| /** @file | |
| CPU DXE Module. | |
| Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "CpuDxe.h" | |
| #include "CpuMp.h" | |
| UINTN gMaxLogicalProcessorNumber; | |
| UINTN gApStackSize; | |
| UINTN gPollInterval = 100; // 100 microseconds | |
| MP_SYSTEM_DATA mMpSystemData; | |
| VOID *mCommonStack = 0; | |
| VOID *mTopOfApCommonStack = 0; | |
| VOID *mApStackStart = 0; | |
| volatile BOOLEAN mStopCheckAllAPsStatus = TRUE; | |
| EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = { | |
| GetNumberOfProcessors, | |
| GetProcessorInfo, | |
| StartupAllAPs, | |
| StartupThisAP, | |
| SwitchBSP, | |
| EnableDisableAP, | |
| WhoAmI | |
| }; | |
| /** | |
| Get Mp Service Lock. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified processor | |
| **/ | |
| VOID | |
| GetMpSpinLock ( | |
| IN CPU_DATA_BLOCK *CpuData | |
| ) | |
| { | |
| while (!AcquireSpinLockOrFail (&CpuData->CpuDataLock)) { | |
| CpuPause (); | |
| } | |
| } | |
| /** | |
| Release Mp Service Lock. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified processor | |
| **/ | |
| VOID | |
| ReleaseMpSpinLock ( | |
| IN CPU_DATA_BLOCK *CpuData | |
| ) | |
| { | |
| ReleaseSpinLock (&CpuData->CpuDataLock); | |
| } | |
| /** | |
| Check whether caller processor is BSP. | |
| @retval TRUE the caller is BSP | |
| @retval FALSE the caller is AP | |
| **/ | |
| BOOLEAN | |
| IsBSP ( | |
| VOID | |
| ) | |
| { | |
| UINTN CpuIndex; | |
| CPU_DATA_BLOCK *CpuData; | |
| CpuData = NULL; | |
| WhoAmI (&mMpServicesTemplate, &CpuIndex); | |
| CpuData = &mMpSystemData.CpuDatas[CpuIndex]; | |
| return CpuData->Info.StatusFlag & PROCESSOR_AS_BSP_BIT ? TRUE : FALSE; | |
| } | |
| /** | |
| Get the Application Processors state. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified AP | |
| @retval CPU_STATE the AP status | |
| **/ | |
| CPU_STATE | |
| GetApState ( | |
| IN CPU_DATA_BLOCK *CpuData | |
| ) | |
| { | |
| CPU_STATE State; | |
| GetMpSpinLock (CpuData); | |
| State = CpuData->State; | |
| ReleaseMpSpinLock (CpuData); | |
| return State; | |
| } | |
| /** | |
| Set the Application Processors state. | |
| @param CpuData The pointer to CPU_DATA_BLOCK of specified AP | |
| @param State The AP status | |
| **/ | |
| VOID | |
| SetApState ( | |
| IN CPU_DATA_BLOCK *CpuData, | |
| IN CPU_STATE State | |
| ) | |
| { | |
| GetMpSpinLock (CpuData); | |
| CpuData->State = State; | |
| ReleaseMpSpinLock (CpuData); | |
| } | |
| /** | |
| Set the Application Processor prepare to run a function specified | |
| by Params. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified AP | |
| @param Procedure A pointer to the function to be run on enabled APs of the system | |
| @param ProcedureArgument Pointer to the optional parameter of the assigned function | |
| **/ | |
| VOID | |
| SetApProcedure ( | |
| IN CPU_DATA_BLOCK *CpuData, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN VOID *ProcedureArgument | |
| ) | |
| { | |
| GetMpSpinLock (CpuData); | |
| CpuData->Parameter = ProcedureArgument; | |
| CpuData->Procedure = Procedure; | |
| ReleaseMpSpinLock (CpuData); | |
| } | |
| /** | |
| Check the Application Processors Status whether contains the Flags. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified AP | |
| @param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION | |
| @retval TRUE the AP status includes the StatusFlag | |
| @retval FALSE the AP status excludes the StatusFlag | |
| **/ | |
| BOOLEAN | |
| TestCpuStatusFlag ( | |
| IN CPU_DATA_BLOCK *CpuData, | |
| IN UINT32 Flags | |
| ) | |
| { | |
| UINT32 Ret; | |
| GetMpSpinLock (CpuData); | |
| Ret = CpuData->Info.StatusFlag & Flags; | |
| ReleaseMpSpinLock (CpuData); | |
| return !!(Ret); | |
| } | |
| /** | |
| Bitwise-Or of the Application Processors Status with the Flags. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified AP | |
| @param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION | |
| **/ | |
| VOID | |
| CpuStatusFlagOr ( | |
| IN CPU_DATA_BLOCK *CpuData, | |
| IN UINT32 Flags | |
| ) | |
| { | |
| GetMpSpinLock (CpuData); | |
| CpuData->Info.StatusFlag |= Flags; | |
| ReleaseMpSpinLock (CpuData); | |
| } | |
| /** | |
| Bitwise-AndNot of the Application Processors Status with the Flags. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified AP | |
| @param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION | |
| **/ | |
| VOID | |
| CpuStatusFlagAndNot ( | |
| IN CPU_DATA_BLOCK *CpuData, | |
| IN UINT32 Flags | |
| ) | |
| { | |
| GetMpSpinLock (CpuData); | |
| CpuData->Info.StatusFlag &= ~Flags; | |
| ReleaseMpSpinLock (CpuData); | |
| } | |
| /** | |
| Searches for the next blocking AP. | |
| Search for the next AP that is put in blocking state by single-threaded StartupAllAPs(). | |
| @param NextNumber Pointer to the processor number of the next blocking AP. | |
| @retval EFI_SUCCESS The next blocking AP has been found. | |
| @retval EFI_NOT_FOUND No blocking AP exists. | |
| **/ | |
| EFI_STATUS | |
| GetNextBlockedNumber ( | |
| OUT UINTN *NextNumber | |
| ) | |
| { | |
| UINTN Number; | |
| CPU_STATE CpuState; | |
| CPU_DATA_BLOCK *CpuData; | |
| for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) { | |
| CpuData = &mMpSystemData.CpuDatas[Number]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| // | |
