| #! /vendor/bin/sh |
| |
| # Copyright (c) 2012-2013,2016,2018-2021 The Linux Foundation. All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # * Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # * Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # * Neither the name of The Linux Foundation nor |
| # the names of its contributors may be used to endorse or promote |
| # products derived from this software without specific prior written |
| # permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| # NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
| # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| #Changes from Qualcomm Innovation Center are provided under the following license: |
| #Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| #SPDX-License-Identifier: BSD-3-Clause-Clear |
| # |
| |
| export PATH=/vendor/bin |
| |
| # Set platform variables |
| if [ -f /sys/devices/soc0/hw_platform ]; then |
| soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null |
| else |
| soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null |
| fi |
| if [ -f /sys/devices/soc0/soc_id ]; then |
| soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null |
| else |
| soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null |
| fi |
| if [ -f /sys/devices/soc0/platform_version ]; then |
| soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null |
| else |
| soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null |
| fi |
| |
| if [ -f /sys/class/drm/card0-DSI-1/modes ]; then |
| echo "detect" > /sys/class/drm/card0-DSI-1/status |
| mode_file=/sys/class/drm/card0-DSI-1/modes |
| while read line; do |
| fb_width=${line%%x*}; |
| break; |
| done < $mode_file |
| elif [ -f /sys/class/graphics/fb0/virtual_size ]; then |
| res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null |
| fb_width=${res%,*} |
| fi |
| |
| log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'" |
| |
| #For drm based display driver |
| vbfile=/sys/module/drm/parameters/vblankoffdelay |
| if [ -w $vbfile ]; then |
| echo -1 > $vbfile |
| else |
| log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist" |
| fi |
| |
| function set_density_by_fb() { |
| #put default density based on width |
| if [ -z $fb_width ]; then |
| setprop vendor.display.lcd_density 320 |
| else |
| if [ $fb_width -ge 1600 ]; then |
| setprop vendor.display.lcd_density 640 |
| elif [ $fb_width -ge 1440 ]; then |
| setprop vendor.display.lcd_density 560 |
| elif [ $fb_width -ge 1080 ]; then |
| setprop vendor.display.lcd_density 480 |
| elif [ $fb_width -ge 720 ]; then |
| setprop vendor.display.lcd_density 320 #for 720X1280 resolution |
| elif [ $fb_width -ge 480 ]; then |
| setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution |
| else |
| setprop vendor.display.lcd_density 160 |
| fi |
| fi |
| } |
| |
| target=`getprop ro.board.platform` |
| case "$target" in |
| "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") |
| case "$soc_hwplatform" in |
| "FFA" | "SVLTE_FFA") |
| # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that |
| # the UI keyboard works fine. |
| ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin |
| ;; |
| "Fluid") |
| setprop vendor.display.lcd_density 240 |
| setprop qcom.bt.dev_power_class 2 |
| ;; |
| *) |
| ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin |
| ;; |
| esac |
| ;; |
| "sm6150") |
| case "$soc_hwplatform" in |
| "ADP") |
| setprop vendor.display.lcd_density 160 |
| ;; |
| esac |
| case "$soc_hwid" in |
| 365|366) |
| sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null |
| setprop vendor.media.target.version 1 |
| if [ $sku_ver -eq 1 ]; then |
| setprop vendor.media.target.version 2 |
| fi |
| ;; |
| 355|369|377|384) |
| setprop vendor.chre.enabled 0 |
| ;; |
| *) |
| esac |
| ;; |
| "msm8660") |
| case "$soc_hwplatform" in |
| "Fluid") |
| setprop vendor.display.lcd_density 240 |
| ;; |
| "Dragon") |
| setprop ro.sound.alsa "WM8903" |
| ;; |
| esac |
| ;; |
| |
| "msm8960") |
| # lcd density is write-once. Hence the separate switch case |
| case "$soc_hwplatform" in |
| "Liquid") |
| if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku |
| setprop ro.sf.hwrotation 90 |
| fi |
| |
| setprop vendor.display.lcd_density 160 |
| ;; |
| "MTP") |
| setprop vendor.display.lcd_density 240 |
| ;; |
| *) |
| case "$soc_hwid" in |
| "109") |
| setprop vendor.display.lcd_density 160 |
| ;; |
| *) |
| setprop vendor.display.lcd_density 240 |
| ;; |
| esac |
| ;; |
| esac |
| |
| #Set up composition type based on the target |
| case "$soc_hwid" in |
| 87) |
| #8960 |
| setprop debug.composition.type dyn |
| ;; |
| 153|154|155|156|157|138) |
| #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB |
| setprop debug.composition.type c2d |
| ;; |
| *) |
| esac |
| ;; |
| |
| "msm8974") |
| case "$soc_hwplatform" in |
| "Liquid") |
| setprop vendor.display.lcd_density 160 |
| # Liquid do not have hardware navigation keys, so enable |
| # Android sw navigation bar |
| setprop ro.hw.nav_keys 0 |
| ;; |
| "Dragon") |
| setprop vendor.display.lcd_density 240 |
| ;; |
| *) |
| setprop vendor.display.lcd_density 320 |
| ;; |
| esac |
| ;; |
| |
| "msm8226") |
| case "$soc_hwplatform" in |
| *) |
| setprop vendor.display.lcd_density 320 |
| ;; |
| esac |
| ;; |
| |
| "msm8610" | "apq8084" | "mpq8092") |
| case "$soc_hwplatform" in |
| *) |
| setprop vendor.display.lcd_density 240 |
| ;; |
| esac |
| ;; |
| "apq8084") |
| case "$soc_hwplatform" in |
| "Liquid") |
| setprop vendor.display.lcd_density 320 |
| # Liquid do not have hardware navigation keys, so enable |
| # Android sw navigation bar |
| setprop ro.hw.nav_keys 0 |
| ;; |
| "SBC") |
| setprop vendor.display.lcd_density 200 |
| # SBC do not have hardware navigation keys, so enable |
| # Android sw navigation bar |
| setprop qemu.hw.mainkeys 0 |
| ;; |
| *) |
| setprop vendor.display.lcd_density 480 |
| ;; |
| esac |
| ;; |
| "msm8996") |
| case "$soc_hwplatform" in |
| "Dragon") |
| setprop vendor.display.lcd_density 240 |
| setprop qemu.hw.mainkeys 0 |
| ;; |
| "ADP") |
| setprop vendor.display.lcd_density 160 |
| setprop qemu.hw.mainkeys 0 |
| ;; |
| "SBC") |
| setprop vendor.display.lcd_density 240 |
| setprop qemu.hw.mainkeys 0 |
| ;; |
| *) |
| setprop vendor.display.lcd_density 560 |
| ;; |
| esac |
| ;; |
| "msm8937" | "msm8940") |
| # Set vendor.opengles.version based on chip id. |
| # MSM8937 and MSM8940 variants supports OpenGLES 3.1 |
| # 196608 is decimal for 0x30000 to report version 3.0 |
| # 196609 is decimal for 0x30001 to report version 3.1 |
| # 196610 is decimal for 0x30002 to report version 3.2 |
| case "$soc_hwid" in |
| 294|295|296|297|298|313|353|354|363|364) |
| # Disable adsprpcd_sensorspd daemon |
| setprop vendor.fastrpc.disable.adsprpcd_sensorspd.daemon 1 |
| |
| setprop vendor.opengles.version 196610 |
| if [ $soc_hwid = 354 ] |
| then |
| setprop vendor.media.target.version 1 |
| log -t BOOT -p i "SDM429 early_boot prop set for: HwID '$soc_hwid'" |
| fi |
| ;; |
| 303|307|308|309|320|386|436) |
| # Vulkan is not supported for 8917 variants |
