| /* |
| * Intel E3-1200 |
| * Copyright (C) 2014 Jason Baron <jbaron@akamai.com> |
| * |
| * Support for the E3-1200 processor family. Heavily based on previous |
| * Intel EDAC drivers. |
| * |
| * Since the DRAM controller is on the cpu chip, we can use its PCI device |
| * id to identify these processors. |
| * |
| * PCI DRAM controller device ids (Taken from The PCI ID Repository - http://pci-ids.ucw.cz/) |
| * |
| * 0108: Xeon E3-1200 Processor Family DRAM Controller |
| * 010c: Xeon E3-1200/2nd Generation Core Processor Family DRAM Controller |
| * 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller |
| * 0158: Xeon E3-1200 v2/Ivy Bridge DRAM Controller |
| * 015c: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller |
| * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller |
| * 0c08: Xeon E3-1200 v3 Processor DRAM Controller |
| * 1918: Xeon E3-1200 v5 Skylake Host Bridge/DRAM Registers |
| * |
| * Based on Intel specification: |
| * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v3-vol-2-datasheet.pdf |
| * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html |
| * |
| * According to the above datasheet (p.16): |
| * " |
| * 6. Software must not access B0/D0/F0 32-bit memory-mapped registers with |
| * requests that cross a DW boundary. |
| * " |
| * |
| * Thus, we make use of the explicit: lo_hi_readq(), which breaks the readq into |
| * 2 readl() calls. This restriction may be lifted in subsequent chip releases, |
| * but lo_hi_readq() ensures that we are safe across all e3-1200 processors. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/edac.h> |
| |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| #include "edac_core.h" |
| |
| #define IE31200_REVISION "1.0" |
| #define EDAC_MOD_STR "ie31200_edac" |
| |
| #define ie31200_printk(level, fmt, arg...) \ |
| edac_printk(level, "ie31200", fmt, ##arg) |
| |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108 |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150 |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158 |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04 |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08 |
| #define PCI_DEVICE_ID_INTEL_IE31200_HB_8 0x1918 |
| |
| #define IE31200_DIMMS 4 |
| #define IE31200_RANKS 8 |
| #define IE31200_RANKS_PER_CHANNEL 4 |
| #define IE31200_DIMMS_PER_CHANNEL 2 |
| #define IE31200_CHANNELS 2 |
| |
| /* Intel IE31200 register addresses - device 0 function 0 - DRAM Controller */ |
| #define IE31200_MCHBAR_LOW 0x48 |
| #define IE31200_MCHBAR_HIGH 0x4c |
| #define IE31200_MCHBAR_MASK GENMASK_ULL(38, 15) |
| #define IE31200_MMR_WINDOW_SIZE BIT(15) |
| |
| /* |
| * Error Status Register (16b) |
| * |
| * 15 reserved |
| * 14 Isochronous TBWRR Run Behind FIFO Full |
| * (ITCV) |
| * 13 Isochronous TBWRR Run Behind FIFO Put |
| * (ITSTV) |
| * 12 reserved |
| * 11 MCH Thermal Sensor Event |
| * for SMI/SCI/SERR (GTSE) |
| * 10 reserved |
| * 9 LOCK to non-DRAM Memory Flag (LCKF) |
| * 8 reserved |
| * 7 DRAM Throttle Flag (DTF) |