| // Skip BSP | |
| // | |
| continue; | |
| } | |
| CpuState = GetApState (CpuData); | |
| if (CpuState == CpuStateBlocked) { | |
| *NextNumber = Number; | |
| return EFI_SUCCESS; | |
| } | |
| } | |
| return EFI_NOT_FOUND; | |
| } | |
| /** | |
| Check if the APs state are finished, and update them to idle state | |
| by StartupAllAPs(). | |
| **/ | |
| VOID | |
| CheckAndUpdateAllAPsToIdleState ( | |
| VOID | |
| ) | |
| { | |
| UINTN ProcessorNumber; | |
| UINTN NextNumber; | |
| CPU_DATA_BLOCK *CpuData; | |
| EFI_STATUS Status; | |
| CPU_STATE CpuState; | |
| for (ProcessorNumber = 0; ProcessorNumber < mMpSystemData.NumberOfProcessors; ProcessorNumber++) { | |
| CpuData = &mMpSystemData.CpuDatas[ProcessorNumber]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| // | |
| // Skip BSP | |
| // | |
| continue; | |
| } | |
| if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| // | |
| // Skip Disabled processors | |
| // | |
| continue; | |
| } | |
| CpuState = GetApState (CpuData); | |
| if (CpuState == CpuStateFinished) { | |
| mMpSystemData.FinishCount++; | |
| if (mMpSystemData.SingleThread) { | |
| Status = GetNextBlockedNumber (&NextNumber); | |
| if (!EFI_ERROR (Status)) { | |
| SetApState (&mMpSystemData.CpuDatas[NextNumber], CpuStateReady); | |
| SetApProcedure (&mMpSystemData.CpuDatas[NextNumber], | |
| mMpSystemData.Procedure, | |
| mMpSystemData.ProcedureArgument); | |
| } | |
| } | |
| SetApState (CpuData, CpuStateIdle); | |
| } | |
| } | |
| } | |
| /** | |
| If the timeout expires before all APs returns from Procedure, | |
| we should forcibly terminate the executing AP and fill FailedList back | |
| by StartupAllAPs(). | |
| **/ | |
| VOID | |
| ResetAllFailedAPs ( | |
| VOID | |
| ) | |
| { | |
| CPU_DATA_BLOCK *CpuData; | |
| UINTN Number; | |
| CPU_STATE CpuState; | |
| if (mMpSystemData.FailedList != NULL) { | |
| *mMpSystemData.FailedList = AllocatePool ((mMpSystemData.StartCount - mMpSystemData.FinishCount + 1) * sizeof(UINTN)); | |
| ASSERT (*mMpSystemData.FailedList != NULL); | |
| } | |
| for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) { | |
| CpuData = &mMpSystemData.CpuDatas[Number]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| // | |
| // Skip BSP | |
| // | |
| continue; | |
| } | |
| if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| // | |
| // Skip Disabled processors | |
| // | |
| continue; | |
| } | |
| CpuState = GetApState (CpuData); | |
| if (CpuState != CpuStateIdle) { | |
| if (mMpSystemData.FailedList != NULL) { | |
| (*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex++] = Number; | |
| } | |
| ResetProcessorToIdleState (CpuData); | |
| } | |
| } | |
| if (mMpSystemData.FailedList != NULL) { | |
| (*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex] = END_OF_CPU_LIST; | |
| } | |
| } | |
| /** | |
| This service retrieves the number of logical processor in the platform | |
| and the number of those logical processors that are enabled on this boot. | |
| This service may only be called from the BSP. | |
| This function is used to retrieve the following information: | |
| - The number of logical processors that are present in the system. | |
| - The number of enabled logical processors in the system at the instant | |
| this call is made. | |
| Because MP Service Protocol provides services to enable and disable processors | |
| dynamically, the number of enabled logical processors may vary during the | |
| course of a boot session. | |
| If this service is called from an AP, then EFI_DEVICE_ERROR is returned. | |
| If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then | |
| EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors | |
| is returned in NumberOfProcessors, the number of currently enabled processor | |
| is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[out] NumberOfProcessors Pointer to the total number of logical | |
| processors in the system, including the BSP | |
| and disabled APs. | |
| @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical | |
| processors that exist in system, including | |
| the BSP. | |
| @retval EFI_SUCCESS The number of logical processors and enabled | |
| logical processors was retrieved. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL. | |
| @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| GetNumberOfProcessors ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| OUT UINTN *NumberOfProcessors, | |
| OUT UINTN *NumberOfEnabledProcessors | |
| ) | |
| { | |
| if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (!IsBSP ()) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| *NumberOfProcessors = mMpSystemData.NumberOfProcessors; | |
| *NumberOfEnabledProcessors = mMpSystemData.NumberOfEnabledProcessors; | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Gets detailed MP-related information on the requested processor at the | |
| instant this call is made. This service may only be called from the BSP. | |
| This service retrieves detailed MP-related information about any processor | |
| on the platform. Note the following: | |
| - The processor information may change during the course of a boot session. | |
| - The information presented here is entirely MP related. | |
| Information regarding the number of caches and their sizes, frequency of operation, | |
