Gitiles
Code Review Sign In
review.shift-gmbh.com / SHIFTPHONES / android_build / 9fee6befad7020a96bf64cbff77e458648bf6bbe / . / tools / releasetools / ota_from_target_files.py
blob: 522d4891955c8fe25af66a71270b29307ee3840d [file] [log] [blame]
#!/usr/bin/env python
#
# Copyright (C) 2008 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""
Given a target-files zipfile, produces an OTA package that installs that build.
An incremental OTA is produced if -i is given, otherwise a full OTA is produced.
Usage: ota_from_target_files [options] input_target_files output_ota_package
Common options that apply to both of non-A/B and A/B OTAs
--downgrade
Intentionally generate an incremental OTA that updates from a newer build
to an older one (e.g. downgrading from P preview back to O MR1).
"ota-downgrade=yes" will be set in the package metadata file. A data wipe
will always be enforced when using this flag, so "ota-wipe=yes" will also
be included in the metadata file. The update-binary in the source build
will be used in the OTA package, unless --binary flag is specified. Please
also check the comment for --override_timestamp below.
-i (--incremental_from) <file>
Generate an incremental OTA using the given target-files zip as the
starting build.
-k (--package_key) <key>
Key to use to sign the package (default is the value of
default_system_dev_certificate from the input target-files's
META/misc_info.txt, or "build/make/target/product/security/testkey" if
that value is not specified).
For incremental OTAs, the default value is based on the source
target-file, not the target build.
--override_timestamp
Intentionally generate an incremental OTA that updates from a newer build
to an older one (based on timestamp comparison), by setting the downgrade
flag in the package metadata. This differs from --downgrade flag, as we
don't enforce a data wipe with this flag. Because we know for sure this is
NOT an actual downgrade case, but two builds happen to be cut in a reverse
order (e.g. from two branches). A legit use case is that we cut a new
build C (after having A and B), but want to enfore an update path of A ->
C -> B. Specifying --downgrade may not help since that would enforce a
data wipe for C -> B update.
We used to set a fake timestamp in the package metadata for this flow. But
now we consolidate the two cases (i.e. an actual downgrade, or a downgrade
based on timestamp) with the same "ota-downgrade=yes" flag, with the
difference being whether "ota-wipe=yes" is set.
--wipe_user_data
Generate an OTA package that will wipe the user data partition when
installed.
--retrofit_dynamic_partitions
Generates an OTA package that updates a device to support dynamic
partitions (default False). This flag is implied when generating
an incremental OTA where the base build does not support dynamic
partitions but the target build does. For A/B, when this flag is set,
--skip_postinstall is implied.
--skip_compatibility_check
Skip checking compatibility of the input target files package.
--output_metadata_path
Write a copy of the metadata to a separate file. Therefore, users can
read the post build fingerprint without extracting the OTA package.
--force_non_ab
This flag can only be set on an A/B device that also supports non-A/B
updates. Implies --two_step.
If set, generate that non-A/B update package.
If not set, generates A/B package for A/B device and non-A/B package for
non-A/B device.
-o (--oem_settings) <main_file[,additional_files...]>
Comma separated list of files used to specify the expected OEM-specific
properties on the OEM partition of the intended device. Multiple expected
values can be used by providing multiple files. Only the first dict will
be used to compute fingerprint, while the rest will be used to assert
OEM-specific properties.
Non-A/B OTA specific options
-b (--binary) <file>
Use the given binary as the update-binary in the output package, instead
of the binary in the build's target_files. Use for development only.
--block
Generate a block-based OTA for non-A/B device. We have deprecated the
support for file-based OTA since O. Block-based OTA will be used by
default for all non-A/B devices. Keeping this flag here to not break
existing callers.
-e (--extra_script) <file>
Insert the contents of file at the end of the update script.
--full_bootloader
Similar to --full_radio. When generating an incremental OTA, always
include a full copy of bootloader image.
--full_radio
When generating an incremental OTA, always include a full copy of radio
image. This option is only meaningful when -i is specified, because a full
radio is always included in a full OTA if applicable.
--log_diff <file>
Generate a log file that shows the differences in the source and target
builds for an incremental package. This option is only meaningful when -i
is specified.
--oem_no_mount
For devices with OEM-specific properties but without an OEM partition, do
not mount the OEM partition in the updater-script. This should be very
rarely used, since it's expected to have a dedicated OEM partition for
OEM-specific properties. Only meaningful when -o is specified.
--stash_threshold <float>
Specify the threshold that will be used to compute the maximum allowed
stash size (defaults to 0.8).
-t (--worker_threads) <int>
Specify the number of worker-threads that will be used when generating
patches for incremental updates (defaults to 3).
--verify
Verify the checksums of the updated system and vendor (if any) partitions.
Non-A/B incremental OTAs only.
-2 (--two_step)
Generate a 'two-step' OTA package, where recovery is updated first, so
that any changes made to the system partition are done using the new
recovery (new kernel, etc.).
A/B OTA specific options
--disable_fec_computation
Disable the on device FEC data computation for incremental updates.
--include_secondary
Additionally include the payload for secondary slot images (default:
False). Only meaningful when generating A/B OTAs.
By default, an A/B OTA package doesn't contain the images for the
secondary slot (e.g. system_other.img). Specifying this flag allows
generating a separate payload that will install secondary slot images.
Such a package needs to be applied in a two-stage manner, with a reboot
in-between. During the first stage, the updater applies the primary
payload only. Upon finishing, it reboots the device into the newly updated
slot. It then continues to install the secondary payload to the inactive
slot, but without switching the active slot at the end (needs the matching
support in update_engine, i.e. SWITCH_SLOT_ON_REBOOT flag).
Due to the special install procedure, the secondary payload will be always
generated as a full payload.
--payload_signer <signer>
Specify the signer when signing the payload and metadata for A/B OTAs.
By default (i.e. without this flag), it calls 'openssl pkeyutl' to sign
with the package private key. If the private key cannot be accessed
directly, a payload signer that knows how to do that should be specified.
The signer will be supplied with "-inkey <path_to_key>",
"-in <input_file>" and "-out <output_file>" parameters.
--payload_signer_args <args>
Specify the arguments needed for payload signer.
--payload_signer_maximum_signature_size <signature_size>
The maximum signature size (in bytes) that would be generated by the given
payload signer. Only meaningful when custom payload signer is specified
via '--payload_signer'.
If the signer uses a RSA key, this should be the number of bytes to
represent the modulus. If it uses an EC key, this is the size of a
DER-encoded ECDSA signature.
--payload_signer_key_size <key_size>
Deprecated. Use the '--payload_signer_maximum_signature_size' instead.
--boot_variable_file <path>
A file that contains the possible values of ro.boot.* properties. It's
used to calculate the possible runtime fingerprints when some
ro.product.* properties are overridden by the 'import' statement.
The file expects one property per line, and each line has the following
format: 'prop_name=value1,value2'. e.g. 'ro.boot.product.sku=std,pro'
--skip_postinstall
Skip the postinstall hooks when generating an A/B OTA package (default:
False). Note that this discards ALL the hooks, including non-optional
ones. Should only be used if caller knows it's safe to do so (e.g. all the
postinstall work is to dexopt apps and a data wipe will happen immediately
after). Only meaningful when generating A/B OTAs.
--partial "<PARTITION> [<PARTITION>[...]]"
Generate partial updates, overriding ab_partitions list with the given
list.
--custom_image <custom_partition=custom_image>
Use the specified custom_image to update custom_partition when generating
an A/B OTA package. e.g. "--custom_image oem=oem.img --custom_image
cus=cus_test.img"
--disable_vabc
Disable Virtual A/B Compression, for builds that have compression enabled
by default.
--vabc_downgrade
Don't disable Virtual A/B Compression for downgrading OTAs.
