ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-AEMv8Ax4-foundation.fdf

#
#  Copyright (c) 2011 - 2015, ARM Limited. All rights reserved.
#
#  This program and the accompanying materials
#  are licensed and made available under the terms and conditions of the BSD License
#  which accompanies this distribution.  The full text of the license may be found at
#  http://opensource.org/licenses/bsd-license.php
#
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################

[FD.RTSM_VE_Foundationv8_EFI]
BaseAddress   = 0xA0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in RAM (Foundation model has no NOR Flash).
Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
ErasePolarity = 1

# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize     = 0x00001000
NumBlocks     = 0x300

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC

0x00080000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT


################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.FVMAIN_SEC]
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/Sec/Sec.inf


[FV.FvMain]
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 16        # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 6685e0b5-d6bb-4c12-97ef-58bd87112dee

  APRIORI DXE {
    INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  }

  INF MdeModulePkg/Core/Dxe/DxeMain.inf
  INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

  #
  # PI DXE Drivers producing Architectural Protocols (EFI Services)
  #
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf

  #
  # Multiple Console IO support
  #
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf

  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf

  #
  # Semi-hosting filesystem
  #
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf

  #
  # FAT filesystem + GPT/MBR partitioning
  #
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
  INF FatBinPkg/EnhancedFatDxe/Fat.inf
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

  #
  # Platform Driver
  #
  INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
  INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf

  #
  # UEFI application (Shell Embedded Boot Loader)
  #
  INF ShellBinPkg/UefiShell/UefiShell.inf

  #
  # Bds
  #
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
  INF ArmPlatformPkg/Bds/Bds.inf

  #
  # FDT installation
  #
  # The UEFI driver is at the end of the list of the driver to be dispatched
  # after the device drivers (eg: Ethernet) to ensure we have support for them.
  INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf

  # FV Filesystem
  INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf

  # Legacy Linux Loader
  INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf

[FV.FVMAIN_COMPACT]
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

!if $(EDK2_SKIP_PEICORE) == 1
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf
!else
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
  INF MdeModulePkg/Core/Pei/PeiMain.inf
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif

  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }


################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################


############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
#  FILE DRIVER = $(NAMED_GUID) {
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
#    COMPRESS PI_STD {
#      GUIDED {
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
#        UI       STRING="$(MODULE_NAME)" Optional
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
#      }
#    }
#  }
#
############################################################################

[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    TE  TE Align = 4K                  $(INF_OUTPUT)/$(MODULE_NAME).efi
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI     STRING ="$(MODULE_NAME)" Optional
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
     TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI       STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.PEIM.TIANOCOMPRESSED]
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
      UI        STRING="$(MODULE_NAME)" Optional
    }
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI       STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    UI     STRING ="$(MODULE_NAME)"     Optional
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
  }

[Rule.Common.UEFI_DRIVER.BINARY]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional      |.depex
    PE32      PE32                    |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION.BINARY]
  FILE APPLICATION = $(NAMED_GUID) {
    PE32      PE32                    |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }