tools/art - SHIFTPHONES/android_art - Gitiles

 # Copyright (C) 2011 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # This script is used on host and device. It uses a common subset
 # shell dialect that should work on the host (e.g. bash), and
 # Android (e.g. mksh).

 ######################################
 # Functions
 ######################################
 function find_libdir() {
   # Get the actual file, $1 is the ART_BINARY_PATH and may be a symbolic link.
   # Use realpath instead of readlink because Android does not have a readlink.
   if [[ "$(realpath "$1")" == *dalvikvm64 ]]; then
     echo "lib64"
   else
     echo "lib"
   fi
 }

 function usage() {
   cat 1>&2 <<EOF
 Usage: art [OPTIONS] [--] [ART_OPTIONS] CLASS

 Supported OPTIONS include:
   --32                     Use the 32-bit Android Runtime.
   --64                     Use the 64-bit Android Runtime.
   -d                       Use the debug ART library (libartd.so).
   --debug                  Equivalent to -d.
   --gdb                    Launch the Android Runtime in gdb.
   --gdbserver <comms>      Launch the Android Runtime in gdbserver using the
                            supplied communication channel.
   --help                   Display usage message.
   --invoke-with <program>  Launch the Android Runtime in <program>.
   --perf                   Launch the Android Runtime with perf recording.
   --perf-report            Launch the Android Runtime with perf recording with
                            report upon completion.
   --profile                Run with profiling, then run using profile data.
   --verbose                Run script verbosely.
   --no-clean               Don't cleanup oat directories.
   --no-compile             Don't invoke dex2oat before running.
   --allow-default-jdwp     Don't automatically put in -XjdwpProvider:none.
                            You probably do not want this.

 The ART_OPTIONS are passed directly to the Android Runtime.

 Example:
   art --32 -cp my_classes.dex MainClass

 Common errors:
   1) Not having core.art available (see $ANDROID_BUILD_TOP/art/Android.mk).
      eg m -j32 build-art-host
   2) Not having boot.art available (see $ANDROID_BUILD_TOP/build/make/core/dex_preopt_libart_boot.mk)
      eg m -j32 out/target/product/generic_x86_64/dex_bootjars/system/framework/x86_64/boot.art
 EOF
 }

 function clean_android_data() {
   if [ "$DELETE_ANDROID_DATA" = "yes" ]; then
     rm -rf $ANDROID_DATA
   fi
 }

 # Given 'VAR1=VAL VAR2=VAL2 ... cmd arg1 arg2 ... argN' run the 'cmd' with the args
 # with the modified environment {VAR1=VAL,VAL2=,...}.
 #
 # Also prints the command to be run if verbose mode is enabled.
 function verbose_run() {
   if [ "$VERBOSE" = "yes" ]; then
     echo "$@"
   fi

   env "$@"
 }

 # Parse a colon-separated list into an array (e.g. "foo.dex:bar.dex" -> (foo.dex bar.dex))
 PARSE_CLASSPATH_RESULT=()  # Return value will be here due to shell limitations.
 parse_classpath() {
   local cp="$1"
   local oldifs=$IFS

   local cp_array
   cp_array=()

   IFS=":"
   for part in $cp; do
     cp_array+=("$part")
   done
   IFS=$oldifs

   PARSE_CLASSPATH_RESULT=("${cp_array[@]}")
 }

 # Sets 'PARSE_CLASSPATH_RESULT' to an array of class path dex files.
 # e.g. (-cp foo/classes.dex:bar/classes.dex) -> (foo/classes.dex bar/classes.dex)
 find_cp_in_args() {
   local found="false"
   local index=0
   local what

   while [[ $# -gt 0 ]]; do
     case "$1" in
       -cp|-classpath)
         parse_classpath "$2"
         # Sets 'PARSE_CLASSPATH_RESULT' to an array of class path dex files.
         # Subsequent parses will overwrite the preceding.
         shift
         ;;
     esac
     shift
   done
 }

 # Delete the 'oat' directories relative to the classpath's dex files.
 # e.g. (foo/classes.dex bar/classes.dex) would delete (foo/oat bar/oat) directories.
 cleanup_oat_directory() {
   local classpath
   classpath=("$@")

   local dirpath

   for path in "${classpath[@]}"; do
     dirpath="$(dirname "$path")"
     [[ -d "$dirpath" ]] && verbose_run rm -rf "$dirpath/oat"
   done
 }

 # Parse -cp <CP>, -classpath <CP>, and $CLASSPATH to find the dex files.
 # Each dex file's directory will have an 'oat' file directory, delete it.
 # Input: Command line arguments to the art script.
 # e.g. -cp foo/classes.dex:bar/classes.dex would delete (foo/oat bar/oat) directories.
 cleanup_oat_directory_for_classpath() {
   if [ "$CLEAN_OAT_FILES" = "yes" ]; then
     # First try: Use $CLASSPATH environment variable.
     parse_classpath "$CLASSPATH"
     # Second try: Look for latest -cp or -classpath arg which will take precedence.
     find_cp_in_args "$@"

     cleanup_oat_directory "${PARSE_CLASSPATH_RESULT[@]}"
   fi
 }

 # Attempt to find $ANDROID_ROOT/framework/<isa>/core.art' without knowing what <isa> is.
 function check_if_boot_image_file_exists() {
   local image_location_dir="$1"
   local image_location_name="$2"

   # Expand image_files to a list of existing image files on the disk.
   # If no such files exist, it expands to single element 'dir/*/file' with a literal '*'.
   local image_files
   image_files=("$image_location_dir"/*/"$image_location_name") # avoid treating "*" as literal.

