| /* |
| * Copyright 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "Gralloc3" |
| |
| #include <hidl/ServiceManagement.h> |
| #include <hwbinder/IPCThreadState.h> |
| #include <ui/Gralloc3.h> |
| |
| #include <inttypes.h> |
| #include <log/log.h> |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wzero-length-array" |
| #include <sync/sync.h> |
| #pragma clang diagnostic pop |
| |
| using android::hardware::graphics::allocator::V3_0::IAllocator; |
| using android::hardware::graphics::common::V1_2::BufferUsage; |
| using android::hardware::graphics::mapper::V3_0::BufferDescriptor; |
| using android::hardware::graphics::mapper::V3_0::Error; |
| using android::hardware::graphics::mapper::V3_0::IMapper; |
| using android::hardware::graphics::mapper::V3_0::YCbCrLayout; |
| |
| namespace android { |
| |
| namespace { |
| |
| static constexpr Error kTransactionError = Error::NO_RESOURCES; |
| |
| uint64_t getValidUsageBits() { |
| static const uint64_t validUsageBits = []() -> uint64_t { |
| uint64_t bits = 0; |
| for (const auto bit : |
| hardware::hidl_enum_range<hardware::graphics::common::V1_2::BufferUsage>()) { |
| bits = bits | bit; |
| } |
| |
| #ifdef ADDNL_GRALLOC_10_USAGE_BITS |
| uint64_t addnl_bits = static_cast<uint64_t>(ADDNL_GRALLOC_10_USAGE_BITS); |
| ALOGI("Adding additional valid usage bits: 0x%" PRIx64, addnl_bits); |
| bits = bits | addnl_bits; |
| #endif |
| |
| return bits; |
| }(); |
| return validUsageBits; |
| } |
| |
| static inline IMapper::Rect sGralloc3Rect(const Rect& rect) { |
| IMapper::Rect outRect{}; |
| outRect.left = rect.left; |
| outRect.top = rect.top; |
| outRect.width = rect.width(); |
| outRect.height = rect.height(); |
| return outRect; |
| } |
| static inline void sBufferDescriptorInfo(uint32_t width, uint32_t height, |
| android::PixelFormat format, uint32_t layerCount, |
| uint64_t usage, |
| IMapper::BufferDescriptorInfo* outDescriptorInfo) { |
| outDescriptorInfo->width = width; |
| outDescriptorInfo->height = height; |
| outDescriptorInfo->layerCount = layerCount; |
| outDescriptorInfo->format = static_cast<hardware::graphics::common::V1_2::PixelFormat>(format); |
| outDescriptorInfo->usage = usage; |
| } |
| |
| } // anonymous namespace |
| |
| void Gralloc3Mapper::preload() { |
| android::hardware::preloadPassthroughService<IMapper>(); |
| } |
| |
| Gralloc3Mapper::Gralloc3Mapper() { |
| mMapper = IMapper::getService(); |
| if (mMapper == nullptr) { |
| ALOGW("mapper 3.x is not supported"); |
| return; |
| } |
| if (mMapper->isRemote()) { |
| LOG_ALWAYS_FATAL("gralloc-mapper must be in passthrough mode"); |
| } |
| } |
| |
| bool Gralloc3Mapper::isLoaded() const { |
| return mMapper != nullptr; |
| } |
| |
| status_t Gralloc3Mapper::validateBufferDescriptorInfo( |
| IMapper::BufferDescriptorInfo* descriptorInfo) const { |
| uint64_t validUsageBits = getValidUsageBits(); |
| |
| if (descriptorInfo->usage & ~validUsageBits) { |
| ALOGE("buffer descriptor contains invalid usage bits 0x%" PRIx64, |
| descriptorInfo->usage & ~validUsageBits); |
| return BAD_VALUE; |
| } |
| |
| // Gralloc3 implementations never understand non-BLOB with GPU_DATA_BUFFER |
| // and do not reliably reject it. |
| if (descriptorInfo->usage & BufferUsage::GPU_DATA_BUFFER && |
| descriptorInfo->format != hardware::graphics::common::V1_2::PixelFormat::BLOB) { |
| ALOGE("gralloc3 does not support non-BLOB pixel formats with GPU_DATA_BUFFER usage"); |
| return BAD_VALUE; |
| } |
| |
| return NO_ERROR; |
| } |
| |
| status_t Gralloc3Mapper::createDescriptor(void* bufferDescriptorInfo, |
| void* outBufferDescriptor) const { |
| IMapper::BufferDescriptorInfo* descriptorInfo = |
| static_cast<IMapper::BufferDescriptorInfo*>(bufferDescriptorInfo); |
| BufferDescriptor* outDescriptor = static_cast<BufferDescriptor*>(outBufferDescriptor); |
| |
| status_t status = validateBufferDescriptorInfo(descriptorInfo); |
| if (status != NO_ERROR) { |
| return status; |
| } |
| |
| Error error; |
| auto hidl_cb = [&](const auto& tmpError, const auto& tmpDescriptor) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| *outDescriptor = tmpDescriptor; |
| }; |
| |
| hardware::Return<void> ret = mMapper->createDescriptor(*descriptorInfo, hidl_cb); |
| |
| return static_cast<status_t>((ret.isOk()) ? error : kTransactionError); |
| } |
| |
| status_t Gralloc3Mapper::importBuffer(const hardware::hidl_handle& rawHandle, |
| buffer_handle_t* outBufferHandle) const { |
| Error error; |
| auto ret = mMapper->importBuffer(rawHandle, [&](const auto& tmpError, const auto& tmpBuffer) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| *outBufferHandle = static_cast<buffer_handle_t>(tmpBuffer); |
| }); |
| |
| return static_cast<status_t>((ret.isOk()) ? error : kTransactionError); |
| } |
| |
| void Gralloc3Mapper::freeBuffer(buffer_handle_t bufferHandle) const { |
| auto buffer = const_cast<native_handle_t*>(bufferHandle); |
| auto ret = mMapper->freeBuffer(buffer); |
| |
| auto error = (ret.isOk()) ? static_cast<Error>(ret) : kTransactionError; |
| ALOGE_IF(error != Error::NONE, "freeBuffer(%p) failed with %d", buffer, error); |
| } |
| |
| status_t Gralloc3Mapper::validateBufferSize(buffer_handle_t bufferHandle, uint32_t width, |
| uint32_t height, android::PixelFormat format, |
| uint32_t layerCount, uint64_t usage, |
| uint32_t stride) const { |
| IMapper::BufferDescriptorInfo descriptorInfo; |
| sBufferDescriptorInfo(width, height, format, layerCount, usage, &descriptorInfo); |
| |
| auto buffer = const_cast<native_handle_t*>(bufferHandle); |
| auto ret = mMapper->validateBufferSize(buffer, descriptorInfo, stride); |
| |
| return static_cast<status_t>((ret.isOk()) ? static_cast<Error>(ret) : kTransactionError); |
| } |
| |
| void Gralloc3Mapper::getTransportSize(buffer_handle_t bufferHandle, uint32_t* outNumFds, |
| uint32_t* outNumInts) const { |
| *outNumFds = uint32_t(bufferHandle->numFds); |
| *outNumInts = uint32_t(bufferHandle->numInts); |
| |
| Error error; |
| auto buffer = const_cast<native_handle_t*>(bufferHandle); |
| auto ret = mMapper->getTransportSize(buffer, |
| [&](const auto& tmpError, const auto& tmpNumFds, |
| const auto& tmpNumInts) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| *outNumFds = tmpNumFds; |
| *outNumInts = tmpNumInts; |
| }); |
| |
| error = (ret.isOk()) ? error : kTransactionError; |
| |
| ALOGE_IF(error != Error::NONE, "getTransportSize(%p) failed with %d", buffer, error); |
| } |
| |
| status_t Gralloc3Mapper::lock(buffer_handle_t bufferHandle, uint64_t usage, const Rect& bounds, |
| int acquireFence, void** outData, int32_t* outBytesPerPixel, |
| int32_t* outBytesPerStride) const { |
| auto buffer = const_cast<native_handle_t*>(bufferHandle); |
