BuildNotes2.txt - SHIFTPHONES/android_bootable_bootloader_edk2 - Gitiles

 Intel(R) Platform Innovation Framework for EFI
 EFI Development Kit II (EDK II)
 2010-03-31

 Intel is a trademark or registered trademark of Intel Corporation or its
 subsidiaries in the United States and other countries.
 * Other names and brands may be claimed as the property of others.
 Copyright (c) 2007 - 2010, Intel Corporation  All rights reserved.

 EDK II packages can be checked out from the following SVN address:
 http://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2

 The detailed introduction of these packages can be found in each package
 description file. (The *.dec file under the package directory)


 -------------------------------------------------------------------------------
 The most recent version of the setup instructions is available on the EDK II
 web-site:
   http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Step-by-step_instructions


 -------------------------------------------------------------------------------
 Quick Start (Windows Development Platform)
 -----------

 In a command prompt window, change to the top-level directory of the EDK II
 source.

 Note:
   The first time the edksetup script is executed, it creates three files in the
   %WORKSPACE%\Conf directory. The files: tools_def.txt, target.txt and
   build_rule.txt, are only created if they do not exist, if they exist, they
   are not touched.

 First, set up your project workspace. If you have previously initialized this
 WORKSPACE, and a newer version of the *.template files in
 WORKSPACE\BaseTools\Conf exists, remove the *.txt files in the WORKSPACE\Conf
 directory prior to running the edksetup script.

 For the reference build of the Nt32 Platform emulation environment, use the
 edksetup.bat option: --nt32. For building other platforms or modules, this
 option is not required, as Visual Studio standard includes, libraries and/or
 dlls are not required for normal development.

     c:\MyWork\edk2\> edksetup --nt32

 The default tool chain (named MYTOOLS) is pre-configured to use VS2005 for IA32
 and X64 target architectures and the DDK for IPF target architectures. To use a
 different tool chain, either modify the tools_def.txt file's MYTOOLS entries,
 or modify the %WORKSPACE%\Conf\target.txt file's TOOL_CHAIN_TAG. The pre-defined
 tags are listed near the top of the %WORKSPACE%\Conf\tools_def.txt file, below
 the Supported Tool Chains comment.
 Alternatively, you may use the build command's -t option to specify a different
 tool chain tag name: build -t VS2003 ... , for example.  Using this method will
 require that you always use the build command's -t option.


 Next, go to the module directory and begin to build.  This example is for the
 HelloWorld application.

     c:\MyWork\edk2\> cd MdeModulePkg\Application\HelloWorld
     c:\MyWork\edk2\> build

 If you want to build the a module in another package (for example,
 MdePkg\Library\BaseLib\BaseLib.inf), please edit the file,
 %WORKSPACE%\Conf\Target.txt, first.

 Change the following line
     ACTIVE_PLATFORM       = MdeModulePkg/MdeModulePkg.dsc
 to
     ACTIVE_PLATFORM       = MdePkg/MdePkg.dsc

 Then go to MdePkg\Library\BaseLib directory and type build:
     c:\MyWork\edk2\> cd MdePkg\Library\BaseLib
     c:\MyWork\edk2\> build

 If you want build a platform, ACTIVE_PLATFORM must be set to your desired
 platform dsc file, go to directory which must be not a module's directory, and
 run "build" command.

 Instead of changing Target.txt, you can specify platform, module and/or
 architecture on command line.
 For example, if you want to build NT32 platform, you can just type

     c:\MyWork\edk2\> build -p Nt32Pkg\Nt32Pkg.dsc -a IA32

 and if you want to build HelloWorld module, you can just type

     c:\MyWork\edk2\> build -p Nt32Pkg\Nt32Pkg.dsc -a IA32 -m MdeModulePkg\Application\HelloWorld\HelloWorld.inf

 Other helpful command line options of build tool include "-v" and "-d".
 The "-v" option is used to turn on the verbose build, which provide more
 information during the build. "-d <debug level 0-9>" option is used to
 turn on the debug information which is helpful debugging build tools.

 For more information on build options, please try "build -h" on command line.

 Note:
   The Windows style help option "/?" is not a valid option for the build
   command.


