services/surfaceflinger/Scheduler/LayerInfo.h - SHIFTPHONES/android_frameworks_native - Gitiles

 /*
  * Copyright 2020 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #pragma once

 #include <ui/Transform.h>
 #include <utils/Timers.h>

 #include <chrono>
 #include <deque>

 #include "LayerHistory.h"
 #include "RefreshRateConfigs.h"
 #include "Scheduler/Seamlessness.h"
 #include "SchedulerUtils.h"

 namespace android {

 class Layer;

 namespace scheduler {

 using namespace std::chrono_literals;

 // Maximum period between presents for a layer to be considered active.
 constexpr std::chrono::nanoseconds MAX_ACTIVE_LAYER_PERIOD_NS = 1200ms;

 // Earliest present time for a layer to be considered active.
 constexpr nsecs_t getActiveLayerThreshold(nsecs_t now) {
     return now - MAX_ACTIVE_LAYER_PERIOD_NS.count();
 }

 // Stores history of present times and refresh rates for a layer.
 class LayerInfo {
     using LayerUpdateType = LayerHistory::LayerUpdateType;

     // Layer is considered frequent if the earliest value in the window of most recent present times
     // is within a threshold. If a layer is infrequent, its average refresh rate is disregarded in
     // favor of a low refresh rate.
     static constexpr size_t kFrequentLayerWindowSize = 3;
     static constexpr Fps kMinFpsForFrequentLayer{10.0f};
     static constexpr auto kMaxPeriodForFrequentLayerNs =
             std::chrono::nanoseconds(kMinFpsForFrequentLayer.getPeriodNsecs()) + 1ms;

     friend class LayerHistoryTest;
     friend class LayerInfoTest;

 public:
     // Holds information about the layer vote
     struct LayerVote {
         LayerHistory::LayerVoteType type = LayerHistory::LayerVoteType::Heuristic;
         Fps fps{0.0f};
         Seamlessness seamlessness = Seamlessness::Default;
     };

     // FrameRateCompatibility specifies how we should interpret the frame rate associated with
     // the layer.
     enum class FrameRateCompatibility {
         Default, // Layer didn't specify any specific handling strategy

         Exact, // Layer needs the exact frame rate.

         ExactOrMultiple, // Layer needs the exact frame rate (or a multiple of it) to present the
                          // content properly. Any other value will result in a pull down.

         NoVote, // Layer doesn't have any requirements for the refresh rate and
                 // should not be considered when the display refresh rate is determined.
     };

     // Encapsulates the frame rate and compatibility of the layer. This information will be used
     // when the display refresh rate is determined.
     struct FrameRate {
         using Seamlessness = scheduler::Seamlessness;

         Fps rate;
         FrameRateCompatibility type;
         Seamlessness seamlessness;

         FrameRate()
               : rate(0),
                 type(FrameRateCompatibility::Default),
                 seamlessness(Seamlessness::Default) {}
         FrameRate(Fps rate, FrameRateCompatibility type,
                   Seamlessness seamlessness = Seamlessness::OnlySeamless)
               : rate(rate), type(type), seamlessness(getSeamlessness(rate, seamlessness)) {}

         bool operator==(const FrameRate& other) const {
             return rate.equalsWithMargin(other.rate) && type == other.type &&
                     seamlessness == other.seamlessness;
         }

         bool operator!=(const FrameRate& other) const { return !(*this == other); }

         // Convert an ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_* value to a
         // Layer::FrameRateCompatibility. Logs fatal if the compatibility value is invalid.
         static FrameRateCompatibility convertCompatibility(int8_t compatibility);
         static scheduler::Seamlessness convertChangeFrameRateStrategy(int8_t strategy);

     private:
         static Seamlessness getSeamlessness(Fps rate, Seamlessness seamlessness) {
             if (!rate.isValid()) {
                 // Refresh rate of 0 is a special value which should reset the vote to
                 // its default value.
                 return Seamlessness::Default;
             }
             return seamlessness;
         }
     };

     static void setTraceEnabled(bool enabled) { sTraceEnabled = enabled; }

     LayerInfo(const std::string& name, uid_t ownerUid, LayerHistory::LayerVoteType defaultVote);

     LayerInfo(const LayerInfo&) = delete;
     LayerInfo& operator=(const LayerInfo&) = delete;

     struct LayerProps {
         bool visible = false;
         FloatRect bounds;
         ui::Transform transform;
         FrameRate setFrameRateVote;
         int32_t frameRateSelectionPriority = -1;
     };

