SecurityPkg/SecurityPkg.dec

## @file  SecurityPkg.dec
#  Provides security features that conform to TCG/UEFI industry standards
#
#  The security features include secure boot, measured boot and user identification.
#  It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
#  and libraries instances, which are used for those features.
#
# Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
# (C) Copyright 2015 Hewlett Packard Enterprise Development LP <BR>
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License which accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##

[Defines]
  DEC_SPECIFICATION              = 0x00010005
  PACKAGE_NAME                   = SecurityPkg
  PACKAGE_UNI_FILE               = SecurityPkg.uni
  PACKAGE_GUID                   = 4EFC4F66-6219-4427-B780-FB99F470767F
  PACKAGE_VERSION                = 0.96

[Includes]
  Include

[LibraryClasses]
  ##  @libraryclass  Provides hash interfaces from different implementations.
  # 
  HashLib|Include/Library/HashLib.h
  
  ##  @libraryclass  Provides a platform specific interface to detect physically present user.
  #
  PlatformSecureLib|Include/Library/PlatformSecureLib.h
  
  ##  @libraryclass  Provides interfaces to handle TPM 1.2 request.
  #
  TcgPhysicalPresenceLib|Include/Library/TcgPhysicalPresenceLib.h
  
  ##  @libraryclass  Provides support for TCG PP >= 128 Vendor Specific PPI Operation.
  #
  TcgPpVendorLib|Include/Library/TcgPpVendorLib.h
  
  ##  @libraryclass  Provides interfaces for other modules to send TPM 2.0 command.
  #
  Tpm2CommandLib|Include/Library/Tpm2CommandLib.h
  
  ##  @libraryclass  Provides interfaces on how to access TPM 2.0 hardware device.
  #
  Tpm2DeviceLib|Include/Library/Tpm2DeviceLib.h
  
  ##  @libraryclass  Provides interfaces for other modules to send TPM 1.2 command.
  #
  Tpm12CommandLib|Include/Library/Tpm12CommandLib.h
  
  ##  @libraryclass  Provides interfaces on how to access TPM 1.2 hardware device.
  #
  Tpm12DeviceLib|Include/Library/Tpm12DeviceLib.h
  
  ##  @libraryclass  Provides TPM Interface Specification (TIS) interfaces for TPM command.
  #
  TpmCommLib|Include/Library/TpmCommLib.h
  
  ##  @libraryclass  Provides interfaces to handle TPM 2.0 request.
  #
  TrEEPhysicalPresenceLib|Include/Library/TrEEPhysicalPresenceLib.h
  
  ##  @libraryclass  Provides support for TrEE PP >= 128 Vendor Specific PPI Operation.
  #
  TrEEPpVendorLib|Include/Library/TrEEPpVendorLib.h
  
  ##  @libraryclass  Provides support for TCG Physical Presence Interface (PPI) specification 
  #   >= 128 Vendor Specific PPI Operation.
  #
  Tcg2PpVendorLib|Include/Library/TcgPpVendorLib.h
  
  ##  @libraryclass  Handle TPM 2.0 physical presence request from OS.
  #
  Tcg2PhysicalPresenceLib|Include/Library/Tcg2PhysicalPresenceLib.h

[Guids]
  ## Security package token space guid.
  # Include/Guid/SecurityPkgTokenSpace.h
  gEfiSecurityPkgTokenSpaceGuid      = { 0xd3fb176, 0x9569, 0x4d51, { 0xa3, 0xef, 0x7d, 0x61, 0xc6, 0x4f, 0xea, 0xba }}

  ## GUID used to "SecureBootEnable" variable for the Secure Boot feature enable/disable.
  #  This variable is used for allowing a physically present user to disable Secure Boot via firmware setup without the possession of PKpriv.
  #  Include/Guid/AuthenticatedVariableFormat.h
  gEfiSecureBootEnableDisableGuid    = { 0xf0a30bc7, 0xaf08, 0x4556, { 0x99, 0xc4, 0x0, 0x10, 0x9, 0xc9, 0x3a, 0x44 } }

  ## GUID used to "CustomMode" variable for two Secure Boot modes feature: "Custom" and "Standard".
  #  Standard Secure Boot mode is the default mode as UEFI Spec's description.
  #  Custom Secure Boot mode allows for more flexibility as specified in the following:
  #  Can enroll or delete PK without existing PK's private key.
  #  Can enroll or delete KEK without existing PK's private key.
  #  Can enroll or delete signature from DB/DBX without KEK's private key.
  #  Include/Guid/AuthenticatedVariableFormat.h
  gEfiCustomModeEnableGuid           = { 0xc076ec0c, 0x7028, 0x4399, { 0xa0, 0x72, 0x71, 0xee, 0x5c, 0x44, 0x8b, 0x9f } }