For VABC downgrades, we must finish merging before doing data wipe, and
since data wipe is required for downgrading OTA, this might cause long
wait time in recovery.
--enable_vabc_xor
Enable the VABC xor feature. Will reduce space requirements for OTA
--force_minor_version
Override the update_engine minor version for delta generation.
--compressor_types
A colon ':' separated list of compressors. Allowed values are bz2 and brotli.
--enable_zucchini
Whether to enable to zucchini feature. Will generate smaller OTA but uses more memory.
--enable_lz4diff
Whether to enable lz4diff feature. Will generate smaller OTA for EROFS but
uses more memory.
--spl_downgrade
Force generate an SPL downgrade OTA. Only needed if target build has an
older SPL.
--vabc_compression_param
Compression algorithm to be used for VABC. Available options: gz, brotli, none
"""
from __future__ import print_function
import logging
import multiprocessing
import os
import os.path
import re
import shlex
import shutil
import struct
import subprocess
import sys
import zipfile
import care_map_pb2
import common
import ota_utils
from ota_utils import (UNZIP_PATTERN, FinalizeMetadata, GetPackageMetadata,
PropertyFiles, SECURITY_PATCH_LEVEL_PROP_NAME, GetZipEntryOffset)
from common import IsSparseImage
import target_files_diff
from check_target_files_vintf import CheckVintfIfTrebleEnabled
from non_ab_ota import GenerateNonAbOtaPackage
if sys.hexversion < 0x02070000:
print("Python 2.7 or newer is required.", file=sys.stderr)
sys.exit(1)
logger = logging.getLogger(__name__)
OPTIONS = ota_utils.OPTIONS
OPTIONS.verify = False
OPTIONS.patch_threshold = 0.95
OPTIONS.wipe_user_data = False
OPTIONS.extra_script = None
OPTIONS.worker_threads = multiprocessing.cpu_count() // 2
if OPTIONS.worker_threads == 0:
OPTIONS.worker_threads = 1
OPTIONS.two_step = False
OPTIONS.include_secondary = False
OPTIONS.block_based = True
OPTIONS.updater_binary = None
OPTIONS.oem_dicts = None
OPTIONS.oem_source = None
OPTIONS.oem_no_mount = False
OPTIONS.full_radio = False
OPTIONS.full_bootloader = False
# Stash size cannot exceed cache_size * threshold.
OPTIONS.cache_size = None
OPTIONS.stash_threshold = 0.8
OPTIONS.log_diff = None
OPTIONS.payload_signer = None
OPTIONS.payload_signer_args = []
OPTIONS.payload_signer_maximum_signature_size = None
OPTIONS.extracted_input = None
OPTIONS.skip_postinstall = False
OPTIONS.skip_compatibility_check = False
OPTIONS.disable_fec_computation = False
OPTIONS.disable_verity_computation = False
OPTIONS.partial = None
OPTIONS.custom_images = {}
OPTIONS.disable_vabc = False
OPTIONS.spl_downgrade = False
OPTIONS.vabc_downgrade = False
OPTIONS.enable_vabc_xor = True
OPTIONS.force_minor_version = None
OPTIONS.compressor_types = None
OPTIONS.enable_zucchini = True
OPTIONS.enable_lz4diff = False
OPTIONS.vabc_compression_param = None
POSTINSTALL_CONFIG = 'META/postinstall_config.txt'
DYNAMIC_PARTITION_INFO = 'META/dynamic_partitions_info.txt'
AB_PARTITIONS = 'META/ab_partitions.txt'
# Files to be unzipped for target diffing purpose.
TARGET_DIFFING_UNZIP_PATTERN = ['BOOT', 'RECOVERY', 'SYSTEM/*', 'VENDOR/*',
'PRODUCT/*', 'SYSTEM_EXT/*', 'ODM/*',
'VENDOR_DLKM/*', 'ODM_DLKM/*', 'SYSTEM_DLKM/*']
RETROFIT_DAP_UNZIP_PATTERN = ['OTA/super_*.img', AB_PARTITIONS]
# Images to be excluded from secondary payload. We essentially only keep
# 'system_other' and bootloader partitions.
SECONDARY_PAYLOAD_SKIPPED_IMAGES = [
'boot', 'dtbo', 'modem', 'odm', 'odm_dlkm', 'product', 'radio', 'recovery',
'system_dlkm', 'system_ext', 'vbmeta', 'vbmeta_system', 'vbmeta_vendor',
'vendor', 'vendor_boot']
class PayloadSigner(object):
"""A class that wraps the payload signing works.
When generating a Payload, hashes of the payload and metadata files will be
signed with the device key, either by calling an external payload signer or
by calling openssl with the package key. This class provides a unified
interface, so that callers can just call PayloadSigner.Sign().
If an external payload signer has been specified (OPTIONS.payload_signer), it
calls the signer with the provided args (OPTIONS.payload_signer_args). Note
that the signing key should be provided as part of the payload_signer_args.
Otherwise without an external signer, it uses the package key
(OPTIONS.package_key) and calls openssl for the signing works.
"""
def __init__(self):
if OPTIONS.payload_signer is None:
# Prepare the payload signing key.
private_key = OPTIONS.package_key + OPTIONS.private_key_suffix
pw = OPTIONS.key_passwords[OPTIONS.package_key]
cmd = ["openssl", "pkcs8", "-in", private_key, "-inform", "DER"]
cmd.extend(["-passin", "pass:" + pw] if pw else ["-nocrypt"])
signing_key = common.MakeTempFile(prefix="key-", suffix=".key")
cmd.extend(["-out", signing_key])
common.RunAndCheckOutput(cmd, verbose=False)
self.signer = "openssl"
self.signer_args = ["pkeyutl", "-sign", "-inkey", signing_key,
"-pkeyopt", "digest:sha256"]
self.maximum_signature_size = self._GetMaximumSignatureSizeInBytes(
signing_key)
else:
self.signer = OPTIONS.payload_signer
self.signer_args = OPTIONS.payload_signer_args
if OPTIONS.payload_signer_maximum_signature_size:
self.maximum_signature_size = int(
OPTIONS.payload_signer_maximum_signature_size)
else:
# The legacy config uses RSA2048 keys.
logger.warning("The maximum signature size for payload signer is not"
" set, default to 256 bytes.")
self.maximum_signature_size = 256
@staticmethod
def _GetMaximumSignatureSizeInBytes(signing_key):
out_signature_size_file = common.MakeTempFile("signature_size")
cmd = ["delta_generator", "--out_maximum_signature_size_file={}".format(
out_signature_size_file), "--private_key={}".format(signing_key)]
common.RunAndCheckOutput(cmd)
with open(out_signature_size_file) as f:
signature_size = f.read().rstrip()
logger.info("%s outputs the maximum signature size: %s", cmd[0],
signature_size)
return int(signature_size)
def Sign(self, in_file):
"""Signs the given input file. Returns the output filename."""
out_file = common.MakeTempFile(prefix="signed-", suffix=".bin")
cmd = [self.signer] + self.signer_args + ['-in', in_file, '-out', out_file]
common.RunAndCheckOutput(cmd)
return out_file
class Payload(object):
"""Manages the creation and the signing of an A/B OTA Payload."""
PAYLOAD_BIN = 'payload.bin'
PAYLOAD_PROPERTIES_TXT = 'payload_properties.txt'
SECONDARY_PAYLOAD_BIN = 'secondary/payload.bin'
SECONDARY_PAYLOAD_PROPERTIES_TXT = 'secondary/payload_properties.txt'
def __init__(self, secondary=False):
"""Initializes a Payload instance.
Args:
secondary: Whether it's generating a secondary payload (default: False).