   # Array always has at least 1 element. Test explicitly whether the file exists.
   [[ -e "${image_files[0]}" ]]
 }

 # Automatically find the boot image location. It uses core.art by default.
 # On a real device, it might only have a boot.art, so use that instead when core.art does not exist.
 function detect_boot_image_location() {
   local image_location_dir="$ANDROID_ROOT/framework"
   local image_location_name="core.art"

   # If there are no existing core.art, try to find boot.art.
   # If there is no boot.art then leave it as-is, assumes -Ximage is explicitly used.
   # Otherwise let dalvikvm give the error message about an invalid image file.
   if ! check_if_boot_image_file_exists "$image_location_dir" "core.art" && \
        check_if_boot_image_file_exists "$image_location_dir" "boot.art"; then
     image_location_name="boot.art"
   fi

   local image_location="$image_location_dir/$image_location_name"
   echo "$image_location"
 }

 function run_dex2oat() {
   local class_loader_context=
   for dex_file in "${DEX2OAT_CLASSPATH[@]}"
   do
     while [ -h "$dex_file" ]; do
       # On Mac OS, readlink -f doesn't work.
       dex_file="$(readlink "$dex_file")"
     done
     # Create oat file directory.
     verbose_run mkdir -p $(dirname "$dex_file")/oat/$ISA
     local oat_file=$(basename "$dex_file")
     local oat_file=$(dirname "$dex_file")/oat/$ISA/${oat_file%.*}.odex
     # When running dex2oat use the exact same context as when running dalvikvm.
     # (see run_art function)
     verbose_run ANDROID_DATA=$ANDROID_DATA                    \
           ANDROID_ROOT=$ANDROID_ROOT                          \
           ANDROID_I18N_ROOT=$ANDROID_I18N_ROOT                \
           ANDROID_ART_ROOT=$ANDROID_ART_ROOT                  \
           ANDROID_TZDATA_ROOT=$ANDROID_TZDATA_ROOT            \
           LD_LIBRARY_PATH=$LD_LIBRARY_PATH                    \
           PATH=$ANDROID_ROOT/bin:$PATH                        \
           LD_USE_LOAD_BIAS=1                                  \
           ANDROID_LOG_TAGS=$ANDROID_LOG_TAGS                  \
           $DEX2OAT_BINARY_PATH                                \
           --runtime-arg -Xnorelocate                          \
           --boot-image=$DEX2OAT_BOOT_IMAGE                    \
           --instruction-set=$ISA                              \
           --class-loader-context="PCL[$class_loader_context]" \
           "${DEX2OAT_FLAGS[@]}"                               \
           --dex-file=$dex_file                                \
           --oat-file=$oat_file
     if [[ -n $class_loader_context ]]; then
       class_loader_context+=":"
     fi
     class_loader_context+="$dex_file"
   done
 }

 # Extract the dex2oat flags from the list of arguments.
 # -Xcompiler-options arguments are stored in DEX2OAT_FLAGS array
 # -cp argument is split by ':' and stored in DEX2OAT_CLASSPATH
 # -Ximage argument is stored in DEX2OAT_BOOT_IMAGE
 # -Xbootclasspath argument is stored in DEX2OAT_BCP
 # -Xbootclasspath-locations argument is stored in DEX2OAT_BCP_LOCS
 function extract_dex2oat_flags() {
   while [ $# -gt 0 ]; do
     case $1 in
       -Xcompiler-option)
         DEX2OAT_FLAGS+=("$2")
         shift
         ;;
       -Ximage:*)
         DEX2OAT_BOOT_IMAGE=$1
         # Remove '-Ximage:' from the argument.
         DEX2OAT_BOOT_IMAGE=${DEX2OAT_BOOT_IMAGE##-Ximage:}
         ;;
       -Xbootclasspath:*)
         DEX2OAT_BCP=$1
         # Remove '-Xbootclasspath:' from the argument.
         DEX2OAT_BCP=${DEX2OAT_BCP##-Xbootclasspath:}
         ;;
       -Xbootclasspath-locations:*)
         DEX2OAT_BCP_LOCS=$1
         # Remove '-Xbootclasspath-locations:' from the argument.
         DEX2OAT_BCP_LOCS=${DEX2OAT_BCP_LOCS##-Xbootclasspath-locations:}
         ;;
       -cp)
         # Reset any previously parsed classpath, just like dalvikvm
         # only supports one -cp argument.
         DEX2OAT_CLASSPATH=()
         # TODO: support -classpath and CLASSPATH
         local oifs=$IFS
         IFS=':'
         for classpath_elem in $2
         do
           DEX2OAT_CLASSPATH+=("$classpath_elem")
         done
         shift
         IFS=$oifs
         ;;
     esac
     shift
   done
 }

 # Runs dalvikvm, returns its exit code.
 # (Oat directories are cleaned up in between runs)
 function run_art() {
   local ret

   # Run dalvikvm.
   verbose_run ANDROID_DATA="$ANDROID_DATA"                  \
               ANDROID_ROOT="$ANDROID_ROOT"                  \
               ANDROID_I18N_ROOT="$ANDROID_I18N_ROOT"        \
               ANDROID_ART_ROOT="$ANDROID_ART_ROOT"          \
               ANDROID_TZDATA_ROOT="$ANDROID_TZDATA_ROOT"    \
               LD_LIBRARY_PATH="$LD_LIBRARY_PATH"            \
               PATH="$ANDROID_ROOT/bin:$PATH"                \
               LD_USE_LOAD_BIAS=1                            \
               ANDROID_LOG_TAGS="$ANDROID_LOG_TAGS"          \
               $LAUNCH_WRAPPER $ART_BINARY_PATH $lib         \
               -XXlib:"$LIBART"                              \
               -Xnorelocate                                  \
               -Ximage:"$DEFAULT_IMAGE_LOCATION"             \
               "$@"
   ret=$?

   # Avoid polluting disk with 'oat' files after dalvikvm has finished.
   cleanup_oat_directory_for_classpath "$@"

   # Forward exit code of dalvikvm.
   return $ret
 }

 ######################################
 # Globals
 ######################################
 ART_BINARY=dalvikvm
 DEX2OAT_BINARY=dex2oat
 DEX2OAT_SUFFIX=""
 DELETE_ANDROID_DATA="no"
 LAUNCH_WRAPPER=
 LIBART=libart.so
 JIT_PROFILE="no"
 ALLOW_DEFAULT_JDWP="no"
 VERBOSE="no"
 CLEAN_OAT_FILES="yes"
 RUN_DEX2OAT="yes"
 EXTRA_OPTIONS=()
 DEX2OAT_FLAGS=()
 DEX2OAT_CLASSPATH=()

