NetworkPkg/IpSecDxe/IpSecImpl.h - SHIFTPHONES/android_bootable_bootloader_edk2 - Gitiles

 /** @file
   The definitions related to IPsec protocol implementation.

   Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>

   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
   which accompanies this distribution.  The full text of the license may be found at
   http://opensource.org/licenses/bsd-license.php.

   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 **/

 #ifndef _IP_SEC_IMPL_H_
 #define _IP_SEC_IMPL_H_

 #include <Uefi.h>
 #include <Library/UefiLib.h>
 #include <Library/NetLib.h>
 #include <Library/BaseMemoryLib.h>
 #include <Library/UefiBootServicesTableLib.h>
 #include <Library/MemoryAllocationLib.h>
 #include <Protocol/IpSec.h>
 #include <Protocol/IpSecConfig.h>
 #include <Protocol/Dpc.h>
 #include <Protocol/ComponentName.h>
 #include <Protocol/ComponentName2.h>

 typedef struct _IPSEC_PRIVATE_DATA IPSEC_PRIVATE_DATA;
 typedef struct _IPSEC_SPD_ENTRY IPSEC_SPD_ENTRY;
 typedef struct _IPSEC_PAD_ENTRY IPSEC_PAD_ENTRY;
 typedef struct _IPSEC_SPD_DATA IPSEC_SPD_DATA;

 #define IPSEC_PRIVATE_DATA_SIGNATURE        SIGNATURE_32 ('I', 'P', 'S', 'E')

 #define IPSEC_PRIVATE_DATA_FROM_IPSEC(a)    CR (a, IPSEC_PRIVATE_DATA, IpSec, IPSEC_PRIVATE_DATA_SIGNATURE)
 #define IPSEC_PRIVATE_DATA_FROM_UDP4LIST(a) CR (a, IPSEC_PRIVATE_DATA, Udp4List, IPSEC_PRIVATE_DATA_SIGNATURE)
 #define IPSEC_PRIVATE_DATA_FROM_UDP6LIST(a) CR (a, IPSEC_PRIVATE_DATA, Udp6List, IPSEC_PRIVATE_DATA_SIGNATURE)
 #define IPSEC_UDP_SERVICE_FROM_LIST(a)      BASE_CR (a, IKE_UDP_SERVICE, List)
 #define IPSEC_SPD_ENTRY_FROM_LIST(a)        BASE_CR (a, IPSEC_SPD_ENTRY, List)
 #define IPSEC_SAD_ENTRY_FROM_LIST(a)        BASE_CR (a, IPSEC_SAD_ENTRY, List)
 #define IPSEC_PAD_ENTRY_FROM_LIST(a)        BASE_CR (a, IPSEC_PAD_ENTRY, List)
 #define IPSEC_SAD_ENTRY_FROM_SPD(a)         BASE_CR (a, IPSEC_SAD_ENTRY, BySpd)

 #define IPSEC_STATUS_DISABLED       0
 #define IPSEC_STATUS_ENABLED        1
 #define IPSEC_ESP_PROTOCOL          50
 #define IPSEC_AH_PROTOCOL           51
 #define IPSEC_DEFAULT_VARIABLE_SIZE 0x100

 //
 // Internal Structure Definition
 //
 #pragma pack(1)
 typedef struct _EFI_AH_HEADER {
   UINT8   NextHeader;
   UINT8   PayloadLen;
   UINT16  Reserved;
   UINT32  Spi;
   UINT32  SequenceNumber;
 } EFI_AH_HEADER;

 typedef struct _EFI_ESP_HEADER {
   UINT32  Spi;
   UINT32  SequenceNumber;
 } EFI_ESP_HEADER;

 typedef struct _EFI_ESP_TAIL {
   UINT8 PaddingLength;
   UINT8 NextHeader;
 } EFI_ESP_TAIL;
 #pragma pack()

 struct _IPSEC_SPD_DATA {
   CHAR16                    Name[100];
   UINT32                    PackageFlag;
   EFI_IPSEC_TRAFFIC_DIR     TrafficDirection;
   EFI_IPSEC_ACTION          Action;
   EFI_IPSEC_PROCESS_POLICY  *ProcessingPolicy;
   LIST_ENTRY                Sas;
 };