"""
self.payload_file = None
self.payload_properties = None
self.secondary = secondary
def _Run(self, cmd): # pylint: disable=no-self-use
# Don't pipe (buffer) the output if verbose is set. Let
# brillo_update_payload write to stdout/stderr directly, so its progress can
# be monitored.
if OPTIONS.verbose:
common.RunAndCheckOutput(cmd, stdout=None, stderr=None)
else:
common.RunAndCheckOutput(cmd)
def Generate(self, target_file, source_file=None, additional_args=None):
"""Generates a payload from the given target-files zip(s).
Args:
target_file: The filename of the target build target-files zip.
source_file: The filename of the source build target-files zip; or None if
generating a full OTA.
additional_args: A list of additional args that should be passed to
brillo_update_payload script; or None.
"""
if additional_args is None:
additional_args = []
payload_file = common.MakeTempFile(prefix="payload-", suffix=".bin")
cmd = ["brillo_update_payload", "generate",
"--payload", payload_file,
"--target_image", target_file]
if source_file is not None:
cmd.extend(["--source_image", source_file])
if OPTIONS.disable_fec_computation:
cmd.extend(["--disable_fec_computation", "true"])
if OPTIONS.disable_verity_computation:
cmd.extend(["--disable_verity_computation", "true"])
cmd.extend(additional_args)
self._Run(cmd)
self.payload_file = payload_file
self.payload_properties = None
def Sign(self, payload_signer):
"""Generates and signs the hashes of the payload and metadata.
Args:
payload_signer: A PayloadSigner() instance that serves the signing work.
Raises:
AssertionError: On any failure when calling brillo_update_payload script.
"""
assert isinstance(payload_signer, PayloadSigner)
# 1. Generate hashes of the payload and metadata files.
payload_sig_file = common.MakeTempFile(prefix="sig-", suffix=".bin")
metadata_sig_file = common.MakeTempFile(prefix="sig-", suffix=".bin")
cmd = ["brillo_update_payload", "hash",
"--unsigned_payload", self.payload_file,
"--signature_size", str(payload_signer.maximum_signature_size),
"--metadata_hash_file", metadata_sig_file,
"--payload_hash_file", payload_sig_file]
self._Run(cmd)
# 2. Sign the hashes.
signed_payload_sig_file = payload_signer.Sign(payload_sig_file)
signed_metadata_sig_file = payload_signer.Sign(metadata_sig_file)
# 3. Insert the signatures back into the payload file.
signed_payload_file = common.MakeTempFile(prefix="signed-payload-",
suffix=".bin")
cmd = ["brillo_update_payload", "sign",
"--unsigned_payload", self.payload_file,
"--payload", signed_payload_file,
"--signature_size", str(payload_signer.maximum_signature_size),
"--metadata_signature_file", signed_metadata_sig_file,
"--payload_signature_file", signed_payload_sig_file]
self._Run(cmd)
# 4. Dump the signed payload properties.
properties_file = common.MakeTempFile(prefix="payload-properties-",
suffix=".txt")
cmd = ["brillo_update_payload", "properties",
"--payload", signed_payload_file,
"--properties_file", properties_file]
self._Run(cmd)
if self.secondary:
with open(properties_file, "a") as f:
f.write("SWITCH_SLOT_ON_REBOOT=0\n")
if OPTIONS.wipe_user_data:
with open(properties_file, "a") as f:
f.write("POWERWASH=1\n")
self.payload_file = signed_payload_file
self.payload_properties = properties_file
def WriteToZip(self, output_zip):
"""Writes the payload to the given zip.
Args:
output_zip: The output ZipFile instance.
"""
assert self.payload_file is not None
assert self.payload_properties is not None
if self.secondary:
payload_arcname = Payload.SECONDARY_PAYLOAD_BIN
payload_properties_arcname = Payload.SECONDARY_PAYLOAD_PROPERTIES_TXT
else:
payload_arcname = Payload.PAYLOAD_BIN
payload_properties_arcname = Payload.PAYLOAD_PROPERTIES_TXT
# Add the signed payload file and properties into the zip. In order to
# support streaming, we pack them as ZIP_STORED. So these entries can be
# read directly with the offset and length pairs.
common.ZipWrite(output_zip, self.payload_file, arcname=payload_arcname,
compress_type=zipfile.ZIP_STORED)
common.ZipWrite(output_zip, self.payload_properties,
arcname=payload_properties_arcname,
compress_type=zipfile.ZIP_STORED)
def _LoadOemDicts(oem_source):
"""Returns the list of loaded OEM properties dict."""
if not oem_source:
return None
oem_dicts = []
for oem_file in oem_source:
oem_dicts.append(common.LoadDictionaryFromFile(oem_file))
return oem_dicts
class StreamingPropertyFiles(PropertyFiles):
"""A subclass for computing the property-files for streaming A/B OTAs."""
def __init__(self):
super(StreamingPropertyFiles, self).__init__()
self.name = 'ota-streaming-property-files'
self.required = (
# payload.bin and payload_properties.txt must exist.
'payload.bin',
'payload_properties.txt',
)
self.optional = (
# apex_info.pb isn't directly used in the update flow
'apex_info.pb',
# care_map is available only if dm-verity is enabled.
'care_map.pb',
'care_map.txt',
# compatibility.zip is available only if target supports Treble.
'compatibility.zip',
)
class AbOtaPropertyFiles(StreamingPropertyFiles):
"""The property-files for A/B OTA that includes payload_metadata.bin info.
Since P, we expose one more token (aka property-file), in addition to the ones
for streaming A/B OTA, for a virtual entry of 'payload_metadata.bin'.
'payload_metadata.bin' is the header part of a payload ('payload.bin'), which
doesn't exist as a separate ZIP entry, but can be used to verify if the
payload can be applied on the given device.
For backward compatibility, we keep both of the 'ota-streaming-property-files'
and the newly added 'ota-property-files' in P. The new token will only be
available in 'ota-property-files'.
"""
def __init__(self):
super(AbOtaPropertyFiles, self).__init__()
self.name = 'ota-property-files'
def _GetPrecomputed(self, input_zip):
offset, size = self._GetPayloadMetadataOffsetAndSize(input_zip)
return ['payload_metadata.bin:{}:{}'.format(offset, size)]
@staticmethod
def _GetPayloadMetadataOffsetAndSize(input_zip):
"""Computes the offset and size of the payload metadata for a given package.
(From system/update_engine/update_metadata.proto)
A delta update file contains all the deltas needed to update a system from
one specific version to another specific version. The update format is
represented by this struct pseudocode:
struct delta_update_file {
char magic[4] = "CrAU";
uint64 file_format_version;
uint64 manifest_size; // Size of protobuf DeltaArchiveManifest
// Only present if format_version > 1:
uint32 metadata_signature_size;
// The Bzip2 compressed DeltaArchiveManifest
char manifest[metadata_signature_size];
// The signature of the metadata (from the beginning of the payload up to
// this location, not including the signature itself). This is a
// serialized Signatures message.
char medatada_signature_message[metadata_signature_size];
// Data blobs for files, no specific format. The specific offset
// and length of each data blob is recorded in the DeltaArchiveManifest.
struct {
char data[];
} blobs[];
// These two are not signed:
uint64 payload_signatures_message_size;
char payload_signatures_message[];
};
'payload-metadata.bin' contains all the bytes from the beginning of the
payload, till the end of 'medatada_signature_message'.
