| /** @file | |
| Internal definitions for the virtio-blk driver, which produces Block I/O | |
| Protocol instances for virtio-blk devices. | |
| Copyright (C) 2012, Red Hat, Inc. | |
| This program and the accompanying materials are licensed and made available | |
| under the terms and conditions of the BSD License which accompanies this | |
| distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT | |
| WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _VIRTIO_BLK_DXE_H_ | |
| #define _VIRTIO_BLK_DXE_H_ | |
| #include <Protocol/BlockIo.h> | |
| #include <Protocol/ComponentName.h> | |
| #include <Protocol/DriverBinding.h> | |
| #include <IndustryStandard/Virtio.h> | |
| #define VBLK_SIG SIGNATURE_32 ('V', 'B', 'L', 'K') | |
| typedef struct { | |
| // | |
| // Parts of this structure are initialized / torn down in various functions | |
| // at various call depths. The table to the right should make it easier to | |
| // track them. | |
| // | |
| // field init function init dpth | |
| // --------------------- ------------------ --------- | |
| UINT32 Signature; // DriverBindingStart 0 | |
| VIRTIO_DEVICE_PROTOCOL *VirtIo; // DriverBindingStart 0 | |
| EFI_EVENT ExitBoot; // DriverBindingStart 0 | |
| VRING Ring; // VirtioRingInit 2 | |
| EFI_BLOCK_IO_PROTOCOL BlockIo; // VirtioBlkInit 1 | |
| EFI_BLOCK_IO_MEDIA BlockIoMedia; // VirtioBlkInit 1 | |
| } VBLK_DEV; | |
| #define VIRTIO_BLK_FROM_BLOCK_IO(BlockIoPointer) \ | |
| CR (BlockIoPointer, VBLK_DEV, BlockIo, VBLK_SIG) | |
| /** | |
| Device probe function for this driver. | |
| The DXE core calls this function for any given device in order to see if the | |
| driver can drive the device. | |
| Specs relevant in the general sense: | |
| - UEFI Spec 2.3.1 + Errata C: | |
| - 6.3 Protocol Handler Services -- for accessing the underlying device | |
| - 10.1 EFI Driver Binding Protocol -- for exporting ourselves | |
| - Driver Writer's Guide for UEFI 2.3.1 v1.01: | |
| - 5.1.3.4 OpenProtocol() and CloseProtocol() -- for accessing the | |
| underlying device | |
| - 9 Driver Binding Protocol -- for exporting ourselves | |
| @param[in] This The EFI_DRIVER_BINDING_PROTOCOL object | |
| incorporating this driver (independently of | |
| any device). | |
| @param[in] DeviceHandle The device to probe. | |
| @param[in] RemainingDevicePath Relevant only for bus drivers, ignored. | |
| @retval EFI_SUCCESS The driver supports the device being probed. | |
| @retval EFI_UNSUPPORTED Based on virtio-blk discovery, we do not support | |
| the device. | |
| @return Error codes from the OpenProtocol() boot service. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE DeviceHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ); | |
| /** | |
| After we've pronounced support for a specific device in | |
| DriverBindingSupported(), we start managing said device (passed in by the | |
| Driver Exeuction Environment) with the following service. | |
| See DriverBindingSupported() for specification references. | |
| @param[in] This The EFI_DRIVER_BINDING_PROTOCOL object | |
| incorporating this driver (independently of | |
| any device). | |
| @param[in] DeviceHandle The supported device to drive. | |
| @param[in] RemainingDevicePath Relevant only for bus drivers, ignored. | |
| @retval EFI_SUCCESS Driver instance has been created and | |
| initialized for the virtio-blk device, it | |
| is now accessibla via EFI_BLOCK_IO_PROTOCOL. | |
| @retval EFI_OUT_OF_RESOURCES Memory allocation failed. | |
| @return Error codes from the OpenProtocol() boot | |
| service, VirtioBlkInit(), or the | |
| InstallProtocolInterface() boot service. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE DeviceHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ); | |
| /** | |
| Stop driving a virtio-blk device and remove its BlockIo interface. | |
| This function replays the success path of DriverBindingStart() in reverse. | |
| The host side virtio-blk device is reset, so that the OS boot loader or the | |
| OS may reinitialize it. | |
| @param[in] This The EFI_DRIVER_BINDING_PROTOCOL object | |
| incorporating this driver (independently of any | |
