| /** @file | |
| Copyright (c) 2006, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| Module Name: AtapiPassThru.h | |
| **/ | |
| #ifndef _APT_H | |
| #define _APT_H | |
| #include <Uefi.h> | |
| #include <Protocol/ScsiPassThru.h> | |
| #include <Protocol/ScsiPassThruExt.h> | |
| #include <Protocol/PciIo.h> | |
| #include <Protocol/DriverSupportedEfiVersion.h> | |
| #include <Library/DebugLib.h> | |
| #include <Library/UefiDriverEntryPoint.h> | |
| #include <Library/BaseLib.h> | |
| #include <Library/UefiLib.h> | |
| #include <Library/BaseMemoryLib.h> | |
| #include <Library/MemoryAllocationLib.h> | |
| #include <Library/UefiBootServicesTableLib.h> | |
| #include <Library/PcdLib.h> | |
| #include <IndustryStandard/pci22.h> | |
| /// | |
| /// bit definition | |
| /// | |
| #define bit(a) (1 << (a)) | |
| #define MAX_TARGET_ID 4 | |
| // | |
| // IDE Registers | |
| // | |
| typedef union { | |
| UINT16 Command; /* when write */ | |
| UINT16 Status; /* when read */ | |
| } IDE_CMD_OR_STATUS; | |
| typedef union { | |
| UINT16 Error; /* when read */ | |
| UINT16 Feature; /* when write */ | |
| } IDE_ERROR_OR_FEATURE; | |
| typedef union { | |
| UINT16 AltStatus; /* when read */ | |
| UINT16 DeviceControl; /* when write */ | |
| } IDE_AltStatus_OR_DeviceControl; | |
| typedef enum { | |
| IdePrimary = 0, | |
| IdeSecondary = 1, | |
| IdeMaxChannel = 2 | |
| } EFI_IDE_CHANNEL; | |
| /// | |
| // | |
| // Bit definitions in Programming Interface byte of the Class Code field | |
| // in PCI IDE controller's Configuration Space | |
| // | |
| #define IDE_PRIMARY_OPERATING_MODE BIT0 | |
| #define IDE_PRIMARY_PROGRAMMABLE_INDICATOR BIT1 | |
| #define IDE_SECONDARY_OPERATING_MODE BIT2 | |
| #define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3 | |
| #define ATAPI_MAX_CHANNEL 2 | |
| /// | |
| /// IDE registers set | |
| /// | |
| typedef struct { | |
| UINT16 Data; | |
| IDE_ERROR_OR_FEATURE Reg1; | |
| UINT16 SectorCount; | |
| UINT16 SectorNumber; | |
| UINT16 CylinderLsb; | |
| UINT16 CylinderMsb; | |
| UINT16 Head; | |
| IDE_CMD_OR_STATUS Reg; | |
| IDE_AltStatus_OR_DeviceControl Alt; | |
| UINT16 DriveAddress; | |
| } IDE_BASE_REGISTERS; | |
| #define ATAPI_SCSI_PASS_THRU_DEV_SIGNATURE EFI_SIGNATURE_32 ('a', 's', 'p', 't') | |
| typedef struct { | |
| UINTN Signature; | |
| EFI_HANDLE Handle; | |
| EFI_SCSI_PASS_THRU_PROTOCOL ScsiPassThru; | |
| EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| UINT64 OriginalPciAttributes; | |
| // | |
| // Local Data goes here | |
| // | |
| IDE_BASE_REGISTERS *IoPort; | |
| IDE_BASE_REGISTERS AtapiIoPortRegisters[2]; | |
| UINT32 LatestTargetId; | |
| UINT64 LatestLun; | |
| } ATAPI_SCSI_PASS_THRU_DEV; | |
| // | |
| // IDE registers' base addresses | |
| // | |
| typedef struct { | |
| UINT16 CommandBlockBaseAddr; | |
| UINT16 ControlBlockBaseAddr; | |
| } IDE_REGISTERS_BASE_ADDR; | |
| #define ATAPI_SCSI_PASS_THRU_DEV_FROM_THIS(a) \ | |
| CR (a, \ | |
| ATAPI_SCSI_PASS_THRU_DEV, \ | |
| ScsiPassThru, \ | |
| ATAPI_SCSI_PASS_THRU_DEV_SIGNATURE \ | |
| ) | |
| #define ATAPI_EXT_SCSI_PASS_THRU_DEV_FROM_THIS(a) \ | |
| CR (a, \ | |
| ATAPI_SCSI_PASS_THRU_DEV, \ | |
| ExtScsiPassThru, \ | |
| ATAPI_SCSI_PASS_THRU_DEV_SIGNATURE \ | |
| ) | |
| // | |
| // Global Variables | |
| // | |
| extern EFI_DRIVER_BINDING_PROTOCOL gAtapiScsiPassThruDriverBinding; | |
| extern EFI_COMPONENT_NAME_PROTOCOL gAtapiScsiPassThruComponentName; | |
| extern EFI_COMPONENT_NAME2_PROTOCOL gAtapiScsiPassThruComponentName2; | |
| extern EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL gAtapiScsiPassThruDriverSupportedEfiVersion; | |
| // | |
| // ATAPI Command op code | |
| // | |
| #define OP_INQUIRY 0x12 | |
| #define OP_LOAD_UNLOAD_CD 0xa6 | |
| #define OP_MECHANISM_STATUS 0xbd | |
| #define OP_MODE_SELECT_10 0x55 | |
| #define OP_MODE_SENSE_10 0x5a | |
| #define OP_PAUSE_RESUME 0x4b | |
| #define OP_PLAY_AUDIO_10 0x45 | |
| #define OP_PLAY_AUDIO_MSF 0x47 | |
| #define OP_PLAY_CD 0xbc | |
| #define OP_PLAY_CD_MSF 0xb4 | |
| #define OP_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e | |
| #define OP_READ_10 0x28 | |
| #define OP_READ_12 0xa8 | |
| #define OP_READ_CAPACITY 0x25 | |
| #define OP_READ_CD 0xbe | |
| #define OP_READ_CD_MSF 0xb9 | |
| #define OP_READ_HEADER 0x44 | |
| #define OP_READ_SUB_CHANNEL 0x42 | |
| #define OP_READ_TOC 0x43 | |
| #define OP_REQUEST_SENSE 0x03 | |
| #define OP_SCAN 0xba | |
| #define OP_SEEK_10 0x2b | |
| #define OP_SET_CD_SPEED 0xbb | |
| #define OP_STOPPLAY_SCAN 0x4e | |
| #define OP_START_STOP_UNIT 0x1b | |
| #define OP_TEST_UNIT_READY 0x00 | |
| #define OP_FORMAT_UNIT 0x04 | |
| #define OP_READ_FORMAT_CAPACITIES 0x23 | |
| #define OP_VERIFY 0x2f | |
| #define OP_WRITE_10 0x2a | |
| #define OP_WRITE_12 0xaa | |
| #define OP_WRITE_AND_VERIFY 0x2e | |
| // | |
| // ATA Command | |
| // | |
| #define ATAPI_SOFT_RESET_CMD 0x08 | |
| typedef enum { | |
| DataIn = 0, | |
| DataOut = 1, | |