| slot numbers is all considered platform-related information and is not provided | |
| by this service. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[in] ProcessorNumber The handle number of processor. | |
| @param[out] ProcessorInfoBuffer A pointer to the buffer where information for | |
| the requested processor is deposited. | |
| @retval EFI_SUCCESS Processor information was returned. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist in the platform. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| GetProcessorInfo ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN UINTN ProcessorNumber, | |
| OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer | |
| ) | |
| { | |
| if (ProcessorInfoBuffer == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (!IsBSP ()) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) { | |
| return EFI_NOT_FOUND; | |
| } | |
| CopyMem (ProcessorInfoBuffer, &mMpSystemData.CpuDatas[ProcessorNumber], sizeof (EFI_PROCESSOR_INFORMATION)); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| This service executes a caller provided function on all enabled APs. APs can | |
| run either simultaneously or one at a time in sequence. This service supports | |
| both blocking and non-blocking requests. The non-blocking requests use EFI | |
| events so the BSP can detect when the APs have finished. This service may only | |
| be called from the BSP. | |
| This function is used to dispatch all the enabled APs to the function specified | |
| by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned | |
| immediately and Procedure is not started on any AP. | |
| If SingleThread is TRUE, all the enabled APs execute the function specified by | |
| Procedure one by one, in ascending order of processor handle number. Otherwise, | |
| all the enabled APs execute the function specified by Procedure simultaneously. | |
| If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all | |
| APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking | |
| mode, and the BSP returns from this service without waiting for APs. If a | |
| non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT | |
| is signaled, then EFI_UNSUPPORTED must be returned. | |
| If the timeout specified by TimeoutInMicroseconds expires before all APs return | |
| from Procedure, then Procedure on the failed APs is terminated. All enabled APs | |
| are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its | |
| content points to the list of processor handle numbers in which Procedure was | |
| terminated. | |
| Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| to make sure that the nature of the code that is executed on the BSP and the | |
| dispatched APs is well controlled. The MP Services Protocol does not guarantee | |
| that the Procedure function is MP-safe. Hence, the tasks that can be run in | |
| parallel are limited to certain independent tasks and well-controlled exclusive | |
| code. EFI services and protocols may not be called by APs unless otherwise | |
| specified. | |
| In blocking execution mode, BSP waits until all APs finish or | |
| TimeoutInMicroseconds expires. | |
| In non-blocking execution mode, BSP is freed to return to the caller and then | |
| proceed to the next task without having to wait for APs. The following | |
| sequence needs to occur in a non-blocking execution mode: | |
| -# The caller that intends to use this MP Services Protocol in non-blocking | |
| mode creates WaitEvent by calling the EFI CreateEvent() service. The caller | |
| invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent | |
| is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests | |
| the function specified by Procedure to be started on all the enabled APs, | |
| and releases the BSP to continue with other tasks. | |
| -# The caller can use the CheckEvent() and WaitForEvent() services to check | |
| the state of the WaitEvent created in step 1. | |
| -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP | |
| Service signals WaitEvent by calling the EFI SignalEvent() function. If | |
| FailedCpuList is not NULL, its content is available when WaitEvent is | |
| signaled. If all APs returned from Procedure prior to the timeout, then | |
| FailedCpuList is set to NULL. If not all APs return from Procedure before | |
| the timeout, then FailedCpuList is filled in with the list of the failed | |
| APs. The buffer is allocated by MP Service Protocol using AllocatePool(). | |
| It is the caller's responsibility to free the buffer with FreePool() service. | |
| -# This invocation of SignalEvent() function informs the caller that invoked | |
| EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed | |
| the specified task or a timeout occurred. The contents of FailedCpuList | |
| can be examined to determine which APs did not complete the specified task | |
| prior to the timeout. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[in] Procedure A pointer to the function to be run on | |
| enabled APs of the system. See type | |
| EFI_AP_PROCEDURE. | |
| @param[in] SingleThread If TRUE, then all the enabled APs execute | |
| the function specified by Procedure one by | |
| one, in ascending order of processor handle | |
| number. If FALSE, then all the enabled APs | |
