| # Copyright (C) 2020 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import collections |
| import logging |
| import os |
| import zipfile |
| |
| import common |
| import edify_generator |
| import verity_utils |
| from check_target_files_vintf import CheckVintfIfTrebleEnabled, HasPartition |
| from common import OPTIONS |
| from ota_utils import UNZIP_PATTERN, FinalizeMetadata, GetPackageMetadata, PropertyFiles |
| import subprocess |
| |
| logger = logging.getLogger(__name__) |
| |
| |
| def GetBlockDifferences(target_zip, source_zip, target_info, source_info, |
| device_specific): |
| """Returns a ordered dict of block differences with partition name as key.""" |
| |
| def GetIncrementalBlockDifferenceForPartition(name): |
| if not HasPartition(source_zip, name): |
| raise RuntimeError( |
| "can't generate incremental that adds {}".format(name)) |
| |
| partition_src = common.GetUserImage(name, OPTIONS.source_tmp, source_zip, |
| info_dict=source_info, |
| allow_shared_blocks=allow_shared_blocks) |
| |
| partition_tgt = common.GetUserImage(name, OPTIONS.target_tmp, target_zip, |
| info_dict=target_info, |
| allow_shared_blocks=allow_shared_blocks) |
| |
| # Check the first block of the source system partition for remount R/W only |
| # if the filesystem is ext4. |
| partition_source_info = source_info["fstab"]["/" + name] |
| check_first_block = partition_source_info.fs_type == "ext4" |
| # Disable imgdiff because it relies on zlib to produce stable output |
| # across different versions, which is often not the case. |
| return common.BlockDifference(name, partition_tgt, partition_src, |
| check_first_block, |
| version=blockimgdiff_version, |
| disable_imgdiff=True) |
| |
| if source_zip: |
| # See notes in common.GetUserImage() |
| allow_shared_blocks = (source_info.get('ext4_share_dup_blocks') == "true" or |
| target_info.get('ext4_share_dup_blocks') == "true") |
| blockimgdiff_version = max( |
| int(i) for i in target_info.get( |
| "blockimgdiff_versions", "1").split(",")) |
| assert blockimgdiff_version >= 3 |
| |
| block_diff_dict = collections.OrderedDict() |
| partition_names = ["system", "vendor", "product", "odm", "system_ext", |
| "vendor_dlkm", "odm_dlkm", "system_dlkm"] |
| for partition in partition_names: |
| if not HasPartition(target_zip, partition): |
| continue |
| # Full OTA update. |
| if not source_zip: |
| tgt = common.GetUserImage(partition, OPTIONS.input_tmp, target_zip, |
| info_dict=target_info, |
| reset_file_map=True) |
| block_diff_dict[partition] = common.BlockDifference(partition, tgt, |
| src=None) |
| # Incremental OTA update. |
| else: |
| block_diff_dict[partition] = GetIncrementalBlockDifferenceForPartition( |
| partition) |
| assert "system" in block_diff_dict |
| |
| # Get the block diffs from the device specific script. If there is a |
| # duplicate block diff for a partition, ignore the diff in the generic script |
| # and use the one in the device specific script instead. |
| if source_zip: |
| device_specific_diffs = device_specific.IncrementalOTA_GetBlockDifferences() |
| function_name = "IncrementalOTA_GetBlockDifferences" |
| else: |
| device_specific_diffs = device_specific.FullOTA_GetBlockDifferences() |
| function_name = "FullOTA_GetBlockDifferences" |
| |
| if device_specific_diffs: |
| assert all(isinstance(diff, common.BlockDifference) |
| for diff in device_specific_diffs), \ |
| "{} is not returning a list of BlockDifference objects".format( |
| function_name) |
| for diff in device_specific_diffs: |
| if diff.partition in block_diff_dict: |
| logger.warning("Duplicate block difference found. Device specific block" |
