| # Put some miscellaneous rules here |
| |
| # HACK: clear LOCAL_PATH from including last build target before calling |
| # intermedites-dir-for |
| LOCAL_PATH := $(BUILD_SYSTEM) |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy PRODUCT_COPY_FILES defined by the product. |
| # PRODUCT_COPY_FILES contains words like <source file>:<dest file>[:<owner>]. |
| # <dest file> is relative to $(PRODUCT_OUT), so it should look like, |
| # e.g., "system/etc/file.xml". |
| # The filter part means "only eval the copy-one-file rule if this |
| # src:dest pair is the first one to match the same dest" |
| #$(1): the src:dest pair |
| #$(2): the dest |
| define check-product-copy-files |
| $(if $(filter-out $(TARGET_COPY_OUT_SYSTEM_OTHER)/%,$(2)), \ |
| $(if $(filter %.apk, $(2)),$(error \ |
| Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!))) \ |
| $(if $(filter true,$(BUILD_BROKEN_VINTF_PRODUCT_COPY_FILES)),, \ |
| $(if $(filter $(TARGET_COPY_OUT_SYSTEM)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_SYSTEM)/manifest.xml \ |
| $(TARGET_COPY_OUT_SYSTEM)/compatibility_matrix.xml,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), use vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_PRODUCT)/etc/vintf/%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use PRODUCT_MANIFEST_FILES / DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE / vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_SYSTEM_EXT)/etc/vintf/%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_VENDOR)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_VENDOR)/manifest.xml \ |
| $(TARGET_COPY_OUT_VENDOR)/compatibility_matrix.xml,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use DEVICE_MANIFEST_FILE / DEVICE_MATRIX_FILE / vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_ODM)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_ODM)/etc/manifest%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use ODM_MANIFEST_FILES / vintf_fragments instead!)) \ |
| ) |
| endef |
| |
| # Phony target to check PRODUCT_COPY_FILES copy pairs don't contain ELF files |
| .PHONY: check-elf-prebuilt-product-copy-files |
| check-elf-prebuilt-product-copy-files: |
| |
| check_elf_prebuilt_product_copy_files := true |
| ifneq (,$(filter true,$(BUILD_BROKEN_ELF_PREBUILT_PRODUCT_COPY_FILES))) |
| check_elf_prebuilt_product_copy_files := |
| endif |
| check_elf_prebuilt_product_copy_files_hint := \ |
| found ELF prebuilt in PRODUCT_COPY_FILES, use cc_prebuilt_binary / cc_prebuilt_library_shared instead. |
| |
| # filter out the duplicate <source file>:<dest file> pairs. |
| unique_product_copy_files_pairs := |
| $(foreach cf,$(PRODUCT_COPY_FILES), \ |
| $(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\ |
| $(eval unique_product_copy_files_pairs += $(cf)))) |
| unique_product_copy_files_destinations := |
| product_copy_files_ignored := |
| $(foreach cf,$(unique_product_copy_files_pairs), \ |
| $(eval _src := $(call word-colon,1,$(cf))) \ |
| $(eval _dest := $(call word-colon,2,$(cf))) \ |
| $(call check-product-copy-files,$(cf),$(_dest)) \ |
| $(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \ |
| $(eval product_copy_files_ignored += $(cf)), \ |
| $(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \ |
| $(if $(filter %.xml,$(_dest)),\ |
| $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\ |
| $(if $(and $(filter %.jar,$(_dest)),$(filter $(basename $(notdir $(_dest))),$(PRODUCT_LOADED_BY_PRIVILEGED_MODULES))),\ |
| $(eval $(call copy-and-uncompress-dexs,$(_src),$(_fulldest))), \ |
| $(if $(filter init%rc,$(notdir $(_dest)))$(filter %/etc/init,$(dir $(_dest))),\ |
| $(eval $(call copy-init-script-file-checked,$(_src),$(_fulldest))),\ |
| $(if $(and $(filter true,$(check_elf_prebuilt_product_copy_files)), \ |
| $(filter bin lib lib64,$(subst /,$(space),$(_dest)))), \ |
| $(eval $(call copy-non-elf-file-checked,$(_src),$(_fulldest),$(check_elf_prebuilt_product_copy_files_hint))), \ |
| $(eval $(call copy-one-file,$(_src),$(_fulldest))))))) \ |
| $(eval unique_product_copy_files_destinations += $(_dest)))) |
| |
| # Dump a list of overriden (and ignored PRODUCT_COPY_FILES entries) |
| pcf_ignored_file := $(PRODUCT_OUT)/product_copy_files_ignored.txt |
| $(pcf_ignored_file): PRIVATE_IGNORED := $(sort $(product_copy_files_ignored)) |
| $(pcf_ignored_file): |
| echo "$(PRIVATE_IGNORED)" | tr " " "\n" >$@ |
| |
| $(call dist-for-goals,droidcore-unbundled,$(pcf_ignored_file):logs/$(notdir $(pcf_ignored_file))) |
| |
| pcf_ignored_file := |
| product_copy_files_ignored := |
| unique_product_copy_files_pairs := |
| unique_product_copy_files_destinations := |
| |
| # ----------------------------------------------------------------- |
| # Returns the max allowed size for an image suitable for hash verification |
| # (e.g., boot.img, recovery.img, etc). |
| # The value 69632 derives from MAX_VBMETA_SIZE + MAX_FOOTER_SIZE in $(AVBTOOL). |
| # $(1): partition size to flash the image |
| define get-hash-image-max-size |
| $(if $(1), \ |
| $(if $(filter true,$(BOARD_AVB_ENABLE)), \ |
| $(eval _hash_meta_size := 69632), \ |
| $(eval _hash_meta_size := 0)) \ |
| $(1)-$(_hash_meta_size)) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy headers defined in copy_headers.mk |
| # If more than one makefile declared a header, print a warning, |
| # then copy the last one defined. This matches the previous make |
| # behavior. |
| has_dup_copy_headers := |
| $(foreach dest,$(ALL_COPIED_HEADERS), \ |
| $(eval _srcs := $(ALL_COPIED_HEADERS.$(dest).SRC)) \ |
| $(eval _src := $(lastword $(_srcs))) \ |
| $(if $(call streq,$(_src),$(_srcs)),, \ |
| $(warning Duplicate header copy: $(dest)) \ |
| $(warning _ Using $(_src)) \ |
| $(warning __ from $(lastword $(ALL_COPIED_HEADERS.$(dest).MAKEFILE))) \ |
| $(eval _makefiles := $$(wordlist 1,$(call int_subtract,$(words $(ALL_COPIED_HEADERS.$(dest).MAKEFILE)),1),$$(ALL_COPIED_HEADERS.$$(dest).MAKEFILE))) \ |
| $(foreach src,$(wordlist 1,$(call int_subtract,$(words $(_srcs)),1),$(_srcs)), \ |
| $(warning _ Ignoring $(src)) \ |
| $(warning __ from $(firstword $(_makefiles))) \ |
| $(eval _makefiles := $$(wordlist 2,9999,$$(_makefiles)))) \ |
| $(eval has_dup_copy_headers := true)) \ |
| $(eval $(call copy-one-header,$(_src),$(dest)))) |
| all_copied_headers: $(ALL_COPIED_HEADERS) |
| |
| ifdef has_dup_copy_headers |
| has_dup_copy_headers := |
| $(error duplicate header copies are no longer allowed. For more information about headers, see: https://android.googlesource.com/platform/build/soong/+/master/docs/best_practices.md#headers) |
| endif |
| |
| $(file >$(PRODUCT_OUT)/.copied_headers_list,$(TARGET_OUT_HEADERS) $(ALL_COPIED_HEADERS)) |
| |
| # ----------------------------------------------------------------- |
| # docs/index.html |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| gen := $(OUT_DOCS)/index.html |
| ALL_DOCS += $(gen) |
| $(gen): frameworks/base/docs/docs-redirect-index.html |
| @mkdir -p $(dir $@) |
| @cp -f $< $@ |
| endif |
| |
| ndk_doxygen_out := $(OUT_NDK_DOCS) |
| ndk_headers := $(SOONG_OUT_DIR)/ndk/sysroot/usr/include |
| ndk_docs_src_dir := frameworks/native/docs |
| ndk_doxyfile := $(ndk_docs_src_dir)/Doxyfile |
| ifneq ($(wildcard $(ndk_docs_src_dir)),) |
| ndk_docs_srcs := $(addprefix $(ndk_docs_src_dir)/,\ |
| $(call find-files-in-subdirs,$(ndk_docs_src_dir),"*",.)) |
| $(ndk_doxygen_out)/index.html: $(ndk_docs_srcs) $(SOONG_OUT_DIR)/ndk.timestamp |
| @mkdir -p $(ndk_doxygen_out) |
| @echo "Generating NDK docs to $(ndk_doxygen_out)" |
| @( cat $(ndk_doxyfile); \ |
| echo "INPUT=$(ndk_headers)"; \ |
| echo "HTML_OUTPUT=$(ndk_doxygen_out)" \ |
| ) | doxygen - |
| |
| # Note: Not a part of the docs target because we don't have doxygen available. |
| # You can run this target locally if you have doxygen installed. |
| ndk-docs: $(ndk_doxygen_out)/index.html |
| .PHONY: ndk-docs |
| endif |
| |
| ifeq ($(HOST_OS),linux) |
| $(call dist-for-goals,sdk,$(API_FINGERPRINT)) |
| endif |
| |
| INSTALLED_RECOVERYIMAGE_TARGET := |
| # Build recovery image if |
| # BUILDING_RECOVERY_IMAGE && !BOARD_USES_RECOVERY_AS_BOOT && !BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT. |
| # If BOARD_USES_RECOVERY_AS_BOOT is true, leave empty because INSTALLED_BOOTIMAGE_TARGET is built |
| # with recovery resources. |
| # If BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT is true, leave empty to build recovery resources |
| # but not the final recovery image. |
| ifdef BUILDING_RECOVERY_IMAGE |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifneq ($(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT),true) |
| INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img |
| endif |
| endif |
| endif |
| |
| include $(BUILD_SYSTEM)/sysprop.mk |
| |
| # ---------------------------------------------------------------- |
| |
| # ----------------------------------------------------------------- |
| # sdk-build.prop |
| # |
| # There are certain things in build.prop that we don't want to |
| # ship with the sdk; remove them. |
| |
| # This must be a list of entire property keys followed by |
| # "=" characters, without any internal spaces. |
| sdk_build_prop_remove := \ |
| ro.build.user= \ |
| ro.build.host= \ |
| ro.product.brand= \ |
| ro.product.manufacturer= \ |
| ro.product.device= |
| # TODO: Remove this soon-to-be obsolete property |
| sdk_build_prop_remove += ro.build.product= |
| INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop |
| $(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) |
| @echo SDK buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) grep -v "$(subst $(space),\|,$(strip \ |
| $(sdk_build_prop_remove)))" $< > $@.tmp |
| $(hide) for x in $(strip $(sdk_build_prop_remove)); do \ |
| echo "$$x"generic >> $@.tmp; done |
| $(hide) mv $@.tmp $@ |
| |
| # ----------------------------------------------------------------- |
| # declare recovery ramdisk files |
| ifeq ($(BUILDING_RECOVERY_IMAGE),true) |
| INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP := $(call intermediates-dir-for,PACKAGING,recovery)/ramdisk_files-timestamp |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Declare vendor ramdisk fragments |
| INTERNAL_VENDOR_RAMDISK_FRAGMENTS := |
| |
| ifeq (true,$(BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT)) |
| ifneq (,$(filter recovery,$(BOARD_VENDOR_RAMDISK_FRAGMENTS))) |
| $(error BOARD_VENDOR_RAMDISK_FRAGMENTS must not contain "recovery" if \ |
| BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT is set) |
| endif |
| INTERNAL_VENDOR_RAMDISK_FRAGMENTS += recovery |
| VENDOR_RAMDISK_FRAGMENT.recovery.STAGING_DIR := $(TARGET_RECOVERY_ROOT_OUT) |
| VENDOR_RAMDISK_FRAGMENT.recovery.FILES := $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| BOARD_VENDOR_RAMDISK_FRAGMENT.recovery.MKBOOTIMG_ARGS += --ramdisk_type RECOVERY |
| .KATI_READONLY := VENDOR_RAMDISK_FRAGMENT.recovery.STAGING_DIR |
| endif |
| |
| # Validation check and assign default --ramdisk_type. |
| $(foreach vendor_ramdisk_fragment,$(BOARD_VENDOR_RAMDISK_FRAGMENTS), \ |
| $(if $(and $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS), \ |
| $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).PREBUILT)), \ |
| $(error Must not specify KERNEL_MODULE_DIRS for prebuilt vendor ramdisk fragment "$(vendor_ramdisk_fragment)": $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS))) \ |
| $(eval VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).STAGING_DIR := $(call intermediates-dir-for,PACKAGING,vendor_ramdisk_fragment-stage-$(vendor_ramdisk_fragment))) \ |
| $(eval VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).FILES :=) \ |
| $(if $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS), \ |
| $(if $(filter --ramdisk_type,$(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS)),, \ |
| $(eval BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS += --ramdisk_type DLKM))) \ |
| ) |
| |
| # Create the "kernel module directory" to "vendor ramdisk fragment" inverse mapping. |
| $(foreach vendor_ramdisk_fragment,$(BOARD_VENDOR_RAMDISK_FRAGMENTS), \ |
| $(foreach kmd,$(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).KERNEL_MODULE_DIRS), \ |
| $(eval kmd_vrf := KERNEL_MODULE_DIR_VENDOR_RAMDISK_FRAGMENT_$(kmd)) \ |
| $(if $($(kmd_vrf)),$(error Kernel module directory "$(kmd)" belongs to multiple vendor ramdisk fragments: "$($(kmd_vrf))" "$(vendor_ramdisk_fragment)", each kernel module directory should belong to exactly one or none vendor ramdisk fragment)) \ |
| $(eval $(kmd_vrf) := $(vendor_ramdisk_fragment)) \ |
| ) \ |
| ) |
| INTERNAL_VENDOR_RAMDISK_FRAGMENTS += $(BOARD_VENDOR_RAMDISK_FRAGMENTS) |
| |
| # Strip the list in case of any whitespace. |
| INTERNAL_VENDOR_RAMDISK_FRAGMENTS := \ |
| $(strip $(INTERNAL_VENDOR_RAMDISK_FRAGMENTS)) |
| |
| # Assign --ramdisk_name for each vendor ramdisk fragment. |
| $(foreach vendor_ramdisk_fragment,$(INTERNAL_VENDOR_RAMDISK_FRAGMENTS), \ |
| $(if $(filter --ramdisk_name,$(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS)), \ |
| $(error Must not specify --ramdisk_name for vendor ramdisk fragment: $(vendor_ramdisk_fragment))) \ |
| $(eval BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS += --ramdisk_name $(vendor_ramdisk_fragment)) \ |
| $(eval .KATI_READONLY := BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS) \ |
| ) |
| |
| # ----------------------------------------------------------------- |
| # kernel modules |
| |
| # Depmod requires a well-formed kernel version so 0.0 is used as a placeholder. |
| DEPMOD_STAGING_SUBDIR :=$= lib/modules/0.0 |
| |
| define copy-and-strip-kernel-module |
| $(2): $(1) |
| $(LLVM_STRIP) -o $(2) --strip-debug $(1) |
| endef |
| |
| # $(1): modules list |
| # $(2): output dir |
| # $(3): mount point |
| # $(4): staging dir |
| # $(5): module load list |
| # $(6): module load list filename |
| # $(7): module archive |
| # $(8): staging dir for stripped modules |
| # $(9): module directory name |
| # Returns a list of src:dest pairs to install the modules using copy-many-files. |
| define build-image-kernel-modules |
| $(if $(9), \ |
| $(eval _dir := $(9)/), \ |
| $(eval _dir :=)) \ |
| $(foreach module,$(1), \ |
| $(eval _src := $(module)) \ |
| $(if $(8), \ |
| $(eval _src := $(8)/$(notdir $(module))) \ |
| $(eval $(call copy-and-strip-kernel-module,$(module),$(_src)))) \ |
| $(_src):$(2)/lib/modules/$(_dir)$(notdir $(module))) \ |
| $(eval $(call build-image-kernel-modules-depmod,$(1),$(3),$(4),$(5),$(6),$(7),$(2),$(9))) \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.dep:$(2)/lib/modules/$(_dir)modules.dep \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.alias:$(2)/lib/modules/$(_dir)modules.alias \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.softdep:$(2)/lib/modules/$(_dir)modules.softdep \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/$(6):$(2)/lib/modules/$(_dir)$(6) |
| endef |
| |
| # $(1): modules list |
| # $(2): mount point |
| # $(3): staging dir |
| # $(4): module load list |
| # $(5): module load list filename |
| # $(6): module archive |
| # $(7): output dir |
| # $(8): module directory name |
| # TODO(b/144844424): If a module archive is being used, this step (which |
| # generates obj/PACKAGING/.../modules.dep) also unzips the module archive into |
| # the output directory. This should be moved to a module with a |
| # LOCAL_POST_INSTALL_CMD so that if modules.dep is removed from the output dir, |
| # the archive modules are restored along with modules.dep. |
| define build-image-kernel-modules-depmod |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: .KATI_IMPLICIT_OUTPUTS := $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.alias $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.softdep $(3)/$(DEPMOD_STAGING_SUBDIR)/$(5) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: $(DEPMOD) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULES := $(strip $(1)) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MOUNT_POINT := $(2) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULE_DIR := $(3)/$(DEPMOD_STAGING_SUBDIR)/$(2)/lib/modules/$(8) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_STAGING_DIR := $(3) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_LOAD_MODULES := $(strip $(4)) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_LOAD_FILE := $(3)/$(DEPMOD_STAGING_SUBDIR)/$(5) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULE_ARCHIVE := $(6) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_OUTPUT_DIR := $(7) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: $(1) $(6) |
| @echo depmod $$(PRIVATE_STAGING_DIR) |
| rm -rf $$(PRIVATE_STAGING_DIR) |
| mkdir -p $$(PRIVATE_MODULE_DIR) |
| $(if $(6),\ |
| unzip -qoDD -d $$(PRIVATE_MODULE_DIR) $$(PRIVATE_MODULE_ARCHIVE); \ |
| mkdir -p $$(PRIVATE_OUTPUT_DIR)/lib; \ |
| cp -r $(3)/$(DEPMOD_STAGING_SUBDIR)/$(2)/lib/modules $$(PRIVATE_OUTPUT_DIR)/lib/; \ |
| find $$(PRIVATE_MODULE_DIR) -type f -name *.ko | xargs basename -a > $$(PRIVATE_LOAD_FILE); \ |
| ) |
| $(if $(1),\ |
| cp $$(PRIVATE_MODULES) $$(PRIVATE_MODULE_DIR)/; \ |
| for MODULE in $$(PRIVATE_LOAD_MODULES); do \ |
| basename $$$$MODULE >> $$(PRIVATE_LOAD_FILE); \ |
| done; \ |
| ) |
| $(DEPMOD) -b $$(PRIVATE_STAGING_DIR) 0.0 |
| # Turn paths in modules.dep into absolute paths |
| sed -i.tmp -e 's|\([^: ]*lib/modules/[^: ]*\)|/\1|g' $$(PRIVATE_STAGING_DIR)/$$(DEPMOD_STAGING_SUBDIR)/modules.dep |
| touch $$(PRIVATE_LOAD_FILE) |
| endef |
| |
| # $(1): staging dir |
| # $(2): modules list |
| # $(3): module load list |
| # $(4): module load list filename |
| # $(5): output dir |
| define module-load-list-copy-paths |
| $(eval $(call build-image-module-load-list,$(1),$(2),$(3),$(4))) \ |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(4):$(5)/lib/modules/$(4) |
| endef |
| |
| # $(1): staging dir |
| # $(2): modules list |
| # $(3): module load list |
| # $(4): module load list filename |
| define build-image-module-load-list |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(4): PRIVATE_LOAD_MODULES := $(3) |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(4): $(2) |
| @echo load-list $$(@) |
| @echo '$$(strip $$(notdir $$(PRIVATE_LOAD_MODULES)))' | tr ' ' '\n' > $$(@) |
| endef |
| |
| # $(1): source options file |
| # $(2): destination pathname |
| # Returns a build rule that checks the syntax of and installs a kernel modules |
| # options file. Strip and squeeze any extra space and blank lines. |
| # For use via $(eval). |
| define build-image-kernel-modules-options-file |
| $(2): $(1) |
| @echo "libmodprobe options $$(@)" |
| $(hide) mkdir -p "$$(dir $$@)" |
| $(hide) rm -f "$$@" |
| $(hide) awk <"$$<" >"$$@" \ |
| '/^#/ { print; next } \ |
| NF == 0 { next } \ |
| NF < 2 || $$$$1 != "options" \ |
| { print "Invalid options line " FNR ": " $$$$0 >"/dev/stderr"; \ |
| exit_status = 1; next } \ |
| { $$$$1 = $$$$1; print } \ |
| END { exit exit_status }' |
| endef |
| |
| # $(1): source blocklist file |
| # $(2): destination pathname |
| # Returns a build rule that checks the syntax of and installs a kernel modules |
| # blocklist file. Strip and squeeze any extra space and blank lines. |
| # For use via $(eval). |
| define build-image-kernel-modules-blocklist-file |
| $(2): $(1) |
| @echo "libmodprobe blocklist $$(@)" |
| $(hide) mkdir -p "$$(dir $$@)" |
| $(hide) rm -f "$$@" |
| $(hide) awk <"$$<" >"$$@" \ |
| '/^#/ { print; next } \ |
| NF == 0 { next } \ |
| NF != 2 || $$$$1 != "blocklist" \ |
| { print "Invalid blocklist line " FNR ": " $$$$0 >"/dev/stderr"; \ |
| exit_status = 1; next } \ |
| { $$$$1 = $$$$1; print } \ |
| END { exit exit_status }' |
| endef |
| |
| # $(1): image name |
| # $(2): build output directory (TARGET_OUT_VENDOR, TARGET_RECOVERY_ROOT_OUT, etc) |
| # $(3): mount point |
| # $(4): module load filename |
| # $(5): stripped staging directory |
| # $(6): kernel module directory name (top is an out of band value for no directory) |
| define build-image-kernel-modules-dir |
| $(if $(filter top,$(6)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(6))$(eval _sep :=_))\ |
| $(if $(5),\ |
| $(eval _stripped_staging_dir := $(5)$(_sep)$(_kver)),\ |
| $(eval _stripped_staging_dir :=))\ |
| $(if $(strip $(BOARD_$(1)_KERNEL_MODULES$(_sep)$(_kver))$(BOARD_$(1)_KERNEL_MODULES_ARCHIVE$(_sep)$(_kver))),\ |
| $(if $(BOARD_$(1)_KERNEL_MODULES_LOAD$(_sep)$(_kver)),,\ |
| $(eval BOARD_$(1)_KERNEL_MODULES_LOAD$(_sep)$(_kver) := $(BOARD_$(1)_KERNEL_MODULES$(_sep)$(_kver)))) \ |
| $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_$(1)_KERNEL_MODULES$(_sep)$(_kver)),$(2),$(3),$(call intermediates-dir-for,PACKAGING,depmod_$(1)$(_sep)$(_kver)),$(BOARD_$(1)_KERNEL_MODULES_LOAD$(_sep)$(_kver)),$(4),$(BOARD_$(1)_KERNEL_MODULES_ARCHIVE$(_sep)$(_kver)),$(_stripped_staging_dir),$(_kver)))) \ |
| $(if $(_kver), \ |
| $(eval _dir := $(_kver)/), \ |
| $(eval _dir :=)) \ |
| $(if $(BOARD_$(1)_KERNEL_MODULES_OPTIONS_FILE$(_sep)$(_kver)), \ |
| $(eval $(call build-image-kernel-modules-options-file, \ |
| $(BOARD_$(1)_KERNEL_MODULES_OPTIONS_FILE$(_sep)$(_kver)), \ |
| $(2)/lib/modules/$(_dir)modules.options)) \ |
| $(2)/lib/modules/$(_dir)modules.options) \ |
| $(if $(BOARD_$(1)_KERNEL_MODULES_BLOCKLIST_FILE$(_sep)$(_kver)), \ |
| $(eval $(call build-image-kernel-modules-blocklist-file, \ |
| $(BOARD_$(1)_KERNEL_MODULES_BLOCKLIST_FILE$(_sep)$(_kver)), \ |
| $(2)/lib/modules/$(_dir)modules.blocklist)) \ |
| $(2)/lib/modules/$(_dir)modules.blocklist) |
| endef |
| |
| # $(1): kernel module directory name (top is an out of band value for no directory) |
| define build-recovery-as-boot-load |
| $(if $(filter top,$(1)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(1))$(eval _sep :=_))\ |
| $(if $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD$(_sep)$(_kver)),\ |
| $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,ramdisk_module_list$(_sep)$(_kver)),$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES$(_sep)$(_kver)),$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD$(_sep)$(_kver)),modules.load,$(TARGET_RECOVERY_ROOT_OUT)))) |
| endef |
| |
| # $(1): kernel module directory name (top is an out of band value for no directory) |
| define build-vendor-ramdisk-recovery-load |
| $(if $(filter top,$(1)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(1))$(eval _sep :=_))\ |
| $(if $(BOARD_VENDOR_RAMDISK_RECOVERY_KERNEL_MODULES_LOAD$(_sep)$(_kver)),\ |
| $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,vendor_ramdisk_recovery_module_list$(_sep)$(_kver)),$(BOARD_VENDOR_RAMDISK_KERNEL_MODULES$(_sep)$(_kver)),$(BOARD_VENDOR_RAMDISK_RECOVERY_KERNEL_MODULES_LOAD$(_sep)$(_kver)),modules.load.recovery,$(TARGET_VENDOR_RAMDISK_OUT)))) |
| endef |
| |
| # $(1): kernel module directory name (top is an out of band value for no directory) |
| define build-vendor-charger-load |
| $(if $(filter top,$(1)),\ |
| $(eval _kver :=)$(eval _sep :=),\ |
| $(eval _kver := $(1))$(eval _sep :=_))\ |
| $(if $(BOARD_VENDOR_CHARGER_KERNEL_MODULES_LOAD$(_sep)$(_kver)),\ |
| $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,vendor_charger_module_list$(_sep)$(_kver)),$(BOARD_VENDOR_CHARGER_KERNEL_MODULES$(_sep)$(_kver)),$(BOARD_VENDOR_CHARGER_KERNEL_MODULES_LOAD$(_sep)$(_kver)),modules.load.charger,$(TARGET_OUT_VENDOR)))) |
| endef |
| |
| ifneq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| # If there is no vendor boot partition, store vendor ramdisk kernel modules in the |
| # boot ramdisk. |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES += $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES) |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD += $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD) |
| endif |
| |
| ifeq ($(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD),) |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD := $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES) |
| endif |
| |
| ifneq ($(strip $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES)),) |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT), true) |
| BOARD_RECOVERY_KERNEL_MODULES += $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES) |
| endif |
| endif |
| |
| ifneq ($(BOARD_DO_NOT_STRIP_RECOVERY_MODULES),true) |
| RECOVERY_STRIPPED_MODULE_STAGING_DIR := $(call intermediates-dir-for,PACKAGING,depmod_recovery_stripped) |
| else |
| RECOVERY_STRIPPED_MODULE_STAGING_DIR := |
| endif |
| |
| ifneq ($(BOARD_DO_NOT_STRIP_VENDOR_MODULES),true) |
| VENDOR_STRIPPED_MODULE_STAGING_DIR := $(call intermediates-dir-for,PACKAGING,depmod_vendor_stripped) |
| else |
| VENDOR_STRIPPED_MODULE_STAGING_DIR := |
| endif |
| |
| ifneq ($(BOARD_DO_NOT_STRIP_VENDOR_RAMDISK_MODULES),true) |
| VENDOR_RAMDISK_STRIPPED_MODULE_STAGING_DIR := $(call intermediates-dir-for,PACKAGING,depmod_vendor_ramdisk_stripped) |
| else |
| VENDOR_RAMDISK_STRIPPED_MODULE_STAGING_DIR := |
| endif |
| |
| BOARD_KERNEL_MODULE_DIRS += top |
| $(foreach kmd,$(BOARD_KERNEL_MODULE_DIRS), \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,RECOVERY,$(TARGET_RECOVERY_ROOT_OUT),,modules.load.recovery,$(RECOVERY_STRIPPED_MODULE_STAGING_DIR),$(kmd))) \ |
| $(eval vendor_ramdisk_fragment := $(KERNEL_MODULE_DIR_VENDOR_RAMDISK_FRAGMENT_$(kmd))) \ |
| $(if $(vendor_ramdisk_fragment), \ |
| $(eval output_dir := $(VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).STAGING_DIR)) \ |
| $(eval result_var := VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).FILES) \ |
| $(eval ### else ###), \ |
| $(eval output_dir := $(TARGET_VENDOR_RAMDISK_OUT)) \ |
| $(eval result_var := ALL_DEFAULT_INSTALLED_MODULES)) \ |
| $(eval $(result_var) += $(call build-image-kernel-modules-dir,VENDOR_RAMDISK,$(output_dir),,modules.load,$(VENDOR_RAMDISK_STRIPPED_MODULE_STAGING_DIR),$(kmd))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-vendor-ramdisk-recovery-load,$(kmd))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,VENDOR,$(if $(filter true,$(BOARD_USES_VENDOR_DLKMIMAGE)),$(TARGET_OUT_VENDOR_DLKM),$(TARGET_OUT_VENDOR)),vendor,modules.load,$(VENDOR_STRIPPED_MODULE_STAGING_DIR),$(kmd))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-vendor-charger-load,$(kmd))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,ODM,$(if $(filter true,$(BOARD_USES_ODM_DLKMIMAGE)),$(TARGET_OUT_ODM_DLKM),$(TARGET_OUT_ODM)),odm,modules.load,,$(kmd))) \ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-recovery-as-boot-load,$(kmd))),\ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(call build-image-kernel-modules-dir,GENERIC_RAMDISK,$(TARGET_RAMDISK_OUT),,modules.load,,$(kmd))))) |
| |
| # ----------------------------------------------------------------- |
| # Cert-to-package mapping. Used by the post-build signing tools. |
| # Use a macro to add newline to each echo command |
| # $1 stem name of the package |
| # $2 certificate |
| # $3 private key |
| # $4 compressed |
| # $5 partition tag |
| # $6 output file |
| define _apkcerts_write_line |
| $(hide) echo -n 'name="$(1).apk" certificate="$2" private_key="$3"' >> $6 |
| $(if $(4), $(hide) echo -n ' compressed="$4"' >> $6) |
| $(if $(5), $(hide) echo -n ' partition="$5"' >> $6) |
| $(hide) echo '' >> $6 |
| |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Merge an individual apkcerts output into the final apkcerts.txt output. |
| # Use a macro to make it compatible with _apkcerts_write_line |
| # $1 apkcerts file to be merged |
| # $2 output file |
| define _apkcerts_merge |
| $(hide) cat $1 >> $2 |
| |
| endef |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apkcerts-$(FILE_NAME_TAG) |
| intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,apkcerts) |
| APKCERTS_FILE := $(intermediates)/$(name).txt |
| all_apkcerts_files := $(sort $(foreach p,$(PACKAGES),$(PACKAGES.$(p).APKCERTS_FILE))) |
| $(APKCERTS_FILE): $(all_apkcerts_files) |
| # We don't need to really build all the modules. |
| # TODO: rebuild APKCERTS_FILE if any app change its cert. |
| $(APKCERTS_FILE): |
| @echo APK certs list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(foreach p,$(sort $(PACKAGES)),\ |
| $(if $(PACKAGES.$(p).APKCERTS_FILE),\ |
| $(call _apkcerts_merge,$(PACKAGES.$(p).APKCERTS_FILE), $@),\ |
| $(if $(PACKAGES.$(p).EXTERNAL_KEY),\ |
| $(call _apkcerts_write_line,$(PACKAGES.$(p).STEM),EXTERNAL,,$(PACKAGES.$(p).COMPRESSED),$(PACKAGES.$(p).PARTITION),$@),\ |
| $(call _apkcerts_write_line,$(PACKAGES.$(p).STEM),$(PACKAGES.$(p).CERTIFICATE),$(PACKAGES.$(p).PRIVATE_KEY),$(PACKAGES.$(p).COMPRESSED),$(PACKAGES.$(p).PARTITION),$@)))) |
| $(if $(filter true,$(PRODUCT_SYSTEM_FSVERITY_GENERATE_METADATA)),\ |
| $(call _apkcerts_write_line,$(notdir $(basename $(FSVERITY_APK_OUT))),$(FSVERITY_APK_KEY_PATH).x509.pem,$(FSVERITY_APK_KEY_PATH).pk8,,system,$@)) |
| # In case value of PACKAGES is empty. |
| $(hide) touch $@ |
| |
| .PHONY: apkcerts-list |
| apkcerts-list: $(APKCERTS_FILE) |
| |
| ifneq (,$(TARGET_BUILD_APPS)) |
| $(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt) |
| $(call dist-for-goals, apps_only, $(SOONG_APEX_KEYS_FILE):apexkeys.txt) |
| endif |
| |
| |
| # ----------------------------------------------------------------- |
| # build system stats |
| BUILD_SYSTEM_STATS := $(PRODUCT_OUT)/build_system_stats.txt |
| $(BUILD_SYSTEM_STATS): |
| @rm -f $@ |
| @$(foreach s,$(STATS.MODULE_TYPE),echo "modules_type_make,$(s),$(words $(STATS.MODULE_TYPE.$(s)))" >>$@;) |
| @$(foreach s,$(STATS.SOONG_MODULE_TYPE),echo "modules_type_soong,$(s),$(STATS.SOONG_MODULE_TYPE.$(s))" >>$@;) |
| $(call dist-for-goals,droidcore-unbundled,$(BUILD_SYSTEM_STATS)) |
| |
| # ----------------------------------------------------------------- |
| # build /product/etc/security/avb/system_other.avbpubkey if needed |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET := $(TARGET_OUT_PRODUCT_ETC)/security/avb/system_other.avbpubkey |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET) |
| endif # BOARD_AVB_ENABLE |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # Modules ready to be converted to Soong, ordered by how many |
| # modules depend on them. |
| SOONG_CONV := $(sort $(SOONG_CONV)) |
| SOONG_CONV_DATA := $(call intermediates-dir-for,PACKAGING,soong_conversion)/soong_conv_data |
| $(SOONG_CONV_DATA): |
| @rm -f $@ |
| @$(foreach s,$(SOONG_CONV),echo "$(s),$(SOONG_CONV.$(s).TYPE),$(sort $(SOONG_CONV.$(s).PROBLEMS)),$(sort $(filter-out $(SOONG_ALREADY_CONV),$(SOONG_CONV.$(s).DEPS))),$(sort $(SOONG_CONV.$(s).MAKEFILES)),$(sort $(SOONG_CONV.$(s).INSTALLED))" >>$@;) |
| |
| SOONG_TO_CONVERT_SCRIPT := build/make/tools/soong_to_convert.py |
| SOONG_TO_CONVERT := $(PRODUCT_OUT)/soong_to_convert.txt |
| $(SOONG_TO_CONVERT): $(SOONG_CONV_DATA) $(SOONG_TO_CONVERT_SCRIPT) |
| @rm -f $@ |
| $(hide) $(SOONG_TO_CONVERT_SCRIPT) $< >$@ |
| $(call dist-for-goals,droidcore-unbundled,$(SOONG_TO_CONVERT)) |
| |
| MK2BP_CATALOG_SCRIPT := build/make/tools/mk2bp_catalog.py |
| MK2BP_REMAINING_HTML := $(PRODUCT_OUT)/mk2bp_remaining.html |
| $(MK2BP_REMAINING_HTML): PRIVATE_CODE_SEARCH_BASE_URL := "https://cs.android.com/android/platform/superproject/+/master:" |
| $(MK2BP_REMAINING_HTML): $(SOONG_CONV_DATA) $(MK2BP_CATALOG_SCRIPT) |
| @rm -f $@ |
| $(hide) $(MK2BP_CATALOG_SCRIPT) \ |
| --device=$(TARGET_DEVICE) \ |
| --title="Remaining Android.mk files for $(TARGET_DEVICE)-$(TARGET_BUILD_VARIANT)" \ |
| --codesearch=$(PRIVATE_CODE_SEARCH_BASE_URL) \ |
| --out_dir="$(OUT_DIR)" \ |
| --mode=html \ |
| > $@ |
| $(call dist-for-goals,droidcore-unbundled,$(MK2BP_REMAINING_HTML)) |
| |
| MK2BP_REMAINING_CSV := $(PRODUCT_OUT)/mk2bp_remaining.csv |
| $(MK2BP_REMAINING_CSV): $(SOONG_CONV_DATA) $(MK2BP_CATALOG_SCRIPT) |
| @rm -f $@ |
| $(hide) $(MK2BP_CATALOG_SCRIPT) \ |
| --device=$(TARGET_DEVICE) \ |
| --out_dir="$(OUT_DIR)" \ |
| --mode=csv \ |
| > $@ |
| $(call dist-for-goals,droidcore-unbundled,$(MK2BP_REMAINING_CSV)) |
| |
| # ----------------------------------------------------------------- |
| # Modules use -Wno-error, or added default -Wall -Werror |
| WALL_WERROR := $(PRODUCT_OUT)/wall_werror.txt |
| $(WALL_WERROR): |
| @rm -f $@ |
| echo "# Modules using -Wno-error" >> $@ |
| for m in $(sort $(SOONG_MODULES_USING_WNO_ERROR) $(MODULES_USING_WNO_ERROR)); do echo $$m >> $@; done |
| echo "# Modules added default -Wall" >> $@ |
| for m in $(sort $(SOONG_MODULES_ADDED_WALL) $(MODULES_ADDED_WALL)); do echo $$m >> $@; done |
| |
| $(call dist-for-goals,droidcore-unbundled,$(WALL_WERROR)) |
| |
| # ----------------------------------------------------------------- |
| # C/C++ flag information for modules |
| $(call dist-for-goals,droidcore-unbundled,$(SOONG_MODULES_CFLAG_ARTIFACTS)) |
| |
| # ----------------------------------------------------------------- |
| # Modules missing profile files |
| PGO_PROFILE_MISSING := $(PRODUCT_OUT)/pgo_profile_file_missing.txt |
| $(PGO_PROFILE_MISSING): |
| @rm -f $@ |
| echo "# Modules missing PGO profile files" >> $@ |
| for m in $(SOONG_MODULES_MISSING_PGO_PROFILE_FILE); do echo $$m >> $@; done |
| |
| $(call dist-for-goals,droidcore,$(PGO_PROFILE_MISSING)) |
| |
| CERTIFICATE_VIOLATION_MODULES_FILENAME := $(PRODUCT_OUT)/certificate_violation_modules.txt |
| $(CERTIFICATE_VIOLATION_MODULES_FILENAME): |
| rm -f $@ |
| $(foreach m,$(sort $(CERTIFICATE_VIOLATION_MODULES)), echo $(m) >> $@;) |
| $(call dist-for-goals,droidcore,$(CERTIFICATE_VIOLATION_MODULES_FILENAME)) |
| |
| # ----------------------------------------------------------------- |
| # The dev key is used to sign this package, and as the key required |
| # for future OTA packages installed by this system. Actual product |
| # deliverables will be re-signed by hand. We expect this file to |
| # exist with the suffixes ".x509.pem" and ".pk8". |
| DEFAULT_KEY_CERT_PAIR := $(strip $(DEFAULT_SYSTEM_DEV_CERTIFICATE)) |
| |
| |
| # Rules that need to be present for the all targets, even |
| # if they don't do anything. |
| .PHONY: systemimage |
| systemimage: |
| |
| # ----------------------------------------------------------------- |
| |
| .PHONY: event-log-tags |
| |
| # Produce an event logs tag file for everything we know about, in order |
| # to properly allocate numbers. Then produce a file that's filtered |
| # for what's going to be installed. |
| |
| all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt |
| |
| event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags |
| |
| # Include tags from all packages that we know about |
| all_event_log_tags_src := \ |
| $(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS))) |
| |
| $(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) |
| $(all_event_log_tags_file): $(all_event_log_tags_src) $(MERGETAGS) build/make/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ $(PRIVATE_SRC_FILES) |
| |
| # Include tags from all packages included in this product, plus all |
| # tags that are part of the system (ie, not in a vendor/ or device/ |
| # directory). |
| event_log_tags_src := \ |
| $(sort $(foreach m,\ |
| $(call resolve-bitness-for-modules,TARGET,$(PRODUCT_PACKAGES)) \ |
| $(call module-names-for-tag-list,user), \ |
| $(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \ |
| $(filter-out vendor/% device/% out/%,$(all_event_log_tags_src))) |
| |
| $(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) |
| $(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file) |
| $(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(MERGETAGS) build/make/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES) |
| |
| event-log-tags: $(event_log_tags_file) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file) |
| |
| |
| # ################################################################# |
| # Targets for boot/OS images |
| # ################################################################# |
| ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true) |
| INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader |
| ifdef BOARD_PREBUILT_BOOTLOADER |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_BOOTLOADER),$(INSTALLED_BOOTLOADER_MODULE))) |
| $(call dist-for-goals,dist_files,$(INSTALLED_BOOTLOADER_MODULE)) |
| endif # BOARD_PREBUILT_BOOTLOADER |
| ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true) |
| INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader |
| else |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif |
| else |
| INSTALLED_BOOTLOADER_MODULE := |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif # TARGET_NO_BOOTLOADER |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_KERNEL_TARGET := $(foreach k,$(BOARD_KERNEL_BINARIES), \ |
| $(PRODUCT_OUT)/$(k)) |
| else |
| INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel |
| endif |
| else |
| INSTALLED_KERNEL_TARGET := |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the root dir |
| INTERNAL_ROOT_FILES := $(filter $(TARGET_ROOT_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_ROOT := $(PRODUCT_OUT)/installed-files-root.txt |
| INSTALLED_FILES_JSON_ROOT := $(INSTALLED_FILES_FILE_ROOT:.txt=.json) |
| $(INSTALLED_FILES_FILE_ROOT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ROOT) |
| $(INSTALLED_FILES_FILE_ROOT) : $(INTERNAL_ROOT_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(TARGET_ROOT_OUT) |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_ROOT_OUT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| ifeq ($(HOST_OS),linux) |
| $(call dist-for-goals, sdk sdk_addon, $(INSTALLED_FILES_FILE_ROOT)) |
| endif |
| |
| #------------------------------------------------------------------ |
| # dtb |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INSTALLED_DTBIMAGE_TARGET := $(PRODUCT_OUT)/dtb.img |
| ifdef BOARD_PREBUILT_DTBIMAGE_DIR |
| $(INSTALLED_DTBIMAGE_TARGET) : $(sort $(wildcard $(BOARD_PREBUILT_DTBIMAGE_DIR)/*.dtb)) |
| cat $^ > $@ |
| endif |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the ramdisk |
| ifdef BUILDING_RAMDISK_IMAGE |
| INTERNAL_RAMDISK_FILES := $(filter $(TARGET_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk.txt |
| INSTALLED_FILES_JSON_RAMDISK := $(INSTALLED_FILES_FILE_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RAMDISK) |
| $(INSTALLED_FILES_FILE_RAMDISK) : $(INTERNAL_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(TARGET_RAMDISK_OUT) |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_RAMDISK_OUT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| ifeq ($(HOST_OS),linux) |
| $(call dist-for-goals, sdk sdk_addon, $(INSTALLED_FILES_FILE_RAMDISK)) |
| endif |
| BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img |
| |
| ifeq ($(BOARD_RAMDISK_USE_LZ4),true) |
| # -l enables the legacy format used by the Linux kernel |
| COMPRESSION_COMMAND_DEPS := $(LZ4) |
| COMPRESSION_COMMAND := $(LZ4) -l -12 --favor-decSpeed |
| RAMDISK_EXT := .lz4 |
| else |
| COMPRESSION_COMMAND_DEPS := $(MINIGZIP) |
| COMPRESSION_COMMAND := $(MINIGZIP) |
| RAMDISK_EXT := .gz |
| endif |
| |
| # We just build this directly to the install location. |
| INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET) |
| $(INSTALLED_RAMDISK_TARGET): PRIVATE_DIRS := debug_ramdisk dev metadata mnt proc second_stage_resources sys |
| $(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) $(INSTALLED_FILES_FILE_RAMDISK) | $(COMPRESSION_COMMAND_DEPS) |
| $(call pretty,"Target ramdisk: $@") |
| $(hide) mkdir -p $(addprefix $(TARGET_RAMDISK_OUT)/,$(PRIVATE_DIRS)) |
| ifeq (true,$(BOARD_USES_GENERIC_KERNEL_IMAGE)) |
| $(hide) mkdir -p $(addprefix $(TARGET_RAMDISK_OUT)/first_stage_ramdisk/,$(PRIVATE_DIRS)) |
| endif |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(COMPRESSION_COMMAND) > $@ |
| |
| .PHONY: ramdisk-nodeps |
| ramdisk-nodeps: $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(COMPRESSION_COMMAND) > $(INSTALLED_RAMDISK_TARGET) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot image, which is a collection of other images. |
| |
| # This is defined here since we may be building recovery as boot |
| # below and only want to define this once |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| BUILT_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot,$(BOARD_KERNEL_BINARIES)), $(PRODUCT_OUT)/$(k).img) |
| else |
| BUILT_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| endif |
| |
| INTERNAL_PREBUILT_BOOTIMAGE := |
| |
| my_installed_prebuilt_gki_apex := $(strip $(foreach package,$(PRODUCT_PACKAGES),$(if $(ALL_MODULES.$(package).EXTRACTED_BOOT_IMAGE),$(package)))) |
| ifdef my_installed_prebuilt_gki_apex |
| ifneq (1,$(words $(my_installed_prebuilt_gki_apex))) # len(my_installed_prebuilt_gki_apex) > 1 |
| $(error More than one prebuilt GKI APEXes are installed: $(my_installed_prebuilt_gki_apex)) |
| endif # len(my_installed_prebuilt_gki_apex) > 1 |
| |
| ifdef BOARD_PREBUILT_BOOTIMAGE |
| $(error Must not define BOARD_PREBUILT_BOOTIMAGE because a prebuilt GKI APEX is installed: $(my_installed_prebuilt_gki_apex)) |
| endif # BOARD_PREBUILT_BOOTIMAGE defined |
| |
| my_apex_extracted_boot_image := $(ALL_MODULES.$(my_installed_prebuilt_gki_apex).EXTRACTED_BOOT_IMAGE) |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| $(eval $(call copy-one-file,$(my_apex_extracted_boot_image),$(INSTALLED_BOOTIMAGE_TARGET))) |
| |
| INTERNAL_PREBUILT_BOOTIMAGE := $(my_apex_extracted_boot_image) |
| |
| else # my_installed_prebuilt_gki_apex not defined |
| |
| # $1: boot image target |
| # returns the kernel used to make the bootimage |
| define bootimage-to-kernel |
| $(if $(BOARD_KERNEL_BINARIES),\ |
| $(PRODUCT_OUT)/$(subst .img,,$(subst boot,kernel,$(notdir $(1)))),\ |
| $(INSTALLED_KERNEL_TARGET)) |
| endef |
| |
| ifdef BOARD_BOOTIMAGE_PARTITION_SIZE |
| BOARD_KERNEL_BOOTIMAGE_PARTITION_SIZE := $(BOARD_BOOTIMAGE_PARTITION_SIZE) |
| endif |
| |
| # $1: boot image file name |
| # $2: boot image variant (boot, boot-debug, boot-test-harness) |
| define get-bootimage-partition-size |
| $(BOARD_$(call to-upper,$(subst .img,,$(subst $(2),kernel,$(notdir $(1)))))_BOOTIMAGE_PARTITION_SIZE) |
| endef |
| |
| # $1: partition size |
| define get-partition-size-argument |
| $(if $(1),--partition_size $(1),--dynamic_partition_size) |
| endef |
| |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| INTERNAL_BOOTIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) |
| |
| INTERNAL_INIT_BOOT_IMAGE_ARGS := |
| |
| INTERNAL_BOOT_HAS_RAMDISK := |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| ifneq ($(BUILDING_INIT_BOOT_IMAGE),true) |
| INTERNAL_BOOTIMAGE_ARGS += --ramdisk $(INSTALLED_RAMDISK_TARGET) |
| INTERNAL_BOOT_HAS_RAMDISK := true |
| else |
| INTERNAL_INIT_BOOT_IMAGE_ARGS += --ramdisk $(INSTALLED_RAMDISK_TARGET) |
| endif |
| endif |
| |
| ifndef BUILDING_VENDOR_BOOT_IMAGE |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_BOOTIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| endif |
| |
| INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS)) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| VERITY_KEYID := veritykeyid=id:`openssl x509 -in $(PRODUCT_VERITY_SIGNING_KEY).x509.pem -text \ |
| | grep keyid | sed 's/://g' | tr -d '[:space:]' | tr '[:upper:]' '[:lower:]' | sed 's/keyid//g'` |
| endif |
| endif |
| |
| INTERNAL_KERNEL_CMDLINE := $(strip $(INTERNAL_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID)) |
| |
| # kernel cmdline/base/pagesize in boot. |
| # - If using GKI, use GENERIC_KERNEL_CMDLINE. Remove kernel base and pagesize because they are |
| # device-specific. |
| # - If not using GKI: |
| # - If building vendor_boot, INTERNAL_KERNEL_CMDLINE, base and pagesize goes in vendor_boot. |
| # - Otherwise, put them in boot. |
| ifeq (true,$(BOARD_USES_GENERIC_KERNEL_IMAGE)) |
| ifdef GENERIC_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(GENERIC_KERNEL_CMDLINE)" |
| endif |
| else ifndef BUILDING_VENDOR_BOOT_IMAGE # && BOARD_USES_GENERIC_KERNEL_IMAGE != true |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| endif # BUILDING_VENDOR_BOOT_IMAGE == "" && BOARD_USES_GENERIC_KERNEL_IMAGE != true |
| |
| INTERNAL_MKBOOTIMG_VERSION_ARGS := \ |
| --os_version $(PLATFORM_VERSION_LAST_STABLE) \ |
| --os_patch_level $(PLATFORM_SECURITY_PATCH) |
| |
| # $(1): image target to certify |
| # $(2): out certificate target |
| # $(3): image name |
| # $(4): additional AVB arguments |
| define generate_generic_boot_image_certificate |
| rm -rf "$(2)" |
| mkdir -p "$(dir $(2))" |
| $(GENERATE_GKI_CERTIFICATE) $(INTERNAL_GKI_CERTIFICATE_ARGS) \ |
| --additional_avb_args "$(4)" \ |
| --name "$(3)" --output "$(2)" "$(1)" |
| endef |
| |
| INTERNAL_GKI_CERTIFICATE_ARGS := |
| INTERNAL_GKI_CERTIFICATE_DEPS := |
| INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE := |
| ifdef BOARD_GKI_SIGNING_KEY_PATH |
| ifndef BOARD_GKI_SIGNING_ALGORITHM |
| $(error BOARD_GKI_SIGNING_ALGORITHM should be defined with BOARD_GKI_SIGNING_KEY_PATH) |
| endif |
| |
| INTERNAL_GKI_CERTIFICATE_ARGS := \ |
| --key "$(BOARD_GKI_SIGNING_KEY_PATH)" \ |
| --algorithm "$(BOARD_GKI_SIGNING_ALGORITHM)" \ |
| --avbtool "$(AVBTOOL)" |
| |
| # Quote and pass BOARD_GKI_SIGNING_SIGNATURE_ARGS as a single string argument. |
| ifdef BOARD_GKI_SIGNING_SIGNATURE_ARGS |
| INTERNAL_GKI_CERTIFICATE_ARGS += --additional_avb_args "$(BOARD_GKI_SIGNING_SIGNATURE_ARGS)" |
| endif |
| |
| INTERNAL_GKI_CERTIFICATE_DEPS := \ |
| $(GENERATE_GKI_CERTIFICATE) \ |
| $(BOARD_GKI_SIGNING_KEY_PATH) \ |
| $(AVBTOOL) |
| |
| ifdef INSTALLED_RAMDISK_TARGET |
| INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE := \ |
| $(call intermediates-dir-for,PACKAGING,generic_ramdisk)/boot_signature |
| |
| $(INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE): $(INSTALLED_RAMDISK_TARGET) $(INTERNAL_GKI_CERTIFICATE_DEPS) |
| $(call generate_generic_boot_image_certificate,$(INSTALLED_RAMDISK_TARGET),$@,generic_ramdisk,$(BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS)) |
| endif |
| endif |
| |
| # Define these only if we are building boot |
| ifdef BUILDING_BOOT_IMAGE |
| INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET) |
| |
| ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true) |
| $(error TARGET_BOOTIMAGE_USE_EXT2 is not supported anymore) |
| endif # TARGET_BOOTIMAGE_USE_EXT2 |
| |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET), $(eval $(call add-dependency,$(b),$(call bootimage-to-kernel,$(b))))) |
| |
| ifeq (true,$(BOARD_AVB_ENABLE)) |
| |
| # $1: boot image target |
| define build_boot_board_avb_enabled |
| $(eval kernel := $(call bootimage-to-kernel,$(1))) |
| $(if $(BOARD_GKI_SIGNING_KEY_PATH), \ |
| $(eval kernel_signature := $(call intermediates-dir-for,PACKAGING,generic_kernel)/$(notdir $(kernel)).boot_signature) \ |
| $(call generate_generic_boot_image_certificate,$(kernel),$(kernel_signature),generic_kernel,$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)) $(newline) \ |
| $(if $(INTERNAL_BOOT_HAS_RAMDISK), \ |
| cat $(INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE) >> $(kernel_signature) $(newline))) |
| $(MKBOOTIMG) --kernel $(kernel) $(INTERNAL_BOOTIMAGE_ARGS) \ |
| $(if $(BOARD_GKI_SIGNING_KEY_PATH),--boot_signature "$(kernel_signature)",$(INTERNAL_MKBOOTIMG_VERSION_ARGS)) \ |
| $(BOARD_MKBOOTIMG_ARGS) --output $(1) |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(call get-bootimage-partition-size,$(1),boot))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| $(call get-partition-size-argument,$(call get-bootimage-partition-size,$(1),boot)) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| endef |
| |
| ifdef INTERNAL_BOOT_HAS_RAMDISK |
| $(INSTALLED_BOOTIMAGE_TARGET): $(INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE) |
| endif |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH) $(INTERNAL_GKI_CERTIFICATE_DEPS) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_board_avb_enabled,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) $(INTERNAL_GKI_CERTIFICATE_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_board_avb_enabled,$(b))) |
| |
| else ifeq (true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)) # BOARD_AVB_ENABLE != true |
| |
| # $1: boot image target |
| define build_boot_supports_boot_signer |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) |
| $(BOOT_SIGNER) /boot $@ $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1) |
| $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),boot)) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOT_SIGNER) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_supports_boot_signer,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(BOOT_SIGNER) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_supports_boot_signer,$(b))) |
| |
| else ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) # PRODUCT_SUPPORTS_BOOT_SIGNER != true |
| |
| # $1: boot image target |
| define build_boot_supports_vboot |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1).unsigned |
| $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1) |
| $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),boot)) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_supports_vboot,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(VBOOT_SIGNER) $(FUTILITY) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_supports_vboot,$(b))) |
| |
| else # PRODUCT_SUPPORTS_VBOOT != true |
| |
| # $1: boot image target |
| define build_boot_novboot |
| $(MKBOOTIMG) --kernel $(call bootimage-to-kernel,$(1)) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) |
| $(call assert-max-image-size,$1,$(call get-bootimage-partition-size,$(1),boot)) |
| endef |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) |
| $(call pretty,"Target boot image: $@") |
| $(call build_boot_novboot,$@) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) |
| @echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_novboot,$(b))) |
| |
| endif # BOARD_AVB_ENABLE |
| endif # BUILDING_BOOT_IMAGE |
| |
| else # TARGET_NO_KERNEL == "true" |
| ifdef BOARD_PREBUILT_BOOTIMAGE |
| INTERNAL_PREBUILT_BOOTIMAGE := $(BOARD_PREBUILT_BOOTIMAGE) |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_BOOTIMAGE_TARGET): $(INTERNAL_PREBUILT_BOOTIMAGE) $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| cp $(INTERNAL_PREBUILT_BOOTIMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| $(call get-partition-size-argument,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_BOOTIMAGE_TARGET): $(INTERNAL_PREBUILT_BOOTIMAGE) |
| cp $(INTERNAL_PREBUILT_BOOTIMAGE) $@ |
| endif # BOARD_AVB_ENABLE |
| |
| else # BOARD_PREBUILT_BOOTIMAGE not defined |
| INSTALLED_BOOTIMAGE_TARGET := |
| endif # BOARD_PREBUILT_BOOTIMAGE |
| endif # TARGET_NO_KERNEL |
| endif # my_installed_prebuilt_gki_apex not defined |
| |
| my_apex_extracted_boot_image := |
| my_installed_prebuilt_gki_apex := |
| |
| # ----------------------------------------------------------------- |
| # init boot image |
| ifeq ($(BUILDING_INIT_BOOT_IMAGE),true) |
| |
| INSTALLED_INIT_BOOT_IMAGE_TARGET := $(PRODUCT_OUT)/init_boot.img |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_RAMDISK_TARGET) |
| |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_INIT_BOOT_IMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET): $(INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE) |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_INIT_BOOT_KEY_PATH) |
| $(call pretty,"Target init_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_INIT_BOOT_IMAGE_ARGS) \ |
| $(if $(BOARD_GKI_SIGNING_KEY_PATH),--boot_signature "$(INTERNAL_GENERIC_RAMDISK_BOOT_SIGNATURE)",$(INTERNAL_MKBOOTIMG_VERSION_ARGS)) \ |
| $(BOARD_MKBOOTIMG_INIT_ARGS) --output "$@" |
| $(call assert-max-image-size,$@,$(BOARD_INIT_BOOT_IMAGE_PARTITION_SIZE)) |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| $(call get-partition-size-argument,$(BOARD_INIT_BOOT_IMAGE_PARTITION_SIZE)) \ |
| --partition_name init_boot $(INTERNAL_AVB_INIT_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET): |
| $(call pretty,"Target init_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_INIT_BOOT_IMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_INIT_ARGS) --output $@ |
| $(call assert-max-image-size,$@,$(BOARD_INIT_BOOT_IMAGE_PARTITION_SIZE)) |
| endif |
| |
| else # BUILDING_INIT_BOOT_IMAGE is not true |
| |
| ifdef BOARD_PREBUILT_INIT_BOOT_IMAGE |
| INTERNAL_PREBUILT_INIT_BOOT_IMAGE := $(BOARD_PREBUILT_INIT_BOOT_IMAGE) |
| INSTALLED_INIT_BOOT_IMAGE_TARGET := $(PRODUCT_OUT)/init_boot.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET): $(INTERNAL_PREBUILT_INIT_BOOT_IMAGE) $(AVBTOOL) $(BOARD_AVB_INIT_BOOT_KEY_PATH) |
| cp $(INTERNAL_PREBUILT_INIT_BOOT_IMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| $(call get-partition-size-argument,$(BOARD_INIT_BOOT_IMAGE_PARTITION_SIZE)) \ |
| --partition_name boot $(INTERNAL_AVB_INIT_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET): $(INTERNAL_PREBUILT_INIT_BOOT_IMAGE) |
| cp $(INTERNAL_PREBUILT_INIT_BOOT_IMAGE) $@ |
| endif # BOARD_AVB_ENABLE |
| |
| else # BOARD_PREBUILT_INIT_BOOT_IMAGE not defined |
| INSTALLED_INIT_BOOT_IMAGE_TARGET := |
| endif # BOARD_PREBUILT_INIT_BOOT_IMAGE |
| |
| endif # BUILDING_INIT_BOOT_IMAGE is not true |
| |
| # ----------------------------------------------------------------- |
| # vendor boot image |
| ifeq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| $(error vboot 1.0 does not support vendor_boot partition) |
| endif |
| |
| INTERNAL_VENDOR_RAMDISK_FILES := $(filter $(TARGET_VENDOR_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INTERNAL_VENDOR_RAMDISK_TARGET := $(call intermediates-dir-for,PACKAGING,vendor_boot)/vendor_ramdisk.cpio$(RAMDISK_EXT) |
| |
| # Exclude recovery files in the default vendor ramdisk if including a standalone |
| # recovery ramdisk in vendor_boot. |
| ifeq (true,$(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT)) |
| ifneq (true,$(BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT)) |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): PRIVATE_ADDITIONAL_DIR := $(TARGET_RECOVERY_ROOT_OUT) |
| endif |
| endif |
| |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_VENDOR_RAMDISK_FILES) | $(COMPRESSION_COMMAND_DEPS) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_VENDOR_RAMDISK_OUT) $(PRIVATE_ADDITIONAL_DIR) | $(COMPRESSION_COMMAND) > $@ |
| |
| INSTALLED_VENDOR_RAMDISK_TARGET := $(PRODUCT_OUT)/vendor_ramdisk.img |
| $(INSTALLED_VENDOR_RAMDISK_TARGET): $(INTERNAL_VENDOR_RAMDISK_TARGET) |
| @echo "Target vendor ramdisk: $@" |
| $(copy-file-to-target) |
| |
| INSTALLED_FILES_FILE_VENDOR_RAMDISK := $(PRODUCT_OUT)/installed-files-vendor-ramdisk.txt |
| INSTALLED_FILES_JSON_VENDOR_RAMDISK := $(INSTALLED_FILES_FILE_VENDOR_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_RAMDISK) |
| $(INSTALLED_FILES_FILE_VENDOR_RAMDISK): $(INTERNAL_VENDOR_RAMDISK_TARGET) |
| $(INSTALLED_FILES_FILE_VENDOR_RAMDISK): $(INTERNAL_VENDOR_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_VENDOR_RAMDISK_OUT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --vendor_cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| |
| ifdef INTERNAL_BOOTCONFIG |
| INTERNAL_VENDOR_BOOTCONFIG_TARGET := $(PRODUCT_OUT)/vendor-bootconfig.img |
| $(INTERNAL_VENDOR_BOOTCONFIG_TARGET): |
| rm -f $@ |
| $(foreach param,$(INTERNAL_BOOTCONFIG), \ |
| printf "%s\n" $(param) >> $@;) |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --vendor_bootconfig $(INTERNAL_VENDOR_BOOTCONFIG_TARGET) |
| endif |
| |
| # $(1): Build target name |
| # $(2): Staging dir to be compressed |
| # $(3): Build dependencies |
| define build-vendor-ramdisk-fragment-target |
| $(1): $(3) $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(2) | $(COMPRESSION_COMMAND) > $$@ |
| endef |
| |
| # $(1): Ramdisk name |
| define build-vendor-ramdisk-fragment |
| $(strip \ |
| $(eval build_target := $(call intermediates-dir-for,PACKAGING,vendor_ramdisk_fragments)/$(1).cpio$(RAMDISK_EXT)) \ |
| $(eval $(call build-vendor-ramdisk-fragment-target,$(build_target),$(VENDOR_RAMDISK_FRAGMENT.$(1).STAGING_DIR),$(VENDOR_RAMDISK_FRAGMENT.$(1).FILES))) \ |
| $(build_target) \ |
| ) |
| endef |
| |
| # $(1): Ramdisk name |
| # $(2): Prebuilt file path |
| define build-prebuilt-vendor-ramdisk-fragment |
| $(strip \ |
| $(eval build_target := $(call intermediates-dir-for,PACKAGING,prebuilt_vendor_ramdisk_fragments)/$(1)) \ |
| $(eval $(call copy-one-file,$(2),$(build_target))) \ |
| $(build_target) \ |
| ) |
| endef |
| |
| INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS := |
| INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS := |
| |
| $(foreach vendor_ramdisk_fragment,$(INTERNAL_VENDOR_RAMDISK_FRAGMENTS), \ |
| $(eval prebuilt_vendor_ramdisk_fragment_file := $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).PREBUILT)) \ |
| $(if $(prebuilt_vendor_ramdisk_fragment_file), \ |
| $(eval vendor_ramdisk_fragment_target := $(call build-prebuilt-vendor-ramdisk-fragment,$(vendor_ramdisk_fragment),$(prebuilt_vendor_ramdisk_fragment_file))) \ |
| $(eval ### else ###), \ |
| $(eval vendor_ramdisk_fragment_target := $(call build-vendor-ramdisk-fragment,$(vendor_ramdisk_fragment)))) \ |
| $(eval INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS += $(vendor_ramdisk_fragment_target)) \ |
| $(eval INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS += $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS) --vendor_ramdisk_fragment $(vendor_ramdisk_fragment_target)) \ |
| ) |
| |
| INSTALLED_VENDOR_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot.img |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INSTALLED_DTBIMAGE_TARGET) |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS) $(INTERNAL_VENDOR_BOOTCONFIG_TARGET) |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOTIMAGE_KEY_PATH) |
| $(call pretty,"Target vendor_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| $(call get-partition-size-argument,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) \ |
| --partition_name vendor_boot $(INTERNAL_AVB_VENDOR_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): |
| $(call pretty,"Target vendor_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| endif |
| endif # BUILDING_VENDOR_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # NOTICE files |
| # |
| # We are required to publish the licenses for all code under BSD, GPL and |
| # Apache licenses (and possibly other more exotic ones as well). We err on the |
| # side of caution, so the licenses for other third-party code are included here |
| # too. |
| # |
| # This needs to be before the systemimage rules, because it adds to |
| # ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files |
| # go into the systemimage. |
| |
| .PHONY: notice_files |
| |
| # Create the rule to combine the files into text and html/xml forms |
| # $(1) - xml_excluded_system_product_odm_vendor_dlkm_odm_dlkm| |
| # xml_excluded_vendor_product_odm_vendor_dlkm_odm_dlkm| |
| # xml_product|xml_odm|xml_system_ext|xml_system|xml_vendor_dlkm| |
| # xml_odm_dlkm|html |
| # $(2) - Plain text output file |
| # $(3) - HTML/XML output file |
| # $(4) - File title |
| # $(5) - Directory to use. Notice files are all $(5)/src. Other |
| # directories in there will be used for scratch |
| # $(6) - Dependencies for the output files |
| # $(7) - Directories to exclude |
| # |
| # The algorithm here is that we go collect a hash for each of the notice |
| # files and write the names of the files that match that hash. Then |
| # to generate the real files, we go print out all of the files and their |
| # hashes. |
| # |
| # These rules are fairly complex, so they depend on this makefile so if |
| # it changes, they'll run again. |
| # |
| # TODO: We could clean this up so that we just record the locations of the |
| # original notice files instead of making rules to copy them somwehere. |
| # Then we could traverse that without quite as much bash drama. |
| define combine-notice-files |
| $(2): PRIVATE_MESSAGE := $(4) |
| $(2): PRIVATE_DIR := $(5) |
| $(2): .KATI_IMPLICIT_OUTPUTS := $(3) |
| $(2): $(6) $(BUILD_SYSTEM)/Makefile build/make/tools/generate-notice-files.py |
| build/make/tools/generate-notice-files.py --text-output $(2) $(foreach xdir, $(7), -e $(xdir) )\ |
| $(if $(filter $(1),xml_excluded_vendor_product_odm_vendor_dlkm_odm_dlkm),-e vendor -e product -e system_ext -e odm -e vendor_dlkm -e odm_dlkm --xml-output, \ |
| $(if $(filter $(1),xml_excluded_system_product_odm_vendor_dlkm_odm_dlkm),-e system -e product -e system_ext -e odm -e vendor_dlkm -e odm_dlkm --xml-output, \ |
| $(if $(filter $(1),xml_product),-i product --xml-output, \ |
| $(if $(filter $(1),xml_system_ext),-i system_ext --xml-output, \ |
| $(if $(filter $(1),xml_system),-i system --xml-output, \ |
| $(if $(filter $(1),xml_odm),-i odm --xml-output, \ |
| $(if $(filter $(1),xml_vendor_dlkm),-i vendor_dlkm --xml-output, \ |
| $(if $(filter $(1),xml_odm_dlkm),-i odm_dlkm --xml-output, \ |
| --html-output)))))))) $(3) \ |
| -t $$(PRIVATE_MESSAGE) $$(foreach dir,$$(sort $$(PRIVATE_DIR)), -s $$(dir)/src) |
| notice_files: $(2) $(3) |
| endef |
| |
| # Notice file logic isn't relevant for TARGET_BUILD_APPS |
| ifndef TARGET_BUILD_APPS |
| |
| # TODO These intermediate NOTICE.txt/NOTICE.html files should go into |
| # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from |
| # the src subdirectory. |
| target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html |
| kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt |
| winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt |
| |
| # Some targets get included under $(PRODUCT_OUT) for debug symbols or other |
| # reasons--not to be flashed onto any device. Targets under these directories |
| # need no associated notice file on the device UI. |
| exclude_target_dirs := apex |
| |
| # TODO(b/69865032): Make PRODUCT_NOTICE_SPLIT the default behavior. |
| ifneq ($(PRODUCT_NOTICE_SPLIT),true) |
| target_notice_file_html := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html |
| target_notice_file_html_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz |
| $(eval $(call combine-notice-files, html, \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_html), \ |
| "Notices for files contained in the filesystem images in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file), \ |
| $(exclude_target_dirs))) |
| $(target_notice_file_html_gz): $(target_notice_file_html) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_html_gz) |
| $(copy-file-to-target) |
| |
| $(call declare-0p-target,$(target_notice_file_html_gz)) |
| $(call declare-0p-target,$(installed_notice_html_or_xml_gz)) |
| else |
| target_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml |
| target_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.xml.gz |
| |
| target_vendor_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.txt |
| target_vendor_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml |
| target_vendor_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml.gz |
| installed_vendor_notice_xml_gz := $(TARGET_OUT_VENDOR)/etc/NOTICE.xml.gz |
| |
| target_product_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.txt |
| target_product_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml |
| target_product_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml.gz |
| installed_product_notice_xml_gz := $(TARGET_OUT_PRODUCT)/etc/NOTICE.xml.gz |
| |
| target_system_ext_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.txt |
| target_system_ext_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.xml |
| target_system_ext_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.xml.gz |
| installed_system_ext_notice_xml_gz := $(TARGET_OUT_SYSTEM_EXT)/etc/NOTICE.xml.gz |
| |
| target_odm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.txt |
| target_odm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.xml |
| target_odm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.xml.gz |
| installed_odm_notice_xml_gz := $(TARGET_OUT_ODM)/etc/NOTICE.xml.gz |
| |
| target_vendor_dlkm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR_DLKM.txt |
| target_vendor_dlkm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR_DLKM.xml |
| target_vendor_dlkm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR_DLKM.xml.gz |
| installed_vendor_dlkm_notice_xml_gz := $(TARGET_OUT_VENDOR_DLKM)/etc/NOTICE.xml.gz |
| |
| target_odm_dlkm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM_DLKM.txt |
| target_odm_dlkm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM_DLKM.xml |
| target_odm_dlkm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM_DLKM.xml.gz |
| installed_odm_dlkm_notice_xml_gz := $(TARGET_OUT_ODM_DLKM)/etc/NOTICE.xml.gz |
| |
| target_system_dlkm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_DLKM.txt |
| target_system_dlkm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_DLKM.xml |
| target_system_dlkm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_DLKM.xml.gz |
| installed_system_dlkm_notice_xml_gz := $(TARGET_OUT_SYSTEM_DLKM)/etc/NOTICE.xml.gz |
| |
| # Notice files are copied to TARGET_OUT_NOTICE_FILES as a side-effect of their module |
| # being built. A notice xml file must depend on all modules that could potentially |
| # install a license file relevant to it. |
| license_modules := $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) |
| # Only files copied to a system image need system image notices. |
| license_modules := $(filter $(PRODUCT_OUT)/%,$(license_modules)) |
| # Phonys/fakes don't have notice files (though their deps might) |
| license_modules := $(filter-out $(TARGET_OUT_FAKE)/%,$(license_modules)) |
| # testcases are not relevant to the system image. |
| license_modules := $(filter-out $(TARGET_OUT_TESTCASES)/%,$(license_modules)) |
| # filesystem images: system, vendor, product, system_ext, odm, vendor_dlkm, and odm_dlkm |
| license_modules_system := $(filter $(TARGET_OUT)/%,$(license_modules)) |
| # system_other is relevant to system partition. |
| license_modules_system += $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,$(license_modules)) |
| license_modules_vendor := $(filter $(TARGET_OUT_VENDOR)/%,$(license_modules)) |
| license_modules_product := $(filter $(TARGET_OUT_PRODUCT)/%,$(license_modules)) |
| license_modules_system_ext := $(filter $(TARGET_OUT_SYSTEM_EXT)/%,$(license_modules)) |
| license_modules_odm := $(filter $(TARGET_OUT_ODM)/%,$(license_modules)) |
| license_modules_vendor_dlkm := $(filter $(TARGET_OUT_VENDOR_DLKM)/%,$(license_modules)) |
| license_modules_odm_dlkm := $(filter $(TARGET_OUT_ODM_DLKM)/%,$(license_modules)) |
| license_modules_odm_dlkm := $(filter $(TARGET_OUT_SYSTEM_DLKM)/%,$(license_modules)) |
| license_modules_agg := $(license_modules_system) \ |
| $(license_modules_vendor) \ |
| $(license_modules_product) \ |
| $(license_modules_system_ext) \ |
| $(license_modules_odm) \ |
| $(license_modules_vendor_dlkm) \ |
| $(license_modules_odm_dlkm) \ |
| $(license_modules_system_dlkm) |
| # targets used for debug symbols only and do not get copied to the device |
| license_modules_symbols_only := $(filter $(PRODUCT_OUT)/apex/%,$(license_modules)) |
| |
| license_modules_rest := $(filter-out $(license_modules_agg),$(license_modules)) |
| license_modules_rest := $(filter-out $(license_modules_symbols_only),$(license_modules_rest)) |
| |
| # Identify the other targets we expect to have notices for: |
| # targets copied to the device but are not readable by the UI (e.g. must boot |
| # into a different partition to read or don't have an associated /etc |
| # directory) must have their notices built somewhere readable. |
| license_modules_rehomed := $(filter-out $(PRODUCT_OUT)/%/%,$(license_modules_rest)) # files in root have no /etc |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/recovery/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/root/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/data/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/debug_ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/vendor_ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/persist/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/persist.img,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/system_other/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/kernel%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/%.img,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/%.bin,$(license_modules_rest)) |
| |
| # after removing targets in system images, targets reported in system images, and |
| # targets used for debug symbols that do not need notices, nothing must remain. |
| license_modules_rest := $(filter-out $(license_modules_rehomed),$(license_modules_rest)) |
| $(call maybe-print-list-and-error, $(license_modules_rest), \ |
| "Targets added under $(PRODUCT_OUT)/ unaccounted for notice handling.") |
| |
| # If we are building in a configuration that includes a prebuilt vendor.img, we can't |
| # update its notice file, so include those notices in the system partition instead |
| ifdef BOARD_PREBUILT_VENDORIMAGE |
| license_modules_system += $(license_modules_rehomed) |
| system_xml_directories := xml_excluded_vendor_product_odm_vendor_dlkm_odm_dlkm |
| system_notice_file_message := "Notices for files contained in all filesystem images except vendor/system_ext/product/odm/vendor_dlkm/odm_dlkm in this directory:" |
| else |
| license_modules_vendor += $(license_modules_rehomed) |
| system_xml_directories := xml_system |
| system_notice_file_message := "Notices for files contained in the system filesystem image in this directory:" |
| endif |
| |
| $(eval $(call combine-notice-files, $(system_xml_directories), \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_xml), \ |
| $(system_notice_file_message), \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_excluded_system_product_odm_vendor_dlkm_odm_dlkm, \ |
| $(target_vendor_notice_file_txt), \ |
| $(target_vendor_notice_file_xml), \ |
| "Notices for files contained in all filesystem images except system/system_ext/product/odm/vendor_dlkm/odm_dlkm in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_vendor), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_product, \ |
| $(target_product_notice_file_txt), \ |
| $(target_product_notice_file_xml), \ |
| "Notices for files contained in the product filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_product), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_system_ext, \ |
| $(target_system_ext_notice_file_txt), \ |
| $(target_system_ext_notice_file_xml), \ |
| "Notices for files contained in the system_ext filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system_ext), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_odm, \ |
| $(target_odm_notice_file_txt), \ |
| $(target_odm_notice_file_xml), \ |
| "Notices for files contained in the odm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_odm), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_vendor_dlkm, \ |
| $(target_vendor_dlkm_notice_file_txt), \ |
| $(target_vendor_dlkm_notice_file_xml), \ |
| "Notices for files contained in the vendor_dlkm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_vendor_dlkm), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_odm_dlkm, \ |
| $(target_odm_dlkm_notice_file_txt), \ |
| $(target_odm_dlkm_notice_file_xml), \ |
| "Notices for files contained in the odm_dlkm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_odm_dlkm), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_system_dlkm, \ |
| $(target_system_dlkm_notice_file_txt), \ |
| $(target_system_dlkm_notice_file_xml), \ |
| "Notices for files contained in the system_dlkm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system_dlkm), \ |
| $(exclude_target_dirs))) |
| |
| $(target_notice_file_xml_gz): $(target_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_vendor_notice_file_xml_gz): $(target_vendor_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_product_notice_file_xml_gz): $(target_product_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_system_ext_notice_file_xml_gz): $(target_system_ext_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_odm_notice_file_xml_gz): $(target_odm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_vendor_dlkm_notice_file_xml_gz): $(target_vendor_dlkm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_odm_dlkm_notice_file_xml_gz): $(target_odm_dlkm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_system_dlkm_notice_file_xml_gz): $(target_system_dlkm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_vendor_notice_xml_gz): $(target_vendor_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_product_notice_xml_gz): $(target_product_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_system_ext_notice_xml_gz): $(target_system_ext_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_odm_notice_xml_gz): $(target_odm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_vendor_dlkm_notice_xml_gz): $(target_vendor_dlkm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_odm_dlkm_notice_xml_gz): $(target_odm_dlkm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_system_dlkm_notice_xml_gz): $(target_system_dlkm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| |
| $(call declare-0p-target,$(target_notice_file_xml)) |
| $(call declare-0p-target,$(target_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_vendor_notice_file_xml)) |
| $(call declare-0p-target,$(target_vendor_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_product_notice_file_xml)) |
| $(call declare-0p-target,$(target_product_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_system_ext_notice_file_xml)) |
| $(call declare-0p-target,$(target_system_ext_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_odm_notice_file_xml)) |
| $(call declare-0p-target,$(target_odm_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_vendor_dlkm_notice_file_xml)) |
| $(call declare-0p-target,$(target_vendor_dlkm_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_odm_dlkm_notice_file_xml)) |
| $(call declare-0p-target,$(target_odm_dlkm_notice_file_xml_gz)) |
| $(call declare-0p-target,$(target_system_dlkm_notice_file_xml)) |
| $(call declare-0p-target,$(target_system_dlkm_notice_file_xml_gz)) |
| $(call declare-0p-target,$(installed_notice_html_or_xml_gz)) |
| $(call declare-0p-target,$(installed_vendor_notice_xml_gz)) |
| $(call declare-0p-target,$(installed_product_notice_xml_gz)) |
| $(call declare-0p-target,$(installed_system_ext_notice_xml_gz)) |
| $(call declare-0p-target,$(installed_odm_notice_xml_gz)) |
| $(call declare-0p-target,$(installed_vendor_dlkm_notice_xml_gz)) |
| $(call declare-0p-target,$(installed_odm_dlkm_notice_xml_gz)) |
| $(call declare-0p-target,$(installed_sysetm_dlkm_notice_xml_gz)) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_product_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_system_ext_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_odm_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_dlkm_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_odm_dlkm_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_system_dlkm_notice_xml_gz) |
| endif # PRODUCT_NOTICE_SPLIT |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| |
| $(eval $(call combine-notice-files, html, \ |
| $(tools_notice_file_txt), \ |
| $(tools_notice_file_html), \ |
| "Notices for files contained in the tools directory:", \ |
| $(HOST_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(winpthreads_notice_file), \ |
| $(exclude_target_dirs))) |
| |
| endif # TARGET_BUILD_APPS |
| |
| # The kernel isn't really a module, so to get its module file in there, we |
| # make the target NOTICE files depend on this particular file too, which will |
| # then be in the right directory for the find in combine-notice-files to work. |
| $(eval $(call copy-one-file,$(BUILD_SYSTEM)/LINUX_KERNEL_COPYING,$(kernel_notice_file))) |
| |
| $(eval $(call copy-one-file,$(BUILD_SYSTEM)/WINPTHREADS_COPYING,$(winpthreads_notice_file))) |
| |
| |
| # ################################################################# |
| # Targets for user images |
| # ################################################################# |
| |
| INTERNAL_USERIMAGES_EXT_VARIANT := |
| ifeq ($(TARGET_USERIMAGES_USE_EXT2),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext2 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT3),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext3 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT4),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext4 |
| endif |
| endif |
| endif |
| |
| # These options tell the recovery updater/installer how to mount the partitions writebale. |
| # <fstype>=<fstype_opts>[|<fstype_opts>]... |
| # fstype_opts := <opt>[,<opt>]... |
| # opt := <name>[=<value>] |
| # The following worked on Nexus devices with Kernel 3.1, 3.4, 3.10 |
| DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS := ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc |
| |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EROFS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EROFS_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_SQUASHFS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_F2FS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG := -S |
| endif |
| |
| INTERNAL_USERIMAGES_DEPS := \ |
| $(BUILD_IMAGE) \ |
| $(MKE2FS_CONF) \ |
| $(MKEXTUSERIMG) |
| |
| ifeq ($(TARGET_USERIMAGES_USE_F2FS),true) |
| INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) |
| endif |
| |
| ifneq ($(filter \ |
| $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEM_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| ,erofs),) |
| INTERNAL_USERIMAGES_DEPS += $(MKEROFSUSERIMG) |
| BOARD_EROFS_COMPRESSOR ?= "lz4hc,9" |
| endif |
| |
| ifneq ($(filter \ |
| $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| $(BOARD_SYSTEM_DLKMIMAGE_FILE_SYSTEM_TYPE) \ |
| ,squashfs),) |
| INTERNAL_USERIMAGES_DEPS += $(MKSQUASHFSUSERIMG) |
| endif |
| |
| ifeq (true,$(PRODUCT_SUPPORTS_VERITY)) |
| INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_METADATA) $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER) |
| ifeq (true,$(PRODUCT_SUPPORTS_VERITY_FEC)) |
| INTERNAL_USERIMAGES_DEPS += $(FEC) |
| endif |
| endif |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INTERNAL_USERIMAGES_DEPS += $(AVBTOOL) |
| endif |
| |
| # Get a colon-separated list of search paths. |
| INTERNAL_USERIMAGES_BINARY_PATHS := $(subst $(space),:,$(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))) |
| |
| # Collects file_contexts files from modules to be installed |
| $(call merge-fc-files, \ |
| $(sort $(foreach m,$(product_MODULES),$(ALL_MODULES.$(m).FILE_CONTEXTS))),\ |
| $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.modules.tmp) |
| |
| SELINUX_FC := $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.bin |
| |
| INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC) |
| |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| $(error vboot 1.0 doesn't support logical partition) |
| endif |
| |
| endif # PRODUCT_USE_DYNAMIC_PARTITIONS |
| |
| # $(1) the partition name (eg system) |
| # $(2) the image prop file |
| define add-common-flags-to-image-props |
| $(eval _var := $(call to-upper,$(1))) |
| $(hide) echo "$(1)_selinux_fc=$(SELINUX_FC)" >> $(2) |
| $(hide) echo "building_$(1)_image=$(BUILDING_$(_var)_IMAGE)" >> $(2) |
| endef |
| |
| # $(1) the partition name (eg system) |
| # $(2) the image prop file |
| define add-common-ro-flags-to-image-props |
| $(eval _var := $(call to-upper,$(1))) |
| $(if $(BOARD_$(_var)IMAGE_EROFS_COMPRESSOR),$(hide) echo "$(1)_erofs_compressor=$(BOARD_$(_var)IMAGE_EROFS_COMPRESSOR)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_EROFS_PCLUSTER_SIZE),$(hide) echo "$(1)_erofs_pcluster_size=$(BOARD_$(_var)IMAGE_EROFS_PCLUSTER_SIZE)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_EXTFS_INODE_COUNT),$(hide) echo "$(1)_extfs_inode_count=$(BOARD_$(_var)IMAGE_EXTFS_INODE_COUNT)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_EXTFS_RSV_PCT),$(hide) echo "$(1)_extfs_rsv_pct=$(BOARD_$(_var)IMAGE_EXTFS_RSV_PCT)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_F2FS_SLOAD_COMPRESS_FLAGS),$(hide) echo "$(1)_f2fs_sldc_flags=$(BOARD_$(_var)IMAGE_F2FS_SLOAD_COMPRESS_FLAGS)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_FILE_SYSTEM_COMPRESS),$(hide) echo "$(1)_f2fs_compress=$(BOARD_$(_var)IMAGE_FILE_SYSTEM_COMPRESS)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_FILE_SYSTEM_TYPE),$(hide) echo "$(1)_fs_type=$(BOARD_$(_var)IMAGE_FILE_SYSTEM_TYPE)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_JOURNAL_SIZE),$(hide) echo "$(1)_journal_size=$(BOARD_$(_var)IMAGE_JOURNAL_SIZE)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "$(1)_reserved_size=$(BOARD_$(_var)IMAGE_PARTITION_RESERVED_SIZE)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_PARTITION_SIZE),$(hide) echo "$(1)_size=$(BOARD_$(_var)IMAGE_PARTITION_SIZE)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "$(1)_squashfs_block_size=$(BOARD_$(_var)IMAGE_SQUASHFS_BLOCK_SIZE)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "$(1)_squashfs_compressor=$(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "$(1)_squashfs_compressor_opt=$(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(2)) |
| $(if $(BOARD_$(_var)IMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "$(1)_squashfs_disable_4k_align=$(BOARD_$(_var)IMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(2)) |
| $(if $(PRODUCT_$(_var)_BASE_FS_PATH),$(hide) echo "$(1)_base_fs_file=$(PRODUCT_$(_var)_BASE_FS_PATH)" >> $(2)) |
| $(eval _size := $(BOARD_$(_var)IMAGE_PARTITION_SIZE)) |
| $(eval _reserved := $(BOARD_$(_var)IMAGE_PARTITION_RESERVED_SIZE)) |
| $(eval _headroom := $(PRODUCT_$(_var)_HEADROOM)) |
| $(if $(or $(_size), $(_reserved), $(_headroom)),, |
| $(hide) echo "$(1)_disable_sparse=true" >> $(2)) |
| $(call add-common-flags-to-image-props,$(1),$(2)) |
| endef |
| |
| # $(1): the path of the output dictionary file |
| # $(2): a subset of "system vendor cache userdata product system_ext oem odm vendor_dlkm odm_dlkm system_dlkm" |
| # $(3): additional "key=value" pairs to append to the dictionary file. |
| define generate-image-prop-dictionary |
| $(if $(filter $(2),system),\ |
| $(if $(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE),$(hide) echo "system_other_size=$(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCT_SYSTEM_HEADROOM)" >> $(1)) |
| $(call add-common-ro-flags-to-image-props,system,$(1)) |
| ) |
| $(if $(filter $(2),system_other),\ |
| $(hide) echo "building_system_other_image=$(BUILDING_SYSTEM_OTHER_IMAGE)" >> $(1) |
| $(if $(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE),, |
| $(hide) echo "system_other_disable_sparse=true" >> $(1)) |
| ) |
| $(if $(filter $(2),userdata),\ |
| $(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(PRODUCT_FS_CASEFOLD),$(hide) echo "needs_casefold=$(PRODUCT_FS_CASEFOLD)" >> $(1)) |
| $(if $(PRODUCT_QUOTA_PROJID),$(hide) echo "needs_projid=$(PRODUCT_QUOTA_PROJID)" >> $(1)) |
| $(if $(PRODUCT_FS_COMPRESSION),$(hide) echo "needs_compress=$(PRODUCT_FS_COMPRESSION)" >> $(1)) |
| $(call add-common-flags-to-image-props,userdata,$(1)) |
| ) |
| $(if $(filter $(2),cache),\ |
| $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(call add-common-flags-to-image-props,cache,$(1)) |
| ) |
| $(if $(filter $(2),vendor),\ |
| $(call add-common-ro-flags-to-image-props,vendor,$(1)) |
| ) |
| $(if $(filter $(2),product),\ |
| $(call add-common-ro-flags-to-image-props,product,$(1)) |
| ) |
| $(if $(filter $(2),system_ext),\ |
| $(call add-common-ro-flags-to-image-props,system_ext,$(1)) |
| ) |
| $(if $(filter $(2),odm),\ |
| $(call add-common-ro-flags-to-image-props,odm,$(1)) |
| ) |
| $(if $(filter $(2),vendor_dlkm),\ |
| $(call add-common-ro-flags-to-image-props,vendor_dlkm,$(1)) |
| ) |
| $(if $(filter $(2),odm_dlkm),\ |
| $(call add-common-ro-flags-to-image-props,odm_dlkm,$(1)) |
| ) |
| $(if $(filter $(2),system_dlkm),\ |
| $(call add-common-ro-flags-to-image-props,system_dlkm,$(1)) |
| ) |
| $(if $(filter $(2),oem),\ |
| $(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "oem_extfs_rsv_pct=$(BOARD_OEMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(call add-common-flags-to-image-props,oem,$(1)) |
| ) |
| $(hide) echo "ext_mkuserimg=$(notdir $(MKEXTUSERIMG))" >> $(1) |
| |
| $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EROFS_FLAG),$(hide) echo "erofs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EROFS_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG),$(hide) echo "f2fs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG)" >> $(1)) |
| $(if $(BOARD_EROFS_COMPRESSOR),$(hide) echo "erofs_default_compressor=$(BOARD_EROFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_EROFS_PCLUSTER_SIZE),$(hide) echo "erofs_pcluster_size=$(BOARD_EROFS_PCLUSTER_SIZE)" >> $(1)) |
| $(if $(BOARD_EROFS_SHARE_DUP_BLOCKS),$(hide) echo "erofs_share_dup_blocks=$(BOARD_EROFS_SHARE_DUP_BLOCKS)" >> $(1)) |
| $(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1)) |
| $(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCT_SUPPORTS_VERITY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCT_VERITY_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(notdir $(VERITY_SIGNER))" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY_FEC),$(hide) echo "verity_fec=$(PRODUCT_SUPPORTS_VERITY_FEC)" >> $(1)) |
| $(if $(filter eng, $(TARGET_BUILD_VARIANT)),$(hide) echo "verity_disable=true" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_PRODUCT_VERITY_PARTITION),$(hide) echo "product_verity_block_device=$(PRODUCT_PRODUCT_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_EXT_VERITY_PARTITION),$(hide) echo "system_ext_verity_block_device=$(PRODUCT_SYSTEM_EXT_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_DLKM_VERITY_PARTITION),$(hide) echo "vendor_dlkm_verity_block_device=$(PRODUCT_VENDOR_DLKM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_ODM_DLKM_VERITY_PARTITION),$(hide) echo "odm_dlkm_verity_block_device=$(PRODUCT_ODM_DLKM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_DLKM_VERITY_PARTITION),$(hide) echo "system_dlkm_verity_block_device=$(PRODUCT_SYSTEM_DLKM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCT_SUPPORTS_VBOOT)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCT_VBOOT_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_subkey=$(PRODUCT_VBOOT_SIGNING_SUBKEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "futility=$(notdir $(FUTILITY))" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_signer_cmd=$(VBOOT_SIGNER)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_avbtool=$(notdir $(AVBTOOL))" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) echo "avb_system_key_path=$(BOARD_AVB_SYSTEM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_algorithm=$(BOARD_AVB_SYSTEM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_rollback_index_location=$(BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_other_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_other_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_OTHER_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH),\ |
| $(hide) echo "avb_system_other_key_path=$(BOARD_AVB_SYSTEM_OTHER_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_other_algorithm=$(BOARD_AVB_SYSTEM_OTHER_ALGORITHM)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) echo "avb_vendor_key_path=$(BOARD_AVB_VENDOR_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_vendor_algorithm=$(BOARD_AVB_VENDOR_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_vendor_rollback_index_location=$(BOARD_AVB_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_add_hashtree_footer_args=$(BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ |
| $(hide) echo "avb_product_key_path=$(BOARD_AVB_PRODUCT_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_product_algorithm=$(BOARD_AVB_PRODUCT_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_product_rollback_index_location=$(BOARD_AVB_PRODUCT_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_ext_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_system_ext_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_EXT_KEY_PATH),\ |
| $(hide) echo "avb_system_ext_key_path=$(BOARD_AVB_SYSTEM_EXT_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_ext_algorithm=$(BOARD_AVB_SYSTEM_EXT_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_ext_rollback_index_location=$(BOARD_AVB_SYSTEM_EXT_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_add_hashtree_footer_args=$(BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_ODM_KEY_PATH),\ |
| $(hide) echo "avb_odm_key_path=$(BOARD_AVB_ODM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_odm_algorithm=$(BOARD_AVB_ODM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_odm_rollback_index_location=$(BOARD_AVB_ODM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_dlkm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_vendor_dlkm_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_VENDOR_DLKM_KEY_PATH),\ |
| $(hide) echo "avb_vendor_dlkm_key_path=$(BOARD_AVB_VENDOR_DLKM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_vendor_dlkm_algorithm=$(BOARD_AVB_VENDOR_DLKM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_vendor_dlkm_rollback_index_location=$(BOARD_AVB_VENDOR_DLKM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_dlkm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_odm_dlkm_add_hashtree_footer_args=$(BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_ODM_DLKM_KEY_PATH),\ |
| $(hide) echo "avb_odm_dlkm_key_path=$(BOARD_AVB_ODM_DLKM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_odm_dlkm_algorithm=$(BOARD_AVB_ODM_DLKM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_odm_dlkm_rollback_index_location=$(BOARD_AVB_ODM_DLKM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_dlkm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_system_dlkm_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_DLKM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_DLKM_KEY_PATH),\ |
| $(hide) echo "avb_system_dlkm_key_path=$(BOARD_AVB_SYSTEM_DLKM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_dlkm_algorithm=$(BOARD_AVB_SYSTEM_DLKM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_dlkm_rollback_index_location=$(BOARD_SYSTEM_SYSTEM_DLKM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(hide) echo "recovery_as_boot=true" >> $(1)) |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\ |
| $(hide) echo "system_root_image=true" >> $(1)) |
| $(hide) echo "root_dir=$(TARGET_ROOT_OUT)" >> $(1) |
| $(if $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITION_SIZE)),\ |
| $(hide) echo "use_dynamic_partition_size=true" >> $(1)) |
| $(if $(3),$(hide) $(foreach kv,$(3),echo "$(kv)" >> $(1);)) |
| endef |
| |
| # $(1): the path of the output dictionary file |
| # $(2): additional "key=value" pairs to append to the dictionary file. |
| PROP_DICTIONARY_IMAGES := oem |
| ifdef BUILDING_CACHE_IMAGE |
| PROP_DICTIONARY_IMAGES += cache |
| endif |
| ifdef BUILDING_SYSTEM_IMAGE |
| PROP_DICTIONARY_IMAGES += system |
| endif |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| PROP_DICTIONARY_IMAGES += system_other |
| endif |
| ifdef BUILDING_USERDATA_IMAGE |
| PROP_DICTIONARY_IMAGES += userdata |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| PROP_DICTIONARY_IMAGES += vendor |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| PROP_DICTIONARY_IMAGES += product |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| PROP_DICTIONARY_IMAGES += system_ext |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| PROP_DICTIONARY_IMAGES += odm |
| endif |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| PROP_DICTIONARY_IMAGES += vendor_dlkm |
| endif |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| PROP_DICTIONARY_IMAGES += odm_dlkm |
| endif |
| ifdef BUILDING_SYSTEM_DLKM_IMAGE |
| PROP_DICTIONARY_IMAGES += system_dlkm |
| endif |
| define generate-userimage-prop-dictionary |
| $(call generate-image-prop-dictionary,$(1),$(PROP_DICTIONARY_IMAGES),$(2)) |
| endef |
| |
| # $(1): the path of the input dictionary file, where each line has the format key=value |
| # $(2): the key to look up |
| define read-image-prop-dictionary |
| $$(grep '$(2)=' $(1) | cut -f2- -d'=') |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Recovery image |
| |
| # Recovery image exists if we are building recovery, or building recovery as boot. |
| ifdef BUILDING_RECOVERY_IMAGE |
| |
| INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_RECOVERY := $(PRODUCT_OUT)/installed-files-recovery.txt |
| INSTALLED_FILES_JSON_RECOVERY := $(INSTALLED_FILES_FILE_RECOVERY:.txt=.json) |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET) |
| endif |
| |
| # TODO(b/30414428): Can't depend on INTERNAL_RECOVERYIMAGE_FILES alone like other |
| # INSTALLED_FILES_FILE_* rules. Because currently there're cp/rsync/rm commands in |
| # build-recoveryimage-target, which would touch the files under TARGET_RECOVERY_OUT and race with |
| # the call to FILELIST. |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| |
| $(INSTALLED_FILES_FILE_RECOVERY): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RECOVERY) |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INTERNAL_RECOVERYIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_RECOVERY_ROOT_OUT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| recovery_sepolicy := \ |
| $(TARGET_RECOVERY_ROOT_OUT)/sepolicy \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_service_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_service_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_service_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/odm_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/odm_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_service_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_property_contexts |
| |
| # Passed into rsync from non-recovery root to recovery root, to avoid overwriting recovery-specific |
| # SELinux files |
| IGNORE_RECOVERY_SEPOLICY := $(patsubst $(TARGET_RECOVERY_OUT)/%,--exclude=/%,$(recovery_sepolicy)) |
| |
| # if building multiple boot images from multiple kernels, use the first kernel listed |
| # for the recovery image |
| recovery_kernel := $(firstword $(INSTALLED_KERNEL_TARGET)) |
| recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img |
| recovery_resources_common := bootable/recovery/res |
| |
| # Set recovery_density to a density bucket based on TARGET_SCREEN_DENSITY, PRODUCT_AAPT_PREF_CONFIG, |
| # or mdpi, in order of preference. We support both specific buckets (e.g. xdpi) and numbers, |
| # which get remapped to a bucket. |
| recovery_density := $(or $(TARGET_SCREEN_DENSITY),$(PRODUCT_AAPT_PREF_CONFIG),mdpi) |
| ifeq (,$(filter xxxhdpi xxhdpi xhdpi hdpi mdpi,$(recovery_density))) |
| recovery_density_value := $(patsubst %dpi,%,$(recovery_density)) |
| # We roughly use the medium point between the primary densities to split buckets. |
| # ------160------240------320----------480------------640------ |
| # mdpi hdpi xhdpi xxhdpi xxxhdpi |
| recovery_density := $(strip \ |
| $(or $(if $(filter $(shell echo $$(($(recovery_density_value) >= 560))),1),xxxhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 400))),1),xxhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 280))),1),xhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 200))),1),hdpi,mdpi))) |
| endif |
| |
| ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density))) |
| recovery_resources_common := $(recovery_resources_common)-$(recovery_density) |
| else |
| recovery_resources_common := $(recovery_resources_common)-xhdpi |
| endif |
| |
| # Select the 18x32 font on high-density devices (xhdpi and up); and the 12x22 font on other devices. |
| # Note that the font selected here can be overridden for a particular device by putting a font.png |
| # in its private recovery resources. |
| ifneq (,$(filter xxxhdpi xxhdpi xhdpi,$(recovery_density))) |
| recovery_font := bootable/recovery/fonts/18x32.png |
| else |
| recovery_font := bootable/recovery/fonts/12x22.png |
| endif |
| |
| |
| # We will only generate the recovery background text images if the variable |
| # TARGET_RECOVERY_UI_SCREEN_WIDTH is defined. For devices with xxxhdpi and xxhdpi, we set the |
| # variable to the commonly used values here, if it hasn't been intialized elsewhere. While for |
| # devices with lower density, they must have TARGET_RECOVERY_UI_SCREEN_WIDTH defined in their |
| # BoardConfig in order to use this feature. |
| ifeq ($(recovery_density),xxxhdpi) |
| TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1440 |
| else ifeq ($(recovery_density),xxhdpi) |
| TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1080 |
| endif |
| |
| ifneq ($(TARGET_RECOVERY_UI_SCREEN_WIDTH),) |
| # Subtracts the margin width and menu indent from the screen width; it's safe to be conservative. |
| ifeq ($(TARGET_RECOVERY_UI_MARGIN_WIDTH),) |
| recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - 10)) |
| else |
| recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - $(TARGET_RECOVERY_UI_MARGIN_WIDTH) - 10)) |
| endif |
| |
| |
| RECOVERY_INSTALLING_TEXT_FILE := $(call intermediates-dir-for,ETC,recovery_text_res)/installing_text.png |
| RECOVERY_INSTALLING_SECURITY_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/installing_security_text.png |
| RECOVERY_ERASING_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/erasing_text.png |
| RECOVERY_ERROR_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/error_text.png |
| RECOVERY_NO_COMMAND_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/no_command_text.png |
| |
| RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/cancel_wipe_data_text.png |
| RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/factory_data_reset_text.png |
| RECOVERY_TRY_AGAIN_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/try_again_text.png |
| RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_confirmation_text.png |
| RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_menu_header_text.png |
| |
| generated_recovery_text_files := \ |
| $(RECOVERY_INSTALLING_TEXT_FILE) \ |
| $(RECOVERY_INSTALLING_SECURITY_TEXT_FILE) \ |
| $(RECOVERY_ERASING_TEXT_FILE) \ |
| $(RECOVERY_ERROR_TEXT_FILE) \ |
| $(RECOVERY_NO_COMMAND_TEXT_FILE) \ |
| $(RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE) \ |
| $(RECOVERY_FACTORY_DATA_RESET_TEXT_FILE) \ |
| $(RECOVERY_TRY_AGAIN_TEXT_FILE) \ |
| $(RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE) \ |
| $(RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE) |
| |
| resource_dir := bootable/recovery/tools/recovery_l10n/res/ |
| resource_dir_deps := $(sort $(shell find $(resource_dir) -name *.xml -not -name .*)) |
| image_generator_jar := $(HOST_OUT_JAVA_LIBRARIES)/RecoveryImageGenerator.jar |
| zopflipng := $(HOST_OUT_EXECUTABLES)/zopflipng |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_SOURCE_FONTS := $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_FONT_FILES_DIR := $(call intermediates-dir-for,ETC,recovery_font_files) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RESOURCE_DIR := $(resource_dir) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_IMAGE_GENERATOR_JAR := $(image_generator_jar) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_ZOPFLIPNG := $(zopflipng) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_IMAGE_WIDTH := $(recovery_image_width) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST := \ |
| recovery_installing \ |
| recovery_installing_security \ |
| recovery_erasing \ |
| recovery_error \ |
| recovery_no_command |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST := \ |
| recovery_cancel_wipe_data \ |
| recovery_factory_data_reset \ |
| recovery_try_again \ |
| recovery_wipe_data_menu_header \ |
| recovery_wipe_data_confirmation |
| $(RECOVERY_INSTALLING_TEXT_FILE): .KATI_IMPLICIT_OUTPUTS := $(filter-out $(RECOVERY_INSTALLING_TEXT_FILE),$(generated_recovery_text_files)) |
| $(RECOVERY_INSTALLING_TEXT_FILE): $(image_generator_jar) $(resource_dir_deps) $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) $(zopflipng) |
| # Prepares the font directory. |
| @rm -rf $(PRIVATE_RECOVERY_FONT_FILES_DIR) |
| @mkdir -p $(PRIVATE_RECOVERY_FONT_FILES_DIR) |
| $(foreach filename,$(PRIVATE_SOURCE_FONTS), cp $(filename) $(PRIVATE_RECOVERY_FONT_FILES_DIR) &&) true |
| @rm -rf $(dir $@) |
| @mkdir -p $(dir $@) |
| $(foreach text_name,$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST) $(PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST), \ |
| $(eval output_file := $(dir $@)/$(patsubst recovery_%,%_text.png,$(text_name))) \ |
| $(eval center_alignment := $(if $(filter $(text_name),$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST)), --center_alignment)) \ |
| java -jar $(PRIVATE_IMAGE_GENERATOR_JAR) \ |
| --image_width $(PRIVATE_RECOVERY_IMAGE_WIDTH) \ |
| --text_name $(text_name) \ |
| --font_dir $(PRIVATE_RECOVERY_FONT_FILES_DIR) \ |
| --resource_dir $(PRIVATE_RESOURCE_DIR) \ |
| --output_file $(output_file) $(center_alignment) && \ |
| $(PRIVATE_ZOPFLIPNG) -y --iterations=1 --filters=0 $(output_file) $(output_file) > /dev/null &&) true |
| else |
| RECOVERY_INSTALLING_TEXT_FILE := |
| RECOVERY_INSTALLING_SECURITY_TEXT_FILE := |
| RECOVERY_ERASING_TEXT_FILE := |
| RECOVERY_ERROR_TEXT_FILE := |
| RECOVERY_NO_COMMAND_TEXT_FILE := |
| RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := |
| RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := |
| RECOVERY_TRY_AGAIN_TEXT_FILE := |
| RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := |
| RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := |
| endif # TARGET_RECOVERY_UI_SCREEN_WIDTH |
| |
| ifndef TARGET_PRIVATE_RES_DIRS |
| TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res) |
| endif |
| recovery_resource_deps := $(shell find $(recovery_resources_common) \ |
| $(TARGET_PRIVATE_RES_DIRS) -type f) |
| recovery_resource_deps += $(generated_recovery_text_files) |
| |
| |
| ifdef TARGET_RECOVERY_FSTAB |
| recovery_fstab := $(TARGET_RECOVERY_FSTAB) |
| else ifdef TARGET_RECOVERY_FSTAB_GENRULE |
| # Specifies a soong genrule module that generates an fstab. |
| recovery_fstab := $(call intermediates-dir-for,ETC,$(TARGET_RECOVERY_FSTAB_GENRULE))/$(TARGET_RECOVERY_FSTAB_GENRULE) |
| else |
| recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab)) |
| endif |
| ifdef TARGET_RECOVERY_WIPE |
| recovery_wipe := $(TARGET_RECOVERY_WIPE) |
| else |
| recovery_wipe := |
| endif |
| |
| # Traditionally with non-A/B OTA we have: |
| # boot.img + recovery-from-boot.p + recovery-resource.dat = recovery.img. |
| # recovery-resource.dat is needed only if we carry an imgdiff patch of the boot and recovery images |
| # and invoke install-recovery.sh on the first boot post an OTA update. |
| # |
| # We no longer need that if one of the following conditions holds: |
| # a) We carry a full copy of the recovery image - no patching needed |
| # (BOARD_USES_FULL_RECOVERY_IMAGE = true); |
| # b) We build a single image that contains boot and recovery both - no recovery image to install |
| # (BOARD_USES_RECOVERY_AS_BOOT = true); |
| # c) We mount the system image as / and therefore do not have a ramdisk in boot.img |
| # (BOARD_BUILD_SYSTEM_ROOT_IMAGE = true). |
| # d) We include the recovery DTBO image within recovery - not needing the resource file as we |
| # do bsdiff because boot and recovery will contain different number of entries |
| # (BOARD_INCLUDE_RECOVERY_DTBO = true). |
| # e) We include the recovery ACPIO image within recovery - not needing the resource file as we |
| # do bsdiff because boot and recovery will contain different number of entries |
| # (BOARD_INCLUDE_RECOVERY_ACPIO = true). |
| # f) We build a single image that contains vendor_boot and recovery both - no recovery image to |
| # install |
| # (BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT = true). |
| |
| ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT) \ |
| $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO) \ |
| $(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT))) |
| # Named '.dat' so we don't attempt to use imgdiff for patching it. |
| RECOVERY_RESOURCE_ZIP := $(TARGET_OUT_VENDOR)/etc/recovery-resource.dat |
| ALL_DEFAULT_INSTALLED_MODULES += $(RECOVERY_RESOURCE_ZIP) |
| else |
| RECOVERY_RESOURCE_ZIP := |
| endif |
| |
| INSTALLED_RECOVERY_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/prop.default |
| |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): PRIVATE_RECOVERY_UI_PROPERTIES := \ |
| TARGET_RECOVERY_UI_ANIMATION_FPS:animation_fps \ |
| TARGET_RECOVERY_UI_MARGIN_HEIGHT:margin_height \ |
| TARGET_RECOVERY_UI_MARGIN_WIDTH:margin_width \ |
| TARGET_RECOVERY_UI_MENU_UNUSABLE_ROWS:menu_unusable_rows \ |
| TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE:progress_bar_baseline \ |
| TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD:touch_low_threshold \ |
| TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD:touch_high_threshold \ |
| TARGET_RECOVERY_UI_VR_STEREO_OFFSET:vr_stereo_offset |
| |
| # Parses the given list of build variables and writes their values as build properties if defined. |
| # For example, if a target defines `TARGET_RECOVERY_UI_MARGIN_HEIGHT := 100`, |
| # `ro.recovery.ui.margin_height=100` will be appended to the given output file. |
| # $(1): Map from the build variable names to property names |
| # $(2): Output file |
| define append-recovery-ui-properties |
| echo "#" >> $(2) |
| echo "# RECOVERY UI BUILD PROPERTIES" >> $(2) |
| echo "#" >> $(2) |
| $(foreach prop,$(1), \ |
| $(eval _varname := $(call word-colon,1,$(prop))) \ |
| $(eval _propname := $(call word-colon,2,$(prop))) \ |
| $(eval _value := $($(_varname))) \ |
| $(if $(_value), \ |
| echo ro.recovery.ui.$(_propname)=$(_value) >> $(2) &&)) true |
| endef |
| |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): \ |
| $(INSTALLED_BUILD_PROP_TARGET) \ |
| $(INSTALLED_VENDOR_BUILD_PROP_TARGET) \ |
| $(INSTALLED_ODM_BUILD_PROP_TARGET) \ |
| $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) \ |
| $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) |
| @echo "Target recovery buildinfo: $@" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cat $(INSTALLED_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_VENDOR_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_ODM_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) >> $@ |
| $(call append-recovery-ui-properties,$(PRIVATE_RECOVERY_UI_PROPERTIES),$@) |
| |
| # Only install boot/etc/build.prop to recovery image on recovery_as_boot. |
| # On device with dedicated recovery partition, the file should come from the boot |
| # ramdisk. |
| ifeq (true,$(BOARD_USES_RECOVERY_AS_BOOT)) |
| INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/$(RAMDISK_BUILD_PROP_REL_PATH) |
| $(INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET): $(INSTALLED_RAMDISK_BUILD_PROP_TARGET) |
| $(copy-file-to-target) |
| endif |
| |
| INTERNAL_RECOVERYIMAGE_ARGS := --ramdisk $(recovery_ramdisk) |
| |
| ifneq (truetrue,$(strip $(BUILDING_VENDOR_BOOT_IMAGE))$(strip $(BOARD_USES_RECOVERY_AS_BOOT))) |
| INTERNAL_RECOVERYIMAGE_ARGS += $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) |
| # Assumes this has already been stripped |
| ifneq (true,$(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)) |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif # INTERNAL_KERNEL_CMDLINE != "" |
| endif # BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE != true |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_dtbo $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_dtbo $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif # BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_acpio $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_RECOVERYIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| endif # (BUILDING_VENDOR_BOOT_IMAGE and BOARD_USES_RECOVERY_AS_BOOT) |
| ifndef BOARD_RECOVERY_MKBOOTIMG_ARGS |
| BOARD_RECOVERY_MKBOOTIMG_ARGS := $(BOARD_MKBOOTIMG_ARGS) |
| endif |
| |
| $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) $(COMPRESSION_COMMAND_DEPS) \ |
| $(INTERNAL_ROOT_FILES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INTERNAL_RECOVERYIMAGE_FILES) \ |
| $(recovery_sepolicy) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET) \ |
| $(INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET) \ |