  ## GUID used to "VendorKeysNv" variable to record the out of band secure boot keys modification.
  #  This variable is a read-only NV variable that indicates whether someone other than the platform vendor has used a 
  #  mechanism not defined by the UEFI Specification to transition the system to setup mode or to update secure boot keys.
  #  Include/Guid/AuthenticatedVariableFormat.h
  gEfiVendorKeysNvGuid               = { 0x9073e4e0, 0x60ec, 0x4b6e, { 0x99, 0x3, 0x4c, 0x22, 0x3c, 0x26, 0xf, 0x3c } }

  ## GUID used to "certdb" variable to store the signer's certificates for common variables with EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute.
  #  Include/Guid/AuthenticatedVariableFormat.h
  gEfiCertDbGuid                     = { 0xd9bee56e, 0x75dc, 0x49d9, { 0xb4, 0xd7, 0xb5, 0x34, 0x21, 0xf, 0x63, 0x7a } }
  
  ## Hob GUID used to pass a TCG_PCR_EVENT from a TPM PEIM to a TPM DXE Driver.
  #  Include/Guid/TcgEventHob.h
  gTcgEventEntryHobGuid              = { 0x2b9ffb52, 0x1b13, 0x416f, { 0xa8, 0x7b, 0xbc, 0x93, 0xd, 0xef, 0x92, 0xa8 }}

  ## Hob GUID used to pass a TCG_PCR_EVENT_2 from a TPM2 PEIM to a TPM2 DXE Driver.
  ## Include/Guid/TcgEventHob.h
  gTcgEvent2EntryHobGuid             = { 0xd26c221e, 0x2430, 0x4c8a, { 0x91, 0x70, 0x3f, 0xcb, 0x45, 0x0, 0x41, 0x3f }}

  ## HOB GUID used to record TPM device error.
  #  Include/Guid/TcgEventHob.h
  gTpmErrorHobGuid                   = { 0xef598499, 0xb25e, 0x473a, { 0xbf, 0xaf, 0xe7, 0xe5, 0x7d, 0xce, 0x82, 0xc4 }}

  ## HOB GUID used to pass all PEI measured FV info to DXE Driver.
  #  Include/Guid/MeasuredFvHob.h
  gMeasuredFvHobGuid                 = { 0xb2360b42, 0x7173, 0x420a, { 0x86, 0x96, 0x46, 0xca, 0x6b, 0xab, 0x10, 0x60 }}

  ## GUID used to "PhysicalPresence" variable and "PhysicalPresenceFlags" variable for TPM request and response.
  #  Include/Guid/PhysicalPresenceData.h
  gEfiPhysicalPresenceGuid           = { 0xf6499b1, 0xe9ad, 0x493d, { 0xb9, 0xc2, 0x2f, 0x90, 0x81, 0x5c, 0x6c, 0xbc }}
  
  ## GUID used to "Tcg2PhysicalPresence" variable and "Tcg2PhysicalPresenceFlags" variable for TPM2 request and response.
  #  Include/Guid/Tcg2PhysicalPresenceData.h
  gEfiTcg2PhysicalPresenceGuid = { 0xaeb9c5c1, 0x94f1, 0x4d02, { 0xbf, 0xd9, 0x46, 0x2, 0xdb, 0x2d, 0x3c, 0x54 }}

  ## GUID used for form browser, password credential and provider identifier.
  # Include/Guid/PwdCredentialProviderHii.h
  gPwdCredentialProviderGuid         = { 0x78b9ec8b, 0xc000, 0x46c5, { 0xac, 0x93, 0x24, 0xa0, 0xc1, 0xbb, 0x0, 0xce }}

  ## GUID used for form browser, USB credential and provider identifier.
  #  Include/Guid/UsbCredentialProviderHii.h
  gUsbCredentialProviderGuid         = { 0xd0849ed1, 0xa88c, 0x4ba6, { 0xb1, 0xd6, 0xab, 0x50, 0xe2, 0x80, 0xb7, 0xa9 }}

