| ## @file | |
| # This is Unix FDF file with UEFI HII features enabled | |
| # | |
| # Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR> | |
| # | |
| # This program and the accompanying materials | |
| # are licensed and made available under the terms and conditions of the BSD License | |
| # which accompanies this distribution. The full text of the license may be found at | |
| # http://opensource.org/licenses/bsd-license.php | |
| # | |
| # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| # | |
| ################################################################################ | |
| # | |
| # FD Section | |
| # The [FD] Section is made up of the definition statements and a | |
| # description of what goes into the Flash Device Image. Each FD section | |
| # defines one flash "device" image. A flash device image may be one of | |
| # the following: Removable media bootable image (like a boot floppy | |
| # image,) an Option ROM image (that would be "flashed" into an add-in | |
| # card,) a System "Flash" image (that would be burned into a system's | |
| # flash) or an Update ("Capsule") image that will be used to update and | |
| # existing system flash. | |
| # | |
| ################################################################################ | |
| [FD.Fv_Recovery] | |
| # | |
| # In OS X PEIMs are really XIP, so we need to make this address match the malloced | |
| # buffer for the FD (0x41000000). If this address does not match the FV will get | |
| # relocated in place (works, but not a great idea). | |
| # | |
| BaseAddress = 0x41000000|gEfiUnixPkgTokenSpaceGuid.PcdUnixFdBaseAddress #The base address of the FLASH Device. | |
| Size = 0x00300000|gEfiUnixPkgTokenSpaceGuid.PcdUnixFirmwareFdSize #The size in bytes of the FLASH Device | |
| ErasePolarity = 1 | |
| BlockSize = 0x10000 | |
| NumBlocks = 0x30 | |
| ################################################################################ | |
| # | |
| # Following are lists of FD Region layout which correspond to the locations of different | |
| # images within the flash device. | |
| # | |
| # Regions must be defined in ascending order and may not overlap. | |
| # | |
| # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by | |
| # the pipe "|" character, followed by the size of the region, also in hex with the leading | |
| # "0x" characters. Like: | |
| # Offset|Size | |
| # PcdOffsetCName|PcdSizeCName | |
| # RegionType <FV, DATA, or FILE> | |
| # | |
| ################################################################################ | |
| 0x00000000|0x002e0000 | |
| gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize | |
| FV = FvRecovery | |
| 0x002e0000|0x0000c000 | |
| gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize | |
| #NV_VARIABLE_STORE | |
| DATA = { | |
| ## This is the EFI_FIRMWARE_VOLUME_HEADER | |
| # ZeroVector [] | |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| # FileSystemGuid: gEfiSystemNvDataFvGuid = | |
| # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} | |
| 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, | |
| 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, | |
| # FvLength: 0x20000 | |
| 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| # Signature "_FVH" #Attributes | |
| 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00, | |
| # HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision | |
| 0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02, | |
| # Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block | |
| 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, | |
| # Blockmap[1]: End | |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| ## This is the VARIABLE_STORE_HEADER | |
| #Signature: gEfiVariableGuid = | |
| # { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} | |
| 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41, | |
| 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d, | |
| #Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xBFB8 | |
| # This can speed up the Variable Dispatch a bit. | |
| 0xB8, 0xBF, 0x00, 0x00, | |
| #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32 | |
| 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
| } | |
| 0x002ec000|0x00002000 | |
| #NV_EVENT_LOG | |
| gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogSize | |
| 0x002ee000|0x00002000 | |
| gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize | |
| #NV_FTW_WORKING | |
| DATA = { | |
| # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid = | |
| # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} | |
| 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, | |
| 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, | |
| # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved | |
| 0x77, 0x13, 0x9B, 0xD7, 0xFE, 0xFF, 0xFF, 0xFF, | |
| # WriteQueueSize: UINT64 | |
| 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
| } | |