| execute the function specified by Procedure | |
| simultaneously. | |
| @param[in] WaitEvent The event created by the caller with CreateEvent() | |
| service. If it is NULL, then execute in | |
| blocking mode. BSP waits until all APs finish | |
| or TimeoutInMicroseconds expires. If it's | |
| not NULL, then execute in non-blocking mode. | |
| BSP requests the function specified by | |
| Procedure to be started on all the enabled | |
| APs, and go on executing immediately. If | |
| all return from Procedure, or TimeoutInMicroseconds | |
| expires, this event is signaled. The BSP | |
| can use the CheckEvent() or WaitForEvent() | |
| services to check the state of event. Type | |
| EFI_EVENT is defined in CreateEvent() in | |
| the Unified Extensible Firmware Interface | |
| Specification. | |
| @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for | |
| APs to return from Procedure, either for | |
| blocking or non-blocking mode. Zero means | |
| infinity. If the timeout expires before | |
| all APs return from Procedure, then Procedure | |
| on the failed APs is terminated. All enabled | |
| APs are available for next function assigned | |
| by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| or EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). | |
| If the timeout expires in blocking mode, | |
| BSP returns EFI_TIMEOUT. If the timeout | |
| expires in non-blocking mode, WaitEvent | |
| is signaled with SignalEvent(). | |
| @param[in] ProcedureArgument The parameter passed into Procedure for | |
| all APs. | |
| @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise, | |
| if all APs finish successfully, then its | |
| content is set to NULL. If not all APs | |
| finish before timeout expires, then its | |
| content is set to address of the buffer | |
| holding handle numbers of the failed APs. | |
| The buffer is allocated by MP Service Protocol, | |
| and it's the caller's responsibility to | |
| free the buffer with FreePool() service. | |
| In blocking mode, it is ready for consumption | |
| when the call returns. In non-blocking mode, | |
| it is ready when WaitEvent is signaled. The | |
| list of failed CPU is terminated by | |
| END_OF_CPU_LIST. | |
| @retval EFI_SUCCESS In blocking mode, all APs have finished before | |
| the timeout expired. | |
| @retval EFI_SUCCESS In non-blocking mode, function has been dispatched | |
| to all enabled APs. | |
| @retval EFI_UNSUPPORTED A non-blocking mode request was made after the | |
| UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was | |
| signaled. | |
| @retval EFI_DEVICE_ERROR Caller processor is AP. | |
| @retval EFI_NOT_STARTED No enabled APs exist in the system. | |
| @retval EFI_NOT_READY Any enabled APs are busy. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before | |
| all enabled APs have finished. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| StartupAllAPs ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN BOOLEAN SingleThread, | |
| IN EFI_EVENT WaitEvent OPTIONAL, | |
| IN UINTN TimeoutInMicroseconds, | |
| IN VOID *ProcedureArgument OPTIONAL, | |
| OUT UINTN **FailedCpuList OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| CPU_DATA_BLOCK *CpuData; | |
| UINTN Number; | |
| CPU_STATE APInitialState; | |
| CpuData = NULL; | |
| if (FailedCpuList != NULL) { | |
| *FailedCpuList = NULL; | |
| } | |
| if (!IsBSP ()) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| if (mMpSystemData.NumberOfProcessors == 1) { | |
| return EFI_NOT_STARTED; | |
| } | |
| if (Procedure == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) { | |
| CpuData = &mMpSystemData.CpuDatas[Number]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| // | |
| // Skip BSP | |
| // | |
| continue; | |
| } | |
| if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| // | |
| // Skip Disabled processors | |
| // | |
| continue; | |
| } | |
| if (GetApState (CpuData) != CpuStateIdle) { | |
| return EFI_NOT_READY; | |
| } | |
| } | |
| // | |
| // temporarily stop checkAllAPsStatus for initialize parameters. | |
| // | |
| mStopCheckAllAPsStatus = TRUE; | |
| mMpSystemData.Procedure = Procedure; | |
| mMpSystemData.ProcedureArgument = ProcedureArgument; | |
| mMpSystemData.WaitEvent = WaitEvent; | |
| mMpSystemData.Timeout = TimeoutInMicroseconds; | |
| mMpSystemData.TimeoutActive = !!(TimeoutInMicroseconds); | |
| mMpSystemData.FinishCount = 0; | |
| mMpSystemData.StartCount = 0; | |
| mMpSystemData.SingleThread = SingleThread; | |
| mMpSystemData.FailedList = FailedCpuList; | |
| mMpSystemData.FailedListIndex = 0; | |
| APInitialState = CpuStateReady; | |
| for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) { | |
| CpuData = &mMpSystemData.CpuDatas[Number]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| // | |
| // Skip BSP | |
| // | |
| continue; | |
| } | |
| if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| // | |
| // Skip Disabled processors | |
| // | |
| continue; | |
| } | |
| // | |
| // Get APs prepared, and put failing APs into FailedCpuList | |
| // if "SingleThread", only 1 AP will put to ready state, other AP will be put to ready | |
| // state 1 by 1, until the previous 1 finished its task | |
| // if not "SingleThread", all APs are put to ready state from the beginning | |
| // | |