  ## GUID used for FormSet guid and user profile variable.
  # Include/Guid/UserIdentifyManagerHii.h
  gUserIdentifyManagerGuid           = { 0x3ccd3dd8, 0x8d45, 0x4fed, { 0x96, 0x2d, 0x2b, 0x38, 0xcd, 0x82, 0xb3, 0xc4 }}

  ## GUID used for FormSet.
  #  Include/Guid/UserProfileManagerHii.h
  gUserProfileManagerGuid            = { 0xc35f272c, 0x97c2, 0x465a, { 0xa2, 0x16, 0x69, 0x6b, 0x66, 0x8a, 0x8c, 0xfe }}

  ## GUID used for FormSet.
  #  Include/Guid/TcgConfigHii.h
  gTcgConfigFormSetGuid              = { 0xb0f901e4, 0xc424, 0x45de, { 0x90, 0x81, 0x95, 0xe2, 0xb, 0xde, 0x6f, 0xb5 }}
  
  ## GUID used for FormSet and config variable.
  #  Include/Guid/Tcg2ConfigHii.h
  gTcg2ConfigFormSetGuid    = {0x6339d487, 0x26ba, 0x424b, { 0x9a, 0x5d, 0x68, 0x7e, 0x25, 0xd7, 0x40, 0xbc }}
  
  ## GUID used for FormSet.
  #  Include/Guid/SecureBootConfigHii.h
  gSecureBootConfigFormSetGuid       = { 0x5daf50a5, 0xea81, 0x4de2, {0x8f, 0x9b, 0xca, 0xbd, 0xa9, 0xcf, 0x5c, 0x14}}

  ## GUID used to "TrEEPhysicalPresence" variable and "TrEEPhysicalPresenceFlags" variable for TPM2 request and response.
  #  Include/Guid/TrEEPhysicalPresenceData.h
  gEfiTrEEPhysicalPresenceGuid = { 0xf24643c2, 0xc622, 0x494e, { 0x8a, 0xd, 0x46, 0x32, 0x57, 0x9c, 0x2d, 0x5b }}

  ## GUID value used for PcdTpmInstanceGuid to indicate TPM is disabled.
  #  Include/Guid/TpmInstance.h
  gEfiTpmDeviceInstanceNoneGuid      = { 0x00000000, 0x0000, 0x0000, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } }
  
  ## GUID value used for PcdTpmInstanceGuid to indicate TPM 1.2 device is selected to support.
  #  Include/Guid/TpmInstance.h
  gEfiTpmDeviceInstanceTpm12Guid     = { 0x8b01e5b6, 0x4f19, 0x46e8, { 0xab, 0x93, 0x1c, 0x53, 0x67, 0x1b, 0x90, 0xcc } }
  
  ## GUID value used for PcdTpmInstanceGuid to indicate discrete TPM 2.0 device is selected to support.
  #  Include/Guid/TpmInstance.h
  gEfiTpmDeviceInstanceTpm20DtpmGuid = { 0x286bf25a, 0xc2c3, 0x408c, { 0xb3, 0xb4, 0x25, 0xe6, 0x75, 0x8b, 0x73, 0x17 } }
  
  ## GUID used to select supported TPM instance from UI.
  #  Include/Guid/TpmInstance.h
  gEfiTpmDeviceSelectedGuid          = { 0x7f4158d3, 0x74d, 0x456d, { 0x8c, 0xb2, 0x1, 0xf9, 0xc8, 0xf7, 0x9d, 0xaa } }

  ## GUID used for FormSet and config variable.
  #  Include/Guid/TrEEConfigHii.h
  gTrEEConfigFormSetGuid              = {0xc54b425f, 0xaa79, 0x48b4, { 0x98, 0x1f, 0x99, 0x8b, 0x3c, 0x4b, 0x64, 0x1c }}

[Ppis]
  ## The PPI GUID for that TPM physical presence should be locked.
  # Include/Ppi/LockPhysicalPresence.h
  gPeiLockPhysicalPresencePpiGuid    = { 0xef9aefe5, 0x2bd3, 0x4031, { 0xaf, 0x7d, 0x5e, 0xfe, 0x5a, 0xbb, 0x9a, 0xd } }

  ## The PPI GUID for that TPM is initialized.
  # Include/Ppi/TpmInitialized.h
  gPeiTpmInitializedPpiGuid      = { 0xe9db0d58, 0xd48d, 0x47f6, { 0x9c, 0x6e, 0x6f, 0x40, 0xe8, 0x6c, 0x7b, 0x41 }}