"""
payload_info = input_zip.getinfo('payload.bin')
(payload_offset, payload_size) = GetZipEntryOffset(input_zip, payload_info)
# Read the underlying raw zipfile at specified offset
payload_fp = input_zip.fp
payload_fp.seek(payload_offset)
header_bin = payload_fp.read(24)
# network byte order (big-endian)
header = struct.unpack("!IQQL", header_bin)
# 'CrAU'
magic = header[0]
assert magic == 0x43724155, "Invalid magic: {:x}, computed offset {}" \
.format(magic, payload_offset)
manifest_size = header[2]
metadata_signature_size = header[3]
metadata_total = 24 + manifest_size + metadata_signature_size
assert metadata_total < payload_size
return (payload_offset, metadata_total)
def ModifyVABCCompressionParam(content, algo):
""" Update update VABC Compression Param in dynamic_partitions_info.txt
Args:
content: The string content of dynamic_partitions_info.txt
algo: The compression algorithm should be used for VABC. See
https://cs.android.com/android/platform/superproject/+/master:system/core/fs_mgr/libsnapshot/cow_writer.cpp;l=127;bpv=1;bpt=1?q=CowWriter::ParseOptions&sq=
Returns:
Updated content of dynamic_partitions_info.txt , with custom compression algo
"""
output_list = []
for line in content.splitlines():
if line.startswith("virtual_ab_compression_method="):
continue
output_list.append(line)
output_list.append("virtual_ab_compression_method="+algo)
return "\n".join(output_list)
def UpdatesInfoForSpecialUpdates(content, partitions_filter,
delete_keys=None):
""" Updates info file for secondary payload generation, partial update, etc.
Scan each line in the info file, and remove the unwanted partitions from
the dynamic partition list in the related properties. e.g.
"super_google_dynamic_partitions_partition_list=system vendor product"
will become "super_google_dynamic_partitions_partition_list=system".
Args:
content: The content of the input info file. e.g. misc_info.txt.
partitions_filter: A function to filter the desired partitions from a given
list
delete_keys: A list of keys to delete in the info file
Returns:
A string of the updated info content.
"""
output_list = []
# The suffix in partition_list variables that follows the name of the
# partition group.
list_suffix = 'partition_list'
for line in content.splitlines():
if line.startswith('#') or '=' not in line:
output_list.append(line)
continue
key, value = line.strip().split('=', 1)
if delete_keys and key in delete_keys:
pass
elif key.endswith(list_suffix):
partitions = value.split()
# TODO for partial update, partitions in the same group must be all
# updated or all omitted
partitions = filter(partitions_filter, partitions)
output_list.append('{}={}'.format(key, ' '.join(partitions)))
else:
output_list.append(line)
return '\n'.join(output_list)
def GetTargetFilesZipForSecondaryImages(input_file, skip_postinstall=False):
"""Returns a target-files.zip file for generating secondary payload.
Although the original target-files.zip already contains secondary slot
images (i.e. IMAGES/system_other.img), we need to rename the files to the
ones without _other suffix. Note that we cannot instead modify the names in
META/ab_partitions.txt, because there are no matching partitions on device.
For the partitions that don't have secondary images, the ones for primary
slot will be used. This is to ensure that we always have valid boot, vbmeta,
bootloader images in the inactive slot.
Args:
input_file: The input target-files.zip file.
skip_postinstall: Whether to skip copying the postinstall config file.
Returns:
The filename of the target-files.zip for generating secondary payload.
"""
def GetInfoForSecondaryImages(info_file):
"""Updates info file for secondary payload generation."""
with open(info_file) as f:
content = f.read()
# Remove virtual_ab flag from secondary payload so that OTA client
# don't use snapshots for secondary update
delete_keys = ['virtual_ab', "virtual_ab_retrofit"]
return UpdatesInfoForSpecialUpdates(
content, lambda p: p not in SECONDARY_PAYLOAD_SKIPPED_IMAGES,
delete_keys)
target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
target_zip = zipfile.ZipFile(target_file, 'w', allowZip64=True)
with zipfile.ZipFile(input_file, 'r', allowZip64=True) as input_zip:
infolist = input_zip.infolist()
input_tmp = common.UnzipTemp(input_file, UNZIP_PATTERN)
for info in infolist:
unzipped_file = os.path.join(input_tmp, *info.filename.split('/'))
if info.filename == 'IMAGES/system_other.img':
common.ZipWrite(target_zip, unzipped_file, arcname='IMAGES/system.img')
# Primary images and friends need to be skipped explicitly.
elif info.filename in ('IMAGES/system.img',
'IMAGES/system.map'):
pass
# Copy images that are not in SECONDARY_PAYLOAD_SKIPPED_IMAGES.
elif info.filename.startswith(('IMAGES/', 'RADIO/')):
image_name = os.path.basename(info.filename)
if image_name not in ['{}.img'.format(partition) for partition in
SECONDARY_PAYLOAD_SKIPPED_IMAGES]:
common.ZipWrite(target_zip, unzipped_file, arcname=info.filename)
# Skip copying the postinstall config if requested.
elif skip_postinstall and info.filename == POSTINSTALL_CONFIG:
pass
elif info.filename.startswith('META/'):
# Remove the unnecessary partitions for secondary images from the
# ab_partitions file.
if info.filename == AB_PARTITIONS:
with open(unzipped_file) as f:
partition_list = f.read().splitlines()
partition_list = [partition for partition in partition_list if partition
and partition not in SECONDARY_PAYLOAD_SKIPPED_IMAGES]
common.ZipWriteStr(target_zip, info.filename,
'\n'.join(partition_list))
# Remove the unnecessary partitions from the dynamic partitions list.
elif (info.filename == 'META/misc_info.txt' or
info.filename == DYNAMIC_PARTITION_INFO):
modified_info = GetInfoForSecondaryImages(unzipped_file)
common.ZipWriteStr(target_zip, info.filename, modified_info)
else:
common.ZipWrite(target_zip, unzipped_file, arcname=info.filename)
common.ZipClose(target_zip)
return target_file
def GetTargetFilesZipWithoutPostinstallConfig(input_file):
"""Returns a target-files.zip that's not containing postinstall_config.txt.
This allows brillo_update_payload script to skip writing all the postinstall
hooks in the generated payload. The input target-files.zip file will be
duplicated, with 'META/postinstall_config.txt' skipped. If input_file doesn't
contain the postinstall_config.txt entry, the input file will be returned.
Args:
input_file: The input target-files.zip filename.
Returns:
The filename of target-files.zip that doesn't contain postinstall config.
"""
# We should only make a copy if postinstall_config entry exists.
with zipfile.ZipFile(input_file, 'r', allowZip64=True) as input_zip:
if POSTINSTALL_CONFIG not in input_zip.namelist():
return input_file
target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
shutil.copyfile(input_file, target_file)
common.ZipDelete(target_file, POSTINSTALL_CONFIG)
return target_file
def ParseInfoDict(target_file_path):
with zipfile.ZipFile(target_file_path, 'r', allowZip64=True) as zfp:
return common.LoadInfoDict(zfp)
def GetTargetFilesZipForCustomVABCCompression(input_file, vabc_compression_param):
"""Returns a target-files.zip with a custom VABC compression param.
Args:
input_file: The input target-files.zip path
vabc_compression_param: Custom Virtual AB Compression algorithm
Returns:
The path to modified target-files.zip
"""
target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
shutil.copyfile(input_file, target_file)
common.ZipDelete(target_file, DYNAMIC_PARTITION_INFO)
with zipfile.ZipFile(input_file, 'r', allowZip64=True) as zfp:
dynamic_partition_info = zfp.read(DYNAMIC_PARTITION_INFO).decode()
dynamic_partition_info = ModifyVABCCompressionParam(
dynamic_partition_info, vabc_compression_param)
with zipfile.ZipFile(target_file, "a", allowZip64=True) as output_zip:
output_zip.writestr(DYNAMIC_PARTITION_INFO, dynamic_partition_info)
return target_file
def GetTargetFilesZipForPartialUpdates(input_file, ab_partitions):
"""Returns a target-files.zip for partial ota update package generation.
This function modifies ab_partitions list with the desired partitions before
calling the brillo_update_payload script. It also cleans up the reference to
the excluded partitions in the info file, e.g misc_info.txt.
