| #!/bin/bash |
| # |
| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Set up prog to be the path of this script, including following symlinks, |
| # and set up progdir to be the fully-qualified pathname of its directory. |
| prog="$0" |
| args="$@" |
| while [ -h "${prog}" ]; do |
| newProg=`/bin/ls -ld "${prog}"` |
| newProg=`expr "${newProg}" : ".* -> \(.*\)$"` |
| if expr "x${newProg}" : 'x/' >/dev/null; then |
| prog="${newProg}" |
| else |
| progdir=`dirname "${prog}"` |
| prog="${progdir}/${newProg}" |
| fi |
| done |
| oldwd=`pwd` |
| progdir=`dirname "${prog}"` |
| cd "${progdir}" |
| progdir=`pwd` |
| prog="${progdir}"/`basename "${prog}"` |
| test_dir="test-$$" |
| if [ -z "$TMPDIR" ]; then |
| tmp_dir="/tmp/$USER/${test_dir}" |
| else |
| tmp_dir="${TMPDIR}/${test_dir}" |
| fi |
| checker="${progdir}/../tools/checker/checker.py" |
| export JAVA="java" |
| export JAVAC="javac -g -Xlint:-options -source 1.8 -target 1.8" |
| export RUN="${progdir}/etc/run-test-jar" |
| export DEX_LOCATION=/data/run-test/${test_dir} |
| export NEED_DEX="true" |
| export USE_D8="true" |
| export USE_DESUGAR="true" |
| export SMALI_ARGS="" |
| |
| # If d8 was not set by the environment variable, assume it is in the path. |
| if [ -z "$D8" ]; then |
| export D8="d8" |
| fi |
| |
| # If dx was not set by the environment variable, assume it is in the path. |
| if [ -z "$DX" ]; then |
| export DX="d8-compat-dx" |
| fi |
| |
| export DEXMERGER="$D8" |
| |
| # If jasmin was not set by the environment variable, assume it is in the path. |
| if [ -z "$JASMIN" ]; then |
| export JASMIN="jasmin" |
| fi |
| |
| # If smali was not set by the environment variable, assume it is in the path. |
| if [ -z "$SMALI" ]; then |
| export SMALI="smali" |
| fi |
| |
| # ANDROID_BUILD_TOP is not set in a build environment. |
| if [ -z "$ANDROID_BUILD_TOP" ]; then |
| export ANDROID_BUILD_TOP=$oldwd |
| fi |
| |
| # OUT_DIR defaults to out, and may be relative to $ANDROID_BUILD_TOP. |
| # Convert it to an absolute path, since we cd into the tmp_dir to run the tests. |
| export OUT_DIR=${OUT_DIR:-out} |
| if [[ "$OUT_DIR" != /* ]]; then |
| export OUT_DIR=$ANDROID_BUILD_TOP/$OUT_DIR |
| fi |
| |
| # ANDROID_HOST_OUT is not set in a build environment. |
| if [ -z "$ANDROID_HOST_OUT" ]; then |
| export ANDROID_HOST_OUT=${OUT_DIR}/host/linux-x86 |
| fi |
| |
| host_lib_root=${ANDROID_HOST_OUT} |
| |
| # Allow changing DESUGAR script to something else, or to disable it with DESUGAR=false. |
| if [ -z "$DESUGAR" ]; then |
| export DESUGAR="$ANDROID_BUILD_TOP/art/tools/desugar.sh" |
| fi |
| |
| # Zipalign is not on the PATH in some configs, auto-detect it. |
| if [ -z "$ZIPALIGN" ]; then |
| if which zipalign >/dev/null; then |
| ZIPALIGN="zipalign"; |
| else |
| # TODO: Add a dependency for zipalign in Android.run-test.mk |
| # once it doesn't depend on libandroidfw (b/35246701) |
| case "$OSTYPE" in |
| darwin*) ZIPALIGN="$ANDROID_BUILD_TOP/prebuilts/sdk/tools/darwin/bin/zipalign" ;; |
| linux*) ZIPALIGN="$ANDROID_BUILD_TOP/prebuilts/sdk/tools/linux/bin/zipalign" ;; |
| *) echo "Can't find zipalign: unknown: $OSTYPE" >&2;; |
| esac |
| fi |
| fi |
| export ZIPALIGN |
| |
| # If hiddenapi was not set by the environment variable, assume it is in |
| # ANDROID_HOST_OUT. |
| if [ -z "$HIDDENAPI" ]; then |
