| /* |
| * extcon-arizona.c - Extcon driver Wolfson Arizona devices |
| * |
| * Copyright (C) 2012-2014 Wolfson Microelectronics plc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/gpio.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/property.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/extcon.h> |
| |
| #include <sound/soc.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| #include <linux/mfd/arizona/pdata.h> |
| #include <linux/mfd/arizona/registers.h> |
| #include <dt-bindings/mfd/arizona.h> |
| |
| #define ARIZONA_MAX_MICD_RANGE 8 |
| |
| #define ARIZONA_MICD_CLAMP_MODE_JDL 0x4 |
| #define ARIZONA_MICD_CLAMP_MODE_JDH 0x5 |
| #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9 |
| #define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb |
| |
| #define ARIZONA_TST_CAP_DEFAULT 0x3 |
| #define ARIZONA_TST_CAP_CLAMP 0x1 |
| |
| #define ARIZONA_HPDET_MAX 10000 |
| |
| #define HPDET_DEBOUNCE 500 |
| #define DEFAULT_MICD_TIMEOUT 2000 |
| |
| #define QUICK_HEADPHONE_MAX_OHM 3 |
| #define MICROPHONE_MIN_OHM 1257 |
| #define MICROPHONE_MAX_OHM 30000 |
| |
| #define MICD_DBTIME_TWO_READINGS 2 |
| #define MICD_DBTIME_FOUR_READINGS 4 |
| |
| #define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \ |
| ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \ |
| ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \ |
| ARIZONA_MICD_LVL_7) |
| |
| #define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7) |
| |
| #define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8) |
| |
| struct arizona_extcon_info { |
| struct device *dev; |
| struct arizona *arizona; |
| struct mutex lock; |
| struct regulator *micvdd; |
| struct input_dev *input; |
| |
| u16 last_jackdet; |
| |
| int micd_mode; |
| const struct arizona_micd_config *micd_modes; |
| int micd_num_modes; |
| |
| const struct arizona_micd_range *micd_ranges; |
| int num_micd_ranges; |
| |
| int micd_timeout; |
| |
| bool micd_reva; |
| bool micd_clamp; |
| |
| struct delayed_work hpdet_work; |
| struct delayed_work micd_detect_work; |
| struct delayed_work micd_timeout_work; |
| |
| bool hpdet_active; |
| bool hpdet_done; |
| bool hpdet_retried; |
| |
| int num_hpdet_res; |
| unsigned int hpdet_res[3]; |
| |
| bool mic; |
| bool detecting; |
| int jack_flips; |
| |
| int hpdet_ip_version; |
| |
| struct extcon_dev *edev; |
| |
| struct gpio_desc *micd_pol_gpio; |
| }; |
| |
| static const struct arizona_micd_config micd_default_modes[] = { |
| { ARIZONA_ACCDET_SRC, 1, 0 }, |
| { 0, 2, 1 }, |
| }; |
| |
| static const struct arizona_micd_range micd_default_ranges[] = { |
| { .max = 11, .key = BTN_0 }, |
| { .max = 28, .key = BTN_1 }, |
| { .max = 54, .key = BTN_2 }, |
| { .max = 100, .key = BTN_3 }, |
| { .max = 186, .key = BTN_4 }, |
| { .max = 430, .key = BTN_5 }, |
| }; |
| |
| /* The number of levels in arizona_micd_levels valid for button thresholds */ |
| #define ARIZONA_NUM_MICD_BUTTON_LEVELS 64 |
| |
| static const int arizona_micd_levels[] = { |
| 3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46, |
| 49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100, |
| 105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245, |
| 270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071, |
| 1257, 30000, |
| }; |
| |
| static const unsigned int arizona_cable[] = { |
| EXTCON_MECHANICAL, |
| EXTCON_JACK_MICROPHONE, |
| EXTCON_JACK_HEADPHONE, |
| EXTCON_JACK_LINE_OUT, |
| EXTCON_NONE, |
| }; |
| |
| static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info); |
| |
| static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info, |
| bool clamp) |
| { |
| struct arizona *arizona = info->arizona; |
| unsigned int mask = 0, val = 0; |
| unsigned int cap_sel = 0; |
| int ret; |
| |
| switch (arizona->type) { |
| case WM8998: |
| case WM1814: |
| mask = 0; |
| break; |
| case WM5110: |
| case WM8280: |
| mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR | |
| ARIZONA_HP1L_SHRTI; |
| if (clamp) { |
| val = ARIZONA_HP1L_SHRTO; |
| cap_sel = ARIZONA_TST_CAP_CLAMP; |
| } else { |
| val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI; |
| cap_sel = ARIZONA_TST_CAP_DEFAULT; |
| } |
| |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_HP_TEST_CTRL_1, |
| ARIZONA_HP1_TST_CAP_SEL_MASK, |
| cap_sel); |
| if (ret != 0) |
| dev_warn(arizona->dev, |
| "Failed to set TST_CAP_SEL: %d\n", ret); |
| break; |
| default: |
| mask = ARIZONA_RMV_SHRT_HP1L; |
| if (clamp) |
| val = ARIZONA_RMV_SHRT_HP1L; |
| break; |
| } |
| |
| snd_soc_dapm_mutex_lock(arizona->dapm); |
| |
| arizona->hpdet_clamp = clamp; |
| |
| /* Keep the HP output stages disabled while doing the clamp */ |
| if (clamp) { |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_OUTPUT_ENABLES_1, |
| ARIZONA_OUT1L_ENA | |
| ARIZONA_OUT1R_ENA, 0); |
| if (ret != 0) |
| dev_warn(arizona->dev, |
| "Failed to disable headphone outputs: %d\n", |
| ret); |
| } |
| |
| if (mask) { |
| ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L, |
| mask, val); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to do clamp: %d\n", |
| ret); |
| |
| ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R, |
| mask, val); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to do clamp: %d\n", |
| ret); |
| } |
| |
| /* Restore the desired state while not doing the clamp */ |
| if (!clamp) { |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_OUTPUT_ENABLES_1, |
| ARIZONA_OUT1L_ENA | |
| ARIZONA_OUT1R_ENA, arizona->hp_ena); |
| if (ret != 0) |
| dev_warn(arizona->dev, |
| "Failed to restore headphone outputs: %d\n", |
| ret); |
| } |
| |
| snd_soc_dapm_mutex_unlock(arizona->dapm); |