 struct _IPSEC_SPD_ENTRY {
   EFI_IPSEC_SPD_SELECTOR  *Selector;
   IPSEC_SPD_DATA          *Data;
   LIST_ENTRY              List;
 };

 typedef struct _IPSEC_SAD_DATA {
   EFI_IPSEC_MODE         Mode;
   UINT64                 SequenceNumber;
   UINT8                  AntiReplayWindowSize;
   UINT64                 AntiReplayBitmap[4];  // bitmap for received packet
   EFI_IPSEC_ALGO_INFO    AlgoInfo;
   EFI_IPSEC_SA_LIFETIME  SaLifetime;
   UINT32                 PathMTU;
   IPSEC_SPD_ENTRY        *SpdEntry;
   EFI_IPSEC_SPD_SELECTOR *SpdSelector;
   BOOLEAN                ESNEnabled;           // Extended (64-bit) SN enabled
   BOOLEAN                ManualSet;
   EFI_IP_ADDRESS         TunnelDestAddress;
   EFI_IP_ADDRESS         TunnelSourceAddress;
 } IPSEC_SAD_DATA;

 typedef struct _IPSEC_SAD_ENTRY {
   EFI_IPSEC_SA_ID  *Id;
   IPSEC_SAD_DATA  *Data;
   LIST_ENTRY      List;
   LIST_ENTRY      BySpd;                      // Linked on IPSEC_SPD_DATA.Sas
 } IPSEC_SAD_ENTRY;

 struct _IPSEC_PAD_ENTRY {
   EFI_IPSEC_PAD_ID    *Id;
   EFI_IPSEC_PAD_DATA  *Data;
   LIST_ENTRY          List;
 };

 typedef struct _IPSEC_RECYCLE_CONTEXT {
   EFI_IPSEC_FRAGMENT_DATA *FragmentTable;
   UINT8                   *PayloadBuffer;
 } IPSEC_RECYCLE_CONTEXT;

 //
 // Struct used to store the Hash and its data.
 //
 typedef struct {
   UINTN DataSize;
   UINT8 *Data;
 } HASH_DATA_FRAGMENT;

 struct _IPSEC_PRIVATE_DATA {
   UINT32                    Signature;
   EFI_HANDLE                Handle;           // Virtual handle to install private prtocol
   EFI_HANDLE                ImageHandle;
   EFI_IPSEC2_PROTOCOL       IpSec;
   EFI_IPSEC_CONFIG_PROTOCOL IpSecConfig;
   BOOLEAN                   SetBySelf;
   LIST_ENTRY                Udp4List;
   UINTN                     Udp4Num;
   LIST_ENTRY                Udp6List;
   UINTN                     Udp6Num;
   LIST_ENTRY                Ikev1SessionList;
   LIST_ENTRY                Ikev1EstablishedList;
   LIST_ENTRY                Ikev2SessionList;
   LIST_ENTRY                Ikev2EstablishedList;
   BOOLEAN                   IsIPsecDisabling;
 };

 /**
   This function processes the inbound traffic with IPsec.

   It checks the received packet security property, trims the ESP/AH header, and then
   returns without an IPsec protected IP Header and FragmentTable.

   @param[in]      IpVersion          The version of IP.
   @param[in, out] IpHead             Points to IP header containing the ESP/AH header
                                      to be trimed on input, and without ESP/AH header
                                      on return.
   @param[in, out] LastHead           The Last Header in IP header on return.
   @param[in, out] OptionsBuffer      Pointer to the options buffer.
   @param[in, out] OptionsLength      Length of the options buffer.
   @param[in, out] FragmentTable      Pointer to a list of fragments in form of IPsec
                                      protected on input, and without IPsec protected
                                      on return.
   @param[in, out] FragmentCount      The number of fragments.
   @param[out]     SpdEntry           Pointer to contain the address of SPD entry on return.
   @param[out]     RecycleEvent       The event for recycling of resources.

   @retval EFI_SUCCESS              The operation was successful.
   @retval EFI_UNSUPPORTED          The IPSEC protocol is not supported.