| export HIDDENAPI="${ANDROID_HOST_OUT}/bin/hiddenapi" |
| fi |
| |
| chroot= |
| |
| info="info.txt" |
| build="build" |
| run="run" |
| expected="expected.txt" |
| check_cmd="check" |
| output="output.txt" |
| build_output="build-output.txt" |
| cfg_output="graph.cfg" |
| strace_output="strace-output.txt" |
| lib="libartd.so" |
| testlib="arttestd" |
| run_args=(--quiet) |
| build_args="" |
| |
| quiet="no" |
| debuggable="no" |
| prebuild_mode="yes" |
| target_mode="yes" |
| dev_mode="no" |
| create_runner="no" |
| update_mode="no" |
| debug_mode="no" |
| relocate="no" |
| runtime="art" |
| usage="no" |
| build_only="no" |
| suffix64="" |
| trace="false" |
| trace_stream="false" |
| basic_verify="false" |
| gc_verify="false" |
| gc_stress="false" |
| jvmti_trace_stress="false" |
| jvmti_field_stress="false" |
| jvmti_step_stress="false" |
| jvmti_redefine_stress="false" |
| strace="false" |
| always_clean="no" |
| never_clean="no" |
| have_image="yes" |
| android_root="/system" |
| bisection_search="no" |
| timeout="" |
| suspend_timeout="500000" |
| run_optimizing="false" |
| |
| # To cause tests to fail fast, limit the file sizes created by dx, dex2oat and |
| # ART output to approximately 128MB. This should be more than sufficient |
| # for any test while still catching cases of runaway output. |
| # Set a hard limit to encourage ART developers to increase the ulimit here if |
| # needed to support a test case rather than resetting the limit in the run |
| # script for the particular test in question. Adjust this if needed for |
| # particular configurations. |
| file_ulimit=128000 |
| |
| |
| while true; do |
| if [ "x$1" = "x--host" ]; then |
| target_mode="no" |
| DEX_LOCATION=$tmp_dir |
| run_args+=(--host) |
| shift |
| elif [ "x$1" = "x--quiet" ]; then |
| quiet="yes" |
| shift |
| elif [ "x$1" = "x--use-java-home" ]; then |
| if [ -n "${JAVA_HOME}" ]; then |
| export JAVA="${JAVA_HOME}/bin/java" |
| export JAVAC="${JAVA_HOME}/bin/javac -g" |
| else |
| echo "Passed --use-java-home without JAVA_HOME variable set!" |
| usage="yes" |
| fi |
| shift |
| elif [ "x$1" = "x--jvm" ]; then |
| target_mode="no" |
| DEX_LOCATION="$tmp_dir" |
| runtime="jvm" |
| prebuild_mode="no" |
| NEED_DEX="false" |
| run_args+=(--jvm) |
| shift |
| elif [ "x$1" = "x-O" ]; then |
| lib="libart.so" |
| testlib="arttest" |
| run_args+=(-O) |
| shift |
| elif [ "x$1" = "x--dalvik" ]; then |
| lib="libdvm.so" |
| runtime="dalvik" |
| shift |
| elif [ "x$1" = "x--no-image" ]; then |
| have_image="no" |
| shift |
| elif [ "x$1" = "x--relocate" ]; then |
| relocate="yes" |
| shift |
| elif [ "x$1" = "x--no-relocate" ]; then |
| relocate="no" |
| shift |
| elif [ "x$1" = "x--prebuild" ]; then |
| run_args+=(--prebuild) |
| prebuild_mode="yes" |
| shift; |
| elif [ "x$1" = "x--compact-dex-level" ]; then |
| option="$1" |
| shift |
| run_args+=("$option" "$1") |
| shift; |
| elif [ "x$1" = "x--strip-dex" ]; then |
| run_args+=(--strip-dex) |
| shift; |
| elif [ "x$1" = "x--debuggable" ]; then |
| run_args+=(-Xcompiler-option --debuggable) |
| debuggable="yes" |
| shift; |
| elif [ "x$1" = "x--no-prebuild" ]; then |
| run_args+=(--no-prebuild) |
| prebuild_mode="no" |
| shift; |
| elif [ "x$1" = "x--gcverify" ]; then |
| basic_verify="true" |
| gc_verify="true" |
| shift |
| elif [ "x$1" = "x--gcstress" ]; then |
| basic_verify="true" |
