| ## @file MdeModulePkg.dec | |
| # This package provides the modules that conform to UEFI/PI Industry standards. | |
| # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes) | |
| # and libraries instances, which are used for those modules. | |
| # | |
| # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR> | |
| # This program and the accompanying materials are licensed and made available under | |
| # the terms and conditions of the BSD License that accompanies this distribution. | |
| # The full text of the license may be found at | |
| # http://opensource.org/licenses/bsd-license.php. | |
| # | |
| # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| # | |
| ## | |
| [Defines] | |
| DEC_SPECIFICATION = 0x00010005 | |
| PACKAGE_NAME = MdeModulePkg | |
| PACKAGE_UNI_FILE = MdeModulePkg.uni | |
| PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288 | |
| PACKAGE_VERSION = 0.96 | |
| [Includes] | |
| Include | |
| [LibraryClasses] | |
| ## @libraryclass IpIo layer upon EFI IP4 Protocol. | |
| # This library is only intended to be used by UEFI network stack modules. | |
| IpIoLib|Include/Library/IpIoLib.h | |
| ## @libraryclass Basic function for UEFI network stack. | |
| # This library is only intended to be used by UEFI network stack modules. | |
| NetLib|Include/Library/NetLib.h | |
| ## @libraryclass The helper routines to access UDP service. | |
| # This library is only intended to be used by UEFI network stack modules. | |
| UdpIoLib|Include/Library/UdpIoLib.h | |
| ## @libraryclass The helper routines to access TCP service. | |
| # This library is only intended to be used by UEFI network stack modules. | |
| TcpIoLib|Include/Library/TcpIoLib.h | |
| ## @libraryclass The helper routines to access HTTP service. | |
| # This library is only intended to be used by UEFI network stack modules. | |
| HttpLib|Include/Library/HttpLib.h | |
| ## @libraryclass Defines a set of methods to reset whole system. | |
| ResetSystemLib|Include/Library/ResetSystemLib.h | |
| ## @libraryclass Defines a set of methods related do S3 mode. | |
| # This library class is no longer used and modules using this library should | |
| # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification. | |
| S3Lib|Include/Library/S3Lib.h | |
| ## @libraryclass Defines a set of methods related recovery mode. | |
| # This library class is no longer used and modules using this library should | |
| # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification. | |
| RecoveryLib|Include/Library/RecoveryLib.h | |
| ## @libraryclass Provides HII related functions. | |
| HiiLib|Include/Library/HiiLib.h | |
| ## @libraryclass Defines a set of interfaces on how to process capusle image update. | |
| CapsuleLib|Include/Library/CapsuleLib.h | |
| ## @libraryclass Library for Deferred Procedure Calls. | |
| DpcLib|Include/Library/DpcLib.h | |
| ## @libraryclass Provides global variables that are pointers | |
| # to the UEFI HII related protocols. | |
| # | |
| UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h | |
| ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement. | |
| # | |
| SecurityManagementLib|Include/Library/SecurityManagementLib.h | |
| ## @libraryclass OEM status code libary is used to report status code to OEM device. | |
| # | |
| OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h | |
| ## @libraryclass Debug Agent is used to provide soft debug capability. | |
| # | |
| DebugAgentLib|Include/Library/DebugAgentLib.h | |
| ## @libraryclass Provide platform specific hooks. | |
| # | |
| PlatformHookLib|Include/Library/PlatformHookLib.h | |
| ## @libraryclass Provide platform specific hooks for SMM core. | |
| # | |
| SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h | |
| ## @libraryclass Provide capability to maintain the data integrity cross S3 phase. | |
| # | |
| LockBoxLib|Include/Library/LockBoxLib.h | |
| ## @libraryclass Provide the CPU exception handler. | |
| # | |
| CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h | |
| ## @libraryclass Provides platform specific display interface. | |
| # | |
| CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h | |
| ## @libraryclass Provides sorting functions | |
| SortLib|Include/Library/SortLib.h | |
| ## @libraryclass Provides core boot manager functions | |
| UefiBootManagerLib|Include/Library/UefiBootManagerLib.h | |
| ## @libraryclass Provides core boot manager functions | |
| PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h | |
| ## @libraryclass Provides common interfaces about TPM measurement for other modules. | |
| # | |
| TpmMeasurementLib|Include/Library/TpmMeasurementLib.h | |
| ## @libraryclass Provides authenticated variable services. | |
| # | |
| AuthVariableLib|Include/Library/AuthVariableLib.h | |
| ## @libraryclass Provides variable check services and database management. | |
| # | |
| VarCheckLib|Include/Library/VarCheckLib.h | |
| ## @libraryclass Provides services to get variable error flag and do platform variable cleanup. | |
| # | |
| PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h | |
| [Guids] | |
| ## MdeModule package token space guid | |
| # Include/Guid/MdeModulePkgTokenSpace.h | |
| gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }} | |
| ## Hob guid for Pcd DataBase | |
| # Include/Guid/PcdDataBaseHobGuid.h | |
| gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }} | |
| ## Guid for PCD DataBase signature. | |
| # Include/Guid/PcdDataBaseSignatureGuid.h | |
| gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }} | |
| ## Guid for EDKII implementation GUIDed opcodes | |
| # Include/Guid/MdeModuleHii.h | |
| gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }} | |
| ## Guid for Framework vfr GUIDed opcodes. | |
| # Include/Guid/MdeModuleHii.h | |
| gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }} | |
| ## Guid to specify the System Non Volatile FV | |
| # Include/Guid/SystemNvDataGuid.h | |
| gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} | |
| ## GUID used as the signature of FTW working block header. | |
| # Include/Guid/SystemNvDataGuid.h | |
| gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }} | |
| ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done. | |
| # Include/Guid/FaultTolerantWrite.h | |
| gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }} | |
| ## Guid specify the device is the console out device. | |
| # Include/Guid/ConsoleOutDevice.h | |
| gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} | |
| ## Guid specify the device is the console in device. | |
| # Include/Guid/ConsoleInDevice.h | |
| gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} | |
| ## Hob and Variable guid specify the platform memory type information. | |
| # Include/Guid/MemoryTypeInformation.h | |
| gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }} | |
| ## Capsule update hob and variable guid | |
| # Include/Guid/CapsuleVendor.h | |
| gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }} | |
| ## Guid specifiy the device is the StdErr device. | |
| # Include/Guid/StandardErrorDevice.h | |
| gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} | |
| ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table. | |
| # Include/Guid/VariableFormat.h | |
| gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} | |
| ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table. | |
| # Include/Guid/AuthenticatedVariableFormat.h | |
| gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } } | |
| # Include/Guid/VariableIndexTable.h | |
| gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }} | |
| ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready. | |
| # Include/Guid/SmmVariableCommon.h | |
| gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }} | |
| ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID | |
| # Include/Guid/Performance.h | |
| gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } } | |
| gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } } | |
| gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } } | |
| gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } } | |
| ## Guid is defined for CRC32 encapsulation scheme. | |
| # Include/Guid/Crc32GuidedSectionExtraction.h | |
| gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } } | |
| ## Include/Guid/StatusCodeCallbackGuid.h | |
| gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}} | |
| ## GUID identifies status code records HOB that originate from the PEI status code | |
| # Include/Guid/MemoryStatusCodeRecord.h | |
| gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }} | |
| ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI | |
| # Include/Guid/StatusCodeDataTypeDebug.h | |
| gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }} | |
| ## A configuration Table Guid for Load module at fixed address | |
| # Include/Guid/LoadModuleAtFixedAddress.h | |
| gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } } | |
| ## GUID used to store the global debug mask value into an EFI Variable | |
| # Include/Guid/DebugMask.h | |
| gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} } | |
| ## Event for the DXE Core to signal idle events | |
| # Include/Guid/EventIdle.h | |
| gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } } | |
| ## Include/Guid/RecoveryDevice.h | |
| gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }} | |
| ## Include/Guid/RecoveryDevice.h | |
| gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }} | |
| ## Include/Guid/RecoveryDevice.h | |
| gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }} | |
| ## Include/Guid/RecoveryDevice.h | |
| gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }} | |
| ## Include/Guid/SmmLockBox.h | |
| gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }} | |
| ## Include/Guid/AcpiS3Context.h | |
| gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }} | |
| ## Include/Guid/AcpiS3Context.h | |
| gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }} | |
| ## Include/Guid/BootScriptExecutorVariable.h | |
| gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }} | |
| gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }} | |
| ## Include/Guid/UsbKeyBoardLayout.h | |
| gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }} | |
| gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }} | |
| ## Include/Guid/HiiResourceSampleHii.h | |
| gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }} | |
| ## Include/Guid/DriverSampleHii.h | |
| gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }} | |
| gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }} | |
| gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }} | |
| ## Include/Guid/PlatDriOverrideHii.h | |
| gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }} | |
| ## Include/Guid/Ip4Config2Hii.h | |
| gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }} | |
| ## Include/Guid/VlanConfigHii.h | |
| gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }} | |
| ## Include/Guid/Ip4IScsiConfigHii.h | |
| gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }} | |
| gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }} | |
| ## Include/Guid/ZeroGuid.h | |
| gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} | |
| ## Include/Guid/MtcVendor.h | |
| gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }} | |
| ## Guid for Firmware Performance Data Table (FPDT) implementation. | |
| # Include/Guid/FirmwarePerformance.h | |
| gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }} | |
| gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }} | |
| ## Include/Guid/ExitBootServiceFailed.h | |
| gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } } | |
| ## Include/Guid/ConnectConInEvent.h | |
| gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }} | |
| ## Include/Guid/StatusCodeDataTypeVariable.h | |
| gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }} | |
| ## Include/Guid/MemoryProfile.h | |
| gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }} | |
| ## Include/Protocol/VarErrorFlag.h | |
| gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } } | |
| ## GUID indicates the LZMA custom compress/decompress algorithm. | |
| # Include/Guid/LzmaDecompress.h | |
| gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }} | |
| gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }} | |
| ## Include/Guid/TtyTerm.h | |
| gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }} | |
| ## Include/Guid/HiiBootMaintenanceFormset.h | |
| gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }} | |
| [Ppis] | |
| ## Include/Ppi/AtaController.h | |
| gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }} | |
| ## Include/Ppi/UsbHostController.h | |
| gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }} | |
| ## Include/Ppi/Usb2HostController.h | |
| gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }} | |
| ## Include/Ppi/UsbController.h | |
| gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }} | |
| ## Include/Ppi/UsbIo.h | |
| gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }} | |
| ## Include/Ppi/SecPerformance.h | |
| gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }} | |
| ## Include/Ppi/SmmCommunication.h | |
| gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }} | |
| ## Include/Ppi/SmmAccess.h | |
| gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }} | |
| ## Include/Ppi/SmmControl.h | |
| gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }} | |
| ## Include/Ppi/PostBootScriptTable.h | |
| gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}} | |
| ## Include/Ppi/SerialPortPei.h | |
| gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}} | |
| ## Include/Ppi/UfsHostController.h | |
| gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }} | |
| [Protocols] | |
| ## Load File protocol provides capability to load and unload EFI image into memory and execute it. | |
| # Include/Protocol/LoadPe32Image.h | |
| # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image. | |
| # If developer need implement such functionality, they should use BasePeCoffLib. | |
| gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }} | |
| ## Print protocol defines basic print functions to print the format unicode and ascii string. | |
| # Include/Protocol/Print2.h | |
| gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } } | |
| ## This protocol defines the generic memory test interfaces in Dxe phase. | |
| # Include/Protocol/GenericMemoryTest.h | |
| gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }} | |
| ## Include/Protocol/Dpc.h | |
| gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }} | |
| ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices. | |
| # Include/Protocol/FaultTolerantWrite.h | |
| gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }} | |
| ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment. | |
| # Include/Protocol/SmmFaultTolerantWrite.h | |
| gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }} | |
| ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV. | |
| # Include/Protocol/SwapAddressRange.h | |
| gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }} | |
| ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment. | |
| # Include/Protocol/SmmSwapAddressRange.h | |
| gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }} | |
| ## This protocol is intended for use as a means to store data in the EFI SMM environment. | |
| # Include/Protocol/SmmVariableProtocol.h | |
| gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }} | |
| ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled. | |
| # Include/Protocol/VariableLock.h | |
| gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }} | |
| ## Include/Protocol/VarCheck.h | |
| gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } } | |
| ## Include/Protocol/SmmVarCheck.h | |
| gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } } | |
| ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment. | |
| # Include/Protocol/SmmFirmwareVolumeBlock.h | |
| gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }} | |
| ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules | |
| # Include/Guid/DebugMask.h | |
| gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} } | |
| ## Include/Protocol/LockBox.h | |
| gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }} | |
| ## Include/Protocol/FormBrowserEx.h | |
| gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } } | |
| ## Include/Protocol/EbcVmTest.h | |
| gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } } | |
| ## Include/Protocol/EbcSimpleDebugger.h | |
| gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } } | |
| ## Include/Protocol/BootLogo.h | |
| gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } } | |
| ## Include/Protocol/DisplayProtocol.h | |
| gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } } | |
| ## Include/Protocol/FormBrowserEx2.h | |
| gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } } | |
| ## Include/Protocol/UfsHostController.h | |
| gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } } | |
| ## Include/Protocol/EsrtManagement.h | |
| gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }} | |
| ## Include/Protocol/SmmExitBootServices.h | |
| gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } } | |
| ## Include/Protocol/SmmLegacyBoot.h | |
| gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } } | |
| ## Include/Protocol/SmmReadyToBoot.h | |
| gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } } | |
| # | |
| # [Error.gEfiMdeModulePkgTokenSpaceGuid] | |
| # 0x80000001 | Invalid value provided. | |
| # 0x80000002 | Reserved bits must be set to zero. | |
| # 0x80000003 | Incorrect progress code provided. | |
| # 0x80000004 | Invalid foreground color specified. | |
| # 0x80000005 | Invalid background color specified. | |
| # 0x80000006 | Incorrect error code provided. | |
| # | |
| [PcdsFeatureFlag] | |
| ## Indicates if the platform can support update capsule across a system reset.<BR><BR> | |
| # TRUE - Supports update capsule across a system reset.<BR> | |
| # FALSE - Does not support update capsule across a system reset.<BR> | |
| # @Prompt Enable update capsule across a system reset. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d | |
| ## Indicates if all PCD PPI services will be enabled.<BR><BR> | |
| # TRUE - All PCD PPI services will be produced.<BR> | |
| # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR> | |
| # @Prompt Enable full PEI PCD services. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020 | |
| ## Indicates if the Device Path To Text Protocol should be produced by the platform. | |
| # It can be disabled to save size.<BR><BR> | |
| # TRUE - Device Path To Text Protocol will be produced.<BR> | |
| # FALSE - Device Path To Text Protocol will not be produced.<BR> | |
| # @Prompt Enable Device Path to Text support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037 | |
| ## Indicates if the Device Path From Text Protocol should be produced by the platform. | |
| # It can be disabled to save size.<BR><BR> | |
| # TRUE - Device Path From Text Protocol will be produced.<BR> | |
| # FALSE - Device Path From Text Protocol will not be produced.<BR> | |
| # @Prompt Enable Device Path From Text support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038 | |
| ## Indicates if the statistics about variable usage will be collected. This information is | |
| # stored as a vendor configuration table into the EFI system table. | |
| # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get | |
| # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR> | |
| # TRUE - Statistics about variable usage will be collected.<BR> | |
| # FALSE - Statistics about variable usage will not be collected.<BR> | |
| # @Prompt Enable variable statistics collection. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f | |
| ## Indicates if Unicode Collation Protocol will be installed.<BR><BR> | |
| # TRUE - Installs Unicode Collation Protocol.<BR> | |
| # FALSE - Does not install Unicode Collation Protocol.<BR> | |
| # @Prompt Enable Unicode Collation support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040 | |
| ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR> | |
| # TRUE - Installs Unicode Collation 2 Protocol.<BR> | |
| # FALSE - Does not install Unicode Collation 2 Protocol.<BR> | |
| # @Prompt Enable Unicode Collation 2 support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041 | |
| ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe. | |
| # It could be set FALSE to save size.<BR><BR> | |
| # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR> | |
| # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR> | |
| # @Prompt Enable ConOut GOP support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042 | |
| ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe. | |
| # It could be set FALSE to save size.<BR><BR> | |
| # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR> | |
| # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR> | |
| # @Prompt Enable ConOut UGA support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043 | |
| ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module. | |
| # This PCD is used to tune PEI phase performance to reduce the search image time. | |
| # It can be set according to the generated image section type.<BR><BR> | |
| # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR> | |
| # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR> | |
| # @Prompt PeiCore search TE section first. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044 | |
| ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI | |
| # interrupt to access usb device in the case of absence of usb stack. | |
| # DUET platform requires the token to be TRUE.<BR><BR> | |
| # TRUE - Turn off usb legacy support.<BR> | |
| # FALSE - Does not turn off usb legacy support.<BR> | |
| # @Prompt Turn off USB legacy support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047 | |
| ## Indicates if HiiImageProtocol will be installed. | |
| # FALSE is for size reduction.<BR><BR> | |
| # TRUE - Installs HiiImageProtocol.<BR> | |
| # FALSE - Does not install HiiImageProtocol.<BR> | |
| # @Prompt Enable HII image support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100 | |
| ## Indicates if USB KeyBoard Driver disables the default keyboard layout. | |
| # The default keyboard layout serves as the backup when no keyboard layout can be retrieved | |
| # from HII database.<BR><BR> | |
| # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR> | |
| # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR> | |
| # @Prompt Disable default keyboard layout in USB KeyBoard Driver. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200 | |
| ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR> | |
| # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. | |
| # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR> | |
| # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler. | |
| # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR> | |
| # @Prompt Enable framework backward compatibility support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009 | |
| ## Indicates if HelloWorld Application will print the verbose information. | |
| # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR> | |
| # TRUE - HelloWorld Application will print the verbose information.<BR> | |
| # FALSE - HelloWorld Application will not print the verbose information.<BR> | |
| # @Prompt Enable HelloWorld print. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a | |
| ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR> | |
| # TRUE - Produces FULL FTW protocol services (total six APIs).<BR> | |
| # FALSE - Only FTW Write service is available.<BR> | |
| # @Prompt Enable FULL FTW services. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b | |
| ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR> | |
| # TRUE - DXE IPL will support UEFI decompression.<BR> | |
| # FALSE - DXE IPL will not support UEFI decompression to save space.<BR> | |
| # @Prompt Enable UEFI decompression support in DXE IPL. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c | |
