .num_bulk_out = 1,
185 .num_ports = 1,
186 .open = oti6858_open,
187 .close = oti6858_close,
188 .write = oti6858_write,
189 .ioctl = oti6858_ioctl,
190 .break_ctl = oti6858_break_ctl,
191 .set_termios = oti6858_set_termios,
192 .tiocmget = oti6858_tiocmget,
193 .tiocmset = oti6858_tiocmset,
194 .read_bulk_callback = oti6858_read_bulk_callback,
195 .read_int_callback = oti6858_read_int_callback,
196 .write_bulk_callback = oti6858_write_bulk_callback,
197 .write_room = oti6858_write_room,
198 .chars_in_buffer = oti6858_chars_in_buffer,
199 .attach = oti6858_startup,
200 .shutdown = oti6858_shutdown,
201};
202
203struct oti6858_private {
204 spinlock_t lock;
205
Alan Coxb0a239d2008-01-19 16:02:37 +0000206 struct oti6858_buf *buf;
Kees Lemmens49cdee02007-03-27 12:34:30 +0200207 struct oti6858_control_pkt status;
208
209 struct {
210 u8 read_urb_in_use;
211 u8 write_urb_in_use;
212 u8 termios_initialized;
213 } flags;
214 struct delayed_work delayed_write_work;
215
216 struct {
217 u16 divisor;
218 u8 frame_fmt;
219 u8 control;
220 } pending_setup;
221 u8 transient;
222 u8 setup_done;
223 struct delayed_work delayed_setup_work;
224
225 wait_queue_head_t intr_wait;
226 struct usb_serial_port *port; /* USB port with which associated */
227};
228
229#undef dbg
230/* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */
231#define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg)
232
233static void setup_line(struct work_struct *work)
234{
235 struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_setup_work.work);
236 struct usb_serial_port *port = priv->port;
237 struct oti6858_control_pkt *new_setup;
238 unsigned long flags;
239 int result;
240
241 dbg("%s(port = %d)", __FUNCTION__, port->number);
242
243 if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
244 dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__);
245 /* we will try again */
246 schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
247 return;
248 }
249
250 result = usb_control_msg(port->serial->dev,
251 usb_rcvctrlpipe(port->serial->dev, 0),
252 OTI6858_REQ_T_GET_STATUS,
253 OTI6858_REQ_GET_STATUS,
254 0, 0,
255 new_setup, OTI6858_CTRL_PKT_SIZE,
256 100);
257
258 if (result != OTI6858_CTRL_PKT_SIZE) {
Joe Perches898eb712007-10-18 03:06:30 -0700259 dev_err(&port->dev, "%s(): error reading status\n", __FUNCTION__);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200260 kfree(new_setup);
261 /* we will try again */
262 schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
263 return;
264 }
265
266 spin_lock_irqsave(&priv->lock, flags);
267 if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
268 new_setup->divisor = priv->pending_setup.divisor;
269 new_setup->control = priv->pending_setup.control;
270 new_setup->frame_fmt = priv->pending_setup.frame_fmt;
271
272 spin_unlock_irqrestore(&priv->lock, flags);
273 result = usb_control_msg(port->serial->dev,
274 usb_sndctrlpipe(port->serial->dev, 0),
275 OTI6858_REQ_T_SET_LINE,
276 OTI6858_REQ_SET_LINE,
277 0, 0,
278 new_setup, OTI6858_CTRL_PKT_SIZE,
279 100);
280 } else {
281 spin_unlock_irqrestore(&priv->lock, flags);
282 result = 0;
283 }
284 kfree(new_setup);
285
286 spin_lock_irqsave(&priv->lock, flags);
287 if (result != OTI6858_CTRL_PKT_SIZE)
288 priv->transient = 0;
289 priv->setup_done = 1;
290 spin_unlock_irqrestore(&priv->lock, flags);
291
292 dbg("%s(): submitting interrupt urb", __FUNCTION__);
293 port->interrupt_in_urb->dev = port->serial->dev;
294 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
295 if (result != 0) {
296 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
297 " with error %d\n", __FUNCTION__, result);
298 }
299}
300
301void send_data(struct work_struct *work)
302{
303 struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_write_work.work);
304 struct usb_serial_port *port = priv->port;
305 int count = 0, result;
306 unsigned long flags;
307 unsigned char allow;
308
309 dbg("%s(port = %d)", __FUNCTION__, port->number);
310
311 spin_lock_irqsave(&priv->lock, flags);
312 if (priv->flags.write_urb_in_use) {
313 spin_unlock_irqrestore(&priv->lock, flags);
314 schedule_delayed_work(&priv->delayed_write_work, msecs_to_jiffies(2));
315 return;
316 }
317 priv->flags.write_urb_in_use = 1;
318
Alan Coxb0a239d2008-01-19 16:02:37 +0000319 count = oti6858_buf_data_avail(priv->buf);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200320 spin_unlock_irqrestore(&priv->lock, flags);
321 if (count > port->bulk_out_size)
322 count = port->bulk_out_size;
323
324 if (count != 0) {
325 result = usb_control_msg(port->serial->dev,
326 usb_rcvctrlpipe(port->serial->dev, 0),
327 OTI6858_REQ_T_CHECK_TXBUFF,
328 OTI6858_REQ_CHECK_TXBUFF,
329 count, 0, &allow, 1, 100);
330 if (result != 1 || allow != 0)
331 count = 0;
332 }
333
334 if (count == 0) {
335 priv->flags.write_urb_in_use = 0;
336
337 dbg("%s(): submitting interrupt urb", __FUNCTION__);
338 port->interrupt_in_urb->dev = port->serial->dev;
339 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
340 if (result != 0) {
341 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
342 " with error %d\n", __FUNCTION__, result);
343 }
344 return;
345 }
346
347 spin_lock_irqsave(&priv->lock, flags);
Alan Coxb0a239d2008-01-19 16:02:37 +0000348 oti6858_buf_get(priv->buf, port->write_urb->transfer_buffer, count);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200349 spin_unlock_irqrestore(&priv->lock, flags);
350
351 port->write_urb->transfer_buffer_length = count;
352 port->write_urb->dev = port->serial->dev;
353 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
354 if (result != 0) {
355 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
356 " with error %d\n", __FUNCTION__, result);
357 priv->flags.write_urb_in_use = 0;
358 }
359
360 usb_serial_port_softint(port);
361}
362
363static int oti6858_startup(struct usb_serial *serial)
364{
365 struct usb_serial_port *port = serial->port[0];
366 struct oti6858_private *priv;
367 int i;
368
369 for (i = 0; i < serial->num_ports; ++i) {
370 priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
371 if (!priv)
372 break;
Alan Coxb0a239d2008-01-19 16:02:37 +0000373 priv->buf = oti6858_buf_alloc(PL2303_BUF_SIZE);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200374 if (priv->buf == NULL) {
375 kfree(priv);
376 break;
377 }
378
379 spin_lock_init(&priv->lock);
380 init_waitqueue_head(&priv->intr_wait);
381// INIT_WORK(&priv->setup_work, setup_line, serial->port[i]);
382// INIT_WORK(&priv->write_work, send_data, serial->port[i]);
383 priv->port = port;
384 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
385 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
386
387 usb_set_serial_port_data(serial->port[i], priv);
388 }
389 if (i == serial->num_ports)
390 return 0;
391
392 for (--i; i >= 0; --i) {
393 priv = usb_get_serial_port_data(serial->port[i]);
Alan Coxb0a239d2008-01-19 16:02:37 +0000394 oti6858_buf_free(priv->buf);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200395 kfree(priv);
396 usb_set_serial_port_data(serial->port[i], NULL);
397 }
398 return -ENOMEM;
399}
400
401static int oti6858_write(struct usb_serial_port *port,
402 const unsigned char *buf, int count)
403{
404 struct oti6858_private *priv = usb_get_serial_port_data(port);
405 unsigned long flags;
406
407 dbg("%s(port = %d, count = %d)", __FUNCTION__, port->number, count);
408
409 if (!count)
410 return count;
411
412 spin_lock_irqsave(&priv->lock, flags);
Alan Coxb0a239d2008-01-19 16:02:37 +0000413 count = oti6858_buf_put(priv->buf, buf, count);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200414 spin_unlock_irqrestore(&priv->lock, flags);
415
416 return count;
417}
418
419static int oti6858_write_room(struct usb_serial_port *port)
420{
421 struct oti6858_private *priv = usb_get_serial_port_data(port);
422 int room = 0;
423 unsigned long flags;
424
425 dbg("%s(port = %d)", __FUNCTION__, port->number);
426
427 spin_lock_irqsave(&priv->lock, flags);
Alan Coxb0a239d2008-01-19 16:02:37 +0000428 room = oti6858_buf_space_avail(priv->buf);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200429 spin_unlock_irqrestore(&priv->lock, flags);
430
431 return room;
432}
433
434static int oti6858_chars_in_buffer(struct usb_serial_port *port)
435{
436 struct oti6858_private *priv = usb_get_serial_port_data(port);
437 int chars = 0;
438 unsigned long flags;
439
440 dbg("%s(port = %d)", __FUNCTION__, port->number);
441
442 spin_lock_irqsave(&priv->lock, flags);
Alan Coxb0a239d2008-01-19 16:02:37 +0000443 chars = oti6858_buf_data_avail(priv->buf);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200444 spin_unlock_irqrestore(&priv->lock, flags);
445
446 return chars;
447}
448
449static void oti6858_set_termios(struct usb_serial_port *port,
450 struct ktermios *old_termios)
451{
452 struct oti6858_private *priv = usb_get_serial_port_data(port);
453 unsigned long flags;
454 unsigned int cflag;
455 u8 frame_fmt, control;
456 u16 divisor;
457 int br;
458
459 dbg("%s(port = %d)", __FUNCTION__, port->number);
460
Alan Coxb0a239d2008-01-19 16:02:37 +0000461 if (!port->tty || !port->tty->termios) {
Kees Lemmens49cdee02007-03-27 12:34:30 +0200462 dbg("%s(): no tty structures", __FUNCTION__);
