Nt32Pkg/Nt32Pkg.fdf

# This is NT32 FDF file
#
# Copyright (c) 2007, Intel Corporation
#
#  All rights reserved. This program and the accompanying materials
#    are licensed and made available under the terms and conditions of the BSD License
#    which accompanies this distribution. The full text of the license may be found at
#    http://opensource.org/licenses/bsd-license.php
#
#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Fv_Recovery]
BaseAddress   = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress  #The base address of the FLASH Device.
Size          = 0x002a0000                                           #The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize     = 0x10000
NumBlocks     = 0x2a

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00280000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoverySize
FV = FvRecovery

0x00280000|0x0000c000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
DATA = {
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,
  0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,
  0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff,
  0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01,
  0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00,
  0x5a, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}

0x0028c000|0x00002000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize

0x0028e000|0x00002000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
DATA = {
  0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,
  0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,
  0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff,
  0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00
}

0x00290000|0x00010000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FvRecovery]
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
  ##
  #  PEI Phase modules
  ##
  ##
  #  PEI Apriori file example, more PEIM module added later.
  ##
APRIORI PEI {
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
  }
APRIORI DXE {
  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  INF  Nt32Pkg/MetronomeDxe/MetronomeDxe.inf
  }

INF  MdeModulePkg/Core/Pei/PeiMain.inf
INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
INF  Nt32Pkg/BootModePei/BootModePei.inf
INF  Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf
INF  MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf
INF  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF  Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf
INF  Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf
INF  Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf
INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

  ##
  #  DXE Phase modules
  ##
INF  MdeModulePkg/Core/Dxe/DxeMain.inf
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF  Nt32Pkg/MetronomeDxe/MetronomeDxe.inf
INF  Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF  Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF  Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF  MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF  IntelFrameworkModulePkg/Universal/HiiDataBaseDxe/HiiDatabase.inf
INF  Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf
INF  Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf
INF  Nt32Pkg/PlatformBdsDxe/PlatformBdsDxe.inf
INF  MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf
INF  IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
INF  Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf
INF  Nt32Pkg/TimerDxe/TimerDxe.inf
INF  IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF  MdeModulePkg/Universal/WatchDogTimerDxe/WatchDogTimer.inf
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF  IntelFrameworkModulePkg/Universal/SetupBrowserDxe/SetupBrowser.inf
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF  MdeModulePkg/Bus/Pci/AtapiPassThruDxe/AtapiPassThru.inf
INF  IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf     ##This driver follows UEFI specification definition
INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf    ##This driver follows UEFI specification definition
INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF  Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf
INF  Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf
INF  Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf
INF  Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf
INF  Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf
INF  IntelFrameworkModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
INF  MdeModulePkg/Application/HelloWorld/HelloWorld.inf

################################################################################
#
# FILE statements are provided so that a platform integrator can include
# complete EFI FFS files, as well as a method for constructing FFS files
# using curly "{}" brace scoping. The following three FILEs are
# for binary shell, binary fat and logo module.
#
################################################################################
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
    SECTION COMPRESS PI_STD {
      SECTION GUIDED {
        SECTION PE32 = EdkShellBinPkg/FullShell/ia32/Shell_Full.efi
      }
    }
  }
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
    SECTION COMPRESS PI_STD {
      SECTION GUIDED {
        SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi
      }
    }
  }
FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {
    SECTION COMPRESS PI_STD {
      SECTION GUIDED {
        SECTION RAW = MdeModulePkg/Logo/Logo.bmp
      }
    }
  }


################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################


############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # 
############################################################################
#
#[Rule.Common.DXE_DRIVER]
#  FILE DRIVER = $(NAMED_GUID) {
#    DXE_DEPEX    DXE_DEPEX Optional      |.depex
#    COMPRESS PI_STD {
#      GUIDED {
#        PE32     PE32                    |.efi
#        UI       STRING="$(MODULE_NAME)" Optional
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
#      }
#    }
#  }
#
############################################################################

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    PE32     PE32           |.efi
    UI       STRING ="$(MODULE_NAME)" Optional         
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)    
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional        |.depex
     PE32      PE32                      |.efi
     UI       STRING="$(MODULE_NAME)" Optional         
     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)   
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    COMPRESS PI_STD {
      PE32     PE32           |.efi
      UI       STRING="$(MODULE_NAME)" Optional
      VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
    }
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    COMPRESS PI_STD {
      GUIDED {
        PE32     PE32                    |.efi
        UI       STRING="$(MODULE_NAME)" Optional
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
      }
    }
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    COMPRESS PI_STD {
      GUIDED {
        PE32     PE32                    |.efi
        UI       STRING="$(MODULE_NAME)" Optional
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
      }
    }
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    COMPRESS PI_STD {
      GUIDED {
        PE32     PE32                    |.efi
        UI       STRING="$(MODULE_NAME)" Optional
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
      }
    }
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    COMPRESS PI_STD {
      GUIDED {
        PE32     PE32                    |.efi
        UI       STRING="$(MODULE_NAME)" Optional
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
      }
    }
  }