| if (GetApState (CpuData) == CpuStateIdle) { | |
| mMpSystemData.StartCount++; | |
| SetApState (CpuData, APInitialState); | |
| if (APInitialState == CpuStateReady) { | |
| SetApProcedure (CpuData, Procedure, ProcedureArgument); | |
| } | |
| if (SingleThread) { | |
| APInitialState = CpuStateBlocked; | |
| } | |
| } | |
| } | |
| mStopCheckAllAPsStatus = FALSE; | |
| if (WaitEvent != NULL) { | |
| // | |
| // non blocking | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| while (TRUE) { | |
| CheckAndUpdateAllAPsToIdleState (); | |
| if (mMpSystemData.FinishCount == mMpSystemData.StartCount) { | |
| Status = EFI_SUCCESS; | |
| goto Done; | |
| } | |
| // | |
| // task timeout | |
| // | |
| if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) { | |
| ResetAllFailedAPs(); | |
| Status = EFI_TIMEOUT; | |
| goto Done; | |
| } | |
| gBS->Stall (gPollInterval); | |
| mMpSystemData.Timeout -= gPollInterval; | |
| } | |
| Done: | |
| return Status; | |
| } | |
| /** | |
| This service lets the caller get one enabled AP to execute a caller-provided | |
| function. The caller can request the BSP to either wait for the completion | |
| of the AP or just proceed with the next task by using the EFI event mechanism. | |
| See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking | |
| execution support. This service may only be called from the BSP. | |
| This function is used to dispatch one enabled AP to the function specified by | |
| Procedure passing in the argument specified by ProcedureArgument. If WaitEvent | |
| is NULL, execution is in blocking mode. The BSP waits until the AP finishes or | |
| TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode. | |
| BSP proceeds to the next task without waiting for the AP. If a non-blocking mode | |
| is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, | |
| then EFI_UNSUPPORTED must be returned. | |
| If the timeout specified by TimeoutInMicroseconds expires before the AP returns | |
| from Procedure, then execution of Procedure by the AP is terminated. The AP is | |
| available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and | |
| EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[in] Procedure A pointer to the function to be run on | |
| enabled APs of the system. See type | |
| EFI_AP_PROCEDURE. | |
| @param[in] ProcessorNumber The handle number of the AP. The range is | |
| from 0 to the total number of logical | |
| processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @param[in] WaitEvent The event created by the caller with CreateEvent() | |
| service. If it is NULL, then execute in | |
| blocking mode. BSP waits until all APs finish | |
| or TimeoutInMicroseconds expires. If it's | |
| not NULL, then execute in non-blocking mode. | |
| BSP requests the function specified by | |
| Procedure to be started on all the enabled | |
| APs, and go on executing immediately. If | |
| all return from Procedure or TimeoutInMicroseconds | |
| expires, this event is signaled. The BSP | |
| can use the CheckEvent() or WaitForEvent() | |
| services to check the state of event. Type | |
| EFI_EVENT is defined in CreateEvent() in | |
| the Unified Extensible Firmware Interface | |
| Specification. | |
| @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for | |
| APs to return from Procedure, either for | |
| blocking or non-blocking mode. Zero means | |
| infinity. If the timeout expires before | |
| all APs return from Procedure, then Procedure | |
| on the failed APs is terminated. All enabled | |
| APs are available for next function assigned | |
| by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| or EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). | |
| If the timeout expires in blocking mode, | |
| BSP returns EFI_TIMEOUT. If the timeout | |
| expires in non-blocking mode, WaitEvent | |
| is signaled with SignalEvent(). | |
| @param[in] ProcedureArgument The parameter passed into Procedure for | |
| all APs. | |
| @param[out] Finished If NULL, this parameter is ignored. In | |
| blocking mode, this parameter is ignored. | |
| In non-blocking mode, if AP returns from | |
| Procedure before the timeout expires, its | |
| content is set to TRUE. Otherwise, the | |
| value is set to FALSE. The caller can | |
| determine if the AP returned from Procedure | |
| by evaluating this value. | |
| @retval EFI_SUCCESS In blocking mode, specified AP finished before | |
| the timeout expires. | |
| @retval EFI_SUCCESS In non-blocking mode, the function has been | |
| dispatched to specified AP. | |
| @retval EFI_UNSUPPORTED A non-blocking mode request was made after the | |
| UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was | |
| signaled. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before | |
| the specified AP has finished. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| StartupThisAP ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN UINTN ProcessorNumber, | |
| IN EFI_EVENT WaitEvent OPTIONAL, | |
| IN UINTN TimeoutInMicroseconds, | |
| IN VOID *ProcedureArgument OPTIONAL, | |
| OUT BOOLEAN *Finished OPTIONAL | |
| ) | |
| { | |
| CPU_DATA_BLOCK *CpuData; | |
| CpuData = NULL; | |
| if (Finished != NULL) { | |
| *Finished = FALSE; | |
| } | |