| ## Indicates if PciBus driver supports the hot plug device.<BR><BR> | |
| # TRUE - PciBus driver supports the hot plug device.<BR> | |
| # FALSE - PciBus driver doesn't support the hot plug device.<BR> | |
| # @Prompt Enable PciBus hot plug device support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d | |
| ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR> | |
| # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR> | |
| # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR> | |
| # @Prompt Enable PCI bridge IO alignment probe. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e | |
| ## Indicates if StatusCode is reported via Serial port.<BR><BR> | |
| # TRUE - Reports StatusCode via Serial port.<BR> | |
| # FALSE - Does not report StatusCode via Serial port.<BR> | |
| # @Prompt Enable StatusCode via Serial port. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022 | |
| ## Indicates if StatusCode is stored in memory. | |
| # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR> | |
| # TRUE - Stores StatusCode in memory.<BR> | |
| # FALSE - Does not store StatusCode in memory.<BR> | |
| # @Prompt Enable StatusCode via memory. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023 | |
| ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR> | |
| # TRUE - Replays PEI phase StatusCode in DXE phased.<BR> | |
| # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR> | |
| # @Prompt Enable PEI StatusCode replay in DXE phase | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d | |
| ## Indicates if ACPI SDT protocol will be installed.<BR><BR> | |
| # TRUE - Installs ACPI SDT protocol.<BR> | |
| # FALSE - Does not install ACPI SDT protocol.<BR> | |
| # @Prompt Enable ACPI SDT support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d | |
| ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled. | |
| # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR> | |
| # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR> | |
| # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR> | |
| # @Prompt Enable unaligned PCI I/O support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e | |
| ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR> | |
| # TRUE - TEXT statement will always be set to GrayOut.<BR> | |
| # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR> | |
| # @Prompt Always GrayOut TEXT statement. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f | |
| ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR> | |
| # TRUE - The unselectable menu will be set to GrayOut.<BR> | |
| # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR> | |
| # @Prompt GrayOut read only menu. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070 | |
| ## Indicates if recovery from IDE disk will be supported.<BR><BR> | |
| # TRUE - Supports recovery from IDE disk.<BR> | |
| # FALSE - Does not support recovery from IDE disk.<BR> | |
| # @Prompt Enable recovery on IDE disk. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060 | |
| ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR> | |
| # TRUE - Supports recovery from FAT floppy disk.<BR> | |
| # FALSE - Does not support recovery from FAT floppy disk.<BR> | |
| # @Prompt Enable recovery on FAT floppy disk. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061 | |
| ## Indicates if recovery from data CD will be supported.<BR><BR> | |
| # TRUE - Supports recovery from data CD.<BR> | |
| # FALSE - Does not support recovery from data CD.<BR> | |
| # @Prompt Enable recovery on data CD. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062 | |
| ## Indicates if recovery from FAT USB disk will be supported.<BR><BR> | |
| # TRUE - Supports recovery from USB disk.<BR> | |
| # FALSE - Does not support recovery from USB disk.<BR> | |
| # @Prompt Enable recovery on FAT USB disk. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063 | |
| ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR> | |
| # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR> | |
| # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR> | |
| # @Prompt Enable S3 performance data support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064 | |
| [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64] | |
| ## Indicates if DxeIpl should switch to long mode to enter DXE phase. | |
| # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore | |
| # is built in firmware.<BR><BR> | |
| # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR> | |
| # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR> | |
| # @Prompt DxeIpl switch to long mode. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b | |
| ## Indicates if DxeIpl should rebuild page tables. This flag only | |
| # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR> | |
| # TRUE - DxeIpl will rebuild page tables.<BR> | |
| # FALSE - DxeIpl will not rebuild page tables.<BR> | |
| # @Prompt DxeIpl rebuild page tables. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c | |
| [PcdsFixedAtBuild] | |
| ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR> | |
| # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR> | |
| # 0: Disable the feature.<BR> | |
| # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR> | |
| # @Prompt Enable LMFA feature. | |
| # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF) | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015 | |
| ## Progress Code for OS Loader LoadImage start.<BR><BR> | |
| # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR> | |
| # @Prompt Progress Code for OS Loader LoadImage start. | |
| # @ValidList 0x80000003 | 0x03058000 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030 | |
| ## Progress Code for OS Loader StartImage start.<BR><BR> | |
| # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR> | |
| # @Prompt Progress Code for OS Loader StartImage start. | |
| # @ValidList 0x80000003 | 0x03058001 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031 | |
| ## Progress Code for S3 Suspend start.<BR><BR> | |
| # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR> | |
| # @Prompt Progress Code for S3 Suspend start. | |
| # @ValidList 0x80000003 | 0x03078000 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032 | |
| ## Progress Code for S3 Suspend end.<BR><BR> | |
| # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR> | |
| # @Prompt Progress Code for S3 Suspend end. | |
| # @ValidList 0x80000003 | 0x03078001 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033 | |
| ## Error Code for SetVariable failure.<BR><BR> | |
| # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR> | |
| # @Prompt Error Code for SetVariable failure. | |
| # @ValidList 0x80000006 | 0x03058002 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040 | |
| [PcdsFixedAtBuild, PcdsPatchableInModule] | |
| ## Dynamic type PCD can be registered callback function for Pcd setting action. | |
| # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function | |
| # for a dynamic PCD used in PEI phase. | |
| # @Prompt Max PEI PCD callback number per PCD entry. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f | |
| ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress | |
| # to store PCD value. | |
| # @Prompt VPD base address. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010 | |
| ## Maximum number of FV is supported by PeiCore's dispatching. | |
| # @Prompt Maximum number of FV supported by PeiCore. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030 | |
| ## Maximum File count in every FV is supported by PeiCore's dispatching. | |
| # PeiCore supported File type includes PEIM, Combined PEIM and FV. | |
| # @Prompt Maximum File count per FV supported by PeiCore. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031 | |
| ## Maximum stack size for PeiCore. | |
| # @Prompt Maximum stack size for PeiCore. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032 | |
| ## Maximum PPI count is supported by PeiCore's PPI database. | |
| # @Prompt Maximum PPI count supported by PeiCore. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033 | |