| $(recovery_resource_deps) \ |
| $(recovery_fstab) |
| # Making recovery image |
| mkdir -p $(TARGET_RECOVERY_OUT) |
| mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp |
| # Copying baseline ramdisk... |
| # Use rsync because "cp -Rf" fails to overwrite broken symlinks on Mac. |
| rsync -a --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT) |
| # Modifying ramdisk contents... |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),, \ |
| ln -sf /system/bin/init $(TARGET_RECOVERY_ROOT_OUT)/init) |
| # Removes $(TARGET_RECOVERY_ROOT_OUT)/init*.rc EXCEPT init.recovery*.rc. |
| find $(TARGET_RECOVERY_ROOT_OUT) -maxdepth 1 -name 'init*.rc' -type f -not -name "init.recovery.*.rc" | xargs rm -f |
| cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ 2> /dev/null || true # Ignore error when the src file doesn't exist. |
| mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res |
| rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/* |
| cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res |
| $(foreach recovery_text_file,$(generated_recovery_text_files), \ |
| cp -rf $(recovery_text_file) $(TARGET_RECOVERY_ROOT_OUT)/res/images/ &&) true |
| cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png |
| $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \ |
| cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline)) |
| $(foreach item,$(recovery_fstab), \ |
| cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.fstab) |
| $(if $(strip $(recovery_wipe)), \ |
| cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.wipe) |
| ln -sf prop.default $(TARGET_RECOVERY_ROOT_OUT)/default.prop |
| $(BOARD_RECOVERY_IMAGE_PREPARE) |
| $(hide) touch $@ |
| |
| $(recovery_ramdisk): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(COMPRESSION_COMMAND) > $(recovery_ramdisk) |
| |
| # $(1): output file |
| # $(2): optional kernel file |
| define build-recoveryimage-target |
| $(if $(filter true,$(PRODUCT_SUPPORTS_VBOOT)), \ |
| $(MKBOOTIMG) $(if $(strip $(2)),--kernel $(strip $(2))) $(INTERNAL_RECOVERYIMAGE_ARGS) \ |
| $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_RECOVERY_MKBOOTIMG_ARGS) \ |
| --output $(1).unsigned, \ |
| $(MKBOOTIMG) $(if $(strip $(2)),--kernel $(strip $(2))) $(INTERNAL_RECOVERYIMAGE_ARGS) \ |
| $(INTERNAL_MKBOOTIMG_VERSION_ARGS) \ |
| $(BOARD_RECOVERY_MKBOOTIMG_ARGS) --output $(1)) |
| $(if $(filter true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)),\ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(BOOT_SIGNER) /boot $(1) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1),\ |
| $(BOOT_SIGNER) /recovery $(1) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1)\ |
| )\ |
| ) |
| $(if $(filter true,$(PRODUCT_SUPPORTS_VBOOT)), \ |
| $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1)) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(call get-bootimage-partition-size,$(1),boot))), \ |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)))) |
| $(if $(filter true,$(BOARD_AVB_ENABLE)), \ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(AVBTOOL) add_hash_footer --image $(1) $(call get-partition-size-argument,$(call get-bootimage-partition-size,$(1),boot)) --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS),\ |
| $(AVBTOOL) add_hash_footer --image $(1) $(call get-partition-size-argument,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)) --partition_name recovery $(INTERNAL_AVB_RECOVERY_SIGNING_ARGS) $(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS))) |
| endef |
| |
| recoveryimage-deps := $(MKBOOTIMG) $(recovery_ramdisk) $(recovery_kernel) |
| ifeq (true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)) |
| recoveryimage-deps += $(BOOT_SIGNER) |
| endif |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| recoveryimage-deps += $(VBOOT_SIGNER) |
| endif |
| ifeq (true,$(BOARD_AVB_ENABLE)) |
| recoveryimage-deps += $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| recoveryimage-deps += $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| recoveryimage-deps += $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| recoveryimage-deps += $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| recoveryimage-deps += $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET), $(eval $(call add-dependency,$(b),$(call bootimage-to-kernel,$(b))))) |
| $(INSTALLED_BOOTIMAGE_TARGET): $(recoveryimage-deps) |
| $(call pretty,"Target boot image from recovery: $@") |
| $(call build-recoveryimage-target, $@, $(PRODUCT_OUT)/$(subst .img,,$(subst boot,kernel,$(notdir $@)))) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(recoveryimage-deps) |
| $(call build-recoveryimage-target, $@, \ |
| $(if $(filter true, $(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)),, $(recovery_kernel))) |
| |
| ifdef RECOVERY_RESOURCE_ZIP |
| $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrjX $@ -@ |
| $(remove-timestamps-from-package) |
| endif |
| |
| .PHONY: recoveryimage-nodeps |
| recoveryimage-nodeps: |
| @echo "make $@: ignoring dependencies" |
| $(call build-recoveryimage-target, $(INSTALLED_RECOVERYIMAGE_TARGET), \ |
| $(if $(filter true, $(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)),, $(recovery_kernel))) |
| |
| else # BUILDING_RECOVERY_IMAGE |
| RECOVERY_RESOURCE_ZIP := |
| endif # BUILDING_RECOVERY_IMAGE |
| |
| .PHONY: recoveryimage |
| recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP) |
| |
| ifneq ($(BOARD_NAND_PAGE_SIZE),) |
| $(error MTD device is no longer supported and thus BOARD_NAND_PAGE_SIZE is deprecated.) |
| endif |
| |
| ifneq ($(BOARD_NAND_SPARE_SIZE),) |
| $(error MTD device is no longer supported and thus BOARD_NAND_SPARE_SIZE is deprecated.) |
| endif |
| |
| |
| # ----------------------------------------------------------------- |
| # Build debug ramdisk and debug boot image. |
| ifneq ($(BUILDING_DEBUG_BOOT_IMAGE)$(BUILDING_DEBUG_VENDOR_BOOT_IMAGE),) |
| |
| INTERNAL_DEBUG_RAMDISK_FILES := $(filter $(TARGET_DEBUG_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Directories to be picked into the debug ramdisk. |
| # As these directories are all merged into one single cpio archive, the order |
| # matters. If there are multiple files with the same pathname, then the last one |
| # wins. |
| # |
| # ramdisk-debug.img will merge the content from either ramdisk.img or |
| # ramdisk-recovery.img, depending on whether BOARD_USES_RECOVERY_AS_BOOT |
| # is set or not. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INTERNAL_DEBUG_RAMDISK_SRC_DIRS := $(TARGET_RECOVERY_ROOT_OUT) |
| INTERNAL_DEBUG_RAMDISK_SRC_RAMDISK_TARGET := $(recovery_ramdisk) |
| else # BOARD_USES_RECOVERY_AS_BOOT == true |
| INTERNAL_DEBUG_RAMDISK_SRC_DIRS := $(TARGET_RAMDISK_OUT) |
| INTERNAL_DEBUG_RAMDISK_SRC_RAMDISK_TARGET := $(INSTALLED_RAMDISK_TARGET) |
| endif # BOARD_USES_RECOVERY_AS_BOOT != true |
| |
| INTERNAL_DEBUG_RAMDISK_SRC_DIRS += $(TARGET_DEBUG_RAMDISK_OUT) |
| INTERNAL_DEBUG_RAMDISK_SRC_DEPS := $(INTERNAL_DEBUG_RAMDISK_SRC_RAMDISK_TARGET) $(INTERNAL_DEBUG_RAMDISK_FILES) |
| |
| # INSTALLED_FILES_FILE_DEBUG_RAMDISK would ensure TARGET_DEBUG_RAMDISK_OUT is created. |
| INSTALLED_FILES_FILE_DEBUG_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk-debug.txt |
| INSTALLED_FILES_JSON_DEBUG_RAMDISK := $(INSTALLED_FILES_FILE_DEBUG_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_DEBUG_RAMDISK) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): $(INTERNAL_DEBUG_RAMDISK_SRC_DEPS) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): $(FILESLIST) $(FILESLIST_UTIL) |
| @echo "Installed file list: $@" |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) $(TARGET_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_DEBUG_RAMDISK_OUT)/force_debuggable |
| $(FILESLIST) $(INTERNAL_DEBUG_RAMDISK_SRC_DIRS) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| ifdef BUILDING_DEBUG_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the debug ramdisk, which is the original ramdisk plus additional |
| # files: force_debuggable, adb_debug.prop and userdebug sepolicy. |
| # When /force_debuggable is present, /init will load userdebug sepolicy |
| # and property files to allow adb root, if the device is unlocked. |
| INSTALLED_DEBUG_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk-debug.img |
| |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| @echo "Target debug ramdisk: $@" |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(INTERNAL_DEBUG_RAMDISK_SRC_DIRS) | $(COMPRESSION_COMMAND) > $@ |
| |
| .PHONY: ramdisk_debug-nodeps |
| ramdisk_debug-nodeps: $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(hide) rm -f $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(hide) mkdir -p $(dir $(INSTALLED_DEBUG_RAMDISK_TARGET)) $(INTERNAL_DEBUG_RAMDISK_SRC_DIRS) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(INTERNAL_DEBUG_RAMDISK_SRC_DIRS) | $(COMPRESSION_COMMAND) > $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| |
| # ----------------------------------------------------------------- |
| # the boot-debug.img, which is the kernel plus ramdisk-debug.img |
| # |
| # Note: it's intentional to skip signing for boot-debug.img, because it |
| # can only be used if the device is unlocked with verification error. |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_DEBUG_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot-debug,$(BOARD_KERNEL_BINARIES)), \ |
| $(PRODUCT_OUT)/$(k).img) |
| else |
| INSTALLED_DEBUG_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot-debug.img |
| endif |
| |
| # Replace ramdisk.img in $(MKBOOTIMG) ARGS with ramdisk-debug.img to build boot-debug.img |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INTERNAL_DEBUG_BOOTIMAGE_ARGS := $(subst $(INTERNAL_DEBUG_RAMDISK_SRC_RAMDISK_TARGET),$(INSTALLED_DEBUG_RAMDISK_TARGET),$(INTERNAL_RECOVERYIMAGE_ARGS)) |
| else |
| INTERNAL_DEBUG_BOOTIMAGE_ARGS := $(subst $(INTERNAL_DEBUG_RAMDISK_SRC_RAMDISK_TARGET),$(INSTALLED_DEBUG_RAMDISK_TARGET),$(INTERNAL_BOOTIMAGE_ARGS)) |
| endif |
| |
| # If boot.img is chained but boot-debug.img is not signed, libavb in bootloader |
| # will fail to find valid AVB metadata from the end of /boot, thus stop booting. |
| # Using a test key to sign boot-debug.img to continue booting with the mismatched |
| # public key, if the device is unlocked. |
| ifneq ($(BOARD_AVB_BOOT_KEY_PATH),) |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| endif |
| |
| BOARD_AVB_BOOT_TEST_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem |
| INTERNAL_AVB_BOOT_TEST_SIGNING_ARGS := --algorithm SHA256_RSA2048 --key $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| # $(1): the bootimage to sign |
| # $(2): boot image variant (boot, boot-debug, boot-test-harness) |
| define test-key-sign-bootimage |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(call get-bootimage-partition-size,$(1),$(2)))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| $(call get-partition-size-argument,$(call get-bootimage-partition-size,$(1),$(2)))\ |
| --partition_name boot $(INTERNAL_AVB_BOOT_TEST_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),$(2))) |
| endef |
| |
| # $(1): output file |
| define build-debug-bootimage-target |
| $(MKBOOTIMG) --kernel $(PRODUCT_OUT)/$(subst .img,,$(subst boot-debug,kernel,$(notdir $(1)))) \ |
| $(INTERNAL_DEBUG_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) \ |
| $(BOARD_MKBOOTIMG_ARGS) --output $1 |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$1,boot-debug)) |
| endef |
| |
| # Depends on original boot.img and ramdisk-debug.img, to build the new boot-debug.img |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_BOOTIMAGE_TARGET) $(AVBTOOL) |
| $(call pretty,"Target boot debug image: $@") |
| $(call build-debug-bootimage-target, $@) |
| |
| .PHONY: bootimage_debug-nodeps |
| bootimage_debug-nodeps: $(MKBOOTIMG) $(AVBTOOL) |
| echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_DEBUG_BOOTIMAGE_TARGET),$(call build-debug-bootimage-target,$b)) |
| |
| endif # BUILDING_DEBUG_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # vendor debug ramdisk |
| # Combines vendor ramdisk files and debug ramdisk files to build the vendor debug ramdisk. |
| ifdef BUILDING_DEBUG_VENDOR_BOOT_IMAGE |
| |
| INTERNAL_VENDOR_DEBUG_RAMDISK_FILES := $(filter $(TARGET_VENDOR_DEBUG_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # The debug vendor ramdisk combines vendor ramdisk and debug ramdisk. |
| INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DIRS := $(TARGET_VENDOR_RAMDISK_OUT) |
| INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DEPS := $(INTERNAL_VENDOR_RAMDISK_TARGET) |
| |
| # Exclude recovery files in the default vendor ramdisk if including a standalone |
| # recovery ramdisk in vendor_boot. |
| ifeq (true,$(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT)) |
| ifneq (true,$(BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT)) |
| INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DIRS += $(TARGET_RECOVERY_ROOT_OUT) |
| INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DEPS += $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| endif # BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT != true |
| endif # BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT == true |
| |
| INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DIRS += $(TARGET_VENDOR_DEBUG_RAMDISK_OUT) $(TARGET_DEBUG_RAMDISK_OUT) |
| INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DEPS += $(INTERNAL_VENDOR_DEBUG_RAMDISK_FILES) $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) |
| |
| # INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK would ensure TARGET_VENDOR_DEBUG_RAMDISK_OUT is created. |
| INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK := $(PRODUCT_OUT)/installed-files-vendor-ramdisk-debug.txt |
| INSTALLED_FILES_JSON_VENDOR_DEBUG_RAMDISK := $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_DEBUG_RAMDISK) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): $(INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DEPS) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): $(FILESLIST) $(FILESLIST_UTIL) |
| @echo "Installed file list: $@" |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) $(TARGET_VENDOR_DEBUG_RAMDISK_OUT) |
| $(FILESLIST) $(INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DIRS) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| INTERNAL_VENDOR_DEBUG_RAMDISK_TARGET := $(call intermediates-dir-for,PACKAGING,vendor_boot-debug)/vendor_ramdisk-debug.cpio$(RAMDISK_EXT) |
| |
| $(INTERNAL_VENDOR_DEBUG_RAMDISK_TARGET): $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK) |
| $(INTERNAL_VENDOR_DEBUG_RAMDISK_TARGET): $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DIRS) | $(COMPRESSION_COMMAND) > $@ |
| |
| INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET := $(PRODUCT_OUT)/vendor_ramdisk-debug.img |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): $(INTERNAL_VENDOR_DEBUG_RAMDISK_TARGET) |
| @echo "Target debug vendor ramdisk: $@" |
| $(copy-file-to-target) |
| |
| # ----------------------------------------------------------------- |
| # vendor_boot-debug.img. |
| INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot-debug.img |
| |
| # The util to sign vendor_boot-debug.img with a test key. |
| BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem |
| INTERNAL_AVB_VENDOR_BOOT_TEST_SIGNING_ARGS := --algorithm SHA256_RSA2048 --key $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| # $(1): the vendor bootimage to sign |
| define test-key-sign-vendor-bootimage |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| $(call get-partition-size-argument,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) \ |
| --partition_name vendor_boot $(INTERNAL_AVB_VENDOR_BOOT_TEST_SIGNING_ARGS) \ |
| $(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS) |
| $(call assert-max-image-size,$(1),$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| ifneq ($(BOARD_AVB_VENDOR_BOOT_KEY_PATH),) |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # Depends on vendor_boot.img and vendor-ramdisk-debug.cpio.gz to build the new vendor_boot-debug.img |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) $(INTERNAL_VENDOR_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS) |
| $(call pretty,"Target vendor_boot debug image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_DEBUG_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(if $(BOARD_AVB_VENDOR_BOOT_KEY_PATH),$(call test-key-sign-vendor-bootimage,$@)) |
| |
| endif # BUILDING_DEBUG_VENDOR_BOOT_IMAGE |
| |
| # Appends a few test harness specific properties into the adb_debug.prop. |
| ADDITIONAL_TEST_HARNESS_PROPERTIES := ro.audio.silent=1 |
| ADDITIONAL_TEST_HARNESS_PROPERTIES += ro.test_harness=1 |
| |
| INTERNAL_DEBUG_RAMDISK_ADB_DEBUG_PROP_TARGET := $(strip $(filter $(TARGET_DEBUG_RAMDISK_OUT)/adb_debug.prop,$(INTERNAL_DEBUG_RAMDISK_FILES))) |
| INTERNAL_TEST_HARNESS_RAMDISK_ADB_DEBUG_PROP_TARGET := $(TARGET_TEST_HARNESS_RAMDISK_OUT)/adb_debug.prop |
| $(INTERNAL_TEST_HARNESS_RAMDISK_ADB_DEBUG_PROP_TARGET): $(INTERNAL_DEBUG_RAMDISK_ADB_DEBUG_PROP_TARGET) |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| ifdef INTERNAL_DEBUG_RAMDISK_ADB_DEBUG_PROP_TARGET |
| $(hide) cp $(INTERNAL_DEBUG_RAMDISK_ADB_DEBUG_PROP_TARGET) $@ |
| endif |
| $(hide) echo "" >> $@ |
| $(hide) echo "#" >> $@ |
| $(hide) echo "# ADDITIONAL TEST HARNESS PROPERTIES" >> $@ |
| $(hide) echo "#" >> $@ |
| $(hide) $(foreach line,$(ADDITIONAL_TEST_HARNESS_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| |
| INTERNAL_TEST_HARNESS_RAMDISK_FILES := $(filter $(TARGET_TEST_HARNESS_RAMDISK_OUT)/%, \ |
| $(INTERNAL_TEST_HARNESS_RAMDISK_ADB_DEBUG_PROP_TARGET) \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # The order is important here. The test harness ramdisk staging directory has to |
| # come last so that it can override the adb_debug.prop in the debug ramdisk |
| # staging directory. |
| INTERNAL_TEST_HARNESS_RAMDISK_SRC_DIRS := $(INTERNAL_DEBUG_RAMDISK_SRC_DIRS) $(TARGET_TEST_HARNESS_RAMDISK_OUT) |
| INTERNAL_TEST_HARNESS_RAMDISK_SRC_DEPS := $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) $(INTERNAL_TEST_HARNESS_RAMDISK_FILES) |
| |
| ifdef BUILDING_DEBUG_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # The test harness ramdisk, which is based off debug_ramdisk, plus a |
| # few additional test-harness-specific properties in adb_debug.prop. |
| INSTALLED_TEST_HARNESS_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk-test-harness.img |
| |
| $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET): $(INTERNAL_TEST_HARNESS_RAMDISK_SRC_DEPS) |
| $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET): $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| @echo "Target test harness ramdisk: $@" |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(INTERNAL_TEST_HARNESS_RAMDISK_SRC_DIRS) | $(COMPRESSION_COMMAND) > $@ |
| |
| .PHONY: ramdisk_test_harness-nodeps |
| ramdisk_test_harness-nodeps: $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(hide) rm -f $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| $(hide) mkdir -p $(dir $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET)) $(INTERNAL_TEST_HARNESS_RAMDISK_SRC_DIRS) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(INTERNAL_TEST_HARNESS_RAMDISK_SRC_DIRS) | $(COMPRESSION_COMMAND) > $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| |
| # ----------------------------------------------------------------- |
| # the boot-test-harness.img, which is the kernel plus ramdisk-test-harness.img |
| # |
| # Note: it's intentional to skip signing for boot-test-harness.img, because it |
| # can only be used if the device is unlocked with verification error. |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot-test-harness,$(BOARD_KERNEL_BINARIES)), \ |
| $(PRODUCT_OUT)/$(k).img) |
| else |
| INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot-test-harness.img |
| endif |
| |
| # Replace ramdisk-debug.img in $(MKBOOTIMG) ARGS with ramdisk-test-harness.img to build boot-test-harness.img |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS := $(subst $(INSTALLED_DEBUG_RAMDISK_TARGET),$(INSTALLED_TEST_HARNESS_RAMDISK_TARGET),$(INTERNAL_DEBUG_BOOTIMAGE_ARGS)) |
| |
| # If boot.img is chained but boot-test-harness.img is not signed, libavb in bootloader |
| # will fail to find valid AVB metadata from the end of /boot, thus stop booting. |
| # Using a test key to sign boot-test-harness.img to continue booting with the mismatched |
| # public key, if the device is unlocked. |
| ifneq ($(BOARD_AVB_BOOT_KEY_PATH),) |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # $(1): output file |
| define build-boot-test-harness-target |
| $(MKBOOTIMG) --kernel $(PRODUCT_OUT)/$(subst .img,,$(subst boot-test-harness,kernel,$(notdir $(1)))) \ |
| $(INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) \ |
| $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$@,boot-test-harness)) |
| endef |
| |
| # Build the new boot-test-harness.img, based on boot-debug.img and ramdisk-test-harness.img. |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_DEBUG_BOOTIMAGE_TARGET) $(AVBTOOL) |
| $(call pretty,"Target boot test harness image: $@") |
| $(call build-boot-test-harness-target,$@) |
| |
| .PHONY: bootimage_test_harness-nodeps |
| bootimage_test_harness-nodeps: $(MKBOOTIMG) $(AVBTOOL) |
| echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET),$(call build-boot-test-harness-target,$b)) |
| |
| endif # BUILDING_DEBUG_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # vendor test harness ramdisk, which is a vendor ramdisk combined with |
| # a test harness ramdisk. |
| ifdef BUILDING_DEBUG_VENDOR_BOOT_IMAGE |
| |
| INTERNAL_VENDOR_TEST_HARNESS_RAMDISK_TARGET := $(call intermediates-dir-for,PACKAGING,vendor_boot-test-harness)/vendor_ramdisk-test-harness.cpio$(RAMDISK_EXT) |
| |
| # The order is important here. The test harness ramdisk staging directory has to |
| # come last so that it can override the adb_debug.prop in the debug ramdisk |
| # staging directory. |
| INTERNAL_TEST_HARNESS_VENDOR_RAMDISK_SRC_DIRS := $(INTERNAL_DEBUG_VENDOR_RAMDISK_SRC_DIRS) $(TARGET_TEST_HARNESS_RAMDISK_OUT) |
| INTERNAL_TEST_HARNESS_VENDOR_RAMDISK_SRC_DEPS := $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK) $(INTERNAL_TEST_HARNESS_RAMDISK_FILES) |
| |
| $(INTERNAL_VENDOR_TEST_HARNESS_RAMDISK_TARGET): $(INTERNAL_TEST_HARNESS_VENDOR_RAMDISK_SRC_DEPS) |
| $(INTERNAL_VENDOR_TEST_HARNESS_RAMDISK_TARGET): $(MKBOOTFS) | $(COMPRESSION_COMMAND_DEPS) |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(INTERNAL_TEST_HARNESS_VENDOR_RAMDISK_SRC_DIRS) | $(COMPRESSION_COMMAND) > $@ |
| |
| INSTALLED_VENDOR_TEST_HARNESS_RAMDISK_TARGET := $(PRODUCT_OUT)/vendor_ramdisk-test-harness.img |
| $(INSTALLED_VENDOR_TEST_HARNESS_RAMDISK_TARGET): $(INTERNAL_VENDOR_TEST_HARNESS_RAMDISK_TARGET) |
| @echo "Target test harness vendor ramdisk: $@" |
| $(copy-file-to-target) |
| |
| # ----------------------------------------------------------------- |
| # vendor_boot-test-harness.img. |
| INSTALLED_VENDOR_TEST_HARNESS_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot-test-harness.img |
| |
| ifneq ($(BOARD_AVB_VENDOR_BOOT_KEY_PATH),) |
| $(INSTALLED_VENDOR_TEST_HARNESS_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # Depends on vendor_boot.img and vendor_ramdisk-test-harness.cpio$(RAMDISK_EXT) to build the new vendor_boot-test-harness.img |
| $(INSTALLED_VENDOR_TEST_HARNESS_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) |
| $(INSTALLED_VENDOR_TEST_HARNESS_BOOTIMAGE_TARGET): $(INTERNAL_VENDOR_TEST_HARNESS_RAMDISK_TARGET) |
| $(INSTALLED_VENDOR_TEST_HARNESS_BOOTIMAGE_TARGET): $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS) |
| $(call pretty,"Target vendor_boot test harness image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_TEST_HARNESS_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_ARGS) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(if $(BOARD_AVB_VENDOR_BOOT_KEY_PATH),$(call test-key-sign-vendor-bootimage,$@)) |
| |
| endif # BUILDING_DEBUG_VENDOR_BOOT_IMAGE |
| |
| endif # BUILDING_DEBUG_BOOT_IMAGE || BUILDING_DEBUG_VENDOR_BOOT_IMAGE |
| |
| |
| # Creates a compatibility symlink between two partitions, e.g. /system/vendor to /vendor |
| # $1: from location (e.g $(TARGET_OUT)/vendor) |
| # $2: destination location (e.g. /vendor) |
| # $3: partition image name (e.g. vendor.img) |
| define create-partition-compat-symlink |
| $(eval \ |
| $1: |
| @echo Symlink $(patsubst $(PRODUCT_OUT)/%,%,$1) to $2 |
| mkdir -p $(dir $1) |
| if [ -d $1 ] && [ ! -h $1 ]; then \ |
| echo 'Non-symlink $1 detected!' 1>&2; \ |
| echo 'You cannot install files to $1 while building a separate $3!' 1>&2; \ |
| exit 1; \ |
| fi |
| ln -sfn $2 $1 |
| $1: .KATI_SYMLINK_OUTPUTS := $1 |
| ) |
| $1 |
| endef |
| |
| |
| # ----------------------------------------------------------------- |
| # system image |
| |
| # FSVerity metadata generation |
| # Generate fsverity metadata files (.fsv_meta) and build manifest |
| # (system/etc/security/fsverity/BuildManifest.apk) BEFORE filtering systemimage files below |
| ifeq ($(PRODUCT_SYSTEM_FSVERITY_GENERATE_METADATA),true) |
| |
| # Generate fsv_meta |
| fsverity-metadata-targets := $(sort $(filter \ |
| $(TARGET_OUT)/framework/% \ |
| $(TARGET_OUT)/etc/boot-image.prof \ |
| $(TARGET_OUT)/etc/dirty-image-objects \ |
| $(TARGET_OUT)/etc/classpaths/%.pb, \ |
| $(ALL_GENERATED_SOURCES) $(ALL_DEFAULT_INSTALLED_MODULES))) |
| |
| define fsverity-generate-metadata |
| $(1).fsv_meta: PRIVATE_SRC := $(1) |
| $(1).fsv_meta: PRIVATE_FSVERITY := $(HOST_OUT_EXECUTABLES)/fsverity |
| $(1).fsv_meta: $(HOST_OUT_EXECUTABLES)/fsverity_metadata_generator $(HOST_OUT_EXECUTABLES)/fsverity $(1) |
| $$< --fsverity-path $$(PRIVATE_FSVERITY) --signature none \ |
| --hash-alg sha256 --output $$@ $$(PRIVATE_SRC) |
| endef |
| |
| $(foreach f,$(fsverity-metadata-targets),$(eval $(call fsverity-generate-metadata,$(f)))) |
| ALL_DEFAULT_INSTALLED_MODULES += $(addsuffix .fsv_meta,$(fsverity-metadata-targets)) |
| |
| # Generate BuildManifest.apk |
| FSVERITY_APK_KEY_PATH := $(DEFAULT_SYSTEM_DEV_CERTIFICATE) |
| FSVERITY_APK_OUT := $(TARGET_OUT)/etc/security/fsverity/BuildManifest.apk |
| FSVERITY_APK_MANIFEST_PATH := system/security/fsverity/AndroidManifest.xml |
| $(FSVERITY_APK_OUT): PRIVATE_FSVERITY := $(HOST_OUT_EXECUTABLES)/fsverity |
| $(FSVERITY_APK_OUT): PRIVATE_AAPT2 := $(HOST_OUT_EXECUTABLES)/aapt2 |
| $(FSVERITY_APK_OUT): PRIVATE_MIN_SDK_VERSION := $(DEFAULT_APP_TARGET_SDK) |
| $(FSVERITY_APK_OUT): PRIVATE_VERSION_CODE := $(PLATFORM_SDK_VERSION) |
| $(FSVERITY_APK_OUT): PRIVATE_VERSION_NAME := $(APPS_DEFAULT_VERSION_NAME) |
| $(FSVERITY_APK_OUT): PRIVATE_APKSIGNER := $(HOST_OUT_EXECUTABLES)/apksigner |
| $(FSVERITY_APK_OUT): PRIVATE_MANIFEST := $(FSVERITY_APK_MANIFEST_PATH) |
| $(FSVERITY_APK_OUT): PRIVATE_FRAMEWORK_RES := $(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk |
| $(FSVERITY_APK_OUT): PRIVATE_KEY := $(FSVERITY_APK_KEY_PATH) |
| $(FSVERITY_APK_OUT): PRIVATE_INPUTS := $(fsverity-metadata-targets) |
| $(FSVERITY_APK_OUT): $(HOST_OUT_EXECUTABLES)/fsverity_manifest_generator \ |
| $(HOST_OUT_EXECUTABLES)/fsverity $(HOST_OUT_EXECUTABLES)/aapt2 \ |
| $(HOST_OUT_EXECUTABLES)/apksigner $(FSVERITY_APK_MANIFEST_PATH) \ |
| $(FSVERITY_APK_KEY_PATH).x509.pem $(FSVERITY_APK_KEY_PATH).pk8 \ |
| $(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk \ |
| $(fsverity-metadata-targets) |
| $< --fsverity-path $(PRIVATE_FSVERITY) --aapt2-path $(PRIVATE_AAPT2) \ |
| --min-sdk-version $(PRIVATE_MIN_SDK_VERSION) \ |
| --version-code $(PRIVATE_VERSION_CODE) \ |
| --version-name $(PRIVATE_VERSION_NAME) \ |
| --apksigner-path $(PRIVATE_APKSIGNER) --apk-key-path $(PRIVATE_KEY) \ |
| --apk-manifest-path $(PRIVATE_MANIFEST) --framework-res $(PRIVATE_FRAMEWORK_RES) \ |
| --output $@ \ |
| --base-dir $(PRODUCT_OUT) $(PRIVATE_INPUTS) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(FSVERITY_APK_OUT) |
| |
| endif # PRODUCT_SYSTEM_FSVERITY_GENERATE_METADATA |
| |
| INTERNAL_SYSTEMIMAGE_FILES := $(sort $(filter $(TARGET_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES))) |
| |
| # Create symlink /system/vendor to /vendor if necessary. |
| ifdef BOARD_USES_VENDORIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/vendor,/vendor,vendor.img) |
| endif |
| |
| # Create symlink /system/product to /product if necessary. |
| ifdef BOARD_USES_PRODUCTIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/product,/product,product.img) |
| endif |
| |
| # Create symlink /system/system_ext to /system_ext if necessary. |
| ifdef BOARD_USES_SYSTEM_EXTIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/system_ext,/system_ext,system_ext.img) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system_dlkm partition image |
| |
| # Create symlinks for system_dlkm on devices with a system_dlkm partition: |
| # /system/lib/modules -> /system_dlkm/lib/modules |
| # |
| # On devices with a system_dlkm partition, |
| # - /system/lib/modules is a symlink to a directory that stores system DLKMs. |
| # - The system_dlkm partition is mounted at /system_dlkm at runtime. |
| ifdef BOARD_USES_SYSTEM_DLKMIMAGE |
| INTERNAL_SYSTEMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT)/lib/modules,/system_dlkm/lib/modules,system_dlkm.img) |
| endif |
| |
| FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS) |
| |
| # ASAN libraries in the system image - add dependency. |
| ASAN_IN_SYSTEM_INSTALLED := $(TARGET_OUT)/asan.tar.bz2 |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| ifeq (true,$(SANITIZE_TARGET_SYSTEM)) |
| FULL_SYSTEMIMAGE_DEPS += $(ASAN_IN_SYSTEM_INSTALLED) |
| endif |
| endif |
| |
| FULL_SYSTEMIMAGE_DEPS += $(INTERNAL_ROOT_FILES) $(INSTALLED_FILES_FILE_ROOT) |
| |
| # ----------------------------------------------------------------- |
| ifdef BUILDING_SYSTEM_IMAGE |
| |
| # Install system linker configuration |
| # Collect all available stub libraries installed in system and install with predefined linker configuration |
| SYSTEM_LINKER_CONFIG := $(TARGET_OUT)/etc/linker.config.pb |
| $(SYSTEM_LINKER_CONFIG) : $(INTERNAL_SYSTEMIMAGE_FILES) $(LINKER_CONFIG_PATH_system_linker_config) | conv_linker_config |
| $(HOST_OUT_EXECUTABLES)/conv_linker_config systemprovide --source $(LINKER_CONFIG_PATH_system_linker_config)\ |
| --output $@ --value "$(STUB_LIBRARIES)" --system "$(TARGET_OUT)" |
| |
| FULL_SYSTEMIMAGE_DEPS += $(SYSTEM_LINKER_CONFIG) |
| |
| # installed file list |
| # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on. |
| # We put installed-files.txt ahead of image itself in the dependency graph |
| # so that we can get the size stat even if the build fails due to too large |
| # system image. |
| INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt |
| INSTALLED_FILES_JSON := $(INSTALLED_FILES_FILE:.txt=.json) |
| $(INSTALLED_FILES_FILE): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON) |
| $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| .PHONY: installed-file-list |
| installed-file-list: $(INSTALLED_FILES_FILE) |
| |
| ifeq ($(HOST_OS),linux) |
| $(call dist-for-goals, sdk sdk_addon, $(INSTALLED_FILES_FILE)) |
| endif |
| |
| systemimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,systemimage) |
| BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img |
| |
| # $(1): output file |
| define build-systemimage-target |
| @echo "Target system fs image: $(1)" |
| @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt |
| $(call generate-image-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt,system, \ |
| skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \ |
| || ( mkdir -p $${DIST_DIR}; \ |
| cp $(INSTALLED_FILES_FILE) $${DIST_DIR}/installed-files-rescued.txt; \ |
| exit 1 ) |
| endef |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(BUILT_SYSTEMIMAGE): $(BOARD_AVB_SYSTEM_KEY_PATH) |
| endif |
| $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) |
| $(call build-systemimage-target,$@) |
| |
| $(call declare-1p-container,$(BUILT_SYSTEMIMAGE),system/extras) |
| $(call declare-container-license-deps,$(BUILT_SYSTEMIMAGE),$(FULL_SYSTEMIMAGE_DEPS),$(PRODUCT_OUT)/:) |
| |
| INSTALLED_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/system.img |
| SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT) |
| |
| # INSTALLED_SYSTEMIMAGE_TARGET used to be named INSTALLED_SYSTEMIMAGE. Create an alias for backward |
| # compatibility, in case device-specific Makefiles still refer to the old name. |
| INSTALLED_SYSTEMIMAGE := $(INSTALLED_SYSTEMIMAGE_TARGET) |
| |
| # The system partition needs room for the recovery image as well. We |
| # now store the recovery image as a binary patch using the boot image |
| # as the source (since they are very similar). Generate the patch so |
| # we can see how big it's going to be, and include that in the system |
| # image size check calculation. |
| ifneq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| ifneq (,$(filter true, $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO))) |
| diff_tool := $(HOST_OUT_EXECUTABLES)/bsdiff |
| else |
| diff_tool := $(HOST_OUT_EXECUTABLES)/imgdiff |
| endif |
| intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch) |
| RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p |
| $(RECOVERY_FROM_BOOT_PATCH): PRIVATE_DIFF_TOOL := $(diff_tool) |
| $(RECOVERY_FROM_BOOT_PATCH): \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(firstword $(INSTALLED_BOOTIMAGE_TARGET)) \ |
| $(diff_tool) |
| @echo "Construct recovery from boot" |
| mkdir -p $(dir $@) |
| $(PRIVATE_DIFF_TOOL) $(firstword $(INSTALLED_BOOTIMAGE_TARGET)) $(INSTALLED_RECOVERYIMAGE_TARGET) $@ |
| else # $(BOARD_USES_FULL_RECOVERY_IMAGE) == true |
| RECOVERY_FROM_BOOT_PATCH := $(INSTALLED_RECOVERYIMAGE_TARGET) |
| endif # BOARD_USES_FULL_RECOVERY_IMAGE |
| endif # INSTALLED_RECOVERYIMAGE_TARGET |
| endif # INSTALLED_BOOTIMAGE_TARGET |
| |
| $(INSTALLED_SYSTEMIMAGE_TARGET): $(BUILT_SYSTEMIMAGE) |
| @echo "Install system fs image: $@" |
| $(copy-file-to-target) |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| |
| $(call declare-1p-container,$(INSTALLED_SYSTEMIMAGE_TARGET),) |
| $(call declare-container-license-deps,$(INSTALLED_SYSTEMIMAGE_TARGET),$(BUILT_SYSTEMIMAGE),$(BUILT_SYSTEMIMAGE):/) |
| |
| systemimage: $(INSTALLED_SYSTEMIMAGE_TARGET) |
| |
| .PHONY: systemlicense |
| systemlicense: $(call license-metadata-dir)/$(INSTALLED_SYSTEMIMAGE_TARGET).meta_lic reportmissinglicenses |
| |
| .PHONY: systemimage-nodeps snod |
| systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \ |
| | $(INTERNAL_USERIMAGES_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE_TARGET)) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| ifeq (true,$(WITH_DEXPREOPT)) |
| $(warning Warning: with dexpreopt enabled, you may need a full rebuild.) |
| endif |
| |
| endif # BUILDING_SYSTEM_IMAGE |
| |
| .PHONY: sync syncsys |
| sync syncsys: $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| # ----------------------------------------------------------------- |
| # Old PDK fusion targets |
| .PHONY: platform |
| platform: |
| echo "Warning: 'platform' is obsolete" |
| |
| .PHONY: platform-java |
| platform-java: |
| echo "Warning: 'platform-java' is obsolete" |
| |
| # ----------------------------------------------------------------- |
| # data partition image |
| INTERNAL_USERDATAIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| ifdef BUILDING_USERDATA_IMAGE |
| userdataimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,userdata) |
| BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img |
| |
| define build-userdataimage-target |
| $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_DATA) |
| @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt |
| $(call generate-image-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt,userdata,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET) |
| INSTALLED_USERDATAIMAGE_TARGET_DEPS := \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) |
| $(INSTALLED_USERDATAIMAGE_TARGET): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| $(build-userdataimage-target) |