| * 6:2 reserved |
| * 1 Multi-bit DRAM ECC Error Flag (DMERR) |
| * 0 Single-bit DRAM ECC Error Flag (DSERR) |
| */ |
| #define IE31200_ERRSTS 0xc8 |
| #define IE31200_ERRSTS_UE BIT(1) |
| #define IE31200_ERRSTS_CE BIT(0) |
| #define IE31200_ERRSTS_BITS (IE31200_ERRSTS_UE | IE31200_ERRSTS_CE) |
| |
| /* |
| * Channel 0 ECC Error Log (64b) |
| * |
| * 63:48 Error Column Address (ERRCOL) |
| * 47:32 Error Row Address (ERRROW) |
| * 31:29 Error Bank Address (ERRBANK) |
| * 28:27 Error Rank Address (ERRRANK) |
| * 26:24 reserved |
| * 23:16 Error Syndrome (ERRSYND) |
| * 15: 2 reserved |
| * 1 Multiple Bit Error Status (MERRSTS) |
| * 0 Correctable Error Status (CERRSTS) |
| */ |
| |
| #define IE31200_C0ECCERRLOG 0x40c8 |
| #define IE31200_C1ECCERRLOG 0x44c8 |
| #define IE31200_C0ECCERRLOG_SKL 0x4048 |
| #define IE31200_C1ECCERRLOG_SKL 0x4448 |
| #define IE31200_ECCERRLOG_CE BIT(0) |
| #define IE31200_ECCERRLOG_UE BIT(1) |
| #define IE31200_ECCERRLOG_RANK_BITS GENMASK_ULL(28, 27) |
| #define IE31200_ECCERRLOG_RANK_SHIFT 27 |
| #define IE31200_ECCERRLOG_SYNDROME_BITS GENMASK_ULL(23, 16) |
| #define IE31200_ECCERRLOG_SYNDROME_SHIFT 16 |
| |
| #define IE31200_ECCERRLOG_SYNDROME(log) \ |
| ((log & IE31200_ECCERRLOG_SYNDROME_BITS) >> \ |
| IE31200_ECCERRLOG_SYNDROME_SHIFT) |
| |
| #define IE31200_CAPID0 0xe4 |
| #define IE31200_CAPID0_PDCD BIT(4) |
| #define IE31200_CAPID0_DDPCD BIT(6) |
| #define IE31200_CAPID0_ECC BIT(1) |
| |
| #define IE31200_MAD_DIMM_0_OFFSET 0x5004 |
| #define IE31200_MAD_DIMM_0_OFFSET_SKL 0x500C |
| #define IE31200_MAD_DIMM_SIZE GENMASK_ULL(7, 0) |
| #define IE31200_MAD_DIMM_A_RANK BIT(17) |
| #define IE31200_MAD_DIMM_A_RANK_SHIFT 17 |
| #define IE31200_MAD_DIMM_A_RANK_SKL BIT(10) |
| #define IE31200_MAD_DIMM_A_RANK_SKL_SHIFT 10 |
| #define IE31200_MAD_DIMM_A_WIDTH BIT(19) |
| #define IE31200_MAD_DIMM_A_WIDTH_SHIFT 19 |
| #define IE31200_MAD_DIMM_A_WIDTH_SKL GENMASK_ULL(9, 8) |
| #define IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT 8 |
| |
| /* Skylake reports 1GB increments, everything else is 256MB */ |
| #define IE31200_PAGES(n, skl) \ |
| (n << (28 + (2 * skl) - PAGE_SHIFT)) |
| |
| static int nr_channels; |
| static struct pci_dev *mci_pdev; |
| static int ie31200_registered = 1; |
| |
| struct ie31200_priv { |
| void __iomem *window; |
| void __iomem *c0errlog; |
| void __iomem *c1errlog; |
| }; |
| |
| enum ie31200_chips { |
| IE31200 = 0, |
| }; |
| |
| struct ie31200_dev_info { |
| const char *ctl_name; |
| }; |
| |
| struct ie31200_error_info { |
| u16 errsts; |
| u16 errsts2; |
| u64 eccerrlog[IE31200_CHANNELS]; |
| }; |
| |
| static const struct ie31200_dev_info ie31200_devs[] = { |
| [IE31200] = { |
| .ctl_name = "IE31200" |
| }, |
| }; |
| |
| struct dimm_data { |
| u8 size; /* in multiples of 256MB, except Skylake is 1GB */ |
| u8 dual_rank : 1, |
| x16_width : 2; /* 0 means x8 width */ |
| }; |
| |
| static int how_many_channels(struct pci_dev *pdev) |
| { |
| int n_channels; |
| unsigned char capid0_2b; /* 2nd byte of CAPID0 */ |