| ## The maximum size of a single non-HwErr type variable. | |
| # @Prompt Maximum variable size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003 | |
| ## The maximum size of a single authenticated variable. | |
| # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize. | |
| # @Prompt Maximum authenticated variable size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009 | |
| ## The maximum size of single hardware error record variable.<BR><BR> | |
| # In IA32/X64 platforms, this value should be larger than 1KB.<BR> | |
| # In IA64 platforms, this value should be larger than 128KB.<BR> | |
| # @Prompt Maximum HwErr variable size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004 | |
| ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)). | |
| # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region. | |
| # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)). | |
| # this value is used to guarantee the space of HwErr type variable and not populated by common variable. | |
| # @Prompt HwErr variable storage size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006 | |
| ## The size of maximum user NV variable space.<BR><BR> | |
| # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR> | |
| # If the value is 0, it means user variable share the same NV storage with system variable, | |
| # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR> | |
| # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol, | |
| # otherwise the variable will be regarded as user variable.<BR> | |
| # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR> | |
| # 2) Variables managed by Variable driver internally.<BR> | |
| # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR> | |
| # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR> | |
| # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR> | |
| # @Prompt Maximum user NV variable space size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009 | |
| ## The size of NV variable space reserved at UEFI boottime.<BR><BR> | |
| # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR> | |
| # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings. | |
| # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR> | |
| # Then the common NV variable space size at boottime will be | |
| # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR> | |
| # and the common NV variable space size at runtime will be | |
| # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR> | |
| # @Prompt Boottime reserved NV variable space size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007 | |
| ## Reclaim variable space at EndOfDxe.<BR><BR> | |
| # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR> | |
| # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR> | |
| # @Prompt Reclaim variable space at EndOfDxe. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008 | |
| ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables. | |
| # @Prompt Variable storage size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005 | |
| ## FFS filename to find the ACPI tables. | |
| # @Prompt FFS name of ACPI tables storage. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016 | |
| ## FFS filename to find the capsule coalesce image. | |
| # @Prompt FFS name of capsule coalesce image. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017 | |
| ## Maximum number of performance log entries during PEI phase. | |
| # @Prompt Maximum number of PEI performance log entries. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f | |
| ## RTC Update Timeout Value(microsecond). | |
| # @Prompt RTC Update Timeout Value. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034 | |
| ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR> | |
| # TRUE - 16550 serial port registers are in MMIO space.<BR> | |
| # FALSE - 16550 serial port registers are in I/O space.<BR> | |
| # @Prompt Serial port registers use MMIO. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000 | |
| ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR> | |
| # TRUE - 16550 serial port hardware flow control will be enabled.<BR> | |
| # FALSE - 16550 serial port hardware flow control will be disabled.<BR> | |
| # @Prompt Enable serial port hardware flow control. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001 | |
| ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE. | |
| # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR> | |
| # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR> | |
| # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR> | |
| # @Prompt Enable serial port cable detetion. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006 | |
| ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8. | |
| # @Prompt Base address of serial port registers. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002 | |
| ## Baud rate for the 16550 serial port. Default is 115200 baud. | |
| # @Prompt Baud rate for serial port. | |
| # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003 | |
| ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR> | |
| # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR> | |
| # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR> | |
| # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR> | |
| # BIT7..BIT6 - Reserved. Must be 0.<BR> | |
| # | |
| # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR> | |
| # @Prompt Serial port Line Control settings. | |
| # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004 | |
| ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR> | |
| # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR> | |
| # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR> | |
| # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR> | |
| # BIT4..BIT3 - Reserved. Must be 0.<BR> | |
| # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR> | |
| # BIT7..BIT6 - Reserved. Must be 0.<BR> | |
| # | |
| # Default is to enable and clear all FIFOs.<BR> | |
| # @Prompt Serial port FIFO Control settings. | |
| # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005 | |
| ## This setting can override the default TFTP block size. A value of 0 computes | |
| # the default from MTU information. A non-zero value will be used as block size | |
| # in bytes. | |
| # @Prompt TFTP block size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026 | |
| ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER | |
| # structure. The default value for this PCD is 0, which means that the DXE Core | |
| # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB | |
| # boundary as close to the top of memory as feasible. If this PCD is set to a | |
| # value other than 0, then the DXE Core will first attempt to allocate the | |
| # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified | |
| # by this PCD, and if that allocation fails, retry the allocation on a 4MB | |
| # boundary as close to the top of memory as feasible. | |
| # @Prompt Maximum Efi System Table Pointer address. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027 | |
| ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR> | |
| # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR> | |
| # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR> | |
| # @Prompt Shadow Peim On S3 Boot. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028 | |
| ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR> | |
| # This PCD is used on other boot path except for S3 boot. | |
| # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR> | |
| # FALSE - Not shadow PEIM after memory is ready.<BR> | |
| # @Prompt Shadow Peim and PeiCore on boot | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029 | |
| ## The mask is used to control memory profile behavior.<BR><BR> | |
| # BIT0 - Enable UEFI memory profile.<BR> | |
| # BIT1 - Enable SMRAM profile.<BR> | |
| # @Prompt Memory Profile Property. | |
| # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041 | |
| ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR> | |
| # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR> | |