| DataBi = 2, | |
| NoData = 3, | |
| End = 0xff | |
| } DATA_DIRECTION; | |
| typedef struct { | |
| UINT8 OpCode; | |
| DATA_DIRECTION Direction; | |
| } SCSI_COMMAND_SET; | |
| #define MAX_CHANNEL 2 | |
| #define ValidCdbLength(Len) ((Len) == 6 || (Len) == 10 || (Len) == 12) ? 1 : 0 | |
| // | |
| // IDE registers bit definitions | |
| // | |
| // ATA Err Reg bitmap | |
| // | |
| #define BBK_ERR bit (7) ///< Bad block detected | |
| #define UNC_ERR bit (6) ///< Uncorrectable Data | |
| #define MC_ERR bit (5) ///< Media Change | |
| #define IDNF_ERR bit (4) ///< ID Not Found | |
| #define MCR_ERR bit (3) ///< Media Change Requested | |
| #define ABRT_ERR bit (2) ///< Aborted Command | |
| #define TK0NF_ERR bit (1) ///< Track 0 Not Found | |
| #define AMNF_ERR bit (0) ///< Address Mark Not Found | |
| // | |
| // ATAPI Err Reg bitmap | |
| // | |
| #define SENSE_KEY_ERR (bit (7) | bit (6) | bit (5) | bit (4)) | |
| #define EOM_ERR bit (1) ///< End of Media Detected | |
| #define ILI_ERR bit (0) ///< Illegal Length Indication | |
| // | |
| // Device/Head Reg | |
| // | |
| #define LBA_MODE bit (6) | |
| #define DEV bit (4) | |
| #define HS3 bit (3) | |
| #define HS2 bit (2) | |
| #define HS1 bit (1) | |
| #define HS0 bit (0) | |
| #define CHS_MODE (0) | |
| #define DRV0 (0) | |
| #define DRV1 (1) | |
| #define MST_DRV DRV0 | |
| #define SLV_DRV DRV1 | |
| // | |
| // Status Reg | |
| // | |
| #define BSY bit (7) ///< Controller Busy | |
| #define DRDY bit (6) ///< Drive Ready | |
| #define DWF bit (5) ///< Drive Write Fault | |
| #define DSC bit (4) ///< Disk Seek Complete | |
| #define DRQ bit (3) ///< Data Request | |
| #define CORR bit (2) ///< Corrected Data | |
| #define IDX bit (1) ///< Index | |
| #define ERR bit (0) ///< Error | |
| #define CHECK bit (0) ///< Check bit for ATAPI Status Reg | |
| // | |
| // Device Control Reg | |
| // | |
| #define SRST bit (2) ///< Software Reset | |
| #define IEN_L bit (1) ///< Interrupt Enable | |
| // | |
| // ATAPI Feature Register | |
| // | |
| #define OVERLAP bit (1) | |
| #define DMA bit (0) | |
| // | |
| // ATAPI Interrupt Reason Reson Reg (ATA Sector Count Register) | |
| // | |
| #define RELEASE bit (2) | |
| #define IO bit (1) | |
| #define CoD bit (0) | |
| #define PACKET_CMD 0xA0 | |
| #define DEFAULT_CMD (0xa0) | |
| // | |
| // default content of device control register, disable INT | |
| // | |
| #define DEFAULT_CTL (0x0a) | |
| #define MAX_ATAPI_BYTE_COUNT (0xfffe) | |
| // | |
| // function prototype | |
| // | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ); | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ); | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ); | |
| // | |
| // EFI Component Name Functions | |
| // | |
| /** | |
| Retrieves a Unicode string that is the user readable name of the driver. | |
| This function retrieves the user readable name of a driver in the form of a | |
| Unicode string. If the driver specified by This has a user readable name in | |
| the language specified by Language, then a pointer to the driver name is | |
| returned in DriverName, and EFI_SUCCESS is returned. If the driver specified | |
| by This does not support the language specified by Language, | |
| then EFI_UNSUPPORTED is returned. | |
| @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or | |
| EFI_COMPONENT_NAME_PROTOCOL instance. | |
| @param Language[in] A pointer to a Null-terminated ASCII string | |
| array indicating the language. This is the | |
| language of the driver name that the caller is | |
| requesting, and it must match one of the | |
| languages specified in SupportedLanguages. The | |
| number of languages supported by a driver is up | |
| to the driver writer. Language is specified | |
| in RFC 3066 or ISO 639-2 language code format. | |
| @param DriverName[out] A pointer to the Unicode string to return. | |
| This Unicode string is the name of the | |
| driver specified by This in the language | |
| specified by Language. | |
| @retval EFI_SUCCESS The Unicode string for the Driver specified by | |
| This and the language specified by Language was | |
| returned in DriverName. | |
| @retval EFI_INVALID_PARAMETER Language is NULL. | |
| @retval EFI_INVALID_PARAMETER DriverName is NULL. | |
| @retval EFI_UNSUPPORTED The driver specified by This does not support | |
| the language specified by Language. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruComponentNameGetDriverName ( | |
| IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
| IN CHAR8 *Language, | |
| OUT CHAR16 **DriverName | |
| ); | |
| /** | |
| Retrieves a Unicode string that is the user readable name of the controller | |
| that is being managed by a driver. | |
| This function retrieves the user readable name of the controller specified by | |
| ControllerHandle and ChildHandle in the form of a Unicode string. If the | |
| driver specified by This has a user readable name in the language specified by | |