Args:
input_file: The input target-files.zip filename.
ab_partitions: A list of partitions to include in the partial update
Returns:
The filename of target-files.zip used for partial ota update.
"""
def AddImageForPartition(partition_name):
"""Add the archive name for a given partition to the copy list."""
for prefix in ['IMAGES', 'RADIO']:
image_path = '{}/{}.img'.format(prefix, partition_name)
if image_path in namelist:
copy_entries.append(image_path)
map_path = '{}/{}.map'.format(prefix, partition_name)
if map_path in namelist:
copy_entries.append(map_path)
return
raise ValueError("Cannot find {} in input zipfile".format(partition_name))
with zipfile.ZipFile(input_file, allowZip64=True) as input_zip:
original_ab_partitions = input_zip.read(
AB_PARTITIONS).decode().splitlines()
namelist = input_zip.namelist()
unrecognized_partitions = [partition for partition in ab_partitions if
partition not in original_ab_partitions]
if unrecognized_partitions:
raise ValueError("Unrecognized partitions when generating partial updates",
unrecognized_partitions)
logger.info("Generating partial updates for %s", ab_partitions)
copy_entries = ['META/update_engine_config.txt']
for partition_name in ab_partitions:
AddImageForPartition(partition_name)
# Use zip2zip to avoid extracting the zipfile.
partial_target_file = common.MakeTempFile(suffix='.zip')
cmd = ['zip2zip', '-i', input_file, '-o', partial_target_file]
cmd.extend(['{}:{}'.format(name, name) for name in copy_entries])
common.RunAndCheckOutput(cmd)
partial_target_zip = zipfile.ZipFile(partial_target_file, 'a',
allowZip64=True)
with zipfile.ZipFile(input_file, allowZip64=True) as input_zip:
common.ZipWriteStr(partial_target_zip, 'META/ab_partitions.txt',
'\n'.join(ab_partitions))
CARE_MAP_ENTRY = "META/care_map.pb"
if CARE_MAP_ENTRY in input_zip.namelist():
caremap = care_map_pb2.CareMap()
caremap.ParseFromString(input_zip.read(CARE_MAP_ENTRY))
filtered = [
part for part in caremap.partitions if part.name in ab_partitions]
del caremap.partitions[:]
caremap.partitions.extend(filtered)
common.ZipWriteStr(partial_target_zip, CARE_MAP_ENTRY,
caremap.SerializeToString())
for info_file in ['META/misc_info.txt', DYNAMIC_PARTITION_INFO]:
if info_file not in input_zip.namelist():
logger.warning('Cannot find %s in input zipfile', info_file)
continue
content = input_zip.read(info_file).decode()
modified_info = UpdatesInfoForSpecialUpdates(
content, lambda p: p in ab_partitions)
if OPTIONS.vabc_compression_param and info_file == DYNAMIC_PARTITION_INFO:
modified_info = ModifyVABCCompressionParam(
modified_info, OPTIONS.vabc_compression_param)
common.ZipWriteStr(partial_target_zip, info_file, modified_info)
# TODO(xunchang) handle META/postinstall_config.txt'
common.ZipClose(partial_target_zip)
return partial_target_file
def GetTargetFilesZipForRetrofitDynamicPartitions(input_file,
super_block_devices,
dynamic_partition_list):
"""Returns a target-files.zip for retrofitting dynamic partitions.
This allows brillo_update_payload to generate an OTA based on the exact
bits on the block devices. Postinstall is disabled.
Args:
input_file: The input target-files.zip filename.
super_block_devices: The list of super block devices
dynamic_partition_list: The list of dynamic partitions
Returns:
The filename of target-files.zip with *.img replaced with super_*.img for
each block device in super_block_devices.
"""
assert super_block_devices, "No super_block_devices are specified."
replace = {'OTA/super_{}.img'.format(dev): 'IMAGES/{}.img'.format(dev)
for dev in super_block_devices}
target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
shutil.copyfile(input_file, target_file)
with zipfile.ZipFile(input_file, allowZip64=True) as input_zip:
namelist = input_zip.namelist()
input_tmp = common.UnzipTemp(input_file, RETROFIT_DAP_UNZIP_PATTERN)
# Remove partitions from META/ab_partitions.txt that is in
# dynamic_partition_list but not in super_block_devices so that
# brillo_update_payload won't generate update for those logical partitions.
ab_partitions_file = os.path.join(input_tmp, *AB_PARTITIONS.split('/'))
with open(ab_partitions_file) as f:
ab_partitions_lines = f.readlines()
ab_partitions = [line.strip() for line in ab_partitions_lines]
# Assert that all super_block_devices are in ab_partitions
super_device_not_updated = [partition for partition in super_block_devices
if partition not in ab_partitions]
assert not super_device_not_updated, \
"{} is in super_block_devices but not in {}".format(
super_device_not_updated, AB_PARTITIONS)
# ab_partitions -= (dynamic_partition_list - super_block_devices)
new_ab_partitions = common.MakeTempFile(
prefix="ab_partitions", suffix=".txt")
with open(new_ab_partitions, 'w') as f:
for partition in ab_partitions:
if (partition in dynamic_partition_list and
partition not in super_block_devices):
logger.info("Dropping %s from ab_partitions.txt", partition)
continue
f.write(partition + "\n")
to_delete = [AB_PARTITIONS]
# Always skip postinstall for a retrofit update.
to_delete += [POSTINSTALL_CONFIG]
# Delete dynamic_partitions_info.txt so that brillo_update_payload thinks this
# is a regular update on devices without dynamic partitions support.
to_delete += [DYNAMIC_PARTITION_INFO]
# Remove the existing partition images as well as the map files.
to_delete += list(replace.values())
to_delete += ['IMAGES/{}.map'.format(dev) for dev in super_block_devices]
common.ZipDelete(target_file, to_delete)
target_zip = zipfile.ZipFile(target_file, 'a', allowZip64=True)
# Write super_{foo}.img as {foo}.img.
for src, dst in replace.items():
assert src in namelist, \
'Missing {} in {}; {} cannot be written'.format(src, input_file, dst)
unzipped_file = os.path.join(input_tmp, *src.split('/'))
common.ZipWrite(target_zip, unzipped_file, arcname=dst)
# Write new ab_partitions.txt file
common.ZipWrite(target_zip, new_ab_partitions, arcname=AB_PARTITIONS)
common.ZipClose(target_zip)
return target_file
def GetTargetFilesZipForCustomImagesUpdates(input_file, custom_images):
"""Returns a target-files.zip for custom partitions update.
This function modifies ab_partitions list with the desired custom partitions
and puts the custom images into the target target-files.zip.
Args:
input_file: The input target-files.zip filename.
custom_images: A map of custom partitions and custom images.
Returns:
The filename of a target-files.zip which has renamed the custom images in
the IMAGS/ to their partition names.