| # | |
| # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR> | |
| # EfiReservedMemoryType 0x0001<BR> | |
| # EfiLoaderCode 0x0002<BR> | |
| # EfiLoaderData 0x0004<BR> | |
| # EfiBootServicesCode 0x0008<BR> | |
| # EfiBootServicesData 0x0010<BR> | |
| # EfiRuntimeServicesCode 0x0020<BR> | |
| # EfiRuntimeServicesData 0x0040<BR> | |
| # EfiConventionalMemory 0x0080<BR> | |
| # EfiUnusableMemory 0x0100<BR> | |
| # EfiACPIReclaimMemory 0x0200<BR> | |
| # EfiACPIMemoryNVS 0x0400<BR> | |
| # EfiMemoryMappedIO 0x0800<BR> | |
| # EfiMemoryMappedIOPortSpace 0x1000<BR> | |
| # EfiPalCode 0x2000<BR> | |
| # EfiPersistentMemory 0x4000<BR> | |
| # OEM Reserved 0x4000000000000000<BR> | |
| # OS Reserved 0x8000000000000000<BR> | |
| # | |
| # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR> | |
| # | |
| # @Prompt Memory profile memory type. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042 | |
| ## PCI Serial Device Info. It is an array of Device, Function, and Power Management | |
| # information that describes the path that contains zero or more PCI to PCI briges | |
| # followed by a PCI serial device. Each array entry is 4-bytes in length. The | |
| # first byte is the PCI Device Number, then second byte is the PCI Function Number, | |
| # and the last two bytes are the offset to the PCI power management capabilities | |
| # register used to manage the D0-D3 states. If a PCI power management capabilities | |
| # register is not present, then the last two bytes in the offset is set to 0. The | |
| # array is terminated by an array entry with a PCI Device Number of 0xFF. For a | |
| # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF. | |
| # @Prompt Pci Serial Device Info | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067 | |
| ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. | |
| # @Prompt Serial Port Extended Transmit FIFO Size in Bytes | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068 | |
| ## This PCD points to the file name GUID of the BootManagerMenuApp | |
| # Platform can customize the PCD to point to different application for Boot Manager Menu | |
| # @Prompt Boot Manager Menu File | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b | |
| ## This PCD points to the formset GUID of the driver health management form | |
| # The form will be popped up by BDS core when there are Configuration Required driver health intances. | |
| # Platform can customize the PCD to point to different formset. | |
| # @Prompt Driver Health Management Form | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c | |
| ## The number of bytes between registers in serial device. The default is 1 byte. | |
| # @Prompt Serial Port Register Stride in Bytes | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d | |
| ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR> | |
| # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR> | |
| # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR> | |
| # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A | |
| [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] | |
| ## This PCD defines the Console output row. The default value is 25 according to UEFI spec. | |
| # This PCD could be set to 0 then console output would be at max column and max row. | |
| # @Prompt Console output row. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006 | |
| ## This PCD defines the Console output column. The default value is 80 according to UEFI spec. | |
| # This PCD could be set to 0 then console output would be at max column and max row. | |
| # @Prompt Console output column. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007 | |
| ## This PCD defines the video horizontal resolution. | |
| # If this PCD is set to 0 then video resolution would be at highest resolution. | |
| # @Prompt Video horizontal resolution. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009 | |
| ## This PCD defines the video vertical resolution. | |
| # If this PCD is set to 0 then video resolution would be at highest resolution. | |
| # @Prompt Video vertical resolution. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a | |
| # The 4 PCDs below are used to specify the video resolution and text mode of text setup. | |
| # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution, | |
| # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file. | |
| # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers | |
| # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work | |
| # for text setup. | |
| ## Specify the video horizontal resolution of text setup. | |
| # @Prompt Video Horizontal Resolution of Text Setup | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b | |
| ## Specify the video vertical resolution of text setup. | |
| # @Prompt Video Vertical Resolution of Text Setup | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c | |
| ## Specify the console output column of text setup. | |
| # @Prompt Console Output Column of Text Setup | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d | |
| ## Specify the console output row of text setup. | |
| # @Prompt Console Output Row of Text Setup | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e | |
| [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] | |
| ## UART clock frequency is for the baud rate configuration. | |
| # @Prompt Serial Port Clock Rate. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066 | |
| ## This PCD points to the front page formset GUID | |
| # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page | |
| # @Prompt Front Page Formset. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e | |
| ## Base address of the NV variable range in flash device. | |
| # @Prompt Base address of flash NV variable range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001 | |
| ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize. | |
| # The root cause is that variable driver will use FTW protocol to reclaim variable region. | |
| # If the length of variable region is larger than FTW spare size, it means the whole variable region can not | |
| # be reflushed through the manner of fault tolerant write. | |
| # @Prompt Size of flash NV variable range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002 | |
| ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned. | |
| # @Prompt Base address of flash FTW spare block range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 | |
| ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned. | |
| # The root cause is that variable driver will use FTW protocol to reclaim variable region. | |
| # If the length of variable region is larger than FTW spare size, it means the whole variable region can not | |
| # be reflushed through the manner of fault tolerant write. | |
| # @Prompt Size of flash FTW spare block range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014 | |
| ## Base address of the FTW working block range in flash device. | |
| # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned. | |
| # @Prompt Base address of flash FTW working block range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 | |
| ## Size of the FTW working block range. | |
| # If the value is less than one block size, the work space range should not span blocks. | |
| # If the value is larger than one block size, it should be block size aligned. | |
| # @Prompt Size of flash FTW working block range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011 | |
| ## 64-bit Base address of the NV variable range in flash device. | |
| # @Prompt 64-bit Base address of flash NV variable range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001 | |
| ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned. | |
| # @Prompt 64-bit Base address of flash FTW spare block range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013 | |
| ## 64-bit Base address of the FTW working block range in flash device. | |
| # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned. | |
| # @Prompt 64-bit Base address of flash FTW working block range. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010 | |
| ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store. | |
| # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize. | |
| # @Prompt Reserved memory range for EMU variable NV storage. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008 | |
| ## This PCD defines the times to print hello world string. | |
| # This PCD is a sample to explain UINT32 PCD usage. | |
| # @Prompt HellowWorld print times. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005 | |
| ## This PCD defines the HelloWorld print string. | |
| # This PCD is a sample to explain String typed PCD usage. | |
| # @Prompt HelloWorld print string. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 | |
| ## Indicates the maximum size of the capsule image with a reset flag that the platform can support. | |
| # The default max size is 100MB (0x6400000) for more than one large capsule images. | |
| # @Prompt Max size of populated capsule. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e | |
| ## Indicates the maximum size of the capsule image without a reset flag that the platform can support. | |
| # The default max size is 10MB (0xa00000) for the casule image without reset flag setting. | |
| # @Prompt Max size of non-populated capsule. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f | |
| ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table. | |
| # @Prompt Firmware vendor. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050 | |
| ## Firmware revision that is the default revision filled into the EFI System Table. | |
| # @Prompt Firmware revision. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051 | |
| ## Null-terminated Unicode string that describes the firmware version. | |
| # @Prompt Firmware version string. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052 | |
| ## Null-terminated Unicode string that contains the date the firmware was released | |
| # @Prompt Firmware release data string. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053 | |
| ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true. | |
| # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR> | |
| # The default value in PeiPhase is 1 KBytes.<BR> | |
| # The default value in DxePhase is 128 KBytes.<BR> | |
| # @Prompt StatusCode memory size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054 | |
| ## Indicates if to reset system when memory type information changes.<BR><BR> | |
| # TRUE - Resets system when memory type information changes.<BR> | |
| # FALSE - Does not reset system when memory type information changes.<BR> | |
| # @Prompt Reset on memory type information change. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056 | |
| ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE. | |
| # Only following values defined in UEFI specification are valid:<BR><BR> | |
| # 0x00 (EFI_BLACK)<BR> | |
| # 0x01 (EFI_BLUE)<BR> | |
| # 0x02 (EFI_GREEN)<BR> | |
| # 0x03 (EFI_CYAN)<BR> | |
| # 0x04 (EFI_RED)<BR> | |
| # 0x05 (EFI_MAGENTA)<BR> | |
| # 0x06 (EFI_BROWN)<BR> | |
| # 0x07 (EFI_LIGHTGRAY)<BR> | |
| # 0x08 (EFI_DARKGRAY)<BR> | |
| # 0x09 (EFI_LIGHTBLUE)<BR> | |
| # 0x0A (EFI_LIGHTGREEN)<BR> | |
| # 0x0B (EFI_LIGHTCYAN)<BR> | |
| # 0x0C (EFI_LIGHTRED)<BR> | |
| # 0x0D (EFI_LIGHTMAGENTA)<BR> | |
| # 0x0E (EFI_YELLOW)<BR> | |
| # 0x0F (EFI_WHITE)<BR> | |
| # @Prompt Foreground color for browser subtile. | |
| # @ValidRange 0x80000004 | 0x00 - 0x0F | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057 | |
| ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK. | |
| # Only following values defined in UEFI specification are valid:<BR><BR> | |
| # 0x00 (EFI_BLACK)<BR> | |
| # 0x01 (EFI_BLUE)<BR> | |
| # 0x02 (EFI_GREEN)<BR> | |
| # 0x03 (EFI_CYAN)<BR> | |
| # 0x04 (EFI_RED)<BR> | |
| # 0x05 (EFI_MAGENTA)<BR> | |
| # 0x06 (EFI_BROWN)<BR> | |
| # 0x07 (EFI_LIGHTGRAY)<BR> | |
| # 0x08 (EFI_DARKGRAY)<BR> | |
| # 0x09 (EFI_LIGHTBLUE)<BR> | |
| # 0x0A (EFI_LIGHTGREEN)<BR> | |
| # 0x0B (EFI_LIGHTCYAN)<BR> | |
| # 0x0C (EFI_LIGHTRED)<BR> | |
| # 0x0D (EFI_LIGHTMAGENTA)<BR> | |
| # 0x0E (EFI_YELLOW)<BR> | |
| # 0x0F (EFI_WHITE)<BR> | |
| # @Prompt Foreground color for browser field. | |
| # @ValidRange 0x80000004 | 0x00 - 0x0F | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058 | |
| ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser. | |
| # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR> | |
| # 0x00 (EFI_BLACK)<BR> | |
| # 0x01 (EFI_BLUE)<BR> | |
| # 0x02 (EFI_GREEN)<BR> | |
| # 0x03 (EFI_CYAN)<BR> | |
| # 0x04 (EFI_RED)<BR> | |
| # 0x05 (EFI_MAGENTA)<BR> | |
| # 0x06 (EFI_BROWN)<BR> | |
| # 0x07 (EFI_LIGHTGRAY)<BR> | |
| # 0x08 (EFI_DARKGRAY)<BR> | |
| # 0x09 (EFI_LIGHTBLUE)<BR> | |
| # 0x0A (EFI_LIGHTGREEN)<BR> | |
| # 0x0B (EFI_LIGHTCYAN)<BR> | |
| # 0x0C (EFI_LIGHTRED)<BR> | |
| # 0x0D (EFI_LIGHTMAGENTA)<BR> | |
| # 0x0E (EFI_YELLOW)<BR> | |
| # 0x0F (EFI_WHITE)<BR> | |
| # @Prompt Foreground color for highlighted browser field. | |
| # @ValidRange 0x80000004 | 0x00 - 0x0F | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059 | |
| ## Specify the background color for highlighted prompt and Question value text in HII Form Browser. | |
| # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR> | |
| # 0x00 (EFI_BACKGROUND_BLACK)<BR> | |
| # 0x10 (EFI_BACKGROUND_BLUE)<BR> | |
| # 0x20 (EFI_BACKGROUND_GREEN)<BR> | |
| # 0x30 (EFI_BACKGROUND_CYAN)<BR> | |
| # 0x40 (EFI_BACKGROUND_RED)<BR> | |
| # 0x50 (EFI_BACKGROUND_MAGENTA)<BR> | |
| # 0x60 (EFI_BACKGROUND_BROWN)<BR> | |
| # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR> | |
| # @Prompt Background color for highlighted browser field. | |
| # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A | |
| ## Time in second to delay for SATA devices to spin-up for recovery. | |
| # @Prompt SATA spin-up delay time in second for recovery path. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B | |
| ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory | |
| # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2. | |
| # When changing the value of this PCD, the platform developer should make sure the memory size is | |
| # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase. | |
| # @Prompt Reserved page number for S3 Boot Script Runtime Table. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C | |
| ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase. | |
| # The default size is 32K. When changing the value of this PCD, the platform developer should | |
| # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path. | |
| # @Prompt Stack size for CapsulePei transfer to long mode. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D | |
| ## Indicates if 1G page table will be enabled.<BR><BR> | |
| # TRUE - 1G page table will be enabled.<BR> | |
| # FALSE - 1G page table will not be enabled.<BR> | |
| # @Prompt Enable 1G page table support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E | |
| ## Indicates if the Single Root I/O virtualization is supported.<BR><BR> | |
| # TRUE - Single Root I/O virtualization is supported.<BR> | |
| # FALSE - Single Root I/O virtualization is not supported.<BR> | |
| # @Prompt Enable SRIOV support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044 | |
| ## Indicates if the Alternative Routing-ID is supported.<BR><BR> | |
| # TRUE - Alternative Routing-ID is supported.<BR> | |
| # FALSE - Alternative Routing-ID is not supported.<BR> | |
| # @Prompt Enable ARI support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045 | |
| ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR> | |
| # TRUE - Multi Root I/O virtualization is supported.<BR> | |
| # FALSE - Multi Root I/O virtualization is not supported.<BR> | |
| # @Prompt Enable MRIOV support. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046 | |
| ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR> | |
| # BITN set indicates 2 of n+12 power<BR> | |
| # BIT0 set indicates 4KB alignment<BR> | |
| # BIT1 set indicates 8KB alignment<BR> | |
