/** @file | |
The Header file of the Pci Host Bridge Driver | |
Copyright (C) 2015, Red Hat, Inc. | |
Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR> | |
This program and the accompanying materials are licensed and made available | |
under the terms and conditions of the BSD License which accompanies this | |
distribution. The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
**/ | |
#ifndef _PCI_HOST_BRIDGE_H_ | |
#define _PCI_HOST_BRIDGE_H_ | |
#include <PiDxe.h> | |
#include <IndustryStandard/Pci.h> | |
#include <IndustryStandard/Acpi.h> | |
#include <Protocol/PciHostBridgeResourceAllocation.h> | |
#include <Protocol/PciRootBridgeIo.h> | |
#include <Protocol/Metronome.h> | |
#include <Protocol/DevicePath.h> | |
#include <Library/BaseLib.h> | |
#include <Library/DebugLib.h> | |
#include <Library/BaseMemoryLib.h> | |
#include <Library/MemoryAllocationLib.h> | |
#include <Library/UefiLib.h> | |
#include <Library/UefiBootServicesTableLib.h> | |
#include <Library/DxeServicesTableLib.h> | |
#include <Library/DevicePathLib.h> | |
#include <Library/IoLib.h> | |
#include <Library/PciLib.h> | |
#define MAX_PCI_DEVICE_NUMBER 31 | |
#define MAX_PCI_FUNCTION_NUMBER 7 | |
#define MAX_PCI_REG_ADDRESS 0xFF | |
typedef enum { | |
IoOperation, | |
MemOperation, | |
PciOperation | |
} OPERATION_TYPE; | |
#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't') | |
typedef struct { | |
UINTN Signature; | |
EFI_HANDLE HostBridgeHandle; | |
UINTN RootBridgeNumber; | |
LIST_ENTRY Head; | |
BOOLEAN ResourceSubmited; | |
BOOLEAN CanRestarted; | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc; | |
} PCI_HOST_BRIDGE_INSTANCE; | |
#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \ | |
CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE) | |
// | |
// HostBridge Resource Allocation interface | |
// | |
/** | |
These are the notifications from the PCI bus driver that it is about to enter | |
a certain phase of the PCI enumeration process. | |
This member function can be used to notify the host bridge driver to perform | |
specific actions, including any chipset-specific initialization, so that the | |
chipset is ready to enter the next phase. Eight notification points are | |
defined at this time. See belows: | |
EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures | |
and internal data structures. The PCI | |
enumerator should issue this | |
notification before starting a fresh | |
enumeration process. Enumeration | |
cannot be restarted after sending any | |
other notification such as | |
EfiPciHostBridgeBeginBusAllocation. | |
EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to | |
begin. No specific action is required | |
here. This notification can be used to | |
perform any chipset-specific | |
programming. | |
EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming | |
phase is complete. No specific action | |
is required here. This notification | |
can be used to perform any | |
chipset-specific programming. | |
EfiPciHostBridgeBeginResourceAllocation | |
The resource allocation phase is about | |
to begin. No specific action is | |
required here. This notification can | |
be used to perform any | |
chipset-specific programming. | |
EfiPciHostBridgeAllocateResources Allocates resources per previously | |
submitted requests for all the PCI | |
root bridges. These resource settings | |
are returned on the next call to | |
GetProposedResources(). Before calling | |
NotifyPhase() with a Phase of | |
EfiPciHostBridgeAllocateResource, the | |
PCI bus enumerator is responsible for | |
gathering I/O and memory requests for | |
all the PCI root bridges and | |
submitting these requests using | |
SubmitResources(). This function pads | |
the resource amount to suit the root | |
bridge hardware, takes care of | |
dependencies between the PCI root | |
bridges, and calls the Global | |
Coherency Domain (GCD) with the | |
allocation request. In the case of | |
padding, the allocated range could be | |
bigger than what was requested. | |
EfiPciHostBridgeSetResources Programs the host bridge hardware to | |
decode previously allocated resources | |
(proposed resources) for all the PCI | |
root bridges. After the hardware is | |
programmed, reassigning resources will | |
not be supported. The bus settings are | |
not affected. | |
EfiPciHostBridgeFreeResources Deallocates resources that were | |
previously allocated for all the PCI | |
root bridges and resets the I/O and | |
memory apertures to their initial | |
state. The bus settings are not | |
affected. If the request to allocate | |
resources fails, the PCI enumerator | |
can use this notification to | |
deallocate previous resources, adjust | |
the requests, and retry allocation. | |
EfiPciHostBridgeEndResourceAllocation The resource allocation phase is | |
completed. No specific action is | |
required here. This notification can | |
be used to perform any chipsetspecific | |
programming. | |
@param[in] This The instance pointer of | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
@param[in] Phase The phase during enumeration | |
@retval EFI_NOT_READY This phase cannot be entered at this time. For | |
example, this error is valid for a Phase of | |
EfiPciHostBridgeAllocateResources if | |
SubmitResources() has not been called for one | |
or more PCI root bridges before this call | |
@retval EFI_DEVICE_ERROR Programming failed due to a hardware error. | |
This error is valid for a Phase of | |
EfiPciHostBridgeSetResources. | |
@retval EFI_INVALID_PARAMETER Invalid phase parameter | |
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a | |
lack of resources. This error is valid for a | |
Phase of EfiPciHostBridgeAllocateResources if | |
the previously submitted resource requests | |
cannot be fulfilled or were only partially | |
fulfilled. | |
@retval EFI_SUCCESS The notification was accepted without any | |
errors. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
NotifyPhase( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase | |
); | |
/** | |
Return the device handle of the next PCI root bridge that is associated with | |
this Host Bridge. | |
This function is called multiple times to retrieve the device handles of all | |
the PCI root bridges that are associated with this PCI host bridge. Each PCI | |
host bridge is associated with one or more PCI root bridges. On each call, | |
the handle that was returned by the previous call is passed into the | |
interface, and on output the interface returns the device handle of the next | |
PCI root bridge. The caller can use the handle to obtain the instance of the | |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more | |
PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI | |
enumerator must enumerate the PCI root bridges in the order that they are | |
returned by this function. | |
For D945 implementation, there is only one root bridge in PCI host bridge. | |
@param[in] This The instance pointer of | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
@param[in, out] RootBridgeHandle Returns the device handle of the next PCI | |
root bridge. | |
@retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then | |
return the first Rootbridge handle of the | |
specific Host bridge and return EFI_SUCCESS. | |
@retval EFI_NOT_FOUND Can not find the any more root bridge in | |
specific host bridge. | |
@retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was | |
returned on a previous call to | |
GetNextRootBridge(). | |
**/ | |
EFI_STATUS | |
EFIAPI | |
GetNextRootBridge( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN OUT EFI_HANDLE *RootBridgeHandle | |
); | |
/** | |
Returns the allocation attributes of a PCI root bridge. | |
The function returns the allocation attributes of a specific PCI root bridge. | |
The attributes can vary from one PCI root bridge to another. These attributes | |
are different from the decode-related attributes that are returned by the | |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The | |
RootBridgeHandle parameter is used to specify the instance of the PCI root | |
bridge. The device handles of all the root bridges that are associated with | |
this host bridge must be obtained by calling GetNextRootBridge(). The | |
attributes are static in the sense that they do not change during or after | |
the enumeration process. The hardware may provide mechanisms to change the | |
attributes on the fly, but such changes must be completed before | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted | |
values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in | |
"Related Definitions" below. The caller uses these attributes to combine | |
multiple resource requests. | |
For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI | |
bus enumerator needs to include requests for the prefetchable memory in the | |
nonprefetchable memory pool and not request any prefetchable memory. | |
Attribute Description | |
------------------------------------ --------------------------------------- | |
EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root | |
bridge does not support separate | |
windows for nonprefetchable and | |
prefetchable memory. A PCI bus driver | |
needs to include requests for | |
prefetchable memory in the | |
nonprefetchable memory pool. | |
EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root | |
bridge supports 64-bit memory windows. | |
If this bit is not set, the PCI bus | |
driver needs to include requests for a | |
64-bit memory address in the | |
corresponding 32-bit memory pool. | |
@param[in] This The instance pointer of | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
@param[in] RootBridgeHandle The device handle of the PCI root bridge in | |
which the caller is interested. Type | |
EFI_HANDLE is defined in | |
InstallProtocolInterface() in the UEFI 2.0 | |
Specification. | |
@param[out] Attributes The pointer to attribte of root bridge, it is | |
output parameter | |
@retval EFI_INVALID_PARAMETER Attribute pointer is NULL | |
@retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. | |
@retval EFI_SUCCESS Success to get attribute of interested root | |
bridge. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
GetAttributes( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_HANDLE RootBridgeHandle, | |
OUT UINT64 *Attributes | |
); | |
/** | |
Sets up the specified PCI root bridge for the bus enumeration process. | |
This member function sets up the root bridge for bus enumeration and returns | |
the PCI bus range over which the search should be performed in ACPI 2.0 | |
resource descriptor format. | |
@param[in] This The | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
instance. | |
@param[in] RootBridgeHandle The PCI Root Bridge to be set up. | |
@param[out] Configuration Pointer to the pointer to the PCI bus resource | |
descriptor. | |
@retval EFI_INVALID_PARAMETER Invalid Root bridge's handle | |
@retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. | |
@retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
StartBusEnumeration( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_HANDLE RootBridgeHandle, | |
OUT VOID **Configuration | |
); | |
/** | |
Programs the PCI root bridge hardware so that it decodes the specified PCI | |
bus range. | |
This member function programs the specified PCI root bridge to decode the bus | |
range that is specified by the input parameter Configuration. | |
The bus range information is specified in terms of the ACPI 2.0 resource | |
descriptor format. | |
@param[in] This The | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
instance | |
@param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be | |
programmed | |
@param[in] Configuration The pointer to the PCI bus resource descriptor | |
@retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge | |
handle. | |
@retval EFI_INVALID_PARAMETER Configuration is NULL. | |
@retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI | |
2.0 resource descriptor. | |
@retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI | |
2.0 bus resource descriptor. | |
@retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource | |
descriptors other than bus descriptors. | |
@retval EFI_INVALID_PARAMETER Configuration contains one or more invalid | |
ACPI resource descriptors. | |
@retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this | |
root bridge. | |
@retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this | |
root bridge. | |
@retval EFI_DEVICE_ERROR Programming failed due to a hardware error. | |
@retval EFI_SUCCESS The bus range for the PCI root bridge was | |
programmed. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SetBusNumbers( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_HANDLE RootBridgeHandle, | |
IN VOID *Configuration | |
); | |
/** | |
Submits the I/O and memory resource requirements for the specified PCI root | |
bridge. | |
This function is used to submit all the I/O and memory resources that are | |
required by the specified PCI root bridge. The input parameter Configuration | |
is used to specify the following: | |
- The various types of resources that are required | |
- The associated lengths in terms of ACPI 2.0 resource descriptor format | |
@param[in] This Pointer to the | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
instance. | |
@param[in] RootBridgeHandle The PCI root bridge whose I/O and memory | |
resource requirements are being submitted. | |
@param[in] Configuration The pointer to the PCI I/O and PCI memory | |
resource descriptor. | |
@retval EFI_SUCCESS The I/O and memory resource requests for a PCI | |
root bridge were accepted. | |
@retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge | |
handle. | |
@retval EFI_INVALID_PARAMETER Configuration is NULL. | |
@retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI | |
2.0 resource descriptor. | |
@retval EFI_INVALID_PARAMETER Configuration includes requests for one or | |
more resource types that are not supported by | |
this PCI root bridge. This error will happen | |
if the caller did not combine resources | |
according to Attributes that were returned by | |
GetAllocAttributes(). | |
@retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. | |
@retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI | |
root bridge. | |
@retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for | |
this PCI root bridge. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SubmitResources( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_HANDLE RootBridgeHandle, | |
IN VOID *Configuration | |
); | |
/** | |
Returns the proposed resource settings for the specified PCI root bridge. | |
This member function returns the proposed resource settings for the | |
specified PCI root bridge. The proposed resource settings are prepared when | |
NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources. | |
The output parameter Configuration specifies the following: | |
- The various types of resources, excluding bus resources, that are | |
allocated | |
- The associated lengths in terms of ACPI 2.0 resource descriptor format | |
@param[in] This Pointer to the | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
instance. | |
@param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is | |
defined in InstallProtocolInterface() in the | |
UEFI 2.0 Specification. | |
@param[out] Configuration The pointer to the pointer to the PCI I/O and | |
memory resource descriptor. | |
@retval EFI_SUCCESS The requested parameters were returned. | |
@retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge | |
handle. | |