 **/
 EFI_STATUS
 IpSecProtectInboundPacket (
   IN     UINT8                       IpVersion,
   IN OUT VOID                        *IpHead,
   IN OUT UINT8                       *LastHead,
   IN OUT VOID                        **OptionsBuffer,
   IN OUT UINT32                      *OptionsLength,
   IN OUT EFI_IPSEC_FRAGMENT_DATA     **FragmentTable,
   IN OUT UINT32                      *FragmentCount,
      OUT EFI_IPSEC_SPD_SELECTOR      **SpdEntry,
      OUT EFI_EVENT                   *RecycleEvent
   );


 /**
   This fucntion processes the output traffic with IPsec.

   It protected the sending packet by encrypting it payload and inserting ESP/AH header
   in the orginal IP header, then return the IpHeader and IPsec protected Fragmentable.

   @param[in]      IpVersion          The version of IP.
   @param[in, out] IpHead             Point to IP header containing the orginal IP header
                                      to be processed on input, and inserted ESP/AH header
                                      on return.
   @param[in, out] LastHead           The Last Header in IP header.
   @param[in, out] OptionsBuffer      Pointer to the options buffer.
   @param[in, out] OptionsLength      Length of the options buffer.
   @param[in, out] FragmentTable      Pointer to a list of fragments to be protected by
                                      IPsec on input, and with IPsec protected
                                      on return.
   @param[in, out] FragmentCount      Number of fragments.
   @param[in]      SadEntry           Related SAD entry.
   @param[out]     RecycleEvent       Event for recycling of resources.

   @retval EFI_SUCCESS              The operation is successful.
   @retval EFI_UNSUPPORTED          If the IPSEC protocol is not supported.

 **/
 EFI_STATUS
 IpSecProtectOutboundPacket (
   IN     UINT8                       IpVersion,
   IN OUT VOID                        *IpHead,
   IN OUT UINT8                       *LastHead,
   IN OUT VOID                        **OptionsBuffer,
   IN OUT UINT32                      *OptionsLength,
   IN OUT EFI_IPSEC_FRAGMENT_DATA     **FragmentTable,
   IN OUT UINT32                      *FragmentCount,
   IN     IPSEC_SAD_ENTRY             *SadEntry,
      OUT EFI_EVENT                   *RecycleEvent
   );

 /**
   Check if the IP Address in the address range of AddressInfos specified.

   @param[in]  IpVersion         The IP version.
   @param[in]  IpAddr            Points to EFI_IP_ADDRESS to be check.
   @param[in]  AddressInfo       A list of EFI_IP_ADDRESS_INFO that is used to check
                                 the IP Address is matched.
   @param[in]  AddressCount      The total numbers of the AddressInfo.

   @retval   TRUE    If the Specified IP Address is in the range of the AddressInfos specified.
   @retval   FALSE   If the Specified IP Address is not in the range of the AddressInfos specified.

 **/
 BOOLEAN
 IpSecMatchIpAddress (
   IN UINT8                                  IpVersion,
   IN EFI_IP_ADDRESS                         *IpAddr,
   IN EFI_IP_ADDRESS_INFO                    *AddressInfo,
   IN UINT32                                 AddressCount
   );

 /**
   Find a PAD entry according to remote IP address.

   @param[in]  IpVersion         The version of IP.
   @param[in]  IpAddr            Point to remote IP address.

   @return The pointer of related PAD entry.

 **/
 IPSEC_PAD_ENTRY *
 IpSecLookupPadEntry (
   IN UINT8                                  IpVersion,
   IN EFI_IP_ADDRESS                         *IpAddr
   );

 /**
   Check if the specified IP packet can be serviced by this SPD entry.

   @param[in]  SpdEntry          Point to SPD entry.
   @param[in]  IpVersion         Version of IP.
   @param[in]  IpHead            Point to IP header.
   @param[in]  IpPayload         Point to IP payload.
   @param[in]  Protocol          The Last protocol of IP packet.
   @param[in]  IsOutbound        Traffic direction.
   @param[out] Action            The support action of SPD entry.

   @retval EFI_SUCCESS       Find the related SPD.
   @retval EFI_NOT_FOUND     Not find the related SPD entry;

 **/
 EFI_STATUS
 IpSecLookupSpdEntry (
   IN     IPSEC_SPD_ENTRY         *SpdEntry,
   IN     UINT8                   IpVersion,
   IN     VOID                    *IpHead,
   IN     UINT8                   *IpPayload,
   IN     UINT8                   Protocol,
   IN     BOOLEAN                 IsOutbound,
      OUT EFI_IPSEC_ACTION        *Action
   );

 /**
   Look up if there is existing SAD entry for specified IP packet sending.