| " diff for partition '%s' overrides the one in generic" |
| " script.", diff.partition) |
| block_diff_dict[diff.partition] = diff |
| |
| return block_diff_dict |
| |
| |
| def WriteFullOTAPackage(input_zip, output_file): |
| target_info = common.BuildInfo(OPTIONS.info_dict, OPTIONS.oem_dicts) |
| |
| # We don't know what version it will be installed on top of. We expect the API |
| # just won't change very often. Similarly for fstab, it might have changed in |
| # the target build. |
| target_api_version = target_info["recovery_api_version"] |
| script = edify_generator.EdifyGenerator(target_api_version, target_info) |
| |
| if target_info.oem_props and not OPTIONS.oem_no_mount: |
| target_info.WriteMountOemScript(script) |
| |
| metadata = GetPackageMetadata(target_info) |
| |
| if not OPTIONS.no_signing: |
| staging_file = common.MakeTempFile(suffix='.zip') |
| else: |
| staging_file = output_file |
| |
| output_zip = zipfile.ZipFile( |
| staging_file, "w", compression=zipfile.ZIP_DEFLATED) |
| |
| device_specific = common.DeviceSpecificParams( |
| input_zip=input_zip, |
| input_version=target_api_version, |
| output_zip=output_zip, |
| script=script, |
| input_tmp=OPTIONS.input_tmp, |
| metadata=metadata, |
| info_dict=OPTIONS.info_dict) |
| |
| assert HasRecoveryPatch(input_zip, info_dict=OPTIONS.info_dict) |
| |
| # Assertions (e.g. downgrade check, device properties check). |
| #ts = target_info.GetBuildProp("ro.build.date.utc") |
| #ts_text = target_info.GetBuildProp("ro.build.date") |
| #script.AssertOlderBuild(ts, ts_text) |
| |
| target_info.WriteDeviceAssertions(script, OPTIONS.oem_no_mount) |
| device_specific.FullOTA_Assertions() |
| |
| block_diff_dict = GetBlockDifferences(target_zip=input_zip, source_zip=None, |
| target_info=target_info, |
| source_info=None, |
| device_specific=device_specific) |
| |
| # Two-step package strategy (in chronological order, which is *not* |
| # the order in which the generated script has things): |
| # |
| # if stage is not "2/3" or "3/3": |
| # write recovery image to boot partition |
| # set stage to "2/3" |
| # reboot to boot partition and restart recovery |
| # else if stage is "2/3": |
| # write recovery image to recovery partition |
| # set stage to "3/3" |
| # reboot to recovery partition and restart recovery |
| # else: |
| # (stage must be "3/3") |
| # set stage to "" |
| # do normal full package installation: |
| # wipe and install system, boot image, etc. |
| # set up system to update recovery partition on first boot |
| # complete script normally |
| # (allow recovery to mark itself finished and reboot) |
| |
| recovery_img = common.GetBootableImage("recovery.img", "recovery.img", |
| OPTIONS.input_tmp, "RECOVERY") |
| if OPTIONS.two_step: |
| if not target_info.get("multistage_support"): |
| assert False, "two-step packages not supported by this build" |
| fs = target_info["fstab"]["/misc"] |
| assert fs.fs_type.upper() == "EMMC", \ |
| "two-step packages only supported on devices with EMMC /misc partitions" |
| bcb_dev = {"bcb_dev": fs.device} |
| common.ZipWriteStr(output_zip, "recovery.img", recovery_img.data) |
| script.AppendExtra(""" |
| if get_stage("%(bcb_dev)s") == "2/3" then |
| """ % bcb_dev) |
| |
| # Stage 2/3: Write recovery image to /recovery (currently running /boot). |
| script.Comment("Stage 2/3") |
| script.WriteRawImage("/recovery", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "3/3"); |
| reboot_now("%(bcb_dev)s", "recovery"); |
| else if get_stage("%(bcb_dev)s") == "3/3" then |
| """ % bcb_dev) |
| |
| # Stage 3/3: Make changes. |
