blob: 24bd7ba91c8e7cf2f4e4573776a73c54e473462c [file] [log] [blame]
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Copyright (c) 2016-2017, 2019, 2021, The Linux Foundation. All rights reserved
Not a Contribution.
-->
<!-- Copyright (C) 2015 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
<!-- version section contains a “version” tag in the form “major.minor” e.g version=”1.0” -->
<!-- Global configuration Decalaration -->
<globalConfiguration speaker_drc_enabled="true"/>
<!-- Modules section:
There is one section per audio HW module present on the platform.
Each module section will contains two mandatory tags for audio HAL “halVersion” and “name”.
The module names are the same as in current .conf file:
“primary”, “A2DP”, “remote_submix”, “USB”
Each module will contain the following sections:
“devicePorts”: a list of device descriptors for all input and output devices accessible via this
module.
This contains both permanently attached devices and removable devices.
“mixPorts”: listing all output and input streams exposed by the audio HAL
“routes”: list of possible connections between input and output devices or between stream and
devices.
"route": is defined by an attribute:
-"type": <mux|mix> means all sources are mutual exclusive (mux) or can be mixed (mix)
-"sink": the sink involved in this route
-"sources": all the sources than can be connected to the sink via vis route
“attachedDevices”: permanently attached devices.
The attachedDevices section is a list of devices names. The names correspond to device names
defined in <devicePorts> section.
“defaultOutputDevice”: device to be used by default when no policy rule applies
-->
<modules>
<module name="primary" halVersion="2.0">
<attachedDevices>
<item>Speaker</item>
<item>Speaker Safe</item>
<item>Earpiece</item>
<item>Telephony Tx</item>
<item>Built-In Mic</item>
<item>Built-In Back Mic</item>
<item>Telephony Rx</item>
</attachedDevices>
<defaultOutputDevice>Speaker</defaultOutputDevice>
<mixPorts>
<mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_PRIMARY|AUDIO_OUTPUT_FLAG_FAST">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_FAST">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="hifi_playback" role="source" />
<mixPort name="deep_buffer" role="source"
flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
<profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
samplingRates="44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="compressed_offload" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
<profile name="" format="AUDIO_FORMAT_MP3"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_LC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
</mixPort>
<mixPort name="voice_tx" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="mmap_no_irq_out" role="source" flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_MMAP_NOIRQ">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="voip_rx" role="source"
flags="AUDIO_OUTPUT_FLAG_VOIP_RX">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="incall_music_uplink" role="source"
flags="AUDIO_OUTPUT_FLAG_INCALL_MUSIC">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="primary input" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
</mixPort>
<mixPort name="fast input" role="sink" flags="AUDIO_INPUT_FLAG_FAST">
<profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
</mixPort>
<mixPort name="hifi_input" role="sink" />
<mixPort name="voice_rx" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
</mixPort>
<mixPort name="mmap_no_irq_in" role="sink" flags="AUDIO_INPUT_FLAG_MMAP_NOIRQ">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
</mixPort>
<mixPort name="voip_tx" role="sink"
flags="AUDIO_INPUT_FLAG_VOIP_TX">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</mixPort>
</mixPorts>
<devicePorts>
<devicePort tagName="Earpiece" type="AUDIO_DEVICE_OUT_EARPIECE" role="sink">
</devicePort>
<devicePort tagName="Speaker" type="AUDIO_DEVICE_OUT_SPEAKER" role="sink">
</devicePort>
<devicePort tagName="Speaker Safe" type="AUDIO_DEVICE_OUT_SPEAKER_SAFE" role="sink">
</devicePort>
<devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
</devicePort>
<devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
</devicePort>
<devicePort tagName="Line" type="AUDIO_DEVICE_OUT_LINE" role="sink">
</devicePort>
<devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
</devicePort>
<devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
</devicePort>
<devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
</devicePort>
<devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
</devicePort>
<devicePort tagName="USB Device Out" type="AUDIO_DEVICE_OUT_USB_DEVICE" role="sink">
</devicePort>
<devicePort tagName="USB Headset Out" type="AUDIO_DEVICE_OUT_USB_HEADSET" role="sink">
</devicePort>
<devicePort tagName="BT A2DP Out" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP" role="sink"
encodedFormats="AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_AAC AUDIO_FORMAT_SBC">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000,88200,96000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT A2DP Headphones" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES" role="sink"
encodedFormats="AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_AAC AUDIO_FORMAT_SBC">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000,88200,96000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT A2DP Speaker" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER" role="sink"
encodedFormats="AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_AAC AUDIO_FORMAT_SBC">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000,88200,96000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
</devicePort>
<devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
</devicePort>
<devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
</devicePort>
<devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
</devicePort>
<devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
</devicePort>
<!-- TODO: Enable multi-channel recording -->
<devicePort tagName="USB Device In" type="AUDIO_DEVICE_IN_USB_DEVICE" role="source">
</devicePort>
<devicePort tagName="USB Headset In" type="AUDIO_DEVICE_IN_USB_HEADSET" role="source">
</devicePort>
</devicePorts>
<routes>
<route type="mix" sink="Earpiece"
sources="primary output,raw,deep_buffer,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="Speaker"
sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="Speaker Safe"
sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="Wired Headset"
sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="Wired Headphones"
sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="Line"
sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="BT SCO"
sources="primary output,raw,deep_buffer,voip_rx"/>
<route type="mix" sink="BT SCO Headset"
sources="primary output,raw,deep_buffer,voip_rx"/>
<route type="mix" sink="BT SCO Car Kit"
sources="primary output,raw,deep_buffer,voip_rx"/>
<route type="mix" sink="USB Device Out"
sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="USB Headset Out"
sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
<route type="mix" sink="Telephony Tx"
sources="voice_tx,incall_music_uplink"/>
<route type="mix" sink="primary input"
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
<route type="mix" sink="fast input"
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
<route type="mix" sink="voice_rx"
sources="Telephony Rx"/>
<route type="mix" sink="hifi_input" sources="USB Device In,USB Headset In" />
<route type="mix" sink="mmap_no_irq_in"
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,USB Device In,USB Headset In"/>
<route type="mix" sink="voip_tx"
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
<route type="mix" sink="BT A2DP Out"
sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
<route type="mix" sink="BT A2DP Headphones"
sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
<route type="mix" sink="BT A2DP Speaker"
sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
</routes>
</module>
<!-- Usb Audio HAL -->
<module name="usb" halVersion="2.0">
<mixPorts>
<mixPort name="usb_accessory output" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
</mixPorts>
<devicePorts>
<devicePort tagName="USB Host Out" type="AUDIO_DEVICE_OUT_USB_ACCESSORY" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
</devicePorts>
<routes>
<route type="mix" sink="USB Host Out"
sources="usb_accessory output"/>
</routes>
</module>
<!-- Remote Submix Audio HAL -->
<xi:include href="r_submix_audio_policy_configuration.xml"/>
</modules>
<!-- End of Modules section -->
<!-- Volume section -->
<xi:include href="audio_policy_volumes.xml"/>
<xi:include href="default_volume_tables.xml"/>
<!-- End of Volume section -->
</audioPolicyConfiguration>