| gc_stress="true" |
| shift |
| elif [ "x$1" = "x--jvmti-step-stress" ]; then |
| jvmti_step_stress="true" |
| shift |
| elif [ "x$1" = "x--jvmti-redefine-stress" ]; then |
| jvmti_redefine_stress="true" |
| shift |
| elif [ "x$1" = "x--jvmti-field-stress" ]; then |
| jvmti_field_stress="true" |
| shift |
| elif [ "x$1" = "x--jvmti-trace-stress" ]; then |
| jvmti_trace_stress="true" |
| shift |
| elif [ "x$1" = "x--suspend-timeout" ]; then |
| shift |
| suspend_timeout="$1" |
| shift |
| elif [ "x$1" = "x--image" ]; then |
| shift |
| image="$1" |
| run_args+=(--image "$image") |
| shift |
| elif [ "x$1" = "x-Xcompiler-option" ]; then |
| shift |
| option="$1" |
| run_args+=(-Xcompiler-option "$option") |
| shift |
| elif [ "x$1" = "x--build-option" ]; then |
| shift |
| option="$1" |
| build_args="${build_args} $option" |
| shift |
| elif [ "x$1" = "x--runtime-option" ]; then |
| shift |
| option="$1" |
| run_args+=(--runtime-option "$option") |
| shift |
| elif [ "x$1" = "x--gdb-arg" ]; then |
| shift |
| gdb_arg="$1" |
| run_args+=(--gdb-arg "$gdb_arg") |
| shift |
| elif [ "x$1" = "x--debug" ]; then |
| run_args+=(--debug) |
| shift |
| elif [ "x$1" = "x--debug-wrap-agent" ]; then |
| run_args+=(--debug-wrap-agent) |
| shift |
| elif [ "x$1" = "x--with-agent" ]; then |
| shift |
| option="$1" |
| run_args+=(--with-agent "$1") |
| shift |
| elif [ "x$1" = "x--debug-agent" ]; then |
| shift |
| option="$1" |
| run_args+=(--debug-agent "$1") |
| shift |
| elif [ "x$1" = "x--gdb" ]; then |
| run_args+=(--gdb) |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--gdbserver-bin" ]; then |
| shift |
| run_args+=(--gdbserver-bin "$1") |
| shift |
| elif [ "x$1" = "x--gdbserver-port" ]; then |
| shift |
| run_args+=(--gdbserver-port "$1") |
| shift |
| elif [ "x$1" = "x--gdbserver" ]; then |
| run_args+=(--gdbserver) |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--strace" ]; then |
| strace="yes" |
| run_args+=(--invoke-with strace --invoke-with -o --invoke-with "$tmp_dir/$strace_output") |
| timeout="${timeout:-1800}" |
| shift |
| elif [ "x$1" = "x--zygote" ]; then |
| run_args+=(--zygote) |
| shift |
| elif [ "x$1" = "x--interpreter" ]; then |
| run_args+=(--interpreter) |
| shift |
| elif [ "x$1" = "x--jit" ]; then |
| run_args+=(--jit) |
| shift |
| elif [ "x$1" = "x--baseline" ]; then |
| run_args+=(--baseline) |
| shift |
| elif [ "x$1" = "x--optimizing" ]; then |
| run_optimizing="true" |
| shift |
| elif [ "x$1" = "x--no-verify" ]; then |
| run_args+=(--no-verify) |
| shift |
| elif [ "x$1" = "x--verify-soft-fail" ]; then |
| run_args+=(--verify-soft-fail) |
| shift |
| elif [ "x$1" = "x--no-optimize" ]; then |
| run_args+=(--no-optimize) |
| shift |
| elif [ "x$1" = "x--no-precise" ]; then |
| run_args+=(--no-precise) |
| shift |
| elif [ "x$1" = "x--invoke-with" ]; then |
| shift |
| what="$1" |
| if [ "x$what" = "x" ]; then |
| echo "$0 missing argument to --invoke-with" 1>&2 |
| usage="yes" |
| break |
| fi |
| run_args+=(--invoke-with "${what}") |
| shift |
| elif [ "x$1" = "x--create-runner" ]; then |
| run_args+=(--create-runner --dry-run) |
| dev_mode="yes" |
| never_clean="yes" |
| create_runner="yes" |
| shift |
| elif [ "x$1" = "x--dev" ]; then |
| run_args+=(--dev) |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--build-only" ]; then |
| build_only="yes" |