463 return;
464 }
465
466 spin_lock_irqsave(&priv->lock, flags);
467 if (!priv->flags.termios_initialized) {
468 *(port->tty->termios) = tty_std_termios;
469 port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
470 priv->flags.termios_initialized = 1;
Alan Coxb0a239d2008-01-19 16:02:37 +0000471 port->tty->termios->c_ispeed = 38400;
472 port->tty->termios->c_ospeed = 38400;
Kees Lemmens49cdee02007-03-27 12:34:30 +0200473 }
474 spin_unlock_irqrestore(&priv->lock, flags);
475
476 cflag = port->tty->termios->c_cflag;
477
478 spin_lock_irqsave(&priv->lock, flags);
479 divisor = priv->pending_setup.divisor;
480 frame_fmt = priv->pending_setup.frame_fmt;
481 control = priv->pending_setup.control;
482 spin_unlock_irqrestore(&priv->lock, flags);
483
484 frame_fmt &= ~FMT_DATA_BITS_MASK;
485 switch (cflag & CSIZE) {
486 case CS5:
487 frame_fmt |= FMT_DATA_BITS_5;
488 break;
489 case CS6:
490 frame_fmt |= FMT_DATA_BITS_6;
491 break;
492 case CS7:
493 frame_fmt |= FMT_DATA_BITS_7;
494 break;
495 default:
496 case CS8:
497 frame_fmt |= FMT_DATA_BITS_8;
498 break;
499 }
500
501 /* manufacturer claims that this device can work with baud rates
502 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
503 * guarantee that any other baud rate will work (especially
504 * the higher ones)
505 */
506 br = tty_get_baud_rate(port->tty);
507 if (br == 0) {
508 divisor = 0;
Alan Coxb0a239d2008-01-19 16:02:37 +0000509 } else {
Kees Lemmens49cdee02007-03-27 12:34:30 +0200510 int real_br;
Alan Coxb0a239d2008-01-19 16:02:37 +0000511 br = min(br, OTI6858_MAX_BAUD_RATE);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200512
513 divisor = (96000000 + 8 * br) / (16 * br);
514 real_br = 96000000 / (16 * divisor);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200515 divisor = cpu_to_le16(divisor);
Alan Coxb0a239d2008-01-19 16:02:37 +0000516 tty_encode_baud_rate(port->tty, real_br, real_br);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200517 }
518
519 frame_fmt &= ~FMT_STOP_BITS_MASK;
520 if ((cflag & CSTOPB) != 0) {
521 frame_fmt |= FMT_STOP_BITS_2;
522 } else {
523 frame_fmt |= FMT_STOP_BITS_1;
524 }
525
526 frame_fmt &= ~FMT_PARITY_MASK;
527 if ((cflag & PARENB) != 0) {
528 if ((cflag & PARODD) != 0) {
529 frame_fmt |= FMT_PARITY_ODD;
530 } else {
531 frame_fmt |= FMT_PARITY_EVEN;
532 }
533 } else {
534 frame_fmt |= FMT_PARITY_NONE;
535 }
536
537 control &= ~CONTROL_MASK;
538 if ((cflag & CRTSCTS) != 0)
539 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
540
541 /* change control lines if we are switching to or from B0 */
542 /* FIXME:
543 spin_lock_irqsave(&priv->lock, flags);
544 control = priv->line_control;
545 if ((cflag & CBAUD) == B0)
546 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
547 else
548 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
549 if (control != priv->line_control) {
550 control = priv->line_control;
551 spin_unlock_irqrestore(&priv->lock, flags);
552 set_control_lines(serial->dev, control);
553 } else {
554 spin_unlock_irqrestore(&priv->lock, flags);
555 }
556 */
557
558 spin_lock_irqsave(&priv->lock, flags);
559 if (divisor != priv->pending_setup.divisor
560 || control != priv->pending_setup.control
561 || frame_fmt != priv->pending_setup.frame_fmt) {
562 priv->pending_setup.divisor = divisor;
563 priv->pending_setup.control = control;
564 priv->pending_setup.frame_fmt = frame_fmt;
565 }
566 spin_unlock_irqrestore(&priv->lock, flags);
567}
568
569static int oti6858_open(struct usb_serial_port *port, struct file *filp)
570{
571 struct oti6858_private *priv = usb_get_serial_port_data(port);
572 struct ktermios tmp_termios;
573 struct usb_serial *serial = port->serial;
574 struct oti6858_control_pkt *buf;
575 unsigned long flags;
576 int result;
577
578 dbg("%s(port = %d)", __FUNCTION__, port->number);
579
580 usb_clear_halt(serial->dev, port->write_urb->pipe);
581 usb_clear_halt(serial->dev, port->read_urb->pipe);
582
583 if (port->open_count != 1)
584 return 0;
585
586 if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
587 dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__);
588 return -ENOMEM;
589 }
590
591 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
592 OTI6858_REQ_T_GET_STATUS,
593 OTI6858_REQ_GET_STATUS,
594 0, 0,
595 buf, OTI6858_CTRL_PKT_SIZE,
596 100);
597 if (result != OTI6858_CTRL_PKT_SIZE) {
598 /* assume default (after power-on reset) values */
599 buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */
600 buf->frame_fmt = 0x03; /* 8N1 */
601 buf->something = 0x43;
602 buf->control = 0x4c; /* DTR, RTS */