 # Parse arguments
 while [[ "$1" = "-"* ]]; do
   case "$1" in
   --)
     # No more arguments for this script.
     shift
     break
     ;;
   --32)
     ART_BINARY=dalvikvm32
     DEX2OAT_SUFFIX=32
     ;;
   --64)
     ART_BINARY=dalvikvm64
     DEX2OAT_SUFFIX=64
     ;;
   -d)
     ;& # Fallthrough
   --debug)
     LIBART="libartd.so"
     DEX2OAT_BINARY="dex2oatd"
     # Expect that debug mode wants all checks.
     EXTRA_OPTIONS+=(-XX:SlowDebug=true)
     ;;
   --gdbserver)
     LAUNCH_WRAPPER="gdbserver $2"
     shift
     ;;
   --gdb)
     LIBART="libartd.so"
     LAUNCH_WRAPPER="gdb --args"
     ;;
   --help)
     usage
     exit 0
     ;;
   --invoke-with)
     LAUNCH_WRAPPER=$2
     shift
     ;;
   --perf)
     PERF="record"
     ;;
   --perf-report)
     PERF="report"
     ;;
   --profile)
     JIT_PROFILE="yes"
     ;;
   --verbose)
     VERBOSE="yes"
     ;;
   --no-clean)
     CLEAN_OAT_FILES="no"
     ;;
   --no-compile)
     CLEAN_OAT_FILES="no"
     RUN_DEX2OAT="no"
     ;;
   --allow-default-jdwp)
     ALLOW_DEFAULT_JDWP="yes"
     ;;
   --*)
     echo "unknown option: $1" 1>&2
     usage
     exit 1
     ;;
   *)
     break
     ;;
   esac
   shift
 done

 if [ $# -eq 0 ]; then
   usage
   exit 1
 fi

 # Follow all sym links to get the program name.
 if [[ -n "$BASH_SOURCE" ]]; then
   PROG_NAME="$BASH_SOURCE"
 else
   PROG_NAME="$0"
 fi
 while [ -h "$PROG_NAME" ]; do
   # On Mac OS, readlink -f doesn't work.
   PROG_NAME="$(readlink "$PROG_NAME")"
 done

 PROG_DIR="$(cd "${PROG_NAME%/*}" ; pwd -P)"
 ANDROID_ROOT="$(cd $PROG_DIR/..; pwd -P)"

 # If ANDROID_I18N_ROOT is not set, try to detect whether we are running on
 # target or host and set that environment variable to the usual default value.
 if [ -z "$ANDROID_I18N_ROOT" ]; then
   # This script is used on host and target (device). However, the (expected)
   # default value `ANDROID_I18N_ROOT` is not the same on host and target:
   # - on host, `ANDROID_I18N_ROOT` is expected to be
   #   "$ANDROID_ROOT/com.android.i18n";
   # - on target, `ANDROID_I18N_ROOT` is expected to be
   #   "/apex/com.android.i18n".
   #
   # We use the presence/absence of the `$ANDROID_ROOT/../apex` directory to
   # determine whether we are on target or host (this is brittle, but simple).
   if [ -d "$ANDROID_ROOT/../apex" ]; then
     # Target case.
     ANDROID_I18N_ROOT="/apex/com.android.i18n"
   else
     # Host case.
     ANDROID_I18N_ROOT="$ANDROID_ROOT/com.android.i18n"
   fi
 fi

 # If ANDROID_ART_ROOT is not set, try to detect whether we are running on
 # target or host and set that environment variable to the usual default value.
 if [ -z "$ANDROID_ART_ROOT" ]; then
   # This script is used on host and target (device). However, the (expected)
   # default value `ANDROID_ART_ROOT` is not the same on host and target:
   # - on host, `ANDROID_ART_ROOT` is expected to be
   #   "$ANDROID_ROOT/com.android.art";
   # - on target, `ANDROID_ART_ROOT` is expected to be
   #   "/apex/com.android.art".
   #
   # We use the presence/absence of the `$ANDROID_ROOT/../apex` directory to
   # determine whether we are on target or host (this is brittle, but simple).
   if [ -d "$ANDROID_ROOT/../apex" ]; then
     # Target case.
     ANDROID_ART_ROOT="/apex/com.android.art"
   else
     # Host case.
     ANDROID_ART_ROOT="$ANDROID_ROOT/com.android.art"
   fi
 fi

 # If ANDROID_TZDATA_ROOT is not set, try to detect whether we are running on
 # target or host and set that environment variable to the usual default value.
 if [ -z "$ANDROID_TZDATA_ROOT" ]; then
   # This script is used on host and target (device). However, the (expected)
   # default value `ANDROID_TZDATA_ROOT` is not the same on host and target:
   # - on host, `ANDROID_TZDATA_ROOT` is expected to be
   #   "$ANDROID_ROOT/com.android.tzdata";
   # - on target, `ANDROID_TZDATA_ROOT` is expected to be
   #   "/apex/com.android.tzdata".
   #
   # We use the presence/absence of the `$ANDROID_ROOT/../apex` directory to
   # determine whether we are on target or host (this is brittle, but simple).
   if [ -d "$ANDROID_ROOT/../apex" ]; then
     # Target case.
     ANDROID_TZDATA_ROOT="/apex/com.android.tzdata"
   else
     # Host case.
     ANDROID_TZDATA_ROOT="$ANDROID_ROOT/com.android.tzdata"
   fi
 fi

 ART_BINARY_PATH=$ANDROID_ROOT/bin/$ART_BINARY

 if [ ! -x "$ART_BINARY_PATH" ]; then
   cat 1>&2 <<EOF
 Android Runtime not found: $ART_BINARY_PATH
 This script should be in the same directory as the Android Runtime ($ART_BINARY).
 EOF
   exit 1
 fi

 DEX2OAT_BINARY_PATH=$ANDROID_ROOT/bin/$DEX2OAT_BINARY$DEX2OAT_SUFFIX

 if [ ! -x "$DEX2OAT_BINARY_PATH" ]; then
   echo "Warning: Android Compiler not found: $DEX2OAT_BINARY_PATH"
 fi

 ######################################
 # Main program
 ######################################

 # If android logging is not explicitly set, only print warnings and errors.
 if [ -z "$ANDROID_LOG_TAGS" ]; then
   ANDROID_LOG_TAGS='*:w'
 fi

 LIBDIR="$(find_libdir $ART_BINARY_PATH)"
 LD_LIBRARY_PATH=$ANDROID_ROOT/$LIBDIR
 DEFAULT_IMAGE_LOCATION="$(detect_boot_image_location)"
 DEX2OAT_BOOT_IMAGE="$DEFAULT_IMAGE_LOCATION"
 ISA=$(LD_LIBRARY_PATH=$LD_LIBRARY_PATH $ART_BINARY_PATH -showversion | (read art version number isa && echo $isa))

 # Extract the dex2oat flags from the list of arguments.
 # -Xcompiler-options arguments are stored in DEX2OAT_FLAGS array
 # -cp argument is split by ':' and stored in DEX2OAT_CLASSPATH
 # -Ximage argument is stored in DEX2OAT_BOOT_IMAGE
 extract_dex2oat_flags "$@"