| } |
| |
| static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) |
| { |
| struct arizona *arizona = info->arizona; |
| |
| mode %= info->micd_num_modes; |
| |
| if (arizona->pdata.micd_pol_gpio > 0) |
| gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, |
| info->micd_modes[mode].gpio); |
| else |
| gpiod_set_value_cansleep(info->micd_pol_gpio, |
| info->micd_modes[mode].gpio); |
| |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_BIAS_SRC_MASK, |
| info->micd_modes[mode].bias << |
| ARIZONA_MICD_BIAS_SRC_SHIFT); |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); |
| |
| info->micd_mode = mode; |
| |
| dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); |
| } |
| |
| static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) |
| { |
| switch (info->micd_modes[0].bias) { |
| case 1: |
| return "MICBIAS1"; |
| case 2: |
| return "MICBIAS2"; |
| case 3: |
| return "MICBIAS3"; |
| default: |
| return "MICVDD"; |
| } |
| } |
| |
| static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| const char *widget = arizona_extcon_get_micbias(info); |
| struct snd_soc_dapm_context *dapm = arizona->dapm; |
| int ret; |
| |
| ret = snd_soc_dapm_force_enable_pin(dapm, widget); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to enable %s: %d\n", |
| widget, ret); |
| |
| snd_soc_dapm_sync(dapm); |
| |
| if (!arizona->pdata.micd_force_micbias) { |
| ret = snd_soc_dapm_disable_pin(arizona->dapm, widget); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to disable %s: %d\n", |
| widget, ret); |
| |
| snd_soc_dapm_sync(dapm); |
| } |
| } |
| |
| static void arizona_start_mic(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| bool change; |
| int ret; |
| unsigned int mode; |
| |
| /* Microphone detection can't use idle mode */ |
| pm_runtime_get(info->dev); |
| |
| if (info->detecting) { |
| ret = regulator_allow_bypass(info->micvdd, false); |
| if (ret != 0) { |
| dev_err(arizona->dev, |
| "Failed to regulate MICVDD: %d\n", |
| ret); |
| } |
| } |
| |
| ret = regulator_enable(info->micvdd); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", |
| ret); |
| } |
| |
| if (info->micd_reva) { |
| regmap_write(arizona->regmap, 0x80, 0x3); |
| regmap_write(arizona->regmap, 0x294, 0); |
| regmap_write(arizona->regmap, 0x80, 0x0); |
| } |
| |
| if (info->detecting && arizona->pdata.micd_software_compare) |
| mode = ARIZONA_ACCDET_MODE_ADC; |
| else |
| mode = ARIZONA_ACCDET_MODE_MIC; |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, mode); |
| |
| arizona_extcon_pulse_micbias(info); |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, |
| &change); |
| if (!change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_put_autosuspend(info->dev); |
| } |
| } |
| |
| static void arizona_stop_mic(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| const char *widget = arizona_extcon_get_micbias(info); |
| struct snd_soc_dapm_context *dapm = arizona->dapm; |
| bool change; |
| int ret; |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, 0, |
| &change); |
| |
| ret = snd_soc_dapm_disable_pin(dapm, widget); |
| if (ret != 0) |
| dev_warn(arizona->dev, |
| "Failed to disable %s: %d\n", |
| widget, ret); |
| |
| snd_soc_dapm_sync(dapm); |
| |
| if (info->micd_reva) { |
| regmap_write(arizona->regmap, 0x80, 0x3); |
| regmap_write(arizona->regmap, 0x294, 2); |
| regmap_write(arizona->regmap, 0x80, 0x0); |
| } |
| |
| ret = regulator_allow_bypass(info->micvdd, true); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", |
| ret); |
| } |
| |
| if (change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_mark_last_busy(info->dev); |
| pm_runtime_put_autosuspend(info->dev); |
| } |
| } |
| |
| static struct { |
| unsigned int threshold; |
| unsigned int factor_a; |
| unsigned int factor_b; |
| } arizona_hpdet_b_ranges[] = { |
| { 100, 5528, 362464 }, |
| { 169, 11084, 6186851 }, |
| { 169, 11065, 65460395 }, |
| }; |
| |
| #define ARIZONA_HPDET_B_RANGE_MAX 0x3fb |
| |
| static struct { |
| int min; |
| int max; |
| } arizona_hpdet_c_ranges[] = { |
| { 0, 30 }, |
| { 8, 100 }, |
| { 100, 1000 }, |
| { 1000, 10000 }, |
| }; |
| |
| static int arizona_hpdet_read(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| unsigned int val, range; |
| int ret; |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read HPDET status: %d\n", |
| ret); |
| return ret; |
| } |
| |
| switch (info->hpdet_ip_version) { |
| case 0: |
| if (!(val & ARIZONA_HP_DONE)) { |
| dev_err(arizona->dev, "HPDET did not complete: %x\n", |
| val); |
| return -EAGAIN; |
| } |
| |
| val &= ARIZONA_HP_LVL_MASK; |
| break; |
| |
| case 1: |
| if (!(val & ARIZONA_HP_DONE_B)) { |
| dev_err(arizona->dev, "HPDET did not complete: %x\n", |
| val); |
| return -EAGAIN; |
| } |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read HP value: %d\n", |
| ret); |
| return -EAGAIN; |
| } |
| |
| regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| &range); |
| range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) |
| >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; |
| |
| if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && |
| (val < arizona_hpdet_b_ranges[range].threshold || |
| val >= ARIZONA_HPDET_B_RANGE_MAX)) { |
| range++; |
| dev_dbg(arizona->dev, "Moving to HPDET range %d\n", |
| range); |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK, |
| range << |
| ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); |
| return -EAGAIN; |
| } |
| |
| /* If we go out of range report top of range */ |
| if (val < arizona_hpdet_b_ranges[range].threshold || |
| val >= ARIZONA_HPDET_B_RANGE_MAX) { |