603 buf->tx_status = 0x00;
604 buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */
605 buf->rx_bytes_avail = 0x00;
606 }
607
608 spin_lock_irqsave(&priv->lock, flags);
609 memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
610 priv->pending_setup.divisor = buf->divisor;
611 priv->pending_setup.frame_fmt = buf->frame_fmt;
612 priv->pending_setup.control = buf->control;
613 spin_unlock_irqrestore(&priv->lock, flags);
614 kfree(buf);
615
616 dbg("%s(): submitting interrupt urb", __FUNCTION__);
617 port->interrupt_in_urb->dev = serial->dev;
618 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
619 if (result != 0) {
620 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
621 " with error %d\n", __FUNCTION__, result);
622 oti6858_close(port, NULL);
623 return -EPROTO;
624 }
625
626 /* setup termios */
627 if (port->tty)
628 oti6858_set_termios(port, &tmp_termios);
629
630 return 0;
631}
632
633static void oti6858_close(struct usb_serial_port *port, struct file *filp)
634{
635 struct oti6858_private *priv = usb_get_serial_port_data(port);
636 unsigned long flags;
637 long timeout;
638 wait_queue_t wait;
639
640 dbg("%s(port = %d)", __FUNCTION__, port->number);
641
642 /* wait for data to drain from the buffer */
643 spin_lock_irqsave(&priv->lock, flags);
644 timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
645 init_waitqueue_entry(&wait, current);
646 add_wait_queue(&port->tty->write_wait, &wait);
647 dbg("%s(): entering wait loop", __FUNCTION__);
648 for (;;) {
649 set_current_state(TASK_INTERRUPTIBLE);
Alan Coxb0a239d2008-01-19 16:02:37 +0000650 if (oti6858_buf_data_avail(priv->buf) == 0
Kees Lemmens49cdee02007-03-27 12:34:30 +0200651 || timeout == 0 || signal_pending(current)
Oliver Neukum0915f492008-01-23 12:28:45 +0100652 || port->serial->disconnected)
Kees Lemmens49cdee02007-03-27 12:34:30 +0200653 break;
654 spin_unlock_irqrestore(&priv->lock, flags);
655 timeout = schedule_timeout(timeout);
656 spin_lock_irqsave(&priv->lock, flags);
657 }
658 set_current_state(TASK_RUNNING);
659 remove_wait_queue(&port->tty->write_wait, &wait);
660 dbg("%s(): after wait loop", __FUNCTION__);
661
662 /* clear out any remaining data in the buffer */
Alan Coxb0a239d2008-01-19 16:02:37 +0000663 oti6858_buf_clear(priv->buf);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200664 spin_unlock_irqrestore(&priv->lock, flags);
665
666 /* wait for characters to drain from the device */
667 /* (this is long enough for the entire 256 byte */
668 /* pl2303 hardware buffer to drain with no flow */
669 /* control for data rates of 1200 bps or more, */
670 /* for lower rates we should really know how much */
671 /* data is in the buffer to compute a delay */
672 /* that is not unnecessarily long) */
673 /* FIXME
674 bps = tty_get_baud_rate(port->tty);
675 if (bps > 1200)
676 timeout = max((HZ*2560)/bps,HZ/10);
677 else
678 */
679 timeout = 2*HZ;
680 schedule_timeout_interruptible(timeout);
681 dbg("%s(): after schedule_timeout_interruptible()", __FUNCTION__);
682
683 /* cancel scheduled setup */
684 cancel_delayed_work(&priv->delayed_setup_work);
685 cancel_delayed_work(&priv->delayed_write_work);
686 flush_scheduled_work();
687
688 /* shutdown our urbs */
689 dbg("%s(): shutting down urbs", __FUNCTION__);
690 usb_kill_urb(port->write_urb);
691 usb_kill_urb(port->read_urb);
692 usb_kill_urb(port->interrupt_in_urb);
693
694 /*
695 if (port->tty && (port->tty->termios->c_cflag) & HUPCL) {
696 // drop DTR and RTS
697 spin_lock_irqsave(&priv->lock, flags);
698 priv->pending_setup.control &= ~CONTROL_MASK;
699 spin_unlock_irqrestore(&priv->lock, flags);
700 }
701 */
702}
703
704static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
705 unsigned int set, unsigned int clear)
706{
707 struct oti6858_private *priv = usb_get_serial_port_data(port);
708 unsigned long flags;
709 u8 control;
710
711 dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
712 __FUNCTION__, port->number, set, clear);
713
714 if (!usb_get_intfdata(port->serial->interface))
715 return -ENODEV;
716
717 /* FIXME: check if this is correct (active high/low) */
718 spin_lock_irqsave(&priv->lock, flags);
719 control = priv->pending_setup.control;
720 if ((set & TIOCM_RTS) != 0)
721 control |= CONTROL_RTS_HIGH;
722 if ((set & TIOCM_DTR) != 0)
723 control |= CONTROL_DTR_HIGH;
724 if ((clear & TIOCM_RTS) != 0)
725 control &= ~CONTROL_RTS_HIGH;
726 if ((clear & TIOCM_DTR) != 0)
727 control &= ~CONTROL_DTR_HIGH;
728
729 if (control != priv->pending_setup.control) {
730 priv->pending_setup.control = control;
731 }
732 spin_unlock_irqrestore(&priv->lock, flags);