| Language, then a pointer to the controller name is returned in ControllerName, | |
| and EFI_SUCCESS is returned. If the driver specified by This is not currently | |
| managing the controller specified by ControllerHandle and ChildHandle, | |
| then EFI_UNSUPPORTED is returned. If the driver specified by This does not | |
| support the language specified by Language, then EFI_UNSUPPORTED is returned. | |
| @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or | |
| EFI_COMPONENT_NAME_PROTOCOL instance. | |
| @param ControllerHandle[in] The handle of a controller that the driver | |
| specified by This is managing. This handle | |
| specifies the controller whose name is to be | |
| returned. | |
| @param ChildHandle[in] The handle of the child controller to retrieve | |
| the name of. This is an optional parameter that | |
| may be NULL. It will be NULL for device | |
| drivers. It will also be NULL for a bus drivers | |
| that wish to retrieve the name of the bus | |
| controller. It will not be NULL for a bus | |
| driver that wishes to retrieve the name of a | |
| child controller. | |
| @param Language[in] A pointer to a Null-terminated ASCII string | |
| array indicating the language. This is the | |
| language of the driver name that the caller is | |
| requesting, and it must match one of the | |
| languages specified in SupportedLanguages. The | |
| number of languages supported by a driver is up | |
| to the driver writer. Language is specified in | |
| RFC 3066 or ISO 639-2 language code format. | |
| @param ControllerName[out] A pointer to the Unicode string to return. | |
| This Unicode string is the name of the | |
| controller specified by ControllerHandle and | |
| ChildHandle in the language specified by | |
| Language from the point of view of the driver | |
| specified by This. | |
| @retval EFI_SUCCESS The Unicode string for the user readable name in | |
| the language specified by Language for the | |
| driver specified by This was returned in | |
| DriverName. | |
| @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE. | |
| @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid | |
| EFI_HANDLE. | |
| @retval EFI_INVALID_PARAMETER Language is NULL. | |
| @retval EFI_INVALID_PARAMETER ControllerName is NULL. | |
| @retval EFI_UNSUPPORTED The driver specified by This is not currently | |
| managing the controller specified by | |
| ControllerHandle and ChildHandle. | |
| @retval EFI_UNSUPPORTED The driver specified by This does not support | |
| the language specified by Language. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruComponentNameGetControllerName ( | |
| IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_HANDLE ChildHandle OPTIONAL, | |
| IN CHAR8 *Language, | |
| OUT CHAR16 **ControllerName | |
| ); | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruDriverEntryPoint ( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| /*++ | |
| Routine Description: | |
| Entry point for EFI drivers. | |
| Arguments: | |
| ImageHandle - EFI_HANDLE | |
| SystemTable - EFI_SYSTEM_TABLE | |
| Returns: | |
| EFI_SUCCESS | |
| Others | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| RegisterAtapiScsiPassThru ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN UINT64 OriginalPciAttributes | |
| ) | |
| /*++ | |
| Routine Description: | |
| Attaches SCSI Pass Thru Protocol for specified IDE channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Controller - Parent device handle to the IDE channel. | |
| PciIo - PCI I/O protocol attached on the "Controller". | |
| Returns: | |
| Always return EFI_SUCCESS unless installing SCSI Pass Thru Protocol failed. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruFunction ( | |
| IN EFI_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT32 Target, | |
| IN UINT64 Lun, | |
| IN OUT EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, | |
| IN EFI_EVENT Event OPTIONAL | |
| ) | |
| /*++ | |
| Routine Description: | |
| Implements EFI_SCSI_PASS_THRU_PROTOCOL.PassThru() function. | |
| Arguments: | |
| This: The EFI_SCSI_PASS_THRU_PROTOCOL instance. | |
| Target: The Target ID of the ATAPI device to send the SCSI | |
| Request Packet. To ATAPI devices attached on an IDE | |
| Channel, Target ID 0 indicates Master device;Target | |
| ID 1 indicates Slave device. | |
| Lun: The LUN of the ATAPI device to send the SCSI Request | |
| Packet. To the ATAPI device, Lun is always 0. | |
| Packet: The SCSI Request Packet to send to the ATAPI device | |
| specified by Target and Lun. | |
| Event: If non-blocking I/O is not supported then Event is ignored, | |
| and blocking I/O is performed. | |
| If Event is NULL, then blocking I/O is performed. | |
| If Event is not NULL and non blocking I/O is supported, | |
| then non-blocking I/O is performed, and Event will be signaled | |
| when the SCSI Request Packet completes. | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruGetNextDevice ( | |