     // Records the last requested present time. It also stores information about when
     // the layer was last updated. If the present time is farther in the future than the
     // updated time, the updated time is the present time.
     void setLastPresentTime(nsecs_t lastPresentTime, nsecs_t now, LayerUpdateType updateType,
                             bool pendingModeChange, LayerProps props);

     // Sets an explicit layer vote. This usually comes directly from the application via
     // ANativeWindow_setFrameRate API
     void setLayerVote(LayerVote vote) { mLayerVote = vote; }

     // Sets the default layer vote. This will be the layer vote after calling to resetLayerVote().
     // This is used for layers that called to setLayerVote() and then removed the vote, so that the
     // layer can go back to whatever vote it had before the app voted for it.
     void setDefaultLayerVote(LayerHistory::LayerVoteType type) { mDefaultVote = type; }

     // Resets the layer vote to its default.
     void resetLayerVote() { mLayerVote = {mDefaultVote, Fps(0.0f), Seamlessness::Default}; }

     std::string getName() const { return mName; }

     uid_t getOwnerUid() const { return mOwnerUid; }

     LayerVote getRefreshRateVote(const RefreshRateConfigs&, nsecs_t now);

     // Return the last updated time. If the present time is farther in the future than the
     // updated time, the updated time is the present time.
     nsecs_t getLastUpdatedTime() const { return mLastUpdatedTime; }

     FrameRate getSetFrameRateVote() const { return mLayerProps.setFrameRateVote; }
     bool isVisible() const { return mLayerProps.visible; }
     int32_t getFrameRateSelectionPriority() const { return mLayerProps.frameRateSelectionPriority; }

     FloatRect getBounds() const { return mLayerProps.bounds; }

     ui::Transform getTransform() const { return mLayerProps.transform; }

     // Returns a C string for tracing a vote
     const char* getTraceTag(LayerHistory::LayerVoteType type) const;

     void onLayerInactive(nsecs_t now) {
         // Mark mFrameTimeValidSince to now to ignore all previous frame times.
         // We are not deleting the old frame to keep track of whether we should treat the first
         // buffer as Max as we don't know anything about this layer or Min as this layer is
         // posting infrequent updates.
         const auto timePoint = std::chrono::nanoseconds(now);
         mFrameTimeValidSince = std::chrono::time_point<std::chrono::steady_clock>(timePoint);
         mLastRefreshRate = {};
         mRefreshRateHistory.clear();
     }

     void clearHistory(nsecs_t now) {
         onLayerInactive(now);
         mFrameTimes.clear();
     }

 private:
     // Used to store the layer timestamps
     struct FrameTimeData {
         nsecs_t presentTime; // desiredPresentTime, if provided
         nsecs_t queueTime;  // buffer queue time
         bool pendingModeChange;
     };

     // Holds information about the calculated and reported refresh rate
     struct RefreshRateHeuristicData {
         // Rate calculated on the layer
         Fps calculated{0.0f};
         // Last reported rate for LayerInfo::getRefreshRate()
         Fps reported{0.0f};
         // Whether the last reported rate for LayerInfo::getRefreshRate()
         // was due to animation or infrequent updates
         bool animatingOrInfrequent = false;
     };

     // Class to store past calculated refresh rate and determine whether
     // the refresh rate calculated is consistent with past values
     class RefreshRateHistory {
     public:
         static constexpr auto HISTORY_SIZE = 90;
         static constexpr std::chrono::nanoseconds HISTORY_DURATION = 2s;

         RefreshRateHistory(const std::string& name) : mName(name) {}

         // Clears History
         void clear();

         // Adds a new refresh rate and returns true if it is consistent
         bool add(Fps refreshRate, nsecs_t now);

     private:
         friend class LayerHistoryTest;

         // Holds the refresh rate when it was calculated
         struct RefreshRateData {
             Fps refreshRate{0.0f};
             nsecs_t timestamp = 0;

             bool operator<(const RefreshRateData& other) const {
                 // We don't need comparison with margins since we are using
                 // this to find the min and max refresh rates.
                 return refreshRate.getValue() < other.refreshRate.getValue();
             }
         };