 # If ANDROID_DATA is the system ANDROID_DATA or is not set, use our own,
 # and ensure we delete it at the end.
 if [ "$ANDROID_DATA" = "/data" ] || [ "$ANDROID_DATA" = "" ]; then
   if [[ $PWD != / ]]; then
     ANDROID_DATA="$PWD/android-data$$"
   else
     # Use /data/local/tmp when running this from adb shell, since it starts out in /
     # by default.
     ANDROID_DATA="$ANDROID_DATA/local/tmp/android-data$$"
   fi
   mkdir -p "$ANDROID_DATA"
   DELETE_ANDROID_DATA="yes"
 fi

 if [[ "$DEX2OAT_BCP" = "" && "$DEX2OAT_BCP_LOCS" != "" ]]; then
   echo "Cannot use -Xbootclasspath-locations without -Xbootclasspath"
   exit 1
 fi

 if [[ "$DEX2OAT_BOOT_IMAGE" = *core*.art && "$DEX2OAT_BCP" = "" ]]; then
   # Note: This must start with the CORE_IMG_JARS in Android.common_path.mk
   # because that's what we use for compiling the core.art image.
   # It may contain additional modules from TEST_CORE_JARS.
   core_jars_list="core-oj core-libart core-icu4j okhttp bouncycastle apache-xml"
   core_jars_suffix=
   if [[ -e $ANDROID_ROOT/framework/core-oj-hostdex.jar ]]; then
     core_jars_suffix=-hostdex
     core_filenames_dir=$ANDROID_ROOT/framework
     core_locations_dir=$ANDROID_ROOT/framework
     prefix=$PWD/
     if [[ ${core_locations_dir:0:${#prefix}} = $prefix ]]; then
       core_locations_dir="${core_locations_dir##$prefix}"
     fi
   elif [[ -e $ANDROID_ROOT/apex/com.android.art/javalib/core-oj.jar ]]; then
     core_jars_suffix=
     core_filenames_dir=$ANDROID_ROOT/apex/com.android.art/javalib
     core_locations_dir=/apex/com.android.art/javalib
   else
     echo "Can not find jar files for boot image $DEX2OAT_BOOT_IMAGE"
     exit 1
   fi
   if [[ $core_locations_dir != "" ]]; then
     boot_separator=""
     for boot_module in ${core_jars_list}; do
       DEX_FILENAME="$boot_module$core_jars_suffix.jar"
       DEX2OAT_BCP+="$boot_separator$core_filenames_dir/${DEX_FILENAME}"
       DEX2OAT_BCP_LOCS+="$boot_separator$core_locations_dir/${DEX_FILENAME}"
       boot_separator=":"
     done
     if [ "$VERBOSE" = "yes" ]; then
       echo "Using predefined -Xbootclasspath for image $DEX2OAT_BOOT_IMAGE:"
       echo DEX2OAT_BOOT_IMAGE=$DEX2OAT_BOOT_IMAGE
       echo DEX2OAT_BCP=$DEX2OAT_BCP
       echo DEX2OAT_BCP_LOCS=$DEX2OAT_BCP_LOCS
     fi
   fi
 fi

 if [ "$DEX2OAT_BCP" != "" ]; then
   EXTRA_OPTIONS+=("-Xbootclasspath:$DEX2OAT_BCP")
   DEX2OAT_FLAGS+=("--runtime-arg" "-Xbootclasspath:$DEX2OAT_BCP")
   if [ "$DEX2OAT_BCP_LOCS" != "" ]; then
     EXTRA_OPTIONS+=("-Xbootclasspath-locations:$DEX2OAT_BCP_LOCS")
     DEX2OAT_FLAGS+=("--runtime-arg" \
                     "-Xbootclasspath-locations:$DEX2OAT_BCP_LOCS")
   fi
 fi

 if [ "$PERF" != "" ]; then
   LAUNCH_WRAPPER="perf record -g --call-graph dwarf -F 10000 -o $ANDROID_DATA/perf.data -e cycles:u $LAUNCH_WRAPPER"
   DEX2OAT_FLAGS+=(--generate-debug-info)
 fi

 if [ "$ALLOW_DEFAULT_JDWP" = "no" ]; then
   EXTRA_OPTIONS+=(-XjdwpProvider:none)
 fi

 # First cleanup any left-over 'oat' files from the last time dalvikvm was run.
 cleanup_oat_directory_for_classpath "$@"

 # Protect additional arguments in quotes to preserve whitespaces (used by
 # run-jdwp-test.sh when running on device), '$' (may be used as part of
 # classpath) and other special characters when evaluated.
 EXTRA_OPTIONS+=("$@")

 if [ "$JIT_PROFILE" = "yes" ]; then
   # Create the profile. The runtime expects profiles to be created before
   # execution.
   PROFILE_PATH="$ANDROID_DATA/primary.prof"
   touch "$PROFILE_PATH"

   run_art -Xjitsaveprofilinginfo               \
           -Xps-min-methods-to-save:1           \
           -Xps-min-classes-to-save:1           \
           -Xps-min-notification-before-wake:10 \
           -Xps-profile-path:$PROFILE_PATH      \
           -Xusejit:true                        \
           ${EXTRA_OPTIONS[@]}                  \
           &> "$ANDROID_DATA/profile_gen.log"
   EXIT_STATUS=$?

   if [ $EXIT_STATUS != 0 ]; then
     echo "Profile run failed: " >&2
     cat "$ANDROID_DATA/profile_gen.log" >&2
     clean_android_data
     exit $EXIT_STATUS
   fi

   # Wipe dalvik-cache so that a subsequent run_art must regenerate it.
   # Leave $ANDROID_DATA intact since it contains our profile file.
   rm -rf "$ANDROID_DATA/dalvik-cache"

   # Append arguments so next invocation of run_art uses the profile.
   DEX2OAT_FLAGS+=(--profile-file="$PROFILE_PATH")
 fi

 if [ -x "$DEX2OAT_BINARY_PATH" ]; then
   if [ "$RUN_DEX2OAT" = "yes" ]; then
     # Run dex2oat before launching ART to generate the oat files for the classpath.
     run_dex2oat
   fi
 fi

 # Do not continue if the dex2oat failed.
 EXIT_STATUS=$?
 if [ $EXIT_STATUS != 0 ]; then
   echo "Failed dex2oat invocation" >&2
   exit $EXIT_STATUS
 fi

 run_art "${EXTRA_OPTIONS[@]}"
 EXIT_STATUS=$?

 if [ "$PERF" != "" ]; then
   if [ "$PERF" = report ]; then
     perf report -i $ANDROID_DATA/perf.data
   fi
   echo "Perf data saved in: $ANDROID_DATA/perf.data"
 else
   # Perf output is placed under $ANDROID_DATA so not cleaned when perf options used.
   clean_android_data
 fi

 exit $EXIT_STATUS
	# Copyright (C) 2011 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# This script is used on host and device. It uses a common subset
	# shell dialect that should work on the host (e.g. bash), and
	# Android (e.g. mksh).

	######################################
	# Functions
	######################################
	function find_libdir() {
	# Get the actual file, $1 is the ART_BINARY_PATH and may be a symbolic link.
	# Use realpath instead of readlink because Android does not have a readlink.
	if [[ "$(realpath "$1")" == *dalvikvm64 ]]; then
	echo "lib64"
	else
	echo "lib"
	fi
	}

	function usage() {
	cat 1>&2 <<EOF
	Usage: art [OPTIONS] [--] [ART_OPTIONS] CLASS

	Supported OPTIONS include:
	--32 Use the 32-bit Android Runtime.
	--64 Use the 64-bit Android Runtime.
	-d Use the debug ART library (libartd.so).
	--debug Equivalent to -d.
	--gdb Launch the Android Runtime in gdb.
	--gdbserver <comms> Launch the Android Runtime in gdbserver using the
	supplied communication channel.
	--help Display usage message.
	--invoke-with <program> Launch the Android Runtime in <program>.
	--perf Launch the Android Runtime with perf recording.
	--perf-report Launch the Android Runtime with perf recording with
	report upon completion.
	--profile Run with profiling, then run using profile data.
	--verbose Run script verbosely.
	--no-clean Don't cleanup oat directories.
	--no-compile Don't invoke dex2oat before running.
	--allow-default-jdwp Don't automatically put in -XjdwpProvider:none.
	You probably do not want this.

	The ART_OPTIONS are passed directly to the Android Runtime.

	Example:
	art --32 -cp my_classes.dex MainClass

	Common errors:
	1) Not having core.art available (see $ANDROID_BUILD_TOP/art/Android.mk).
	eg m -j32 build-art-host
	2) Not having boot.art available (see $ANDROID_BUILD_TOP/build/make/core/dex_preopt_libart_boot.mk)
	eg m -j32 out/target/product/generic_x86_64/dex_bootjars/system/framework/x86_64/boot.art
	EOF
	}

	function clean_android_data() {
	if [ "$DELETE_ANDROID_DATA" = "yes" ]; then
	rm -rf $ANDROID_DATA
	fi
	}

	# Given 'VAR1=VAL VAR2=VAL2 ... cmd arg1 arg2 ... argN' run the 'cmd' with the args
	# with the modified environment {VAR1=VAL,VAL2=,...}.
	#
	# Also prints the command to be run if verbose mode is enabled.
	function verbose_run() {
	if [ "$VERBOSE" = "yes" ]; then
	echo "$@"
	fi

	env "$@"
	}

	# Parse a colon-separated list into an array (e.g. "foo.dex:bar.dex" -> (foo.dex bar.dex))
	PARSE_CLASSPATH_RESULT=() # Return value will be here due to shell limitations.
	parse_classpath() {
	local cp="$1"
	local oldifs=$IFS

	local cp_array
	cp_array=()

	IFS=":"
	for part in $cp; do
	cp_array+=("$part")
	done
	IFS=$oldifs

	PARSE_CLASSPATH_RESULT=("${cp_array[@]}")
	}

	# Sets 'PARSE_CLASSPATH_RESULT' to an array of class path dex files.
	# e.g. (-cp foo/classes.dex:bar/classes.dex) -> (foo/classes.dex bar/classes.dex)
	find_cp_in_args() {
	local found="false"
	local index=0
	local what

	while [[ $# -gt 0 ]]; do
	case "$1" in
	-cp\|-classpath)
	parse_classpath "$2"
	# Sets 'PARSE_CLASSPATH_RESULT' to an array of class path dex files.
	# Subsequent parses will overwrite the preceding.
	shift
	;;
	esac
	shift
	done
	}

	# Delete the 'oat' directories relative to the classpath's dex files.
	# e.g. (foo/classes.dex bar/classes.dex) would delete (foo/oat bar/oat) directories.
	cleanup_oat_directory() {
	local classpath
	classpath=("$@")

	local dirpath

	for path in "${classpath[@]}"; do
	dirpath="$(dirname "$path")"
	[[ -d "$dirpath" ]] && verbose_run rm -rf "$dirpath/oat"
	done
	}

	# Parse -cp <CP>, -classpath <CP>, and $CLASSPATH to find the dex files.
	# Each dex file's directory will have an 'oat' file directory, delete it.
	# Input: Command line arguments to the art script.
	# e.g. -cp foo/classes.dex:bar/classes.dex would delete (foo/oat bar/oat) directories.
	cleanup_oat_directory_for_classpath() {
	if [ "$CLEAN_OAT_FILES" = "yes" ]; then
	# First try: Use $CLASSPATH environment variable.
	parse_classpath "$CLASSPATH"
	# Second try: Look for latest -cp or -classpath arg which will take precedence.
	find_cp_in_args "$@"

	cleanup_oat_directory "${PARSE_CLASSPATH_RESULT[@]}"
	fi
	}

	# Attempt to find $ANDROID_ROOT/framework/<isa>/core.art' without knowing what <isa> is.
	function check_if_boot_image_file_exists() {
	local image_location_dir="$1"
	local image_location_name="$2"

	# Expand image_files to a list of existing image files on the disk.
	# If no such files exist, it expands to single element 'dir//file' with a literal ''.
	local image_files
	image_files=("$image_location_dir"//"$image_location_name") # avoid treating "" as literal.

	# Array always has at least 1 element. Test explicitly whether the file exists.
	[[ -e "${image_files[0]}" ]]
	}

	# Automatically find the boot image location. It uses core.art by default.
	# On a real device, it might only have a boot.art, so use that instead when core.art does not exist.
	function detect_boot_image_location() {
	local image_location_dir="$ANDROID_ROOT/framework"
	local image_location_name="core.art"

	# If there are no existing core.art, try to find boot.art.
	# If there is no boot.art then leave it as-is, assumes -Ximage is explicitly used.
	# Otherwise let dalvikvm give the error message about an invalid image file.
	if ! check_if_boot_image_file_exists "$image_location_dir" "core.art" && \
	check_if_boot_image_file_exists "$image_location_dir" "boot.art"; then
	image_location_name="boot.art"
	fi

	local image_location="$image_location_dir/$image_location_name"
	echo "$image_location"
	}

	function run_dex2oat() {
	local class_loader_context=
	for dex_file in "${DEX2OAT_CLASSPATH[@]}"
	do
	while [ -h "$dex_file" ]; do
	# On Mac OS, readlink -f doesn't work.
	dex_file="$(readlink "$dex_file")"
	done
	# Create oat file directory.
	verbose_run mkdir -p $(dirname "$dex_file")/oat/$ISA
	local oat_file=$(basename "$dex_file")
	local oat_file=$(dirname "$dex_file")/oat/$ISA/${oat_file%.*}.odex
	# When running dex2oat use the exact same context as when running dalvikvm.
	# (see run_art function)
	verbose_run ANDROID_DATA=$ANDROID_DATA \
	ANDROID_ROOT=$ANDROID_ROOT \
	ANDROID_I18N_ROOT=$ANDROID_I18N_ROOT \
	ANDROID_ART_ROOT=$ANDROID_ART_ROOT \
	ANDROID_TZDATA_ROOT=$ANDROID_TZDATA_ROOT \
	LD_LIBRARY_PATH=$LD_LIBRARY_PATH \
	PATH=$ANDROID_ROOT/bin:$PATH \
	LD_USE_LOAD_BIAS=1 \
	ANDROID_LOG_TAGS=$ANDROID_LOG_TAGS \
	$DEX2OAT_BINARY_PATH \
	--runtime-arg -Xnorelocate \
	--boot-image=$DEX2OAT_BOOT_IMAGE \
	--instruction-set=$ISA \
	--class-loader-context="PCL[$class_loader_context]" \
	"${DEX2OAT_FLAGS[@]}" \
	--dex-file=$dex_file \
	--oat-file=$oat_file
	if [[ -n $class_loader_context ]]; then
	class_loader_context+=":"
	fi
	class_loader_context+="$dex_file"
	done
	}

	# Extract the dex2oat flags from the list of arguments.
	# -Xcompiler-options arguments are stored in DEX2OAT_FLAGS array
	# -cp argument is split by ':' and stored in DEX2OAT_CLASSPATH
	# -Ximage argument is stored in DEX2OAT_BOOT_IMAGE
	# -Xbootclasspath argument is stored in DEX2OAT_BCP
	# -Xbootclasspath-locations argument is stored in DEX2OAT_BCP_LOCS
	function extract_dex2oat_flags() {
	while [ $# -gt 0 ]; do
	case $1 in
	-Xcompiler-option)
	DEX2OAT_FLAGS+=("$2")
	shift
	;;
	-Ximage:*)
	DEX2OAT_BOOT_IMAGE=$1
	# Remove '-Ximage:' from the argument.
	DEX2OAT_BOOT_IMAGE=${DEX2OAT_BOOT_IMAGE##-Ximage:}
	;;
	-Xbootclasspath:*)
	DEX2OAT_BCP=$1
	# Remove '-Xbootclasspath:' from the argument.
	DEX2OAT_BCP=${DEX2OAT_BCP##-Xbootclasspath:}
	;;
	-Xbootclasspath-locations:*)
	DEX2OAT_BCP_LOCS=$1
	# Remove '-Xbootclasspath-locations:' from the argument.
	DEX2OAT_BCP_LOCS=${DEX2OAT_BCP_LOCS##-Xbootclasspath-locations:}
	;;
	-cp)
	# Reset any previously parsed classpath, just like dalvikvm
	# only supports one -cp argument.
	DEX2OAT_CLASSPATH=()
	# TODO: support -classpath and CLASSPATH
	local oifs=$IFS
	IFS=':'
	for classpath_elem in $2
	do
	DEX2OAT_CLASSPATH+=("$classpath_elem")
	done
	shift
	IFS=$oifs
	;;
	esac
	shift
	done
	}

	# Runs dalvikvm, returns its exit code.
	# (Oat directories are cleaned up in between runs)
	function run_art() {
	local ret

	# Run dalvikvm.
	verbose_run ANDROID_DATA="$ANDROID_DATA" \
	ANDROID_ROOT="$ANDROID_ROOT" \
	ANDROID_I18N_ROOT="$ANDROID_I18N_ROOT" \
	ANDROID_ART_ROOT="$ANDROID_ART_ROOT" \
	ANDROID_TZDATA_ROOT="$ANDROID_TZDATA_ROOT" \
	LD_LIBRARY_PATH="$LD_LIBRARY_PATH" \
	PATH="$ANDROID_ROOT/bin:$PATH" \
	LD_USE_LOAD_BIAS=1 \
	ANDROID_LOG_TAGS="$ANDROID_LOG_TAGS" \
	$LAUNCH_WRAPPER $ART_BINARY_PATH $lib \
	-XXlib:"$LIBART" \
	-Xnorelocate \
	-Ximage:"$DEFAULT_IMAGE_LOCATION" \
	"$@"
	ret=$?

	# Avoid polluting disk with 'oat' files after dalvikvm has finished.
	cleanup_oat_directory_for_classpath "$@"

	# Forward exit code of dalvikvm.
	return $ret
	}

	######################################
	# Globals
	######################################
	ART_BINARY=dalvikvm
	DEX2OAT_BINARY=dex2oat
	DEX2OAT_SUFFIX=""
	DELETE_ANDROID_DATA="no"
	LAUNCH_WRAPPER=
	LIBART=libart.so
	JIT_PROFILE="no"
	ALLOW_DEFAULT_JDWP="no"
	VERBOSE="no"
	CLEAN_OAT_FILES="yes"
	RUN_DEX2OAT="yes"
	EXTRA_OPTIONS=()
	DEX2OAT_FLAGS=()
	DEX2OAT_CLASSPATH=()