| |
| pci_read_config_byte(pdev, IE31200_CAPID0 + 1, &capid0_2b); |
| |
| /* check PDCD: Dual Channel Disable */ |
| if (capid0_2b & IE31200_CAPID0_PDCD) { |
| edac_dbg(0, "In single channel mode\n"); |
| n_channels = 1; |
| } else { |
| edac_dbg(0, "In dual channel mode\n"); |
| n_channels = 2; |
| } |
| |
| /* check DDPCD - check if both channels are filled */ |
| if (capid0_2b & IE31200_CAPID0_DDPCD) |
| edac_dbg(0, "2 DIMMS per channel disabled\n"); |
| else |
| edac_dbg(0, "2 DIMMS per channel enabled\n"); |
| |
| return n_channels; |
| } |
| |
| static bool ecc_capable(struct pci_dev *pdev) |
| { |
| unsigned char capid0_4b; /* 4th byte of CAPID0 */ |
| |
| pci_read_config_byte(pdev, IE31200_CAPID0 + 3, &capid0_4b); |
| if (capid0_4b & IE31200_CAPID0_ECC) |
| return false; |
| return true; |
| } |
| |
| static int eccerrlog_row(u64 log) |
| { |
| return ((log & IE31200_ECCERRLOG_RANK_BITS) >> |
| IE31200_ECCERRLOG_RANK_SHIFT); |
| } |
| |
| static void ie31200_clear_error_info(struct mem_ctl_info *mci) |
| { |
| /* |
| * Clear any error bits. |
| * (Yes, we really clear bits by writing 1 to them.) |
| */ |
| pci_write_bits16(to_pci_dev(mci->pdev), IE31200_ERRSTS, |
| IE31200_ERRSTS_BITS, IE31200_ERRSTS_BITS); |
| } |
| |
| static void ie31200_get_and_clear_error_info(struct mem_ctl_info *mci, |
| struct ie31200_error_info *info) |
| { |
| struct pci_dev *pdev; |
| struct ie31200_priv *priv = mci->pvt_info; |
| |
| pdev = to_pci_dev(mci->pdev); |
| |
| /* |
| * This is a mess because there is no atomic way to read all the |
| * registers at once and the registers can transition from CE being |
| * overwritten by UE. |
| */ |
| pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts); |
| if (!(info->errsts & IE31200_ERRSTS_BITS)) |
| return; |
| |
| info->eccerrlog[0] = lo_hi_readq(priv->c0errlog); |
| if (nr_channels == 2) |
| info->eccerrlog[1] = lo_hi_readq(priv->c1errlog); |
| |
| pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts2); |
| |
| /* |
| * If the error is the same for both reads then the first set |
| * of reads is valid. If there is a change then there is a CE |
| * with no info and the second set of reads is valid and |
| * should be UE info. |
| */ |
| if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) { |
| info->eccerrlog[0] = lo_hi_readq(priv->c0errlog); |
| if (nr_channels == 2) |
| info->eccerrlog[1] = |
| lo_hi_readq(priv->c1errlog); |
| } |
| |
| ie31200_clear_error_info(mci); |
| } |
| |
| static void ie31200_process_error_info(struct mem_ctl_info *mci, |
| struct ie31200_error_info *info) |
| { |
| int channel; |
| u64 log; |
| |
| if (!(info->errsts & IE31200_ERRSTS_BITS)) |
| return; |
| |
| if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) { |
| edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, |
| -1, -1, -1, "UE overwrote CE", ""); |
| info->errsts = info->errsts2; |
| } |
| |
| for (channel = 0; channel < nr_channels; channel++) { |
| log = info->eccerrlog[channel]; |
| if (log & IE31200_ECCERRLOG_UE) { |
| edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, |
| 0, 0, 0, |
| eccerrlog_row(log), |
| channel, -1, |
| "ie31200 UE", ""); |
| } else if (log & IE31200_ECCERRLOG_CE) { |
| edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, |
| 0, 0, |
| IE31200_ECCERRLOG_SYNDROME(log), |
| eccerrlog_row(log), |
| channel, -1, |
| "ie31200 CE", ""); |
| } |
| } |
| } |
| |
| static void ie31200_check(struct mem_ctl_info *mci) |
| { |
| struct ie31200_error_info info; |
| |
| edac_dbg(1, "MC%d\n", mci->mc_idx); |
| ie31200_get_and_clear_error_info(mci, &info); |
| ie31200_process_error_info(mci, &info); |
| } |
| |
| static void __iomem *ie31200_map_mchbar(struct pci_dev *pdev) |
| { |
| union { |
| u64 mchbar; |
| struct { |
| u32 mchbar_low; |
| u32 mchbar_high; |
| }; |
| } u; |
| void __iomem *window; |
| |
| pci_read_config_dword(pdev, IE31200_MCHBAR_LOW, &u.mchbar_low); |
| pci_read_config_dword(pdev, IE31200_MCHBAR_HIGH, &u.mchbar_high); |
| u.mchbar &= IE31200_MCHBAR_MASK; |
| |
| if (u.mchbar != (resource_size_t)u.mchbar) { |
| ie31200_printk(KERN_ERR, "mmio space beyond accessible range (0x%llx)\n", |
| (unsigned long long)u.mchbar); |
| return NULL; |
| } |
| |
| window = ioremap_nocache(u.mchbar, IE31200_MMR_WINDOW_SIZE); |
| if (!window) |
| ie31200_printk(KERN_ERR, "Cannot map mmio space at 0x%llx\n", |
| (unsigned long long)u.mchbar); |
| |
| return window; |
| } |
| |
| static void __skl_populate_dimm_info(struct dimm_data *dd, u32 addr_decode, |
| int chan) |
| { |
| dd->size = (addr_decode >> (chan << 4)) & IE31200_MAD_DIMM_SIZE; |
| dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK_SKL << (chan << 4))) ? 1 : 0; |
| dd->x16_width = ((addr_decode & (IE31200_MAD_DIMM_A_WIDTH_SKL << (chan << 4))) >> |
| (IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT + (chan << 4))); |
| } |
| |
| static void __populate_dimm_info(struct dimm_data *dd, u32 addr_decode, |
| int chan) |
| { |
| dd->size = (addr_decode >> (chan << 3)) & IE31200_MAD_DIMM_SIZE; |
| dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK << chan)) ? 1 : 0; |
| dd->x16_width = (addr_decode & (IE31200_MAD_DIMM_A_WIDTH << chan)) ? 1 : 0; |
| } |
| |
| static void populate_dimm_info(struct dimm_data *dd, u32 addr_decode, int chan, |
| bool skl) |
| { |
| if (skl) |
| __skl_populate_dimm_info(dd, addr_decode, chan); |
| else |
| __populate_dimm_info(dd, addr_decode, chan); |
| } |
| |
| |
| static int ie31200_probe1(struct pci_dev *pdev, int dev_idx) |
| { |
| int i, j, ret; |
| struct mem_ctl_info *mci = NULL; |
| struct edac_mc_layer layers[2]; |
| struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL]; |
| void __iomem *window; |
| struct ie31200_priv *priv; |
| u32 addr_decode, mad_offset; |
| bool skl = (pdev->device == PCI_DEVICE_ID_INTEL_IE31200_HB_8); |
| |
| edac_dbg(0, "MC:\n"); |
| |
| if (!ecc_capable(pdev)) { |
| ie31200_printk(KERN_INFO, "No ECC support\n"); |
| return -ENODEV; |
| } |
| |
| nr_channels = how_many_channels(pdev); |
| layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; |
| layers[0].size = IE31200_DIMMS; |
| layers[0].is_virt_csrow = true; |
| layers[1].type = EDAC_MC_LAYER_CHANNEL; |
| layers[1].size = nr_channels; |
| layers[1].is_virt_csrow = false; |
| mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, |
| sizeof(struct ie31200_priv)); |
| if (!mci) |
| return -ENOMEM; |
| |
| window = ie31200_map_mchbar(pdev); |
| if (!window) { |
| ret = -ENODEV; |
| goto fail_free; |
| } |
| |
| edac_dbg(3, "MC: init mci\n"); |
| mci->pdev = &pdev->dev; |
| if (skl) |
| mci->mtype_cap = MEM_FLAG_DDR4; |
| else |
| mci->mtype_cap = MEM_FLAG_DDR3; |
| mci->edac_ctl_cap = EDAC_FLAG_SECDED; |
| mci->edac_cap = EDAC_FLAG_SECDED; |
| mci->mod_name = EDAC_MOD_STR; |
| mci->mod_ver = IE31200_REVISION; |
| mci->ctl_name = ie31200_devs[dev_idx].ctl_name; |
| mci->dev_name = pci_name(pdev); |
| mci->edac_check = ie31200_check; |
| mci->ctl_page_to_phys = NULL; |
| priv = mci->pvt_info; |
| priv->window = window; |
| if (skl) { |
| priv->c0errlog = window + IE31200_C0ECCERRLOG_SKL; |
| priv->c1errlog = window + IE31200_C1ECCERRLOG_SKL; |
| mad_offset = IE31200_MAD_DIMM_0_OFFSET_SKL; |
| } else { |
| priv->c0errlog = window + IE31200_C0ECCERRLOG; |
| priv->c1errlog = window + IE31200_C1ECCERRLOG; |
| mad_offset = IE31200_MAD_DIMM_0_OFFSET; |
| } |
| |
| /* populate DIMM info */ |
| for (i = 0; i < IE31200_CHANNELS; i++) { |
| addr_decode = readl(window + mad_offset + |
| (i * 4)); |
| edac_dbg(0, "addr_decode: 0x%x\n", addr_decode); |
| for (j = 0; j < IE31200_DIMMS_PER_CHANNEL; j++) { |
| populate_dimm_info(&dimm_info[i][j], addr_decode, j, |
| skl); |
| edac_dbg(0, "size: 0x%x, rank: %d, width: %d\n", |
| dimm_info[i][j].size, |
| dimm_info[i][j].dual_rank, |
| dimm_info[i][j].x16_width); |
| } |
| } |
| |
| /* |
| * The dram rank boundary (DRB) reg values are boundary addresses |
| * for each DRAM rank with a granularity of 64MB. DRB regs are |
| * cumulative; the last one will contain the total memory |
| * contained in all ranks. |
| */ |
| for (i = 0; i < IE31200_DIMMS_PER_CHANNEL; i++) { |
| for (j = 0; j < IE31200_CHANNELS; j++) { |
| struct dimm_info *dimm; |
| unsigned long nr_pages; |
| |
| nr_pages = IE31200_PAGES(dimm_info[j][i].size, skl); |
| if (nr_pages == 0) |
| continue; |
| |
| if (dimm_info[j][i].dual_rank) { |
| nr_pages = nr_pages / 2; |
| dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, |
| mci->n_layers, (i * 2) + 1, |
| j, 0); |
| dimm->nr_pages = nr_pages; |
| edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages); |
| dimm->grain = 8; /* just a guess */ |
| if (skl) |
| dimm->mtype = MEM_DDR4; |
| else |
| dimm->mtype = MEM_DDR3; |
| dimm->dtype = DEV_UNKNOWN; |
| dimm->edac_mode = EDAC_UNKNOWN; |
| } |
| dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, |
| mci->n_layers, i * 2, j, 0); |
| dimm->nr_pages = nr_pages; |
| edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages); |
| dimm->grain = 8; /* same guess */ |
| if (skl) |
| dimm->mtype = MEM_DDR4; |