         // Holds tracing strings
         struct HeuristicTraceTagData {
             std::string min;
             std::string max;
             std::string consistent;
             std::string average;
         };

         bool isConsistent() const;
         HeuristicTraceTagData makeHeuristicTraceTagData() const;

         const std::string mName;
         mutable std::optional<HeuristicTraceTagData> mHeuristicTraceTagData;
         std::deque<RefreshRateData> mRefreshRates;
         static constexpr float MARGIN_CONSISTENT_FPS = 1.0;
     };

     bool isFrequent(nsecs_t now) const;
     bool isAnimating(nsecs_t now) const;
     bool hasEnoughDataForHeuristic() const;
     std::optional<Fps> calculateRefreshRateIfPossible(const RefreshRateConfigs&, nsecs_t now);
     std::optional<nsecs_t> calculateAverageFrameTime() const;
     bool isFrameTimeValid(const FrameTimeData&) const;

     const std::string mName;
     const uid_t mOwnerUid;

     // Used for sanitizing the heuristic data. If two frames are less than
     // this period apart from each other they'll be considered as duplicates.
     static constexpr nsecs_t kMinPeriodBetweenFrames = Fps(240.f).getPeriodNsecs();
     // Used for sanitizing the heuristic data. If two frames are more than
     // this period apart from each other, the interval between them won't be
     // taken into account when calculating average frame rate.
     static constexpr nsecs_t kMaxPeriodBetweenFrames = kMinFpsForFrequentLayer.getPeriodNsecs();
     LayerHistory::LayerVoteType mDefaultVote;

     LayerVote mLayerVote;

     nsecs_t mLastUpdatedTime = 0;

     nsecs_t mLastAnimationTime = 0;

     RefreshRateHeuristicData mLastRefreshRate;

     std::deque<FrameTimeData> mFrameTimes;
     std::chrono::time_point<std::chrono::steady_clock> mFrameTimeValidSince =
             std::chrono::steady_clock::now();
     static constexpr size_t HISTORY_SIZE = RefreshRateHistory::HISTORY_SIZE;
     static constexpr std::chrono::nanoseconds HISTORY_DURATION = 1s;

     LayerProps mLayerProps;

     RefreshRateHistory mRefreshRateHistory;

     mutable std::unordered_map<LayerHistory::LayerVoteType, std::string> mTraceTags;

     // Shared for all LayerInfo instances
     static bool sTraceEnabled;
 };

 } // namespace scheduler
 } // namespace android
	/*
	* Copyright 2020 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#pragma once

	#include <ui/Transform.h>
	#include <utils/Timers.h>

	#include <chrono>
	#include <deque>

	#include "LayerHistory.h"
	#include "RefreshRateConfigs.h"
	#include "Scheduler/Seamlessness.h"
	#include "SchedulerUtils.h"

	namespace android {

	class Layer;

	namespace scheduler {

	using namespace std::chrono_literals;

	// Maximum period between presents for a layer to be considered active.
	constexpr std::chrono::nanoseconds MAX_ACTIVE_LAYER_PERIOD_NS = 1200ms;

	// Earliest present time for a layer to be considered active.
	constexpr nsecs_t getActiveLayerThreshold(nsecs_t now) {
	return now - MAX_ACTIVE_LAYER_PERIOD_NS.count();
	}

	// Stores history of present times and refresh rates for a layer.
	class LayerInfo {
	using LayerUpdateType = LayerHistory::LayerUpdateType;

	// Layer is considered frequent if the earliest value in the window of most recent present times
	// is within a threshold. If a layer is infrequent, its average refresh rate is disregarded in
	// favor of a low refresh rate.
	static constexpr size_t kFrequentLayerWindowSize = 3;
	static constexpr Fps kMinFpsForFrequentLayer{10.0f};
	static constexpr auto kMaxPeriodForFrequentLayerNs =
	std::chrono::nanoseconds(kMinFpsForFrequentLayer.getPeriodNsecs()) + 1ms;

	friend class LayerHistoryTest;
	friend class LayerInfoTest;

	public:
	// Holds information about the layer vote
	struct LayerVote {
	LayerHistory::LayerVoteType type = LayerHistory::LayerVoteType::Heuristic;
	Fps fps{0.0f};
	Seamlessness seamlessness = Seamlessness::Default;
	};

	// FrameRateCompatibility specifies how we should interpret the frame rate associated with
	// the layer.
	enum class FrameRateCompatibility {
	Default, // Layer didn't specify any specific handling strategy

	Exact, // Layer needs the exact frame rate.