| dev_dbg(arizona->dev, "Measurement out of range\n"); |
| return ARIZONA_HPDET_MAX; |
| } |
| |
| dev_dbg(arizona->dev, "HPDET read %d in range %d\n", |
| val, range); |
| |
| val = arizona_hpdet_b_ranges[range].factor_b |
| / ((val * 100) - |
| arizona_hpdet_b_ranges[range].factor_a); |
| break; |
| |
| case 2: |
| if (!(val & ARIZONA_HP_DONE_B)) { |
| dev_err(arizona->dev, "HPDET did not complete: %x\n", |
| val); |
| return -EAGAIN; |
| } |
| |
| val &= ARIZONA_HP_LVL_B_MASK; |
| /* Convert to ohms, the value is in 0.5 ohm increments */ |
| val /= 2; |
| |
| regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| &range); |
| range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) |
| >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; |
| |
| /* Skip up a range, or report? */ |
| if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && |
| (val >= arizona_hpdet_c_ranges[range].max)) { |
| range++; |
| dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", |
| arizona_hpdet_c_ranges[range].min, |
| arizona_hpdet_c_ranges[range].max); |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK, |
| range << |
| ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); |
| return -EAGAIN; |
| } |
| |
| if (range && (val < arizona_hpdet_c_ranges[range].min)) { |
| dev_dbg(arizona->dev, "Reporting range boundary %d\n", |
| arizona_hpdet_c_ranges[range].min); |
| val = arizona_hpdet_c_ranges[range].min; |
| } |
| break; |
| |
| default: |
| dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", |
| info->hpdet_ip_version); |
| return -EINVAL; |
| } |
| |
| dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); |
| return val; |
| } |
| |
| static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading, |
| bool *mic) |
| { |
| struct arizona *arizona = info->arizona; |
| int id_gpio = arizona->pdata.hpdet_id_gpio; |
| |
| /* |
| * If we're using HPDET for accessory identification we need |
| * to take multiple measurements, step through them in sequence. |
| */ |
| if (arizona->pdata.hpdet_acc_id) { |
| info->hpdet_res[info->num_hpdet_res++] = *reading; |
| |
| /* Only check the mic directly if we didn't already ID it */ |
| if (id_gpio && info->num_hpdet_res == 1) { |
| dev_dbg(arizona->dev, "Measuring mic\n"); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK | |
| ARIZONA_ACCDET_SRC, |
| ARIZONA_ACCDET_MODE_HPR | |
| info->micd_modes[0].src); |
| |
| gpio_set_value_cansleep(id_gpio, 1); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| return -EAGAIN; |
| } |
| |
| /* OK, got both. Now, compare... */ |
| dev_dbg(arizona->dev, "HPDET measured %d %d\n", |
| info->hpdet_res[0], info->hpdet_res[1]); |
| |
| /* Take the headphone impedance for the main report */ |
| *reading = info->hpdet_res[0]; |
| |
| /* Sometimes we get false readings due to slow insert */ |
| if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) { |
| dev_dbg(arizona->dev, "Retrying high impedance\n"); |
| info->num_hpdet_res = 0; |
| info->hpdet_retried = true; |
| arizona_start_hpdet_acc_id(info); |
| pm_runtime_put(info->dev); |
| return -EAGAIN; |
| } |
| |
| /* |
| * If we measure the mic as high impedance |
| */ |
| if (!id_gpio || info->hpdet_res[1] > 50) { |
| dev_dbg(arizona->dev, "Detected mic\n"); |
| *mic = true; |
| info->detecting = true; |
| } else { |
| dev_dbg(arizona->dev, "Detected headphone\n"); |
| } |
| |
| /* Make sure everything is reset back to the real polarity */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC, |
| info->micd_modes[0].src); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t arizona_hpdet_irq(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| int id_gpio = arizona->pdata.hpdet_id_gpio; |
| unsigned int report = EXTCON_JACK_HEADPHONE; |
| int ret, reading, state; |
| bool mic = false; |
| |
| mutex_lock(&info->lock); |
| |
| /* If we got a spurious IRQ for some reason then ignore it */ |
| if (!info->hpdet_active) { |
| dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); |
| mutex_unlock(&info->lock); |
| return IRQ_NONE; |
| } |
| |
| /* If the cable was removed while measuring ignore the result */ |
| state = extcon_get_state(info->edev, EXTCON_MECHANICAL); |
| if (state < 0) { |
| dev_err(arizona->dev, "Failed to check cable state: %d\n", state); |
| goto out; |
| } else if (!state) { |
| dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); |
| goto done; |
| } |
| |
| ret = arizona_hpdet_read(info); |
| if (ret == -EAGAIN) |
| goto out; |
| else if (ret < 0) |
| goto done; |
| reading = ret; |
| |
| /* Reset back to starting range */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, |
| 0); |
| |
| ret = arizona_hpdet_do_id(info, &reading, &mic); |
| if (ret == -EAGAIN) |
| goto out; |
| else if (ret < 0) |
| goto done; |
| |
| /* Report high impedence cables as line outputs */ |
| if (reading >= 5000) |
| report = EXTCON_JACK_LINE_OUT; |
| else |
| report = EXTCON_JACK_HEADPHONE; |
| |
| ret = extcon_set_state_sync(info->edev, report, true); |
| if (ret != 0) |
| dev_err(arizona->dev, "Failed to report HP/line: %d\n", |
| ret); |
| |
| done: |
| /* Reset back to starting range */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, |
| 0); |
| |
| arizona_extcon_hp_clamp(info, false); |
| |
| if (id_gpio) |
| gpio_set_value_cansleep(id_gpio, 0); |
| |
| /* Revert back to MICDET mode */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| /* If we have a mic then reenable MICDET */ |
| if (state && (mic || info->mic)) |
| arizona_start_mic(info); |
| |
| if (info->hpdet_active) { |
| pm_runtime_put_autosuspend(info->dev); |
| info->hpdet_active = false; |
| } |
| |