@retval EFI_DEVICE_ERROR Programming failed due to a hardware error. | |
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a | |
lack of resources. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
GetProposedResources( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_HANDLE RootBridgeHandle, | |
OUT VOID **Configuration | |
); | |
/** | |
Provides the hooks from the PCI bus driver to every PCI controller | |
(device/function) at various stages of the PCI enumeration process that allow | |
the host bridge driver to preinitialize individual PCI controllers before | |
enumeration. | |
This function is called during the PCI enumeration process. No specific | |
action is expected from this member function. It allows the host bridge | |
driver to preinitialize individual PCI controllers before enumeration. | |
@param This Pointer to the | |
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL | |
instance. | |
@param RootBridgeHandle The associated PCI root bridge handle. Type | |
EFI_HANDLE is defined in InstallProtocolInterface() | |
in the UEFI 2.0 Specification. | |
@param PciAddress The address of the PCI device on the PCI bus. This | |
address can be passed to the | |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to | |
access the PCI configuration space of the device. | |
See Table 12-1 in the UEFI 2.0 Specification for the | |
definition of | |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. | |
@param Phase The phase of the PCI device enumeration. | |
@retval EFI_SUCCESS The requested parameters were returned. | |
@retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge | |
handle. | |
@retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined | |
in | |
EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. | |
@retval EFI_DEVICE_ERROR Programming failed due to a hardware error. | |
The PCI enumerator should not enumerate this | |
device, including its child devices if it is | |
a PCI-to-PCI bridge. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
PreprocessController ( | |
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, | |
IN EFI_HANDLE RootBridgeHandle, | |
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, | |
IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase | |
); | |
// | |
// Define resource status constant | |
// | |
#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL | |
#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL | |
// | |
// Driver Instance Data Prototypes | |
// | |
typedef struct { | |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation; | |
UINTN NumberOfBytes; | |
UINTN NumberOfPages; | |
EFI_PHYSICAL_ADDRESS HostAddress; | |
EFI_PHYSICAL_ADDRESS MappedHostAddress; | |
} MAP_INFO; | |
typedef struct { | |
ACPI_HID_DEVICE_PATH AcpiDevicePath; | |
EFI_DEVICE_PATH_PROTOCOL EndDevicePath; | |
} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH; | |
typedef struct { | |
UINT64 BusBase; | |
UINT64 BusLimit; | |
UINT64 MemBase; | |
UINT64 MemLimit; | |
UINT64 IoBase; | |
UINT64 IoLimit; | |
} PCI_ROOT_BRIDGE_RESOURCE_APERTURE; | |
typedef enum { | |
TypeIo = 0, | |
TypeMem32, | |
TypePMem32, | |
TypeMem64, | |
TypePMem64, | |
TypeBus, | |
TypeMax | |
} PCI_RESOURCE_TYPE; | |
typedef enum { | |
ResNone = 0, | |
ResSubmitted, | |
ResRequested, | |
ResAllocated, | |
ResStatusMax | |
} RES_STATUS; | |
typedef struct { | |
PCI_RESOURCE_TYPE Type; | |
UINT64 Base; | |
UINT64 Length; | |
UINT64 Alignment; | |
RES_STATUS Status; | |
} PCI_RES_NODE; | |
#pragma pack(1) | |
typedef struct { | |
EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesc[TypeMax]; | |
EFI_ACPI_END_TAG_DESCRIPTOR EndDesc; | |
} RESOURCE_CONFIGURATION; | |
#pragma pack() | |
#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b') | |
typedef struct { | |
UINT32 Signature; | |
LIST_ENTRY Link; | |
EFI_HANDLE Handle; | |
UINT64 RootBridgeAttrib; | |
UINT64 Attributes; | |
UINT64 Supports; | |
// | |
// Specific for this memory controller: Bus, I/O, Mem | |
// | |
PCI_RES_NODE ResAllocNode[6]; | |
// | |
// Addressing for Memory and I/O and Bus arrange | |
// | |
UINT64 BusBase; | |
UINT64 MemBase; | |
UINT64 IoBase; | |
UINT64 BusLimit; | |
UINT64 MemLimit; | |
UINT64 IoLimit; | |
EFI_PCI_ROOT_BRIDGE_DEVICE_PATH DevicePath; | |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io; | |
RESOURCE_CONFIGURATION ConfigBuffer; | |
} PCI_ROOT_BRIDGE_INSTANCE; | |
// | |
// Driver Instance Data Macros | |
// | |
#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \ | |
CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE) | |
#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \ | |
CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE) | |
/** | |
Construct the Pci Root Bridge Io protocol | |
@param Protocol Point to protocol instance | |
@param HostBridgeHandle Handle of host bridge | |
@param Attri Attribute of host bridge | |
@param ResAperture ResourceAperture for host bridge | |
@retval EFI_SUCCESS Success to initialize the Pci Root Bridge. | |
**/ | |
EFI_STATUS | |
RootBridgeConstructor ( | |
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, | |
IN EFI_HANDLE HostBridgeHandle, | |
IN UINT64 Attri, | |
IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture | |
); | |
#endif |