	ExactOrMultiple, // Layer needs the exact frame rate (or a multiple of it) to present the
	// content properly. Any other value will result in a pull down.

	NoVote, // Layer doesn't have any requirements for the refresh rate and
	// should not be considered when the display refresh rate is determined.
	};

	// Encapsulates the frame rate and compatibility of the layer. This information will be used
	// when the display refresh rate is determined.
	struct FrameRate {
	using Seamlessness = scheduler::Seamlessness;

	Fps rate;
	FrameRateCompatibility type;
	Seamlessness seamlessness;

	FrameRate()
	: rate(0),
	type(FrameRateCompatibility::Default),
	seamlessness(Seamlessness::Default) {}
	FrameRate(Fps rate, FrameRateCompatibility type,
	Seamlessness seamlessness = Seamlessness::OnlySeamless)
	: rate(rate), type(type), seamlessness(getSeamlessness(rate, seamlessness)) {}

	bool operator==(const FrameRate& other) const {
	return rate.equalsWithMargin(other.rate) && type == other.type &&
	seamlessness == other.seamlessness;
	}

	bool operator!=(const FrameRate& other) const { return !(*this == other); }

	// Convert an ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_* value to a
	// Layer::FrameRateCompatibility. Logs fatal if the compatibility value is invalid.
	static FrameRateCompatibility convertCompatibility(int8_t compatibility);
	static scheduler::Seamlessness convertChangeFrameRateStrategy(int8_t strategy);

	private:
	static Seamlessness getSeamlessness(Fps rate, Seamlessness seamlessness) {
	if (!rate.isValid()) {
	// Refresh rate of 0 is a special value which should reset the vote to
	// its default value.
	return Seamlessness::Default;
	}
	return seamlessness;
	}
	};

	static void setTraceEnabled(bool enabled) { sTraceEnabled = enabled; }

	LayerInfo(const std::string& name, uid_t ownerUid, LayerHistory::LayerVoteType defaultVote);

	LayerInfo(const LayerInfo&) = delete;
	LayerInfo& operator=(const LayerInfo&) = delete;

	struct LayerProps {
	bool visible = false;
	FloatRect bounds;
	ui::Transform transform;
	FrameRate setFrameRateVote;
	int32_t frameRateSelectionPriority = -1;
	};

	// Records the last requested present time. It also stores information about when
	// the layer was last updated. If the present time is farther in the future than the
	// updated time, the updated time is the present time.
	void setLastPresentTime(nsecs_t lastPresentTime, nsecs_t now, LayerUpdateType updateType,
	bool pendingModeChange, LayerProps props);

	// Sets an explicit layer vote. This usually comes directly from the application via
	// ANativeWindow_setFrameRate API
	void setLayerVote(LayerVote vote) { mLayerVote = vote; }

	// Sets the default layer vote. This will be the layer vote after calling to resetLayerVote().
	// This is used for layers that called to setLayerVote() and then removed the vote, so that the
	// layer can go back to whatever vote it had before the app voted for it.
	void setDefaultLayerVote(LayerHistory::LayerVoteType type) { mDefaultVote = type; }

	// Resets the layer vote to its default.
	void resetLayerVote() { mLayerVote = {mDefaultVote, Fps(0.0f), Seamlessness::Default}; }

	std::string getName() const { return mName; }

	uid_t getOwnerUid() const { return mOwnerUid; }

	LayerVote getRefreshRateVote(const RefreshRateConfigs&, nsecs_t now);

	// Return the last updated time. If the present time is farther in the future than the
	// updated time, the updated time is the present time.
	nsecs_t getLastUpdatedTime() const { return mLastUpdatedTime; }

	FrameRate getSetFrameRateVote() const { return mLayerProps.setFrameRateVote; }
	bool isVisible() const { return mLayerProps.visible; }
	int32_t getFrameRateSelectionPriority() const { return mLayerProps.frameRateSelectionPriority; }

	FloatRect getBounds() const { return mLayerProps.bounds; }

	ui::Transform getTransform() const { return mLayerProps.transform; }

	// Returns a C string for tracing a vote
	const char* getTraceTag(LayerHistory::LayerVoteType type) const;

	void onLayerInactive(nsecs_t now) {
	// Mark mFrameTimeValidSince to now to ignore all previous frame times.
	// We are not deleting the old frame to keep track of whether we should treat the first
	// buffer as Max as we don't know anything about this layer or Min as this layer is
	// posting infrequent updates.
	const auto timePoint = std::chrono::nanoseconds(now);
	mFrameTimeValidSince = std::chrono::time_point<std::chrono::steady_clock>(timePoint);
	mLastRefreshRate = {};
	mRefreshRateHistory.clear();
	}

	void clearHistory(nsecs_t now) {
	onLayerInactive(now);
	mFrameTimes.clear();
	}

	private:
	// Used to store the layer timestamps
	struct FrameTimeData {
	nsecs_t presentTime; // desiredPresentTime, if provided
	nsecs_t queueTime; // buffer queue time
	bool pendingModeChange;
	};

	// Holds information about the calculated and reported refresh rate
	struct RefreshRateHeuristicData {
	// Rate calculated on the layer
	Fps calculated{0.0f};
	// Last reported rate for LayerInfo::getRefreshRate()
	Fps reported{0.0f};
	// Whether the last reported rate for LayerInfo::getRefreshRate()
	// was due to animation or infrequent updates
	bool animatingOrInfrequent = false;
	};

	// Class to store past calculated refresh rate and determine whether
	// the refresh rate calculated is consistent with past values
	class RefreshRateHistory {
	public:
	static constexpr auto HISTORY_SIZE = 90;
	static constexpr std::chrono::nanoseconds HISTORY_DURATION = 2s;

	RefreshRateHistory(const std::string& name) : mName(name) {}

	// Clears History
	void clear();

	// Adds a new refresh rate and returns true if it is consistent
	bool add(Fps refreshRate, nsecs_t now);

	private:
	friend class LayerHistoryTest;

	// Holds the refresh rate when it was calculated
	struct RefreshRateData {
	Fps refreshRate{0.0f};
	nsecs_t timestamp = 0;

	bool operator<(const RefreshRateData& other) const {
	// We don't need comparison with margins since we are using
	// this to find the min and max refresh rates.
	return refreshRate.getValue() < other.refreshRate.getValue();
	}
	};

	// Holds tracing strings
	struct HeuristicTraceTagData {
	std::string min;
	std::string max;
	std::string consistent;
	std::string average;
	};

	bool isConsistent() const;
	HeuristicTraceTagData makeHeuristicTraceTagData() const;

	const std::string mName;
	mutable std::optional<HeuristicTraceTagData> mHeuristicTraceTagData;
	std::deque<RefreshRateData> mRefreshRates;
	static constexpr float MARGIN_CONSISTENT_FPS = 1.0;
	};

	bool isFrequent(nsecs_t now) const;
	bool isAnimating(nsecs_t now) const;
	bool hasEnoughDataForHeuristic() const;
	std::optional<Fps> calculateRefreshRateIfPossible(const RefreshRateConfigs&, nsecs_t now);
	std::optional<nsecs_t> calculateAverageFrameTime() const;
	bool isFrameTimeValid(const FrameTimeData&) const;

	const std::string mName;
	const uid_t mOwnerUid;

	// Used for sanitizing the heuristic data. If two frames are less than
	// this period apart from each other they'll be considered as duplicates.
	static constexpr nsecs_t kMinPeriodBetweenFrames = Fps(240.f).getPeriodNsecs();
	// Used for sanitizing the heuristic data. If two frames are more than
	// this period apart from each other, the interval between them won't be
	// taken into account when calculating average frame rate.
	static constexpr nsecs_t kMaxPeriodBetweenFrames = kMinFpsForFrequentLayer.getPeriodNsecs();
	LayerHistory::LayerVoteType mDefaultVote;

	LayerVote mLayerVote;

	nsecs_t mLastUpdatedTime = 0;

	nsecs_t mLastAnimationTime = 0;

	RefreshRateHeuristicData mLastRefreshRate;

	std::deque<FrameTimeData> mFrameTimes;
	std::chrono::time_point<std::chrono::steady_clock> mFrameTimeValidSince =
	std::chrono::steady_clock::now();
	static constexpr size_t HISTORY_SIZE = RefreshRateHistory::HISTORY_SIZE;
	static constexpr std::chrono::nanoseconds HISTORY_DURATION = 1s;

	LayerProps mLayerProps;

	RefreshRateHistory mRefreshRateHistory;

	mutable std::unordered_map<LayerHistory::LayerVoteType, std::string> mTraceTags;

	// Shared for all LayerInfo instances
	static bool sTraceEnabled;
	};

	} // namespace scheduler
	} // namespace android