	# Parse arguments
	while [[ "$1" = "-"* ]]; do
	case "$1" in
	--)
	# No more arguments for this script.
	shift
	break
	;;
	--32)
	ART_BINARY=dalvikvm32
	DEX2OAT_SUFFIX=32
	;;
	--64)
	ART_BINARY=dalvikvm64
	DEX2OAT_SUFFIX=64
	;;
	-d)
	;& # Fallthrough
	--debug)
	LIBART="libartd.so"
	DEX2OAT_BINARY="dex2oatd"
	# Expect that debug mode wants all checks.
	EXTRA_OPTIONS+=(-XX:SlowDebug=true)
	;;
	--gdbserver)
	LAUNCH_WRAPPER="gdbserver $2"
	shift
	;;
	--gdb)
	LIBART="libartd.so"
	LAUNCH_WRAPPER="gdb --args"
	;;
	--help)
	usage
	exit 0
	;;
	--invoke-with)
	LAUNCH_WRAPPER=$2
	shift
	;;
	--perf)
	PERF="record"
	;;
	--perf-report)
	PERF="report"
	;;
	--profile)
	JIT_PROFILE="yes"
	;;
	--verbose)
	VERBOSE="yes"
	;;
	--no-clean)
	CLEAN_OAT_FILES="no"
	;;
	--no-compile)
	CLEAN_OAT_FILES="no"
	RUN_DEX2OAT="no"
	;;
	--allow-default-jdwp)
	ALLOW_DEFAULT_JDWP="yes"
	;;
	--*)
	echo "unknown option: $1" 1>&2
	usage
	exit 1
	;;
	*)
	break
	;;
	esac
	shift
	done

	if [ $# -eq 0 ]; then
	usage
	exit 1
	fi

	# Follow all sym links to get the program name.
	if [[ -n "$BASH_SOURCE" ]]; then
	PROG_NAME="$BASH_SOURCE"
	else
	PROG_NAME="$0"
	fi
	while [ -h "$PROG_NAME" ]; do
	# On Mac OS, readlink -f doesn't work.
	PROG_NAME="$(readlink "$PROG_NAME")"
	done

	PROG_DIR="$(cd "${PROG_NAME%/*}" ; pwd -P)"
	ANDROID_ROOT="$(cd $PROG_DIR/..; pwd -P)"

	# If ANDROID_I18N_ROOT is not set, try to detect whether we are running on
	# target or host and set that environment variable to the usual default value.
	if [ -z "$ANDROID_I18N_ROOT" ]; then
	# This script is used on host and target (device). However, the (expected)
	# default value `ANDROID_I18N_ROOT` is not the same on host and target:
	# - on host, `ANDROID_I18N_ROOT` is expected to be
	# "$ANDROID_ROOT/com.android.i18n";
	# - on target, `ANDROID_I18N_ROOT` is expected to be
	# "/apex/com.android.i18n".
	#
	# We use the presence/absence of the `$ANDROID_ROOT/../apex` directory to
	# determine whether we are on target or host (this is brittle, but simple).
	if [ -d "$ANDROID_ROOT/../apex" ]; then
	# Target case.
	ANDROID_I18N_ROOT="/apex/com.android.i18n"
	else
	# Host case.
	ANDROID_I18N_ROOT="$ANDROID_ROOT/com.android.i18n"
	fi
	fi

	# If ANDROID_ART_ROOT is not set, try to detect whether we are running on
	# target or host and set that environment variable to the usual default value.
	if [ -z "$ANDROID_ART_ROOT" ]; then
	# This script is used on host and target (device). However, the (expected)
	# default value `ANDROID_ART_ROOT` is not the same on host and target:
	# - on host, `ANDROID_ART_ROOT` is expected to be
	# "$ANDROID_ROOT/com.android.art";
	# - on target, `ANDROID_ART_ROOT` is expected to be
	# "/apex/com.android.art".
	#
	# We use the presence/absence of the `$ANDROID_ROOT/../apex` directory to
	# determine whether we are on target or host (this is brittle, but simple).
	if [ -d "$ANDROID_ROOT/../apex" ]; then
	# Target case.
	ANDROID_ART_ROOT="/apex/com.android.art"
	else
	# Host case.
	ANDROID_ART_ROOT="$ANDROID_ROOT/com.android.art"
	fi
	fi

	# If ANDROID_TZDATA_ROOT is not set, try to detect whether we are running on
	# target or host and set that environment variable to the usual default value.
	if [ -z "$ANDROID_TZDATA_ROOT" ]; then
	# This script is used on host and target (device). However, the (expected)
	# default value `ANDROID_TZDATA_ROOT` is not the same on host and target:
	# - on host, `ANDROID_TZDATA_ROOT` is expected to be
	# "$ANDROID_ROOT/com.android.tzdata";
	# - on target, `ANDROID_TZDATA_ROOT` is expected to be
	# "/apex/com.android.tzdata".
	#
	# We use the presence/absence of the `$ANDROID_ROOT/../apex` directory to
	# determine whether we are on target or host (this is brittle, but simple).
	if [ -d "$ANDROID_ROOT/../apex" ]; then
	# Target case.
	ANDROID_TZDATA_ROOT="/apex/com.android.tzdata"
	else
	# Host case.
	ANDROID_TZDATA_ROOT="$ANDROID_ROOT/com.android.tzdata"
	fi
	fi

	ART_BINARY_PATH=$ANDROID_ROOT/bin/$ART_BINARY

	if [ ! -x "$ART_BINARY_PATH" ]; then
	cat 1>&2 <<EOF
	Android Runtime not found: $ART_BINARY_PATH
	This script should be in the same directory as the Android Runtime ($ART_BINARY).
	EOF
	exit 1
	fi

	DEX2OAT_BINARY_PATH=$ANDROID_ROOT/bin/$DEX2OAT_BINARY$DEX2OAT_SUFFIX

	if [ ! -x "$DEX2OAT_BINARY_PATH" ]; then
	echo "Warning: Android Compiler not found: $DEX2OAT_BINARY_PATH"
	fi

	######################################
	# Main program
	######################################

	# If android logging is not explicitly set, only print warnings and errors.
	if [ -z "$ANDROID_LOG_TAGS" ]; then
	ANDROID_LOG_TAGS='*:w'
	fi

	LIBDIR="$(find_libdir $ART_BINARY_PATH)"
	LD_LIBRARY_PATH=$ANDROID_ROOT/$LIBDIR
	DEFAULT_IMAGE_LOCATION="$(detect_boot_image_location)"
	DEX2OAT_BOOT_IMAGE="$DEFAULT_IMAGE_LOCATION"
	ISA=$(LD_LIBRARY_PATH=$LD_LIBRARY_PATH $ART_BINARY_PATH -showversion \| (read art version number isa && echo $isa))

	# Extract the dex2oat flags from the list of arguments.
	# -Xcompiler-options arguments are stored in DEX2OAT_FLAGS array
	# -cp argument is split by ':' and stored in DEX2OAT_CLASSPATH
	# -Ximage argument is stored in DEX2OAT_BOOT_IMAGE
	extract_dex2oat_flags "$@"