| |
| .PHONY: userdataimage-nodeps |
| userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-userdataimage-target) |
| |
| endif # BUILDING_USERDATA_IMAGE |
| |
| # ASAN libraries in the system image - build rule. |
| ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL := $(sort $(patsubst $(PRODUCT_OUT)/%,%,\ |
| $(TARGET_OUT_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_SHARED_LIBRARIES) \ |
| $(TARGET_OUT_VENDOR_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_VENDOR_SHARED_LIBRARIES))) |
| # Extra options: Enforce the system user for the files to avoid having to change ownership. |
| ASAN_SYSTEM_INSTALL_OPTIONS := --owner=1000 --group=1000 |
| # Note: experimentally, it seems not worth it to try to get "best" compression. We don't save |
| # enough space. |
| $(ASAN_IN_SYSTEM_INSTALLED): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| tar cfj $(ASAN_IN_SYSTEM_INSTALLED) $(ASAN_SYSTEM_INSTALL_OPTIONS) -C $(TARGET_OUT_DATA)/.. $(ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL) >/dev/null |
| |
| # ----------------------------------------------------------------- |
| # partition table image |
| ifdef BOARD_BPT_INPUT_FILES |
| |
| BUILT_BPTIMAGE_TARGET := $(PRODUCT_OUT)/partition-table.img |
| BUILT_BPTJSON_TARGET := $(PRODUCT_OUT)/partition-table.bpt |
| |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS := \ |
| --output_gpt $(BUILT_BPTIMAGE_TARGET) \ |
| --output_json $(BUILT_BPTJSON_TARGET) \ |
| $(foreach file, $(BOARD_BPT_INPUT_FILES), --input $(file)) |
| |
| ifdef BOARD_BPT_DISK_SIZE |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS += --disk_size $(BOARD_BPT_DISK_SIZE) |
| endif |
| |
| define build-bptimage-target |
| $(call pretty,"Target partition table image: $(INSTALLED_BPTIMAGE_TARGET)") |
| $(hide) $(BPTTOOL) make_table $(INTERNAL_BVBTOOL_MAKE_TABLE_ARGS) $(BOARD_BPT_MAKE_TABLE_ARGS) |
| endef |
| |
| INSTALLED_BPTIMAGE_TARGET := $(BUILT_BPTIMAGE_TARGET) |
| $(BUILT_BPTJSON_TARGET): $(INSTALLED_BPTIMAGE_TARGET) |
| $(hide) touch -c $(BUILT_BPTJSON_TARGET) |
| |
| $(INSTALLED_BPTIMAGE_TARGET): $(BPTTOOL) $(BOARD_BPT_INPUT_FILES) |
| $(build-bptimage-target) |
| |
| .PHONY: bptimage-nodeps |
| bptimage-nodeps: |
| $(build-bptimage-target) |
| |
| endif # BOARD_BPT_INPUT_FILES |
| |
| # ----------------------------------------------------------------- |
| # cache partition image |
| ifdef BUILDING_CACHE_IMAGE |
| INTERNAL_CACHEIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| cacheimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,cache) |
| BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img |
| |
| define build-cacheimage-target |
| $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_CACHE) |
| @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt |
| $(call generate-image-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt,cache,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt \ |
| $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET) |
| $(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) |
| $(build-cacheimage-target) |
| |
| .PHONY: cacheimage-nodeps |
| cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-cacheimage-target) |
| |
| else # BUILDING_CACHE_IMAGE |
| # we need to ignore the broken cache link when doing the rsync |
| IGNORE_CACHE_LINK := --exclude=cache |
| endif # BUILDING_CACHE_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # system_other partition image |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true) |
| # Marker file to identify that odex files are installed |
| INSTALLED_SYSTEM_OTHER_ODEX_MARKER := $(TARGET_OUT_SYSTEM_OTHER)/system-other-odex-marker |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER) |
| $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER): |
| $(hide) touch $@ |
| endif |
| |
| INTERNAL_SYSTEMOTHERIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # system_other dex files are installed as a side-effect of installing system image files |
| INTERNAL_SYSTEMOTHERIMAGE_FILES += $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_SYSTEMOTHER := $(PRODUCT_OUT)/installed-files-system-other.txt |
| INSTALLED_FILES_JSON_SYSTEMOTHER := $(INSTALLED_FILES_FILE_SYSTEMOTHER:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEMOTHER) |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER) : $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_SYSTEM_OTHER) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # Determines partition size for system_other.img. |
| ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true) |
| ifneq ($(filter system,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),) |
| INTERNAL_SYSTEM_OTHER_PARTITION_SIZE := $(BOARD_SUPER_PARTITION_SYSTEM_DEVICE_SIZE) |
| endif |
| endif |
| |
| ifndef INTERNAL_SYSTEM_OTHER_PARTITION_SIZE |
| INTERNAL_SYSTEM_OTHER_PARTITION_SIZE:= $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) |
| endif |
| |
| systemotherimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_other) |
| BUILT_SYSTEMOTHERIMAGE_TARGET := $(PRODUCT_OUT)/system_other.img |
| |
| # Note that we assert the size is SYSTEMIMAGE_PARTITION_SIZE since this is the 'b' system image. |
| define build-systemotherimage-target |
| $(call pretty,"Target system_other fs image: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_OTHER) |
| @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt |
| $(call generate-image-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt,system,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt \ |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEMOTHERIMAGE_TARGET := $(BUILT_SYSTEMOTHERIMAGE_TARGET) |
| ifneq (true,$(SANITIZE_LITE)) |
| # Only create system_other when not building the second stage of a SANITIZE_LITE build. |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(INSTALLED_FILES_FILE_SYSTEMOTHER) |
| $(build-systemotherimage-target) |
| endif |
| |
| .PHONY: systemotherimage-nodeps |
| systemotherimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-systemotherimage-target) |
| |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| |
| # ----------------------------------------------------------------- |
| # vendor partition image |
| ifdef BUILDING_VENDOR_IMAGE |
| INTERNAL_VENDORIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| |
| # Create symlink /vendor/odm to /odm if necessary. |
| ifdef BOARD_USES_ODMIMAGE |
| INTERNAL_VENDORIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT_VENDOR)/odm,/odm,odm.img) |
| endif |
| |
| # Create symlinks for vendor_dlkm on devices with a vendor_dlkm partition: |
| # /vendor/lib/modules -> /vendor_dlkm/lib/modules |
| # |
| # On devices with a vendor_dlkm partition, |
| # - /vendor/lib/modules is a symlink to a directory that stores vendor DLKMs. |
| # - /vendor_dlkm/{etc,...} store other vendor_dlkm files directly. The vendor_dlkm partition is |
| # mounted at /vendor_dlkm at runtime and the symlinks created in system/core/rootdir/Android.mk |
| # are hidden. |
| # On devices without a vendor_dlkm partition, |
| # - /vendor/lib/modules stores vendor DLKMs directly. |
| # - /vendor_dlkm/{etc,...} are symlinks to directories that store other vendor_dlkm files. |
| # See system/core/rootdir/Android.mk for a list of created symlinks. |
| # The vendor DLKMs and other vendor_dlkm files must not be accessed using other paths because they |
| # are not guaranteed to exist on all devices. |
| ifdef BOARD_USES_VENDOR_DLKMIMAGE |
| INTERNAL_VENDORIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT_VENDOR)/lib/modules,/vendor_dlkm/lib/modules,vendor_dlkm.img) |
| endif |
| |
| INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt |
| INSTALLED_FILES_JSON_VENDOR := $(INSTALLED_FILES_FILE_VENDOR:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR) |
| $(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_VENDOR) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| vendorimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor) |
| BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| define build-vendorimage-target |
| $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR) |
| @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt |
| $(call generate-image-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt,vendor,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt \ |
| $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET) $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_VENDORIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET) |
| $(INSTALLED_VENDORIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_VENDORIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_VENDOR) \ |
| $(RECOVERY_FROM_BOOT_PATCH) |
| $(build-vendorimage-target) |
| |
| .PHONY: vendorimage-nodeps vnod |
| vendorimage-nodeps vnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-vendorimage-target) |
| |
| sync: $(INTERNAL_VENDORIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_VENDORIMAGE |
| INSTALLED_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDORIMAGE),$(INSTALLED_VENDORIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # product partition image |
| ifdef BUILDING_PRODUCT_IMAGE |
| INTERNAL_PRODUCTIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_PRODUCT)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_PRODUCT := $(PRODUCT_OUT)/installed-files-product.txt |
| INSTALLED_FILES_JSON_PRODUCT := $(INSTALLED_FILES_FILE_PRODUCT:.txt=.json) |
| $(INSTALLED_FILES_FILE_PRODUCT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_PRODUCT) |
| $(INSTALLED_FILES_FILE_PRODUCT) : $(INTERNAL_PRODUCTIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_PRODUCT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| productimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,product) |
| BUILT_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img |
| define build-productimage-target |
| $(call pretty,"Target product fs image: $(INSTALLED_PRODUCTIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_PRODUCT) |
| @mkdir -p $(productimage_intermediates) && rm -rf $(productimage_intermediates)/product_image_info.txt |
| $(call generate-image-prop-dictionary, $(productimage_intermediates)/product_image_info.txt,product,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_PRODUCTIMAGE_TARGET := $(BUILT_PRODUCTIMAGE_TARGET) |
| $(INSTALLED_PRODUCTIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_PRODUCTIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_PRODUCT) |
| $(build-productimage-target) |
| |
| .PHONY: productimage-nodeps pnod |
| productimage-nodeps pnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-productimage-target) |
| |
| sync: $(INTERNAL_PRODUCTIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_PRODUCTIMAGE |
| INSTALLED_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_PRODUCTIMAGE),$(INSTALLED_PRODUCTIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system_ext partition image |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| INTERNAL_SYSTEM_EXTIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_EXT)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_SYSTEM_EXT := $(PRODUCT_OUT)/installed-files-system_ext.txt |
| INSTALLED_FILES_JSON_SYSTEM_EXT := $(INSTALLED_FILES_FILE_SYSTEM_EXT:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEM_EXT) |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT) : $(INTERNAL_SYSTEM_EXTIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_SYSTEM_EXT) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| system_extimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_ext) |
| BUILT_SYSTEM_EXTIMAGE_TARGET := $(PRODUCT_OUT)/system_ext.img |
| define build-system_extimage-target |
| $(call pretty,"Target system_ext fs image: $(INSTALLED_SYSTEM_EXTIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_EXT) |
| @mkdir -p $(system_extimage_intermediates) && rm -rf $(system_extimage_intermediates)/system_ext_image_info.txt |
| $(call generate-image-prop-dictionary, $(system_extimage_intermediates)/system_ext_image_info.txt,system_ext, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_EXT) \ |
| $(system_extimage_intermediates)/system_ext_image_info.txt \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET),$(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(BUILT_SYSTEM_EXTIMAGE_TARGET) |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_SYSTEM_EXTIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT) |
| $(build-system_extimage-target) |
| |
| .PHONY: systemextimage-nodeps senod |
| systemextimage-nodeps senod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-system_extimage-target) |
| |
| sync: $(INTERNAL_SYSTEM_EXTIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_SYSTEM_EXTIMAGE |
| INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(PRODUCT_OUT)/system_ext.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_SYSTEM_EXTIMAGE),$(INSTALLED_SYSTEM_EXTIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # odm partition image |
| ifdef BUILDING_ODM_IMAGE |
| INTERNAL_ODMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_ODM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Create symlinks for odm_dlkm on devices with a odm_dlkm partition: |
| # /odm/lib/modules -> /odm_dlkm/lib/modules |
| # |
| # On devices with a odm_dlkm partition, |
| # - /odm/lib/modules is a symlink to a directory that stores odm DLKMs. |
| # - /odm_dlkm/{etc,...} store other odm_dlkm files directly. The odm_dlkm partition is |
| # mounted at /odm_dlkm at runtime and the symlinks created in system/core/rootdir/Android.mk |
| # are hidden. |
| # On devices without a odm_dlkm partition, |
| # - /odm/lib/modules stores odm DLKMs directly. |
| # - /odm_dlkm/{etc,...} are symlinks to directories that store other odm_dlkm files. |
| # See system/core/rootdir/Android.mk for a list of created symlinks. |
| # The odm DLKMs and other odm_dlkm files must not be accessed using other paths because they |
| # are not guaranteed to exist on all devices. |
| ifdef BOARD_USES_ODM_DLKMIMAGE |
| INTERNAL_ODMIMAGE_FILES += $(call create-partition-compat-symlink,$(TARGET_OUT_ODM)/lib/modules,/odm_dlkm/lib/modules,odm_dlkm.img) |
| endif |
| |
| INSTALLED_FILES_FILE_ODM := $(PRODUCT_OUT)/installed-files-odm.txt |
| INSTALLED_FILES_JSON_ODM := $(INSTALLED_FILES_FILE_ODM:.txt=.json) |
| $(INSTALLED_FILES_FILE_ODM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ODM) |
| $(INSTALLED_FILES_FILE_ODM) : $(INTERNAL_ODMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_ODM) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| odmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,odm) |
| BUILT_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img |
| define build-odmimage-target |
| $(call pretty,"Target odm fs image: $(INSTALLED_ODMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_ODM) |
| @mkdir -p $(odmimage_intermediates) && rm -rf $(odmimage_intermediates)/odm_image_info.txt |
| $(call generate-image-prop-dictionary, $(odmimage_intermediates)/odm_image_info.txt, odm, \ |
| skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_ODM) $(odmimage_intermediates)/odm_image_info.txt \ |
| $(INSTALLED_ODMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_ODMIMAGE_TARGET),$(BOARD_ODMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_ODMIMAGE_TARGET := $(BUILT_ODMIMAGE_TARGET) |
| $(INSTALLED_ODMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_ODMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_ODM) |
| $(build-odmimage-target) |
| |
| .PHONY: odmimage-nodeps onod |
| odmimage-nodeps onod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-odmimage-target) |
| |
| sync: $(INTERNAL_ODMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_ODMIMAGE |
| INSTALLED_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_ODMIMAGE),$(INSTALLED_ODMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vendor_dlkm partition image |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| INTERNAL_VENDOR_DLKMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR_DLKM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_VENDOR_DLKM := $(PRODUCT_OUT)/installed-files-vendor_dlkm.txt |
| INSTALLED_FILES_JSON_VENDOR_DLKM := $(INSTALLED_FILES_FILE_VENDOR_DLKM:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_DLKM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_DLKM) |
| $(INSTALLED_FILES_FILE_VENDOR_DLKM) : $(INTERNAL_VENDOR_DLKMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_VENDOR_DLKM) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| vendor_dlkmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor_dlkm) |
| BUILT_VENDOR_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/vendor_dlkm.img |
| define build-vendor_dlkmimage-target |
| $(call pretty,"Target vendor_dlkm fs image: $(INSTALLED_VENDOR_DLKMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR_DLKM) |
| @mkdir -p $(vendor_dlkmimage_intermediates) && rm -rf $(vendor_dlkmimage_intermediates)/vendor_dlkm_image_info.txt |
| $(call generate-image-prop-dictionary, $(vendor_dlkmimage_intermediates)/vendor_dlkm_image_info.txt, \ |
| vendor_dlkm, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_VENDOR_DLKM) $(vendor_dlkmimage_intermediates)/vendor_dlkm_image_info.txt \ |
| $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_VENDOR_DLKMIMAGE_TARGET),$(BOARD_VENDOR_DLKMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDOR_DLKMIMAGE_TARGET := $(BUILT_VENDOR_DLKMIMAGE_TARGET) |
| $(INSTALLED_VENDOR_DLKMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_VENDOR_DLKMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_VENDOR_DLKM) |
| $(build-vendor_dlkmimage-target) |
| |
| .PHONY: vendor_dlkmimage-nodeps vdnod |
| vendor_dlkmimage-nodeps vdnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-vendor_dlkmimage-target) |
| |
| sync: $(INTERNAL_VENDOR_DLKMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_VENDOR_DLKMIMAGE |
| INSTALLED_VENDOR_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/vendor_dlkm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDOR_DLKMIMAGE),$(INSTALLED_VENDOR_DLKMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # odm_dlkm partition image |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| INTERNAL_ODM_DLKMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_ODM_DLKM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_ODM_DLKM := $(PRODUCT_OUT)/installed-files-odm_dlkm.txt |
| INSTALLED_FILES_JSON_ODM_DLKM := $(INSTALLED_FILES_FILE_ODM_DLKM:.txt=.json) |
| $(INSTALLED_FILES_FILE_ODM_DLKM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ODM_DLKM) |
| $(INSTALLED_FILES_FILE_ODM_DLKM) : $(INTERNAL_ODM_DLKMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_ODM_DLKM) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| odm_dlkmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,odm_dlkm) |
| BUILT_ODM_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/odm_dlkm.img |
| define build-odm_dlkmimage-target |
| $(call pretty,"Target odm_dlkm fs image: $(INSTALLED_ODM_DLKMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_ODM_DLKM) |
| @mkdir -p $(odm_dlkmimage_intermediates) && rm -rf $(odm_dlkmimage_intermediates)/odm_dlkm_image_info.txt |
| $(call generate-image-prop-dictionary, $(odm_dlkmimage_intermediates)/odm_dlkm_image_info.txt, \ |
| odm_dlkm, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_ODM_DLKM) $(odm_dlkmimage_intermediates)/odm_dlkm_image_info.txt \ |
| $(INSTALLED_ODM_DLKMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_ODM_DLKMIMAGE_TARGET),$(BOARD_ODM_DLKMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_ODM_DLKMIMAGE_TARGET := $(BUILT_ODM_DLKMIMAGE_TARGET) |
| $(INSTALLED_ODM_DLKMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_ODM_DLKMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_ODM_DLKM) |
| $(build-odm_dlkmimage-target) |
| |
| .PHONY: odm_dlkmimage-nodeps odnod |
| odm_dlkmimage-nodeps odnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-odm_dlkmimage-target) |
| |
| sync: $(INTERNAL_ODM_DLKMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_ODM_DLKMIMAGE |
| INSTALLED_ODM_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/odm_dlkm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_ODM_DLKMIMAGE),$(INSTALLED_ODM_DLKMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system_dlkm partition image |
| |
| ifdef BUILDING_SYSTEM_DLKM_IMAGE |
| |
| INTERNAL_SYSTEM_DLKMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_DLKM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_SYSTEM_DLKM := $(PRODUCT_OUT)/installed-files-system_dlkm.txt |
| INSTALLED_FILES_JSON_SYSTEM_DLKM := $(INSTALLED_FILES_FILE_SYSTEM_DLKM:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEM_DLKM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEM_DLKM) |
| $(INSTALLED_FILES_FILE_SYSTEM_DLKM): $(INTERNAL_SYSTEM_DLKMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| if [ -d "$(BOARD_SYSTEM_DLKM_SRC)" ]; then rsync -rupE $(BOARD_SYSTEM_DLKM_SRC)/ $(TARGET_OUT_SYSTEM_DLKM); fi |
| rm -f $@ |
| $(FILESLIST) $(TARGET_OUT_SYSTEM_DLKM) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| system_dlkmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_dlkm) |
| BUILT_SYSTEM_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/system_dlkm.img |
| define build-system_dlkmimage-target |
| $(call pretty,"Target system_dlkm fs image: $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_DLKM) |
| @mkdir -p $(system_dlkmimage_intermediates) && rm -rf $(system_dlkmimage_intermediates)/system_dlkm_image_info.txt |
| $(call generate-image-prop-dictionary, $(system_dlkmimage_intermediates)/system_dlkm_image_info.txt, \ |
| system_dlkm, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_DLKM) $(system_dlkmimage_intermediates)/system_dlkm_image_info.txt \ |
| $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_SYSTEM_DLKMIMAGE_TARGET),$(BOARD_SYSTEM_DLKMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEM_DLKMIMAGE_TARGET := $(BUILT_SYSTEM_DLKMIMAGE_TARGET) |
| $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_SYSTEM_DLKMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_SYSTEM_DLKM) |
| $(build-system_dlkmimage-target) |
| |
| .PHONY: system_dlkmimage-nodeps sdnod |
| system_dlkmimage-nodeps sdnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-system_dlkmimage-target) |
| |
| sync: $(INTERNAL_SYSTEM_DLKMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_SYSTEM_DLKMIMAGE |
| INSTALLED_SYSTEM_DLKMIMAGE_TARGET := $(PRODUCT_OUT)/system_dlkm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_SYSTEM_DLKMIMAGE),$(INSTALLED_SYSTEM_DLKMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # dtbo image |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| INSTALLED_DTBOIMAGE_TARGET := $(PRODUCT_OUT)/dtbo.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) $(AVBTOOL) $(BOARD_AVB_DTBO_KEY_PATH) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| $(call get-partition-size-argument,$(BOARD_DTBOIMG_PARTITION_SIZE)) \ |
| --partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \ |
| $(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| endif |
| |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| |
| # ----------------------------------------------------------------- |
| # Protected VM firmware image |
| ifeq ($(BOARD_USES_PVMFWIMAGE),true) |
| INSTALLED_PVMFWIMAGE_TARGET := $(PRODUCT_OUT)/pvmfw.img |
| INTERNAL_PREBUILT_PVMFWIMAGE := packages/modules/Virtualization/pvmfw/pvmfw.img |
| |
| ifdef BOARD_PREBUILT_PVMFWIMAGE |
| PREBUILT_PVMFWIMAGE_TARGET := $(BOARD_PREBUILT_PVMFWIMAGE) |
| else |
| PREBUILT_PVMFWIMAGE_TARGET := $(INTERNAL_PREBUILT_PVMFWIMAGE) |
| endif |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_PVMFWIMAGE_TARGET): $(PREBUILT_PVMFWIMAGE_TARGET) $(AVBTOOL) $(BOARD_AVB_PVMFW_KEY_PATH) |
| cp $< $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| $(call get-partition-size-argument,$(BOARD_PVMFWIMAGE_PARTITION_SIZE)) \ |
| --partition_name pvmfw $(INTERNAL_AVB_PVMFW_SIGNING_ARGS) \ |
| $(BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS) |
| else |
| $(eval $(call copy-one-file,$(PREBUILT_PVMFWIMAGE_TARGET),$(INSTALLED_PVMFWIMAGE_TARGET))) |
| endif |
| |
| endif # BOARD_USES_PVMFWIMAGE |
| |
| # Returns a list of image targets corresponding to the given list of partitions. For example, it |
| # returns "$(INSTALLED_PRODUCTIMAGE_TARGET)" for "product", or "$(INSTALLED_SYSTEMIMAGE_TARGET) |
| # $(INSTALLED_VENDORIMAGE_TARGET)" for "system vendor". |
| # (1): list of partitions like "system", "vendor" or "system product system_ext". |
| define images-for-partitions |
| $(strip $(foreach item,$(1),\ |
| $(if $(filter $(item),system_other),$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),\ |
| $(if $(filter $(item),init_boot),$(INSTALLED_INIT_BOOT_IMAGE_TARGET),\ |
| $(INSTALLED_$(call to-upper,$(item))IMAGE_TARGET))))) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # custom images |
| INSTALLED_CUSTOMIMAGES_TARGET := |
| |
| ifneq ($(strip $(BOARD_CUSTOMIMAGES_PARTITION_LIST)),) |
| INTERNAL_AVB_CUSTOMIMAGES_SIGNING_ARGS := |
| |
| # Sign custom image. |
| # $(1): the prebuilt custom image. |
| # $(2): the mount point of the prebuilt custom image. |
| # $(3): the signed custom image target. |
| define sign_custom_image |
| $(3): $(1) $(INTERNAL_USERIMAGES_DEPS) |
| @echo Target custom image: $(3) |
| mkdir -p $(dir $(3)) |
| cp $(1) $(3) |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$$$PATH \ |
| $(AVBTOOL) add_hashtree_footer \ |
| --image $(3) \ |
| --key $(BOARD_AVB_$(call to-upper,$(2))_KEY_PATH) \ |
| --algorithm $(BOARD_AVB_$(call to-upper,$(2))_ALGORITHM) \ |
| $(call get-partition-size-argument,$(BOARD_AVB_$(call to-upper,$(2))_PARTITION_SIZE)) \ |
| --partition_name $(2) \ |
| $(INTERNAL_AVB_CUSTOMIMAGES_SIGNING_ARGS) \ |
| $(BOARD_AVB_$(call to-upper,$(2))_ADD_HASHTREE_FOOTER_ARGS) |
| endif |
| INSTALLED_CUSTOMIMAGES_TARGET += $(3) |
| endef |
| |
| $(foreach partition,$(BOARD_CUSTOMIMAGES_PARTITION_LIST), \ |
| $(foreach image,$(BOARD_AVB_$(call to-upper,$(partition))_IMAGE_LIST), \ |
| $(eval $(call sign_custom_image,$(image),$(partition),$(PRODUCT_OUT)/$(notdir $(image)))))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vbmeta image |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| |
| BUILT_VBMETAIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta.img |
| AVB_CHAIN_KEY_DIR := $(TARGET_OUT_INTERMEDIATES)/avb_chain_keys |
| |
| ifdef BOARD_AVB_KEY_PATH |
| $(if $(BOARD_AVB_ALGORITHM),,$(error BOARD_AVB_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the 4096-bit test key. |
| BOARD_AVB_ALGORITHM := SHA256_RSA4096 |
| BOARD_AVB_KEY_PATH := external/avb/test/data/testkey_rsa4096.pem |
| endif |
| |
| # AVB signing for system_other.img. |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifdef BOARD_AVB_SYSTEM_OTHER_KEY_PATH |
| $(if $(BOARD_AVB_SYSTEM_OTHER_ALGORITHM),,$(error BOARD_AVB_SYSTEM_OTHER_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the same key as BOARD_AVB_KEY_PATH. |
| BOARD_AVB_SYSTEM_OTHER_KEY_PATH := $(BOARD_AVB_KEY_PATH) |
| BOARD_AVB_SYSTEM_OTHER_ALGORITHM := $(BOARD_AVB_ALGORITHM) |
| endif |
| |
| $(INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET): $(AVBTOOL) $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH) |
| @echo Extracting system_other avb key: $@ |
| @rm -f $@ |
| @mkdir -p $(dir $@) |
| $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH) --output $@ |
| |
| ifndef BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX |
| BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP) |
| endif |
| |
| BOARD_AVB_SYSTEM_OTHER_ADD_HASHTREE_FOOTER_ARGS += --rollback_index $(BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX) |
| endif # end of AVB for BUILDING_SYSTEM_OTHER_IMAGE |
| |
| INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES := \ |
| $(BOARD_AVB_VBMETA_SYSTEM) \ |
| $(BOARD_AVB_VBMETA_VENDOR) |
| |
| # Not allowing the same partition to appear in multiple groups. |
| ifneq ($(words $(sort $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))),$(words $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))) |
| $(error BOARD_AVB_VBMETA_SYSTEM and BOARD_AVB_VBMETA_VENDOR cannot have duplicates) |
| endif |
| |
| # When building a standalone recovery image for non-A/B devices, recovery image must be self-signed |
| # to be verified independently, and cannot be chained into vbmeta.img. See the link below for |
| # details. |
| ifeq ($(TARGET_OTA_ALLOW_NON_AB),true) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(if $(BOARD_AVB_RECOVERY_KEY_PATH),,\ |
| $(error BOARD_AVB_RECOVERY_KEY_PATH must be defined for if non-A/B is supported. \ |
| See https://android.googlesource.com/platform/external/avb/+/master/README.md#booting-into-recovery)) |
| endif |
| endif |
| |
| # Appends os version and security patch level as a AVB property descriptor |
| |
| BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system.os_version:$(PLATFORM_VERSION_LAST_STABLE) \ |
| --prop com.android.build.system.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.product.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.product.os_version:$(PLATFORM_VERSION_LAST_STABLE) \ |
| --prop com.android.build.product.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system_ext.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system_ext.os_version:$(PLATFORM_VERSION_LAST_STABLE) \ |
| --prop com.android.build.system_ext.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.boot.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.init_boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.init_boot.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| |
| BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.recovery.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.vendor.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.odm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_dlkm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.vendor_dlkm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm_dlkm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.odm_dlkm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_SYSTEM_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system_dlkm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system_dlkm.os_version:$(PLATFORM_VERSION_LAST_STABLE) |
| |
| BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.dtbo.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.pvmfw.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| # The following vendor- and odm-specific images needs explicit SPL set per board. |
| # TODO(b/210875415) Is this security_patch property used? Should it be removed from |
| # boot.img when there is no platform ramdisk included in it? |
| ifdef BOOT_SECURITY_PATCH |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.boot.security_patch:$(BOOT_SECURITY_PATCH) |
| endif |
| |
| ifdef INIT_BOOT_SECURITY_PATCH |
| BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.init_boot.security_patch:$(INIT_BOOT_SECURITY_PATCH) |
| else ifdef BOOT_SECURITY_PATCH |
| BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.init_boot.security_patch:$(BOOT_SECURITY_PATCH) |
| endif |
| |
| ifdef VENDOR_SECURITY_PATCH |
| BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor.security_patch:$(VENDOR_SECURITY_PATCH) |
| endif |
| |
| ifdef ODM_SECURITY_PATCH |
| BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm.security_patch:$(ODM_SECURITY_PATCH) |
| endif |
| |
| ifdef VENDOR_DLKM_SECURITY_PATCH |
| BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_dlkm.security_patch:$(VENDOR_DLKM_SECURITY_PATCH) |
| endif |
| |
| ifdef ODM_DLKM_SECURITY_PATCH |
| BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm_dlkm.security_patch:$(ODM_DLKM_SECURITY_PATCH) |
| endif |
| |
| ifdef SYSTEM_DLKM_SECURITY_PATCH |
| BOARD_AVB_SYSTEM_DLKM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system_dlkm.security_patch:$(SYSTEM_DLKM_SECURITY_PATCH) |
| endif |
| |
| ifdef PVMFW_SECURITY_PATCH |
| BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.pvmfw.security_patch:$(PVMFW_SECURITY_PATCH) |
| endif |
| |
| # For upgrading devices without a init_boot partition, the init_boot footer args |
| # should fallback to boot partition footer. |
| ifndef INSTALLED_INIT_BOOT_IMAGE_TARGET |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| $(BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS) |
| endif |
| |
| BOOT_FOOTER_ARGS := BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS |
| INIT_BOOT_FOOTER_ARGS := BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS |
| VENDOR_BOOT_FOOTER_ARGS := BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS |
| DTBO_FOOTER_ARGS := BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS |
| PVMFW_FOOTER_ARGS := BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS |
| SYSTEM_FOOTER_ARGS := BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS |
| VENDOR_FOOTER_ARGS := BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS |
| RECOVERY_FOOTER_ARGS := BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS |
| PRODUCT_FOOTER_ARGS := BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS |
| SYSTEM_EXT_FOOTER_ARGS := BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS |
| ODM_FOOTER_ARGS := BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS |
| VENDOR_DLKM_FOOTER_ARGS := BOARD_AVB_VENDOR_DLKM_ADD_HASHTREE_FOOTER_ARGS |
| ODM_DLKM_FOOTER_ARGS := BOARD_AVB_ODM_DLKM_ADD_HASHTREE_FOOTER_ARGS |
| SYSTEM_DLKM_FOOTER_ARGS := BOARD_AVB_SYSTEM_DLKM_ADD_HASHTREE_FOOTER_ARGS |
| |
| # Helper function that checks and sets required build variables for an AVB chained partition. |
| # $(1): the partition to enable AVB chain, e.g., boot or system or vbmeta_system. |
| define _check-and-set-avb-chain-args |
| $(eval part := $(1)) |
| $(eval PART=$(call to-upper,$(part))) |
| |
| $(eval _key_path := BOARD_AVB_$(PART)_KEY_PATH) |
| $(eval _signing_algorithm := BOARD_AVB_$(PART)_ALGORITHM) |
| $(eval _rollback_index := BOARD_AVB_$(PART)_ROLLBACK_INDEX) |
| $(eval _rollback_index_location := BOARD_AVB_$(PART)_ROLLBACK_INDEX_LOCATION) |
| $(if $($(_key_path)),,$(error $(_key_path) is not defined)) |
| $(if $($(_signing_algorithm)),,$(error $(_signing_algorithm) is not defined)) |
| $(if $($(_rollback_index)),,$(error $(_rollback_index) is not defined)) |
| $(if $($(_rollback_index_location)),,$(error $(_rollback_index_location) is not defined)) |
| |
| # Set INTERNAL_AVB_(PART)_SIGNING_ARGS |
| $(eval _signing_args := INTERNAL_AVB_$(PART)_SIGNING_ARGS) |
| $(eval $(_signing_args) := \ |
| --algorithm $($(_signing_algorithm)) --key $($(_key_path))) |
| |
| # The recovery partition in non-A/B devices should be verified separately. Skip adding the chain |
| # partition descriptor for recovery partition into vbmeta.img. |
| $(if $(or $(filter-out true,$(TARGET_OTA_ALLOW_NON_AB)),$(filter-out recovery,$(part))),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey)) |
| |
| # Set rollback_index via footer args for non-chained vbmeta image. Chained vbmeta image will pick up |
| # the index via a separate flag (e.g. BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX). |
| $(if $(filter $(part),$(part:vbmeta_%=%)),\ |
| $(eval _footer_args := $(PART)_FOOTER_ARGS) \ |
| $(eval $($(_footer_args)) += --rollback_index $($(_rollback_index)))) |
| endef |
| |
| # Checks and sets the required build variables for an AVB partition. The partition will be |
| # configured as a chained partition, if BOARD_AVB_<partition>_KEY_PATH is defined. Otherwise the |
| # image descriptor will be included into vbmeta.img, unless it has been already added to any chained |
| # VBMeta image. |
| # Multiple boot images can be generated based on BOARD_KERNEL_BINARIES |
| # but vbmeta would capture the image descriptor of only the first boot |
| # image specified in BUILT_BOOTIMAGE_TARGET. |
| # $(1): Partition name, e.g. boot or system. |
| define check-and-set-avb-args |
| $(eval _in_chained_vbmeta := $(filter $(1),$(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))) |