| IN EFI_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN OUT UINT32 *Target, | |
| IN OUT UINT64 *Lun | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to retrieve the list of legal Target IDs for SCSI devices | |
| on a SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - On input, a pointer to the Target ID of a SCSI | |
| device present on the SCSI channel. On output, | |
| a pointer to the Target ID of the next SCSI device | |
| present on a SCSI channel. An input value of | |
| 0xFFFFFFFF retrieves the Target ID of the first | |
| SCSI device present on a SCSI channel. | |
| Lun - On input, a pointer to the LUN of a SCSI device | |
| present on the SCSI channel. On output, a pointer | |
| to the LUN of the next SCSI device present on | |
| a SCSI channel. | |
| Returns: | |
| EFI_SUCCESS - The Target ID and Lun of the next SCSI device | |
| on the SCSI channel was returned in Target and Lun. | |
| EFI_NOT_FOUND - There are no more SCSI devices on this SCSI channel. | |
| EFI_INVALID_PARAMETER - Target is not 0xFFFFFFFF,and Target and Lun were not | |
| returned on a previous call to GetNextDevice(). | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruBuildDevicePath ( | |
| IN EFI_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT32 Target, | |
| IN UINT64 Lun, | |
| IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to allocate and build a device path node for a SCSI device | |
| on a SCSI channel. Would not build device path for a SCSI Host Controller. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - The Target ID of the SCSI device for which | |
| a device path node is to be allocated and built. | |
| Lun - The LUN of the SCSI device for which a device | |
| path node is to be allocated and built. | |
| DevicePath - A pointer to a single device path node that | |
| describes the SCSI device specified by | |
| Target and Lun. This function is responsible | |
| for allocating the buffer DevicePath with the boot | |
| service AllocatePool(). It is the caller's | |
| responsibility to free DevicePath when the caller | |
| is finished with DevicePath. | |
| Returns: | |
| EFI_SUCCESS - The device path node that describes the SCSI device | |
| specified by Target and Lun was allocated and | |
| returned in DevicePath. | |
| EFI_NOT_FOUND - The SCSI devices specified by Target and Lun does | |
| not exist on the SCSI channel. | |
| EFI_INVALID_PARAMETER - DevicePath is NULL. | |
| EFI_OUT_OF_RESOURCES - There are not enough resources to allocate | |
| DevicePath. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruGetTargetLun ( | |
| IN EFI_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, | |
| OUT UINT32 *Target, | |
| OUT UINT64 *Lun | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to translate a device path node to a Target ID and LUN. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| DevicePath - A pointer to the device path node that | |
| describes a SCSI device on the SCSI channel. | |
| Target - A pointer to the Target ID of a SCSI device | |
| on the SCSI channel. | |
| Lun - A pointer to the LUN of a SCSI device on | |
| the SCSI channel. | |
| Returns: | |
| EFI_SUCCESS - DevicePath was successfully translated to a | |
| Target ID and LUN, and they were returned | |
| in Target and Lun. | |
| EFI_INVALID_PARAMETER - DevicePath/Target/Lun is NULL. | |
| EFI_UNSUPPORTED - This driver does not support the device path | |
| node type in DevicePath. | |
| EFI_NOT_FOUND - A valid translation from DevicePath to a | |
| Target ID and LUN does not exist. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruResetChannel ( | |
| IN EFI_SCSI_PASS_THRU_PROTOCOL *This | |
| ) | |
| /*++ | |
| Routine Description: | |
| Resets a SCSI channel.This operation resets all the | |
| SCSI devices connected to the SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Returns: | |
| EFI_SUCCESS - The SCSI channel was reset. | |
| EFI_UNSUPPORTED - The SCSI channel does not support | |
| a channel reset operation. | |
| EFI_DEVICE_ERROR - A device error occurred while | |
| attempting to reset the SCSI channel. | |
| EFI_TIMEOUT - A timeout occurred while attempting | |
| to reset the SCSI channel. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiScsiPassThruResetTarget ( | |
| IN EFI_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT32 Target, | |
| IN UINT64 Lun | |
| ) | |
| /*++ | |
| Routine Description: | |
| Resets a SCSI device that is connected to a SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - The Target ID of the SCSI device to reset. | |
| Lun - The LUN of the SCSI device to reset. | |
| Returns: | |
| EFI_SUCCESS - The SCSI device specified by Target and | |
| Lun was reset. | |
| EFI_UNSUPPORTED - The SCSI channel does not support a target | |
| reset operation. | |
| EFI_INVALID_PARAMETER - Target or Lun are invalid. | |