| else |
| dimm->mtype = MEM_DDR3; |
| dimm->dtype = DEV_UNKNOWN; |
| dimm->edac_mode = EDAC_UNKNOWN; |
| } |
| } |
| |
| ie31200_clear_error_info(mci); |
| |
| if (edac_mc_add_mc(mci)) { |
| edac_dbg(3, "MC: failed edac_mc_add_mc()\n"); |
| ret = -ENODEV; |
| goto fail_unmap; |
| } |
| |
| /* get this far and it's successful */ |
| edac_dbg(3, "MC: success\n"); |
| return 0; |
| |
| fail_unmap: |
| iounmap(window); |
| |
| fail_free: |
| edac_mc_free(mci); |
| |
| return ret; |
| } |
| |
| static int ie31200_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int rc; |
| |
| edac_dbg(0, "MC:\n"); |
| if (pci_enable_device(pdev) < 0) |
| return -EIO; |
| rc = ie31200_probe1(pdev, ent->driver_data); |
| if (rc == 0 && !mci_pdev) |
| mci_pdev = pci_dev_get(pdev); |
| |
| return rc; |
| } |
| |
| static void ie31200_remove_one(struct pci_dev *pdev) |
| { |
| struct mem_ctl_info *mci; |
| struct ie31200_priv *priv; |
| |
| edac_dbg(0, "\n"); |
| pci_dev_put(mci_pdev); |
| mci_pdev = NULL; |
| mci = edac_mc_del_mc(&pdev->dev); |
| if (!mci) |
| return; |
| priv = mci->pvt_info; |
| iounmap(priv->window); |
| edac_mc_free(mci); |
| } |
| |
| static const struct pci_device_id ie31200_pci_tbl[] = { |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| PCI_VEND_DEV(INTEL, IE31200_HB_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| IE31200}, |
| { |
| 0, |
| } /* 0 terminated list. */ |
| }; |
| MODULE_DEVICE_TABLE(pci, ie31200_pci_tbl); |
| |
| static struct pci_driver ie31200_driver = { |
| .name = EDAC_MOD_STR, |
| .probe = ie31200_init_one, |
| .remove = ie31200_remove_one, |
| .id_table = ie31200_pci_tbl, |
| }; |
| |
| static int __init ie31200_init(void) |
| { |
| int pci_rc, i; |
| |
| edac_dbg(3, "MC:\n"); |
| /* Ensure that the OPSTATE is set correctly for POLL or NMI */ |
| opstate_init(); |
| |
| pci_rc = pci_register_driver(&ie31200_driver); |
| if (pci_rc < 0) |
| goto fail0; |
| |
| if (!mci_pdev) { |
| ie31200_registered = 0; |
| for (i = 0; ie31200_pci_tbl[i].vendor != 0; i++) { |
| mci_pdev = pci_get_device(ie31200_pci_tbl[i].vendor, |
| ie31200_pci_tbl[i].device, |
| NULL); |
| if (mci_pdev) |
| break; |
| } |
| if (!mci_pdev) { |
| edac_dbg(0, "ie31200 pci_get_device fail\n"); |
| pci_rc = -ENODEV; |
| goto fail1; |
| } |
| pci_rc = ie31200_init_one(mci_pdev, &ie31200_pci_tbl[i]); |
| if (pci_rc < 0) { |
| edac_dbg(0, "ie31200 init fail\n"); |
| pci_rc = -ENODEV; |
| goto fail1; |
| } |
| } |
| return 0; |
| |
| fail1: |
| pci_unregister_driver(&ie31200_driver); |
| fail0: |
| pci_dev_put(mci_pdev); |
| |
| return pci_rc; |
| } |
| |
| static void __exit ie31200_exit(void) |
| { |
| edac_dbg(3, "MC:\n"); |
| pci_unregister_driver(&ie31200_driver); |
| if (!ie31200_registered) |
| ie31200_remove_one(mci_pdev); |
| } |
| |
| module_init(ie31200_init); |
| module_exit(ie31200_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jason Baron <jbaron@akamai.com>"); |
| MODULE_DESCRIPTION("MC support for Intel Processor E31200 memory hub controllers"); |