tools/releasetools/sparse_img.py - SHIFTPHONES/android_build - Gitiles

 # Copyright (C) 2014 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 import bisect
 import os
 import struct
 from hashlib import sha1

 import rangelib


 class SparseImage(object):
   """Wraps a sparse image file into an image object.

   Wraps a sparse image file (and optional file map and clobbered_blocks) into
   an image object suitable for passing to BlockImageDiff. file_map contains
   the mapping between files and their blocks. clobbered_blocks contains the set
   of blocks that should be always written to the target regardless of the old
   contents (i.e. copying instead of patching). clobbered_blocks should be in
   the form of a string like "0" or "0 1-5 8".
   """

   def __init__(self, simg_fn, file_map_fn=None, clobbered_blocks=None):
     self.simg_f = f = open(simg_fn, "rb")

     header_bin = f.read(28)
     header = struct.unpack("<I4H4I", header_bin)

     magic = header[0]
     major_version = header[1]
     minor_version = header[2]
     file_hdr_sz = header[3]
     chunk_hdr_sz = header[4]
     self.blocksize = blk_sz = header[5]
     self.total_blocks = total_blks = header[6]
     total_chunks = header[7]

     if magic != 0xED26FF3A:
       raise ValueError("Magic should be 0xED26FF3A but is 0x%08X" % (magic,))
     if major_version != 1 or minor_version != 0:
       raise ValueError("I know about version 1.0, but this is version %u.%u" %
                        (major_version, minor_version))
     if file_hdr_sz != 28:
       raise ValueError("File header size was expected to be 28, but is %u." %
                        (file_hdr_sz,))
     if chunk_hdr_sz != 12:
       raise ValueError("Chunk header size was expected to be 12, but is %u." %
                        (chunk_hdr_sz,))

     print("Total of %u %u-byte output blocks in %u input chunks."
           % (total_blks, blk_sz, total_chunks))

     pos = 0   # in blocks
     care_data = []
     self.offset_map = offset_map = []
     self.clobbered_blocks = rangelib.RangeSet(data=clobbered_blocks)

     for i in range(total_chunks):
       header_bin = f.read(12)
       header = struct.unpack("<2H2I", header_bin)
       chunk_type = header[0]
       chunk_sz = header[2]
       total_sz = header[3]
       data_sz = total_sz - 12

       if chunk_type == 0xCAC1:
         if data_sz != (chunk_sz * blk_sz):
           raise ValueError(
               "Raw chunk input size (%u) does not match output size (%u)" %
               (data_sz, chunk_sz * blk_sz))
         else:
           care_data.append(pos)
           care_data.append(pos + chunk_sz)
           offset_map.append((pos, chunk_sz, f.tell(), None))
           pos += chunk_sz
           f.seek(data_sz, os.SEEK_CUR)

       elif chunk_type == 0xCAC2:
         fill_data = f.read(4)
         care_data.append(pos)
         care_data.append(pos + chunk_sz)
         offset_map.append((pos, chunk_sz, None, fill_data))
         pos += chunk_sz

       elif chunk_type == 0xCAC3:
         if data_sz != 0:
           raise ValueError("Don't care chunk input size is non-zero (%u)" %
                            (data_sz))
         else:
           pos += chunk_sz

       elif chunk_type == 0xCAC4:
         raise ValueError("CRC32 chunks are not supported")

       else:
         raise ValueError("Unknown chunk type 0x%04X not supported" %
                          (chunk_type,))

     self.care_map = rangelib.RangeSet(care_data)
     self.offset_index = [i[0] for i in offset_map]

     # Bug: 20881595
     # Introduce extended blocks as a workaround for the bug. dm-verity may
     # touch blocks that are not in the care_map due to block device
     # read-ahead. It will fail if such blocks contain non-zeroes. We zero out
     # the extended blocks explicitly to avoid dm-verity failures. 512 blocks
     # are the maximum read-ahead we configure for dm-verity block devices.
     extended = self.care_map.extend(512)
     all_blocks = rangelib.RangeSet(data=(0, self.total_blocks))
     extended = extended.intersect(all_blocks).subtract(self.care_map)
     self.extended = extended

     if file_map_fn:
       self.LoadFileBlockMap(file_map_fn, self.clobbered_blocks)
     else:
       self.file_map = {"__DATA": self.care_map}

   def ReadRangeSet(self, ranges):
     return [d for d in self._GetRangeData(ranges)]

   def TotalSha1(self, include_clobbered_blocks=False):
     """Return the SHA-1 hash of all data in the 'care' regions.

     If include_clobbered_blocks is True, it returns the hash including the
     clobbered_blocks."""
     ranges = self.care_map
     if not include_clobbered_blocks:
       ranges = ranges.subtract(self.clobbered_blocks)
     h = sha1()
     for d in self._GetRangeData(ranges):
       h.update(d)
     return h.hexdigest()

   def _GetRangeData(self, ranges):
     """Generator that produces all the image data in 'ranges'.  The
     number of individual pieces returned is arbitrary (and in
     particular is not necessarily equal to the number of ranges in
     'ranges'.

     This generator is stateful -- it depends on the open file object
     contained in this SparseImage, so you should not try to run two
     instances of this generator on the same object simultaneously."""

     f = self.simg_f
     for s, e in ranges:
       to_read = e-s
       idx = bisect.bisect_right(self.offset_index, s) - 1
       chunk_start, chunk_len, filepos, fill_data = self.offset_map[idx]

       # for the first chunk we may be starting partway through it.
       remain = chunk_len - (s - chunk_start)
       this_read = min(remain, to_read)
       if filepos is not None:
         p = filepos + ((s - chunk_start) * self.blocksize)
         f.seek(p, os.SEEK_SET)
         yield f.read(this_read * self.blocksize)
       else:
         yield fill_data * (this_read * (self.blocksize >> 2))
       to_read -= this_read

       while to_read > 0:
         # continue with following chunks if this range spans multiple chunks.
         idx += 1
         chunk_start, chunk_len, filepos, fill_data = self.offset_map[idx]
         this_read = min(chunk_len, to_read)
         if filepos is not None:
           f.seek(filepos, os.SEEK_SET)
           yield f.read(this_read * self.blocksize)
         else:
           yield fill_data * (this_read * (self.blocksize >> 2))
         to_read -= this_read

   def LoadFileBlockMap(self, fn, clobbered_blocks):
     remaining = self.care_map
     self.file_map = out = {}

     with open(fn) as f:
       for line in f:
         fn, ranges = line.split(None, 1)
         ranges = rangelib.RangeSet.parse(ranges)
         out[fn] = ranges
         assert ranges.size() == ranges.intersect(remaining).size()

         # Currently we assume that blocks in clobbered_blocks are not part of
         # any file.
         assert not clobbered_blocks.overlaps(ranges)
         remaining = remaining.subtract(ranges)

     remaining = remaining.subtract(clobbered_blocks)

     # For all the remaining blocks in the care_map (ie, those that
     # aren't part of the data for any file nor part of the clobbered_blocks),
     # divide them into blocks that are all zero and blocks that aren't.
     # (Zero blocks are handled specially because (1) there are usually
     # a lot of them and (2) bsdiff handles files with long sequences of
     # repeated bytes especially poorly.)

     zero_blocks = []
     nonzero_blocks = []
     reference = '\0' * self.blocksize

     f = self.simg_f
     for s, e in remaining:
       for b in range(s, e):
         idx = bisect.bisect_right(self.offset_index, b) - 1
         chunk_start, _, filepos, fill_data = self.offset_map[idx]
         if filepos is not None:
           filepos += (b-chunk_start) * self.blocksize
           f.seek(filepos, os.SEEK_SET)
           data = f.read(self.blocksize)
         else:
           if fill_data == reference[:4]:   # fill with all zeros
             data = reference
           else:
             data = None

         if data == reference:
           zero_blocks.append(b)
           zero_blocks.append(b+1)
         else:
           nonzero_blocks.append(b)
           nonzero_blocks.append(b+1)

     assert zero_blocks or nonzero_blocks or clobbered_blocks

     if zero_blocks:
       out["__ZERO"] = rangelib.RangeSet(data=zero_blocks)
     if nonzero_blocks:
       out["__NONZERO"] = rangelib.RangeSet(data=nonzero_blocks)
     if clobbered_blocks:
       out["__COPY"] = clobbered_blocks

   def ResetFileMap(self):
     """Throw away the file map and treat the entire image as
     undifferentiated data."""
     self.file_map = {"__DATA": self.care_map}
	# Copyright (C) 2014 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	import bisect
	import os
	import struct
	from hashlib import sha1

	import rangelib


	class SparseImage(object):
	"""Wraps a sparse image file into an image object.