| shift |
| elif [ "x$1" = "x--output-path" ]; then |
| shift |
| tmp_dir=$1 |
| if [ "x$tmp_dir" = "x" ]; then |
| echo "$0 missing argument to --output-path" 1>&2 |
| usage="yes" |
| break |
| fi |
| shift |
| elif [ "x$1" = "x--chroot" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --chroot" 1>&2 |
| usage="yes" |
| break |
| fi |
| chroot="$1" |
| run_args+=(--chroot "$1") |
| shift |
| elif [ "x$1" = "x--android-root" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --android-root" 1>&2 |
| usage="yes" |
| break |
| fi |
| android_root="$1" |
| run_args+=(--android-root "$1") |
| shift |
| elif [ "x$1" = "x--android-art-root" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --android-art-root" 1>&2 |
| usage="yes" |
| break |
| fi |
| run_args+=(--android-art-root "$1") |
| shift |
| elif [ "x$1" = "x--android-tzdata-root" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --android-tzdata-root" 1>&2 |
| usage="yes" |
| break |
| fi |
| run_args+=(--android-tzdata-root "$1") |
| shift |
| elif [ "x$1" = "x--update" ]; then |
| update_mode="yes" |
| shift |
| elif [ "x$1" = "x--help" ]; then |
| usage="yes" |
| shift |
| elif [ "x$1" = "x--64" ]; then |
| run_args+=(--64) |
| suffix64="64" |
| shift |
| elif [ "x$1" = "x--bionic" ]; then |
| # soong linux_bionic builds are 64bit only. |
| run_args+=(--bionic --host --64) |
| suffix64="64" |
| target_mode="no" |
| DEX_LOCATION=$tmp_dir |
| host_lib_root=$OUT_DIR/soong/host/linux_bionic-x86 |
| shift |
| elif [ "x$1" = "x--runtime-extracted-zipapex" ]; then |
| shift |
| # TODO Should we allow the java.library.path to search the zipapex too? |
| # Not needed at the moment and adding it will be complicated so for now |
| # we'll ignore this. |
| run_args+=(--host --runtime-extracted-zipapex "$1") |
| target_mode="no" |
| DEX_LOCATION=$tmp_dir |
| shift |
| elif [ "x$1" = "x--runtime-zipapex" ]; then |
| shift |
| # TODO Should we allow the java.library.path to search the zipapex too? |
| # Not needed at the moment and adding it will be complicated so for now |
| # we'll ignore this. |
| run_args+=(--host --runtime-zipapex "$1") |
| target_mode="no" |
| DEX_LOCATION=$tmp_dir |
| # apex_payload.zip is quite large we need a high enough ulimit to |
| # extract it. 512mb should be good enough. |
| file_ulimit=512000 |
| shift |
| elif [ "x$1" = "x--timeout" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --timeout" 1>&2 |
| usage="yes" |
| break |
| fi |
| timeout="$1" |
| shift |
| elif [ "x$1" = "x--trace" ]; then |
| trace="true" |
| shift |
| elif [ "x$1" = "x--stream" ]; then |
| trace_stream="true" |
| shift |
| elif [ "x$1" = "x--always-clean" ]; then |
| always_clean="yes" |
| shift |
| elif [ "x$1" = "x--never-clean" ]; then |
| never_clean="yes" |
| shift |
| elif [ "x$1" = "x--dex2oat-swap" ]; then |
| run_args+=(--dex2oat-swap) |
| shift |
| elif [ "x$1" = "x--instruction-set-features" ]; then |
| shift |
| run_args+=(--instruction-set-features "$1") |
| shift |
| elif [ "x$1" = "x--bisection-search" ]; then |
| bisection_search="yes" |
| shift |
| elif [ "x$1" = "x--vdex" ]; then |
| run_args+=(--vdex) |
| shift |
| elif [ "x$1" = "x--dm" ]; then |
| run_args+=(--dm) |
| shift |
| elif [ "x$1" = "x--vdex-filter" ]; then |
| shift |
| filter=$1 |
| run_args+=(--vdex-filter "$filter") |
| shift |