| setprop vendor.opengles.version 196608 |
| setprop persist.graphics.vulkan.disable true |
| setprop vendor.gralloc.disable_ahardware_buffer 1 |
| # Disable adsprpcd_sensorspd daemon |
| setprop vendor.fastrpc.disable.adsprpcd_sensorspd.daemon 1 |
| ;; |
| *) |
| setprop vendor.opengles.version 196608 |
| ;; |
| esac |
| ;; |
| "msm8909") |
| case "$soc_hwplatform" in |
| *) |
| setprop persist.graphics.vulkan.disable true |
| ;; |
| esac |
| ;; |
| "msm8998" | "apq8098_latv") |
| case "$soc_hwplatform" in |
| *) |
| setprop vendor.display.lcd_density 560 |
| ;; |
| esac |
| ;; |
| "sdm845") |
| case "$soc_hwplatform" in |
| *) |
| if [ $fb_width -le 1600 ]; then |
| setprop vendor.display.lcd_density 560 |
| else |
| setprop vendor.display.lcd_density 640 |
| fi |
| ;; |
| esac |
| ;; |
| "msmnile") |
| case "$soc_hwplatform" in |
| *) |
| if [ $fb_width -le 1600 ]; then |
| setprop vendor.display.lcd_density 560 |
| else |
| setprop vendor.display.lcd_density 640 |
| fi |
| ;; |
| esac |
| ;; |
| "kona") |
| case "$soc_hwplatform" in |
| *) |
| setprop vendor.media.target_variant "_kona" |
| if [ $fb_width -le 1600 ]; then |
| setprop vendor.display.lcd_density 560 |
| else |
| setprop vendor.display.lcd_density 640 |
| fi |
| ;; |
| esac |
| ;; |
| "lito") |
| case "$soc_hwid" in |
| 400|440) |
| sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null |
| if [ $sku_ver -eq 1 ]; then |
| setprop vendor.media.target.version 1 |
| fi |
| ;; |
| 434|459) |
| sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null |
| setprop vendor.media.target.version 2 |
| if [ $sku_ver -eq 1 ]; then |
| setprop vendor.media.target.version 3 |
| fi |
| ;; |
| 476) |
| # Fraser soc_id 476 |
| setprop vendor.display.enable_qsync_idle 1 |
| ;; |
| esac |
| ;; |
| "bengal") |
| case "$soc_hwid" in |
| 441|473) |
| # 441 is for scuba and 473 for scuba iot qcm |
| setprop vendor.fastrpc.disable.cdsprpcd.daemon 1 |
| setprop vendor.media.target.version 2 |
| setprop vendor.gralloc.disable_ubwc 1 |
| setprop vendor.display.enhance_idle_time 1 |
| setprop vendor.netflix.bsp_rev "" |
| # 196609 is decimal for 0x30001 to report version 3.1 |
| setprop vendor.opengles.version 196609 |
| sku_ver=`cat /sys/devices/platform/soc/5a00000.qcom,vidc1/sku_version` 2> /dev/null |
| if [ $sku_ver -eq 1 ]; then |
| setprop vendor.media.target.version 3 |
| fi |
| ;; |
| 471|474) |
| # 471 is for scuba APQ and 474 for scuba iot qcs |
| setprop vendor.fastrpc.disable.cdsprpcd.daemon 1 |
| setprop vendor.gralloc.disable_ubwc 1 |
| setprop vendor.display.enhance_idle_time 1 |
| setprop vendor.netflix.bsp_rev "" |
| ;; |
| 518|561|586) |
| setprop vendor.media.target.version 3 |
| ;; |
| 585) |
| setprop vendor.media.target.version 4 |
| ;; |
| esac |
| ;; |
| "sdm710" | "msmpeafowl") |
| case "$soc_hwplatform" in |
| *) |
| if [ $fb_width -le 1600 ]; then |
| setprop vendor.display.lcd_density 560 |
| else |
| setprop vendor.display.lcd_density 640 |
| fi |
| |
| sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null |
| if [ $sku_ver -eq 1 ]; then |
| setprop vendor.media.target.version 1 |
| fi |
| ;; |
| esac |
| ;; |
| "msm8953") |
| cap_ver = 1 |
| if [ -e "/sys/devices/platform/soc/1d00000.qcom,vidc/capability_version" ]; then |
| cap_ver=`cat /sys/devices/platform/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null |
| else |
| cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null |
| fi |
| |
| if [ $cap_ver -eq 1 ]; then |
| setprop vendor.media.target.version 1 |
| fi |
| ;; |
| #Set property to differentiate SDM660 & SDM455 |