| script.Comment("Stage 3/3") |
| |
| # Dump fingerprints |
| script.Print("Target: {}".format(target_info.fingerprint)) |
| |
| device_specific.FullOTA_InstallBegin() |
| |
| # All other partitions as well as the data wipe use 10% of the progress, and |
| # the update of the system partition takes the remaining progress. |
| system_progress = 0.9 - (len(block_diff_dict) - 1) * 0.1 |
| if OPTIONS.wipe_user_data: |
| system_progress -= 0.1 |
| progress_dict = {partition: 0.1 for partition in block_diff_dict} |
| progress_dict["system"] = system_progress |
| |
| if target_info.get('use_dynamic_partitions') == "true": |
| # Use empty source_info_dict to indicate that all partitions / groups must |
| # be re-added. |
| dynamic_partitions_diff = common.DynamicPartitionsDifference( |
| info_dict=OPTIONS.info_dict, |
| block_diffs=block_diff_dict.values(), |
| progress_dict=progress_dict, |
| build_without_vendor=(not HasPartition(input_zip, "vendor"))) |
| dynamic_partitions_diff.WriteScript(script, output_zip, |
| write_verify_script=OPTIONS.verify) |
| else: |
| for block_diff in block_diff_dict.values(): |
| block_diff.WriteScript(script, output_zip, |
| progress=progress_dict.get(block_diff.partition), |
| write_verify_script=OPTIONS.verify) |
| |
| CheckVintfIfTrebleEnabled(OPTIONS.input_tmp, target_info) |
| |
| boot_img = common.GetBootableImage( |
| "boot.img", "boot.img", OPTIONS.input_tmp, "BOOT") |
| common.CheckSize(boot_img.data, "boot.img", target_info) |
| common.ZipWriteStr(output_zip, "boot.img", boot_img.data) |
| |
| device_specific.FullOTA_PostValidate() |
| |
| script.WriteRawImage("/boot", "boot.img") |
| |
| script.ShowProgress(0.1, 10) |
| device_specific.FullOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| script.UnmountAll() |
| |
| if OPTIONS.wipe_user_data: |
| script.ShowProgress(0.1, 10) |
| script.FormatPartition("/data") |
| |
| if OPTIONS.two_step: |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", ""); |
| """ % bcb_dev) |
| script.AppendExtra("else\n") |
| |
| # Stage 1/3: Nothing to verify for full OTA. Write recovery image to /boot. |
| script.Comment("Stage 1/3") |
| _WriteRecoveryImageToBoot(script, output_zip) |
| |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "2/3"); |
| reboot_now("%(bcb_dev)s", ""); |
| endif; |
| endif; |
| """ % bcb_dev) |
| |
| script.SetProgress(1) |
| script.AddToZip(input_zip, output_zip, input_path=OPTIONS.updater_binary) |
| metadata.required_cache = script.required_cache |
| |
| # We haven't written the metadata entry, which will be done in |
| # FinalizeMetadata. |
| common.ZipClose(output_zip) |
| |
| needed_property_files = ( |
| NonAbOtaPropertyFiles(), |
| ) |
| FinalizeMetadata(metadata, staging_file, output_file, |
| needed_property_files, package_key=OPTIONS.package_key) |
| |
| |
| def WriteBlockIncrementalOTAPackage(target_zip, source_zip, output_file): |
| target_info = common.BuildInfo(OPTIONS.target_info_dict, OPTIONS.oem_dicts) |
| source_info = common.BuildInfo(OPTIONS.source_info_dict, OPTIONS.oem_dicts) |
| |
| target_api_version = target_info["recovery_api_version"] |
| source_api_version = source_info["recovery_api_version"] |
| if source_api_version == 0: |
| logger.warning( |
| "Generating edify script for a source that can't install it.") |
| |
| script = edify_generator.EdifyGenerator( |
| source_api_version, target_info, fstab=source_info["fstab"]) |
| |
| if target_info.oem_props or source_info.oem_props: |
| if not OPTIONS.oem_no_mount: |
| source_info.WriteMountOemScript(script) |
| |
| metadata = GetPackageMetadata(target_info, source_info) |
| |
| if not OPTIONS.no_signing: |
| staging_file = common.MakeTempFile(suffix='.zip') |
| else: |
| staging_file = output_file |
| |
| output_zip = zipfile.ZipFile( |
| staging_file, "w", compression=zipfile.ZIP_DEFLATED) |
| |
| device_specific = common.DeviceSpecificParams( |
| source_zip=source_zip, |
| source_version=source_api_version, |
| source_tmp=OPTIONS.source_tmp, |
| target_zip=target_zip, |
| target_version=target_api_version, |
| target_tmp=OPTIONS.target_tmp, |
| output_zip=output_zip, |
| script=script, |
| metadata=metadata, |
| info_dict=source_info) |
| |
| source_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.source_tmp, "BOOT", source_info) |
| target_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.target_tmp, "BOOT", target_info) |
| updating_boot = (not OPTIONS.two_step and |
| (source_boot.data != target_boot.data)) |
| |
| target_recovery = common.GetBootableImage( |
| "/tmp/recovery.img", "recovery.img", OPTIONS.target_tmp, "RECOVERY") |
| |
| block_diff_dict = GetBlockDifferences(target_zip=target_zip, |
| source_zip=source_zip, |
| target_info=target_info, |
| source_info=source_info, |
| device_specific=device_specific) |
| |
| CheckVintfIfTrebleEnabled(OPTIONS.target_tmp, target_info) |
| |
| # Assertions (e.g. device properties check). |
| target_info.WriteDeviceAssertions(script, OPTIONS.oem_no_mount) |
| device_specific.IncrementalOTA_Assertions() |
| |
| # Two-step incremental package strategy (in chronological order, |
| # which is *not* the order in which the generated script has |
| # things): |
| # |
| # if stage is not "2/3" or "3/3": |
| # do verification on current system |
| # write recovery image to boot partition |
| # set stage to "2/3" |
| # reboot to boot partition and restart recovery |
| # else if stage is "2/3": |
| # write recovery image to recovery partition |
| # set stage to "3/3" |
| # reboot to recovery partition and restart recovery |
| # else: |
| # (stage must be "3/3") |
| # perform update: |
| # patch system files, etc. |
| # force full install of new boot image |
| # set up system to update recovery partition on first boot |
| # complete script normally |
| # (allow recovery to mark itself finished and reboot) |
| |
| if OPTIONS.two_step: |
| if not source_info.get("multistage_support"): |
| assert False, "two-step packages not supported by this build" |
| fs = source_info["fstab"]["/misc"] |
| assert fs.fs_type.upper() == "EMMC", \ |
| "two-step packages only supported on devices with EMMC /misc partitions" |
| bcb_dev = {"bcb_dev": fs.device} |
| common.ZipWriteStr(output_zip, "recovery.img", target_recovery.data) |
| script.AppendExtra(""" |
| if get_stage("%(bcb_dev)s") == "2/3" then |
| """ % bcb_dev) |
| |
| # Stage 2/3: Write recovery image to /recovery (currently running /boot). |
| script.Comment("Stage 2/3") |
| script.AppendExtra("sleep(20);\n") |
| script.WriteRawImage("/recovery", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "3/3"); |
| reboot_now("%(bcb_dev)s", "recovery"); |
| else if get_stage("%(bcb_dev)s") != "3/3" then |
| """ % bcb_dev) |
| |
| # Stage 1/3: (a) Verify the current system. |
| script.Comment("Stage 1/3") |
| |
| # Dump fingerprints |
| script.Print("Source: {}".format(source_info.fingerprint)) |
| script.Print("Target: {}".format(target_info.fingerprint)) |
| |
| script.Print("Verifying current system...") |
| |
| device_specific.IncrementalOTA_VerifyBegin() |
| |
| WriteFingerprintAssertion(script, target_info, source_info) |
| |
| # Check the required cache size (i.e. stashed blocks). |
| required_cache_sizes = [diff.required_cache for diff in |
| block_diff_dict.values()] |