| if (!IsBSP ()) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| if (Procedure == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) { | |
| return EFI_NOT_FOUND; | |
| } | |
| CpuData = &mMpSystemData.CpuDatas[ProcessorNumber]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT) || | |
| !TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (GetApState (CpuData) != CpuStateIdle) { | |
| return EFI_NOT_READY; | |
| } | |
| // | |
| // temporarily stop checkAllAPsStatus for initialize parameters. | |
| // | |
| mStopCheckAllAPsStatus = TRUE; | |
| SetApState (CpuData, CpuStateReady); | |
| SetApProcedure (CpuData, Procedure, ProcedureArgument); | |
| CpuData->Timeout = TimeoutInMicroseconds; | |
| CpuData->WaitEvent = WaitEvent; | |
| CpuData->TimeoutActive = !!(TimeoutInMicroseconds); | |
| CpuData->Finished = Finished; | |
| mStopCheckAllAPsStatus = FALSE; | |
| if (WaitEvent != NULL) { | |
| // | |
| // Non Blocking | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Blocking | |
| // | |
| while (TRUE) { | |
| if (GetApState (CpuData) == CpuStateFinished) { | |
| SetApState (CpuData, CpuStateIdle); | |
| break; | |
| } | |
| if (CpuData->TimeoutActive && CpuData->Timeout < 0) { | |
| ResetProcessorToIdleState (CpuData); | |
| return EFI_TIMEOUT; | |
| } | |
| gBS->Stall (gPollInterval); | |
| CpuData->Timeout -= gPollInterval; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. This call can only be performed | |
| by the current BSP. | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. The new BSP can take over the | |
| execution of the old BSP and continue seamlessly from where the old one left | |
| off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT | |
| is signaled. | |
| If the BSP cannot be switched prior to the return from this service, then | |
| EFI_UNSUPPORTED must be returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. | |
| @param[in] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an | |
| enabled AP. Otherwise, it will be disabled. | |
| @retval EFI_SUCCESS BSP successfully switched. | |
| @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to | |
| this service returning. | |
| @retval EFI_UNSUPPORTED Switching the BSP is not supported. | |
| @retval EFI_SUCCESS The calling processor is an AP. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or | |
| a disabled AP. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SwitchBSP ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableOldBSP | |
| ) | |
| { | |
| // | |
| // Current always return unsupported. | |
| // | |
| return EFI_UNSUPPORTED; | |
| } | |
| /** | |
| This service lets the caller enable or disable an AP from this point onward. | |
| This service may only be called from the BSP. | |
| This service allows the caller enable or disable an AP from this point onward. | |
| The caller can optionally specify the health status of the AP by Health. If | |
| an AP is being disabled, then the state of the disabled AP is implementation | |
| dependent. If an AP is enabled, then the implementation must guarantee that a | |
| complete initialization sequence is performed on the AP, so the AP is in a state | |
| that is compatible with an MP operating system. This service may not be supported | |
| after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. | |
| If the enable or disable AP operation cannot be completed prior to the return | |
| from this service, then EFI_UNSUPPORTED must be returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. | |
| @param[in] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @param[in] EnableAP Specifies the new state for the processor for | |
| enabled, FALSE for disabled. | |
| @param[in] HealthFlag If not NULL, a pointer to a value that specifies | |
| the new health status of the AP. This flag | |
| corresponds to StatusFlag defined in | |
| EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only | |
| the PROCESSOR_HEALTH_STATUS_BIT is used. All other | |
| bits are ignored. If it is NULL, this parameter | |
| is ignored. | |
| @retval EFI_SUCCESS The specified AP was enabled or disabled successfully. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed | |
| prior to this service returning. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber | |
| does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EnableDisableAP ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableAP, | |
| IN UINT32 *HealthFlag OPTIONAL | |
| ) | |
| { | |
| CPU_DATA_BLOCK *CpuData; | |
| if (!IsBSP ()) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) { | |
| return EFI_NOT_FOUND; | |
| } | |
| CpuData = &mMpSystemData.CpuDatas[ProcessorNumber]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (GetApState (CpuData) != CpuStateIdle) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| if (EnableAP) { | |
| if (!(TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT))) { | |
| mMpSystemData.NumberOfEnabledProcessors++; | |
| } | |
| CpuStatusFlagOr (CpuData, PROCESSOR_ENABLED_BIT); | |
| } else { | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| mMpSystemData.NumberOfEnabledProcessors--; | |
| } | |
| CpuStatusFlagAndNot (CpuData, PROCESSOR_ENABLED_BIT); | |
| } | |
| if (HealthFlag != NULL) { | |
| CpuStatusFlagAndNot (CpuData, (UINT32)~PROCESSOR_HEALTH_STATUS_BIT); | |