| elif [ "x$1" = "x--random-profile" ]; then |
| run_args+=(--random-profile) |
| shift |
| elif [ "x$1" = "x--dex2oat-jobs" ]; then |
| shift |
| run_args+=(-Xcompiler-option "-j$1") |
| shift |
| elif expr "x$1" : "x--" >/dev/null 2>&1; then |
| echo "unknown $0 option: $1" 1>&2 |
| usage="yes" |
| break |
| else |
| break |
| fi |
| done |
| |
| if [ "$usage" = "no" -a "x$1" = "x" ]; then |
| echo "missing test to run" 1>&2 |
| usage="yes" |
| fi |
| |
| # The DEX_LOCATION with the chroot prefix, if any. |
| chroot_dex_location="$chroot$DEX_LOCATION" |
| |
| # Allocate file descriptor real_stderr and redirect it to the shell's error |
| # output (fd 2). |
| if [ ${BASH_VERSINFO[1]} -ge 4 ] && [ ${BASH_VERSINFO[2]} -ge 1 ]; then |
| exec {real_stderr}>&2 |
| else |
| # In bash before version 4.1 we need to do a manual search for free file |
| # descriptors. |
| FD=3 |
| while [ -e /dev/fd/$FD ]; do FD=$((FD + 1)); done |
| real_stderr=$FD |
| eval "exec ${real_stderr}>&2" |
| fi |
| if [ "$quiet" = "yes" ]; then |
| # Force the default standard output and error to go to /dev/null so we will |
| # not print them. |
| exec 1>/dev/null |
| exec 2>/dev/null |
| fi |
| |
| function err_echo() { |
| echo "$@" 1>&${real_stderr} |
| } |
| |
| # tmp_dir may be relative, resolve. |
| # |
| # Cannot use realpath, as it does not exist on Mac. |
| # Cannot use a simple "cd", as the path might not be created yet. |
| # Cannot use readlink -m, as it does not exist on Mac. |
| # Fallback to nuclear option: |
| noncanonical_tmp_dir=$tmp_dir |
| tmp_dir="`cd $oldwd ; python -c "import os; import sys; sys.stdout.write(os.path.realpath('$tmp_dir'))"`" |
| if [ -z $tmp_dir ] ; then |
| err_echo "Failed to resolve $tmp_dir" |
| exit 1 |
| fi |
| mkdir -p $tmp_dir |
| |
| # Add thread suspend timeout flag |
| if [ ! "$runtime" = "jvm" ]; then |
| run_args+=(--runtime-option "-XX:ThreadSuspendTimeout=$suspend_timeout") |
| fi |
| |
| if [ "$basic_verify" = "true" ]; then |
| # Set HspaceCompactForOOMMinIntervalMs to zero to run hspace compaction for OOM more frequently in tests. |
| run_args+=(--runtime-option -Xgc:preverify --runtime-option -Xgc:postverify --runtime-option -XX:HspaceCompactForOOMMinIntervalMs=0) |
| fi |
| if [ "$gc_verify" = "true" ]; then |
| run_args+=(--runtime-option -Xgc:preverify_rosalloc --runtime-option -Xgc:postverify_rosalloc) |
| fi |
| if [ "$gc_stress" = "true" ]; then |
| run_args+=(--gc-stress --runtime-option -Xgc:gcstress --runtime-option -Xms2m --runtime-option -Xmx16m) |
| fi |
| if [ "$jvmti_redefine_stress" = "true" ]; then |
| run_args+=(--no-app-image --jvmti-redefine-stress) |
| fi |
| if [ "$jvmti_step_stress" = "true" ]; then |
| run_args+=(--no-app-image --jvmti-step-stress) |
| fi |
| if [ "$jvmti_field_stress" = "true" ]; then |
| run_args+=(--no-app-image --jvmti-field-stress) |
| fi |
| if [ "$jvmti_trace_stress" = "true" ]; then |
| run_args+=(--no-app-image --jvmti-trace-stress) |
| fi |
| if [ "$trace" = "true" ]; then |
| run_args+=(--runtime-option -Xmethod-trace --runtime-option -Xmethod-trace-file-size:2000000) |
| if [ "$trace_stream" = "true" ]; then |
| # Streaming mode uses the file size as the buffer size. So output gets really large. Drop |
| # the ability to analyze the file and just write to /dev/null. |
| run_args+=(--runtime-option -Xmethod-trace-file:/dev/null) |