"""
# Use zip2zip to avoid extracting the zipfile.
target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
cmd = ['zip2zip', '-i', input_file, '-o', target_file]
with zipfile.ZipFile(input_file, allowZip64=True) as input_zip:
namelist = input_zip.namelist()
# Write {custom_image}.img as {custom_partition}.img.
for custom_partition, custom_image in custom_images.items():
default_custom_image = '{}.img'.format(custom_partition)
if default_custom_image != custom_image:
logger.info("Update custom partition '%s' with '%s'",
custom_partition, custom_image)
# Default custom image need to be deleted first.
namelist.remove('IMAGES/{}'.format(default_custom_image))
# IMAGES/{custom_image}.img:IMAGES/{custom_partition}.img.
cmd.extend(['IMAGES/{}:IMAGES/{}'.format(custom_image,
default_custom_image)])
cmd.extend(['{}:{}'.format(name, name) for name in namelist])
common.RunAndCheckOutput(cmd)
return target_file
def GeneratePartitionTimestampFlags(partition_state):
partition_timestamps = [
part.partition_name + ":" + part.version
for part in partition_state]
return ["--partition_timestamps", ",".join(partition_timestamps)]
def GeneratePartitionTimestampFlagsDowngrade(
pre_partition_state, post_partition_state):
assert pre_partition_state is not None
partition_timestamps = {}
for part in pre_partition_state:
partition_timestamps[part.partition_name] = part.version
for part in post_partition_state:
partition_timestamps[part.partition_name] = \
max(part.version, partition_timestamps[part.partition_name])
return [
"--partition_timestamps",
",".join([key + ":" + val for (key, val)
in partition_timestamps.items()])
]
def SupportsMainlineGkiUpdates(target_file):
"""Return True if the build supports MainlineGKIUpdates.
This function scans the product.img file in IMAGES/ directory for
pattern |*/apex/com.android.gki.*.apex|. If there are files
matching this pattern, conclude that build supports mainline
GKI and return True
Args:
target_file: Path to a target_file.zip, or an extracted directory
Return:
True if thisb uild supports Mainline GKI Updates.
"""
if target_file is None:
return False
if os.path.isfile(target_file):
target_file = common.UnzipTemp(target_file, ["IMAGES/product.img"])
if not os.path.isdir(target_file):
assert os.path.isdir(target_file), \
"{} must be a path to zip archive or dir containing extracted"\
" target_files".format(target_file)
image_file = os.path.join(target_file, "IMAGES", "product.img")
if not os.path.isfile(image_file):
return False
if IsSparseImage(image_file):
# Unsparse the image
tmp_img = common.MakeTempFile(suffix=".img")
subprocess.check_output(["simg2img", image_file, tmp_img])
image_file = tmp_img
cmd = ["debugfs_static", "-R", "ls -p /apex", image_file]
output = subprocess.check_output(cmd).decode()
pattern = re.compile(r"com\.android\.gki\..*\.apex")
return pattern.search(output) is not None
def GenerateAbOtaPackage(target_file, output_file, source_file=None):
"""Generates an Android OTA package that has A/B update payload."""
# Stage the output zip package for package signing.
if not OPTIONS.no_signing:
staging_file = common.MakeTempFile(suffix='.zip')
else:
staging_file = output_file
output_zip = zipfile.ZipFile(staging_file, "w",
compression=zipfile.ZIP_DEFLATED,
allowZip64=True)
if source_file is not None:
assert "ab_partitions" in OPTIONS.source_info_dict, \
"META/ab_partitions.txt is required for ab_update."
assert "ab_partitions" in OPTIONS.target_info_dict, \
"META/ab_partitions.txt is required for ab_update."
target_info = common.BuildInfo(OPTIONS.target_info_dict, OPTIONS.oem_dicts)
source_info = common.BuildInfo(OPTIONS.source_info_dict, OPTIONS.oem_dicts)
# If source supports VABC, delta_generator/update_engine will attempt to
# use VABC. This dangerous, as the target build won't have snapuserd to
# serve I/O request when device boots. Therefore, disable VABC if source
# build doesn't supports it.
if not source_info.is_vabc or not target_info.is_vabc:
logger.info("Either source or target does not support VABC, disabling.")
OPTIONS.disable_vabc = True
else:
assert "ab_partitions" in OPTIONS.info_dict, \
"META/ab_partitions.txt is required for ab_update."
target_info = common.BuildInfo(OPTIONS.info_dict, OPTIONS.oem_dicts)
source_info = None
if target_info.vendor_suppressed_vabc:
logger.info("Vendor suppressed VABC. Disabling")
OPTIONS.disable_vabc = True
# Both source and target build need to support VABC XOR for us to use it.
# Source build's update_engine must be able to write XOR ops, and target
# build's snapuserd must be able to interpret XOR ops.
if not target_info.is_vabc_xor or OPTIONS.disable_vabc or \
(source_info is not None and not source_info.is_vabc_xor):
logger.info("VABC XOR Not supported, disabling")
OPTIONS.enable_vabc_xor = False
additional_args = []
# Prepare custom images.
if OPTIONS.custom_images:
target_file = GetTargetFilesZipForCustomImagesUpdates(
target_file, OPTIONS.custom_images)
if OPTIONS.retrofit_dynamic_partitions:
target_file = GetTargetFilesZipForRetrofitDynamicPartitions(
target_file, target_info.get("super_block_devices").strip().split(),
target_info.get("dynamic_partition_list").strip().split())
elif OPTIONS.partial:
target_file = GetTargetFilesZipForPartialUpdates(target_file,
OPTIONS.partial)
additional_args += ["--is_partial_update", "true"]
elif OPTIONS.vabc_compression_param:
target_file = GetTargetFilesZipForCustomVABCCompression(
target_file, OPTIONS.vabc_compression_param)
elif OPTIONS.skip_postinstall:
target_file = GetTargetFilesZipWithoutPostinstallConfig(target_file)
# Target_file may have been modified, reparse ab_partitions
with zipfile.ZipFile(target_file, allowZip64=True) as zfp:
target_info.info_dict['ab_partitions'] = zfp.read(
AB_PARTITIONS).decode().strip().split("\n")
CheckVintfIfTrebleEnabled(target_file, target_info)
# Metadata to comply with Android OTA package format.
metadata = GetPackageMetadata(target_info, source_info)
# Generate payload.
payload = Payload()
partition_timestamps_flags = []
# Enforce a max timestamp this payload can be applied on top of.
if OPTIONS.downgrade:
max_timestamp = source_info.GetBuildProp("ro.build.date.utc")
partition_timestamps_flags = GeneratePartitionTimestampFlagsDowngrade(
metadata.precondition.partition_state,
metadata.postcondition.partition_state
)
else:
max_timestamp = str(metadata.postcondition.timestamp)
partition_timestamps_flags = GeneratePartitionTimestampFlags(
metadata.postcondition.partition_state)
if not ota_utils.IsZucchiniCompatible(source_file, target_file):
OPTIONS.enable_zucchini = False
additional_args += ["--enable_zucchini",
str(OPTIONS.enable_zucchini).lower()]
if not ota_utils.IsLz4diffCompatible(source_file, target_file):
logger.warning(
"Source build doesn't support lz4diff, or source/target don't have compatible lz4diff versions. Disabling lz4diff.")
OPTIONS.enable_lz4diff = False
additional_args += ["--enable_lz4diff",
str(OPTIONS.enable_lz4diff).lower()]
if source_file and OPTIONS.enable_lz4diff:
input_tmp = common.UnzipTemp(source_file, ["META/liblz4.so"])
liblz4_path = os.path.join(input_tmp, "META", "liblz4.so")
assert os.path.exists(
liblz4_path), "liblz4.so not found in META/ dir of target file {}".format(liblz4_path)
logger.info("Enabling lz4diff %s", liblz4_path)
additional_args += ["--liblz4_path", liblz4_path]
erofs_compression_param = OPTIONS.target_info_dict.get(
"erofs_default_compressor")
assert erofs_compression_param is not None, "'erofs_default_compressor' not found in META/misc_info.txt of target build. This is required to enable lz4diff."
additional_args += ["--erofs_compression_param", erofs_compression_param]
if OPTIONS.disable_vabc:
additional_args += ["--disable_vabc", "true"]
if OPTIONS.enable_vabc_xor:
additional_args += ["--enable_vabc_xor", "true"]
if OPTIONS.force_minor_version:
additional_args += ["--force_minor_version", OPTIONS.force_minor_version]
if OPTIONS.compressor_types:
additional_args += ["--compressor_types", OPTIONS.compressor_types]
additional_args += ["--max_timestamp", max_timestamp]
if SupportsMainlineGkiUpdates(source_file):
logger.warning(
"Detected build with mainline GKI, include full boot image.")
