## @file | |
# This is NT32 FDF file with UEFI HII features enabled | |
# | |
# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR> | |
# | |
# This program and the accompanying materials | |
# are licensed and made available under the terms and conditions of the BSD License | |
# which accompanies this distribution. The full text of the license may be found at | |
# http://opensource.org/licenses/bsd-license.php | |
# | |
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
# | |
################################################################################ | |
# | |
# FD Section | |
# The [FD] Section is made up of the definition statements and a | |
# description of what goes into the Flash Device Image. Each FD section | |
# defines one flash "device" image. A flash device image may be one of | |
# the following: Removable media bootable image (like a boot floppy | |
# image,) an Option ROM image (that would be "flashed" into an add-in | |
# card,) a System "Flash" image (that would be burned into a system's | |
# flash) or an Update ("Capsule") image that will be used to update and | |
# existing system flash. | |
# | |
################################################################################ | |
[FD.Nt32] | |
BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress #The base address of the FLASH Device. | |
Size = 0x002a0000 #The size in bytes of the FLASH Device | |
ErasePolarity = 1 | |
BlockSize = 0x10000 | |
NumBlocks = 0x2a | |
################################################################################ | |
# | |
# Following are lists of FD Region layout which correspond to the locations of different | |
# images within the flash device. | |
# | |
# Regions must be defined in ascending order and may not overlap. | |
# | |
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by | |
# the pipe "|" character, followed by the size of the region, also in hex with the leading | |
# "0x" characters. Like: | |
# Offset|Size | |
# PcdOffsetCName|PcdSizeCName | |
# RegionType <FV, DATA, or FILE> | |
# | |
################################################################################ | |
0x00000000|0x00280000 | |
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoverySize | |
FV = FvRecovery | |
0x00280000|0x0000c000 | |
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize | |
#NV_VARIABLE_STORE | |
DATA = { | |
## This is the EFI_FIRMWARE_VOLUME_HEADER | |
# ZeroVector [] | |
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
# FileSystemGuid: gEfiSystemNvDataFvGuid = | |
# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} | |
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, | |
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, | |
# FvLength: 0x20000 | |
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, | |
#Signature "_FVH" #Attributes | |
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00, | |
#HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision | |
0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02, | |
#Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block | |
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, | |
#Blockmap[1]: End | |
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
## This is the VARIABLE_STORE_HEADER | |
!if $(SECURE_BOOT_ENABLE) == TRUE | |
#Signature: gEfiAuthenticatedVariableGuid = | |
# { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }} | |
0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43, | |
0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92, | |
!else | |
#Signature: gEfiVariableGuid = | |
# { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} | |
0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41, | |
0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d, | |
!endif | |
#Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xBFB8 | |
# This can speed up the Variable Dispatch a bit. | |
0xB8, 0xBF, 0x00, 0x00, | |
#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32 | |
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
} | |
0x0028c000|0x00002000 | |
#NV_EVENT_LOG | |
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize | |
0x0028e000|0x00002000 | |
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize | |
#NV_FTW_WORKING | |
DATA = { | |
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid = | |
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }} | |
0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49, | |
0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95, | |
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved | |
0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF, | |
# WriteQueueSize: UINT64 | |
0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
} | |
0x00290000|0x00010000 | |
#NV_FTW_SPARE | |
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize | |
################################################################################ | |
# | |
# FV Section | |
# | |
# [FV] section is used to define what components or modules are placed within a flash | |
# device file. This section also defines order the components and modules are positioned | |
# within the image. The [FV] section consists of define statements, set statements and | |
# module statements. | |
# | |
################################################################################ | |
[FV.FvRecovery] | |
FvAlignment = 16 #FV alignment and FV attributes setting. | |
ERASE_POLARITY = 1 | |
MEMORY_MAPPED = TRUE | |
STICKY_WRITE = TRUE | |
LOCK_CAP = TRUE | |
LOCK_STATUS = TRUE | |
WRITE_DISABLED_CAP = TRUE | |
WRITE_ENABLED_CAP = TRUE | |
WRITE_STATUS = TRUE | |
WRITE_LOCK_CAP = TRUE | |
WRITE_LOCK_STATUS = TRUE | |
READ_DISABLED_CAP = TRUE | |
READ_ENABLED_CAP = TRUE | |
READ_STATUS = TRUE | |
READ_LOCK_CAP = TRUE | |
READ_LOCK_STATUS = TRUE | |
FvNameGuid = 6D99E806-3D38-42c2-A095-5F4300BFD7DC | |
################################################################################ | |
# | |
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image. | |
# Parsing tools will scan the INF file to determine the type of component or module. | |
# The component or module type is used to reference the standard rules | |
# defined elsewhere in the FDF file. | |
# | |
# The format for INF statements is: | |
# INF $(PathAndInfFileName) | |
# | |
################################################################################ | |
## | |
# PEI Phase modules | |
## | |
## | |
# PEI Apriori file example, more PEIM module added later. | |
## | |
APRIORI PEI { | |
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf | |
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf | |
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf | |
INF Nt32Pkg/WinNtOemHookStatusCodeHandlerPei/WinNtOemHookStatusCodeHandlerPei.inf | |
} | |
APRIORI DXE { | |
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf | |
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf | |
INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf | |
} | |
INF MdeModulePkg/Core/Pei/PeiMain.inf | |
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf | |
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf | |
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf | |
INF Nt32Pkg/WinNtOemHookStatusCodeHandlerPei/WinNtOemHookStatusCodeHandlerPei.inf | |
INF Nt32Pkg/BootModePei/BootModePei.inf | |
INF Nt32Pkg/StallPei/StallPei.inf | |
INF Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf | |
INF Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf | |
INF Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf | |
INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf | |
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf | |
INF Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf | |
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | |
## | |
# DXE Phase modules | |
## | |
INF MdeModulePkg/Core/Dxe/DxeMain.inf | |
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf | |
INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf | |
INF Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf | |
INF Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf | |
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf | |
INF Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf | |
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf | |
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf | |
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf | |
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf | |
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf | |
INF Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf | |
INF Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf | |
INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf | |
INF MdeModulePkg/Application/UiApp/UiApp.inf | |
INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf | |
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf | |
INF Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf | |
INF Nt32Pkg/TimerDxe/TimerDxe.inf | |
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf | |
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf | |
INF Nt32Pkg/WinNtOemHookStatusCodeHandlerDxe/WinNtOemHookStatusCodeHandlerDxe.inf | |
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf | |
!if $(SECURE_BOOT_ENABLE) == TRUE | |
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf | |
!endif | |
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf | |
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf | |
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf | |
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf | |
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf | |
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf | |
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf | |
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf | |
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf | |
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf | |
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf | |
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf | |
INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf | |
INF RuleOverride = TIANOCOMPRESSED MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf | |
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf | |
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf | |
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | |
INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf | |
INF Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf | |
INF Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf | |
INF Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf | |
INF Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf | |
INF Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf | |
INF MdeModulePkg/Universal/PlatformDriOverrideDxe/PlatformDriOverrideDxe.inf | |
INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf | |
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf | |
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf | |
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf | |
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf | |
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf | |
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf | |
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf | |
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf | |
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf | |
INF Nt32Pkg/SnpNt32Dxe/SnpNt32Dxe.inf | |
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf | |
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf | |
INF NetworkPkg/HttpBootDxe/HttpBootDxe.inf | |
INF NetworkPkg/DnsDxe/DnsDxe.inf | |
INF NetworkPkg/HttpDxe/HttpDxe.inf | |
INF NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe.inf | |
################################################################################ | |
# | |
# FILE statements are provided so that a platform integrator can include | |
# complete EFI FFS files, as well as a method for constructing FFS files | |
# using curly "{}" brace scoping. The following three FILEs are | |
# for binary shell, binary fat and logo module. | |
# | |
################################################################################ | |
!ifndef $(USE_OLD_SHELL) | |
INF ShellBinPkg/UefiShell/UefiShell.inf | |
!else | |
INF EdkShellBinPkg/FullShell/FullShell.inf | |
!endif | |
INF FatBinPkg/EnhancedFatDxe/Fat.inf | |
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) { | |
SECTION RAW = MdeModulePkg/Logo/Logo.bmp | |
} | |
################################################################################ | |
# | |
# Rules are use with the [FV] section's module INF type to define | |
# how an FFS file is created for a given INF file. The following Rule are the default | |
# rules for the different module type. User can add the customized rules to define the | |
# content of the FFS file. | |
# | |
################################################################################ | |
############################################################################ | |
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # | |
############################################################################ | |
# | |
#[Rule.Common.DXE_DRIVER] | |
# FILE DRIVER = $(NAMED_GUID) { | |
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
# COMPRESS PI_STD { | |
# GUIDED { | |
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
# UI STRING="$(MODULE_NAME)" Optional | |
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
# } | |
# } | |
# } | |
# | |
############################################################################ | |
[Rule.Common.PEI_CORE] | |
FILE PEI_CORE = $(NAMED_GUID) { | |
PE32 PE32 Align=4K $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING ="$(MODULE_NAME)" Optional | |
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.PEIM] | |
FILE PEIM = $(NAMED_GUID) { | |
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
PE32 PE32 Align=4K $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.DXE_CORE] | |
FILE DXE_CORE = $(NAMED_GUID) { | |
COMPRESS PI_STD { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
[Rule.Common.UEFI_DRIVER] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
COMPRESS PI_STD { | |
GUIDED { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
} | |
[Rule.Common.UEFI_DRIVER.TIANOCOMPRESSED] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
[Rule.Common.DXE_DRIVER] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
COMPRESS PI_STD { | |
GUIDED { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
} | |
[Rule.Common.DXE_RUNTIME_DRIVER] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
COMPRESS PI_STD { | |
GUIDED { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
} | |
[Rule.Common.UEFI_APPLICATION] | |
FILE APPLICATION = $(NAMED_GUID) { | |
COMPRESS PI_STD { | |
GUIDED { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
} | |
[Rule.Common.UEFI_APPLICATION.BINARY] | |
FILE APPLICATION = $(NAMED_GUID) { | |
COMPRESS PI_STD { | |
GUIDED { | |
PE32 PE32 |.efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
} | |
[Rule.Common.UEFI_DRIVER.BINARY] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional |.depex | |
COMPRESS PI_STD { | |
GUIDED { | |
PE32 PE32 |.efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
} | |
} |