| 0x002f0000|0x00010000 | |
| #NV_FTW_SPARE | |
| gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize | |
| ################################################################################ | |
| # | |
| # FV Section | |
| # | |
| # [FV] section is used to define what components or modules are placed within a flash | |
| # device file. This section also defines order the components and modules are positioned | |
| # within the image. The [FV] section consists of define statements, set statements and | |
| # module statements. | |
| # | |
| ################################################################################ | |
| [FV.FvRecovery] | |
| FvAlignment = 16 #FV alignment and FV attributes setting. | |
| ERASE_POLARITY = 1 | |
| MEMORY_MAPPED = TRUE | |
| STICKY_WRITE = TRUE | |
| LOCK_CAP = TRUE | |
| LOCK_STATUS = TRUE | |
| WRITE_DISABLED_CAP = TRUE | |
| WRITE_ENABLED_CAP = TRUE | |
| WRITE_STATUS = TRUE | |
| WRITE_LOCK_CAP = TRUE | |
| WRITE_LOCK_STATUS = TRUE | |
| READ_DISABLED_CAP = TRUE | |
| READ_ENABLED_CAP = TRUE | |
| READ_STATUS = TRUE | |
| READ_LOCK_CAP = TRUE | |
| READ_LOCK_STATUS = TRUE | |
| ################################################################################ | |
| # | |
| # The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image. | |
| # Parsing tools will scan the INF file to determine the type of component or module. | |
| # The component or module type is used to reference the standard rules | |
| # defined elsewhere in the FDF file. | |
| # | |
| # The format for INF statements is: | |
| # INF $(PathAndInfFileName) | |
| # | |
| ################################################################################ | |
| ## | |
| # PEI Phase modules | |
| ## | |
| ## | |
| # PEI Apriori file example, more PEIM module added later. | |
| ## | |
| APRIORI PEI { | |
| INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf | |
| INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf | |
| } | |
| APRIORI DXE { | |
| INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf | |
| INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf | |
| INF UnixPkg/MetronomeDxe/Metronome.inf | |
| } | |
| INF MdeModulePkg/Core/Pei/PeiMain.inf | |
| INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf | |
| INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf | |
| INF UnixPkg/BootModePei/BootModePei.inf | |
| INF UnixPkg/UnixFlashMapPei/FlashMap.inf | |
| INF UnixPkg/UnixAutoScanPei/UnixAutoScan.inf | |
| INF UnixPkg/UnixFirmwareVolumePei/UnixFwh.inf | |
| INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf | |
| INF UnixPkg/UnixThunkPpiToProtocolPei/UnixThunkPpiToProtocol.inf | |
| INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | |
| ## | |
| # DXE Phase modules | |
| ## | |
| INF MdeModulePkg/Core/Dxe/DxeMain.inf | |
| INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf | |
| INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf | |
| INF UnixPkg/MetronomeDxe/Metronome.inf | |
| INF UnixPkg/RealTimeClockRuntimeDxe/RealTimeClock.inf | |
| INF UnixPkg/ResetRuntimeDxe/Reset.inf | |
| INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf | |
| INF UnixPkg/FvbServicesRuntimeDxe/UnixFwh.inf | |
| INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf | |
| INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf | |
| INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf | |
| INF UnixPkg/UnixThunkDxe/UnixThunk.inf | |
| INF UnixPkg/CpuRuntimeDxe/Cpu.inf | |
| INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf | |
| INF UnixPkg/MiscSubClassPlatformDxe/MiscSubClassDriver.inf | |
| INF UnixPkg/TimerDxe/Timer.inf | |
| INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf | |
| INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf | |
| INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf | |
| INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf | |
| INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf | |
| INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf | |
| INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf | |
| INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf | |
| INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf | |
| INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf | |
| INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf | |
| INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf | |
| INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf | |
| INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf | |
| INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | |
| INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf | |
| INF UnixPkg/UnixBusDriverDxe/UnixBusDriver.inf | |
| INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf | |
| INF UnixPkg/UnixBlockIoDxe/UnixBlockIo.inf | |
| INF UnixPkg/UnixSerialIoDxe/UnixSerialIo.inf | |
| #INF UnixPkg/UnixUgaDxe/UnixUga.inf | |
| INF UnixPkg/UnixGopDxe/UnixGop.inf | |