733
734 return 0;
735}
736
737static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file)
738{
739 struct oti6858_private *priv = usb_get_serial_port_data(port);
740 unsigned long flags;
741 unsigned pin_state;
742 unsigned result = 0;
743
744 dbg("%s(port = %d)", __FUNCTION__, port->number);
745
746 if (!usb_get_intfdata(port->serial->interface))
747 return -ENODEV;
748
749 spin_lock_irqsave(&priv->lock, flags);
750 pin_state = priv->status.pin_state & PIN_MASK;
751 spin_unlock_irqrestore(&priv->lock, flags);
752
753 /* FIXME: check if this is correct (active high/low) */
754 if ((pin_state & PIN_RTS) != 0)
755 result |= TIOCM_RTS;
756 if ((pin_state & PIN_CTS) != 0)
757 result |= TIOCM_CTS;
758 if ((pin_state & PIN_DSR) != 0)
759 result |= TIOCM_DSR;
760 if ((pin_state & PIN_DTR) != 0)
761 result |= TIOCM_DTR;
762 if ((pin_state & PIN_RI) != 0)
763 result |= TIOCM_RI;
764 if ((pin_state & PIN_DCD) != 0)
765 result |= TIOCM_CD;
766
767 dbg("%s() = 0x%08x", __FUNCTION__, result);
768
769 return result;
770}
771
772static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
773{
774 struct oti6858_private *priv = usb_get_serial_port_data(port);
775 unsigned long flags;
776 unsigned int prev, status;
777 unsigned int changed;
778
779 spin_lock_irqsave(&priv->lock, flags);
780 prev = priv->status.pin_state;
781 spin_unlock_irqrestore(&priv->lock, flags);
782
783 while (1) {
784 wait_event_interruptible(priv->intr_wait, priv->status.pin_state != prev);
785 if (signal_pending(current))
786 return -ERESTARTSYS;
787
788 spin_lock_irqsave(&priv->lock, flags);
789 status = priv->status.pin_state & PIN_MASK;
790 spin_unlock_irqrestore(&priv->lock, flags);
791
792 changed = prev ^ status;
793 /* FIXME: check if this is correct (active high/low) */
794 if ( ((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
795 ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
796 ((arg & TIOCM_CD) && (changed & PIN_DCD)) ||
797 ((arg & TIOCM_CTS) && (changed & PIN_CTS))) {
798 return 0;
799 }
800 prev = status;
801 }
802
803 /* NOTREACHED */
804 return 0;
805}
806
807static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
808 unsigned int cmd, unsigned long arg)
809{
810 void __user *user_arg = (void __user *) arg;
811 unsigned int x;
812
813 dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
814 __FUNCTION__, port->number, cmd, arg);
815
816 switch (cmd) {
Kees Lemmens49cdee02007-03-27 12:34:30 +0200817 case TCFLSH:
818 /* FIXME */
819 return 0;
820
821 case TIOCMBIS:
822 if (copy_from_user(&x, user_arg, sizeof(x)))
823 return -EFAULT;
824 return oti6858_tiocmset(port, NULL, x, 0);
825
826 case TIOCMBIC:
827 if (copy_from_user(&x, user_arg, sizeof(x)))
828 return -EFAULT;
829 return oti6858_tiocmset(port, NULL, 0, x);
830
Kees Lemmens49cdee02007-03-27 12:34:30 +0200831 case TIOCMIWAIT:
832 dbg("%s(): TIOCMIWAIT", __FUNCTION__);
833 return wait_modem_info(port, arg);
834
835 default:
836 dbg("%s(): 0x%04x not supported", __FUNCTION__, cmd);
837 break;
838 }
839
840 return -ENOIOCTLCMD;
841}
842
843static void oti6858_break_ctl(struct usb_serial_port *port, int break_state)
844{
845 int state;
846
847 dbg("%s(port = %d)", __FUNCTION__, port->number);
848
849 state = (break_state == 0) ? 0 : 1;
850 dbg("%s(): turning break %s", __FUNCTION__, state ? "on" : "off");
851
852 /* FIXME */
853/*
854 result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
855 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
856 0, NULL, 0, 100);
857 if (result != 0)
858 dbg("%s(): error sending break", __FUNCTION__);
859 */
860}
861
862static void oti6858_shutdown(struct usb_serial *serial)
863{
864 struct oti6858_private *priv;
865 int i;
866
867 dbg("%s()", __FUNCTION__);
868
869 for (i = 0; i < serial->num_ports; ++i) {
870 priv = usb_get_serial_port_data(serial->port[i]);
871 if (priv) {
Alan Coxb0a239d2008-01-19 16:02:37 +0000872 oti6858_buf_free(priv->buf);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200873 kfree(priv);
874 usb_set_serial_port_data(serial->port[i], NULL);
875 }
876 }
877}
878
879static void oti6858_read_int_callback(struct urb *urb)
880{
881 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
882 struct oti6858_private *priv = usb_get_serial_port_data(port);
883 int transient = 0, can_recv = 0, resubmit = 1;
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -0700884 int status = urb->status;
Kees Lemmens49cdee02007-03-27 12:34:30 +0200885
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -0700886 dbg("%s(port = %d, status = %d)",
887 __FUNCTION__, port->number, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200888
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -0700889 switch (status) {
Kees Lemmens49cdee02007-03-27 12:34:30 +0200890 case 0:
891 /* success */
892 break;
893 case -ECONNRESET:
894 case -ENOENT:
895 case -ESHUTDOWN:
896 /* this urb is terminated, clean up */
897 dbg("%s(): urb shutting down with status: %d",
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -0700898 __FUNCTION__, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200899 return;
900 default:
901 dbg("%s(): nonzero urb status received: %d",
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -0700902 __FUNCTION__, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +0200903 break;
904 }
905
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -0700906 if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
Kees Lemmens49cdee02007-03-27 12:34:30 +0200907 struct oti6858_control_pkt *xs = urb->transfer_buffer;
908 unsigned long flags;
909
910 spin_lock_irqsave(&priv->lock, flags);
911
912 if (!priv->transient) {
913 if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
914 if (xs->rx_bytes_avail == 0) {
915 priv->transient = 4;
916 priv->setup_done = 0;
917 resubmit = 0;
918 dbg("%s(): scheduling setup_line()",
919 __FUNCTION__);
920 schedule_delayed_work(&priv->delayed_setup_work, 0);
921 }
922 }
923 } else {
924 if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
925 priv->transient = 0;
926 } else if (!priv->setup_done) {
927 resubmit = 0;
928 } else if (--priv->transient == 0) {
929 if (xs->rx_bytes_avail == 0) {
930 priv->transient = 4;
931 priv->setup_done = 0;
932 resubmit = 0;
933 dbg("%s(): scheduling setup_line()",
934 __FUNCTION__);
935 schedule_delayed_work(&priv->delayed_setup_work, 0);
936 }
937 }
938 }
939
940 if (!priv->transient) {
941 if (xs->pin_state != priv->status.pin_state)
942 wake_up_interruptible(&priv->intr_wait);
943 memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
944 }
945
946 if (!priv->transient && xs->rx_bytes_avail != 0) {
947 can_recv = xs->rx_bytes_avail;
948 priv->flags.read_urb_in_use = 1;
949 }
950
951 transient = priv->transient;
952 spin_unlock_irqrestore(&priv->lock, flags);
953 }
954
955 if (can_recv) {
956 int result;
957
958 port->read_urb->dev = port->serial->dev;
959 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
960 if (result != 0) {
961 priv->flags.read_urb_in_use = 0;
962 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
963 " error %d\n", __FUNCTION__, result);
964 } else {
965 resubmit = 0;
966 }
967 } else if (!transient) {
968 unsigned long flags;
969
970 spin_lock_irqsave(&priv->lock, flags);
971 if (priv->flags.write_urb_in_use == 0
Alan Coxb0a239d2008-01-19 16:02:37 +0000972 && oti6858_buf_data_avail(priv->buf) != 0) {
Kees Lemmens49cdee02007-03-27 12:34:30 +0200973 schedule_delayed_work(&priv->delayed_write_work,0);
974 resubmit = 0;
975 }
976 spin_unlock_irqrestore(&priv->lock, flags);
977 }
978
979 if (resubmit) {
980 int result;
981
982// dbg("%s(): submitting interrupt urb", __FUNCTION__);
983 urb->dev = port->serial->dev;
984 result = usb_submit_urb(urb, GFP_ATOMIC);
985 if (result != 0) {
986 dev_err(&urb->dev->dev,
987 "%s(): usb_submit_urb() failed with"
988 " error %d\n", __FUNCTION__, result);
989 }
990 }
991}
992
993static void oti6858_read_bulk_callback(struct urb *urb)
994{
995 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
996 struct oti6858_private *priv = usb_get_serial_port_data(port);
997 struct tty_struct *tty;
998 unsigned char *data = urb->transfer_buffer;
999 unsigned long flags;
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001000 int status = urb->status;
Alan Coxb0a239d2008-01-19 16:02:37 +00001001 int result;
Kees Lemmens49cdee02007-03-27 12:34:30 +02001002
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001003 dbg("%s(port = %d, status = %d)",
1004 __FUNCTION__, port->number, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001005
1006 spin_lock_irqsave(&priv->lock, flags);
1007 priv->flags.read_urb_in_use = 0;
1008 spin_unlock_irqrestore(&priv->lock, flags);
1009
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001010 if (status != 0) {
Kees Lemmens49cdee02007-03-27 12:34:30 +02001011 if (!port->open_count) {
1012 dbg("%s(): port is closed, exiting", __FUNCTION__);
1013 return;
1014 }
1015 /*
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001016 if (status == -EPROTO) {
Kees Lemmens49cdee02007-03-27 12:34:30 +02001017 // PL2303 mysteriously fails with -EPROTO reschedule the read
1018 dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001019 result = usb_submit_urb(urb, GFP_ATOMIC);