| # Enable streaming mode. |
| run_args+=(--runtime-option -Xmethod-trace-stream) |
| else |
| run_args+=(--runtime-option "-Xmethod-trace-file:${DEX_LOCATION}/trace.bin") |
| fi |
| elif [ "$trace_stream" = "true" ]; then |
| err_echo "Cannot use --stream without --trace." |
| exit 1 |
| fi |
| if [ -n "$timeout" ]; then |
| run_args+=(--timeout "$timeout") |
| fi |
| |
| # Most interesting target architecture variables are Makefile variables, not environment variables. |
| # Try to map the suffix64 flag and what we find in ${ANDROID_PRODUCT_OUT}/data/art-test to an architecture name. |
| function guess_target_arch_name() { |
| # Check whether this is a device with native bridge. Currently this is hardcoded |
| # to x86 + arm. |
| x86_arm=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | sort | grep -E '^(arm|x86)$'` |
| # Collapse line-breaks into spaces |
| x86_arm=$(echo $x86_arm) |
| if [ "x$x86_arm" = "xarm x86" ] ; then |
| err_echo "Native-bridge configuration detected." |
| # We only support the main arch for tests. |
| if [ "x${suffix64}" = "x64" ]; then |
| target_arch_name="" |
| else |
| target_arch_name=x86 |
| fi |
| else |
| grep32bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm|x86)$'` |
| grep64bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm64|x86_64)$'` |
| if [ "x${suffix64}" = "x64" ]; then |
| target_arch_name=${grep64bit} |
| else |
| target_arch_name=${grep32bit} |
| fi |
| fi |
| } |
| |
| function guess_host_arch_name() { |
| if [ "x${suffix64}" = "x64" ]; then |
| host_arch_name="x86_64" |
| else |
| host_arch_name="x86" |
| fi |
| } |
| |
| if [ "$target_mode" = "no" ]; then |
| if [ "$runtime" = "jvm" ]; then |
| if [ "$prebuild_mode" = "yes" ]; then |
| err_echo "--prebuild with --jvm is unsupported" |
| exit 1 |
| fi |
| else |
| # ART/Dalvik host mode. |
| if [ -n "$chroot" ]; then |
| err_echo "--chroot with --host is unsupported" |
| exit 1 |
| fi |
| fi |
| fi |
| |
| if [ ! "$runtime" = "jvm" ]; then |
| run_args+=(--lib "$lib") |
| fi |
| |
| if [ "$runtime" = "dalvik" ]; then |
| if [ "$target_mode" = "no" ]; then |
| framework="${ANDROID_PRODUCT_OUT}/system/framework" |
| bpath="${framework}/core-icu4j.jar:${framework}/core-libart.jar:${framework}/core-oj.jar:${framework}/conscrypt.jar:${framework}/okhttp.jar:${framework}/bouncycastle.jar:${framework}/ext.jar" |
| run_args+=(--boot --runtime-option "-Xbootclasspath:${bpath}") |
| else |
| true # defaults to using target BOOTCLASSPATH |
| fi |
| elif [ "$runtime" = "art" ]; then |
| if [ "$target_mode" = "no" ]; then |
| guess_host_arch_name |
| run_args+=(--boot "${ANDROID_HOST_OUT}/framework/core.art:*") |
| run_args+=(--runtime-option "-Djava.library.path=${host_lib_root}/lib${suffix64}:${host_lib_root}/nativetest${suffix64}") |
| else |
| guess_target_arch_name |
| run_args+=(--runtime-option "-Djava.library.path=/data/nativetest${suffix64}/art/${target_arch_name}") |
| run_args+=(--boot "/data/art-test/core.art:/data/art-test/*") |
| fi |
| if [ "$relocate" = "yes" ]; then |
| run_args+=(--relocate) |
| else |
| run_args+=(--no-relocate) |
| fi |
| elif [ "$runtime" = "jvm" ]; then |
| # TODO: Detect whether the host is 32-bit or 64-bit. |
| run_args+=(--runtime-option "-Djava.library.path=${ANDROID_HOST_OUT}/lib64:${ANDROID_HOST_OUT}/nativetest64") |
| fi |
| |