| |
| IMapper::Rect accessRegion = sGralloc3Rect(bounds); |
| |
| // put acquireFence in a hidl_handle |
| hardware::hidl_handle acquireFenceHandle; |
| NATIVE_HANDLE_DECLARE_STORAGE(acquireFenceStorage, 1, 0); |
| if (acquireFence >= 0) { |
| auto h = native_handle_init(acquireFenceStorage, 1, 0); |
| h->data[0] = acquireFence; |
| acquireFenceHandle = h; |
| } |
| |
| Error error; |
| auto ret = mMapper->lock(buffer, usage, accessRegion, acquireFenceHandle, |
| [&](const auto& tmpError, const auto& tmpData, |
| const auto& tmpBytesPerPixel, const auto& tmpBytesPerStride) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| *outData = tmpData; |
| if (outBytesPerPixel) { |
| *outBytesPerPixel = tmpBytesPerPixel; |
| } |
| if (outBytesPerStride) { |
| *outBytesPerStride = tmpBytesPerStride; |
| } |
| }); |
| |
| // we own acquireFence even on errors |
| if (acquireFence >= 0) { |
| close(acquireFence); |
| } |
| |
| error = (ret.isOk()) ? error : kTransactionError; |
| |
| ALOGW_IF(error != Error::NONE, "lock(%p, ...) failed: %d", bufferHandle, error); |
| |
| return static_cast<status_t>(error); |
| } |
| |
| status_t Gralloc3Mapper::lock(buffer_handle_t bufferHandle, uint64_t usage, const Rect& bounds, |
| int acquireFence, android_ycbcr* ycbcr) const { |
| auto buffer = const_cast<native_handle_t*>(bufferHandle); |
| |
| IMapper::Rect accessRegion = sGralloc3Rect(bounds); |
| |
| // put acquireFence in a hidl_handle |
| hardware::hidl_handle acquireFenceHandle; |
| NATIVE_HANDLE_DECLARE_STORAGE(acquireFenceStorage, 1, 0); |
| if (acquireFence >= 0) { |
| auto h = native_handle_init(acquireFenceStorage, 1, 0); |
| h->data[0] = acquireFence; |
| acquireFenceHandle = h; |
| } |
| |
| YCbCrLayout layout; |
| Error error; |
| auto ret = mMapper->lockYCbCr(buffer, usage, accessRegion, acquireFenceHandle, |
| [&](const auto& tmpError, const auto& tmpLayout) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| |
| layout = tmpLayout; |
| }); |
| |
| if (error == Error::NONE) { |
| ycbcr->y = layout.y; |
| ycbcr->cb = layout.cb; |
| ycbcr->cr = layout.cr; |
| ycbcr->ystride = static_cast<size_t>(layout.yStride); |
| ycbcr->cstride = static_cast<size_t>(layout.cStride); |
| ycbcr->chroma_step = static_cast<size_t>(layout.chromaStep); |
| } |
| |
| // we own acquireFence even on errors |
| if (acquireFence >= 0) { |
| close(acquireFence); |
| } |
| |
| return static_cast<status_t>((ret.isOk()) ? error : kTransactionError); |
| } |
| |
| int Gralloc3Mapper::unlock(buffer_handle_t bufferHandle) const { |
| auto buffer = const_cast<native_handle_t*>(bufferHandle); |
| |
| int releaseFence = -1; |
| Error error; |
| auto ret = mMapper->unlock(buffer, [&](const auto& tmpError, const auto& tmpReleaseFence) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| |
| auto fenceHandle = tmpReleaseFence.getNativeHandle(); |
| if (fenceHandle && fenceHandle->numFds == 1) { |
| int fd = dup(fenceHandle->data[0]); |
| if (fd >= 0) { |
| releaseFence = fd; |
| } else { |
| ALOGD("failed to dup unlock release fence"); |
| sync_wait(fenceHandle->data[0], -1); |
| } |
| } |
| }); |
| |
| if (!ret.isOk()) { |
| error = kTransactionError; |
| } |
| |
| if (error != Error::NONE) { |
| ALOGE("unlock(%p) failed with %d", buffer, error); |
| } |
| |
| return releaseFence; |
| } |
| |