| $(if $(BOARD_AVB_$(call to-upper,$(1))_KEY_PATH),\ |
| $(if $(_in_chained_vbmeta),\ |
| $(error Chaining partition "$(1)" in chained VBMeta image is not supported)) \ |
| $(call _check-and-set-avb-chain-args,$(1)),\ |
| $(if $(_in_chained_vbmeta),,\ |
| $(if $(filter boot,$(1)),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(firstword $(call images-for-partitions,$(1)))),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(call images-for-partitions,$(1)))))) |
| endef |
| |
| # Checks and sets build variables for a custom chained partition to include it into vbmeta.img. |
| # $(1): the custom partition to enable AVB chain. |
| define check-and-set-custom-avb-chain-args |
| $(eval part := $(1)) |
| $(eval PART=$(call to-upper,$(part))) |
| $(eval _rollback_index_location := BOARD_AVB_$(PART)_ROLLBACK_INDEX_LOCATION) |
| $(if $($(_rollback_index_location)),,$(error $(_rollback_index_location) is not defined)) |
| |
| INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey |
| endef |
| |
| ifdef INSTALLED_BOOTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,boot)) |
| endif |
| |
| ifdef INSTALLED_INIT_BOOT_IMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,init_boot)) |
| endif |
| |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,vendor_boot)) |
| endif |
| |
| ifdef INSTALLED_SYSTEMIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,system)) |
| endif |
| |
| ifdef INSTALLED_VENDORIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,vendor)) |
| endif |
| |
| ifdef INSTALLED_PRODUCTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,product)) |
| endif |
| |
| ifdef INSTALLED_SYSTEM_EXTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,system_ext)) |
| endif |
| |
| ifdef INSTALLED_ODMIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,odm)) |
| endif |
| |
| ifdef INSTALLED_VENDOR_DLKMIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,vendor_dlkm)) |
| endif |
| |
| ifdef INSTALLED_ODM_DLKMIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,odm_dlkm)) |
| endif |
| |
| ifdef INSTALLED_SYSTEM_DLKMIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,system_dlkm)) |
| endif |
| |
| ifdef INSTALLED_DTBOIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,dtbo)) |
| endif |
| |
| ifdef INSTALLED_PVMFWIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,pvmfw)) |
| endif |
| |
| ifdef INSTALLED_RECOVERYIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,recovery)) |
| endif |
| |
| # Not using INSTALLED_VBMETA_SYSTEMIMAGE_TARGET as it won't be set yet. |
| ifdef BOARD_AVB_VBMETA_SYSTEM |
| $(eval $(call check-and-set-avb-args,vbmeta_system)) |
| endif |
| |
| ifdef BOARD_AVB_VBMETA_VENDOR |
| $(eval $(call check-and-set-avb-args,vbmeta_vendor)) |
| endif |
| |
| ifneq ($(strip $(BOARD_CUSTOMIMAGES_PARTITION_LIST)),) |
| $(foreach partition,$(BOARD_CUSTOMIMAGES_PARTITION_LIST), \ |
| $(eval $(call check-and-set-custom-avb-chain-args,$(partition)))) |
| endif |
| |
| # Add kernel cmdline descriptor for kernel to mount system.img as root with |
| # dm-verity. This works when system.img is either chained or not-chained: |
| # - chained: The --setup_as_rootfs_from_kernel option will add dm-verity kernel |
| # cmdline descriptor to system.img |
| # - not-chained: The --include_descriptors_from_image option for make_vbmeta_image |
| # will include the kernel cmdline descriptor from system.img into vbmeta.img |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| ifeq ($(filter system, $(BOARD_SUPER_PARTITION_PARTITION_LIST)),) |
| BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += --setup_as_rootfs_from_kernel |
| endif |
| endif |
| |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --padding_size 4096 |
| BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS += --padding_size 4096 |
| BOARD_AVB_MAKE_VBMETA_VENDOR_IMAGE_ARGS += --padding_size 4096 |
| |
| ifeq (eng,$(filter eng, $(TARGET_BUILD_VARIANT))) |
| # We only need the flag in top-level vbmeta.img. |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag |
| endif |
| |
| ifdef BOARD_AVB_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --rollback_index $(BOARD_AVB_ROLLBACK_INDEX) |
| endif |
| |
| ifdef BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS += \ |
| --rollback_index $(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX) |
| endif |
| |
| ifdef BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_VENDOR_IMAGE_ARGS += \ |
| --rollback_index $(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX) |
| endif |
| |
| # $(1): the directory to extract public keys to |
| define extract-avb-chain-public-keys |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_BOOT_KEY_PATH) \ |
| --output $(1)/boot.avbpubkey) |
| $(if $(BOARD_AVB_INIT_BOOT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_INIT_BOOT_KEY_PATH) \ |
| --output $(1)/init_boot.avbpubkey) |
| $(if $(BOARD_AVB_VENDOR_BOOT_KEY_PATH),\ |
| $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_BOOT_KEY_PATH) \ |
| --output $(1)/vendor_boot.avbpubkey) |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_KEY_PATH) \ |
| --output $(1)/system.avbpubkey) |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_KEY_PATH) \ |
| --output $(1)/vendor.avbpubkey) |
| $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_PRODUCT_KEY_PATH) \ |
| --output $(1)/product.avbpubkey) |
| $(if $(BOARD_AVB_SYSTEM_EXT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_EXT_KEY_PATH) \ |
| --output $(1)/system_ext.avbpubkey) |
| $(if $(BOARD_AVB_ODM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_ODM_KEY_PATH) \ |
| --output $(1)/odm.avbpubkey) |
| $(if $(BOARD_AVB_VENDOR_DLKM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_DLKM_KEY_PATH) \ |
| --output $(1)/vendor_dlkm.avbpubkey) |
| $(if $(BOARD_AVB_ODM_DLKM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_ODM_DLKM_KEY_PATH) \ |
| --output $(1)/odm_dlkm.avbpubkey) |
| $(if $(BOARD_AVB_SYSTEM_DLKM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_DLKM_KEY_PATH) \ |
| --output $(1)/system_dlkm.avbpubkey) |
| $(if $(BOARD_AVB_DTBO_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_DTBO_KEY_PATH) \ |
| --output $(1)/dtbo.avbpubkey) |
| $(if $(BOARD_AVB_PVMFW_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_PVMFW_KEY_PATH) \ |
| --output $(1)/pvmfw.avbpubkey) |
| $(if $(BOARD_AVB_RECOVERY_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_RECOVERY_KEY_PATH) \ |
| --output $(1)/recovery.avbpubkey) |
| $(if $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) \ |
| --output $(1)/vbmeta_system.avbpubkey) |
| $(if $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) \ |
| --output $(1)/vbmeta_vendor.avbpubkey) |
| $(if $(BOARD_CUSTOMIMAGES_PARTITION_LIST),\ |
| $(hide) $(foreach partition,$(BOARD_CUSTOMIMAGES_PARTITION_LIST), \ |
| $(AVBTOOL) extract_public_key --key $(BOARD_AVB_$(call to-upper,$(partition))_KEY_PATH) \ |
| --output $(1)/$(partition).avbpubkey;)) |
| endef |
| |
| # Builds a chained VBMeta image. This VBMeta image will contain the descriptors for the partitions |
| # specified in BOARD_AVB_VBMETA_<NAME>. The built VBMeta image will be included into the top-level |
| # vbmeta image as a chained partition. For example, if a target defines `BOARD_AVB_VBMETA_SYSTEM |
| # := system system_ext`, `vbmeta_system.img` will be created that includes the descriptors for |
| # `system.img` and `system_ext.img`. `vbmeta_system.img` itself will be included into |
| # `vbmeta.img` as a chained partition. |
| # $(1): VBMeta image name, such as "vbmeta_system", "vbmeta_vendor" etc. |
| # $(2): Output filename. |
| define build-chained-vbmeta-image |
| $(call pretty,"Target chained vbmeta image: $@") |
| $(hide) $(AVBTOOL) make_vbmeta_image \ |
| $(INTERNAL_AVB_$(call to-upper,$(1))_SIGNING_ARGS) \ |
| $(BOARD_AVB_MAKE_$(call to-upper,$(1))_IMAGE_ARGS) \ |
| $(foreach image,$(BOARD_AVB_$(call to-upper,$(1))), \ |
| --include_descriptors_from_image $(call images-for-partitions,$(image))) \ |
| --output $@ |
| endef |
| |
| ifdef BUILDING_SYSTEM_IMAGE |
| ifdef BOARD_AVB_VBMETA_SYSTEM |
| INSTALLED_VBMETA_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta_system.img |
| $(INSTALLED_VBMETA_SYSTEMIMAGE_TARGET): \ |
| $(AVBTOOL) \ |
| $(call images-for-partitions,$(BOARD_AVB_VBMETA_SYSTEM)) \ |
| $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) |
| $(call build-chained-vbmeta-image,vbmeta_system) |
| endif |
| endif # BUILDING_SYSTEM_IMAGE |
| |
| ifdef BOARD_AVB_VBMETA_VENDOR |
| INSTALLED_VBMETA_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta_vendor.img |
| $(INSTALLED_VBMETA_VENDORIMAGE_TARGET): \ |
| $(AVBTOOL) \ |
| $(call images-for-partitions,$(BOARD_AVB_VBMETA_VENDOR)) \ |
| $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) |
| $(call build-chained-vbmeta-image,vbmeta_vendor) |
| endif |
| |
| define build-vbmetaimage-target |
| $(call pretty,"Target vbmeta image: $(INSTALLED_VBMETAIMAGE_TARGET)") |
| $(hide) mkdir -p $(AVB_CHAIN_KEY_DIR) |
| $(call extract-avb-chain-public-keys, $(AVB_CHAIN_KEY_DIR)) |
| $(hide) $(AVBTOOL) make_vbmeta_image \ |
| $(INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS) \ |
| $(PRIVATE_AVB_VBMETA_SIGNING_ARGS) \ |
| $(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS) \ |
| --output $@ |
| $(hide) rm -rf $(AVB_CHAIN_KEY_DIR) |
| endef |
| |
| ifdef BUILDING_VBMETA_IMAGE |
| INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_VBMETAIMAGE_TARGET) |
| $(INSTALLED_VBMETAIMAGE_TARGET): PRIVATE_AVB_VBMETA_SIGNING_ARGS := \ |
| --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH) |
| |
| $(INSTALLED_VBMETAIMAGE_TARGET): \ |
| $(AVBTOOL) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET) \ |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) \ |
| $(INSTALLED_ODM_DLKMIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET) \ |
| $(INSTALLED_DTBOIMAGE_TARGET) \ |
| $(INSTALLED_PVMFWIMAGE_TARGET) \ |
| $(INSTALLED_CUSTOMIMAGES_TARGET) \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_VBMETA_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_VBMETA_VENDORIMAGE_TARGET) \ |
| $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) \ |
| $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) \ |
| $(BOARD_AVB_KEY_PATH) |
| $(build-vbmetaimage-target) |
| |
| .PHONY: vbmetaimage-nodeps |
| vbmetaimage-nodeps: PRIVATE_AVB_VBMETA_SIGNING_ARGS := \ |
| --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH) |
| vbmetaimage-nodeps: |
| $(build-vbmetaimage-target) |
| endif # BUILDING_VBMETA_IMAGE |
| |
| endif # BOARD_AVB_ENABLE |
| |
| # List of files from all images |
| INTERNAL_ALLIMAGES_FILES := \ |
| $(FULL_SYSTEMIMAGE_DEPS) \ |
| $(INTERNAL_RAMDISK_FILES) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) \ |
| $(INTERNAL_VENDORIMAGE_FILES) \ |
| $(INTERNAL_PRODUCTIMAGE_FILES) \ |
| $(INTERNAL_SYSTEM_EXTIMAGE_FILES) \ |
| $(INTERNAL_ODMIMAGE_FILES) \ |
| $(INTERNAL_VENDOR_DLKMIMAGE_FILES) \ |
| $(INTERNAL_ODM_DLKMIMAGE_FILES) \ |
| $(INTERNAL_SYSTEM_DLKMIMAGE_FILES) \ |
| |
| # ----------------------------------------------------------------- |
| # Check VINTF of build |
| |
| # Note: vendor_dlkm, odm_dlkm, and system_dlkm does not have VINTF files. |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| |
| intermediates := $(call intermediates-dir-for,PACKAGING,check_vintf_all) |
| check_vintf_all_deps := |
| |
| # The build system only writes VINTF metadata to */etc/vintf paths. Legacy paths aren't needed here |
| # because they are only used for prebuilt images. |
| check_vintf_common_srcs_patterns := \ |
| $(TARGET_OUT)/etc/vintf/% \ |
| $(TARGET_OUT_VENDOR)/etc/vintf/% \ |
| $(TARGET_OUT_ODM)/etc/vintf/% \ |
| $(TARGET_OUT_PRODUCT)/etc/vintf/% \ |
| $(TARGET_OUT_SYSTEM_EXT)/etc/vintf/% \ |
| |
| check_vintf_common_srcs := $(sort $(filter $(check_vintf_common_srcs_patterns),$(INTERNAL_ALLIMAGES_FILES))) |
| check_vintf_common_srcs_patterns := |
| |
| check_vintf_has_system := |
| check_vintf_has_vendor := |
| |
| ifneq (,$(filter EMPTY_ODM_SKU_PLACEHOLDER,$(ODM_MANIFEST_SKUS))) |
| $(error EMPTY_ODM_SKU_PLACEHOLDER is an internal variable and cannot be used for ODM_MANIFEST_SKUS) |
| endif |
| ifneq (,$(filter EMPTY_VENDOR_SKU_PLACEHOLDER,$(DEVICE_MANIFEST_SKUS))) |
| $(error EMPTY_VENDOR_SKU_PLACEHOLDER is an internal variable and cannot be used for DEIVCE_MANIFEST_SKUS) |
| endif |
| |
| # -- Check system manifest / matrix including fragments (excluding other framework manifests / matrices, e.g. product); |
| check_vintf_system_deps := $(filter $(TARGET_OUT)/etc/vintf/%, $(check_vintf_common_srcs)) |
| ifneq ($(check_vintf_system_deps),) |
| check_vintf_has_system := true |
| |
| check_vintf_system_log := $(intermediates)/check_vintf_system.log |
| check_vintf_all_deps += $(check_vintf_system_log) |
| $(check_vintf_system_log): $(HOST_OUT_EXECUTABLES)/checkvintf $(check_vintf_system_deps) |
| @( $< --check-one --dirmap /system:$(TARGET_OUT) > $@ 2>&1 ) || ( cat $@ && exit 1 ) |
| check_vintf_system_log := |
| |
| vintffm_log := $(intermediates)/vintffm.log |
| check_vintf_all_deps += $(vintffm_log) |
| $(vintffm_log): $(HOST_OUT_EXECUTABLES)/vintffm $(check_vintf_system_deps) |
| @( $< --check --dirmap /system:$(TARGET_OUT) \ |
| $(VINTF_FRAMEWORK_MANIFEST_FROZEN_DIR) > $@ 2>&1 ) || ( cat $@ && exit 1 ) |
| |
| endif # check_vintf_system_deps |
| check_vintf_system_deps := |
| |
| # -- Check vendor manifest / matrix including fragments (excluding other device manifests / matrices) |
| check_vintf_vendor_deps := $(filter $(TARGET_OUT_VENDOR)/etc/vintf/%, $(check_vintf_common_srcs)) |
| ifneq ($(check_vintf_vendor_deps),) |
| check_vintf_has_vendor := true |
| check_vintf_vendor_log := $(intermediates)/check_vintf_vendor.log |
| check_vintf_all_deps += $(check_vintf_vendor_log) |
| # Check vendor SKU=(empty) case when: |
| # - DEVICE_MANIFEST_FILE is not empty; OR |
| # - DEVICE_MANIFEST_FILE is empty AND DEVICE_MANIFEST_SKUS is empty (only vendor manifest fragments are used) |
| $(check_vintf_vendor_log): PRIVATE_VENDOR_SKUS := \ |
| $(if $(DEVICE_MANIFEST_FILE),EMPTY_VENDOR_SKU_PLACEHOLDER,\ |
| $(if $(DEVICE_MANIFEST_SKUS),,EMPTY_VENDOR_SKU_PLACEHOLDER)) \ |
| $(DEVICE_MANIFEST_SKUS) |
| $(check_vintf_vendor_log): $(HOST_OUT_EXECUTABLES)/checkvintf $(check_vintf_vendor_deps) |
| $(foreach vendor_sku,$(PRIVATE_VENDOR_SKUS), \ |
| ( $< --check-one --dirmap /vendor:$(TARGET_OUT_VENDOR) \ |
| --property ro.boot.product.vendor.sku=$(filter-out EMPTY_VENDOR_SKU_PLACEHOLDER,$(vendor_sku)) \ |
| > $@ 2>&1 ) || ( cat $@ && exit 1 ); ) |
| check_vintf_vendor_log := |
| endif # check_vintf_vendor_deps |
| check_vintf_vendor_deps := |
| |
| # -- Kernel version and configurations. |
| ifeq ($(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS),true) |
| |
| BUILT_KERNEL_CONFIGS_FILE := $(intermediates)/kernel_configs.txt |
| BUILT_KERNEL_VERSION_FILE := $(intermediates)/kernel_version.txt |
| |
| my_board_extracted_kernel := |
| |
| # BOARD_KERNEL_CONFIG_FILE and BOARD_KERNEL_VERSION can be used to override the values extracted |
| # from INSTALLED_KERNEL_TARGET. |
| ifdef BOARD_KERNEL_CONFIG_FILE |
| ifdef BOARD_KERNEL_VERSION |
| $(BUILT_KERNEL_CONFIGS_FILE): $(BOARD_KERNEL_CONFIG_FILE) |
| cp $< $@ |
| $(BUILT_KERNEL_VERSION_FILE): |
| echo $(BOARD_KERNEL_VERSION) > $@ |
| |
| my_board_extracted_kernel := true |
| endif # BOARD_KERNEL_VERSION |
| endif # BOARD_KERNEL_CONFIG_FILE |
| |
| ifneq ($(my_board_extracted_kernel),true) |
| # Tools for decompression that is not in PATH. |
| # Check $(EXTRACT_KERNEL) for decompression algorithms supported by the script. |
| # Algorithms that are in the script but not in this list will be found in PATH. |
| my_decompress_tools := \ |
| lz4:$(HOST_OUT_EXECUTABLES)/lz4 \ |
| |
| endif # my_board_extracted_kernel |
| |
| ifneq ($(my_board_extracted_kernel),true) |
| ifdef INSTALLED_KERNEL_TARGET |
| $(BUILT_KERNEL_CONFIGS_FILE): .KATI_IMPLICIT_OUTPUTS := $(BUILT_KERNEL_VERSION_FILE) |
| $(BUILT_KERNEL_CONFIGS_FILE): PRIVATE_DECOMPRESS_TOOLS := $(my_decompress_tools) |
| $(BUILT_KERNEL_CONFIGS_FILE): $(foreach pair,$(my_decompress_tools),$(call word-colon,2,$(pair))) |
| $(BUILT_KERNEL_CONFIGS_FILE): $(EXTRACT_KERNEL) $(firstword $(INSTALLED_KERNEL_TARGET)) |
| $< --tools $(PRIVATE_DECOMPRESS_TOOLS) --input $(firstword $(INSTALLED_KERNEL_TARGET)) \ |
| --output-configs $@ \ |
| --output-release $(BUILT_KERNEL_VERSION_FILE) |
| |
| my_board_extracted_kernel := true |
| endif # INSTALLED_KERNEL_TARGET |
| endif # my_board_extracted_kernel |
| |
| ifneq ($(my_board_extracted_kernel),true) |
| ifdef INSTALLED_BOOTIMAGE_TARGET |
| $(BUILT_KERNEL_CONFIGS_FILE): .KATI_IMPLICIT_OUTPUTS := $(BUILT_KERNEL_VERSION_FILE) |
| $(BUILT_KERNEL_CONFIGS_FILE): PRIVATE_DECOMPRESS_TOOLS := $(my_decompress_tools) |
| $(BUILT_KERNEL_CONFIGS_FILE): $(foreach pair,$(my_decompress_tools),$(call word-colon,2,$(pair))) |
| $(BUILT_KERNEL_CONFIGS_FILE): PRIVATE_UNPACKED_BOOTIMG := $(intermediates)/unpacked_bootimage |
| $(BUILT_KERNEL_CONFIGS_FILE): \ |
| $(HOST_OUT_EXECUTABLES)/unpack_bootimg \ |
| $(EXTRACT_KERNEL) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) |
| $(HOST_OUT_EXECUTABLES)/unpack_bootimg --boot_img $(INSTALLED_BOOTIMAGE_TARGET) --out $(PRIVATE_UNPACKED_BOOTIMG) |
| $(EXTRACT_KERNEL) --tools $(PRIVATE_DECOMPRESS_TOOLS) --input $(PRIVATE_UNPACKED_BOOTIMG)/kernel \ |
| --output-configs $@ \ |
| --output-release $(BUILT_KERNEL_VERSION_FILE) |
| |
| my_board_extracted_kernel := true |
| endif # INSTALLED_BOOTIMAGE_TARGET |
| endif # my_board_extracted_kernel |
| |
| ifneq ($(my_board_extracted_kernel),true) |
| $(warning Neither INSTALLED_KERNEL_TARGET nor INSTALLED_BOOTIMAGE_TARGET is defined when \ |
| PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS is true. Information about the updated kernel \ |
| cannot be built into OTA update package. You can fix this by: \ |
| (1) setting TARGET_NO_KERNEL to false and installing the built kernel to $(PRODUCT_OUT)/kernel,\ |
| so that kernel information will be extracted from the built kernel; or \ |
| (2) Add a prebuilt boot image and specify it in BOARD_PREBUILT_BOOTIMAGE; or \ |
| (3) extracting kernel configuration and defining BOARD_KERNEL_CONFIG_FILE and \ |
| BOARD_KERNEL_VERSION manually; or \ |
| (4) unsetting PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS manually.) |
| # Clear their values to indicate that these two files does not exist. |
| BUILT_KERNEL_CONFIGS_FILE := |
| BUILT_KERNEL_VERSION_FILE := |
| endif |
| |
| my_decompress_tools := |
| my_board_extracted_kernel := |
| |
| endif # PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS |
| |
| # -- Check VINTF compatibility of build. |
| # Skip partial builds; only check full builds. Only check if: |
| # - PRODUCT_ENFORCE_VINTF_MANIFEST is true |
| # - system / vendor VINTF metadata exists |
| # - Building product / system_ext / odm images if board has product / system_ext / odm images |
| ifeq ($(PRODUCT_ENFORCE_VINTF_MANIFEST),true) |
| ifeq ($(check_vintf_has_system),true) |
| ifeq ($(check_vintf_has_vendor),true) |
| ifeq ($(filter true,$(BUILDING_ODM_IMAGE)),$(filter true,$(BOARD_USES_ODMIMAGE))) |
| ifeq ($(filter true,$(BUILDING_PRODUCT_IMAGE)),$(filter true,$(BOARD_USES_PRODUCTIMAGE))) |
| ifeq ($(filter true,$(BUILDING_SYSTEM_EXT_IMAGE)),$(filter true,$(BOARD_USES_SYSTEM_EXTIMAGE))) |
| |
| check_vintf_compatible_log := $(intermediates)/check_vintf_compatible.log |
| check_vintf_all_deps += $(check_vintf_compatible_log) |
| |
| check_vintf_compatible_args := |
| check_vintf_compatible_deps := $(check_vintf_common_srcs) |
| |
| ifeq ($(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS),true) |
| ifneq (,$(BUILT_KERNEL_VERSION_FILE)$(BUILT_KERNEL_CONFIGS_FILE)) |
| check_vintf_compatible_args += --kernel $(BUILT_KERNEL_VERSION_FILE):$(BUILT_KERNEL_CONFIGS_FILE) |
| check_vintf_compatible_deps += $(BUILT_KERNEL_CONFIGS_FILE) $(BUILT_KERNEL_VERSION_FILE) |
| endif # BUILT_KERNEL_VERSION_FILE != "" || BUILT_KERNEL_CONFIGS_FILE != "" |
| endif # PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS |
| |
| check_vintf_compatible_args += \ |
| --dirmap /system:$(TARGET_OUT) \ |
| --dirmap /vendor:$(TARGET_OUT_VENDOR) \ |
| --dirmap /odm:$(TARGET_OUT_ODM) \ |
| --dirmap /product:$(TARGET_OUT_PRODUCT) \ |
| --dirmap /system_ext:$(TARGET_OUT_SYSTEM_EXT) \ |
| |
| ifdef PRODUCT_SHIPPING_API_LEVEL |
| check_vintf_compatible_args += --property ro.product.first_api_level=$(PRODUCT_SHIPPING_API_LEVEL) |
| endif # PRODUCT_SHIPPING_API_LEVEL |
| |
| $(check_vintf_compatible_log): PRIVATE_CHECK_VINTF_ARGS := $(check_vintf_compatible_args) |
| $(check_vintf_compatible_log): PRIVATE_CHECK_VINTF_DEPS := $(check_vintf_compatible_deps) |
| # Check ODM SKU=(empty) case when: |
| # - ODM_MANIFEST_FILES is not empty; OR |
| # - ODM_MANIFEST_FILES is empty AND ODM_MANIFEST_SKUS is empty (only ODM manifest fragments are used) |
| $(check_vintf_compatible_log): PRIVATE_ODM_SKUS := \ |
| $(if $(ODM_MANIFEST_FILES),EMPTY_ODM_SKU_PLACEHOLDER,\ |
| $(if $(ODM_MANIFEST_SKUS),,EMPTY_ODM_SKU_PLACEHOLDER)) \ |
| $(ODM_MANIFEST_SKUS) |
| # Check vendor SKU=(empty) case when: |
| # - DEVICE_MANIFEST_FILE is not empty; OR |
| # - DEVICE_MANIFEST_FILE is empty AND DEVICE_MANIFEST_SKUS is empty (only vendor manifest fragments are used) |
| $(check_vintf_compatible_log): PRIVATE_VENDOR_SKUS := \ |
| $(if $(DEVICE_MANIFEST_FILE),EMPTY_VENDOR_SKU_PLACEHOLDER,\ |
| $(if $(DEVICE_MANIFEST_SKUS),,EMPTY_VENDOR_SKU_PLACEHOLDER)) \ |
| $(DEVICE_MANIFEST_SKUS) |
| $(check_vintf_compatible_log): $(HOST_OUT_EXECUTABLES)/checkvintf $(check_vintf_compatible_deps) |
| @echo "PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS=$(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS)" > $@ |
| @echo -n -e 'Deps: \n ' >> $@ |
| @sed 's/ /\n /g' <<< "$(PRIVATE_CHECK_VINTF_DEPS)" >> $@ |
| @echo -n -e 'Args: \n ' >> $@ |
| @cat <<< "$(PRIVATE_CHECK_VINTF_ARGS)" >> $@ |
| $(foreach odm_sku,$(PRIVATE_ODM_SKUS), $(foreach vendor_sku,$(PRIVATE_VENDOR_SKUS), \ |
| echo "For ODM SKU = $(odm_sku), vendor SKU = $(vendor_sku)" >> $@; \ |
| ( $< --check-compat $(PRIVATE_CHECK_VINTF_ARGS) \ |
| --property ro.boot.product.hardware.sku=$(filter-out EMPTY_ODM_SKU_PLACEHOLDER,$(odm_sku)) \ |
| --property ro.boot.product.vendor.sku=$(filter-out EMPTY_VENDOR_SKU_PLACEHOLDER,$(vendor_sku)) \ |
| >> $@ 2>&1 ) || (cat $@ && exit 1); )) |
| |
| check_vintf_compatible_log := |
| check_vintf_compatible_args := |
| check_vintf_compatible_deps := |
| |
| endif # BUILDING_SYSTEM_EXT_IMAGE equals BOARD_USES_SYSTEM_EXTIMAGE |
| endif # BUILDING_PRODUCT_IMAGE equals BOARD_USES_PRODUCTIMAGE |
| endif # BUILDING_ODM_IMAGE equals BOARD_USES_ODMIMAGE |
| endif # check_vintf_has_vendor |
| endif # check_vintf_has_system |
| endif # PRODUCT_ENFORCE_VINTF_MANIFEST |
| |
| # Add all logs of VINTF checks to dist builds |
| droid_targets: $(check_vintf_all_deps) |
| $(call dist-for-goals, droid_targets, $(check_vintf_all_deps)) |
| |
| # Helper alias to check all VINTF of current build. |
| .PHONY: check-vintf-all |
| check-vintf-all: $(check_vintf_all_deps) |
| $(foreach file,$^,echo "$(file)"; cat "$(file)"; echo;) |
| |
| check_vintf_has_vendor := |
| check_vintf_has_system := |
| check_vintf_common_srcs := |
| check_vintf_all_deps := |
| intermediates := |
| endif # !TARGET_BUILD_UNBUNDLED |
| |
| # ----------------------------------------------------------------- |
| # Check image sizes <= size of super partition |
| |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| |
| ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION)) |
| |
| PARTITIONS_AND_OTHER_IN_SUPER := $(BOARD_SUPER_PARTITION_PARTITION_LIST) |
| |
| # Add the system other image to the misc_info. Because factory ota may install system_other to the super partition. |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| PARTITIONS_AND_OTHER_IN_SUPER += system_other |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| # $(1): misc_info.txt |
| # #(2): optional log file |
| define check-all-partition-sizes-target |
| mkdir -p $(dir $(1)) |
| rm -f $(1) |
| $(call dump-super-image-info, $(1)) |
| $(foreach partition,$(PARTITIONS_AND_OTHER_IN_SUPER), \ |
| echo "$(partition)_image="$(call images-for-partitions,$(partition)) >> $(1);) |
| $(CHECK_PARTITION_SIZES) $(if $(2),--logfile $(2),-v) $(1) |
| endef |
| |
| check_all_partition_sizes_log := $(call intermediates-dir-for,PACKAGING,check-all-partition-sizes)/check_all_partition_sizes.log |
| droid_targets: $(check_all_partition_sizes_log) |
| $(call dist-for-goals, droid_targets, $(check_all_partition_sizes_log)) |
| |
| $(check_all_partition_sizes_log): \ |
| $(CHECK_PARTITION_SIZES) \ |
| $(call images-for-partitions,$(PARTITIONS_AND_OTHER_IN_SUPER)) |
| $(call check-all-partition-sizes-target, \ |
| $(call intermediates-dir-for,PACKAGING,check-all-partition-sizes)/misc_info.txt, \ |
| $@) |
| |
| .PHONY: check-all-partition-sizes |
| check-all-partition-sizes: $(check_all_partition_sizes_log) |
| |
| .PHONY: check-all-partition-sizes-nodeps |
| check-all-partition-sizes-nodeps: |
| $(call check-all-partition-sizes-target, \ |
| $(call intermediates-dir-for,PACKAGING,check-all-partition-sizes-nodeps)/misc_info.txt) |
| |
| endif # PRODUCT_BUILD_SUPER_PARTITION |
| |
| endif # !TARGET_BUILD_UNBUNDLED |
| |
| # ----------------------------------------------------------------- |
| # bring in the installer image generation defines if necessary |
| ifeq ($(TARGET_USE_DISKINSTALLER),true) |
| include bootable/diskinstaller/config.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # host tools needed to build dist and OTA packages |
| |
| ifeq ($(BUILD_OS),darwin) |
| build_ota_package := false |
| build_otatools_package := false |
| else |
| # Set build_ota_package, and allow opt-out below. |
| build_ota_package := true |
| ifeq ($(TARGET_SKIP_OTA_PACKAGE),true) |
| build_ota_package := false |
| endif |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_PRODUCT),sdk) |
| build_ota_package := false |
| endif |
| # A target without a kernel may be one of the following: |
| # - A generic target. In this case, the OTA package usually isn't built. |
| # PRODUCT_BUILD_GENERIC_OTA_PACKAGE may be set to true to force OTA package |
| # generation. |
| # - A real device target, with TARGET_NO_KERNEL set to true and |
| # BOARD_PREBUILT_BOOTIMAGE set. In this case, it is valid to generate |
| # an OTA package. |
| ifneq ($(PRODUCT_BUILD_GENERIC_OTA_PACKAGE),true) |
| ifneq ($(filter generic%,$(TARGET_DEVICE)),) |
| build_ota_package := false |
| endif |
| ifeq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| ifeq ($(TARGET_NO_KERNEL),true) |
| build_ota_package := false |
| endif |
| endif # INSTALLED_BOOTIMAGE_TARGET == "" |
| ifeq ($(recovery_fstab),) |
| build_ota_package := false |
| endif |
| endif # PRODUCT_BUILD_GENERIC_OTA_PACKAGE |
| |
| # Set build_otatools_package, and allow opt-out below. |
| build_otatools_package := true |
| ifeq ($(TARGET_SKIP_OTATOOLS_PACKAGE),true) |
| build_otatools_package := false |
| endif |
| endif |
| |
| ifeq ($(build_otatools_package),true) |
| |
| INTERNAL_OTATOOLS_MODULES := \ |
| aapt2 \ |
| add_img_to_target_files \ |
| apksigner \ |
| append2simg \ |
| avbtool \ |
| blk_alloc_to_base_fs \ |
| boot_signer \ |
| brillo_update_payload \ |
| brotli \ |
| bsdiff \ |
| build_image \ |
| build_super_image \ |
| build_verity_metadata \ |
| build_verity_tree \ |
| care_map_generator \ |
| check_ota_package_signature \ |
| check_target_files_signatures \ |
| check_target_files_vintf \ |
| checkvintf \ |
| delta_generator \ |
| e2fsck \ |
| e2fsdroid \ |
| fc_sort \ |
| fec \ |
| fsck.f2fs \ |
| fs_config \ |
| generate_gki_certificate \ |
| generate_verity_key \ |
| host_init_verifier \ |
| img2simg \ |
| img_from_target_files \ |
| imgdiff \ |
| libconscrypt_openjdk_jni \ |
| lpmake \ |
| lpunpack \ |
| lz4 \ |
| make_f2fs \ |
| make_f2fs_casefold \ |
| merge_target_files \ |
| minigzip \ |
| mk_combined_img \ |
| mkbootfs \ |
| mkbootimg \ |
| mke2fs \ |
| mke2fs.conf \ |
| mkfs.erofs \ |
| mkerofsimage.sh \ |
| mkf2fsuserimg.sh \ |
| mksquashfs \ |
| mksquashfsimage.sh \ |
| mkuserimg_mke2fs \ |
| ota_from_target_files \ |
| repack_bootimg \ |
| secilc \ |
| sefcontext_compile \ |
| sgdisk \ |
| shflags \ |
| sign_apex \ |
| sign_target_files_apks \ |
| sign_virt_apex \ |
| signapk \ |
| simg2img \ |
| sload_f2fs \ |
| toybox \ |
| tune2fs \ |
| unpack_bootimg \ |
| update_host_simulator \ |
| validate_target_files \ |
| verity_signer \ |
| verity_verifier \ |
| zipalign \ |
| zucchini \ |
| |
| # Additional tools to unpack and repack the apex file. |
| INTERNAL_OTATOOLS_MODULES += \ |
| apexer \ |
| apex_compression_tool \ |
| deapexer \ |
| debugfs_static \ |
| merge_zips \ |
| resize2fs \ |
| soong_zip \ |
| |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| INTERNAL_OTATOOLS_MODULES += \ |
| futility \ |
| vboot_signer |
| endif |
| |
| INTERNAL_OTATOOLS_FILES := \ |
| $(filter $(HOST_OUT)/%,$(call module-installed-files,$(INTERNAL_OTATOOLS_MODULES))) |
| |
| .PHONY: otatools |
| otatools: $(INTERNAL_OTATOOLS_FILES) |
| |
| # For each module, recursively resolve its host shared library dependencies. Then we have a full |
| # list of modules whose installed files need to be packed. |
| INTERNAL_OTATOOLS_MODULES_WITH_DEPS := \ |
| $(sort $(INTERNAL_OTATOOLS_MODULES) \ |
| $(foreach m,$(INTERNAL_OTATOOLS_MODULES),$(call get-all-shared-libs-deps,$(m)))) |
| |
| INTERNAL_OTATOOLS_PACKAGE_FILES := \ |
| $(filter $(HOST_OUT)/%,$(call module-installed-files,$(INTERNAL_OTATOOLS_MODULES_WITH_DEPS))) |
| |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find build/make/target/product/security -type f -name "*.x509.pem" -o \ |
| -name "*.pk8" -o -name verity_key)) |
| |
| ifneq (,$(wildcard device)) |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find device $(wildcard vendor) -type f -name "*.pk8" -o -name "verifiedboot*" -o \ |
| -name "*.pem" -o -name "oem*.prop" -o -name "*.avbpubkey")) |
| endif |
| ifneq (,$(wildcard external/avb)) |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find external/avb/test/data -type f -name "testkey_*.pem" -o \ |
| -name "atx_metadata.bin")) |
| endif |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find external/vboot_reference/tests/devkeys -type f)) |
| endif |
| |
| INTERNAL_OTATOOLS_RELEASETOOLS := \ |
| $(sort $(shell find build/make/tools/releasetools -name "*.pyc" -prune -o \ |
| \( -type f -o -type l \) -print)) |
| |
| BUILT_OTATOOLS_PACKAGE := $(PRODUCT_OUT)/otatools.zip |
| $(BUILT_OTATOOLS_PACKAGE): PRIVATE_ZIP_ROOT := $(call intermediates-dir-for,PACKAGING,otatools)/otatools |
| $(BUILT_OTATOOLS_PACKAGE): PRIVATE_OTATOOLS_PACKAGE_FILES := $(INTERNAL_OTATOOLS_PACKAGE_FILES) |
| $(BUILT_OTATOOLS_PACKAGE): PRIVATE_OTATOOLS_RELEASETOOLS := $(INTERNAL_OTATOOLS_RELEASETOOLS) |
| $(BUILT_OTATOOLS_PACKAGE): $(INTERNAL_OTATOOLS_PACKAGE_FILES) $(INTERNAL_OTATOOLS_RELEASETOOLS) |
| $(BUILT_OTATOOLS_PACKAGE): $(SOONG_ZIP) $(ZIP2ZIP) |
| @echo "Package OTA tools: $@" |
| rm -rf $@ $(PRIVATE_ZIP_ROOT) |
| mkdir -p $(dir $@) |
| $(call copy-files-with-structure,$(PRIVATE_OTATOOLS_PACKAGE_FILES),$(HOST_OUT)/,$(PRIVATE_ZIP_ROOT)) |
| $(call copy-files-with-structure,$(PRIVATE_OTATOOLS_RELEASETOOLS),build/make/tools/,$(PRIVATE_ZIP_ROOT)) |
| cp $(SOONG_ZIP) $(ZIP2ZIP) $(MERGE_ZIPS) $(PRIVATE_ZIP_ROOT)/bin/ |
| $(SOONG_ZIP) -o $@ -C $(PRIVATE_ZIP_ROOT) -D $(PRIVATE_ZIP_ROOT) |
| |
| .PHONY: otatools-package |
| otatools-package: $(BUILT_OTATOOLS_PACKAGE) |
| |
| endif # build_otatools_package |
| |
| # ----------------------------------------------------------------- |
| # misc_info.txt |
| |
| INSTALLED_MISC_INFO_TARGET := $(PRODUCT_OUT)/misc_info.txt |
| |
| ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),) |
| # default to common dir for device vendor |
| tool_extensions := $(TARGET_DEVICE_DIR)/../common |
| else |
| tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS) |
| endif |
| .KATI_READONLY := tool_extensions |
| |
| # $1: boot image file name |
| define misc_boot_size |
| $(subst .img,_size,$(1))=$(BOARD_KERNEL$(call to-upper,$(subst boot,,$(subst .img,,$(1))))_BOOTIMAGE_PARTITION_SIZE) |
| endef |
| |
| $(INSTALLED_MISC_INFO_TARGET): |
| rm -f $@ |
| $(call pretty,"Target misc_info.txt: $@") |
| $(hide) echo "recovery_api_version=$(RECOVERY_API_VERSION)" >> $@ |
| $(hide) echo "fstab_version=$(RECOVERY_FSTAB_VERSION)" >> $@ |
| ifdef BOARD_FLASH_BLOCK_SIZE |
| $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $@ |
| endif |
| ifneq ($(strip $(BOARD_BOOTIMAGE_PARTITION_SIZE))$(strip $(BOARD_KERNEL_BINARIES)),) |
| $(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),\ |
| echo "$(call misc_boot_size,$(notdir $(b)))" >> $@;) |
| endif |
| ifeq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| $(hide) echo "no_boot=true" >> $@ |
| else |
| echo "boot_images=$(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(notdir $(b)))" >> $@ |
| endif |
| ifneq ($(INSTALLED_INIT_BOOT_IMAGE_TARGET),) |
| $(hide) echo "init_boot=true" >> $@ |
| $(hide) echo "init_boot_size=$(BOARD_INIT_BOOT_IMAGE_PARTITION_SIZE)" >> $@ |
| endif |
| ifeq ($(BOARD_RAMDISK_USE_LZ4),true) |
| echo "lz4_ramdisks=true" >> $@ |
| endif |
| ifneq ($(INSTALLED_VENDOR_BOOTIMAGE_TARGET),) |
| echo "vendor_boot=true" >> $@ |
| echo "vendor_boot_size=$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)" >> $@ |
| endif |
| ifeq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) echo "no_recovery=true" >> $@ |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| $(hide) echo "include_recovery_dtbo=true" >> $@ |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| $(hide) echo "include_recovery_acpio=true" >> $@ |
| endif |
| ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE |
| $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $@ |
| endif |
| ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS |
| @# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used. |
| $(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $@ |
| else |
| $(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $@ |
| endif |
| $(hide) echo "tool_extensions=$(tool_extensions)" >> $@ |
| $(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $@ |
| ifdef PRODUCT_EXTRA_OTA_KEYS |
| $(hide) echo "extra_ota_keys=$(PRODUCT_EXTRA_OTA_KEYS)" >> $@ |
| endif |
| ifdef PRODUCT_EXTRA_RECOVERY_KEYS |
| $(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $@ |
| endif |
| $(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $@ |
| $(hide) echo 'recovery_mkbootimg_args=$(BOARD_RECOVERY_MKBOOTIMG_ARGS)' >> $@ |
| $(hide) echo 'mkbootimg_version_args=$(INTERNAL_MKBOOTIMG_VERSION_ARGS)' >> $@ |
| $(hide) echo 'mkbootimg_init_args=$(BOARD_MKBOOTIMG_INIT_ARGS)' >> $@ |
| ifdef BOARD_GKI_SIGNING_KEY_PATH |
| $(hide) echo 'gki_signing_key_path=$(BOARD_GKI_SIGNING_KEY_PATH)' >> $@ |
| $(hide) echo 'gki_signing_algorithm=$(BOARD_GKI_SIGNING_ALGORITHM)' >> $@ |
| $(hide) echo 'gki_signing_signature_args=$(BOARD_GKI_SIGNING_SIGNATURE_ARGS)' >> $@ |
| endif |
| $(hide) echo "multistage_support=1" >> $@ |
| $(hide) echo "blockimgdiff_versions=3,4" >> $@ |
| ifeq ($(PRODUCT_BUILD_GENERIC_OTA_PACKAGE),true) |
| $(hide) echo "build_generic_ota_package=true" >> $@ |
| endif |
| ifneq ($(OEM_THUMBPRINT_PROPERTIES),) |
| # OTA scripts are only interested in fingerprint related properties |
| $(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $@ |
| endif |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| # We need to create userdata.img with real data because the instrumented libraries are in userdata.img. |
| $(hide) echo "userdata_img_with_data=true" >> $@ |
| endif |
| ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| $(hide) echo "full_recovery_image=true" >> $@ |
| endif |
| ifdef BOARD_USES_VENDORIMAGE |
| $(hide) echo "board_uses_vendorimage=true" >> $@ |
| endif |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| ifeq ($(BUILDING_VBMETA_IMAGE),true) |
| $(hide) echo "avb_building_vbmeta_image=true" >> $@ |