| EFI_DEVICE_ERROR - A device error occurred while attempting | |
| to reset the SCSI device specified by Target | |
| and Lun. | |
| EFI_TIMEOUT - A timeout occurred while attempting to reset | |
| the SCSI device specified by Target and Lun. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruFunction ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 *Target, | |
| IN UINT64 Lun, | |
| IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, | |
| IN EFI_EVENT Event OPTIONAL | |
| ) | |
| /*++ | |
| Routine Description: | |
| Implements EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() function. | |
| Arguments: | |
| This: The EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. | |
| Target: The Target ID of the ATAPI device to send the SCSI | |
| Request Packet. To ATAPI devices attached on an IDE | |
| Channel, Target ID 0 indicates Master device;Target | |
| ID 1 indicates Slave device. | |
| Lun: The LUN of the ATAPI device to send the SCSI Request | |
| Packet. To the ATAPI device, Lun is always 0. | |
| Packet: The SCSI Request Packet to send to the ATAPI device | |
| specified by Target and Lun. | |
| Event: If non-blocking I/O is not supported then Event is ignored, | |
| and blocking I/O is performed. | |
| If Event is NULL, then blocking I/O is performed. | |
| If Event is not NULL and non blocking I/O is supported, | |
| then non-blocking I/O is performed, and Event will be signaled | |
| when the SCSI Request Packet completes. | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruGetNextTargetLun ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN OUT UINT8 **Target, | |
| IN OUT UINT64 *Lun | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to retrieve the list of legal Target IDs for SCSI devices | |
| on a SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - On input, a pointer to the Target ID of a SCSI | |
| device present on the SCSI channel. On output, | |
| a pointer to the Target ID of the next SCSI device | |
| present on a SCSI channel. An input value of | |
| 0xFFFFFFFF retrieves the Target ID of the first | |
| SCSI device present on a SCSI channel. | |
| Lun - On input, a pointer to the LUN of a SCSI device | |
| present on the SCSI channel. On output, a pointer | |
| to the LUN of the next SCSI device present on | |
| a SCSI channel. | |
| Returns: | |
| EFI_SUCCESS - The Target ID and Lun of the next SCSI device | |
| on the SCSI channel was returned in Target and Lun. | |
| EFI_NOT_FOUND - There are no more SCSI devices on this SCSI channel. | |
| EFI_INVALID_PARAMETER - Target is not 0xFFFFFFFF,and Target and Lun were not | |
| returned on a previous call to GetNextDevice(). | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruBuildDevicePath ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 *Target, | |
| IN UINT64 Lun, | |
| IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to allocate and build a device path node for a SCSI device | |
| on a SCSI channel. Would not build device path for a SCSI Host Controller. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - The Target ID of the SCSI device for which | |
| a device path node is to be allocated and built. | |
| Lun - The LUN of the SCSI device for which a device | |
| path node is to be allocated and built. | |
| DevicePath - A pointer to a single device path node that | |
| describes the SCSI device specified by | |
| Target and Lun. This function is responsible | |
| for allocating the buffer DevicePath with the boot | |
| service AllocatePool(). It is the caller's | |
| responsibility to free DevicePath when the caller | |
| is finished with DevicePath. | |
| Returns: | |
| EFI_SUCCESS - The device path node that describes the SCSI device | |
| specified by Target and Lun was allocated and | |
| returned in DevicePath. | |
| EFI_NOT_FOUND - The SCSI devices specified by Target and Lun does | |
| not exist on the SCSI channel. | |
| EFI_INVALID_PARAMETER - DevicePath is NULL. | |
| EFI_OUT_OF_RESOURCES - There are not enough resources to allocate | |
| DevicePath. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruGetTargetLun ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, | |
| OUT UINT8 **Target, | |
| OUT UINT64 *Lun | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to translate a device path node to a Target ID and LUN. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| DevicePath - A pointer to the device path node that | |
| describes a SCSI device on the SCSI channel. | |
| Target - A pointer to the Target ID of a SCSI device | |
| on the SCSI channel. | |
| Lun - A pointer to the LUN of a SCSI device on | |
| the SCSI channel. | |
| Returns: | |
| EFI_SUCCESS - DevicePath was successfully translated to a | |
| Target ID and LUN, and they were returned | |
| in Target and Lun. | |
| EFI_INVALID_PARAMETER - DevicePath/Target/Lun is NULL. | |
| EFI_UNSUPPORTED - This driver does not support the device path | |
| node type in DevicePath. | |