| # @Prompt SRIOV system page size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047 | |
| ## SMBIOS version. | |
| # @Prompt SMBIOS version. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055 | |
| ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure. | |
| # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A | |
| ## SMBIOS produce method. | |
| # BIT0 set indicates 32-bit entry point and table are produced.<BR> | |
| # BIT1 set indicates 64-bit entry point and table are produced.<BR> | |
| # @Prompt The policy to produce SMBIOS entry point and table. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069 | |
| ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for | |
| # the extension FPDT boot records received after ReadyToBoot and before ExitBootService. | |
| # @Prompt Pad size for extension FPDT boot records. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F | |
| ## Indicates if ConIn device are connected on demand.<BR><BR> | |
| # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced | |
| # by Consplitter should be called before any real key read operation.<BR> | |
| # FALSE - ConIn device may be connected normally during BDS.<BR> | |
| # @Prompt ConIn connect on demand. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060 | |
| ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR> | |
| # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR> | |
| # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR> | |
| # @Prompt Enable ATA S.M.A.R.T feature. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065 | |
| ## Indicates if full PCI enumeration is disabled.<BR><BR> | |
| # TRUE - Full PCI enumeration is disabled.<BR> | |
| # FALSE - Full PCI enumeration is not disabled.<BR> | |
| # @Prompt Disable full PCI enumeration. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048 | |
| ## Disk I/O - Number of Data Buffer block. | |
| # Define the size in block of the pre-allocated buffer. It provide better | |
| # performance for large Disk I/O requests. | |
| # @Prompt Disk I/O - Number of Data Buffer block. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039 | |
| ## This PCD specifies the PCI-based UFS host controller mmio base address. | |
| # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS | |
| # host controllers, their mmio base addresses are calculated one by one from this base address. | |
| # @Prompt Mmio base address of pci-based UFS host controller. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061 | |
| ## Specify Max ESRT cache entry number supported for FMP instances | |
| # | |
| # @Prompt Max FMP ESRT entry number to be synced & cached in repository. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b | |
| ## Specify Max ESRT cache entry number supported for Non FMP instances | |
| # | |
| # @Prompt Max Non-FMP ESRT entry number to be cached in repository. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c | |
| ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process | |
| # | |
| # @Prompt Flag to request system reboot after processing capsule. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d | |
| ## Publish PropertiesTable or not. | |
| # | |
| # If this PCD is TRUE, DxeCore publishs PropertiesTable. | |
| # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all | |
| # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in | |
| # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable. | |
| # If this PCD is FALSE, DxeCore does not publish PropertiesTable. | |
| # | |
| # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map: | |
| # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and | |
| # use EfiRuntimeServicesData for runtime driver PE image header and other section. | |
| # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO. | |
| # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP. | |
| # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP. | |
| # | |
| # NOTE: Platform need gurantee this PCD is set correctly. Platform should set | |
| # this PCD to be TURE if and only if all runtime driver has seperated Code/Data | |
| # section. If PE code/data sections are merged, the result is unpredictable. | |
| # | |
| # @Prompt Publish UEFI PropertiesTable. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e | |
| ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification. | |
| # @Prompt Default OEM ID for ACPI table creation. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034 | |
| ## Default OEM Table ID for ACPI table creation, it is "EDK2 ". | |
| # @Prompt Default OEM Table ID for ACPI table creation. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035 | |
| ## Default OEM Revision for ACPI table creation. | |
| # @Prompt Default OEM Revision for ACPI table creation. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036 | |
| ## Default Creator ID for ACPI table creation. | |
| # @Prompt Default Creator ID for ACPI table creation. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037 | |
| ## Default Creator Revision for ACPI table creation. | |
| # @Prompt Default Creator Revision for ACPI table creation. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038 | |
| ## Indicates if to set NX for stack.<BR><BR> | |
| # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR> | |
| # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require | |
| # IA32 PAE is supported and Execute Disable Bit is available.<BR> | |
| # TRUE - to set NX for stack.<BR> | |
| # FALSE - Not to set NX for stack.<BR> | |
| # @Prompt Set NX for stack. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f | |
| [PcdsPatchableInModule] | |
| ## Specify memory size with page number for PEI code when | |
| # Loading Module at Fixed Address feature is enabled. | |
| # The value will be set by the build tool. | |
| # @Prompt LMFA PEI code page number. | |
| # @ValidList 0x80000001 | 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029 | |
| ## Specify memory size with page number for DXE boot time code when | |
| # Loading Module at Fixed Address feature is enabled. | |
| # The value will be set by the build tool. | |
| # @Prompt LMFA DXE boot code page number. | |
| # @ValidList 0x80000001 | 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a | |
| ## Specify memory size with page number for DXE runtime code when | |
| # Loading Module at Fixed Address feature is enabled. | |
| # The value will be set by the build tool. | |
| # @Prompt LMFA DXE runtime code page number. | |
| # @ValidList 0x80000001 | 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b | |
| ## Specify memory size with page number for SMM code when | |
| # Loading Module at Fixed Address feature is enabled. | |
| # The value will be set by the build tool. | |
| # @Prompt LMFA SMM code page number. | |
| # @ValidList 0x80000001 | 0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c | |
| [PcdsDynamic, PcdsDynamicEx] | |
| ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library | |
| # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is | |
| # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the | |
| # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library. | |
| # @Prompt S3 Boot Script Table Private Data pointer. | |
| # @ValidList 0x80000001 | 0x0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000 | |
| ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library | |
| # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is | |
| # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the | |
| # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library. | |
| # @Prompt S3 Boot Script Table Private Smm Data pointer. | |
| # @ValidList 0x80000001 | 0x0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001 | |
| ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 | |
| # Virtual to Physical mapping according to the processor physical address bits. | |
| # @Prompt Identify Mapping Page Table pointer. | |
| # @ValidList 0x80000001 | 0x0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002 | |
| [UserExtensions.TianoCore."ExtraFiles"] | |
| MdeModulePkgExtra.uni |