| if updating_boot: |
| boot_type, boot_device_expr = common.GetTypeAndDeviceExpr("/boot", |
| source_info) |
| d = common.Difference(target_boot, source_boot, "bsdiff") |
| _, _, d = d.ComputePatch() |
| if d is None: |
| include_full_boot = True |
| common.ZipWriteStr(output_zip, "boot.img", target_boot.data) |
| else: |
| include_full_boot = False |
| |
| logger.info( |
| "boot target: %d source: %d diff: %d", target_boot.size, |
| source_boot.size, len(d)) |
| |
| common.ZipWriteStr(output_zip, "boot.img.p", d) |
| |
| target_expr = 'concat("{}:",{},":{}:{}")'.format( |
| boot_type, boot_device_expr, target_boot.size, target_boot.sha1) |
| source_expr = 'concat("{}:",{},":{}:{}")'.format( |
| boot_type, boot_device_expr, source_boot.size, source_boot.sha1) |
| script.PatchPartitionExprCheck(target_expr, source_expr) |
| |
| required_cache_sizes.append(target_boot.size) |
| |
| if required_cache_sizes: |
| script.CacheFreeSpaceCheck(max(required_cache_sizes)) |
| |
| # Verify the existing partitions. |
| for diff in block_diff_dict.values(): |
| diff.WriteVerifyScript(script, touched_blocks_only=True) |
| |
| device_specific.IncrementalOTA_VerifyEnd() |
| |
| if OPTIONS.two_step: |
| # Stage 1/3: (b) Write recovery image to /boot. |
| _WriteRecoveryImageToBoot(script, output_zip) |
| |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "2/3"); |
| reboot_now("%(bcb_dev)s", ""); |
| else |
| """ % bcb_dev) |
| |
| # Stage 3/3: Make changes. |
| script.Comment("Stage 3/3") |
| |
| script.Comment("---- start making changes here ----") |
| |
| device_specific.IncrementalOTA_InstallBegin() |
| |
| progress_dict = {partition: 0.1 for partition in block_diff_dict} |
| progress_dict["system"] = 1 - len(block_diff_dict) * 0.1 |
| |
| if OPTIONS.source_info_dict.get("use_dynamic_partitions") == "true": |
| if OPTIONS.target_info_dict.get("use_dynamic_partitions") != "true": |
| raise RuntimeError( |
| "can't generate incremental that disables dynamic partitions") |
| dynamic_partitions_diff = common.DynamicPartitionsDifference( |
| info_dict=OPTIONS.target_info_dict, |
| source_info_dict=OPTIONS.source_info_dict, |
| block_diffs=block_diff_dict.values(), |
| progress_dict=progress_dict) |
| dynamic_partitions_diff.WriteScript( |
| script, output_zip, write_verify_script=OPTIONS.verify) |
| else: |
| for block_diff in block_diff_dict.values(): |
| block_diff.WriteScript(script, output_zip, |
| progress=progress_dict.get(block_diff.partition), |
| write_verify_script=OPTIONS.verify) |
| |
| if OPTIONS.two_step: |
| common.ZipWriteStr(output_zip, "boot.img", target_boot.data) |
| script.WriteRawImage("/boot", "boot.img") |
| logger.info("writing full boot image (forced by two-step mode)") |
| |
| if not OPTIONS.two_step: |
| if updating_boot: |
| if include_full_boot: |
| logger.info("boot image changed; including full.") |
| script.Print("Installing boot image...") |
| script.WriteRawImage("/boot", "boot.img") |
| else: |
| # Produce the boot image by applying a patch to the current |
| # contents of the boot partition, and write it back to the |
| # partition. |
| logger.info("boot image changed; including patch.") |
| script.Print("Patching boot image...") |
| script.ShowProgress(0.1, 10) |
| target_expr = 'concat("{}:",{},":{}:{}")'.format( |
| boot_type, boot_device_expr, target_boot.size, target_boot.sha1) |
| source_expr = 'concat("{}:",{},":{}:{}")'.format( |
| boot_type, boot_device_expr, source_boot.size, source_boot.sha1) |
| script.PatchPartitionExpr(target_expr, source_expr, '"boot.img.p"') |
| else: |
| logger.info("boot image unchanged; skipping.") |