| endif # BUILDING_VBMETA_IMAGE |
| $(hide) echo "avb_enable=true" >> $@ |
| $(hide) echo "avb_vbmeta_key_path=$(BOARD_AVB_KEY_PATH)" >> $@ |
| $(hide) echo "avb_vbmeta_algorithm=$(BOARD_AVB_ALGORITHM)" >> $@ |
| $(hide) echo "avb_vbmeta_args=$(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS)" >> $@ |
| $(hide) echo "avb_boot_add_hash_footer_args=$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_BOOT_KEY_PATH |
| $(hide) echo "avb_boot_key_path=$(BOARD_AVB_BOOT_KEY_PATH)" >> $@ |
| $(hide) echo "avb_boot_algorithm=$(BOARD_AVB_BOOT_ALGORITHM)" >> $@ |
| $(hide) echo "avb_boot_rollback_index_location=$(BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_BOOT_KEY_PATH |
| $(hide) echo "avb_init_boot_add_hash_footer_args=$(BOARD_AVB_INIT_BOOT_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_INIT_BOOT_KEY_PATH |
| $(hide) echo "avb_init_boot_key_path=$(BOARD_AVB_INIT_BOOT_KEY_PATH)" >> $@ |
| $(hide) echo "avb_init_boot_algorithm=$(BOARD_AVB_INIT_BOOT_ALGORITHM)" >> $@ |
| $(hide) echo "avb_init_boot_rollback_index_location=$(BOARD_AVB_INIT_BOOT_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_INIT_BOOT_KEY_PATH |
| echo "avb_vendor_boot_add_hash_footer_args=$(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_VENDOR_BOOT_KEY_PATH |
| echo "avb_vendor_boot_key_path=$(BOARD_AVB_VENDOR_BOOT_KEY_PATH)" >> $@ |
| echo "avb_vendor_boot_algorithm=$(BOARD_AVB_VENDOR_BOOT_ALGORITHM)" >> $@ |
| echo "avb_vendor_boot_rollback_index_location=$(BOARD_AVB_VENDOR_BOOT_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_VENDOR_BOOT_KEY_PATH |
| $(hide) echo "avb_recovery_add_hash_footer_args=$(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_RECOVERY_KEY_PATH |
| $(hide) echo "avb_recovery_key_path=$(BOARD_AVB_RECOVERY_KEY_PATH)" >> $@ |
| $(hide) echo "avb_recovery_algorithm=$(BOARD_AVB_RECOVERY_ALGORITHM)" >> $@ |
| $(hide) echo "avb_recovery_rollback_index_location=$(BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_RECOVERY_KEY_PATH |
| ifneq (,$(strip $(BOARD_CUSTOMIMAGES_PARTITION_LIST))) |
| $(hide) echo "avb_custom_images_partition_list=$(BOARD_CUSTOMIMAGES_PARTITION_LIST)" >> $@ |
| $(hide) $(foreach partition,$(BOARD_CUSTOMIMAGES_PARTITION_LIST), \ |
| echo "avb_$(partition)_key_path=$(BOARD_AVB_$(call to-upper,$(partition))_KEY_PATH)" >> $@; \ |
| echo "avb_$(partition)_algorithm=$(BOARD_AVB_$(call to-upper,$(partition))_ALGORITHM)" >> $@; \ |
| echo "avb_$(partition)_add_hashtree_footer_args=$(BOARD_AVB_$(call to-upper,$(partition))_ADD_HASHTREE_FOOTER_ARGS)" >> $@; \ |
| echo "avb_$(partition)_rollback_index_location=$(BOARD_AVB_$(call to-upper,$(partition))_ROLLBACK_INDEX_LOCATION)" >> $@; \ |
| echo "avb_$(partition)_partition_size=$(BOARD_AVB_$(call to-upper,$(partition))_PARTITION_SIZE)" >> $@; \ |
| echo "avb_$(partition)_image_list=$(foreach image,$(BOARD_AVB_$(call to-upper,$(partition))_IMAGE_LIST),$(notdir $(image)))" >> $@;) |
| endif # BOARD_CUSTOMIMAGES_PARTITION_LIST |
| ifneq (,$(strip $(BOARD_AVB_VBMETA_SYSTEM))) |
| $(hide) echo "avb_vbmeta_system=$(BOARD_AVB_VBMETA_SYSTEM)" >> $@ |
| $(hide) echo "avb_vbmeta_system_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $@ |
| $(hide) echo "avb_vbmeta_system_key_path=$(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH)" >> $@ |
| $(hide) echo "avb_vbmeta_system_algorithm=$(BOARD_AVB_VBMETA_SYSTEM_ALGORITHM)" >> $@ |
| $(hide) echo "avb_vbmeta_system_rollback_index_location=$(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_VBMETA_SYSTEM |
| ifneq (,$(strip $(BOARD_AVB_VBMETA_VENDOR))) |
| $(hide) echo "avb_vbmeta_vendor=$(BOARD_AVB_VBMETA_VENDOR)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_key_path=$(BOARD_AVB_VBMETA_VENDOR_KEY_PATH)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_algorithm=$(BOARD_AVB_VBMETA_VENDOR_ALGORITHM)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_rollback_index_location=$(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_VBMETA_VENDOR_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| ifdef BOARD_BPT_INPUT_FILES |
| $(hide) echo "board_bpt_enable=true" >> $@ |
| $(hide) echo "board_bpt_make_table_args=$(BOARD_BPT_MAKE_TABLE_ARGS)" >> $@ |
| $(hide) echo "board_bpt_input_files=$(BOARD_BPT_INPUT_FILES)" >> $@ |
| endif |
| ifdef BOARD_BPT_DISK_SIZE |
| $(hide) echo "board_bpt_disk_size=$(BOARD_BPT_DISK_SIZE)" >> $@ |
| endif |
| $(call generate-userimage-prop-dictionary, $@) |
| ifeq ($(AB_OTA_UPDATER),true) |
| @# Include the build type in META/misc_info.txt so the server can easily differentiate production builds. |
| $(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $@ |
| $(hide) echo "ab_update=true" >> $@ |
| endif |
| ifeq ($(TARGET_OTA_ALLOW_NON_AB),true) |
| $(hide) echo "allow_non_ab=true" >> $@ |
| endif |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| $(hide) echo "has_dtbo=true" >> $@ |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(hide) echo "dtbo_size=$(BOARD_DTBOIMG_PARTITION_SIZE)" >> $@ |
| $(hide) echo "avb_dtbo_add_hash_footer_args=$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_DTBO_KEY_PATH |
| $(hide) echo "avb_dtbo_key_path=$(BOARD_AVB_DTBO_KEY_PATH)" >> $@ |
| $(hide) echo "avb_dtbo_algorithm=$(BOARD_AVB_DTBO_ALGORITHM)" >> $@ |
| $(hide) echo "avb_dtbo_rollback_index_location=$(BOARD_AVB_DTBO_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_DTBO_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| ifeq ($(BOARD_USES_PVMFWIMAGE),true) |
| $(hide) echo "has_pvmfw=true" >> $@ |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(hide) echo "pvmfw_size=$(BOARD_PVMFWIMAGE_PARTITION_SIZE)" >> $@ |
| $(hide) echo "avb_pvmfw_add_hash_footer_args=$(BOARD_AVB_PVMFW_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_PVMFW_KEY_PATH |
| $(hide) echo "avb_pvmfw_key_path=$(BOARD_AVB_PVMFW_KEY_PATH)" >> $@ |
| $(hide) echo "avb_pvmfw_algorithm=$(BOARD_AVB_PVMFW_ALGORITHM)" >> $@ |
| $(hide) echo "avb_pvmfw_rollback_index_location=$(BOARD_AVB_PVMFW_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_PVMFW_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| endif # BOARD_USES_PVMFWIMAGE |
| $(call dump-dynamic-partitions-info,$@) |
| @# VINTF checks |
| ifeq ($(PRODUCT_ENFORCE_VINTF_MANIFEST),true) |
| $(hide) echo "vintf_enforce=true" >> $@ |
| endif |
| ifdef ODM_MANIFEST_SKUS |
| $(hide) echo "vintf_odm_manifest_skus=$(ODM_MANIFEST_SKUS)" >> $@ |
| endif |
| ifdef ODM_MANIFEST_FILES |
| $(hide) echo "vintf_include_empty_odm_sku=true" >> $@ |
| endif |
| ifdef DEVICE_MANIFEST_SKUS |
| $(hide) echo "vintf_vendor_manifest_skus=$(DEVICE_MANIFEST_SKUS)" >> $@ |
| endif |
| ifdef DEVICE_MANIFEST_FILE |
| $(hide) echo "vintf_include_empty_vendor_sku=true" >> $@ |
| endif |
| ifeq ($(BOARD_BOOTLOADER_IN_UPDATE_PACKAGE),true) |
| $(hide) echo "bootloader_in_update_package=true" >> $@ |
| endif |
| ifeq ($(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE),true) |
| $(hide) echo "exclude_kernel_from_recovery_image=true" >> $@ |
| endif |
| ifneq ($(BOARD_PARTIAL_OTA_UPDATE_PARTITIONS_LIST),) |
| $(hide) echo "partial_ota_update_partitions_list=$(BOARD_PARTIAL_OTA_UPDATE_PARTITIONS_LIST)" >> $@ |
| endif |
| ifeq ($(BUILDING_WITH_VSDK),true) |
| $(hide) echo "building_with_vsdk=true" >> $@ |
| endif |
| ifeq ($(TARGET_FLATTEN_APEX),false) |
| $(hide) echo "target_flatten_apex=false" >> $@ |
| endif |
| |
| .PHONY: misc_info |
| misc_info: $(INSTALLED_MISC_INFO_TARGET) |
| |
| droidcore-unbundled: $(INSTALLED_MISC_INFO_TARGET) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the directories that map to the target filesystem. |
| # This zip can be used to create an OTA package or filesystem image |
| # as a post-build step. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-target_files-$(FILE_NAME_TAG) |
| |
| intermediates := $(call intermediates-dir-for,PACKAGING,target_files) |
| BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip |
| $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates) |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| zip_root := $(intermediates)/$(name) |
| |
| # $(1): Directory to copy |
| # $(2): Location to copy it to |
| # The "ls -A" is to prevent "acp s/* d" from failing if s is empty. |
| define package_files-copy-root |
| if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \ |
| mkdir -p $(2) && \ |
| $(ACP) -rd $(strip $(1))/* $(2); \ |
| fi |
| endef |
| |
| built_ota_tools := |
| |
| # We can't build static executables when SANITIZE_TARGET=address |
| ifeq (,$(filter address, $(SANITIZE_TARGET))) |
| built_ota_tools += \ |
| $(call intermediates-dir-for,EXECUTABLES,updater)/updater |
| endif |
| |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools) |
| |
| tool_extension := $(wildcard $(tool_extensions)/releasetools.py) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSION := $(tool_extension) |
| |
| updaer_dep := |
| ifeq ($(AB_OTA_UPDATER),true) |
| updater_dep += system/update_engine/update_engine.conf |
| updater_dep += external/zucchini/version_info.h |
| updater_dep += $(HOST_OUT_SHARED_LIBRARIES)/liblz4.so |
| endif |
| |
| # Build OTA tools if non-A/B is allowed |
| ifeq ($(TARGET_OTA_ALLOW_NON_AB),true) |
| updater_dep += $(built_ota_tools) |
| endif |
| |
| $(BUILT_TARGET_FILES_PACKAGE): $(updater_dep) |
| |
| # If we are using recovery as boot, output recovery files to BOOT/. |
| # If we are moving recovery resources to vendor_boot, output recovery files to VENDOR_BOOT/. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := BOOT |
| else ifeq ($(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT),true) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := VENDOR_BOOT |
| else |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := RECOVERY |
| endif |
| |
| ifeq ($(AB_OTA_UPDATER),true) |
| ifdef OSRELEASED_DIRECTORY |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version |
| endif |
| |
| # Not checking in board_config.mk, since AB_OTA_PARTITIONS may be updated in Android.mk (e.g. to |
| # additionally include radio or bootloader partitions). |
| ifeq ($(AB_OTA_PARTITIONS),) |
| $(error AB_OTA_PARTITIONS must be defined when using AB_OTA_UPDATER) |
| endif |
| endif |
| |
| ifneq ($(AB_OTA_PARTITIONS),) |
| ifneq ($(AB_OTA_UPDATER),true) |
| $(error AB_OTA_UPDATER must be true when defining AB_OTA_PARTITIONS) |
| endif |
| endif |
| |
| # Run fs_config while creating the target files package |
| # $1: root directory |
| # $2: add prefix |
| define fs_config |
| (cd $(1); find . -type d | sed 's,$$,/,'; find . \! -type d) | cut -c 3- | sort | sed 's,^,$(2),' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) -R "$(2)" |
| endef |
| |
| define filter-out-missing-vendor |
| $(if $(INSTALLED_VENDORIMAGE_TARGET),$(1),$(filter-out vendor,$(1))) |
| endef |
| define filter-out-missing-vendor_dlkm |
| $(if $(INSTALLED_VENDOR_DLKMIMAGE_TARGET),$(1),$(filter-out vendor_dlkm,$(1))) |
| endef |
| define filter-out-missing-odm |
| $(if $(INSTALLED_ODMIMAGE_TARGET),$(1),$(filter-out odm,$(1))) |
| endef |
| define filter-out-missing-odm_dlkm |
| $(if $(INSTALLED_ODM_DLKMIMAGE_TARGET),$(1),$(filter-out odm_dlkm,$(1))) |
| endef |
| define filter-out-missing-system_dlkm |
| $(if $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET),$(1),$(filter-out system_dlkm,$(1))) |
| endef |
| # Filter out vendor,vendor_dlkm,odm,odm_dlkm,system_dlkm from the list for AOSP targets. |
| # $(1): list |
| define filter-out-missing-partitions |
| $(call filter-out-missing-vendor,\ |
| $(call filter-out-missing-vendor_dlkm,\ |
| $(call filter-out-missing-odm,\ |
| $(call filter-out-missing-odm_dlkm,\ |
| $(call filter-out-missing-system_dlkm,$(1)))))) |
| endef |
| |
| # Information related to dynamic partitions and virtual A/B. This information |
| # is needed for building the super image (see dump-super-image-info) and |
| # building OTA packages. |
| # $(1): file |
| define dump-dynamic-partitions-info |
| $(if $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)), \ |
| echo "use_dynamic_partitions=true" >> $(1)) |
| $(if $(filter true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)), \ |
| echo "dynamic_partition_retrofit=true" >> $(1)) |
| echo "lpmake=$(notdir $(LPMAKE))" >> $(1) |
| $(if $(filter true,$(PRODUCT_BUILD_SUPER_PARTITION)), $(if $(BOARD_SUPER_PARTITION_SIZE), \ |
| echo "build_super_partition=true" >> $(1))) |
| $(if $(BUILDING_SUPER_EMPTY_IMAGE), \ |
| echo "build_super_empty_partition=true" >> $(1)) |
| $(if $(filter true,$(BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE)), \ |
| echo "build_retrofit_dynamic_partitions_ota_package=true" >> $(1)) |
| echo "super_metadata_device=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)" >> $(1) |
| $(if $(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \ |
| echo "super_block_devices=$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)" >> $(1)) |
| $(foreach device,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \ |
| echo "super_$(device)_device_size=$(BOARD_SUPER_PARTITION_$(call to-upper,$(device))_DEVICE_SIZE)" >> $(1);) |
| $(if $(BOARD_SUPER_PARTITION_PARTITION_LIST), \ |
| echo "dynamic_partition_list=$(call filter-out-missing-partitions,$(BOARD_SUPER_PARTITION_PARTITION_LIST))" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_GROUPS), |
| echo "super_partition_groups=$(BOARD_SUPER_PARTITION_GROUPS)" >> $(1)) |
| $(foreach group,$(BOARD_SUPER_PARTITION_GROUPS), \ |
| echo "super_$(group)_group_size=$(BOARD_$(call to-upper,$(group))_SIZE)" >> $(1); \ |
| $(if $(BOARD_$(call to-upper,$(group))_PARTITION_LIST), \ |
| echo "super_$(group)_partition_list=$(call filter-out-missing-partitions,$(BOARD_$(call to-upper,$(group))_PARTITION_LIST))" >> $(1);)) |
| $(if $(filter true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)), \ |
| echo "build_non_sparse_super_partition=true" >> $(1)) |
| $(if $(filter true,$(TARGET_USERIMAGES_SPARSE_F2FS_DISABLED)), \ |
| echo "build_non_sparse_super_partition=true" >> $(1)) |
| $(if $(filter true,$(BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE)), \ |
| echo "super_image_in_update_package=true" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_SIZE), \ |
| echo "super_partition_size=$(BOARD_SUPER_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_ALIGNMENT), \ |
| echo "super_partition_alignment=$(BOARD_SUPER_PARTITION_ALIGNMENT)" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_WARN_LIMIT), \ |
| echo "super_partition_warn_limit=$(BOARD_SUPER_PARTITION_WARN_LIMIT)" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_ERROR_LIMIT), \ |
| echo "super_partition_error_limit=$(BOARD_SUPER_PARTITION_ERROR_LIMIT)" >> $(1)) |
| $(if $(filter true,$(PRODUCT_VIRTUAL_AB_OTA)), \ |
| echo "virtual_ab=true" >> $(1)) |
| $(if $(filter true,$(PRODUCT_VIRTUAL_AB_COMPRESSION)), \ |
| echo "virtual_ab_compression=true" >> $(1)) |
| # This value controls the compression algorithm used for VABC |
| # valid options are defined in system/core/fs_mgr/libsnapshot/cow_writer.cpp |
| # e.g. "none", "gz", "brotli" |
| $(if $(PRODUCT_VIRTUAL_AB_COMPRESSION_METHOD), \ |
| echo "virtual_ab_compression_method=$(PRODUCT_VIRTUAL_AB_COMPRESSION_METHOD)" >> $(1)) |
| $(if $(filter true,$(PRODUCT_VIRTUAL_AB_OTA_RETROFIT)), \ |
| echo "virtual_ab_retrofit=true" >> $(1)) |
| endef |
| |
| # By conditionally including the dependency of the target files package on the |
| # full system image deps, we speed up builds that do not build the system |
| # image. |
| ifdef BUILDING_SYSTEM_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(FULL_SYSTEMIMAGE_DEPS) |
| else |
| # releasetools may need the system build.prop even when building a |
| # system-image-less product. |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_BUILD_PROP_TARGET) |
| endif |
| |
| ifdef BUILDING_USERDATA_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_USERDATAIMAGE_FILES) |
| endif |
| |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_SYSTEMOTHERIMAGE_FILES) |
| endif |
| |
| ifdef BUILDING_VENDOR_BOOT_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_VENDOR_RAMDISK_FILES) |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_VENDOR_RAMDISK_FRAGMENT_TARGETS) |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_VENDOR_BOOTCONFIG_TARGET) |
| # The vendor ramdisk may be built from the recovery ramdisk. |
| ifeq (true,$(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT)) |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP) |
| endif |
| endif |
| |
| ifdef BUILDING_RECOVERY_IMAGE |
| # TODO(b/30414428): Can't depend on INTERNAL_RECOVERYIMAGE_FILES alone like other |
| # BUILT_TARGET_FILES_PACKAGE dependencies because currently there're cp/rsync/rm |
| # commands in build-recoveryimage-target, which would touch the files under |
| # TARGET_RECOVERY_OUT and race with packaging target-files.zip. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_BOOTIMAGE_TARGET) |
| else |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_RECOVERYIMAGE_TARGET) |
| endif |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_RECOVERYIMAGE_FILES) |
| endif |
| |
| # Conditionally depend on the image files if the image is being built so the |
| # target-files.zip rule doesn't wait on the image creation rule, or the image |
| # if it is coming from a prebuilt. |
| |
| ifdef BUILDING_VENDOR_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_VENDORIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_VENDORIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_VENDORIMAGE_TARGET) |
| endif |
| |
| ifdef BUILDING_PRODUCT_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_PRODUCTIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_PRODUCTIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_PRODUCTIMAGE_TARGET) |
| endif |
| |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_SYSTEM_EXTIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_SYSTEM_EXTIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) |
| endif |
| |
| ifneq (,$(BUILDING_BOOT_IMAGE)$(BUILDING_INIT_BOOT_IMAGE)) |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_RAMDISK_FILES) |
| endif # BUILDING_BOOT_IMAGE != "" || BUILDING_INIT_BOOT_IMAGE != "" |
| |
| ifneq (,$(INTERNAL_PREBUILT_BOOTIMAGE) $(filter true,$(BOARD_COPY_BOOT_IMAGE_TO_TARGET_FILES))) |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_BOOTIMAGE_TARGET) |
| endif |
| |
| ifdef BUILDING_ODM_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_ODMIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_ODMIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_ODMIMAGE_TARGET) |
| endif |
| |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_VENDOR_DLKMIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_VENDOR_DLKMIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) |
| endif |
| |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_ODM_DLKMIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_ODM_DLKMIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_ODM_DLKMIMAGE_TARGET) |
| endif |
| |
| ifdef BUILDING_SYSTEM_DLKM_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INTERNAL_SYSTEM_DLKMIMAGE_FILES) |
| else ifdef BOARD_PREBUILT_SYSTEM_DLKMIMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET) |
| endif |
| |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| MK_VBMETA_BOOT_KERNEL_CMDLINE_SH := device/generic/goldfish/tools/mk_vbmeta_boot_params.sh |
| $(BUILT_TARGET_FILES_PACKAGE): $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) |
| endif |
| |
| ifdef BOARD_PREBUILT_BOOTLOADER |
| $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_BOOTLOADER_MODULE) |
| droidcore-unbundled: $(INSTALLED_BOOTLOADER_MODULE) |
| endif |
| |
| # Depending on the various images guarantees that the underlying |
| # directories are up-to-date. |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| $(INSTALLED_RADIOIMAGE_TARGET) \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_CACHEIMAGE_TARGET) \ |
| $(INSTALLED_DTBOIMAGE_TARGET) \ |
| $(INSTALLED_PVMFWIMAGE_TARGET) \ |
| $(INSTALLED_CUSTOMIMAGES_TARGET) \ |
| $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ |
| $(INSTALLED_KERNEL_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_DTBIMAGE_TARGET) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(BOARD_PREBUILT_DTBOIMAGE) \ |
| $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) \ |
| $(BOARD_RECOVERY_ACPIO) \ |
| $(PRODUCT_SYSTEM_BASE_FS_PATH) \ |
| $(PRODUCT_VENDOR_BASE_FS_PATH) \ |
| $(PRODUCT_PRODUCT_BASE_FS_PATH) \ |
| $(PRODUCT_SYSTEM_EXT_BASE_FS_PATH) \ |
| $(PRODUCT_ODM_BASE_FS_PATH) \ |
| $(PRODUCT_VENDOR_DLKM_BASE_FS_PATH) \ |
| $(PRODUCT_ODM_DLKM_BASE_FS_PATH) \ |
| $(PRODUCT_SYSTEM_DLKM_BASE_FS_PATH) \ |
| $(LPMAKE) \ |
| $(SELINUX_FC) \ |
| $(INSTALLED_MISC_INFO_TARGET) \ |
| $(APKCERTS_FILE) \ |
| $(SOONG_APEX_KEYS_FILE) \ |
| $(SOONG_ZIP) \ |
| $(HOST_OUT_EXECUTABLES)/fs_config \ |
| $(ADD_IMG_TO_TARGET_FILES) \ |
| $(MAKE_RECOVERY_PATCH) \ |
| $(BUILT_KERNEL_CONFIGS_FILE) \ |
| $(BUILT_KERNEL_VERSION_FILE) \ |
| | $(ACP) |
| @echo "Package target files: $@" |
| $(hide) rm -rf $@ $@.list $(zip_root) |
| $(hide) mkdir -p $(dir $@) $(zip_root) |
| ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))$(filter true,$(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT))) |
| @# Components of the recovery image |
| $(hide) mkdir -p $(zip_root)/$(PRIVATE_RECOVERY_OUT) |
| # Exclude recovery files in the default vendor ramdisk if including a standalone |
| # recovery ramdisk in vendor_boot. |
| ifneq (true,$(BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT)) |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK) |
| endif |
| ifdef INSTALLED_KERNEL_TARGET |
| ifneq (,$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))) |
| cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/ |
| else ifneq (true,$(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)) |
| cp $(firstword $(INSTALLED_KERNEL_TARGET)) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/kernel |
| endif |
| endif |
| ifneq (truetrue,$(strip $(BUILDING_VENDOR_BOOT_IMAGE))$(strip $(BOARD_USES_RECOVERY_AS_BOOT))) |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/second |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| cp $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_dtbo |
| else |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_dtbo |
| endif |
| endif # BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| cp $(BOARD_RECOVERY_ACPIO) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_acpio |
| endif |
| ifdef INSTALLED_DTBIMAGE_TARGET |
| cp $(INSTALLED_DTBIMAGE_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/dtb |
| endif |
| ifneq (true,$(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)) |
| ifdef INTERNAL_KERNEL_CMDLINE |
| echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/cmdline |
| endif # INTERNAL_KERNEL_CMDLINE != "" |
| endif # BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE != true |
| ifdef BOARD_KERNEL_BASE |
| echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/pagesize |
| endif |
| endif # not (BUILDING_VENDOR_BOOT_IMAGE and BOARD_USES_RECOVERY_AS_BOOT) |
| endif # INSTALLED_RECOVERYIMAGE_TARGET defined or BOARD_USES_RECOVERY_AS_BOOT is true |
| @# Components of the boot image |
| $(hide) mkdir -p $(zip_root)/BOOT |
| $(hide) mkdir -p $(zip_root)/ROOT |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_ROOT_OUT),$(zip_root)/ROOT) |
| @# If we are using recovery as boot, this is already done when processing recovery. |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_RAMDISK_OUT),$(zip_root)/BOOT/RAMDISK) |
| endif |
| ifdef INSTALLED_KERNEL_TARGET |
| $(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/ |
| endif |
| ifeq (true,$(BOARD_USES_GENERIC_KERNEL_IMAGE)) |
| echo "$(GENERIC_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline |
| else ifndef INSTALLED_VENDOR_BOOTIMAGE_TARGET # && BOARD_USES_GENERIC_KERNEL_IMAGE != true |
| echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second |
| endif |
| ifdef INSTALLED_DTBIMAGE_TARGET |
| cp $(INSTALLED_DTBIMAGE_TARGET) $(zip_root)/BOOT/dtb |
| endif |
| ifdef BOARD_KERNEL_BASE |
| echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize |
| endif |
| endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET == "" && BOARD_USES_GENERIC_KERNEL_IMAGE != true |
| endif # BOARD_USES_RECOVERY_AS_BOOT not true |
| $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\ |
| mkdir -p $(zip_root)/RADIO; \ |
| cp $(t) $(zip_root)/RADIO/$(notdir $(t));) |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| mkdir -p $(zip_root)/VENDOR_BOOT |
| $(call package_files-copy-root, \ |
| $(TARGET_VENDOR_RAMDISK_OUT),$(zip_root)/VENDOR_BOOT/RAMDISK) |
| ifdef INSTALLED_DTBIMAGE_TARGET |
| cp $(INSTALLED_DTBIMAGE_TARGET) $(zip_root)/VENDOR_BOOT/dtb |
| endif |
| ifdef INTERNAL_VENDOR_BOOTCONFIG_TARGET |
| cp $(INTERNAL_VENDOR_BOOTCONFIG_TARGET) $(zip_root)/VENDOR_BOOT/vendor_bootconfig |
| endif |
| ifdef BOARD_KERNEL_BASE |
| echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/VENDOR_BOOT/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/VENDOR_BOOT/pagesize |
| endif |
| echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/VENDOR_BOOT/vendor_cmdline |
| ifdef INTERNAL_VENDOR_RAMDISK_FRAGMENTS |
| echo "$(INTERNAL_VENDOR_RAMDISK_FRAGMENTS)" > "$(zip_root)/VENDOR_BOOT/vendor_ramdisk_fragments" |
| $(foreach vendor_ramdisk_fragment,$(INTERNAL_VENDOR_RAMDISK_FRAGMENTS), \ |
| mkdir -p $(zip_root)/VENDOR_BOOT/RAMDISK_FRAGMENTS/$(vendor_ramdisk_fragment); \ |
| echo "$(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).MKBOOTIMG_ARGS)" > "$(zip_root)/VENDOR_BOOT/RAMDISK_FRAGMENTS/$(vendor_ramdisk_fragment)/mkbootimg_args"; \ |
| $(eval prebuilt_ramdisk := $(BOARD_VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).PREBUILT)) \ |
| $(if $(prebuilt_ramdisk), \ |
| cp "$(prebuilt_ramdisk)" "$(zip_root)/VENDOR_BOOT/RAMDISK_FRAGMENTS/$(vendor_ramdisk_fragment)/prebuilt_ramdisk";, \ |
| $(call package_files-copy-root, \ |
| $(VENDOR_RAMDISK_FRAGMENT.$(vendor_ramdisk_fragment).STAGING_DIR), \ |
| $(zip_root)/VENDOR_BOOT/RAMDISK_FRAGMENTS/$(vendor_ramdisk_fragment)/RAMDISK); \ |
| )) |
| endif # INTERNAL_VENDOR_RAMDISK_FRAGMENTS != "" |
| endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| ifdef BUILDING_SYSTEM_IMAGE |
| @# Contents of the system image |
| $(hide) $(call package_files-copy-root, \ |
| $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM) |
| else ifdef INSTALLED_BUILD_PROP_TARGET |
| @# Copy the system build.prop even if not building a system image |
| @# because add_img_to_target_files may need it to build other partition |
| @# images. |
| $(hide) mkdir -p "$(zip_root)/SYSTEM" |
| $(hide) cp "$(INSTALLED_BUILD_PROP_TARGET)" "$(patsubst $(TARGET_OUT)/%,$(zip_root)/SYSTEM/%,$(INSTALLED_BUILD_PROP_TARGET))" |
| endif |
| ifdef BUILDING_USERDATA_IMAGE |
| @# Contents of the data image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_DATA),$(zip_root)/DATA) |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| @# Contents of the vendor image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR) |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| @# Contents of the product image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_PRODUCT),$(zip_root)/PRODUCT) |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| @# Contents of the system_ext image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_SYSTEM_EXT),$(zip_root)/SYSTEM_EXT) |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| @# Contents of the odm image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_ODM),$(zip_root)/ODM) |
| endif |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| @# Contents of the vendor_dlkm image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_VENDOR_DLKM),$(zip_root)/VENDOR_DLKM) |
| endif |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| @# Contents of the odm_dlkm image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_ODM_DLKM),$(zip_root)/ODM_DLKM) |
| endif |
| ifdef BUILDING_SYSTEM_DLKM_IMAGE |
| @# Contents of the system_dlkm image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_SYSTEM_DLKM),$(zip_root)/SYSTEM_DLKM) |
| endif |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| @# Contents of the system_other image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_SYSTEM_OTHER),$(zip_root)/SYSTEM_OTHER) |
| endif |
| @# Extra contents of the OTA package |
| $(hide) mkdir -p $(zip_root)/OTA |
| $(hide) cp $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/ |
| ifdef BUILDING_RAMDISK_IMAGE |
| ifeq (true,$(BOARD_IMG_USE_RAMDISK)) |
| @# Contents of the ramdisk image |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_RAMDISK_TARGET) $(zip_root)/IMAGES/ |
| endif |
| endif |
| ifeq ($(TARGET_OTA_ALLOW_NON_AB),true) |
| ifneq ($(built_ota_tools),) |
| $(hide) mkdir -p $(zip_root)/OTA/bin |
| $(hide) cp $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/ |
| endif |
| endif |
| @# Files that do not end up in any images, but are necessary to |
| @# build them. |
| $(hide) mkdir -p $(zip_root)/META |
| $(hide) cp $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt |
| $(hide) cp $(SOONG_APEX_KEYS_FILE) $(zip_root)/META/apexkeys.txt |
| ifneq ($(tool_extension),) |
| $(hide) cp $(PRIVATE_TOOL_EXTENSION) $(zip_root)/META/ |
| endif |
| $(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt |
| $(hide) cp $(SELINUX_FC) $(zip_root)/META/file_contexts.bin |
| $(hide) cp $(INSTALLED_MISC_INFO_TARGET) $(zip_root)/META/misc_info.txt |
| ifneq ($(PRODUCT_SYSTEM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_SYSTEM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_SYSTEM_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_VENDOR_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_VENDOR_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_VENDOR_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_PRODUCT_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_PRODUCT_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_PRODUCT_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_SYSTEM_EXT_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_SYSTEM_EXT_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_SYSTEM_EXT_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_ODM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_ODM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_ODM_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_VENDOR_DLKM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_VENDOR_DLKM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_VENDOR_DLKM_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_ODM_DLKM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_ODM_DLKM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_ODM_DLKM_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_SYSTEM_DLKM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_SYSTEM_DLKM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_SYSTEM_DLKM_BASE_FS_PATH)) |
| endif |
| ifeq ($(TARGET_OTA_ALLOW_NON_AB),true) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| $(MAKE_RECOVERY_PATCH) $(zip_root) $(zip_root) |
| endif |
| endif |
| ifeq ($(AB_OTA_UPDATER),true) |
| @# When using the A/B updater, include the updater config files in the zip. |
| $(hide) cp $(TOPDIR)system/update_engine/update_engine.conf $(zip_root)/META/update_engine_config.txt |
| $(hide) cp $(TOPDIR)external/zucchini/version_info.h $(zip_root)/META/zucchini_config.txt |
| $(hide) cp $(HOST_OUT_SHARED_LIBRARIES)/liblz4.so $(zip_root)/META/liblz4.so |
| $(hide) for part in $(strip $(AB_OTA_PARTITIONS)); do \ |
| echo "$${part}" >> $(zip_root)/META/ab_partitions.txt; \ |
| done |
| $(hide) for conf in $(strip $(AB_OTA_POSTINSTALL_CONFIG)); do \ |
| echo "$${conf}" >> $(zip_root)/META/postinstall_config.txt; \ |
| done |
| ifdef OSRELEASED_DIRECTORY |
| $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt |
| $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt |
| $(hide) cp $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version $(zip_root)/META/system_version.txt |
| endif |
| endif |
| ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true) |
| @# If breakpad symbols have been generated, add them to the zip. |
| $(hide) cp -R $(TARGET_OUT_BREAKPAD) $(zip_root)/BREAKPAD |
| endif |
| ifdef BOARD_PREBUILT_VENDORIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_VENDORIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_PRODUCTIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_PRODUCTIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_SYSTEM_EXTIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_INIT_BOOT_IMAGE |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) cp $(INSTALLED_INIT_BOOT_IMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ |
| endif |
| |
| ifndef BOARD_PREBUILT_BOOTIMAGE |
| ifneq (,$(strip $(INTERNAL_PREBUILT_BOOTIMAGE) $(filter true,$(BOARD_COPY_BOOT_IMAGE_TO_TARGET_FILES)))) |
| ifdef INSTALLED_BOOTIMAGE_TARGET |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_BOOTIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif # INSTALLED_BOOTIMAGE_TARGET |
| endif # INTERNAL_PREBUILT_BOOTIMAGE != "" || BOARD_COPY_BOOT_IMAGE_TO_TARGET_FILES == true |
| else # BOARD_PREBUILT_BOOTIMAGE is defined |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) cp $(INSTALLED_BOOTIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ |
| endif # BOARD_PREBUILT_BOOTIMAGE |
| ifdef BOARD_PREBUILT_ODMIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_ODMIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_VENDOR_DLKMIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_ODM_DLKMIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_ODM_DLKMIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_SYSTEM_DLKMIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| ifeq ($(BOARD_USES_PVMFWIMAGE),true) |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) cp $(INSTALLED_PVMFWIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_BOOTLOADER |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_BOOTLOADER_MODULE) $(zip_root)/IMAGES/ |
| endif |
| ifneq ($(strip $(BOARD_CUSTOMIMAGES_PARTITION_LIST)),) |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) $(foreach partition,$(BOARD_CUSTOMIMAGES_PARTITION_LIST), \ |
| $(foreach image,$(BOARD_AVB_$(call to-upper,$(partition))_IMAGE_LIST),cp $(image) $(zip_root)/PREBUILT_IMAGES/;)) |
| endif # BOARD_CUSTOMIMAGES_PARTITION_LIST |
| @# The radio images in BOARD_PACK_RADIOIMAGES will be additionally copied from RADIO/ into |
| @# IMAGES/, which then will be added into <product>-img.zip. Such images must be listed in |
| @# INSTALLED_RADIOIMAGE_TARGET. |
| $(hide) $(foreach part,$(BOARD_PACK_RADIOIMAGES), \ |
| echo $(part) >> $(zip_root)/META/pack_radioimages.txt;) |
| @# Run fs_config on all the system, vendor, boot ramdisk, |
| @# and recovery ramdisk files in the zip, and save the output |
| ifdef BUILDING_SYSTEM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM,system/) > $(zip_root)/META/filesystem_config.txt |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/VENDOR,vendor/) > $(zip_root)/META/vendor_filesystem_config.txt |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/PRODUCT,product/) > $(zip_root)/META/product_filesystem_config.txt |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM_EXT,system_ext/) > $(zip_root)/META/system_ext_filesystem_config.txt |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/ODM,odm/) > $(zip_root)/META/odm_filesystem_config.txt |
| endif |
| ifdef BUILDING_VENDOR_DLKM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/VENDOR_DLKM,vendor_dlkm/) > $(zip_root)/META/vendor_dlkm_filesystem_config.txt |
| endif |
| ifdef BUILDING_ODM_DLKM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/ODM_DLKM,odm_dlkm/) > $(zip_root)/META/odm_dlkm_filesystem_config.txt |
| endif |
| ifdef BUILDING_SYSTEM_DLKM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM_DLKM,system_dlkm/) > $(zip_root)/META/system_dlkm_filesystem_config.txt |
| endif |