1020 if (result)
1021 dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
1022 return;
1023 }
1024 */
1025 dbg("%s(): unable to handle the error, exiting", __FUNCTION__);
1026 return;
1027 }
1028
Kees Lemmens49cdee02007-03-27 12:34:30 +02001029 tty = port->tty;
1030 if (tty != NULL && urb->actual_length > 0) {
Alan Coxb0a239d2008-01-19 16:02:37 +00001031 tty_insert_flip_string(tty, data, urb->actual_length);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001032 tty_flip_buffer_push(tty);
1033 }
1034
1035 // schedule the interrupt urb if we are still open */
1036 if (port->open_count != 0) {
1037 port->interrupt_in_urb->dev = port->serial->dev;
1038 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1039 if (result != 0) {
1040 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
1041 " error %d\n", __FUNCTION__, result);
1042 }
1043 }
1044}
1045
1046static void oti6858_write_bulk_callback(struct urb *urb)
1047{
1048 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
1049 struct oti6858_private *priv = usb_get_serial_port_data(port);
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001050 int status = urb->status;
Kees Lemmens49cdee02007-03-27 12:34:30 +02001051 int result;
1052
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001053 dbg("%s(port = %d, status = %d)",
1054 __FUNCTION__, port->number, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001055
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001056 switch (status) {
Kees Lemmens49cdee02007-03-27 12:34:30 +02001057 case 0:
1058 /* success */
1059 break;
1060 case -ECONNRESET:
1061 case -ENOENT:
1062 case -ESHUTDOWN:
1063 /* this urb is terminated, clean up */
1064 dbg("%s(): urb shutting down with status: %d",
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001065 __FUNCTION__, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001066 priv->flags.write_urb_in_use = 0;
1067 return;
1068 default:
1069 /* error in the urb, so we have to resubmit it */
1070 dbg("%s(): nonzero write bulk status received: %d",
Greg Kroah-Hartman78c26ae2007-06-15 15:44:13 -07001071 __FUNCTION__, status);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001072 dbg("%s(): overflow in write", __FUNCTION__);
1073
1074 port->write_urb->transfer_buffer_length = 1;
1075 port->write_urb->dev = port->serial->dev;
1076 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1077 if (result) {
1078 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
1079 " error %d\n", __FUNCTION__, result);
1080 } else {
1081 return;
1082 }
1083 }
1084
1085 priv->flags.write_urb_in_use = 0;
1086
1087 // schedule the interrupt urb if we are still open */
1088 port->interrupt_in_urb->dev = port->serial->dev;
1089 dbg("%s(): submitting interrupt urb", __FUNCTION__);
1090 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1091 if (result != 0) {
1092 dev_err(&port->dev, "%s(): failed submitting int urb,"
1093 " error %d\n", __FUNCTION__, result);
1094 }
1095}
1096
1097
1098/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001099 * oti6858_buf_alloc
Kees Lemmens49cdee02007-03-27 12:34:30 +02001100 *
1101 * Allocate a circular buffer and all associated memory.
1102 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001103static struct oti6858_buf *oti6858_buf_alloc(unsigned int size)
Kees Lemmens49cdee02007-03-27 12:34:30 +02001104{
Alan Coxb0a239d2008-01-19 16:02:37 +00001105 struct oti6858_buf *pb;
Kees Lemmens49cdee02007-03-27 12:34:30 +02001106
1107 if (size == 0)
1108 return NULL;
1109
Alan Coxb0a239d2008-01-19 16:02:37 +00001110 pb = kmalloc(sizeof(struct oti6858_buf), GFP_KERNEL);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001111 if (pb == NULL)
1112 return NULL;
1113
1114 pb->buf_buf = kmalloc(size, GFP_KERNEL);
1115 if (pb->buf_buf == NULL) {
1116 kfree(pb);
1117 return NULL;
1118 }
1119
1120 pb->buf_size = size;
1121 pb->buf_get = pb->buf_put = pb->buf_buf;
1122
1123 return pb;
1124}
1125
1126/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001127 * oti6858_buf_free
Kees Lemmens49cdee02007-03-27 12:34:30 +02001128 *
1129 * Free the buffer and all associated memory.
1130 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001131static void oti6858_buf_free(struct oti6858_buf *pb)
Kees Lemmens49cdee02007-03-27 12:34:30 +02001132{
1133 if (pb) {
1134 kfree(pb->buf_buf);
1135 kfree(pb);
1136 }
1137}
1138
1139/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001140 * oti6858_buf_clear
Kees Lemmens49cdee02007-03-27 12:34:30 +02001141 *
1142 * Clear out all data in the circular buffer.