| /* Do not set hp_det done when the cable has been unplugged */ |
| if (state) |
| info->hpdet_done = true; |
| |
| out: |
| mutex_unlock(&info->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void arizona_identify_headphone(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| int ret; |
| |
| if (info->hpdet_done) |
| return; |
| |
| dev_dbg(arizona->dev, "Starting HPDET\n"); |
| |
| /* Make sure we keep the device enabled during the measurement */ |
| pm_runtime_get(info->dev); |
| |
| info->hpdet_active = true; |
| |
| if (info->mic) |
| arizona_stop_mic(info); |
| |
| arizona_extcon_hp_clamp(info, true); |
| |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, |
| arizona->pdata.hpdet_channel); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); |
| goto err; |
| } |
| |
| ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", |
| ret); |
| goto err; |
| } |
| |
| return; |
| |
| err: |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| /* Just report headphone */ |
| ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); |
| if (ret != 0) |
| dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); |
| |
| if (info->mic) |
| arizona_start_mic(info); |
| |
| info->hpdet_active = false; |
| } |
| |
| static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| int hp_reading = 32; |
| bool mic; |
| int ret; |
| |
| dev_dbg(arizona->dev, "Starting identification via HPDET\n"); |
| |
| /* Make sure we keep the device enabled during the measurement */ |
| pm_runtime_get_sync(info->dev); |
| |
| info->hpdet_active = true; |
| |
| arizona_extcon_hp_clamp(info, true); |
| |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, |
| info->micd_modes[0].src | |
| arizona->pdata.hpdet_channel); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); |
| goto err; |
| } |
| |
| if (arizona->pdata.hpdet_acc_id_line) { |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| if (ret != 0) { |
| dev_err(arizona->dev, |
| "Can't start HPDETL measurement: %d\n", |
| ret); |
| goto err; |
| } |
| } else { |
| arizona_hpdet_do_id(info, &hp_reading, &mic); |
| } |
| |
| return; |
| |
| err: |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| /* Just report headphone */ |
| ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); |
| if (ret != 0) |
| dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); |
| |
| info->hpdet_active = false; |
| } |
| |
| static void arizona_micd_timeout_work(struct work_struct *work) |
| { |
| struct arizona_extcon_info *info = container_of(work, |
| struct arizona_extcon_info, |
| micd_timeout_work.work); |
| |
| mutex_lock(&info->lock); |
| |
| dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n"); |
| |
| info->detecting = false; |
| |
| arizona_identify_headphone(info); |
| |
| arizona_stop_mic(info); |
| |
| mutex_unlock(&info->lock); |
| } |
| |
| static void arizona_micd_detect(struct work_struct *work) |
| { |
| struct arizona_extcon_info *info = container_of(work, |
| struct arizona_extcon_info, |
| micd_detect_work.work); |
| struct arizona *arizona = info->arizona; |
| unsigned int val = 0, lvl; |
| int ret, i, key; |
| |
| cancel_delayed_work_sync(&info->micd_timeout_work); |
| |
| mutex_lock(&info->lock); |
| |
| /* If the cable was removed while measuring ignore the result */ |
| ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); |
| if (ret < 0) { |
| dev_err(arizona->dev, "Failed to check cable state: %d\n", |
| ret); |
| mutex_unlock(&info->lock); |
| return; |
| } else if (!ret) { |
| dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n"); |
| mutex_unlock(&info->lock); |
| return; |
| } |
| |
| if (info->detecting && arizona->pdata.micd_software_compare) { |
| /* Must disable MICD before we read the ADCVAL */ |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, 0); |
| ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_4, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, |
| "Failed to read MICDET_ADCVAL: %d\n", |
| ret); |
| mutex_unlock(&info->lock); |
| return; |
| } |
| |
| dev_dbg(arizona->dev, "MICDET_ADCVAL: %x\n", val); |
| |
| val &= ARIZONA_MICDET_ADCVAL_MASK; |
| if (val < ARRAY_SIZE(arizona_micd_levels)) |
| val = arizona_micd_levels[val]; |
| else |
| val = INT_MAX; |
| |
| if (val <= QUICK_HEADPHONE_MAX_OHM) |
| val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_0; |
| else if (val <= MICROPHONE_MIN_OHM) |
| val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_1; |
| else if (val <= MICROPHONE_MAX_OHM) |
| val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_8; |
| else |
| val = ARIZONA_MICD_LVL_8; |
| } |
| |
| for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) { |
| ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, |
| "Failed to read MICDET: %d\n", ret); |
| mutex_unlock(&info->lock); |
| return; |
| } |
| |
| dev_dbg(arizona->dev, "MICDET: %x\n", val); |
| |
| if (!(val & ARIZONA_MICD_VALID)) { |
| dev_warn(arizona->dev, |
| "Microphone detection state invalid\n"); |
| mutex_unlock(&info->lock); |
| return; |
| } |
| } |
| |
| if (i == 10 && !(val & MICD_LVL_0_TO_8)) { |
| dev_err(arizona->dev, "Failed to get valid MICDET value\n"); |
| mutex_unlock(&info->lock); |
| return; |
| } |
| |
| /* Due to jack detect this should never happen */ |
| if (!(val & ARIZONA_MICD_STS)) { |
| dev_warn(arizona->dev, "Detected open circuit\n"); |
| info->mic = false; |
| arizona_stop_mic(info); |
| info->detecting = false; |
| arizona_identify_headphone(info); |
| goto handled; |
| } |
| |
| /* If we got a high impedence we should have a headset, report it. */ |
| if (info->detecting && (val & ARIZONA_MICD_LVL_8)) { |