| device). | |
| @param[in] DeviceHandle Stop driving this device. | |
| @param[in] NumberOfChildren Since this function belongs to a device driver | |
| only (as opposed to a bus driver), the caller | |
| environment sets NumberOfChildren to zero, and | |
| we ignore it. | |
| @param[in] ChildHandleBuffer Ignored (corresponding to NumberOfChildren). | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE DeviceHandle, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ); | |
| // | |
| // UEFI Spec 2.3.1 + Errata C, 12.8 EFI Block I/O Protocol | |
| // Driver Writer's Guide for UEFI 2.3.1 v1.01, | |
| // 24.2 Block I/O Protocol Implementations | |
| // | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkReset ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This, | |
| IN BOOLEAN ExtendedVerification | |
| ); | |
| /** | |
| ReadBlocks() operation for virtio-blk. | |
| See | |
| - UEFI Spec 2.3.1 + Errata C, 12.8 EFI Block I/O Protocol, 12.8 EFI Block I/O | |
| Protocol, EFI_BLOCK_IO_PROTOCOL.ReadBlocks(). | |
| - Driver Writer's Guide for UEFI 2.3.1 v1.01, 24.2.2. ReadBlocks() and | |
| ReadBlocksEx() Implementation. | |
| Parameter checks and conformant return values are implemented in | |
| VerifyReadWriteRequest() and SynchronousRequest(). | |
| A zero BufferSize doesn't seem to be prohibited, so do nothing in that case, | |
| successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkReadBlocks ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN UINTN BufferSize, | |
| OUT VOID *Buffer | |
| ); | |
| /** | |
| WriteBlocks() operation for virtio-blk. | |
| See | |
| - UEFI Spec 2.3.1 + Errata C, 12.8 EFI Block I/O Protocol, 12.8 EFI Block I/O | |
| Protocol, EFI_BLOCK_IO_PROTOCOL.WriteBlocks(). | |
| - Driver Writer's Guide for UEFI 2.3.1 v1.01, 24.2.3 WriteBlocks() and | |
| WriteBlockEx() Implementation. | |
| Parameter checks and conformant return values are implemented in | |
| VerifyReadWriteRequest() and SynchronousRequest(). | |
| A zero BufferSize doesn't seem to be prohibited, so do nothing in that case, | |
| successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkWriteBlocks ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN UINTN BufferSize, | |
| IN VOID *Buffer | |
| ); | |
| /** | |
| FlushBlocks() operation for virtio-blk. | |
| See | |
| - UEFI Spec 2.3.1 + Errata C, 12.8 EFI Block I/O Protocol, 12.8 EFI Block I/O | |
| Protocol, EFI_BLOCK_IO_PROTOCOL.FlushBlocks(). | |
| - Driver Writer's Guide for UEFI 2.3.1 v1.01, 24.2.4 FlushBlocks() and | |
| FlushBlocksEx() Implementation. | |
| If the underlying virtio-blk device doesn't support flushing (ie. | |
| write-caching), then this function should not be called by higher layers, | |
| according to EFI_BLOCK_IO_MEDIA characteristics set in VirtioBlkInit(). | |
| Should they do nonetheless, we do nothing, successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkFlushBlocks ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This | |
| ); | |
| // | |
| // The purpose of the following scaffolding (EFI_COMPONENT_NAME_PROTOCOL and | |
| // EFI_COMPONENT_NAME2_PROTOCOL implementation) is to format the driver's name | |
| // in English, for display on standard console devices. This is recommended for | |
| // UEFI drivers that follow the UEFI Driver Model. Refer to the Driver Writer's | |
| // Guide for UEFI 2.3.1 v1.01, 11 UEFI Driver and Controller Names. | |
| // | |
| // Device type names ("Virtio Block Device") are not formatted because the | |
| // driver supports only that device type. Therefore the driver name suffices | |
| // for unambiguous identification. | |
| // | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkGetDriverName ( | |
| IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
| IN CHAR8 *Language, | |
| OUT CHAR16 **DriverName | |
| ); | |
| EFI_STATUS | |
| EFIAPI | |
| VirtioBlkGetDeviceName ( | |
| IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
| IN EFI_HANDLE DeviceHandle, | |
| IN EFI_HANDLE ChildHandle, | |
| IN CHAR8 *Language, | |
| OUT CHAR16 **ControllerName | |
| ); | |
| #endif // _VIRTIO_BLK_DXE_H_ |