additional_args.extend(["--full_boot", "true"])
payload.Generate(
target_file,
source_file,
additional_args + partition_timestamps_flags
)
# Sign the payload.
payload_signer = PayloadSigner()
payload.Sign(payload_signer)
# Write the payload into output zip.
payload.WriteToZip(output_zip)
# Generate and include the secondary payload that installs secondary images
# (e.g. system_other.img).
if OPTIONS.include_secondary:
# We always include a full payload for the secondary slot, even when
# building an incremental OTA. See the comments for "--include_secondary".
secondary_target_file = GetTargetFilesZipForSecondaryImages(
target_file, OPTIONS.skip_postinstall)
secondary_payload = Payload(secondary=True)
secondary_payload.Generate(secondary_target_file,
additional_args=["--max_timestamp",
max_timestamp])
secondary_payload.Sign(payload_signer)
secondary_payload.WriteToZip(output_zip)
# If dm-verity is supported for the device, copy contents of care_map
# into A/B OTA package.
target_zip = zipfile.ZipFile(target_file, "r", allowZip64=True)
if (target_info.get("verity") == "true" or
target_info.get("avb_enable") == "true"):
care_map_list = [x for x in ["care_map.pb", "care_map.txt"] if
"META/" + x in target_zip.namelist()]
# Adds care_map if either the protobuf format or the plain text one exists.
if care_map_list:
care_map_name = care_map_list[0]
care_map_data = target_zip.read("META/" + care_map_name)
# In order to support streaming, care_map needs to be packed as
# ZIP_STORED.
common.ZipWriteStr(output_zip, care_map_name, care_map_data,
compress_type=zipfile.ZIP_STORED)
else:
logger.warning("Cannot find care map file in target_file package")
# Add the source apex version for incremental ota updates, and write the
# result apex info to the ota package.
ota_apex_info = ota_utils.ConstructOtaApexInfo(target_zip, source_file)
if ota_apex_info is not None:
common.ZipWriteStr(output_zip, "apex_info.pb", ota_apex_info,
compress_type=zipfile.ZIP_STORED)
common.ZipClose(target_zip)
# We haven't written the metadata entry yet, which will be handled in
# FinalizeMetadata().
common.ZipClose(output_zip)
# AbOtaPropertyFiles intends to replace StreamingPropertyFiles, as it covers
# all the info of the latter. However, system updaters and OTA servers need to
# take time to switch to the new flag. We keep both of the flags for
# P-timeframe, and will remove StreamingPropertyFiles in later release.
needed_property_files = (
AbOtaPropertyFiles(),
StreamingPropertyFiles(),
)
FinalizeMetadata(metadata, staging_file, output_file, needed_property_files)
def main(argv):
def option_handler(o, a):
if o in ("-k", "--package_key"):
OPTIONS.package_key = a
elif o in ("-i", "--incremental_from"):
OPTIONS.incremental_source = a
elif o == "--full_radio":
OPTIONS.full_radio = True
elif o == "--full_bootloader":
OPTIONS.full_bootloader = True
elif o == "--wipe_user_data":
OPTIONS.wipe_user_data = True
elif o == "--downgrade":
OPTIONS.downgrade = True
OPTIONS.wipe_user_data = True
elif o == "--override_timestamp":
OPTIONS.downgrade = True
elif o in ("-o", "--oem_settings"):
OPTIONS.oem_source = a.split(',')
elif o == "--oem_no_mount":
OPTIONS.oem_no_mount = True
elif o in ("-e", "--extra_script"):
OPTIONS.extra_script = a
elif o in ("-t", "--worker_threads"):
if a.isdigit():
OPTIONS.worker_threads = int(a)
else:
raise ValueError("Cannot parse value %r for option %r - only "
"integers are allowed." % (a, o))
elif o in ("-2", "--two_step"):
OPTIONS.two_step = True
elif o == "--include_secondary":
OPTIONS.include_secondary = True
elif o == "--no_signing":
OPTIONS.no_signing = True
elif o == "--verify":
OPTIONS.verify = True
elif o == "--block":
OPTIONS.block_based = True
elif o in ("-b", "--binary"):
OPTIONS.updater_binary = a
elif o == "--stash_threshold":
try:
OPTIONS.stash_threshold = float(a)
except ValueError:
raise ValueError("Cannot parse value %r for option %r - expecting "
"a float" % (a, o))
elif o == "--log_diff":
OPTIONS.log_diff = a
elif o == "--payload_signer":
OPTIONS.payload_signer = a
elif o == "--payload_signer_args":
OPTIONS.payload_signer_args = shlex.split(a)
elif o == "--payload_signer_maximum_signature_size":
OPTIONS.payload_signer_maximum_signature_size = a
elif o == "--payload_signer_key_size":
# TODO(Xunchang) remove this option after cleaning up the callers.
logger.warning("The option '--payload_signer_key_size' is deprecated."
" Use '--payload_signer_maximum_signature_size' instead.")
OPTIONS.payload_signer_maximum_signature_size = a
elif o == "--extracted_input_target_files":
OPTIONS.extracted_input = a
elif o == "--skip_postinstall":
OPTIONS.skip_postinstall = True
elif o == "--retrofit_dynamic_partitions":
OPTIONS.retrofit_dynamic_partitions = True
elif o == "--skip_compatibility_check":
OPTIONS.skip_compatibility_check = True
elif o == "--output_metadata_path":
OPTIONS.output_metadata_path = a
elif o == "--disable_fec_computation":
OPTIONS.disable_fec_computation = True
elif o == "--disable_verity_computation":
OPTIONS.disable_verity_computation = True
elif o == "--force_non_ab":
OPTIONS.force_non_ab = True
elif o == "--boot_variable_file":
OPTIONS.boot_variable_file = a
elif o == "--partial":
partitions = a.split()
if not partitions:
raise ValueError("Cannot parse partitions in {}".format(a))
OPTIONS.partial = partitions
elif o == "--custom_image":
custom_partition, custom_image = a.split("=")
OPTIONS.custom_images[custom_partition] = custom_image
elif o == "--disable_vabc":
OPTIONS.disable_vabc = True
elif o == "--spl_downgrade":
OPTIONS.spl_downgrade = True
OPTIONS.wipe_user_data = True
elif o == "--vabc_downgrade":
OPTIONS.vabc_downgrade = True
elif o == "--enable_vabc_xor":
assert a.lower() in ["true", "false"]
OPTIONS.enable_vabc_xor = a.lower() != "false"
elif o == "--force_minor_version":
OPTIONS.force_minor_version = a
elif o == "--compressor_types":
OPTIONS.compressor_types = a
elif o == "--enable_zucchini":
assert a.lower() in ["true", "false"]
OPTIONS.enable_zucchini = a.lower() != "false"
elif o == "--enable_lz4diff":
assert a.lower() in ["true", "false"]
OPTIONS.enable_lz4diff = a.lower() != "false"
elif o == "--vabc_compression_param":
OPTIONS.vabc_compression_param = a.lower()
else:
return False
return True
args = common.ParseOptions(argv, __doc__,
extra_opts="b:k:i:d:e:t:2o:",
extra_long_opts=[
"package_key=",
"incremental_from=",
"full_radio",
"full_bootloader",
"wipe_user_data",
"downgrade",
"override_timestamp",
"extra_script=",
"worker_threads=",
"two_step",
"include_secondary",
"no_signing",
"block",
"binary=",
"oem_settings=",
"oem_no_mount",
"verify",
"stash_threshold=",
"log_diff=",
"payload_signer=",
"payload_signer_args=",
"payload_signer_maximum_signature_size=",
"payload_signer_key_size=",
"extracted_input_target_files=",
"skip_postinstall",
"retrofit_dynamic_partitions",
"skip_compatibility_check",
"output_metadata_path=",
"disable_fec_computation",
"disable_verity_computation",
"force_non_ab",
"boot_variable_file=",
"partial=",
"custom_image=",
"disable_vabc",
"spl_downgrade",
"vabc_downgrade",
"enable_vabc_xor=",
"force_minor_version=",
"compressor_types=",
"enable_zucchini=",
"enable_lz4diff=",
"vabc_compression_param=",
], extra_option_handler=option_handler)
if len(args) != 2:
common.Usage(__doc__)
sys.exit(1)
common.InitLogging()
