OvmfPkg/OvmfPkg.fdf

#/** @file
#  Open Virtual Machine Firmware: FDF
#
#  Copyright (c) 2006 - 2009, Intel Corporation
#
#  All rights reserved. This program and the accompanying materials
#  are licensed and made available under the terms and conditions of the BSD License
#  which accompanies this distribution. The full text of the license may be found at
#  http://opensource.org/licenses/bsd-license.php
#
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.OVMF]
BaseAddress   = 0xFFE00000     # The base address of the FLASH Device.
Size          = 0x00200000     # The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize     = 0x10000
NumBlocks     = 0x20

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x0|0x200000
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
FV = MAINFV

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.DXEFV]
BlockSize          = 0x1000
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

#
# Files to be placed in DXEFV
#
# This firmware volume will have files placed in it uncompressed,
# and then then entire firmware volume will be compressed in a
# single compression operation in order to achieve better
# overall compression.
#

APRIORI DXE {
  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
}

#
# DXE Phase modules
#
INF  MdeModulePkg/Core/Dxe/DxeMain.inf

INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF  MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
INF  UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF  UefiCpuPkg/CpuDxe/CpuDxe.inf
INF  PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF  PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF  PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF  MdeModulePkg/Universal/Metronome/Metronome.inf
INF  PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf

INF  OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
INF  MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF  MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF  PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf

INF  PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
INF  IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
INF  IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
INF  IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf

INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
INF  RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf

INF  FatBinPkg/EnhancedFatDxe/Fat.inf

INF  EdkShellBinPkg/FullShell/FullShell.inf

FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
      SECTION RAW = MdeModulePkg/Logo/Logo.bmp
    }
  }

################################################################################

[FV.MAINFV]
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

#
# Files to be placed in MAINFV
#
# This firmware volume will have all the files placed in it which
# must not be compressed at the initial boot phase.  The only
# exception to this is the compressed 'DXEFV'.
#

APRIORI PEI {
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}

#
#  SEC Phase modules
#
INF  OvmfPkg/Sec/SecMain.inf

#
#  PEI Phase modules
#
INF  MdeModulePkg/Core/Pei/PeiMain.inf
INF  RuleOverride=NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF  RuleOverride=NORELOC IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF  RuleOverride=NORELOC OvmfPkg/PlatformPei/PlatformPei.inf
INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

#
# This file contains the compressed 'DXEFV', which is compressed
# in a single compression operation in order to achieve better
# overall compression.
#
FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {
   SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
      SECTION FV_IMAGE = DXEFV
   }
 }

INF  RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/Bin/ResetVector.inf

################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    PE32     PE32   Align=32    |.efi
    UI       STRING ="$(MODULE_NAME)" Optional
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) {
    PE32     PE32           |.efi
    UI       STRING ="$(MODULE_NAME)" Optional
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM.NORELOC]
  FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED  {
     PEI_DEPEX PEI_DEPEX Optional        |.depex
     TE        TE                        |.efi
     UI        STRING="$(MODULE_NAME)" Optional
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional        |.depex
     PE32      PE32   Align=32           |.efi
     UI       STRING="$(MODULE_NAME)" Optional
     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM.TIANOCOMPRESSED]
  FILE PEIM = $(NAMED_GUID) {
    PEI_DEPEX PEI_DEPEX Optional         |.depex
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
      PE32      PE32                     |.efi
      UI        STRING="$(MODULE_NAME)" Optional
      VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
    }
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32     PE32           |.efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    PE32     PE32                    |.efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    PE32     PE32                    |.efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    PE32     PE32                    |.efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    PE32     PE32                    |.efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.USER_DEFINED.ACPITABLE]
  FILE FREEFORM = $(NAMED_GUID) {
    RAW ACPI               |.acpi
    RAW ASL                |.aml
  }

[Rule.Common.SEC.RESET_VECTOR]
  FILE RAW = $(NAMED_GUID) {
    RAW RAW                |.raw
  }

[OptionRom.CirrusLogic5446]
INF  OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {
    PCI_DEVICE_ID  = 0x00B8
  }