| #SOC ID for SDM455 is 385 |
| "sdm660") |
| case "$soc_hwplatform" in |
| *) |
| if [ $fb_width -le 1600 ]; then |
| setprop vendor.display.lcd_density 560 |
| else |
| setprop vendor.display.lcd_density 640 |
| fi |
| |
| if [ $soc_hwid -eq 385 ]; then |
| setprop vendor.media.target.version 1 |
| fi |
| ;; |
| esac |
| ;; |
| "holi") |
| setprop vendor.media.target_variant "_holi" |
| ;; |
| esac |
| case "$target" in |
| "msm8937") |
| case "$soc_hwid" in |
| 386|354|353|303|436) |
| # enable qrtr-ns service for kernel 4.14 or above |
| KernelVersionStr=`cat /proc/sys/kernel/osrelease` |
| KernelVersionS=${KernelVersionStr:2:2} |
| KernelVersionA=${KernelVersionStr:0:1} |
| KernelVersionB=${KernelVersionS%.*} |
| |
| if [ $KernelVersionA -ge 4 ] && [ $KernelVersionB -ge 14 ]; then |
| setprop init.svc.vendor.qrtrns.enable 1 |
| fi |
| ;; |
| esac |
| ;; |
| esac |
| |
| #set default lcd density |
| #Since lcd density has read only |
| #property, it will not overwrite previous set |
| #property if any target is setting forcefully. |
| set_density_by_fb |
| |
| |
| # set Lilliput LCD density for ADP |
| product=`getprop ro.build.product` |
| |
| case "$product" in |
| "msmnile_au") |
| setprop vendor.display.lcd_density 160 |
| echo 902400000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq |
| echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/max_freq |
| echo 902400000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq |
| echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/max_freq |
| ;; |
| *) |
| ;; |
| esac |
| case "$product" in |
| "sm6150_au") |
| setprop vendor.display.lcd_density 160 |
| ;; |
| *) |
| ;; |
| esac |
| case "$product" in |
| "sdmshrike_au") |
| setprop vendor.display.lcd_density 160 |
| ;; |
| *) |
| ;; |
| esac |
| |
| case "$product" in |
| "msmnile_gvmq") |
| setprop vendor.display.lcd_density 160 |
| ;; |
| *) |
| ;; |
| esac |
| |
| case "$product" in |
| "msmnile_gvmgh") |
| setprop vendor.display.lcd_density 160 |
| ;; |
| *) |
| ;; |
| esac |
| # Setup display nodes & permissions |
| # HDMI can be fb1 or fb2 |
| # Loop through the sysfs nodes and determine |
| # the HDMI(dtv panel) |
| |
| function set_perms() { |
| #Usage set_perms <filename> <ownership> <permission> |
| chown -h $2 $1 |
| chmod $3 $1 |
| } |
| |
| # check for the type of driver FB or DRM |
| fb_driver=/sys/class/graphics/fb0 |
| if [ -e "$fb_driver" ] |
| then |
| # check for mdp caps |
| file=/sys/class/graphics/fb0/mdp/caps |
| if [ -f "$file" ] |
| then |
| setprop vendor.gralloc.disable_ubwc 1 |
| cat $file | while read line; do |
| case "$line" in |
| *"ubwc"*) |
| setprop vendor.gralloc.enable_fb_ubwc 1 |
| setprop vendor.gralloc.disable_ubwc 0 |
| esac |
| done |
| fi |
| else |
| set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660 |
| fi |
| |
| # allow system_graphics group to access pmic secure_mode node |
| set_perms /sys/class/lcd_bias/secure_mode system.graphics 0660 |
| set_perms /sys/class/leds/wled/secure_mode system.graphics 0660 |
| |
| boot_reason=`cat /proc/sys/kernel/boot_reason` |
| reboot_reason=`getprop ro.boot.alarmboot` |
| if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then |
| setprop ro.vendor.alarm_boot true |
| else |
| setprop ro.vendor.alarm_boot false |
| fi |
| |
| # copy GPU frequencies to vendor property |
| if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then |
| gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null |
| setprop vendor.gpu.available_frequencies "$gpu_freq" |
| fi |