| if [ "$have_image" = "no" ]; then |
| if [ "$runtime" != "art" ]; then |
| err_echo "--no-image is only supported on the art runtime" |
| exit 1 |
| fi |
| run_args+=(--no-image) |
| fi |
| |
| if [ "$create_runner" = "yes" -a "$target_mode" = "yes" ]; then |
| err_echo "--create-runner does not function for non --host tests" |
| usage="yes" |
| fi |
| |
| if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then |
| err_echo "--dev and --update are mutually exclusive" |
| usage="yes" |
| fi |
| |
| if [ "$dev_mode" = "yes" -a "$quiet" = "yes" ]; then |
| err_echo "--dev and --quiet are mutually exclusive" |
| usage="yes" |
| fi |
| |
| if [ "$bisection_search" = "yes" -a "$prebuild_mode" = "yes" ]; then |
| err_echo "--bisection-search and --prebuild are mutually exclusive" |
| usage="yes" |
| fi |
| |
| # TODO: Chroot-based bisection search is not supported yet (see below); implement it. |
| if [ "$bisection_search" = "yes" -a -n "$chroot" ]; then |
| err_echo "--chroot with --bisection-search is unsupported" |
| exit 1 |
| fi |
| |
| if [ "$usage" = "no" ]; then |
| if [ "x$1" = "x" -o "x$1" = "x-" ]; then |
| test_dir=`basename "$oldwd"` |
| else |
| test_dir="$1" |
| fi |
| |
| if [ '!' -d "$test_dir" ]; then |
| td2=`echo ${test_dir}-*` |
| if [ '!' -d "$td2" ]; then |
| err_echo "${test_dir}: no such test directory" |
| usage="yes" |
| fi |
| test_dir="$td2" |
| fi |
| # Shift to get rid of the test name argument. The rest of the arguments |
| # will get passed to the test run. |
| shift |
| fi |
| |
| if [ "$usage" = "yes" ]; then |
| prog=`basename $prog` |
| ( |
| echo "usage:" |
| echo " $prog --help Print this message." |
| echo " $prog [options] [test-name] Run test normally." |
| echo " $prog --dev [options] [test-name] Development mode" \ |
| "(dumps to stdout)." |
| echo " $prog --create-runner [options] [test-name]" |
| echo " Creates a runner script for use with other " \ |
| "tools (e.g. parallel_run.py)." |
| echo " The script will only run the test portion, and " \ |
| "share oat and dex files." |
| echo " $prog --update [options] [test-name] Update mode" \ |
| "(replaces expected.txt)." |
| echo ' Omitting the test name or specifying "-" will use the' \ |
| "current directory." |
| echo " Runtime Options:" |
| echo " -O Run non-debug rather than debug build (off by default)." |
| echo " -Xcompiler-option Pass an option to the compiler." |
| echo " --build-option Pass an option to the build script." |
| echo " --runtime-option Pass an option to the runtime." |
| echo " --compact-dex-level Specify a compact dex level to the compiler." |
| echo " --debug Wait for the default debugger to attach." |
| echo " --debug-agent <agent-path>" |
| echo " Wait for the given debugger agent to attach. Currently" |
| echo " only supported on host." |
| echo " --debug-wrap-agent use libwrapagentproperties and tools/libjdwp-compat.props" |
| echo " to load the debugger agent specified by --debug-agent." |
| echo " --with-agent <agent> Run the test with the given agent loaded with -agentpath:" |
| echo " --debuggable Whether to compile Java code for a debugger." |
| echo " --gdb Run under gdb; incompatible with some tests." |
| echo " --gdbserver Start gdbserver (defaults to port :5039)." |
| echo " --gdbserver-port <port>" |
| echo " Start gdbserver with the given COMM (see man gdbserver)." |