# Load the build info dicts from the zip directly or the extracted input
# directory. We don't need to unzip the entire target-files zips, because they
# won't be needed for A/B OTAs (brillo_update_payload does that on its own).
# When loading the info dicts, we don't need to provide the second parameter
# to common.LoadInfoDict(). Specifying the second parameter allows replacing
# some properties with their actual paths, such as 'selinux_fc',
# 'ramdisk_dir', which won't be used during OTA generation.
if OPTIONS.extracted_input is not None:
OPTIONS.info_dict = common.LoadInfoDict(OPTIONS.extracted_input)
else:
OPTIONS.info_dict = ParseInfoDict(args[0])
if OPTIONS.wipe_user_data:
if not OPTIONS.vabc_downgrade:
logger.info("Detected downgrade/datawipe OTA."
"When wiping userdata, VABC OTA makes the user "
"wait in recovery mode for merge to finish. Disable VABC by "
"default. If you really want to do VABC downgrade, pass "
"--vabc_downgrade")
OPTIONS.disable_vabc = True
# We should only allow downgrading incrementals (as opposed to full).
# Otherwise the device may go back from arbitrary build with this full
# OTA package.
if OPTIONS.incremental_source is None and OPTIONS.downgrade:
raise ValueError("Cannot generate downgradable full OTAs")
# TODO(xunchang) for retrofit and partial updates, maybe we should rebuild the
# target-file and reload the info_dict. So the info will be consistent with
# the modified target-file.
logger.info("--- target info ---")
common.DumpInfoDict(OPTIONS.info_dict)
# Load the source build dict if applicable.
if OPTIONS.incremental_source is not None:
OPTIONS.target_info_dict = OPTIONS.info_dict
OPTIONS.source_info_dict = ParseInfoDict(OPTIONS.incremental_source)
logger.info("--- source info ---")
common.DumpInfoDict(OPTIONS.source_info_dict)
if OPTIONS.partial:
OPTIONS.info_dict['ab_partitions'] = \
list(
set(OPTIONS.info_dict['ab_partitions']) & set(OPTIONS.partial)
)
if OPTIONS.source_info_dict:
OPTIONS.source_info_dict['ab_partitions'] = \
list(
set(OPTIONS.source_info_dict['ab_partitions']) &
set(OPTIONS.partial)
)
# Load OEM dicts if provided.
OPTIONS.oem_dicts = _LoadOemDicts(OPTIONS.oem_source)
# Assume retrofitting dynamic partitions when base build does not set
# use_dynamic_partitions but target build does.
if (OPTIONS.source_info_dict and
OPTIONS.source_info_dict.get("use_dynamic_partitions") != "true" and
OPTIONS.target_info_dict.get("use_dynamic_partitions") == "true"):
if OPTIONS.target_info_dict.get("dynamic_partition_retrofit") != "true":
raise common.ExternalError(
"Expect to generate incremental OTA for retrofitting dynamic "
"partitions, but dynamic_partition_retrofit is not set in target "
"build.")
logger.info("Implicitly generating retrofit incremental OTA.")
OPTIONS.retrofit_dynamic_partitions = True
# Skip postinstall for retrofitting dynamic partitions.
if OPTIONS.retrofit_dynamic_partitions:
OPTIONS.skip_postinstall = True
ab_update = OPTIONS.info_dict.get("ab_update") == "true"
allow_non_ab = OPTIONS.info_dict.get("allow_non_ab") == "true"
if OPTIONS.force_non_ab:
assert allow_non_ab,\
"--force_non_ab only allowed on devices that supports non-A/B"
assert ab_update, "--force_non_ab only allowed on A/B devices"
generate_ab = not OPTIONS.force_non_ab and ab_update
# Use the default key to sign the package if not specified with package_key.
# package_keys are needed on ab_updates, so always define them if an
# A/B update is getting created.
if not OPTIONS.no_signing or generate_ab:
if OPTIONS.package_key is None:
OPTIONS.package_key = OPTIONS.info_dict.get(
"default_system_dev_certificate",
"build/make/target/product/security/testkey")
# Get signing keys
OPTIONS.key_passwords = common.GetKeyPasswords([OPTIONS.package_key])
# Only check for existence of key file if using the default signer.
# Because the custom signer might not need the key file AT all.
# b/191704641
if not OPTIONS.payload_signer:
private_key_path = OPTIONS.package_key + OPTIONS.private_key_suffix
if not os.path.exists(private_key_path):
raise common.ExternalError(
"Private key {} doesn't exist. Make sure you passed the"
" correct key path through -k option".format(
private_key_path)
)
signapk_abs_path = os.path.join(
OPTIONS.search_path, OPTIONS.signapk_path)
if not os.path.exists(signapk_abs_path):
raise common.ExternalError(
"Failed to find sign apk binary {} in search path {}. Make sure the correct search path is passed via -p".format(OPTIONS.signapk_path, OPTIONS.search_path))
if OPTIONS.source_info_dict:
source_build_prop = OPTIONS.source_info_dict["build.prop"]
target_build_prop = OPTIONS.target_info_dict["build.prop"]
source_spl = source_build_prop.GetProp(SECURITY_PATCH_LEVEL_PROP_NAME)
target_spl = target_build_prop.GetProp(SECURITY_PATCH_LEVEL_PROP_NAME)
is_spl_downgrade = target_spl < source_spl
if is_spl_downgrade and not OPTIONS.spl_downgrade and not OPTIONS.downgrade:
raise common.ExternalError(
"Target security patch level {} is older than source SPL {} applying "
"such OTA will likely cause device fail to boot. Pass --spl_downgrade "
"to override this check. This script expects security patch level to "
"be in format yyyy-mm-dd (e.x. 2021-02-05). It's possible to use "
"separators other than -, so as long as it's used consistenly across "
"all SPL dates".format(target_spl, source_spl))
elif not is_spl_downgrade and OPTIONS.spl_downgrade:
raise ValueError("--spl_downgrade specified but no actual SPL downgrade"
" detected. Please only pass in this flag if you want a"
" SPL downgrade. Target SPL: {} Source SPL: {}"
.format(target_spl, source_spl))
if generate_ab:
GenerateAbOtaPackage(
target_file=args[0],
output_file=args[1],
source_file=OPTIONS.incremental_source)
else:
GenerateNonAbOtaPackage(
target_file=args[0],
output_file=args[1],
source_file=OPTIONS.incremental_source)
# Post OTA generation works.
if OPTIONS.incremental_source is not None and OPTIONS.log_diff:
logger.info("Generating diff logs...")
logger.info("Unzipping target-files for diffing...")
target_dir = common.UnzipTemp(args[0], TARGET_DIFFING_UNZIP_PATTERN)
source_dir = common.UnzipTemp(
OPTIONS.incremental_source, TARGET_DIFFING_UNZIP_PATTERN)
with open(OPTIONS.log_diff, 'w') as out_file:
target_files_diff.recursiveDiff(
'', source_dir, target_dir, out_file)
logger.info("done.")
if __name__ == '__main__':
try:
common.CloseInheritedPipes()
main(sys.argv[1:])
finally:
common.Cleanup()