| info->mic = true; |
| info->detecting = false; |
| |
| arizona_identify_headphone(info); |
| |
| ret = extcon_set_state_sync(info->edev, |
| EXTCON_JACK_MICROPHONE, true); |
| if (ret != 0) |
| dev_err(arizona->dev, "Headset report failed: %d\n", |
| ret); |
| |
| /* Don't need to regulate for button detection */ |
| ret = regulator_allow_bypass(info->micvdd, true); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", |
| ret); |
| } |
| |
| goto handled; |
| } |
| |
| /* If we detected a lower impedence during initial startup |
| * then we probably have the wrong polarity, flip it. Don't |
| * do this for the lowest impedences to speed up detection of |
| * plain headphones. If both polarities report a low |
| * impedence then give up and report headphones. |
| */ |
| if (info->detecting && (val & MICD_LVL_1_TO_7)) { |
| if (info->jack_flips >= info->micd_num_modes * 10) { |
| dev_dbg(arizona->dev, "Detected HP/line\n"); |
| |
| info->detecting = false; |
| |
| arizona_identify_headphone(info); |
| |
| arizona_stop_mic(info); |
| } else { |
| info->micd_mode++; |
| if (info->micd_mode == info->micd_num_modes) |
| info->micd_mode = 0; |
| arizona_extcon_set_mode(info, info->micd_mode); |
| |
| info->jack_flips++; |
| } |
| |
| goto handled; |
| } |
| |
| /* |
| * If we're still detecting and we detect a short then we've |
| * got a headphone. Otherwise it's a button press. |
| */ |
| if (val & MICD_LVL_0_TO_7) { |
| if (info->mic) { |
| dev_dbg(arizona->dev, "Mic button detected\n"); |
| |
| lvl = val & ARIZONA_MICD_LVL_MASK; |
| lvl >>= ARIZONA_MICD_LVL_SHIFT; |
| |
| for (i = 0; i < info->num_micd_ranges; i++) |
| input_report_key(info->input, |
| info->micd_ranges[i].key, 0); |
| |
| WARN_ON(!lvl); |
| WARN_ON(ffs(lvl) - 1 >= info->num_micd_ranges); |
| if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) { |
| key = info->micd_ranges[ffs(lvl) - 1].key; |
| input_report_key(info->input, key, 1); |
| input_sync(info->input); |
| } |
| |
| } else if (info->detecting) { |
| dev_dbg(arizona->dev, "Headphone detected\n"); |
| info->detecting = false; |
| arizona_stop_mic(info); |
| |
| arizona_identify_headphone(info); |
| } else { |
| dev_warn(arizona->dev, "Button with no mic: %x\n", |
| val); |
| } |
| } else { |
| dev_dbg(arizona->dev, "Mic button released\n"); |
| for (i = 0; i < info->num_micd_ranges; i++) |
| input_report_key(info->input, |
| info->micd_ranges[i].key, 0); |
| input_sync(info->input); |
| arizona_extcon_pulse_micbias(info); |
| } |
| |
| handled: |
| if (info->detecting) { |
| if (arizona->pdata.micd_software_compare) |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, |
| ARIZONA_MICD_ENA); |
| |
| queue_delayed_work(system_power_efficient_wq, |
| &info->micd_timeout_work, |
| msecs_to_jiffies(info->micd_timeout)); |
| } |
| |
| pm_runtime_mark_last_busy(info->dev); |
| mutex_unlock(&info->lock); |
| } |
| |
| static irqreturn_t arizona_micdet(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| int debounce = arizona->pdata.micd_detect_debounce; |
| |
| cancel_delayed_work_sync(&info->micd_detect_work); |
| cancel_delayed_work_sync(&info->micd_timeout_work); |
| |
| mutex_lock(&info->lock); |
| if (!info->detecting) |
| debounce = 0; |
| mutex_unlock(&info->lock); |
| |
| if (debounce) |
| queue_delayed_work(system_power_efficient_wq, |
| &info->micd_detect_work, |
| msecs_to_jiffies(debounce)); |
| else |
| arizona_micd_detect(&info->micd_detect_work.work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void arizona_hpdet_work(struct work_struct *work) |
| { |
| struct arizona_extcon_info *info = container_of(work, |
| struct arizona_extcon_info, |
| hpdet_work.work); |
| |
| mutex_lock(&info->lock); |
| arizona_start_hpdet_acc_id(info); |
| mutex_unlock(&info->lock); |
| } |
| |
| static irqreturn_t arizona_jackdet(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| unsigned int val, present, mask; |
| bool cancelled_hp, cancelled_mic; |
| int ret, i; |
| |
| cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work); |
| cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work); |
| |
| pm_runtime_get_sync(info->dev); |
| |
| mutex_lock(&info->lock); |
| |
| if (info->micd_clamp) { |
| mask = ARIZONA_MICD_CLAMP_STS; |
| present = 0; |
| } else { |
| mask = ARIZONA_JD1_STS; |
| if (arizona->pdata.jd_invert) |
| present = 0; |
| else |
| present = ARIZONA_JD1_STS; |
| } |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read jackdet status: %d\n", |
| ret); |
| mutex_unlock(&info->lock); |
| pm_runtime_put_autosuspend(info->dev); |
| return IRQ_NONE; |
| } |
| |
| val &= mask; |
| if (val == info->last_jackdet) { |
| dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n"); |
| if (cancelled_hp) |
| queue_delayed_work(system_power_efficient_wq, |
| &info->hpdet_work, |
| msecs_to_jiffies(HPDET_DEBOUNCE)); |
| |
| if (cancelled_mic) { |
| int micd_timeout = info->micd_timeout; |
| |
| queue_delayed_work(system_power_efficient_wq, |
| &info->micd_timeout_work, |
| msecs_to_jiffies(micd_timeout)); |
| } |
| |
| goto out; |
| } |
| info->last_jackdet = val; |
| |
| if (info->last_jackdet == present) { |
| dev_dbg(arizona->dev, "Detected jack\n"); |
| ret = extcon_set_state_sync(info->edev, |
| EXTCON_MECHANICAL, true); |
| |
| if (ret != 0) |
| dev_err(arizona->dev, "Mechanical report failed: %d\n", |
| ret); |
| |
| if (!arizona->pdata.hpdet_acc_id) { |
| info->detecting = true; |
| info->mic = false; |
| info->jack_flips = 0; |
| |
| arizona_start_mic(info); |
| } else { |
| queue_delayed_work(system_power_efficient_wq, |
| &info->hpdet_work, |
| msecs_to_jiffies(HPDET_DEBOUNCE)); |