| status_t Gralloc3Mapper::isSupported(uint32_t width, uint32_t height, android::PixelFormat format, |
| uint32_t layerCount, uint64_t usage, |
| bool* outSupported) const { |
| IMapper::BufferDescriptorInfo descriptorInfo; |
| sBufferDescriptorInfo(width, height, format, layerCount, usage, &descriptorInfo); |
| |
| Error error; |
| auto ret = mMapper->isSupported(descriptorInfo, |
| [&](const auto& tmpError, const auto& tmpSupported) { |
| error = tmpError; |
| if (error != Error::NONE) { |
| return; |
| } |
| if (outSupported) { |
| *outSupported = tmpSupported; |
| } |
| }); |
| |
| if (!ret.isOk()) { |
| error = kTransactionError; |
| } |
| |
| if (error != Error::NONE) { |
| ALOGE("isSupported(%u, %u, %d, %u, ...) failed with %d", width, height, format, layerCount, |
| error); |
| } |
| |
| return static_cast<status_t>(error); |
| } |
| |
| Gralloc3Allocator::Gralloc3Allocator(const Gralloc3Mapper& mapper) : mMapper(mapper) { |
| mAllocator = IAllocator::getService(); |
| if (mAllocator == nullptr) { |
| ALOGW("allocator 3.x is not supported"); |
| return; |
| } |
| } |
| |
| bool Gralloc3Allocator::isLoaded() const { |
| return mAllocator != nullptr; |
| } |
| |
| std::string Gralloc3Allocator::dumpDebugInfo(bool /*less*/) const { |
| std::string debugInfo; |
| |
| mAllocator->dumpDebugInfo([&](const auto& tmpDebugInfo) { debugInfo = tmpDebugInfo.c_str(); }); |
| |
| return debugInfo; |
| } |
| |
| status_t Gralloc3Allocator::allocate(std::string /*requestorName*/, uint32_t width, uint32_t height, |
| android::PixelFormat format, uint32_t layerCount, |
| uint64_t usage, uint32_t bufferCount, uint32_t* outStride, |
| buffer_handle_t* outBufferHandles, bool importBuffers) const { |
| IMapper::BufferDescriptorInfo descriptorInfo; |
| sBufferDescriptorInfo(width, height, format, layerCount, usage, &descriptorInfo); |
| |
| BufferDescriptor descriptor; |
| status_t error = mMapper.createDescriptor(static_cast<void*>(&descriptorInfo), |
| static_cast<void*>(&descriptor)); |
| if (error != NO_ERROR) { |
| return error; |
| } |
| |
| auto ret = mAllocator->allocate(descriptor, bufferCount, |
| [&](const auto& tmpError, const auto& tmpStride, |
| const auto& tmpBuffers) { |
| error = static_cast<status_t>(tmpError); |
| if (tmpError != Error::NONE) { |
| return; |
| } |
| |
| if (importBuffers) { |
| for (uint32_t i = 0; i < bufferCount; i++) { |
| error = mMapper.importBuffer(tmpBuffers[i], |
| &outBufferHandles[i]); |
| if (error != NO_ERROR) { |
| for (uint32_t j = 0; j < i; j++) { |
| mMapper.freeBuffer(outBufferHandles[j]); |
| outBufferHandles[j] = nullptr; |
| } |
| return; |
| } |
| } |
| } else { |
| for (uint32_t i = 0; i < bufferCount; i++) { |
| outBufferHandles[i] = native_handle_clone( |
| tmpBuffers[i].getNativeHandle()); |
| if (!outBufferHandles[i]) { |
| for (uint32_t j = 0; j < i; j++) { |
| auto buffer = const_cast<native_handle_t*>( |
| outBufferHandles[j]); |
| native_handle_close(buffer); |
| native_handle_delete(buffer); |
| outBufferHandles[j] = nullptr; |
| } |
| } |
| } |
| } |
| *outStride = tmpStride; |
| }); |
| |
| // make sure the kernel driver sees BC_FREE_BUFFER and closes the fds now |
| hardware::IPCThreadState::self()->flushCommands(); |
| |
| return (ret.isOk()) ? error : static_cast<status_t>(kTransactionError); |
| } |
| |
| } // namespace android |