  ## The PPI GUID for that TPM initialization is done. TPM initialization may be success or fail.
  # Include/Ppi/TpmInitialized.h
  gPeiTpmInitializationDonePpiGuid = { 0xa030d115, 0x54dd, 0x447b, { 0x90, 0x64, 0xf2, 0x6, 0x88, 0x3d, 0x7c, 0xcc }}

  ## Include/Ppi/FirmwareVolumeInfoMeasurementExcluded.h
  gEfiPeiFirmwareVolumeInfoMeasurementExcludedPpiGuid = { 0x6e056ff9, 0xc695, 0x4364, { 0x9e, 0x2c, 0x61, 0x26, 0xf5, 0xce, 0xea, 0xae } }

#
# [Error.gEfiSecurityPkgTokenSpaceGuid]
#   0x80000001 | Invalid value provided.
#   0x80000002 | Reserved bits must be set to zero.
#   0x80000003 | Incorrect progress or error code provided.
#

[PcdsFixedAtBuild, PcdsPatchableInModule]
  ## Image verification policy for OptionRom. Only following values are valid:<BR><BR>
  #  NOTE: Do NOT use 0x5 and 0x2 since it violates the UEFI specification and has been removed.<BR>
  #  0x00000000      Always trust the image.<BR>
  #  0x00000001      Never trust the image.<BR>
  #  0x00000002      Allow execution when there is security violation.<BR>
  #  0x00000003      Defer execution when there is security violation.<BR>
  #  0x00000004      Deny execution when there is security violation.<BR>
  #  0x00000005      Query user when there is security violation.<BR>
  # @Prompt Set policy for the image from OptionRom.
  # @ValidRange 0x80000001 | 0x00000000 - 0x00000005
  gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04|UINT32|0x00000001

  ## Image verification policy for removable media which includes CD-ROM, Floppy, USB and network.
  #  Only following values are valid:<BR><BR>
  #  NOTE: Do NOT use 0x5 and 0x2 since it violates the UEFI specification and has been removed.<BR>
  #  0x00000000      Always trust the image.<BR>
  #  0x00000001      Never trust the image.<BR>
  #  0x00000002      Allow execution when there is security violation.<BR>
  #  0x00000003      Defer execution when there is security violation.<BR>
  #  0x00000004      Deny execution when there is security violation.<BR>
  #  0x00000005      Query user when there is security violation.<BR>
  # @Prompt Set policy for the image from removable media.
  # @ValidRange 0x80000001 | 0x00000000 - 0x00000005
  gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04|UINT32|0x00000002

  ## Image verification policy for fixed media which includes hard disk.
  #  Only following values are valid:<BR><BR>
  #  NOTE: Do NOT use 0x5 and 0x2 since it violates the UEFI specification and has been removed.<BR>
  #  0x00000000      Always trust the image.<BR>
  #  0x00000001      Never trust the image.<BR>
  #  0x00000002      Allow execution when there is security violation.<BR>
  #  0x00000003      Defer execution when there is security violation.<BR>
  #  0x00000004      Deny execution when there is security violation.<BR>
  #  0x00000005      Query user when there is security violation.<BR>
  # @Prompt Set policy for the image from fixed media.
  # @ValidRange 0x80000001 | 0x00000000 - 0x00000005 
  gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04|UINT32|0x00000003

  ## Defer Image Load policy settings. The policy is bitwise. 
  #  If a bit is set, the image from corresponding device will be trusted when loading. Or  
  #  the image will be deferred. The deferred image will be checked after user is identified.<BR><BR>
  #    BIT0       - Image from unknown device. <BR>
  #    BIT1       - Image from firmware volume.<BR>
  #    BIT2       - Image from OptionRom.<BR>
  #    BIT3       - Image from removable media which includes CD-ROM, Floppy, USB and network.<BR>
  #    BIT4       - Image from fixed media device which includes hard disk.<BR>
  # @Prompt Set policy whether trust image before user identification.
  # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F 
  gEfiSecurityPkgTokenSpaceGuid.PcdDeferImageLoadPolicy|0x0000001F|UINT32|0x0000004

  ## Null-terminated Unicode string of the file name that is the default name to save USB credential.
  #  The specified file should be saved at the root directory of USB storage disk.
  # @Prompt File name to save credential.
  gEfiSecurityPkgTokenSpaceGuid.PcdFixedUsbCredentialProviderTokenFileName|L"Token.bin"|VOID*|0x00000005