	# If ANDROID_DATA is the system ANDROID_DATA or is not set, use our own,
	# and ensure we delete it at the end.
	if [ "$ANDROID_DATA" = "/data" ] \|\| [ "$ANDROID_DATA" = "" ]; then
	if [[ $PWD != / ]]; then
	ANDROID_DATA="$PWD/android-data$$"
	else
	# Use /data/local/tmp when running this from adb shell, since it starts out in /
	# by default.
	ANDROID_DATA="$ANDROID_DATA/local/tmp/android-data$$"
	fi
	mkdir -p "$ANDROID_DATA"
	DELETE_ANDROID_DATA="yes"
	fi

	if [[ "$DEX2OAT_BCP" = "" && "$DEX2OAT_BCP_LOCS" != "" ]]; then
	echo "Cannot use -Xbootclasspath-locations without -Xbootclasspath"
	exit 1
	fi

	if [[ "$DEX2OAT_BOOT_IMAGE" = core.art && "$DEX2OAT_BCP" = "" ]]; then
	# Note: This must start with the CORE_IMG_JARS in Android.common_path.mk
	# because that's what we use for compiling the core.art image.
	# It may contain additional modules from TEST_CORE_JARS.
	core_jars_list="core-oj core-libart core-icu4j okhttp bouncycastle apache-xml"
	core_jars_suffix=
	if [[ -e $ANDROID_ROOT/framework/core-oj-hostdex.jar ]]; then
	core_jars_suffix=-hostdex
	core_filenames_dir=$ANDROID_ROOT/framework
	core_locations_dir=$ANDROID_ROOT/framework
	prefix=$PWD/
	if [[ ${core_locations_dir:0:${#prefix}} = $prefix ]]; then
	core_locations_dir="${core_locations_dir##$prefix}"
	fi
	elif [[ -e $ANDROID_ROOT/apex/com.android.art/javalib/core-oj.jar ]]; then
	core_jars_suffix=
	core_filenames_dir=$ANDROID_ROOT/apex/com.android.art/javalib
	core_locations_dir=/apex/com.android.art/javalib
	else
	echo "Can not find jar files for boot image $DEX2OAT_BOOT_IMAGE"
	exit 1
	fi
	if [[ $core_locations_dir != "" ]]; then
	boot_separator=""
	for boot_module in ${core_jars_list}; do
	DEX_FILENAME="$boot_module$core_jars_suffix.jar"
	DEX2OAT_BCP+="$boot_separator$core_filenames_dir/${DEX_FILENAME}"
	DEX2OAT_BCP_LOCS+="$boot_separator$core_locations_dir/${DEX_FILENAME}"
	boot_separator=":"
	done
	if [ "$VERBOSE" = "yes" ]; then
	echo "Using predefined -Xbootclasspath for image $DEX2OAT_BOOT_IMAGE:"
	echo DEX2OAT_BOOT_IMAGE=$DEX2OAT_BOOT_IMAGE
	echo DEX2OAT_BCP=$DEX2OAT_BCP
	echo DEX2OAT_BCP_LOCS=$DEX2OAT_BCP_LOCS
	fi
	fi
	fi

	if [ "$DEX2OAT_BCP" != "" ]; then
	EXTRA_OPTIONS+=("-Xbootclasspath:$DEX2OAT_BCP")
	DEX2OAT_FLAGS+=("--runtime-arg" "-Xbootclasspath:$DEX2OAT_BCP")
	if [ "$DEX2OAT_BCP_LOCS" != "" ]; then
	EXTRA_OPTIONS+=("-Xbootclasspath-locations:$DEX2OAT_BCP_LOCS")
	DEX2OAT_FLAGS+=("--runtime-arg" \
	"-Xbootclasspath-locations:$DEX2OAT_BCP_LOCS")
	fi
	fi

	if [ "$PERF" != "" ]; then
	LAUNCH_WRAPPER="perf record -g --call-graph dwarf -F 10000 -o $ANDROID_DATA/perf.data -e cycles:u $LAUNCH_WRAPPER"
	DEX2OAT_FLAGS+=(--generate-debug-info)
	fi

	if [ "$ALLOW_DEFAULT_JDWP" = "no" ]; then
	EXTRA_OPTIONS+=(-XjdwpProvider:none)
	fi

	# First cleanup any left-over 'oat' files from the last time dalvikvm was run.
	cleanup_oat_directory_for_classpath "$@"

	# Protect additional arguments in quotes to preserve whitespaces (used by
	# run-jdwp-test.sh when running on device), '$' (may be used as part of
	# classpath) and other special characters when evaluated.
	EXTRA_OPTIONS+=("$@")

	if [ "$JIT_PROFILE" = "yes" ]; then
	# Create the profile. The runtime expects profiles to be created before
	# execution.
	PROFILE_PATH="$ANDROID_DATA/primary.prof"
	touch "$PROFILE_PATH"

	run_art -Xjitsaveprofilinginfo \
	-Xps-min-methods-to-save:1 \
	-Xps-min-classes-to-save:1 \
	-Xps-min-notification-before-wake:10 \
	-Xps-profile-path:$PROFILE_PATH \
	-Xusejit:true \
	${EXTRA_OPTIONS[@]} \
	&> "$ANDROID_DATA/profile_gen.log"
	EXIT_STATUS=$?

	if [ $EXIT_STATUS != 0 ]; then
	echo "Profile run failed: " >&2
	cat "$ANDROID_DATA/profile_gen.log" >&2
	clean_android_data
	exit $EXIT_STATUS
	fi

	# Wipe dalvik-cache so that a subsequent run_art must regenerate it.
	# Leave $ANDROID_DATA intact since it contains our profile file.
	rm -rf "$ANDROID_DATA/dalvik-cache"

	# Append arguments so next invocation of run_art uses the profile.
	DEX2OAT_FLAGS+=(--profile-file="$PROFILE_PATH")
	fi

	if [ -x "$DEX2OAT_BINARY_PATH" ]; then
	if [ "$RUN_DEX2OAT" = "yes" ]; then
	# Run dex2oat before launching ART to generate the oat files for the classpath.
	run_dex2oat
	fi
	fi

	# Do not continue if the dex2oat failed.
	EXIT_STATUS=$?
	if [ $EXIT_STATUS != 0 ]; then
	echo "Failed dex2oat invocation" >&2
	exit $EXIT_STATUS
	fi

	run_art "${EXTRA_OPTIONS[@]}"
	EXIT_STATUS=$?

	if [ "$PERF" != "" ]; then
	if [ "$PERF" = report ]; then
	perf report -i $ANDROID_DATA/perf.data
	fi
	echo "Perf data saved in: $ANDROID_DATA/perf.data"
	else
	# Perf output is placed under $ANDROID_DATA so not cleaned when perf options used.
	clean_android_data
	fi

	exit $EXIT_STATUS