 -------------------------------------------------------------------------------
 Supported build targets
 -----------------------

 all       - Build whole platform or module. It can be ignored.
 genc      - Generate AutoGen.c, AutoGen.h and <ModuleName>.depex files only.
 genmake   - Generate makefiles in addition to files generated by "genc" target.
 clean     - Clean intermediate files
 cleanall  - Clean all generated files and directories during build, except the
             generated Makefile files (top level and module makefiles)
 cleanlib  - Clean all generated files and directories during library build
 run       - Launch NT32 shell (only valid for NT32 platform)

 -------------------------------------------------------------------------------
 Tools in Python
 ---------------

 * Run buld tool written in Python from source
   The build tool written in Python can be executed from its source directly as
   long as you have the Python interpreter (version 2.5) installed. The source
   of Python code is locating at:

     http://edk2-buildtools.svn.sourceforge.net/svnroot/edk2-buildtools/trunk/BaseTools

   where:

     build/build.py      - The entry tool of build tools

   "build.py" steps:
     1. Run "edksetup.bat"
     2. set PYTHONPATH to the local directory of above source
        (BaseTools/Source/Python)
     3. Set ACTIVE_PLATFORM in WORKSPACE\Conf
     4. Go to platform or module directory
     5. Run "<python_interpreter.exe> <python_source_dir>/build/build.py" or
        "<python_source_dir>/build/build.py" directly.

 * Convert Python source to exe file
   The tools written in Python can be coverted into executable program which can
   be executed without Python interpreter. One of the conversion tools is called
   cx_Freeze, available at:

     http://sourceforge.net/projects/cx-freeze/

   If you have installed cx_Freeze at c:\cx_Freeze-3.0.3. Use the following
   command lines to convert MyBuild.py to a Windows executable.

     set PYTHONPATH=<buildtools>\BaseTools\Source\Python
     c:\cx_Freeze-3.0.3\FreezePython.exe --include-modules=encodings.cp437,encodings.gbk,encodings.utf_16,encodings.utf_8 --install-dir=.\mybuild MyBuild.py

   The generated .exe files are put in "mybuild" subdirectory.
	Intel(R) Platform Innovation Framework for EFI
	EFI Development Kit II (EDK II)
	2010-03-31

	Intel is a trademark or registered trademark of Intel Corporation or its
	subsidiaries in the United States and other countries.
	* Other names and brands may be claimed as the property of others.
	Copyright (c) 2007 - 2010, Intel Corporation All rights reserved.

	EDK II packages can be checked out from the following SVN address:
	http://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2

	The detailed introduction of these packages can be found in each package
	description file. (The *.dec file under the package directory)


	-------------------------------------------------------------------------------
	The most recent version of the setup instructions is available on the EDK II
	web-site:
	http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Step-by-step_instructions


	-------------------------------------------------------------------------------
	Quick Start (Windows Development Platform)
	-----------

	In a command prompt window, change to the top-level directory of the EDK II
	source.

	Note:
	The first time the edksetup script is executed, it creates three files in the
	%WORKSPACE%\Conf directory. The files: tools_def.txt, target.txt and
	build_rule.txt, are only created if they do not exist, if they exist, they
	are not touched.

	First, set up your project workspace. If you have previously initialized this
	WORKSPACE, and a newer version of the *.template files in
	WORKSPACE\BaseTools\Conf exists, remove the *.txt files in the WORKSPACE\Conf
	directory prior to running the edksetup script.

	For the reference build of the Nt32 Platform emulation environment, use the
	edksetup.bat option: --nt32. For building other platforms or modules, this
	option is not required, as Visual Studio standard includes, libraries and/or
	dlls are not required for normal development.

	c:\MyWork\edk2\> edksetup --nt32

	The default tool chain (named MYTOOLS) is pre-configured to use VS2005 for IA32
	and X64 target architectures and the DDK for IPF target architectures. To use a
	different tool chain, either modify the tools_def.txt file's MYTOOLS entries,
	or modify the %WORKSPACE%\Conf\target.txt file's TOOL_CHAIN_TAG. The pre-defined
	tags are listed near the top of the %WORKSPACE%\Conf\tools_def.txt file, below
	the Supported Tool Chains comment.
	Alternatively, you may use the build command's -t option to specify a different
	tool chain tag name: build -t VS2003 ... , for example. Using this method will
	require that you always use the build command's -t option.