   This function is called by the IPsecProcess when there is some IP packet needed to
   send out. This function checks if there is an existing SAD entry that can be serviced
   to this IP packet sending. If no existing SAD entry could be used, this
   function will invoke an IPsec Key Exchange Negotiation.

   @param[in]  Private           Points to private data.
   @param[in]  NicHandle         Points to a NIC handle.
   @param[in]  IpVersion         The version of IP.
   @param[in]  IpHead            The IP Header of packet to be sent out.
   @param[in]  IpPayload         The IP Payload to be sent out.
   @param[in]  OldLastHead       The Last protocol of the IP packet.
   @param[in]  SpdEntry          Points to a related SPD entry.
   @param[out] SadEntry          Contains the Point of a related SAD entry.

   @retval EFI_DEVICE_ERROR  One of following conditions is TRUE:
                             - If don't find related UDP service.
                             - Sequence Number is used up.
                             - Extension Sequence Number is used up.
   @retval EFI_NOT_READY     No existing SAD entry could be used.
   @retval EFI_SUCCESS       Find the related SAD entry.

 **/
 EFI_STATUS
 IpSecLookupSadEntry (
   IN IPSEC_PRIVATE_DATA      *Private,
   IN EFI_HANDLE              NicHandle,
   IN UINT8                   IpVersion,
   IN VOID                    *IpHead,
   IN UINT8                   *IpPayload,
   IN UINT8                   OldLastHead,
   IN IPSEC_SPD_ENTRY         *SpdEntry,
   OUT IPSEC_SAD_ENTRY        **SadEntry
   );

 /**
   Find the SAD through whole SAD list.

   @param[in]  Spi               The SPI used to search the SAD entry.
   @param[in]  DestAddress       The destination used to search the SAD entry.
   @param[in]  IpVersion         The IP version. Ip4 or Ip6.

   @return  The pointer to a certain SAD entry.

 **/
 IPSEC_SAD_ENTRY *
 IpSecLookupSadBySpi (
   IN UINT32                                 Spi,
   IN EFI_IP_ADDRESS                         *DestAddress,
   IN UINT8                                  IpVersion
   )
 ;

 /**
   Handles IPsec packet processing for inbound and outbound IP packets.

   The EFI_IPSEC_PROCESS process routine handles each inbound or outbound packet.
   The behavior is that it can perform one of the following actions:
   bypass the packet, discard the packet, or protect the packet.

   @param[in]      This             Pointer to the EFI_IPSEC2_PROTOCOL instance.
   @param[in]      NicHandle        Instance of the network interface.
   @param[in]      IpVersion        IPV4 or IPV6.
   @param[in, out] IpHead           Pointer to the IP Header.
   @param[in, out] LastHead         The protocol of the next layer to be processed by IPsec.
   @param[in, out] OptionsBuffer    Pointer to the options buffer.
   @param[in, out] OptionsLength    Length of the options buffer.
   @param[in, out] FragmentTable    Pointer to a list of fragments.
   @param[in, out] FragmentCount    Number of fragments.
   @param[in]      TrafficDirection Traffic direction.
   @param[out]     RecycleSignal    Event for recycling of resources.

   @retval EFI_SUCCESS              The packet was bypassed and all buffers remain the same.
   @retval EFI_SUCCESS              The packet was protected.
   @retval EFI_ACCESS_DENIED        The packet was discarded.

 **/
 EFI_STATUS
 EFIAPI
 IpSecProcess (
   IN     EFI_IPSEC2_PROTOCOL              *This,
   IN     EFI_HANDLE                      NicHandle,
   IN     UINT8                           IpVersion,
   IN OUT VOID                            *IpHead,
   IN OUT UINT8                           *LastHead,
   IN OUT VOID                            **OptionsBuffer,
   IN OUT UINT32                          *OptionsLength,
   IN OUT EFI_IPSEC_FRAGMENT_DATA         **FragmentTable,
   IN OUT UINT32                          *FragmentCount,
   IN     EFI_IPSEC_TRAFFIC_DIR           TrafficDirection,
      OUT EFI_EVENT                       *RecycleSignal
   );

 extern EFI_DPC_PROTOCOL    *mDpc;
 extern EFI_IPSEC2_PROTOCOL  mIpSecInstance;

 extern EFI_COMPONENT_NAME2_PROTOCOL gIpSecComponentName2;
 extern EFI_COMPONENT_NAME_PROTOCOL  gIpSecComponentName;


 #endif
	/** @file
	The definitions related to IPsec protocol implementation.

	Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>

	This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php.

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	**/

	#ifndef _IP_SEC_IMPL_H_
	#define _IP_SEC_IMPL_H_

	#include <Uefi.h>
	#include <Library/UefiLib.h>
	#include <Library/NetLib.h>
	#include <Library/BaseMemoryLib.h>
	#include <Library/UefiBootServicesTableLib.h>
	#include <Library/MemoryAllocationLib.h>
	#include <Protocol/IpSec.h>
	#include <Protocol/IpSecConfig.h>
	#include <Protocol/Dpc.h>
	#include <Protocol/ComponentName.h>
	#include <Protocol/ComponentName2.h>

	typedef struct _IPSEC_PRIVATE_DATA IPSEC_PRIVATE_DATA;
	typedef struct _IPSEC_SPD_ENTRY IPSEC_SPD_ENTRY;
	typedef struct _IPSEC_PAD_ENTRY IPSEC_PAD_ENTRY;
	typedef struct _IPSEC_SPD_DATA IPSEC_SPD_DATA;

	#define IPSEC_PRIVATE_DATA_SIGNATURE SIGNATURE_32 ('I', 'P', 'S', 'E')

	#define IPSEC_PRIVATE_DATA_FROM_IPSEC(a) CR (a, IPSEC_PRIVATE_DATA, IpSec, IPSEC_PRIVATE_DATA_SIGNATURE)
	#define IPSEC_PRIVATE_DATA_FROM_UDP4LIST(a) CR (a, IPSEC_PRIVATE_DATA, Udp4List, IPSEC_PRIVATE_DATA_SIGNATURE)
	#define IPSEC_PRIVATE_DATA_FROM_UDP6LIST(a) CR (a, IPSEC_PRIVATE_DATA, Udp6List, IPSEC_PRIVATE_DATA_SIGNATURE)
	#define IPSEC_UDP_SERVICE_FROM_LIST(a) BASE_CR (a, IKE_UDP_SERVICE, List)
	#define IPSEC_SPD_ENTRY_FROM_LIST(a) BASE_CR (a, IPSEC_SPD_ENTRY, List)
	#define IPSEC_SAD_ENTRY_FROM_LIST(a) BASE_CR (a, IPSEC_SAD_ENTRY, List)
	#define IPSEC_PAD_ENTRY_FROM_LIST(a) BASE_CR (a, IPSEC_PAD_ENTRY, List)
	#define IPSEC_SAD_ENTRY_FROM_SPD(a) BASE_CR (a, IPSEC_SAD_ENTRY, BySpd)

	#define IPSEC_STATUS_DISABLED 0
	#define IPSEC_STATUS_ENABLED 1
	#define IPSEC_ESP_PROTOCOL 50
	#define IPSEC_AH_PROTOCOL 51
	#define IPSEC_DEFAULT_VARIABLE_SIZE 0x100

	//
	// Internal Structure Definition
	//
	#pragma pack(1)
	typedef struct _EFI_AH_HEADER {
	UINT8 NextHeader;
	UINT8 PayloadLen;
	UINT16 Reserved;
	UINT32 Spi;
	UINT32 SequenceNumber;
	} EFI_AH_HEADER;

	typedef struct _EFI_ESP_HEADER {
	UINT32 Spi;
	UINT32 SequenceNumber;
	} EFI_ESP_HEADER;

	typedef struct _EFI_ESP_TAIL {
	UINT8 PaddingLength;
	UINT8 NextHeader;
	} EFI_ESP_TAIL;
	#pragma pack()

	struct _IPSEC_SPD_DATA {
	CHAR16 Name[100];
	UINT32 PackageFlag;
	EFI_IPSEC_TRAFFIC_DIR TrafficDirection;
	EFI_IPSEC_ACTION Action;
	EFI_IPSEC_PROCESS_POLICY *ProcessingPolicy;
	LIST_ENTRY Sas;
	};