1143 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001144static void oti6858_buf_clear(struct oti6858_buf *pb)
Kees Lemmens49cdee02007-03-27 12:34:30 +02001145{
1146 if (pb != NULL) {
1147 /* equivalent to a get of all data available */
1148 pb->buf_get = pb->buf_put;
1149 }
1150}
1151
1152/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001153 * oti6858_buf_data_avail
Kees Lemmens49cdee02007-03-27 12:34:30 +02001154 *
1155 * Return the number of bytes of data available in the circular
1156 * buffer.
1157 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001158static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb)
Kees Lemmens49cdee02007-03-27 12:34:30 +02001159{
1160 if (pb == NULL)
1161 return 0;
1162 return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
1163}
1164
1165/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001166 * oti6858_buf_space_avail
Kees Lemmens49cdee02007-03-27 12:34:30 +02001167 *
1168 * Return the number of bytes of space available in the circular
1169 * buffer.
1170 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001171static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb)
Kees Lemmens49cdee02007-03-27 12:34:30 +02001172{
1173 if (pb == NULL)
1174 return 0;
1175 return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
1176}
1177
1178/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001179 * oti6858_buf_put
Kees Lemmens49cdee02007-03-27 12:34:30 +02001180 *
1181 * Copy data data from a user buffer and put it into the circular buffer.
1182 * Restrict to the amount of space available.
1183 *
1184 * Return the number of bytes copied.
1185 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001186static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
Kees Lemmens49cdee02007-03-27 12:34:30 +02001187 unsigned int count)
1188{
1189 unsigned int len;
1190
1191 if (pb == NULL)
1192 return 0;
1193
Alan Coxb0a239d2008-01-19 16:02:37 +00001194 len = oti6858_buf_space_avail(pb);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001195 if (count > len)
1196 count = len;
1197
1198 if (count == 0)
1199 return 0;
1200
1201 len = pb->buf_buf + pb->buf_size - pb->buf_put;
1202 if (count > len) {
1203 memcpy(pb->buf_put, buf, len);
1204 memcpy(pb->buf_buf, buf+len, count - len);
1205 pb->buf_put = pb->buf_buf + count - len;
1206 } else {
1207 memcpy(pb->buf_put, buf, count);
1208 if (count < len)
1209 pb->buf_put += count;
1210 else /* count == len */
1211 pb->buf_put = pb->buf_buf;
1212 }
1213
1214 return count;
1215}
1216
1217/*
Alan Coxb0a239d2008-01-19 16:02:37 +00001218 * oti6858_buf_get
Kees Lemmens49cdee02007-03-27 12:34:30 +02001219 *
1220 * Get data from the circular buffer and copy to the given buffer.
1221 * Restrict to the amount of data available.
1222 *
1223 * Return the number of bytes copied.
1224 */
Alan Coxb0a239d2008-01-19 16:02:37 +00001225static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
Kees Lemmens49cdee02007-03-27 12:34:30 +02001226 unsigned int count)
1227{
1228 unsigned int len;
1229
1230 if (pb == NULL)
1231 return 0;
1232
Alan Coxb0a239d2008-01-19 16:02:37 +00001233 len = oti6858_buf_data_avail(pb);
Kees Lemmens49cdee02007-03-27 12:34:30 +02001234 if (count > len)
1235 count = len;
1236
1237 if (count == 0)
1238 return 0;
1239
1240 len = pb->buf_buf + pb->buf_size - pb->buf_get;
1241 if (count > len) {
1242 memcpy(buf, pb->buf_get, len);
1243 memcpy(buf+len, pb->buf_buf, count - len);
1244 pb->buf_get = pb->buf_buf + count - len;
1245 } else {
1246 memcpy(buf, pb->buf_get, count);
1247 if (count < len)
1248 pb->buf_get += count;
1249 else /* count == len */
1250 pb->buf_get = pb->buf_buf;
1251 }
1252
1253 return count;
1254}
1255
1256/* module description and (de)initialization */
1257
1258static int __init oti6858_init(void)
1259{
1260 int retval;
1261
1262 if ((retval = usb_serial_register(&oti6858_device)) == 0) {
1263 if ((retval = usb_register(&oti6858_driver)) != 0)
1264 usb_serial_deregister(&oti6858_device);
1265 else
1266 return 0;
1267 }
1268
1269 return retval;
1270}
1271
1272static void __exit oti6858_exit(void)
1273{
1274 usb_deregister(&oti6858_driver);
1275 usb_serial_deregister(&oti6858_device);
1276}
1277
1278module_init(oti6858_init);
1279module_exit(oti6858_exit);
1280
1281MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
1282MODULE_AUTHOR(OTI6858_AUTHOR);
1283MODULE_VERSION(OTI6858_VERSION);
1284MODULE_LICENSE("GPL");
1285
1286module_param(debug, bool, S_IRUGO | S_IWUSR);
1287MODULE_PARM_DESC(debug, "enable debug output");
1288