| #INF UnixPkg/UnixConsoleDxe/UnixConsole.inf | |
| INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf | |
| INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf | |
| INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf | |
| INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf | |
| INF UnixPkg/UnixSimpleFileSystemDxe/UnixSimpleFileSystem.inf | |
| INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf | |
| INF MdeModulePkg/Application/HelloWorld/HelloWorld.inf | |
| # | |
| # Network stack drivers | |
| # | |
| !if $(NETWORK_SUPPORT) | |
| INF UnixPkg/UnixSnpDxe/UnixSnpDxe.inf | |
| !endif | |
| INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf | |
| INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf | |
| INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf | |
| INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf | |
| INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf | |
| INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf | |
| INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf | |
| INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf | |
| INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf | |
| INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf | |
| # | |
| # Build from source or use checked in binary | |
| # | |
| !if $(COMPILE_BINS) | |
| INF FatPkg/EnhancedFatDxe/Fat.inf | |
| !else | |
| INF RuleOverride = BINARY USE = IA32 FatBinPkg/EnhancedFatDxe/Fat.inf | |
| !endif | |
| # If you build GccShellPkg you can source level debug shell | |
| #FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) { | |
| # SECTION PE32 =Build/GccShellPkg/DEBUG_XCODE32/IA32/ShellFull.efi | |
| #} | |
| INF RuleOverride = BINARY USE = IA32 EdkShellBinPkg/FullShell/FullShell.inf | |
| FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) { | |
| SECTION RAW = MdeModulePkg/Logo/Logo.bmp | |
| } | |
| ################################################################################ | |
| # | |
| # Rules are use with the [FV] section's module INF type to define | |
| # how an FFS file is created for a given INF file. The following Rule are the default | |
| # rules for the different module type. User can add the customized rules to define the | |
| # content of the FFS file. | |
| # | |
| ################################################################################ | |
| ############################################################################ | |
| # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # | |
| ############################################################################ | |
| # | |
| #[Rule.Common.DXE_DRIVER] | |
| # FILE DRIVER = $(NAMED_GUID) { | |
| # DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
| # COMPRESS PI_STD { | |
| # GUIDED { | |
| # PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| # UI STRING="$(MODULE_NAME)" Optional | |
| # VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| # } | |
| # } | |
| # } | |
| # | |
| ############################################################################ | |
| [Rule.Common.PEI_CORE] | |
| FILE PEI_CORE = $(NAMED_GUID) { | |
| PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING ="$(MODULE_NAME)" Optional | |
| VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| [Rule.Common.PEIM] | |
| FILE PEIM = $(NAMED_GUID) { | |
| PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
| PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| [Rule.Common.DXE_CORE] | |
| FILE DXE_CORE = $(NAMED_GUID) { | |
| COMPRESS PI_STD { | |
| PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| } | |
| [Rule.Common.UEFI_DRIVER] | |
| FILE DRIVER = $(NAMED_GUID) { | |
| DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
| COMPRESS PI_STD { | |
| GUIDED { | |
| PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| } | |
| } | |
| [Rule.Common.DXE_DRIVER] | |
| FILE DRIVER = $(NAMED_GUID) { | |
| DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
| COMPRESS PI_STD { | |
| GUIDED { | |
| PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| } | |
| } | |
| [Rule.Common.DXE_RUNTIME_DRIVER] | |
| FILE DRIVER = $(NAMED_GUID) { | |
| DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
| COMPRESS PI_STD { | |
| GUIDED { | |
| PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| } | |
| } | |
| [Rule.Common.UEFI_APPLICATION] | |
| FILE APPLICATION = $(NAMED_GUID) { | |
| COMPRESS PI_STD { | |
| GUIDED { | |
| PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| } | |
| } | |
| [Rule.Common.UEFI_DRIVER.BINARY] | |
| FILE DRIVER = $(NAMED_GUID) { | |
| DXE_DEPEX DXE_DEPEX Optional |.depex | |
| PE32 PE32 |.efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |
| [Rule.Common.UEFI_APPLICATION.BINARY] | |
| FILE APPLICATION = $(NAMED_GUID) { | |
| PE32 PE32 |.efi | |
| UI STRING="$(MODULE_NAME)" Optional | |
| VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
| } | |