| EFI_NOT_FOUND - A valid translation from DevicePath to a | |
| Target ID and LUN does not exist. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruResetChannel ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This | |
| ) | |
| /*++ | |
| Routine Description: | |
| Resets a SCSI channel.This operation resets all the | |
| SCSI devices connected to the SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Returns: | |
| EFI_SUCCESS - The SCSI channel was reset. | |
| EFI_UNSUPPORTED - The SCSI channel does not support | |
| a channel reset operation. | |
| EFI_DEVICE_ERROR - A device error occurred while | |
| attempting to reset the SCSI channel. | |
| EFI_TIMEOUT - A timeout occurred while attempting | |
| to reset the SCSI channel. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruResetTarget ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 *Target, | |
| IN UINT64 Lun | |
| ) | |
| /*++ | |
| Routine Description: | |
| Resets a SCSI device that is connected to a SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - The Target ID of the SCSI device to reset. | |
| Lun - The LUN of the SCSI device to reset. | |
| Returns: | |
| EFI_SUCCESS - The SCSI device specified by Target and | |
| Lun was reset. | |
| EFI_UNSUPPORTED - The SCSI channel does not support a target | |
| reset operation. | |
| EFI_INVALID_PARAMETER - Target or Lun are invalid. | |
| EFI_DEVICE_ERROR - A device error occurred while attempting | |
| to reset the SCSI device specified by Target | |
| and Lun. | |
| EFI_TIMEOUT - A timeout occurred while attempting to reset | |
| the SCSI device specified by Target and Lun. | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiExtScsiPassThruGetNextTarget ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN OUT UINT8 **Target | |
| ) | |
| /*++ | |
| Routine Description: | |
| Used to retrieve the list of legal Target IDs for SCSI devices | |
| on a SCSI channel. | |
| Arguments: | |
| This - Protocol instance pointer. | |
| Target - On input, a pointer to the Target ID of a SCSI | |
| device present on the SCSI channel. On output, | |
| a pointer to the Target ID of the next SCSI device | |
| present on a SCSI channel. An input value of | |
| 0xFFFFFFFF retrieves the Target ID of the first | |
| SCSI device present on a SCSI channel. | |
| Lun - On input, a pointer to the LUN of a SCSI device | |
| present on the SCSI channel. On output, a pointer | |
| to the LUN of the next SCSI device present on | |
| a SCSI channel. | |
| Returns: | |
| EFI_SUCCESS - The Target ID and Lun of the next SCSI device | |
| on the SCSI channel was returned in Target and Lun. | |
| EFI_NOT_FOUND - There are no more SCSI devices on this SCSI channel. | |
| EFI_INVALID_PARAMETER - Target is not 0xFFFFFFFF,and Target and Lun were not | |
| returned on a previous call to GetNextDevice(). | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| CheckSCSIRequestPacket ( | |
| EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet | |
| ) | |
| /*++ | |
| Routine Description: | |
| Checks the parameters in the SCSI Request Packet to make sure | |
| they are valid for a SCSI Pass Thru request. | |
| Arguments: | |
| Packet - The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| SubmitBlockingIoCommand ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT32 Target, | |
| EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs blocking I/O request. | |
| Arguments: | |
| AtapiScsiPrivate: Private data structure for the specified channel. | |
| Target: The Target ID of the ATAPI device to send the SCSI | |
| Request Packet. To ATAPI devices attached on an IDE | |
| Channel, Target ID 0 indicates Master device;Target | |
| ID 1 indicates Slave device. | |
| Packet: The SCSI Request Packet to send to the ATAPI device | |
| specified by Target. | |
| Returns: EFI_STATUS | |
| --*/ | |
| ; | |
| BOOLEAN | |
| IsCommandValid ( | |
| EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet | |
| ) | |
| /*++ | |
| Routine Description: | |
| Checks the requested SCSI command: | |
| Is it supported by this driver? | |
| Is the Data transfer direction reasonable? | |
| Arguments: | |
| Packet - The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| CheckExtSCSIRequestPacket ( | |
| EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet | |
| ) | |
| /*++ | |
| Routine Description: | |
| Checks the parameters in the SCSI Request Packet to make sure | |
| they are valid for a SCSI Pass Thru request. | |
| Arguments: | |
| Packet - The pointer of EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| BOOLEAN | |
| IsExtCommandValid ( | |
| EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet | |
| ) | |
| /*++ | |
| Routine Description: | |
| Checks the requested SCSI command: | |
| Is it supported by this driver? | |
| Is the Data transfer direction reasonable? | |
| Arguments: | |