  ## The size of Append variable buffer. This buffer is reserved for runtime use, OS can append data into one existing variable.
  #  Note: This PCD is not been used.
  # @Prompt Max variable size for append operation.
  gEfiSecurityPkgTokenSpaceGuid.PcdMaxAppendVariableSize|0x2000|UINT32|0x30000005  

  ## Specifies the type of TCG platform that contains TPM chip.<BR><BR>
  #  If 0, TCG platform type is PC client.<BR>
  #  If 1, TCG platform type is PC server.<BR>
  # @Prompt Select platform type.
  # @ValidRange 0x80000001 | 0x00 - 0x1 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmPlatformClass|0|UINT8|0x00000006
  
  ## Progress Code for TPM device subclass definitions.<BR><BR>
  #  EFI_PERIPHERAL_TPM  = (EFI_PERIPHERAL | 0x000D0000) = 0x010D0000<BR>
  # @Prompt Status Code for TPM device definitions
  # @ValidList  0x80000003 | 0x010D0000
  gEfiSecurityPkgTokenSpaceGuid.PcdStatusCodeSubClassTpmDevice|0x010D0000|UINT32|0x00000007

[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  ## Indicates the presence or absence of the platform operator during firmware booting.
  #  If platform operator is not physical presence during boot. TPM will be locked and the TPM commands 
  #  that required operator physical presence can not run.<BR><BR>
  #   TRUE  - The platform operator is physically present.<BR>
  #   FALSE - The platform operator is not physically present.<BR>
  # @Prompt Physical presence of the platform operator.
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmPhysicalPresence|TRUE|BOOLEAN|0x00010001

[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  ## Indicates whether TPM physical presence is locked during platform initialization.  
  #  Once it is locked, it can not be unlocked for TPM life time.<BR><BR>
  #   TRUE  - Lock TPM physical presence asserting method.<BR>
  #   FALSE - Not lock TPM physical presence asserting method.<BR>
  # @Prompt Lock TPM physical presence asserting method.
  gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceLifetimeLock|FALSE|BOOLEAN|0x00010003

[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  ## Indicates whether the platform supports the software method of asserting physical presence.<BR><BR>
  #   TRUE  - Supports the software method of asserting physical presence.<BR>
  #   FALSE - Does not support the software method of asserting physical presence.<BR>
  # @Prompt Enable software method of asserting physical presence.
  gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceCmdEnable|TRUE|BOOLEAN|0x00010004

[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  ## Indicates whether the platform supports the hardware method of asserting physical presence.<BR><BR>
  #   TRUE  - Supports the hardware method of asserting physical presence.<BR>
  #   FALSE - Does not support the hardware method of asserting physical presence.<BR>
  # @Prompt Enable hardware method of asserting physical presence.
  gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceHwEnable|TRUE|BOOLEAN|0x00010005

[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  ## This PCD indicates if debugger exists. <BR><BR>
  #   TRUE  - Firmware debugger exists.<BR>
  #   FALSE - Firmware debugger doesn't exist.<BR>
  # @Prompt Firmware debugger status.
  gEfiSecurityPkgTokenSpaceGuid.PcdFirmwareDebuggerInitialized|FALSE|BOOLEAN|0x00010009

  ## This PCD indicates the initialization policy for TPM 2.0.<BR><BR>
  #  If 0, no initialization needed - most likely used for chipset SRTM solution, in which TPM is already initialized.<BR>
  #  If 1, initialization needed.<BR>
  # @Prompt TPM 2.0 device initialization policy.<BR>
  # @ValidRange 0x80000001 | 0x00 - 0x1 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpm2InitializationPolicy|1|UINT8|0x0001000A

  ## This PCD indicates the initialization policy for TPM 1.2.<BR><BR>
  #  If 0, no initialization needed - most likely used for chipset SRTM solution, in which TPM is already initialized.<BR>
  #  If 1, initialization needed.<BR>
  # @Prompt TPM 1.2 device initialization policy.
  # @ValidRange 0x80000001 | 0x00 - 0x1 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmInitializationPolicy|1|UINT8|0x0001000B

  ## This PCD indicates the TPM 2.0 SelfTest policy.<BR><BR>
  #  if 0, no SelfTest needed - most likely used for fTPM, because it might already be tested.<BR>
  #  if 1, SelfTest needed.<BR>
  # @Prompt TPM 2.0 device selftest.
  # @ValidRange 0x80000001 | 0x00 - 0x1 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpm2SelfTestPolicy|1|UINT8|0x0001000C