	Next, go to the module directory and begin to build. This example is for the
	HelloWorld application.

	c:\MyWork\edk2\> cd MdeModulePkg\Application\HelloWorld
	c:\MyWork\edk2\> build

	If you want to build the a module in another package (for example,
	MdePkg\Library\BaseLib\BaseLib.inf), please edit the file,
	%WORKSPACE%\Conf\Target.txt, first.

	Change the following line
	ACTIVE_PLATFORM = MdeModulePkg/MdeModulePkg.dsc
	to
	ACTIVE_PLATFORM = MdePkg/MdePkg.dsc

	Then go to MdePkg\Library\BaseLib directory and type build:
	c:\MyWork\edk2\> cd MdePkg\Library\BaseLib
	c:\MyWork\edk2\> build

	If you want build a platform, ACTIVE_PLATFORM must be set to your desired
	platform dsc file, go to directory which must be not a module's directory, and
	run "build" command.

	Instead of changing Target.txt, you can specify platform, module and/or
	architecture on command line.
	For example, if you want to build NT32 platform, you can just type

	c:\MyWork\edk2\> build -p Nt32Pkg\Nt32Pkg.dsc -a IA32

	and if you want to build HelloWorld module, you can just type

	c:\MyWork\edk2\> build -p Nt32Pkg\Nt32Pkg.dsc -a IA32 -m MdeModulePkg\Application\HelloWorld\HelloWorld.inf

	Other helpful command line options of build tool include "-v" and "-d".
	The "-v" option is used to turn on the verbose build, which provide more
	information during the build. "-d <debug level 0-9>" option is used to
	turn on the debug information which is helpful debugging build tools.

	For more information on build options, please try "build -h" on command line.

	Note:
	The Windows style help option "/?" is not a valid option for the build
	command.


	-------------------------------------------------------------------------------
	Supported build targets
	-----------------------

	all - Build whole platform or module. It can be ignored.
	genc - Generate AutoGen.c, AutoGen.h and <ModuleName>.depex files only.
	genmake - Generate makefiles in addition to files generated by "genc" target.
	clean - Clean intermediate files
	cleanall - Clean all generated files and directories during build, except the
	generated Makefile files (top level and module makefiles)
	cleanlib - Clean all generated files and directories during library build
	run - Launch NT32 shell (only valid for NT32 platform)

	-------------------------------------------------------------------------------
	Tools in Python
	---------------

	* Run buld tool written in Python from source
	The build tool written in Python can be executed from its source directly as
	long as you have the Python interpreter (version 2.5) installed. The source
	of Python code is locating at:

	http://edk2-buildtools.svn.sourceforge.net/svnroot/edk2-buildtools/trunk/BaseTools

	where:

	build/build.py - The entry tool of build tools

	"build.py" steps:
	1. Run "edksetup.bat"
	2. set PYTHONPATH to the local directory of above source
	(BaseTools/Source/Python)
	3. Set ACTIVE_PLATFORM in WORKSPACE\Conf
	4. Go to platform or module directory
	5. Run "<python_interpreter.exe> <python_source_dir>/build/build.py" or
	"<python_source_dir>/build/build.py" directly.

	* Convert Python source to exe file
	The tools written in Python can be coverted into executable program which can
	be executed without Python interpreter. One of the conversion tools is called
	cx_Freeze, available at:

	http://sourceforge.net/projects/cx-freeze/

	If you have installed cx_Freeze at c:\cx_Freeze-3.0.3. Use the following
	command lines to convert MyBuild.py to a Windows executable.

	set PYTHONPATH=<buildtools>\BaseTools\Source\Python
	c:\cx_Freeze-3.0.3\FreezePython.exe --include-modules=encodings.cp437,encodings.gbk,encodings.utf_16,encodings.utf_8 --install-dir=.\mybuild MyBuild.py

	The generated .exe files are put in "mybuild" subdirectory.