| Packet - The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| SubmitExtBlockingIoCommand ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT8 Target, | |
| EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs blocking I/O request. | |
| Arguments: | |
| AtapiScsiPrivate: Private data structure for the specified channel. | |
| Target: The Target ID of the ATAPI device to send the SCSI | |
| Request Packet. To ATAPI devices attached on an IDE | |
| Channel, Target ID 0 indicates Master device;Target | |
| ID 1 indicates Slave device. | |
| Packet: The SCSI Request Packet to send to the ATAPI device | |
| specified by Target. | |
| Returns: EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| RequestSenseCommand ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT32 Target, | |
| UINT64 Timeout, | |
| VOID *SenseData, | |
| UINT8 *SenseDataLength | |
| ) | |
| /*++ | |
| Routine Description: | |
| Sumbit request sense command | |
| Arguments: | |
| AtapiScsiPrivate - The pionter of ATAPI_SCSI_PASS_THRU_DEV | |
| Target - The target ID | |
| Timeout - The time to complete the command | |
| SenseData - The buffer to fill in sense data | |
| SenseDataLength - The length of buffer | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AtapiPacketCommand ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT32 Target, | |
| UINT8 *PacketCommand, | |
| VOID *Buffer, | |
| UINT32 *ByteCount, | |
| DATA_DIRECTION Direction, | |
| UINT64 TimeOutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Submits ATAPI command packet to the specified ATAPI device. | |
| Arguments: | |
| AtapiScsiPrivate: Private data structure for the specified channel. | |
| Target: The Target ID of the ATAPI device to send the SCSI | |
| Request Packet. To ATAPI devices attached on an IDE | |
| Channel, Target ID 0 indicates Master device;Target | |
| ID 1 indicates Slave device. | |
| PacketCommand: Points to the ATAPI command packet. | |
| Buffer: Points to the transferred data. | |
| ByteCount: When input,indicates the buffer size; when output, | |
| indicates the actually transferred data size. | |
| Direction: Indicates the data transfer direction. | |
| TimeoutInMicroSeconds: | |
| The timeout, in micro second units, to use for the | |
| execution of this ATAPI command. | |
| A TimeoutInMicroSeconds value of 0 means that | |
| this function will wait indefinitely for the ATAPI | |
| command to execute. | |
| If TimeoutInMicroSeconds is greater than zero, then | |
| this function will return EFI_TIMEOUT if the time | |
| required to execute the ATAPI command is greater | |
| than TimeoutInMicroSeconds. | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| UINT8 | |
| ReadPortB ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN UINT16 Port | |
| ) | |
| /*++ | |
| Routine Description: | |
| Read one byte from a specified I/O port. | |
| Arguments: | |
| PciIo - The pointer of EFI_PCI_IO_PROTOCOL | |
| Port - IO port | |
| Returns: | |
| A byte read out | |
| --*/ | |
| ; | |
| UINT16 | |
| ReadPortW ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN UINT16 Port | |
| ) | |
| /*++ | |
| Routine Description: | |
| Read one word from a specified I/O port. | |
| Arguments: | |
| PciIo - The pointer of EFI_PCI_IO_PROTOCOL | |
| Port - IO port | |
| Returns: | |
| A word read out | |
| --*/ | |
| ; | |
| VOID | |
| WritePortB ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN UINT16 Port, | |
| IN UINT8 Data | |
| ) | |
| /*++ | |
| Routine Description: | |
| Write one byte to a specified I/O port. | |
| Arguments: | |
| PciIo - The pointer of EFI_PCI_IO_PROTOCOL | |
| Port - IO port | |
| Data - The data to write | |
| Returns: | |
| NONE | |
| --*/ | |
| ; | |
| VOID | |
| WritePortW ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN UINT16 Port, | |
| IN UINT16 Data | |
| ) | |
| /*++ | |
| Routine Description: | |
| Write one word to a specified I/O port. | |
| Arguments: | |
| PciIo - The pointer of EFI_PCI_IO_PROTOCOL | |
| Port - IO port | |
| Data - The data to write | |
| Returns: | |
| NONE | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| StatusDRQClear ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeOutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether DRQ is clear in the Status Register. (BSY must also be cleared) | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| DRQ clear. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AltStatusDRQClear ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeOutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether DRQ is clear in the Alternate Status Register. | |
| (BSY must also be cleared).If TimeoutInMicroSeconds is zero, this routine should | |