	Wraps a sparse image file (and optional file map and clobbered_blocks) into
	an image object suitable for passing to BlockImageDiff. file_map contains
	the mapping between files and their blocks. clobbered_blocks contains the set
	of blocks that should be always written to the target regardless of the old
	contents (i.e. copying instead of patching). clobbered_blocks should be in
	the form of a string like "0" or "0 1-5 8".
	"""

	def __init__(self, simg_fn, file_map_fn=None, clobbered_blocks=None):
	self.simg_f = f = open(simg_fn, "rb")

	header_bin = f.read(28)
	header = struct.unpack("<I4H4I", header_bin)

	magic = header[0]
	major_version = header[1]
	minor_version = header[2]
	file_hdr_sz = header[3]
	chunk_hdr_sz = header[4]
	self.blocksize = blk_sz = header[5]
	self.total_blocks = total_blks = header[6]
	total_chunks = header[7]

	if magic != 0xED26FF3A:
	raise ValueError("Magic should be 0xED26FF3A but is 0x%08X" % (magic,))
	if major_version != 1 or minor_version != 0:
	raise ValueError("I know about version 1.0, but this is version %u.%u" %
	(major_version, minor_version))
	if file_hdr_sz != 28:
	raise ValueError("File header size was expected to be 28, but is %u." %
	(file_hdr_sz,))
	if chunk_hdr_sz != 12:
	raise ValueError("Chunk header size was expected to be 12, but is %u." %
	(chunk_hdr_sz,))

	print("Total of %u %u-byte output blocks in %u input chunks."
	% (total_blks, blk_sz, total_chunks))

	pos = 0 # in blocks
	care_data = []
	self.offset_map = offset_map = []
	self.clobbered_blocks = rangelib.RangeSet(data=clobbered_blocks)

	for i in range(total_chunks):
	header_bin = f.read(12)
	header = struct.unpack("<2H2I", header_bin)
	chunk_type = header[0]
	chunk_sz = header[2]
	total_sz = header[3]
	data_sz = total_sz - 12

	if chunk_type == 0xCAC1:
	if data_sz != (chunk_sz * blk_sz):
	raise ValueError(
	"Raw chunk input size (%u) does not match output size (%u)" %
	(data_sz, chunk_sz * blk_sz))
	else:
	care_data.append(pos)
	care_data.append(pos + chunk_sz)
	offset_map.append((pos, chunk_sz, f.tell(), None))
	pos += chunk_sz
	f.seek(data_sz, os.SEEK_CUR)

	elif chunk_type == 0xCAC2:
	fill_data = f.read(4)
	care_data.append(pos)
	care_data.append(pos + chunk_sz)
	offset_map.append((pos, chunk_sz, None, fill_data))
	pos += chunk_sz

	elif chunk_type == 0xCAC3:
	if data_sz != 0:
	raise ValueError("Don't care chunk input size is non-zero (%u)" %
	(data_sz))
	else:
	pos += chunk_sz

	elif chunk_type == 0xCAC4:
	raise ValueError("CRC32 chunks are not supported")

	else:
	raise ValueError("Unknown chunk type 0x%04X not supported" %
	(chunk_type,))

	self.care_map = rangelib.RangeSet(care_data)
	self.offset_index = [i[0] for i in offset_map]

	# Bug: 20881595
	# Introduce extended blocks as a workaround for the bug. dm-verity may
	# touch blocks that are not in the care_map due to block device
	# read-ahead. It will fail if such blocks contain non-zeroes. We zero out
	# the extended blocks explicitly to avoid dm-verity failures. 512 blocks
	# are the maximum read-ahead we configure for dm-verity block devices.
	extended = self.care_map.extend(512)
	all_blocks = rangelib.RangeSet(data=(0, self.total_blocks))
	extended = extended.intersect(all_blocks).subtract(self.care_map)
	self.extended = extended

	if file_map_fn:
	self.LoadFileBlockMap(file_map_fn, self.clobbered_blocks)
	else:
	self.file_map = {"__DATA": self.care_map}

	def ReadRangeSet(self, ranges):
	return [d for d in self._GetRangeData(ranges)]

	def TotalSha1(self, include_clobbered_blocks=False):
	"""Return the SHA-1 hash of all data in the 'care' regions.