	struct _IPSEC_SPD_ENTRY {
	EFI_IPSEC_SPD_SELECTOR *Selector;
	IPSEC_SPD_DATA *Data;
	LIST_ENTRY List;
	};

	typedef struct _IPSEC_SAD_DATA {
	EFI_IPSEC_MODE Mode;
	UINT64 SequenceNumber;
	UINT8 AntiReplayWindowSize;
	UINT64 AntiReplayBitmap[4]; // bitmap for received packet
	EFI_IPSEC_ALGO_INFO AlgoInfo;
	EFI_IPSEC_SA_LIFETIME SaLifetime;
	UINT32 PathMTU;
	IPSEC_SPD_ENTRY *SpdEntry;
	EFI_IPSEC_SPD_SELECTOR *SpdSelector;
	BOOLEAN ESNEnabled; // Extended (64-bit) SN enabled
	BOOLEAN ManualSet;
	EFI_IP_ADDRESS TunnelDestAddress;
	EFI_IP_ADDRESS TunnelSourceAddress;
	} IPSEC_SAD_DATA;

	typedef struct _IPSEC_SAD_ENTRY {
	EFI_IPSEC_SA_ID *Id;
	IPSEC_SAD_DATA *Data;
	LIST_ENTRY List;
	LIST_ENTRY BySpd; // Linked on IPSEC_SPD_DATA.Sas
	} IPSEC_SAD_ENTRY;

	struct _IPSEC_PAD_ENTRY {
	EFI_IPSEC_PAD_ID *Id;
	EFI_IPSEC_PAD_DATA *Data;
	LIST_ENTRY List;
	};

	typedef struct _IPSEC_RECYCLE_CONTEXT {
	EFI_IPSEC_FRAGMENT_DATA *FragmentTable;
	UINT8 *PayloadBuffer;
	} IPSEC_RECYCLE_CONTEXT;

	//
	// Struct used to store the Hash and its data.
	//
	typedef struct {
	UINTN DataSize;
	UINT8 *Data;
	} HASH_DATA_FRAGMENT;

	struct _IPSEC_PRIVATE_DATA {
	UINT32 Signature;
	EFI_HANDLE Handle; // Virtual handle to install private prtocol
	EFI_HANDLE ImageHandle;
	EFI_IPSEC2_PROTOCOL IpSec;
	EFI_IPSEC_CONFIG_PROTOCOL IpSecConfig;
	BOOLEAN SetBySelf;
	LIST_ENTRY Udp4List;
	UINTN Udp4Num;
	LIST_ENTRY Udp6List;
	UINTN Udp6Num;
	LIST_ENTRY Ikev1SessionList;
	LIST_ENTRY Ikev1EstablishedList;
	LIST_ENTRY Ikev2SessionList;
	LIST_ENTRY Ikev2EstablishedList;
	BOOLEAN IsIPsecDisabling;
	};

	/**
	This function processes the inbound traffic with IPsec.

	It checks the received packet security property, trims the ESP/AH header, and then
	returns without an IPsec protected IP Header and FragmentTable.

	@param[in] IpVersion The version of IP.
	@param[in, out] IpHead Points to IP header containing the ESP/AH header
	to be trimed on input, and without ESP/AH header
	on return.
	@param[in, out] LastHead The Last Header in IP header on return.
	@param[in, out] OptionsBuffer Pointer to the options buffer.
	@param[in, out] OptionsLength Length of the options buffer.
	@param[in, out] FragmentTable Pointer to a list of fragments in form of IPsec
	protected on input, and without IPsec protected
	on return.
	@param[in, out] FragmentCount The number of fragments.
	@param[out] SpdEntry Pointer to contain the address of SPD entry on return.
	@param[out] RecycleEvent The event for recycling of resources.

	@retval EFI_SUCCESS The operation was successful.
	@retval EFI_UNSUPPORTED The IPSEC protocol is not supported.