| wait infinitely for DRQ clear. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| StatusDRQReady ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeOutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether DRQ is ready in the Status Register. (BSY must also be cleared) | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| DRQ ready. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AltStatusDRQReady ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeOutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether DRQ is ready in the Alternate Status Register. | |
| (BSY must also be cleared) | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| DRQ ready. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| StatusWaitForBSYClear ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeoutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether BSY is clear in the Status Register. | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| BSY clear. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AltStatusWaitForBSYClear ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeoutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether BSY is clear in the Alternate Status Register. | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| BSY clear. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| StatusDRDYReady ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeoutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether DRDY is ready in the Status Register. | |
| (BSY must also be cleared) | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| DRDY ready. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AltStatusDRDYReady ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT64 TimeoutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether DRDY is ready in the Alternate Status Register. | |
| (BSY must also be cleared) | |
| If TimeoutInMicroSeconds is zero, this routine should wait infinitely for | |
| DRDY ready. Otherwise, it will return EFI_TIMEOUT when specified time is | |
| elapsed. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| TimeoutInMicroSeconds - The time to wait for | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AtapiPassThruPioReadWriteData ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| UINT16 *Buffer, | |
| UINT32 *ByteCount, | |
| DATA_DIRECTION Direction, | |
| UINT64 TimeOutInMicroSeconds | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs data transfer between ATAPI device and host after the | |
| ATAPI command packet is sent. | |
| Arguments: | |
| AtapiScsiPrivate: Private data structure for the specified channel. | |
| Buffer: Points to the transferred data. | |
| ByteCount: When input,indicates the buffer size; when output, | |
| indicates the actually transferred data size. | |
| Direction: Indicates the data transfer direction. | |
| TimeoutInMicroSeconds: | |
| The timeout, in micro second units, to use for the | |
| execution of this ATAPI command. | |
| A TimeoutInMicroSeconds value of 0 means that | |
| this function will wait indefinitely for the ATAPI | |
| command to execute. | |
| If TimeoutInMicroSeconds is greater than zero, then | |
| this function will return EFI_TIMEOUT if the time | |
| required to execute the ATAPI command is greater | |
| than TimeoutInMicroSeconds. | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| AtapiPassThruCheckErrorStatus ( | |
| ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check Error Register for Error Information. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| EFI_STATUS | |
| GetIdeRegistersBaseAddr ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| OUT IDE_REGISTERS_BASE_ADDR *IdeRegsBaseAddr | |
| ) | |
| /*++ | |
| Routine Description: | |
| Get IDE IO port registers' base addresses by mode. In 'Compatibility' mode, | |
| use fixed addresses. In Native-PCI mode, get base addresses from BARs in | |
| the PCI IDE controller's Configuration Space. | |
| Arguments: | |
| PciIo - Pointer to the EFI_PCI_IO_PROTOCOL instance | |
| IdeRegsBaseAddr - Pointer to IDE_REGISTERS_BASE_ADDR to | |
| receive IDE IO port registers' base addresses | |
| Returns: | |
| EFI_STATUS | |
| --*/ | |
| ; | |
| VOID | |
| InitAtapiIoPortRegisters ( | |
| IN ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate, | |
| IN IDE_REGISTERS_BASE_ADDR *IdeRegsBaseAddr | |
| ) | |
| /*++ | |
| Routine Description: | |
| Initialize each Channel's Base Address of CommandBlock and ControlBlock. | |
| Arguments: | |
| AtapiScsiPrivate - The pointer of ATAPI_SCSI_PASS_THRU_DEV | |
| IdeRegsBaseAddr - The pointer of IDE_REGISTERS_BASE_ADDR | |
| Returns: | |
| None | |
| --*/ | |
| ; | |
| /** | |
| Installs Scsi Pass Thru and/or Ext Scsi Pass Thru | |
| protocols based on feature flags. | |
| @param Controller The controller handle to | |
| install these protocols on. | |
| @param AtapiScsiPrivate A pointer to the protocol private | |
| data structure. | |
| @retval EFI_SUCCESS The installation succeeds. | |
| @retval other The installation fails. | |
| **/ | |
| EFI_STATUS | |
| InstallScsiPassThruProtocols ( | |
| IN EFI_HANDLE *ControllerHandle, | |
| IN ATAPI_SCSI_PASS_THRU_DEV *AtapiScsiPrivate | |
| ); | |
| #endif |