| // Copyright 2015 Google Inc. All rights reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| package android |
| |
| import ( |
| "reflect" |
| |
| "github.com/google/blueprint" |
| "github.com/google/blueprint/proptools" |
| ) |
| |
| type defaultsDependencyTag struct { |
| blueprint.BaseDependencyTag |
| } |
| |
| var DefaultsDepTag defaultsDependencyTag |
| |
| type defaultsProperties struct { |
| Defaults []string |
| } |
| |
| type DefaultableModuleBase struct { |
| defaultsProperties defaultsProperties |
| defaultableProperties []interface{} |
| defaultableVariableProperties interface{} |
| |
| // The optional hook to call after any defaults have been applied. |
| hook DefaultableHook |
| } |
| |
| func (d *DefaultableModuleBase) defaults() *defaultsProperties { |
| return &d.defaultsProperties |
| } |
| |
| func (d *DefaultableModuleBase) setProperties(props []interface{}, variableProperties interface{}) { |
| d.defaultableProperties = props |
| d.defaultableVariableProperties = variableProperties |
| } |
| |
| func (d *DefaultableModuleBase) SetDefaultableHook(hook DefaultableHook) { |
| d.hook = hook |
| } |
| |
| func (d *DefaultableModuleBase) callHookIfAvailable(ctx DefaultableHookContext) { |
| if d.hook != nil { |
| d.hook(ctx) |
| } |
| } |
| |
| // Interface that must be supported by any module to which defaults can be applied. |
| type Defaultable interface { |
| // Get a pointer to the struct containing the Defaults property. |
| defaults() *defaultsProperties |
| |
| // Set the property structures into which defaults will be added. |
| setProperties(props []interface{}, variableProperties interface{}) |
| |
| // Apply defaults from the supplied Defaults to the property structures supplied to |
| // setProperties(...). |
| applyDefaults(TopDownMutatorContext, []Defaults) |
| |
| // Set the hook to be called after any defaults have been applied. |
| // |
| // Should be used in preference to a AddLoadHook when the behavior of the load |
| // hook is dependent on properties supplied in the Android.bp file. |
| SetDefaultableHook(hook DefaultableHook) |
| |
| // Call the hook if specified. |
| callHookIfAvailable(context DefaultableHookContext) |
| } |
| |
| type DefaultableModule interface { |
| Module |
| Defaultable |
| } |
| |
| var _ Defaultable = (*DefaultableModuleBase)(nil) |
| |
| func InitDefaultableModule(module DefaultableModule) { |
| if module.(Module).base().module == nil { |
| panic("InitAndroidModule must be called before InitDefaultableModule") |
| } |
| module.setProperties(module.(Module).GetProperties(), module.(Module).base().variableProperties) |
| |
| module.AddProperties(module.defaults()) |
| |
| module.base().customizableProperties = module.GetProperties() |
| } |
| |
| // A restricted subset of context methods, similar to LoadHookContext. |
| type DefaultableHookContext interface { |
| EarlyModuleContext |
| |
| CreateModule(ModuleFactory, ...interface{}) Module |
| } |
| |
| type DefaultableHook func(ctx DefaultableHookContext) |
| |
| // The Defaults_visibility property. |
| type DefaultsVisibilityProperties struct { |
| |
| // Controls the visibility of the defaults module itself. |
| Defaults_visibility []string |
| } |
| |
| type DefaultsModuleBase struct { |
| DefaultableModuleBase |
| } |
| |
| // The common pattern for defaults modules is to register separate instances of |
| // the xxxProperties structs in the AddProperties calls, rather than reusing the |
| // ones inherited from Module. |
| // |
| // The effect is that e.g. myDefaultsModuleInstance.base().xxxProperties won't |
| // contain the values that have been set for the defaults module. Rather, to |
| // retrieve the values it is necessary to iterate over properties(). E.g. to get |
| // the commonProperties instance that have the real values: |
| // |
| // d := myModule.(Defaults) |
| // for _, props := range d.properties() { |
| // if cp, ok := props.(*commonProperties); ok { |
| // ... access property values in cp ... |
| // } |
| // } |
| // |
| // The rationale is that the properties on a defaults module apply to the |
| // defaultable modules using it, not to the defaults module itself. E.g. setting |
| // the "enabled" property false makes inheriting modules disabled by default, |
| // rather than disabling the defaults module itself. |
| type Defaults interface { |
| Defaultable |
| |
| // Although this function is unused it is actually needed to ensure that only modules that embed |
| // DefaultsModuleBase will type-assert to the Defaults interface. |
| isDefaults() bool |
| |
| // Get the structures containing the properties for which defaults can be provided. |
| properties() []interface{} |
| |
| productVariableProperties() interface{} |
| } |
| |
| func (d *DefaultsModuleBase) isDefaults() bool { |
| return true |
| } |
| |
| type DefaultsModule interface { |
| Module |
| Defaults |
| } |
| |
| func (d *DefaultsModuleBase) properties() []interface{} { |
| return d.defaultableProperties |
| } |
| |
| func (d *DefaultsModuleBase) productVariableProperties() interface{} { |
| return d.defaultableVariableProperties |
| } |
| |