  ## This PCD indicates Static Core Root of Trust for Measurement (SCRTM) policy using TPM 2.0.<BR><BR>
  #  if 0, no SCRTM measurement needed - In this case, it is already done.<BR>
  #  if 1, SCRTM measurement done by BIOS.<BR>
  # @Prompt SCRTM policy setting for TPM 2.0 device.
  # @ValidRange 0x80000001 | 0x00 - 0x1 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpm2ScrtmPolicy|1|UINT8|0x0001000D

  ## This PCD indicates Static Core Root of Trust for Measurement (SCRTM) policy using TPM 1.2.<BR><BR>
  #  if 0, no SCRTM measurement needed - In this case, it is already done.<BR>
  #  if 1, SCRTM measurement done by BIOS.<BR>
  # @Prompt SCRTM policy setting for TPM 1.2 device
  # @ValidRange 0x80000001 | 0x00 - 0x1 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmScrtmPolicy|1|UINT8|0x0001000E

  ## Guid name to identify TPM instance.<BR><BR>
  #  TPM_DEVICE_INTERFACE_NONE means disable.<BR>
  #  TPM_DEVICE_INTERFACE_TPM12 means TPM 1.2 DTPM.<BR>
  #  TPM_DEVICE_INTERFACE_DTPM2 means TPM 2.0 DTPM.<BR>
  #  Other GUID value means other TPM 2.0 device.<BR>
  # @Prompt TPM device type identifier
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmInstanceGuid |{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x0001000F

  ## This PCD indicates if BIOS auto detect TPM1.2 or dTPM2.0.<BR><BR>
  #  FALSE - No auto detection.<BR>
  #  TRUE  - Auto detection.<BR>
  # @Prompt TPM type detection.
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmAutoDetection|TRUE|BOOLEAN|0x00010011

  ## This PCD indicates TPM base address.<BR><BR>
  # @Prompt TPM device address.
  gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress|0xFED40000|UINT64|0x00010012

  ## This PCR means the OEM configurated number of PCR banks.
  #  0 means dynamic get from supported HASH algorithm
  # @Prompt OEM configurated number of PCR banks.
  gEfiSecurityPkgTokenSpaceGuid.PcdTcg2NumberOfPCRBanks|0x0|UINT32|0x00010015
  
  ## Provides one or more SHA 256 Hashes of the RSA 2048 public keys used to verify Recovery and Capsule Update images
  #
  # @Prompt One or more SHA 256 Hashes of RSA 2048 bit public keys used to verify Recovery and Capsule Update images
  #
  gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer|{0x91, 0x29, 0xc4, 0xbd, 0xea, 0x6d, 0xda, 0xb3, 0xaa, 0x6f, 0x50, 0x16, 0xfc, 0xdb, 0x4b, 0x7e, 0x3c, 0xd6, 0xdc, 0xa4, 0x7a, 0x0e, 0xdd, 0xe6, 0x15, 0x8c, 0x73, 0x96, 0xa2, 0xd4, 0xa6, 0x4d}|VOID*|0x00010013

[PcdsDynamic, PcdsDynamicEx]

  ## This PCD indicates Hash mask for TPM 2.0.<BR><BR>
  #  If this bit is set, that means this algorithm is needed to extend to PCR.<BR>
  #  If this bit is clear, that means this algorithm is NOT needed to extend to PCR.<BR>
  #    BIT0  -  SHA1.<BR>
  #    BIT1  -  SHA256.<BR>
  #    BIT2  -  SHA384.<BR>
  #    BIT3  -  SHA512.<BR>
  # @Prompt Hash mask for TPM 2.0
  # @ValidRange 0x80000001 | 0x00000000 - 0x0000000F 
  gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask|0x0000000F|UINT32|0x00010010

  ## This PCD indicated final BIOS supported Hash mask.
  #    Bios may choose to register a subset of PcdTpm2HashMask.
  #    So this PCD is final value of how many hash algo is extended to PCR.
  # @Prompt Hash Algorithm bitmap.
  gEfiSecurityPkgTokenSpaceGuid.PcdTcg2HashAlgorithmBitmap|0xFFFFFFFF|UINT32|0x00010016
  
[UserExtensions.TianoCore."ExtraFiles"]
  SecurityPkgExtra.uni