| CpuStatusFlagOr (CpuData, (*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT)); | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| This return the handle number for the calling processor. This service may be | |
| called from the BSP and APs. | |
| This service returns the processor handle number for the calling processor. | |
| The returned value is in the range from 0 to the total number of logical | |
| processors minus 1. The total number of logical processors can be retrieved | |
| with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be | |
| called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER | |
| is returned. Otherwise, the current processors handle number is returned in | |
| ProcessorNumber, and EFI_SUCCESS is returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. | |
| @param[out] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @retval EFI_SUCCESS The current processor handle number was returned | |
| in ProcessorNumber. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| WhoAmI ( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| OUT UINTN *ProcessorNumber | |
| ) | |
| { | |
| UINTN Index; | |
| UINT32 ProcessorId; | |
| if (ProcessorNumber == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| ProcessorId = GetApicId (); | |
| for (Index = 0; Index < mMpSystemData.NumberOfProcessors; Index++) { | |
| if (mMpSystemData.CpuDatas[Index].Info.ProcessorId == ProcessorId) { | |
| break; | |
| } | |
| } | |
| *ProcessorNumber = Index; | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Terminate AP's task and set it to idle state. | |
| This function terminates AP's task due to timeout by sending INIT-SIPI, | |
| and sends it to idle state. | |
| @param CpuData the pointer to CPU_DATA_BLOCK of specified AP | |
| **/ | |
| VOID | |
| ResetProcessorToIdleState ( | |
| IN CPU_DATA_BLOCK *CpuData | |
| ) | |
| { | |
| } | |
| /** | |
| Application Processors do loop routine | |
| after switch to its own stack. | |
| @param Context1 A pointer to the context to pass into the function. | |
| @param Context2 A pointer to the context to pass into the function. | |
| **/ | |
| VOID | |
| ProcessorToIdleState ( | |
| IN VOID *Context1, OPTIONAL | |
| IN VOID *Context2 OPTIONAL | |
| ) | |
| { | |
| UINTN ProcessorNumber; | |
| CPU_DATA_BLOCK *CpuData; | |
| EFI_AP_PROCEDURE Procedure; | |
| VOID *ProcedureArgument; | |
| WhoAmI (&mMpServicesTemplate, &ProcessorNumber); | |
| CpuData = &mMpSystemData.CpuDatas[ProcessorNumber]; | |
| AsmApDoneWithCommonStack (); | |
| while (TRUE) { | |
| GetMpSpinLock (CpuData); | |
| ProcedureArgument = CpuData->Parameter; | |
| Procedure = CpuData->Procedure; | |
| ReleaseMpSpinLock (CpuData); | |
| if (Procedure != NULL) { | |
| Procedure (ProcedureArgument); | |
| GetMpSpinLock (CpuData); | |
| CpuData->Procedure = NULL; | |
| CpuData->State = CpuStateFinished; | |
| ReleaseMpSpinLock (CpuData); | |
| } | |
| CpuPause (); | |
| } | |
| CpuSleep (); | |
| CpuDeadLoop (); | |
| } | |
| /** | |
| Checks AP' status periodically. | |
| This function is triggerred by timer perodically to check the | |
| state of AP forStartupThisAP() executed in non-blocking mode. | |
| @param Event Event triggered. | |
| @param Context Parameter passed with the event. | |
| **/ | |
| VOID | |
| EFIAPI | |
| CheckThisAPStatus ( | |
| IN EFI_EVENT Event, | |
| IN VOID *Context | |
| ) | |
| { | |
| CPU_DATA_BLOCK *CpuData; | |
| CPU_STATE CpuState; | |
| CpuData = (CPU_DATA_BLOCK *) Context; | |
| if (CpuData->TimeoutActive) { | |
| CpuData->Timeout -= gPollInterval; | |
| } | |
| CpuState = GetApState (CpuData); | |
| if (CpuState == CpuStateFinished) { | |
| if (CpuData->Finished) { | |
| *CpuData->Finished = TRUE; | |
| } | |
| SetApState (CpuData, CpuStateIdle); | |
| goto out; | |
| } | |
| if (CpuData->TimeoutActive && CpuData->Timeout < 0) { | |
| if (CpuState != CpuStateIdle && | |
| CpuData->Finished) { | |
| *CpuData->Finished = FALSE; | |
| } | |
| ResetProcessorToIdleState (CpuData); | |
| goto out; | |
| } | |
| return; | |
| out: | |
| CpuData->TimeoutActive = FALSE; | |
| gBS->SignalEvent (CpuData->WaitEvent); | |
| CpuData->WaitEvent = NULL; | |
| } | |
| /** | |
| Checks APs' status periodically. | |
| This function is triggerred by timer perodically to check the | |
| state of APs for StartupAllAPs() executed in non-blocking mode. | |
| @param Event Event triggered. | |
| @param Context Parameter passed with the event. | |
| **/ | |
| VOID | |
| EFIAPI | |
| CheckAllAPsStatus ( | |
| IN EFI_EVENT Event, | |
| IN VOID *Context | |
| ) | |
| { | |
| CPU_DATA_BLOCK *CpuData; | |
| UINTN Number; | |
| EFI_STATUS Status; | |
| if (mMpSystemData.TimeoutActive) { | |
| mMpSystemData.Timeout -= gPollInterval; | |
| } | |
| if (mStopCheckAllAPsStatus) { | |
| return; | |
| } | |
| // | |
| // avoid next timer enter. | |
| // | |
| Status = gBS->SetTimer ( | |
| mMpSystemData.CheckAllAPsEvent, | |
| TimerCancel, | |
| 0 | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| if (mMpSystemData.WaitEvent != NULL) { | |
| CheckAndUpdateAllAPsToIdleState (); | |
| // | |
| // task timeout | |
| // | |
| if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) { | |
| ResetAllFailedAPs(); | |
| // | |
| // force exit | |
| // | |
| mMpSystemData.FinishCount = mMpSystemData.StartCount; | |