| } |
| |
| if (info->micd_clamp || !arizona->pdata.jd_invert) |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_MICD_CLAMP_DB | |
| ARIZONA_JD1_DB, 0); |
| } else { |
| dev_dbg(arizona->dev, "Detected jack removal\n"); |
| |
| arizona_stop_mic(info); |
| |
| info->num_hpdet_res = 0; |
| for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) |
| info->hpdet_res[i] = 0; |
| info->mic = false; |
| info->hpdet_done = false; |
| info->hpdet_retried = false; |
| |
| for (i = 0; i < info->num_micd_ranges; i++) |
| input_report_key(info->input, |
| info->micd_ranges[i].key, 0); |
| input_sync(info->input); |
| |
| for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) { |
| ret = extcon_set_state_sync(info->edev, |
| arizona_cable[i], false); |
| if (ret != 0) |
| dev_err(arizona->dev, |
| "Removal report failed: %d\n", ret); |
| } |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, |
| ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); |
| } |
| |
| if (arizona->pdata.micd_timeout) |
| info->micd_timeout = arizona->pdata.micd_timeout; |
| else |
| info->micd_timeout = DEFAULT_MICD_TIMEOUT; |
| |
| out: |
| /* Clear trig_sts to make sure DCVDD is not forced up */ |
| regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, |
| ARIZONA_MICD_CLAMP_FALL_TRIG_STS | |
| ARIZONA_MICD_CLAMP_RISE_TRIG_STS | |
| ARIZONA_JD1_FALL_TRIG_STS | |
| ARIZONA_JD1_RISE_TRIG_STS); |
| |
| mutex_unlock(&info->lock); |
| |
| pm_runtime_mark_last_busy(info->dev); |
| pm_runtime_put_autosuspend(info->dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Map a level onto a slot in the register bank */ |
| static void arizona_micd_set_level(struct arizona *arizona, int index, |
| unsigned int level) |
| { |
| int reg; |
| unsigned int mask; |
| |
| reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2); |
| |
| if (!(index % 2)) { |
| mask = 0x3f00; |
| level <<= 8; |
| } else { |
| mask = 0x3f; |
| } |
| |
| /* Program the level itself */ |
| regmap_update_bits(arizona->regmap, reg, mask, level); |
| } |
| |
| static int arizona_extcon_get_micd_configs(struct device *dev, |
| struct arizona *arizona) |
| { |
| const char * const prop = "wlf,micd-configs"; |
| const int entries_per_config = 3; |
| struct arizona_micd_config *micd_configs; |
| int nconfs, ret; |
| int i, j; |
| u32 *vals; |
| |
| nconfs = device_property_read_u32_array(arizona->dev, prop, NULL, 0); |
| if (nconfs <= 0) |
| return 0; |
| |
| vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL); |
| if (!vals) |
| return -ENOMEM; |
| |
| ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs); |
| if (ret < 0) |
| goto out; |
| |
| nconfs /= entries_per_config; |
| |
| micd_configs = devm_kzalloc(dev, |
| nconfs * sizeof(struct arizona_micd_range), |
| GFP_KERNEL); |
| if (!micd_configs) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| for (i = 0, j = 0; i < nconfs; ++i) { |
| micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0; |
| micd_configs[i].bias = vals[j++]; |
| micd_configs[i].gpio = vals[j++]; |
| } |
| |
| arizona->pdata.micd_configs = micd_configs; |
| arizona->pdata.num_micd_configs = nconfs; |
| |
| out: |
| kfree(vals); |
| return ret; |
| } |
| |
| static int arizona_extcon_device_get_pdata(struct device *dev, |
| struct arizona *arizona) |
| { |
| struct arizona_pdata *pdata = &arizona->pdata; |
| unsigned int val = ARIZONA_ACCDET_MODE_HPL; |
| int ret; |
| |
| device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val); |
| switch (val) { |
| case ARIZONA_ACCDET_MODE_HPL: |
| case ARIZONA_ACCDET_MODE_HPR: |
| pdata->hpdet_channel = val; |
| break; |
| default: |
| dev_err(arizona->dev, |
| "Wrong wlf,hpdet-channel DT value %d\n", val); |
| pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL; |
| } |
| |
| device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce", |
| &pdata->micd_detect_debounce); |
| |
| device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time", |
| &pdata->micd_bias_start_time); |
| |
| device_property_read_u32(arizona->dev, "wlf,micd-rate", |
| &pdata->micd_rate); |
| |
| device_property_read_u32(arizona->dev, "wlf,micd-dbtime", |
| &pdata->micd_dbtime); |
| |
| device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms", |
| &pdata->micd_timeout); |
| |
| pdata->micd_force_micbias = device_property_read_bool(arizona->dev, |
| "wlf,micd-force-micbias"); |
| |
| pdata->micd_software_compare = device_property_read_bool(arizona->dev, |
| "wlf,micd-software-compare"); |
| |
| pdata->jd_invert = device_property_read_bool(arizona->dev, |
| "wlf,jd-invert"); |
| |
| device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); |
| |
| pdata->jd_gpio5 = device_property_read_bool(arizona->dev, |
| "wlf,use-jd2"); |
| pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, |
| "wlf,use-jd2-nopull"); |
| |
| ret = arizona_extcon_get_micd_configs(dev, arizona); |
| if (ret < 0) |
| dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret); |
| |
| return 0; |
| } |
| |
| static int arizona_extcon_probe(struct platform_device *pdev) |
| { |
| struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); |
| struct arizona_pdata *pdata = &arizona->pdata; |
| struct arizona_extcon_info *info; |
| unsigned int val; |
| unsigned int clamp_mode; |
| int jack_irq_fall, jack_irq_rise; |
| int ret, mode, i, j; |
| |
| if (!arizona->dapm || !arizona->dapm->card) |
| return -EPROBE_DEFER; |
| |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| if (!dev_get_platdata(arizona->dev)) |
| arizona_extcon_device_get_pdata(&pdev->dev, arizona); |
| |
| info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD"); |