| |
| # Do device-specific installation (eg, write radio image). |
| device_specific.IncrementalOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| if OPTIONS.wipe_user_data: |
| script.Print("Erasing user data...") |
| script.FormatPartition("/data") |
| |
| if OPTIONS.two_step: |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", ""); |
| endif; |
| endif; |
| """ % bcb_dev) |
| |
| script.SetProgress(1) |
| # For downgrade OTAs, we prefer to use the update-binary in the source |
| # build that is actually newer than the one in the target build. |
| if OPTIONS.downgrade: |
| script.AddToZip(source_zip, output_zip, input_path=OPTIONS.updater_binary) |
| else: |
| script.AddToZip(target_zip, output_zip, input_path=OPTIONS.updater_binary) |
| metadata.required_cache = script.required_cache |
| |
| # We haven't written the metadata entry yet, which will be handled in |
| # FinalizeMetadata(). |
| common.ZipClose(output_zip) |
| |
| # Sign the generated zip package unless no_signing is specified. |
| needed_property_files = ( |
| NonAbOtaPropertyFiles(), |
| ) |
| FinalizeMetadata(metadata, staging_file, output_file, |
| needed_property_files, package_key=OPTIONS.package_key) |
| |
| |
| def GenerateNonAbOtaPackage(target_file, output_file, source_file=None): |
| """Generates a non-A/B OTA package.""" |
| # Check the loaded info dicts first. |
| if OPTIONS.info_dict.get("no_recovery") == "true": |
| raise common.ExternalError( |
| "--- target build has specified no recovery ---") |
| |
| # Non-A/B OTAs rely on /cache partition to store temporary files. |
| cache_size = OPTIONS.info_dict.get("cache_size") |
| if cache_size is None: |
| logger.warning("--- can't determine the cache partition size ---") |
| OPTIONS.cache_size = cache_size |
| |
| if OPTIONS.extra_script is not None: |
| with open(OPTIONS.extra_script) as fp: |
| OPTIONS.extra_script = fp.read() |
| |
| if OPTIONS.extracted_input is not None: |
| OPTIONS.input_tmp = OPTIONS.extracted_input |
| else: |
| if not os.path.isdir(target_file): |
| logger.info("unzipping target target-files...") |
| OPTIONS.input_tmp = common.UnzipTemp(target_file, UNZIP_PATTERN) |
| else: |
| OPTIONS.input_tmp = target_file |
| tmpfile = common.MakeTempFile(suffix=".zip") |
| os.unlink(tmpfile) |
| common.RunAndCheckOutput( |
| ["zip", tmpfile, "-r", ".", "-0"], cwd=target_file) |
| assert zipfile.is_zipfile(tmpfile) |
| target_file = tmpfile |
| |
| OPTIONS.target_tmp = OPTIONS.input_tmp |
| |
| # If the caller explicitly specified the device-specific extensions path via |
| # -s / --device_specific, use that. Otherwise, use META/releasetools.py if it |
| # is present in the target target_files. Otherwise, take the path of the file |
| # from 'tool_extensions' in the info dict and look for that in the local |
| # filesystem, relative to the current directory. |
| if OPTIONS.device_specific is None: |
| from_input = os.path.join(OPTIONS.input_tmp, "META", "releasetools.py") |
| if os.path.exists(from_input): |
| logger.info("(using device-specific extensions from target_files)") |
| OPTIONS.device_specific = from_input |
| else: |
| OPTIONS.device_specific = OPTIONS.info_dict.get("tool_extensions") |
| |
| if OPTIONS.device_specific is not None: |
| OPTIONS.device_specific = os.path.abspath(OPTIONS.device_specific) |
| |
| # Generate a full OTA. |
| if source_file is None: |
| with zipfile.ZipFile(target_file) as input_zip: |
| WriteFullOTAPackage( |
| input_zip, |
| output_file) |
| |
| # Generate an incremental OTA. |
| else: |
| logger.info("unzipping source target-files...") |
| OPTIONS.source_tmp = common.UnzipTemp( |