| } | |
| if (mMpSystemData.FinishCount != mMpSystemData.StartCount) { | |
| goto EXIT; | |
| } | |
| mMpSystemData.TimeoutActive = FALSE; | |
| gBS->SignalEvent (mMpSystemData.WaitEvent); | |
| mMpSystemData.WaitEvent = NULL; | |
| mStopCheckAllAPsStatus = TRUE; | |
| goto EXIT; | |
| } | |
| // | |
| // check each AP status for StartupThisAP | |
| // | |
| for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) { | |
| CpuData = &mMpSystemData.CpuDatas[Number]; | |
| if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) { | |
| // | |
| // Skip BSP | |
| // | |
| continue; | |
| } | |
| if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) { | |
| // | |
| // Skip Disabled processors | |
| // | |
| continue; | |
| } | |
| if (CpuData->WaitEvent) { | |
| CheckThisAPStatus (NULL, (VOID *)CpuData); | |
| } | |
| } | |
| EXIT: | |
| Status = gBS->SetTimer ( | |
| mMpSystemData.CheckAllAPsEvent, | |
| TimerPeriodic, | |
| EFI_TIMER_PERIOD_MICROSECONDS (100) | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| /** | |
| Application Processor C code entry point. | |
| **/ | |
| VOID | |
| EFIAPI | |
| ApEntryPointInC ( | |
| VOID | |
| ) | |
| { | |
| VOID* TopOfApStack; | |
| FillInProcessorInformation (FALSE, mMpSystemData.NumberOfProcessors); | |
| TopOfApStack = (UINT8*)mApStackStart + gApStackSize; | |
| mApStackStart = TopOfApStack; | |
| mMpSystemData.NumberOfProcessors++; | |
| SwitchStack ( | |
| (SWITCH_STACK_ENTRY_POINT)(UINTN)ProcessorToIdleState, | |
| NULL, | |
| NULL, | |
| TopOfApStack); | |
| } | |
| /** | |
| This function is called by all processors (both BSP and AP) once and collects MP related data. | |
| @param Bsp TRUE if the CPU is BSP | |
| @param ProcessorNumber The specific processor number | |
| @retval EFI_SUCCESS Data for the processor collected and filled in | |
| **/ | |
| EFI_STATUS | |
| FillInProcessorInformation ( | |
| IN BOOLEAN Bsp, | |
| IN UINTN ProcessorNumber | |
| ) | |
| { | |
| CPU_DATA_BLOCK *CpuData; | |
| UINT32 ProcessorId; | |
| CpuData = &mMpSystemData.CpuDatas[ProcessorNumber]; | |
| ProcessorId = GetApicId (); | |
| CpuData->Info.ProcessorId = ProcessorId; | |
| CpuData->Info.StatusFlag = PROCESSOR_ENABLED_BIT | PROCESSOR_HEALTH_STATUS_BIT; | |
| if (Bsp) { | |
| CpuData->Info.StatusFlag |= PROCESSOR_AS_BSP_BIT; | |
| } | |
| CpuData->Info.Location.Package = ProcessorId; | |
| CpuData->Info.Location.Core = 0; | |
| CpuData->Info.Location.Thread = 0; | |
| CpuData->State = Bsp ? CpuStateBuzy : CpuStateIdle; | |
| CpuData->Procedure = NULL; | |
| CpuData->Parameter = NULL; | |
| InitializeSpinLock (&CpuData->CpuDataLock); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Prepare the System Data. | |
| @retval EFI_SUCCESS the System Data finished initilization. | |
| **/ | |
| EFI_STATUS | |
| InitMpSystemData ( | |
| VOID | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| ZeroMem (&mMpSystemData, sizeof (MP_SYSTEM_DATA)); | |
| mMpSystemData.NumberOfProcessors = 1; | |
| mMpSystemData.NumberOfEnabledProcessors = 1; | |
| mMpSystemData.CpuDatas = AllocateZeroPool (sizeof (CPU_DATA_BLOCK) * gMaxLogicalProcessorNumber); | |
| ASSERT(mMpSystemData.CpuDatas != NULL); | |
| Status = gBS->CreateEvent ( | |
| EVT_TIMER | EVT_NOTIFY_SIGNAL, | |
| TPL_CALLBACK, | |
| CheckAllAPsStatus, | |
| NULL, | |
| &mMpSystemData.CheckAllAPsEvent | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| // | |
| // Set timer to check all APs status. | |
| // | |
| Status = gBS->SetTimer ( | |
| mMpSystemData.CheckAllAPsEvent, | |
| TimerPeriodic, | |
| EFI_TIMER_PERIOD_MICROSECONDS (100) | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| // | |
| // BSP | |
| // | |
| FillInProcessorInformation (TRUE, 0); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Initialize Multi-processor support. | |
| **/ | |
| VOID | |
| InitializeMpSupport ( | |
| VOID | |
| ) | |
| { | |
| gMaxLogicalProcessorNumber = (UINTN) PcdGet32 (PcdCpuMaxLogicalProcessorNumber); | |
| if (gMaxLogicalProcessorNumber < 1) { | |
| DEBUG ((DEBUG_ERROR, "Setting PcdCpuMaxLogicalProcessorNumber should be more than zero.\n")); | |
| return; | |
| } | |
| if (gMaxLogicalProcessorNumber == 1) { | |
| return; | |
| } | |
| gApStackSize = (UINTN) PcdGet32 (PcdCpuApStackSize); | |
| ASSERT ((gApStackSize & (SIZE_4KB - 1)) == 0); | |
| mApStackStart = AllocatePages (EFI_SIZE_TO_PAGES (gMaxLogicalProcessorNumber * gApStackSize)); | |
| ASSERT (mApStackStart != NULL); | |
| // | |
| // the first buffer of stack size used for common stack, when the amount of AP | |
| // more than 1, we should never free the common stack which maybe used for AP reset. | |
| // | |
| mCommonStack = mApStackStart; | |
| mTopOfApCommonStack = (UINT8*) mApStackStart + gApStackSize; | |
| mApStackStart = mTopOfApCommonStack; | |
| InitMpSystemData (); | |
| PrepareAPStartupCode (); | |
| if (mMpSystemData.NumberOfProcessors == 1) { | |
| FreeApStartupCode (); | |
| FreePages (mCommonStack, EFI_SIZE_TO_PAGES (gMaxLogicalProcessorNumber * gApStackSize)); | |
| return; | |
| } | |
| if (mMpSystemData.NumberOfProcessors < gMaxLogicalProcessorNumber) { | |
| FreePages (mApStackStart, EFI_SIZE_TO_PAGES ( | |
| (gMaxLogicalProcessorNumber - mMpSystemData.NumberOfProcessors) * | |
| gApStackSize)); | |
| } | |
| } |