| if (IS_ERR(info->micvdd)) { |
| ret = PTR_ERR(info->micvdd); |
| dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); |
| return ret; |
| } |
| |
| mutex_init(&info->lock); |
| info->arizona = arizona; |
| info->dev = &pdev->dev; |
| info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS); |
| INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); |
| INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect); |
| INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work); |
| platform_set_drvdata(pdev, info); |
| |
| switch (arizona->type) { |
| case WM5102: |
| switch (arizona->rev) { |
| case 0: |
| info->micd_reva = true; |
| break; |
| default: |
| info->micd_clamp = true; |
| info->hpdet_ip_version = 1; |
| break; |
| } |
| break; |
| case WM5110: |
| case WM8280: |
| switch (arizona->rev) { |
| case 0 ... 2: |
| break; |
| default: |
| info->micd_clamp = true; |
| info->hpdet_ip_version = 2; |
| break; |
| } |
| break; |
| case WM8998: |
| case WM1814: |
| info->micd_clamp = true; |
| info->hpdet_ip_version = 2; |
| break; |
| default: |
| break; |
| } |
| |
| info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable); |
| if (IS_ERR(info->edev)) { |
| dev_err(&pdev->dev, "failed to allocate extcon device\n"); |
| return -ENOMEM; |
| } |
| |
| ret = devm_extcon_dev_register(&pdev->dev, info->edev); |
| if (ret < 0) { |
| dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", |
| ret); |
| return ret; |
| } |
| |
| info->input = devm_input_allocate_device(&pdev->dev); |
| if (!info->input) { |
| dev_err(arizona->dev, "Can't allocate input dev\n"); |
| ret = -ENOMEM; |
| goto err_register; |
| } |
| |
| info->input->name = "Headset"; |
| info->input->phys = "arizona/extcon"; |
| |
| if (pdata->num_micd_configs) { |
| info->micd_modes = pdata->micd_configs; |
| info->micd_num_modes = pdata->num_micd_configs; |
| } else { |
| info->micd_modes = micd_default_modes; |
| info->micd_num_modes = ARRAY_SIZE(micd_default_modes); |
| } |
| |
| if (arizona->pdata.gpsw > 0) |
| regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1, |
| ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw); |
| |
| if (arizona->pdata.micd_pol_gpio > 0) { |
| if (info->micd_modes[0].gpio) |
| mode = GPIOF_OUT_INIT_HIGH; |
| else |
| mode = GPIOF_OUT_INIT_LOW; |
| |
| ret = devm_gpio_request_one(&pdev->dev, |
| arizona->pdata.micd_pol_gpio, |
| mode, |
| "MICD polarity"); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", |
| arizona->pdata.micd_pol_gpio, ret); |
| goto err_register; |
| } |
| } else { |
| if (info->micd_modes[0].gpio) |
| mode = GPIOD_OUT_HIGH; |
| else |
| mode = GPIOD_OUT_LOW; |
| |
| /* We can't use devm here because we need to do the get |
| * against the MFD device, as that is where the of_node |
| * will reside, but if we devm against that the GPIO |
| * will not be freed if the extcon driver is unloaded. |
| */ |
| info->micd_pol_gpio = gpiod_get_optional(arizona->dev, |
| "wlf,micd-pol", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(info->micd_pol_gpio)) { |
| ret = PTR_ERR(info->micd_pol_gpio); |
| dev_err(arizona->dev, |
| "Failed to get microphone polarity GPIO: %d\n", |
| ret); |
| goto err_register; |
| } |
| } |
| |
| if (arizona->pdata.hpdet_id_gpio > 0) { |
| ret = devm_gpio_request_one(&pdev->dev, |
| arizona->pdata.hpdet_id_gpio, |
| GPIOF_OUT_INIT_LOW, |
| "HPDET"); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", |
| arizona->pdata.hpdet_id_gpio, ret); |
| goto err_gpio; |
| } |
| } |
| |
| if (arizona->pdata.micd_bias_start_time) |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_BIAS_STARTTIME_MASK, |
| arizona->pdata.micd_bias_start_time |
| << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); |
| |
| if (arizona->pdata.micd_rate) |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_RATE_MASK, |
| arizona->pdata.micd_rate |
| << ARIZONA_MICD_RATE_SHIFT); |
| |
| switch (arizona->pdata.micd_dbtime) { |
| case MICD_DBTIME_FOUR_READINGS: |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_DBTIME_MASK, |
| ARIZONA_MICD_DBTIME); |
| break; |
| case MICD_DBTIME_TWO_READINGS: |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_DBTIME_MASK, 0); |
| break; |
| default: |
| break; |
| } |
| |
| BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) < |
| ARIZONA_NUM_MICD_BUTTON_LEVELS); |
| |
| if (arizona->pdata.num_micd_ranges) { |
| info->micd_ranges = pdata->micd_ranges; |
| info->num_micd_ranges = pdata->num_micd_ranges; |
| } else { |
| info->micd_ranges = micd_default_ranges; |
| info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges); |
| } |
| |
| if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) { |
| dev_err(arizona->dev, "Too many MICD ranges: %d\n", |
| arizona->pdata.num_micd_ranges); |
| } |
| |
| if (info->num_micd_ranges > 1) { |
| for (i = 1; i < info->num_micd_ranges; i++) { |
| if (info->micd_ranges[i - 1].max > |
| info->micd_ranges[i].max) { |
| dev_err(arizona->dev, |
| "MICD ranges must be sorted\n"); |
| ret = -EINVAL; |
| goto err_gpio; |
| } |
| } |
| } |
| |
| /* Disable all buttons by default */ |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, |
| ARIZONA_MICD_LVL_SEL_MASK, 0x81); |
| |
| /* Set up all the buttons the user specified */ |
| for (i = 0; i < info->num_micd_ranges; i++) { |
| for (j = 0; j < ARIZONA_NUM_MICD_BUTTON_LEVELS; j++) |
| if (arizona_micd_levels[j] >= info->micd_ranges[i].max) |
| break; |
| |
| if (j == ARIZONA_NUM_MICD_BUTTON_LEVELS) { |
| dev_err(arizona->dev, "Unsupported MICD level %d\n", |
| info->micd_ranges[i].max); |
| ret = -EINVAL; |
| goto err_gpio; |
| } |
| |
| dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n", |
| arizona_micd_levels[j], i); |
| |
| arizona_micd_set_level(arizona, i, j); |
| input_set_capability(info->input, EV_KEY, |
| info->micd_ranges[i].key); |
| |
| /* Enable reporting of that range */ |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, |
| 1 << i, 1 << i); |
| } |
| |
| /* Set all the remaining keys to a maximum */ |
| for (; i < ARIZONA_MAX_MICD_RANGE; i++) |
| arizona_micd_set_level(arizona, i, 0x3f); |
| |
| /* |
| * If we have a clamp use it, activating in conjunction with |
| * GPIO5 if that is connected for jack detect operation. |
| */ |
| if (info->micd_clamp) { |
| if (arizona->pdata.jd_gpio5) { |
| /* Put the GPIO into input mode with optional pull */ |
| val = 0xc101; |
| if (arizona->pdata.jd_gpio5_nopull) |
| val &= ~ARIZONA_GPN_PU; |
| |
| regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, |
| val); |
| |
| if (arizona->pdata.jd_invert) |
| clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H; |
| else |
| clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H; |
| } else { |
| if (arizona->pdata.jd_invert) |
| clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH; |
| else |
| clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL; |
| } |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_MICD_CLAMP_CONTROL, |
| ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_MICD_CLAMP_DB, |
| ARIZONA_MICD_CLAMP_DB); |
| } |
| |
| arizona_extcon_set_mode(info, 0); |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_idle(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| if (info->micd_clamp) { |
| jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; |
| jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; |
| } else { |
| jack_irq_rise = ARIZONA_IRQ_JD_RISE; |
| jack_irq_fall = ARIZONA_IRQ_JD_FALL; |
| } |
| |
| ret = arizona_request_irq(arizona, jack_irq_rise, |
| "JACKDET rise", arizona_jackdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", |
| ret); |
| goto err_gpio; |
| } |
| |
| ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", |
| ret); |
| goto err_rise; |
| } |
| |
| ret = arizona_request_irq(arizona, jack_irq_fall, |
| "JACKDET fall", arizona_jackdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); |
| goto err_rise_wake; |
| } |
| |
| ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", |
| ret); |
| goto err_fall; |
| } |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, |
| "MICDET", arizona_micdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); |
| goto err_fall_wake; |
| } |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, |
| "HPDET", arizona_hpdet_irq, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); |
| goto err_micdet; |
| } |
| |
| arizona_clk32k_enable(arizona); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_JD1_DB, ARIZONA_JD1_DB); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, |
| ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); |
| |
| ret = regulator_allow_bypass(info->micvdd, true); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", |
| ret); |
| |
| pm_runtime_put(&pdev->dev); |
| |
| ret = input_register_device(info->input); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register input device: %d\n", ret); |
| goto err_hpdet; |
| } |
| |
| return 0; |
| |
| err_hpdet: |
| arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); |
| err_micdet: |
| arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); |
| err_fall_wake: |
| arizona_set_irq_wake(arizona, jack_irq_fall, 0); |
| err_fall: |
| arizona_free_irq(arizona, jack_irq_fall, info); |
| err_rise_wake: |
| arizona_set_irq_wake(arizona, jack_irq_rise, 0); |
| err_rise: |
| arizona_free_irq(arizona, jack_irq_rise, info); |
| err_gpio: |
| gpiod_put(info->micd_pol_gpio); |
| err_register: |
| pm_runtime_disable(&pdev->dev); |
| return ret; |
| } |
| |
| static int arizona_extcon_remove(struct platform_device *pdev) |
| { |
| struct arizona_extcon_info *info = platform_get_drvdata(pdev); |
| struct arizona *arizona = info->arizona; |
| int jack_irq_rise, jack_irq_fall; |
| bool change; |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, 0, |
| &change); |
| |
| if (change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_put(info->dev); |
| } |
| |
| gpiod_put(info->micd_pol_gpio); |
| |
| pm_runtime_disable(&pdev->dev); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_MICD_CLAMP_CONTROL, |
| ARIZONA_MICD_CLAMP_MODE_MASK, 0); |
| |
| if (info->micd_clamp) { |
| jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; |
| jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; |
| } else { |
| jack_irq_rise = ARIZONA_IRQ_JD_RISE; |
| jack_irq_fall = ARIZONA_IRQ_JD_FALL; |
| } |
| |
| arizona_set_irq_wake(arizona, jack_irq_rise, 0); |
| arizona_set_irq_wake(arizona, jack_irq_fall, 0); |
| arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); |
| arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); |
| arizona_free_irq(arizona, jack_irq_rise, info); |
| arizona_free_irq(arizona, jack_irq_fall, info); |
| cancel_delayed_work_sync(&info->hpdet_work); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, |
| ARIZONA_JD1_ENA, 0); |
| arizona_clk32k_disable(arizona); |
| |
| return 0; |
| } |
| |
| static struct platform_driver arizona_extcon_driver = { |
| .driver = { |
| .name = "arizona-extcon", |
| }, |
| .probe = arizona_extcon_probe, |
| .remove = arizona_extcon_remove, |
| }; |
| |
| module_platform_driver(arizona_extcon_driver); |
| |
| MODULE_DESCRIPTION("Arizona Extcon driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:extcon-arizona"); |