| OPTIONS.incremental_source, UNZIP_PATTERN) |
| with zipfile.ZipFile(target_file) as input_zip, \ |
| zipfile.ZipFile(source_file) as source_zip: |
| WriteBlockIncrementalOTAPackage( |
| input_zip, |
| source_zip, |
| output_file) |
| |
| |
| def WriteFingerprintAssertion(script, target_info, source_info): |
| source_oem_props = source_info.oem_props |
| target_oem_props = target_info.oem_props |
| |
| if source_oem_props is None and target_oem_props is None: |
| script.AssertSomeFingerprint( |
| source_info.fingerprint, target_info.fingerprint) |
| elif source_oem_props is not None and target_oem_props is not None: |
| script.AssertSomeThumbprint( |
| target_info.GetBuildProp("ro.build.thumbprint"), |
| source_info.GetBuildProp("ro.build.thumbprint")) |
| elif source_oem_props is None and target_oem_props is not None: |
| script.AssertFingerprintOrThumbprint( |
| source_info.fingerprint, |
| target_info.GetBuildProp("ro.build.thumbprint")) |
| else: |
| script.AssertFingerprintOrThumbprint( |
| target_info.fingerprint, |
| source_info.GetBuildProp("ro.build.thumbprint")) |
| |
| |
| class NonAbOtaPropertyFiles(PropertyFiles): |
| """The property-files for non-A/B OTA. |
| |
| For non-A/B OTA, the property-files string contains the info for METADATA |
| entry, with which a system updater can be fetched the package metadata prior |
| to downloading the entire package. |
| """ |
| |
| def __init__(self): |
| super(NonAbOtaPropertyFiles, self).__init__() |
| self.name = 'ota-property-files' |
| |
| |
| def _WriteRecoveryImageToBoot(script, output_zip): |
| """Find and write recovery image to /boot in two-step OTA. |
| |
| In two-step OTAs, we write recovery image to /boot as the first step so that |
| we can reboot to there and install a new recovery image to /recovery. |
| A special "recovery-two-step.img" will be preferred, which encodes the correct |
| path of "/boot". Otherwise the device may show "device is corrupt" message |
| when booting into /boot. |
| |
| Fall back to using the regular recovery.img if the two-step recovery image |
| doesn't exist. Note that rebuilding the special image at this point may be |
| infeasible, because we don't have the desired boot signer and keys when |
| calling ota_from_target_files.py. |
| """ |
| |
| recovery_two_step_img_name = "recovery-two-step.img" |
| recovery_two_step_img_path = os.path.join( |
| OPTIONS.input_tmp, "OTA", recovery_two_step_img_name) |
| if os.path.exists(recovery_two_step_img_path): |
| common.ZipWrite( |
| output_zip, |
| recovery_two_step_img_path, |
| arcname=recovery_two_step_img_name) |
| logger.info( |
| "two-step package: using %s in stage 1/3", recovery_two_step_img_name) |
| script.WriteRawImage("/boot", recovery_two_step_img_name) |
| else: |
| logger.info("two-step package: using recovery.img in stage 1/3") |
| # The "recovery.img" entry has been written into package earlier. |
| script.WriteRawImage("/boot", "recovery.img") |
| |
| |
| def HasRecoveryPatch(target_files_zip, info_dict): |
| board_uses_vendorimage = info_dict.get("board_uses_vendorimage") == "true" |
| board_builds_vendorimage = info_dict.get("board_builds_vendorimage") == "true" |
| target_files_dir = None |
| |
| if board_builds_vendorimage: |
| target_files_dir = "VENDOR" |
| elif not board_uses_vendorimage: |
| target_files_dir = "SYSTEM/vendor" |
| |
| if target_files_dir is None: |
| return True |
| |
| patch = "%s/recovery-from-boot.p" % target_files_dir |
| img = "%s/etc/recovery.img" % target_files_dir |
| |
| namelist = target_files_zip.namelist() |
| return patch in namelist or img in namelist |