	**/
	EFI_STATUS
	IpSecProtectInboundPacket (
	IN UINT8 IpVersion,
	IN OUT VOID *IpHead,
	IN OUT UINT8 *LastHead,
	IN OUT VOID **OptionsBuffer,
	IN OUT UINT32 *OptionsLength,
	IN OUT EFI_IPSEC_FRAGMENT_DATA **FragmentTable,
	IN OUT UINT32 *FragmentCount,
	OUT EFI_IPSEC_SPD_SELECTOR **SpdEntry,
	OUT EFI_EVENT *RecycleEvent
	);


	/**
	This fucntion processes the output traffic with IPsec.

	It protected the sending packet by encrypting it payload and inserting ESP/AH header
	in the orginal IP header, then return the IpHeader and IPsec protected Fragmentable.

	@param[in] IpVersion The version of IP.
	@param[in, out] IpHead Point to IP header containing the orginal IP header
	to be processed on input, and inserted ESP/AH header
	on return.
	@param[in, out] LastHead The Last Header in IP header.
	@param[in, out] OptionsBuffer Pointer to the options buffer.
	@param[in, out] OptionsLength Length of the options buffer.
	@param[in, out] FragmentTable Pointer to a list of fragments to be protected by
	IPsec on input, and with IPsec protected
	on return.
	@param[in, out] FragmentCount Number of fragments.
	@param[in] SadEntry Related SAD entry.
	@param[out] RecycleEvent Event for recycling of resources.

	@retval EFI_SUCCESS The operation is successful.
	@retval EFI_UNSUPPORTED If the IPSEC protocol is not supported.

	**/
	EFI_STATUS
	IpSecProtectOutboundPacket (
	IN UINT8 IpVersion,
	IN OUT VOID *IpHead,
	IN OUT UINT8 *LastHead,
	IN OUT VOID **OptionsBuffer,
	IN OUT UINT32 *OptionsLength,
	IN OUT EFI_IPSEC_FRAGMENT_DATA **FragmentTable,
	IN OUT UINT32 *FragmentCount,
	IN IPSEC_SAD_ENTRY *SadEntry,
	OUT EFI_EVENT *RecycleEvent
	);

	/**
	Check if the IP Address in the address range of AddressInfos specified.

	@param[in] IpVersion The IP version.
	@param[in] IpAddr Points to EFI_IP_ADDRESS to be check.
	@param[in] AddressInfo A list of EFI_IP_ADDRESS_INFO that is used to check
	the IP Address is matched.
	@param[in] AddressCount The total numbers of the AddressInfo.

	@retval TRUE If the Specified IP Address is in the range of the AddressInfos specified.
	@retval FALSE If the Specified IP Address is not in the range of the AddressInfos specified.

	**/
	BOOLEAN
	IpSecMatchIpAddress (
	IN UINT8 IpVersion,
	IN EFI_IP_ADDRESS *IpAddr,
	IN EFI_IP_ADDRESS_INFO *AddressInfo,
	IN UINT32 AddressCount
	);

	/**
	Find a PAD entry according to remote IP address.

	@param[in] IpVersion The version of IP.
	@param[in] IpAddr Point to remote IP address.

	@return The pointer of related PAD entry.

	**/
	IPSEC_PAD_ENTRY *
	IpSecLookupPadEntry (
	IN UINT8 IpVersion,
	IN EFI_IP_ADDRESS *IpAddr
	);

	/**
	Check if the specified IP packet can be serviced by this SPD entry.

	@param[in] SpdEntry Point to SPD entry.
	@param[in] IpVersion Version of IP.
	@param[in] IpHead Point to IP header.
	@param[in] IpPayload Point to IP payload.
	@param[in] Protocol The Last protocol of IP packet.
	@param[in] IsOutbound Traffic direction.
	@param[out] Action The support action of SPD entry.

	@retval EFI_SUCCESS Find the related SPD.
	@retval EFI_NOT_FOUND Not find the related SPD entry;

	**/
	EFI_STATUS
	IpSecLookupSpdEntry (
	IN IPSEC_SPD_ENTRY *SpdEntry,
	IN UINT8 IpVersion,
	IN VOID *IpHead,
	IN UINT8 *IpPayload,
	IN UINT8 Protocol,
	IN BOOLEAN IsOutbound,
	OUT EFI_IPSEC_ACTION *Action
	);

	/**
	Look up if there is existing SAD entry for specified IP packet sending.