	If include_clobbered_blocks is True, it returns the hash including the
	clobbered_blocks."""
	ranges = self.care_map
	if not include_clobbered_blocks:
	ranges = ranges.subtract(self.clobbered_blocks)
	h = sha1()
	for d in self._GetRangeData(ranges):
	h.update(d)
	return h.hexdigest()

	def _GetRangeData(self, ranges):
	"""Generator that produces all the image data in 'ranges'. The
	number of individual pieces returned is arbitrary (and in
	particular is not necessarily equal to the number of ranges in
	'ranges'.

	This generator is stateful -- it depends on the open file object
	contained in this SparseImage, so you should not try to run two
	instances of this generator on the same object simultaneously."""

	f = self.simg_f
	for s, e in ranges:
	to_read = e-s
	idx = bisect.bisect_right(self.offset_index, s) - 1
	chunk_start, chunk_len, filepos, fill_data = self.offset_map[idx]

	# for the first chunk we may be starting partway through it.
	remain = chunk_len - (s - chunk_start)
	this_read = min(remain, to_read)
	if filepos is not None:
	p = filepos + ((s - chunk_start) * self.blocksize)
	f.seek(p, os.SEEK_SET)
	yield f.read(this_read * self.blocksize)
	else:
	yield fill_data * (this_read * (self.blocksize >> 2))
	to_read -= this_read

	while to_read > 0:
	# continue with following chunks if this range spans multiple chunks.
	idx += 1
	chunk_start, chunk_len, filepos, fill_data = self.offset_map[idx]
	this_read = min(chunk_len, to_read)
	if filepos is not None:
	f.seek(filepos, os.SEEK_SET)
	yield f.read(this_read * self.blocksize)
	else:
	yield fill_data * (this_read * (self.blocksize >> 2))
	to_read -= this_read

	def LoadFileBlockMap(self, fn, clobbered_blocks):
	remaining = self.care_map
	self.file_map = out = {}

	with open(fn) as f:
	for line in f:
	fn, ranges = line.split(None, 1)
	ranges = rangelib.RangeSet.parse(ranges)
	out[fn] = ranges
	assert ranges.size() == ranges.intersect(remaining).size()

	# Currently we assume that blocks in clobbered_blocks are not part of
	# any file.
	assert not clobbered_blocks.overlaps(ranges)
	remaining = remaining.subtract(ranges)

	remaining = remaining.subtract(clobbered_blocks)

	# For all the remaining blocks in the care_map (ie, those that
	# aren't part of the data for any file nor part of the clobbered_blocks),
	# divide them into blocks that are all zero and blocks that aren't.
	# (Zero blocks are handled specially because (1) there are usually
	# a lot of them and (2) bsdiff handles files with long sequences of
	# repeated bytes especially poorly.)

	zero_blocks = []
	nonzero_blocks = []
	reference = '\0' * self.blocksize

	f = self.simg_f
	for s, e in remaining:
	for b in range(s, e):
	idx = bisect.bisect_right(self.offset_index, b) - 1
	chunk_start, _, filepos, fill_data = self.offset_map[idx]
	if filepos is not None:
	filepos += (b-chunk_start) * self.blocksize
	f.seek(filepos, os.SEEK_SET)
	data = f.read(self.blocksize)
	else:
	if fill_data == reference[:4]: # fill with all zeros
	data = reference
	else:
	data = None

	if data == reference:
	zero_blocks.append(b)
	zero_blocks.append(b+1)
	else:
	nonzero_blocks.append(b)
	nonzero_blocks.append(b+1)

	assert zero_blocks or nonzero_blocks or clobbered_blocks

	if zero_blocks:
	out["__ZERO"] = rangelib.RangeSet(data=zero_blocks)
	if nonzero_blocks:
	out["__NONZERO"] = rangelib.RangeSet(data=nonzero_blocks)
	if clobbered_blocks:
	out["__COPY"] = clobbered_blocks

	def ResetFileMap(self):
	"""Throw away the file map and treat the entire image as
	undifferentiated data."""
	self.file_map = {"__DATA": self.care_map}