| @# ROOT always contains the files for the root under normal boot. |
| $(hide) $(call fs_config,$(zip_root)/ROOT,) > $(zip_root)/META/root_filesystem_config.txt |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| @# BOOT/RAMDISK exists and contains the ramdisk for recovery if using BOARD_USES_RECOVERY_AS_BOOT. |
| $(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt |
| endif |
| ifdef BUILDING_INIT_BOOT_IMAGE |
| $(hide) $(call package_files-copy-root, $(TARGET_RAMDISK_OUT),$(zip_root)/INIT_BOOT/RAMDISK) |
| $(hide) $(call fs_config,$(zip_root)/INIT_BOOT/RAMDISK,) > $(zip_root)/META/init_boot_filesystem_config.txt |
| ifdef BOARD_KERNEL_PAGESIZE |
| $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/INIT_BOOT/pagesize |
| endif # BOARD_KERNEL_PAGESIZE |
| endif # BUILDING_INIT_BOOT_IMAGE |
| ifneq ($(INSTALLED_VENDOR_BOOTIMAGE_TARGET),) |
| $(call fs_config,$(zip_root)/VENDOR_BOOT/RAMDISK,) > $(zip_root)/META/vendor_boot_filesystem_config.txt |
| endif |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| @# BOOT/RAMDISK also exists and contains the first stage ramdisk if not using BOARD_BUILD_SYSTEM_ROOT_IMAGE. |
| $(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt |
| endif |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) $(call fs_config,$(zip_root)/RECOVERY/RAMDISK,) > $(zip_root)/META/recovery_filesystem_config.txt |
| endif |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM_OTHER,system/) > $(zip_root)/META/system_other_filesystem_config.txt |
| endif |
| @# Metadata for compatibility verification. |
| ifdef BUILT_KERNEL_CONFIGS_FILE |
| $(hide) cp $(BUILT_KERNEL_CONFIGS_FILE) $(zip_root)/META/kernel_configs.txt |
| endif |
| ifdef BUILT_KERNEL_VERSION_FILE |
| $(hide) cp $(BUILT_KERNEL_VERSION_FILE) $(zip_root)/META/kernel_version.txt |
| endif |
| rm -rf $(zip_root)/META/dynamic_partitions_info.txt |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| $(call dump-dynamic-partitions-info, $(zip_root)/META/dynamic_partitions_info.txt) |
| endif |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| $(ADD_IMG_TO_TARGET_FILES) -a -v -p $(HOST_OUT) $(zip_root) |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| $(hide) AVBTOOL=$(AVBTOOL) $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(zip_root)/IMAGES/vbmeta.img \ |
| $(zip_root)/IMAGES/system.img $(zip_root)/IMAGES/VerifiedBootParams.textproto |
| endif |
| @# Zip everything up, preserving symlinks and placing META/ files first to |
| @# help early validation of the .zip file while uploading it. |
| $(hide) find $(zip_root)/META | sort >$@.list |
| $(hide) find $(zip_root) -path $(zip_root)/META -prune -o -print | sort >>$@.list |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(zip_root) -r $@.list |
| |
| .PHONY: target-files-package |
| target-files-package: $(BUILT_TARGET_FILES_PACKAGE) |
| |
| $(call dist-for-goals, target-files-package, $(BUILT_TARGET_FILES_PACKAGE)) |
| |
| # ----------------------------------------------------------------- |
| # NDK Sysroot Package |
| NDK_SYSROOT_TARGET := $(PRODUCT_OUT)/ndk_sysroot.tar.bz2 |
| $(NDK_SYSROOT_TARGET): $(SOONG_OUT_DIR)/ndk.timestamp |
| @echo Package NDK sysroot... |
| $(hide) tar cjf $@ -C $(SOONG_OUT_DIR) ndk |
| |
| ifeq ($(HOST_OS),linux) |
| $(call dist-for-goals,sdk,$(NDK_SYSROOT_TARGET)) |
| endif |
| |
| ifeq ($(build_ota_package),true) |
| # ----------------------------------------------------------------- |
| # OTA update package |
| |
| # $(1): output file |
| # $(2): additional args |
| define build-ota-package-target |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$(dir $(ZIP2ZIP)):$$PATH \ |
| $(OTA_FROM_TARGET_FILES) \ |
| --verbose \ |
| --extracted_input_target_files $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) \ |
| --path $(HOST_OUT) \ |
| $(if $(OEM_OTA_CONFIG), --oem_settings $(OEM_OTA_CONFIG)) \ |
| $(2) \ |
| $(BUILT_TARGET_FILES_PACKAGE) $(1) |
| endef |
| |
| product_name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| product_name := $(product_name)_debug |
| endif |
| name := $(product_name)-ota-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| INTERNAL_OTA_METADATA := $(PRODUCT_OUT)/ota_metadata |
| |
| $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(INTERNAL_OTA_PACKAGE_TARGET): .KATI_IMPLICIT_OUTPUTS := $(INTERNAL_OTA_METADATA) |
| $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(OTA_FROM_TARGET_FILES) $(INTERNAL_OTATOOLS_FILES) |
| @echo "Package OTA: $@" |
| $(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR) --output_metadata_path $(INTERNAL_OTA_METADATA)) |
| |
| .PHONY: otapackage |
| otapackage: $(INTERNAL_OTA_PACKAGE_TARGET) |
| |
| ifeq ($(BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE),true) |
| name := $(product_name)-ota-retrofit-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): \ |
| $(BUILT_TARGET_FILES_PACKAGE) \ |
| $(OTA_FROM_TARGET_FILES) \ |
| $(INTERNAL_OTATOOLS_FILES) |
| @echo "Package OTA (retrofit dynamic partitions): $@" |
| $(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR) --retrofit_dynamic_partitions) |
| |
| .PHONY: otardppackage |
| |
| otapackage otardppackage: $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET) |
| |
| endif # BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE |
| |
| ifneq ($(BOARD_PARTIAL_OTA_UPDATE_PARTITIONS_LIST),) |
| name := $(product_name)-partial-ota-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_PARTIAL_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| $(INTERNAL_OTA_PARTIAL_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(INTERNAL_OTA_PARTIAL_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(OTA_FROM_TARGET_FILES) $(INTERNAL_OTATOOLS_FILES) |
| @echo "Package partial OTA: $@" |
| $(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR) --partial "$(BOARD_PARTIAL_OTA_UPDATE_PARTITIONS_LIST)") |
| |
| .PHONY: partialotapackage |
| partialotapackage: $(INTERNAL_OTA_PARTIAL_PACKAGE_TARGET) |
| |
| endif # BOARD_PARTIAL_OTA_UPDATE_PARTITIONS_LIST |
| |
| endif # build_ota_package |
| |
| # ----------------------------------------------------------------- |
| # A zip of the appcompat directory containing logs |
| APPCOMPAT_ZIP := $(PRODUCT_OUT)/appcompat.zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(APPCOMPAT_ZIP): $(FULL_SYSTEMIMAGE_DEPS) \ |
| $(INTERNAL_RAMDISK_FILES) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) \ |
| $(INTERNAL_VENDORIMAGE_FILES) \ |
| $(INTERNAL_PRODUCTIMAGE_FILES) \ |
| $(INTERNAL_SYSTEM_EXTIMAGE_FILES) |
| endif |
| $(APPCOMPAT_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,appcompat)/filelist |
| $(APPCOMPAT_ZIP): $(SOONG_ZIP) |
| @echo "appcompat logs: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(PRODUCT_OUT)/appcompat $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find $(PRODUCT_OUT)/appcompat | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(PRODUCT_OUT)/appcompat -l $(PRIVATE_LIST_FILE) |
| |
| # The mac build doesn't build dex2oat, so create the zip file only if the build OS is linux. |
| ifeq ($(BUILD_OS),linux) |
| ifneq ($(DEX2OAT),) |
| dexpreopt_tools_deps := $(DEXPREOPT_GEN_DEPS) $(DEXPREOPT_GEN) $(AAPT2) |
| dexpreopt_tools_deps += $(HOST_OUT_EXECUTABLES)/dexdump |
| dexpreopt_tools_deps += $(HOST_OUT_EXECUTABLES)/oatdump |
| DEXPREOPT_TOOLS_ZIP := $(PRODUCT_OUT)/dexpreopt_tools.zip |
| $(DEXPREOPT_TOOLS_ZIP): $(dexpreopt_tools_deps) |
| $(DEXPREOPT_TOOLS_ZIP): PRIVATE_DEXPREOPT_TOOLS_DEPS := $(dexpreopt_tools_deps) |
| $(DEXPREOPT_TOOLS_ZIP): $(SOONG_ZIP) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(SOONG_ZIP) -d -o $@ -j $(addprefix -f ,$(PRIVATE_DEXPREOPT_TOOLS_DEPS)) -f $$(realpath $(DEX2OAT)) |
| endif # DEX2OAT is set |
| endif # BUILD_OS == linux |
| |
| DEXPREOPT_CONFIG_ZIP := $(PRODUCT_OUT)/dexpreopt_config.zip |
| |
| $(DEXPREOPT_CONFIG_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(DEXPREOPT_CONFIG_ZIP): $(DEX_PREOPT_CONFIG_FOR_MAKE) \ |
| $(DEX_PREOPT_SOONG_CONFIG_FOR_MAKE) \ |
| |
| endif |
| |
| $(DEXPREOPT_CONFIG_ZIP): $(SOONG_ZIP) |
| $(hide) mkdir -p $(dir $@) $(PRODUCT_OUT)/dexpreopt_config |
| |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| ifneq (,$(DEX_PREOPT_CONFIG_FOR_MAKE)) |
| $(hide) cp $(DEX_PREOPT_CONFIG_FOR_MAKE) $(PRODUCT_OUT)/dexpreopt_config |
| endif |
| ifneq (,$(DEX_PREOPT_SOONG_CONFIG_FOR_MAKE)) |
| $(hide) cp $(DEX_PREOPT_SOONG_CONFIG_FOR_MAKE) $(PRODUCT_OUT)/dexpreopt_config |
| endif |
| endif #!TARGET_BUILD_UNBUNDLED |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(PRODUCT_OUT)/dexpreopt_config -D $(PRODUCT_OUT)/dexpreopt_config |
| |
| .PHONY: dexpreopt_config_zip |
| dexpreopt_config_zip: $(DEXPREOPT_CONFIG_ZIP) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the symbols directory. Keep the full paths to make it |
| # more obvious where these files came from. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-symbols-$(FILE_NAME_TAG) |
| |
| SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(SYMBOLS_ZIP): $(INTERNAL_ALLIMAGES_FILES) $(updater_dep) |
| endif |
| $(SYMBOLS_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,symbols)/filelist |
| $(SYMBOLS_ZIP): $(SOONG_ZIP) |
| @echo "Package symbols: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(TARGET_OUT_UNSTRIPPED) $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find -L $(TARGET_OUT_UNSTRIPPED) -type f | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) --ignore_missing_files -d -o $@ -C $(OUT_DIR)/.. -l $(PRIVATE_LIST_FILE) |
| # ----------------------------------------------------------------- |
| # A zip of the coverage directory. |
| # |
| name := gcov-report-files-all |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| COVERAGE_ZIP := $(PRODUCT_OUT)/$(name).zip |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(COVERAGE_ZIP): $(INTERNAL_ALLIMAGES_FILES) |
| endif |
| $(COVERAGE_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,coverage)/filelist |
| $(COVERAGE_ZIP): $(SOONG_ZIP) |
| @echo "Package coverage: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(TARGET_OUT_COVERAGE) $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find $(TARGET_OUT_COVERAGE) | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(TARGET_OUT_COVERAGE) -l $(PRIVATE_LIST_FILE) |
| |
| #------------------------------------------------------------------ |
| # Export the LLVM profile data tool and dependencies for Clang coverage processing |
| # |
| ifeq (true,$(CLANG_COVERAGE)) |
| LLVM_PROFDATA := $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION)/bin/llvm-profdata |
| LIBCXX := $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION)/lib64/libc++.so.1 |
| PROFDATA_ZIP := $(PRODUCT_OUT)/llvm-profdata.zip |
| $(PROFDATA_ZIP): $(SOONG_ZIP) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION) -f $(LLVM_PROFDATA) -f $(LIBCXX) |
| |
| $(call dist-for-goals,droidcore-unbundled apps_only,$(PROFDATA_ZIP)) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # A zip of the Android Apps. Not keeping full path so that we don't |
| # include product names when distributing |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apps-$(FILE_NAME_TAG) |
| |
| APPS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| $(APPS_ZIP): $(FULL_SYSTEMIMAGE_DEPS) |
| @echo "Package apps: $@" |
| $(hide) rm -rf $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) apps_to_zip=`find $(TARGET_OUT_APPS) $(TARGET_OUT_APPS_PRIVILEGED) -mindepth 2 -maxdepth 3 -name "*.apk"`; \ |
| if [ -z "$$apps_to_zip" ]; then \ |
| echo "No apps to zip up. Generating empty apps archive." ; \ |
| a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \ |
| else \ |
| zip -qjX $@ $$apps_to_zip; \ |
| fi |
| |
| ifeq (true,$(EMMA_INSTRUMENT)) |
| #------------------------------------------------------------------ |
| # An archive of classes for use in generating code-coverage reports |
| # These are the uninstrumented versions of any classes that were |
| # to be instrumented. |
| # Any dependencies are set up later in build/make/core/main.mk. |
| |
| JACOCO_REPORT_CLASSES_ALL := $(PRODUCT_OUT)/jacoco-report-classes-all.jar |
| $(JACOCO_REPORT_CLASSES_ALL): PRIVATE_TARGET_JACOCO_DIR := $(call intermediates-dir-for,PACKAGING,jacoco) |
| $(JACOCO_REPORT_CLASSES_ALL): PRIVATE_HOST_JACOCO_DIR := $(call intermediates-dir-for,PACKAGING,jacoco,HOST) |
| $(JACOCO_REPORT_CLASSES_ALL): PRIVATE_TARGET_PROGUARD_USAGE_DIR := $(call intermediates-dir-for,PACKAGING,proguard_usage) |
| $(JACOCO_REPORT_CLASSES_ALL): PRIVATE_HOST_PROGUARD_USAGE_DIR := $(call intermediates-dir-for,PACKAGING,proguard_usage,HOST) |
| $(JACOCO_REPORT_CLASSES_ALL) : |
| @echo "Collecting uninstrumented classes" |
| mkdir -p $(PRIVATE_TARGET_JACOCO_DIR) $(PRIVATE_HOST_JACOCO_DIR) $(PRIVATE_TARGET_PROGUARD_USAGE_DIR) $(PRIVATE_HOST_PROGUARD_USAGE_DIR) |
| $(SOONG_ZIP) -o $@ -L 0 \ |
| -C $(PRIVATE_TARGET_JACOCO_DIR) -P out/target/common/obj -D $(PRIVATE_TARGET_JACOCO_DIR) \ |
| -C $(PRIVATE_HOST_JACOCO_DIR) -P out/target/common/obj -D $(PRIVATE_HOST_JACOCO_DIR) \ |
| -C $(PRIVATE_TARGET_PROGUARD_USAGE_DIR) -P out/target/common/obj -D $(PRIVATE_TARGET_PROGUARD_USAGE_DIR) \ |
| -C $(PRIVATE_HOST_PROGUARD_USAGE_DIR) -P out/target/common/obj -D $(PRIVATE_HOST_PROGUARD_USAGE_DIR) |
| |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(JACOCO_REPORT_CLASSES_ALL): $(INTERNAL_ALLIMAGES_FILES) |
| endif |
| endif # EMMA_INSTRUMENT=true |
| |
| |
| #------------------------------------------------------------------ |
| # A zip of Proguard obfuscation dictionary files. |
| # |
| PROGUARD_DICT_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-dict-$(FILE_NAME_TAG).zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(PROGUARD_DICT_ZIP): $(INTERNAL_ALLIMAGES_FILES) $(updater_dep) |
| endif |
| $(PROGUARD_DICT_ZIP): PRIVATE_PACKAGING_DIR := $(call intermediates-dir-for,PACKAGING,proguard_dictionary) |
| $(PROGUARD_DICT_ZIP): $(SOONG_ZIP) |
| @echo "Packaging Proguard obfuscation dictionary files." |
| mkdir -p $(dir $@) $(PRIVATE_PACKAGING_DIR) |
| $(SOONG_ZIP) --ignore_missing_files -d -o $@ -C $(PRIVATE_PACKAGING_DIR) -P out/target/common/obj -D $(PRIVATE_PACKAGING_DIR) |
| |
| #------------------------------------------------------------------ |
| # A zip of Proguard usage files. |
| # |
| PROGUARD_USAGE_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-usage-$(FILE_NAME_TAG).zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifeq (,$(TARGET_BUILD_UNBUNDLED)) |
| $(PROGUARD_USAGE_ZIP): \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_INIT_BOOT_IMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) \ |
| $(INSTALLED_ODM_DLKMIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET) \ |
| $(updater_dep) |
| endif |
| $(PROGUARD_USAGE_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,proguard_usage.zip)/filelist |
| $(PROGUARD_USAGE_ZIP): PRIVATE_PACKAGING_DIR := $(call intermediates-dir-for,PACKAGING,proguard_usage) |
| $(PROGUARD_USAGE_ZIP): $(MERGE_ZIPS) |
| @echo "Packaging Proguard usage files." |
| mkdir -p $(dir $@) $(PRIVATE_PACKAGING_DIR) $(dir $(PRIVATE_LIST_FILE)) |
| find $(PRIVATE_PACKAGING_DIR) -name proguard_usage.zip > $(PRIVATE_LIST_FILE) |
| $(MERGE_ZIPS) $@ @$(PRIVATE_LIST_FILE) |
| |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| |
| # Dump variables used by build_super_image.py (for building super.img and super_empty.img). |
| # $(1): output file |
| define dump-super-image-info |
| $(call dump-dynamic-partitions-info,$(1)) |
| $(if $(filter true,$(AB_OTA_UPDATER)), \ |
| echo "ab_update=true" >> $(1)) |
| endef |
| |
| endif # PRODUCT_USE_DYNAMIC_PARTITIONS |
| |
| # ----------------------------------------------------------------- |
| # super partition image (dist) |
| |
| ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION)) |
| |
| # BOARD_SUPER_PARTITION_SIZE must be defined to build super image. |
| ifneq ($(BOARD_SUPER_PARTITION_SIZE),) |
| |
| ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)) |
| |
| # For real devices and for dist builds, build super image from target files to an intermediate directory. |
| INTERNAL_SUPERIMAGE_DIST_TARGET := $(call intermediates-dir-for,PACKAGING,super.img)/super.img |
| $(INTERNAL_SUPERIMAGE_DIST_TARGET): extracted_input_target_files := $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) |
| $(INTERNAL_SUPERIMAGE_DIST_TARGET): $(LPMAKE) $(BUILT_TARGET_FILES_PACKAGE) $(BUILD_SUPER_IMAGE) |
| $(call pretty,"Target super fs image from target files: $@") |
| PATH=$(dir $(LPMAKE)):$$PATH \ |
| $(BUILD_SUPER_IMAGE) -v $(extracted_input_target_files) $@ |
| |
| # Skip packing it in dist package because it is in update package. |
| ifneq (true,$(BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE)) |
| $(call dist-for-goals,dist_files,$(INTERNAL_SUPERIMAGE_DIST_TARGET)) |
| endif |
| |
| .PHONY: superimage_dist |
| superimage_dist: $(INTERNAL_SUPERIMAGE_DIST_TARGET) |
| |
| endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS != "true" |
| endif # BOARD_SUPER_PARTITION_SIZE != "" |
| endif # PRODUCT_BUILD_SUPER_PARTITION == "true" |
| |
| # ----------------------------------------------------------------- |
| # super partition image for development |
| |
| ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION)) |
| ifneq ($(BOARD_SUPER_PARTITION_SIZE),) |
| ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)) |
| |
| # Build super.img by using $(INSTALLED_*IMAGE_TARGET) to $(1) |
| # $(1): built image path |
| # $(2): misc_info.txt path; its contents should match expectation of build_super_image.py |
| define build-superimage-target |
| mkdir -p $(dir $(2)) |
| rm -rf $(2) |
| $(call dump-super-image-info,$(2)) |
| $(foreach p,$(BOARD_SUPER_PARTITION_PARTITION_LIST), \ |
| echo "$(p)_image=$(INSTALLED_$(call to-upper,$(p))IMAGE_TARGET)" >> $(2);) |
| $(if $(BUILDING_SYSTEM_OTHER_IMAGE), $(if $(filter system,$(BOARD_SUPER_PARTITION_PARTITION_LIST)), \ |
| echo "system_other_image=$(INSTALLED_SYSTEMOTHERIMAGE_TARGET)" >> $(2);)) |
| mkdir -p $(dir $(1)) |
| PATH=$(dir $(LPMAKE)):$$PATH \ |
| $(BUILD_SUPER_IMAGE) -v $(2) $(1) |
| endef |
| |
| INSTALLED_SUPERIMAGE_TARGET := $(PRODUCT_OUT)/super.img |
| INSTALLED_SUPERIMAGE_DEPENDENCIES := $(LPMAKE) $(BUILD_SUPER_IMAGE) \ |
| $(foreach p, $(BOARD_SUPER_PARTITION_PARTITION_LIST), $(INSTALLED_$(call to-upper,$(p))IMAGE_TARGET)) |
| |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifneq ($(filter system,$(BOARD_SUPER_PARTITION_PARTITION_LIST)),) |
| INSTALLED_SUPERIMAGE_DEPENDENCIES += $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) |
| endif |
| endif |
| |
| # If BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT is set, super.img is built from images in the |
| # $(PRODUCT_OUT) directory, and is built to $(PRODUCT_OUT)/super.img. Also, it will |
| # be built for non-dist builds. This is useful for devices that uses super.img directly, e.g. |
| # virtual devices. |
| ifeq (true,$(BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT)) |
| $(INSTALLED_SUPERIMAGE_TARGET): $(INSTALLED_SUPERIMAGE_DEPENDENCIES) |
| $(call pretty,"Target super fs image for debug: $@") |
| $(call build-superimage-target,$(INSTALLED_SUPERIMAGE_TARGET),\ |
| $(call intermediates-dir-for,PACKAGING,superimage_debug)/misc_info.txt) |
| |
| droidcore-unbundled: $(INSTALLED_SUPERIMAGE_TARGET) |
| |
| # For devices that uses super image directly, the superimage target points to the file in $(PRODUCT_OUT). |
| .PHONY: superimage |
| superimage: $(INSTALLED_SUPERIMAGE_TARGET) |
| |
| $(call dist-for-goals,dist_files,$(INSTALLED_MISC_INFO_TARGET):super_misc_info.txt) |
| endif # BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT |
| |
| # Build $(PRODUCT_OUT)/super.img without dependencies. |
| .PHONY: superimage-nodeps supernod |
| superimage-nodeps supernod: intermediates := |
| superimage-nodeps supernod: | $(INSTALLED_SUPERIMAGE_DEPENDENCIES) |
| $(call pretty,"make $(INSTALLED_SUPERIMAGE_TARGET): ignoring dependencies") |
| $(call build-superimage-target,$(INSTALLED_SUPERIMAGE_TARGET),\ |
| $(call intermediates-dir-for,PACKAGING,superimage-nodeps)/misc_info.txt) |
| |
| endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS != "true" |
| endif # BOARD_SUPER_PARTITION_SIZE != "" |
| endif # PRODUCT_BUILD_SUPER_PARTITION == "true" |
| |
| # ----------------------------------------------------------------- |
| # super empty image |
| ifdef BUILDING_SUPER_EMPTY_IMAGE |
| |
| INSTALLED_SUPERIMAGE_EMPTY_TARGET := $(PRODUCT_OUT)/super_empty.img |
| $(INSTALLED_SUPERIMAGE_EMPTY_TARGET): intermediates := $(call intermediates-dir-for,PACKAGING,super_empty) |
| $(INSTALLED_SUPERIMAGE_EMPTY_TARGET): $(LPMAKE) $(BUILD_SUPER_IMAGE) |
| $(call pretty,"Target empty super fs image: $@") |
| mkdir -p $(intermediates) |
| rm -rf $(intermediates)/misc_info.txt |
| $(call dump-super-image-info,$(intermediates)/misc_info.txt) |
| PATH=$(dir $(LPMAKE)):$$PATH \ |
| $(BUILD_SUPER_IMAGE) -v $(intermediates)/misc_info.txt $@ |
| |
| $(call dist-for-goals,dist_files,$(INSTALLED_SUPERIMAGE_EMPTY_TARGET)) |
| |
| endif # BUILDING_SUPER_EMPTY_IMAGE |
| |
| |
| # ----------------------------------------------------------------- |
| # The update package |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-img-$(FILE_NAME_TAG) |
| |
| INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(IMG_FROM_TARGET_FILES) |
| $(call pretty,"Package: $@") |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$(dir $(ZIP2ZIP)):$$PATH \ |
| $(IMG_FROM_TARGET_FILES) \ |
| --additional IMAGES/VerifiedBootParams.textproto:VerifiedBootParams.textproto \ |
| $(BUILT_TARGET_FILES_PACKAGE) $@ |
| |
| .PHONY: updatepackage |
| updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET) |
| $(call dist-for-goals,updatepackage,$(INTERNAL_UPDATE_PACKAGE_TARGET)) |
| |
| |
| # ----------------------------------------------------------------- |
| # dalvik something |
| .PHONY: dalvikfiles |
| dalvikfiles: $(INTERNAL_DALVIK_MODULES) |
| |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| MK_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_qemu_image.sh |
| MK_COMBINE_QEMU_IMAGE := $(HOST_OUT_EXECUTABLES)/mk_combined_img |
| SGDISK_HOST := $(HOST_OUT_EXECUTABLES)/sgdisk |
| |
| ifdef INSTALLED_SYSTEMIMAGE_TARGET |
| INSTALLED_QEMU_SYSTEMIMAGE := $(PRODUCT_OUT)/system-qemu.img |
| INSTALLED_SYSTEM_QEMU_CONFIG := $(PRODUCT_OUT)/system-qemu-config.txt |
| $(INSTALLED_SYSTEM_QEMU_CONFIG): $(INSTALLED_SUPERIMAGE_TARGET) $(INSTALLED_VBMETAIMAGE_TARGET) |
| @echo "$(PRODUCT_OUT)/vbmeta.img vbmeta 1" > $@ |
| @echo "$(INSTALLED_SUPERIMAGE_TARGET) super 2" >> $@ |
| $(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_VBMETAIMAGE_TARGET) $(MK_COMBINE_QEMU_IMAGE) $(SGDISK_HOST) $(SIMG2IMG) \ |
| $(INSTALLED_SUPERIMAGE_TARGET) $(INSTALLED_SYSTEM_QEMU_CONFIG) |
| @echo Create system-qemu.img now |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); \ |
| $(MK_COMBINE_QEMU_IMAGE) -i $(INSTALLED_SYSTEM_QEMU_CONFIG) -o $@) |
| |
| systemimage: $(INSTALLED_QEMU_SYSTEMIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_SYSTEMIMAGE) |
| endif |
| ifdef INSTALLED_VENDORIMAGE_TARGET |
| INSTALLED_QEMU_VENDORIMAGE := $(PRODUCT_OUT)/vendor-qemu.img |
| $(INSTALLED_QEMU_VENDORIMAGE): $(INSTALLED_VENDORIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) |
| @echo Create vendor-qemu.img |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) $(INSTALLED_VENDORIMAGE_TARGET)) |
| |
| vendorimage: $(INSTALLED_QEMU_VENDORIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_VENDORIMAGE) |
| endif |
| |
| ifdef INSTALLED_RAMDISK_TARGET |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| ifdef INTERNAL_VENDOR_RAMDISK_TARGET |
| INSTALLED_QEMU_RAMDISKIMAGE := $(PRODUCT_OUT)/ramdisk-qemu.img |
| $(INSTALLED_QEMU_RAMDISKIMAGE): $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INSTALLED_RAMDISK_TARGET) |
| @echo Create ramdisk-qemu.img |
| (cat $(INSTALLED_RAMDISK_TARGET) $(INTERNAL_VENDOR_RAMDISK_TARGET) > $(INSTALLED_QEMU_RAMDISKIMAGE)) |
| |
| droidcore-unbundled: $(INSTALLED_QEMU_RAMDISKIMAGE) |
| endif |
| endif |
| endif |
| |
| ifdef INSTALLED_PRODUCTIMAGE_TARGET |
| INSTALLED_QEMU_PRODUCTIMAGE := $(PRODUCT_OUT)/product-qemu.img |
| $(INSTALLED_QEMU_PRODUCTIMAGE): $(INSTALLED_PRODUCTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) |
| @echo Create product-qemu.img |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) $(INSTALLED_PRODUCTIMAGE_TARGET)) |
| |
| productimage: $(INSTALLED_QEMU_PRODUCTIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_PRODUCTIMAGE) |
| endif |
| ifdef INSTALLED_SYSTEM_EXTIMAGE_TARGET |
| INSTALLED_QEMU_SYSTEM_EXTIMAGE := $(PRODUCT_OUT)/system_ext-qemu.img |
| $(INSTALLED_QEMU_SYSTEM_EXTIMAGE): $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) |
| @echo Create system_ext-qemu.img |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) $(INSTALLED_SYSTEM_EXTIMAGE_TARGET)) |
| |
| systemextimage: $(INSTALLED_QEMU_SYSTEM_EXTIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_SYSTEM_EXTIMAGE) |
| endif |
| ifdef INSTALLED_ODMIMAGE_TARGET |
| INSTALLED_QEMU_ODMIMAGE := $(PRODUCT_OUT)/odm-qemu.img |
| $(INSTALLED_QEMU_ODMIMAGE): $(INSTALLED_ODMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create odm-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) $(INSTALLED_ODMIMAGE_TARGET)) |
| |
| odmimage: $(INSTALLED_QEMU_ODMIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_ODMIMAGE) |
| endif |
| |
| ifdef INSTALLED_VENDOR_DLKMIMAGE_TARGET |
| INSTALLED_QEMU_VENDOR_DLKMIMAGE := $(PRODUCT_OUT)/vendor_dlkm-qemu.img |
| $(INSTALLED_QEMU_VENDOR_DLKMIMAGE): $(INSTALLED_VENDOR_DLKMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create vendor_dlkm-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) $(INSTALLED_VENDOR_DLKMIMAGE_TARGET)) |
| |
| vendor_dlkmimage: $(INSTALLED_QEMU_VENDOR_DLKMIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_VENDOR_DLKMIMAGE) |
| endif |
| |
| ifdef INSTALLED_ODM_DLKMIMAGE_TARGET |
| INSTALLED_QEMU_ODM_DLKMIMAGE := $(PRODUCT_OUT)/odm_dlkm-qemu.img |
| $(INSTALLED_QEMU_ODM_DLKMIMAGE): $(INSTALLED_ODM_DLKMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create odm_dlkm-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) $(INSTALLED_ODM_DLKMIMAGE_TARGET)) |
| |
| odm_dlkmimage: $(INSTALLED_QEMU_ODM_DLKMIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_ODM_DLKMIMAGE) |
| endif |
| |
| ifdef INSTALLED_SYSTEM_DLKMIMAGE_TARGET |
| INSTALLED_QEMU_SYSTEM_DLKMIMAGE := $(PRODUCT_OUT)/system_dlkm-qemu.img |
| $(INSTALLED_QEMU_SYSTEM_DLKMIMAGE): $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create system_dlkm-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) $(INSTALLED_SYSTEM_DLKMIMAGE_TARGET)) |
| |
| system_dlkmimage: $(INSTALLED_QEMU_SYSTEM_DLKMIMAGE) |
| droidcore-unbundled: $(INSTALLED_QEMU_SYSTEM_DLKMIMAGE) |
| endif |
| |
| QEMU_VERIFIED_BOOT_PARAMS := $(PRODUCT_OUT)/VerifiedBootParams.textproto |
| $(QEMU_VERIFIED_BOOT_PARAMS): $(INSTALLED_VBMETAIMAGE_TARGET) $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(AVBTOOL) |
| @echo Creating $@ |
| (export AVBTOOL=$(AVBTOOL); $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(INSTALLED_VBMETAIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) $(QEMU_VERIFIED_BOOT_PARAMS)) |
| |
| systemimage: $(QEMU_VERIFIED_BOOT_PARAMS) |
| droidcore-unbundled: $(QEMU_VERIFIED_BOOT_PARAMS) |
| |
| endif |
| # ----------------------------------------------------------------- |
| # The emulator package |
| ifeq ($(BUILD_EMULATOR),true) |
| INTERNAL_EMULATOR_PACKAGE_FILES += \ |
| $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \ |
| prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) |
| |
| name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG) |
| |
| INTERNAL_EMULATOR_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| @echo "Package: $@" |
| $(hide) zip -qjX $@ $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| |
| endif |
| |
| |
| # ----------------------------------------------------------------- |
| # The SDK |
| |
| ifneq ($(filter sdk,$(MAKECMDGOALS)),) |
| |
| # The SDK includes host-specific components, so it belongs under HOST_OUT. |
| sdk_dir := $(HOST_OUT)/sdk/$(TARGET_PRODUCT) |
| |
| # Build a name that looks like: |
| # |
| # linux-x86 --> android-sdk_12345_linux-x86 |
| # darwin-x86 --> android-sdk_12345_mac-x86 |
| # windows-x86 --> android-sdk_12345_windows |
| # |
| ifneq ($(HOST_OS),linux) |
| $(error Building the monolithic SDK is only supported on Linux) |
| endif |
| sdk_name := android-sdk_$(FILE_NAME_TAG) |
| INTERNAL_SDK_HOST_OS_NAME := linux-$(SDK_HOST_ARCH) |
| sdk_name := $(sdk_name)_$(INTERNAL_SDK_HOST_OS_NAME) |
| |
| sdk_dep_file := $(sdk_dir)/sdk_deps.mk |
| |
| ATREE_FILES := |
| -include $(sdk_dep_file) |
| |
| # if we don't have a real list, then use "everything" |
| ifeq ($(strip $(ATREE_FILES)),) |
| ATREE_FILES := \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(ALL_DOCS) \ |
| $(ALL_SDK_FILES) |
| endif |
| |
| atree_dir := development/build |
| |
| |
| sdk_atree_files := $(atree_dir)/sdk.exclude.atree |
| |
| # development/build/sdk-android-<abi>.atree is used to differentiate |
| # between architecture models (e.g. ARMv5TE versus ARMv7) when copying |
| # files like the kernel image. We use TARGET_CPU_ABI because we don't |
| # have a better way to distinguish between CPU models. |
| ifneq (,$(strip $(wildcard $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree))) |
| sdk_atree_files += $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree |
| endif |
| |
| ifneq ($(PRODUCT_SDK_ATREE_FILES),) |
| sdk_atree_files += $(PRODUCT_SDK_ATREE_FILES) |
| else |
| sdk_atree_files += $(atree_dir)/sdk.atree |
| endif |
| |
| include $(BUILD_SYSTEM)/sdk_font.mk |
| |
| deps := \ |
| $(target_notice_file_txt) \ |
| $(tools_notice_file_txt) \ |
| $(OUT_DOCS)/offline-sdk-timestamp \ |
| $(SDK_METADATA_FILES) \ |
| $(SYMBOLS_ZIP) \ |
| $(COVERAGE_ZIP) \ |
| $(APPCOMPAT_ZIP) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_QEMU_SYSTEMIMAGE) \ |
| $(INSTALLED_QEMU_RAMDISKIMAGE) \ |
| $(INSTALLED_QEMU_VENDORIMAGE) \ |
| $(QEMU_VERIFIED_BOOT_PARAMS) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SDK_BUILD_PROP_TARGET) \ |
| $(INSTALLED_BUILD_PROP_TARGET) \ |
| $(ATREE_FILES) \ |
| $(sdk_atree_files) \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(HOST_OUT_EXECUTABLES)/line_endings \ |
| $(SDK_FONT_DEPS) |
| |
| INTERNAL_SDK_TARGET := $(sdk_dir)/$(sdk_name).zip |
| $(INTERNAL_SDK_TARGET): PRIVATE_NAME := $(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DIR := $(sdk_dir)/$(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DEP_FILE := $(sdk_dep_file) |
| $(INTERNAL_SDK_TARGET): PRIVATE_INPUT_FILES := $(sdk_atree_files) |
| |
| # Set SDK_GNU_ERROR to non-empty to fail when a GNU target is built. |
| # |
| #SDK_GNU_ERROR := true |
| |
| $(INTERNAL_SDK_TARGET): $(deps) |
| @echo "Package SDK: $@" |
| $(hide) rm -rf $(PRIVATE_DIR) $@ |
| $(hide) for f in $(strip $(target_gnu_MODULES)); do \ |
| if [ -f $$f ]; then \ |
| echo SDK: $(if $(SDK_GNU_ERROR),ERROR:,warning:) \ |
| including GNU target $$f >&2; \ |
| FAIL=$(SDK_GNU_ERROR); \ |
| fi; \ |
| done; \ |
| if [ $$FAIL ]; then exit 1; fi |
| $(hide) echo $(notdir $(SDK_FONT_DEPS)) | tr " " "\n" > $(SDK_FONT_TEMP)/fontsInSdk.txt |
| $(hide) ( \ |
| ATREE_STRIP="$(HOST_STRIP) -x" \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(addprefix -f ,$(PRIVATE_INPUT_FILES)) \ |
| -m $(PRIVATE_DEP_FILE) \ |
| -I . \ |
| -I $(PRODUCT_OUT) \ |
| -I $(HOST_OUT) \ |
| -I $(TARGET_COMMON_OUT_ROOT) \ |
| -v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \ |
| -v "OUT_DIR=$(OUT_DIR)" \ |
| -v "HOST_OUT=$(HOST_OUT)" \ |
| -v "TARGET_ARCH=$(TARGET_ARCH)" \ |
| -v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \ |
| -v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \ |
| -v "FONT_OUT=$(SDK_FONT_TEMP)" \ |
| -o $(PRIVATE_DIR) && \ |
| cp -f $(target_notice_file_txt) \ |
| $(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \ |
| HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \ |
| development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \ |
| chmod -R ug+rwX $(PRIVATE_DIR) && \ |
| cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \ |
| ) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 ) |
| |
| MAIN_SDK_DIR := $(sdk_dir) |
| MAIN_SDK_ZIP := $(INTERNAL_SDK_TARGET) |
| |
| endif # sdk in MAKECMDGOALS |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| INTERNAL_FINDBUGS_XML_TARGET := $(PRODUCT_OUT)/findbugs.xml |
| INTERNAL_FINDBUGS_HTML_TARGET := $(PRODUCT_OUT)/findbugs.html |
| $(INTERNAL_FINDBUGS_XML_TARGET): $(ALL_FINDBUGS_FILES) |
| @echo UnionBugs: $@ |
| $(hide) $(FINDBUGS_DIR)/unionBugs $(ALL_FINDBUGS_FILES) \ |
| > $@ |
| $(INTERNAL_FINDBUGS_HTML_TARGET): $(INTERNAL_FINDBUGS_XML_TARGET) |
| @echo ConvertXmlToText: $@ |
| $(hide) $(FINDBUGS_DIR)/convertXmlToText -html:fancy.xsl \ |
| $(INTERNAL_FINDBUGS_XML_TARGET) > $@ |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| |
| # ----------------------------------------------------------------- |
| # These are some additional build tasks that need to be run. |
| ifneq ($(dont_bother),true) |
| include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk)) |
| -include $(sort $(wildcard vendor/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard product/*/build/tasks/*.mk)) |
| # Also the project-specific tasks |
| -include $(sort $(wildcard vendor/*/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard product/*/*/build/tasks/*.mk)) |
| # Also add test specifc tasks |
| include $(sort $(wildcard platform_testing/build/tasks/*.mk)) |
| include $(sort $(wildcard test/vts/tools/build/tasks/*.mk)) |
| endif |
| |
| include $(BUILD_SYSTEM)/product-graph.mk |
| |
| # ----------------------------------------------------------------- |
| # Create SDK repository packages. Must be done after tasks/* since |
| # we need the addon rules defined. |
| ifneq ($(sdk_repo_goal),) |
| include $(TOPDIR)development/build/tools/sdk_repo.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Soong generates the list of all shared libraries that are depended on by fuzz |
| # targets. It saves this list as a source:destination pair to |
| # FUZZ_TARGET_SHARED_DEPS_INSTALL_PAIRS, where the source is the path to the |
| # build of the unstripped shared library, and the destination is the |
| # /data/fuzz/$ARCH/lib (for device) or /fuzz/$ARCH/lib (for host) directory |
| # where fuzz target shared libraries are to be "reinstalled". The |
| # copy-many-files below generates the rules to copy the unstripped shared |
| # libraries to the device or host "reinstallation" directory. These rules are |
| # depended on by each module in soong_cc_prebuilt.mk, where the module will have |
| # a dependency on each shared library that it needs to be "reinstalled". |
| FUZZ_SHARED_DEPS := $(call copy-many-files,$(strip $(FUZZ_TARGET_SHARED_DEPS_INSTALL_PAIRS))) |
| |
| # ----------------------------------------------------------------- |
| # The rule to build all fuzz targets for C++ and Rust, and package them. |
| # Note: The packages are created in Soong, and in a perfect world, |
| # we'd be able to create the phony rule there. But, if we want to |
| # have dist goals for the fuzz target, we need to have the PHONY |
| # target defined in make. MakeVarsContext.DistForGoal doesn't take |
| # into account that a PHONY rule create by Soong won't be available |
| # during make, and such will fail with `writing to readonly |
| # directory`, because kati will see 'haiku' as being a file, not a |
| # phony target. |
| .PHONY: haiku |
| haiku: $(SOONG_FUZZ_PACKAGING_ARCH_MODULES) $(ALL_FUZZ_TARGETS) |
| $(call dist-for-goals,haiku,$(SOONG_FUZZ_PACKAGING_ARCH_MODULES)) |
| |
| .PHONY: haiku-java |
| haiku-java: $(SOONG_JAVA_FUZZ_PACKAGING_ARCH_MODULES) $(ALL_JAVA_FUZZ_TARGETS) |
| $(call dist-for-goals,haiku-java,$(SOONG_JAVA_FUZZ_PACKAGING_ARCH_MODULES)) |
| |
| .PHONY: haiku-rust |
| haiku-rust: $(SOONG_RUST_FUZZ_PACKAGING_ARCH_MODULES) $(ALL_RUST_FUZZ_TARGETS) |
| $(call dist-for-goals,haiku-rust,$(SOONG_RUST_FUZZ_PACKAGING_ARCH_MODULES)) |