	This function is called by the IPsecProcess when there is some IP packet needed to
	send out. This function checks if there is an existing SAD entry that can be serviced
	to this IP packet sending. If no existing SAD entry could be used, this
	function will invoke an IPsec Key Exchange Negotiation.

	@param[in] Private Points to private data.
	@param[in] NicHandle Points to a NIC handle.
	@param[in] IpVersion The version of IP.
	@param[in] IpHead The IP Header of packet to be sent out.
	@param[in] IpPayload The IP Payload to be sent out.
	@param[in] OldLastHead The Last protocol of the IP packet.
	@param[in] SpdEntry Points to a related SPD entry.
	@param[out] SadEntry Contains the Point of a related SAD entry.

	@retval EFI_DEVICE_ERROR One of following conditions is TRUE:
	- If don't find related UDP service.
	- Sequence Number is used up.
	- Extension Sequence Number is used up.
	@retval EFI_NOT_READY No existing SAD entry could be used.
	@retval EFI_SUCCESS Find the related SAD entry.

	**/
	EFI_STATUS
	IpSecLookupSadEntry (
	IN IPSEC_PRIVATE_DATA *Private,
	IN EFI_HANDLE NicHandle,
	IN UINT8 IpVersion,
	IN VOID *IpHead,
	IN UINT8 *IpPayload,
	IN UINT8 OldLastHead,
	IN IPSEC_SPD_ENTRY *SpdEntry,
	OUT IPSEC_SAD_ENTRY **SadEntry
	);

	/**
	Find the SAD through whole SAD list.

	@param[in] Spi The SPI used to search the SAD entry.
	@param[in] DestAddress The destination used to search the SAD entry.
	@param[in] IpVersion The IP version. Ip4 or Ip6.

	@return The pointer to a certain SAD entry.

	**/
	IPSEC_SAD_ENTRY *
	IpSecLookupSadBySpi (
	IN UINT32 Spi,
	IN EFI_IP_ADDRESS *DestAddress,
	IN UINT8 IpVersion
	)
	;

	/**
	Handles IPsec packet processing for inbound and outbound IP packets.

	The EFI_IPSEC_PROCESS process routine handles each inbound or outbound packet.
	The behavior is that it can perform one of the following actions:
	bypass the packet, discard the packet, or protect the packet.

	@param[in] This Pointer to the EFI_IPSEC2_PROTOCOL instance.
	@param[in] NicHandle Instance of the network interface.
	@param[in] IpVersion IPV4 or IPV6.
	@param[in, out] IpHead Pointer to the IP Header.
	@param[in, out] LastHead The protocol of the next layer to be processed by IPsec.
	@param[in, out] OptionsBuffer Pointer to the options buffer.
	@param[in, out] OptionsLength Length of the options buffer.
	@param[in, out] FragmentTable Pointer to a list of fragments.
	@param[in, out] FragmentCount Number of fragments.
	@param[in] TrafficDirection Traffic direction.
	@param[out] RecycleSignal Event for recycling of resources.

	@retval EFI_SUCCESS The packet was bypassed and all buffers remain the same.
	@retval EFI_SUCCESS The packet was protected.
	@retval EFI_ACCESS_DENIED The packet was discarded.

	**/
	EFI_STATUS
	EFIAPI
	IpSecProcess (
	IN EFI_IPSEC2_PROTOCOL *This,
	IN EFI_HANDLE NicHandle,
	IN UINT8 IpVersion,
	IN OUT VOID *IpHead,
	IN OUT UINT8 *LastHead,
	IN OUT VOID **OptionsBuffer,
	IN OUT UINT32 *OptionsLength,
	IN OUT EFI_IPSEC_FRAGMENT_DATA **FragmentTable,
	IN OUT UINT32 *FragmentCount,
	IN EFI_IPSEC_TRAFFIC_DIR TrafficDirection,
	OUT EFI_EVENT *RecycleSignal
	);

	extern EFI_DPC_PROTOCOL *mDpc;
	extern EFI_IPSEC2_PROTOCOL mIpSecInstance;

	extern EFI_COMPONENT_NAME2_PROTOCOL gIpSecComponentName2;
	extern EFI_COMPONENT_NAME_PROTOCOL gIpSecComponentName;


	#endif