| func (d *DefaultsModuleBase) GenerateAndroidBuildActions(ctx ModuleContext) { |
| } |
| |
| func InitDefaultsModule(module DefaultsModule) { |
| commonProperties := &commonProperties{} |
| |
| module.AddProperties( |
| &hostAndDeviceProperties{}, |
| commonProperties, |
| &ApexProperties{}, |
| &distProperties{}) |
| |
| initAndroidModuleBase(module) |
| initProductVariableModule(module) |
| initArchModule(module) |
| InitDefaultableModule(module) |
| |
| // Add properties that will not have defaults applied to them. |
| base := module.base() |
| defaultsVisibility := &DefaultsVisibilityProperties{} |
| module.AddProperties(&base.nameProperties, defaultsVisibility) |
| |
| // Unlike non-defaults modules the visibility property is not stored in m.base().commonProperties. |
| // Instead it is stored in a separate instance of commonProperties created above so clear the |
| // existing list of properties. |
| clearVisibilityProperties(module) |
| |
| // The defaults_visibility property controls the visibility of a defaults module so it must be |
| // set as the primary property, which also adds it to the list. |
| setPrimaryVisibilityProperty(module, "defaults_visibility", &defaultsVisibility.Defaults_visibility) |
| |
| // The visibility property needs to be checked (but not parsed) by the visibility module during |
| // its checking phase and parsing phase so add it to the list as a normal property. |
| AddVisibilityProperty(module, "visibility", &commonProperties.Visibility) |
| |
| // The applicable licenses property for defaults is 'licenses'. |
| setPrimaryLicensesProperty(module, "licenses", &commonProperties.Licenses) |
| |
| base.module = module |
| } |
| |
| var _ Defaults = (*DefaultsModuleBase)(nil) |
| |
| func (defaultable *DefaultableModuleBase) applyDefaults(ctx TopDownMutatorContext, |
| defaultsList []Defaults) { |
| |
| for _, defaults := range defaultsList { |
| for _, prop := range defaultable.defaultableProperties { |
| if prop == defaultable.defaultableVariableProperties { |
| defaultable.applyDefaultVariableProperties(ctx, defaults, prop) |
| } else { |
| defaultable.applyDefaultProperties(ctx, defaults, prop) |
| } |
| } |
| } |
| } |
| |
| // Product variable properties need special handling, the type of the filtered product variable |
| // property struct may not be identical between the defaults module and the defaultable module. |
| // Use PrependMatchingProperties to apply whichever properties match. |
| func (defaultable *DefaultableModuleBase) applyDefaultVariableProperties(ctx TopDownMutatorContext, |
| defaults Defaults, defaultableProp interface{}) { |
| if defaultableProp == nil { |
| return |
| } |
| |
| defaultsProp := defaults.productVariableProperties() |
| if defaultsProp == nil { |
| return |
| } |
| |
| dst := []interface{}{ |
| defaultableProp, |
| // Put an empty copy of the src properties into dst so that properties in src that are not in dst |
| // don't cause a "failed to find property to extend" error. |
| proptools.CloneEmptyProperties(reflect.ValueOf(defaultsProp)).Interface(), |
| } |
| |
| err := proptools.PrependMatchingProperties(dst, defaultsProp, nil) |
| if err != nil { |
| if propertyErr, ok := err.(*proptools.ExtendPropertyError); ok { |
| ctx.PropertyErrorf(propertyErr.Property, "%s", propertyErr.Err.Error()) |
| } else { |
| panic(err) |
| } |
| } |
| } |
| |
| func (defaultable *DefaultableModuleBase) applyDefaultProperties(ctx TopDownMutatorContext, |
| defaults Defaults, defaultableProp interface{}) { |
| |
| for _, def := range defaults.properties() { |
| if proptools.TypeEqual(defaultableProp, def) { |
| err := proptools.PrependProperties(defaultableProp, def, nil) |
| if err != nil { |
| if propertyErr, ok := err.(*proptools.ExtendPropertyError); ok { |
| ctx.PropertyErrorf(propertyErr.Property, "%s", propertyErr.Err.Error()) |
| } else { |
| panic(err) |
| } |
| } |
| } |
| } |
| } |
| |
| func RegisterDefaultsPreArchMutators(ctx RegisterMutatorsContext) { |
| ctx.BottomUp("defaults_deps", defaultsDepsMutator).Parallel() |
| ctx.TopDown("defaults", defaultsMutator).Parallel() |
| } |
| |
| func defaultsDepsMutator(ctx BottomUpMutatorContext) { |
| if defaultable, ok := ctx.Module().(Defaultable); ok { |
| ctx.AddDependency(ctx.Module(), DefaultsDepTag, defaultable.defaults().Defaults...) |
| } |
| } |
| |
| func defaultsMutator(ctx TopDownMutatorContext) { |
| if defaultable, ok := ctx.Module().(Defaultable); ok { |
| if len(defaultable.defaults().Defaults) > 0 { |
| var defaultsList []Defaults |
| seen := make(map[Defaults]bool) |
| |
| ctx.WalkDeps(func(module, parent Module) bool { |
| if ctx.OtherModuleDependencyTag(module) == DefaultsDepTag { |
| if defaults, ok := module.(Defaults); ok { |
| if !seen[defaults] { |
| seen[defaults] = true |
| defaultsList = append(defaultsList, defaults) |
| return len(defaults.defaults().Defaults) > 0 |
| } |
| } else { |
| ctx.PropertyErrorf("defaults", "module %s is not an defaults module", |
| ctx.OtherModuleName(module)) |
| } |
| } |
| return false |
| }) |
| defaultable.applyDefaults(ctx, defaultsList) |
| } |
| |
| defaultable.callHookIfAvailable(ctx) |
| } |
| } |