| echo " --gdbserver-bin <binary>" |
| echo " Use the given binary as gdbserver." |
| echo " --gdb-arg Pass an option to gdb or gdbserver." |
| echo " --build-only Build test files only (off by default)." |
| echo " --interpreter Enable interpreter only mode (off by default)." |
| echo " --jit Enable jit (off by default)." |
| echo " --optimizing Enable optimizing compiler (default)." |
| echo " --no-verify Turn off verification (on by default)." |
| echo " --verify-soft-fail Force soft fail verification (off by default)." |
| echo " Verification is enabled if neither --no-verify" |
| echo " nor --verify-soft-fail is specified." |
| echo " --no-optimize Turn off optimization (on by default)." |
| echo " --no-precise Turn off precise GC (on by default)." |
| echo " --zygote Spawn the process from the Zygote." \ |
| "If used, then the" |
| echo " other runtime options are ignored." |
| echo " --no-dex2oat Run as though dex2oat was failing." |
| echo " --prebuild Run dex2oat on the files before starting test. (default)" |
| echo " --no-prebuild Do not run dex2oat on the files before starting" |
| echo " the test." |
| echo " --strip-dex Strip the dex files before starting test." |
| echo " --relocate Force the use of relocating in the test, making" |
| echo " the image and oat files be relocated to a random" |
| echo " address before running." |
| echo " --no-relocate Force the use of no relocating in the test. (default)" |
| echo " --image Run the test using a precompiled boot image. (default)" |
| echo " --no-image Run the test without a precompiled boot image." |
| echo " --host Use the host-mode virtual machine." |
| echo " --invoke-with Pass --invoke-with option to runtime." |
| echo " --dalvik Use Dalvik (off by default)." |
| echo " --jvm Use a host-local RI virtual machine." |
| echo " --use-java-home Use the JAVA_HOME environment variable" |
| echo " to find the java compiler and runtime" |
| echo " (if applicable) to run the test with." |
| echo " --output-path [path] Location where to store the build" \ |
| "files." |
| echo " --64 Run the test in 64-bit mode" |
| echo " --bionic Use the (host, 64-bit only) linux_bionic libc runtime" |
| echo " --runtime-zipapex [file]" |
| echo " Use the given zipapex file to provide runtime binaries" |
| echo " --runtime-extracted-zipapex [dir]" |
| echo " Use the given extracted zipapex directory to provide" |
| echo " runtime binaries" |
| echo " --timeout n Test timeout in seconds" |
| echo " --trace Run with method tracing" |
| echo " --strace Run with syscall tracing from strace." |
| echo " --stream Run method tracing in streaming mode (requires --trace)" |
| echo " --gcstress Run with gc stress testing" |
| echo " --gcverify Run with gc verification" |
| echo " --jvmti-trace-stress Run with jvmti method tracing stress testing" |
| echo " --jvmti-step-stress Run with jvmti single step stress testing" |
| echo " --jvmti-redefine-stress" |
| echo " Run with jvmti method redefinition stress testing" |
| echo " --always-clean Delete the test files even if the test fails." |
| echo " --never-clean Keep the test files even if the test succeeds." |
| echo " --chroot [newroot] Run with root directory set to newroot." |
| echo " --android-root [path] The path on target for the android root. (/system by default)." |
| echo " --android-i18n-root [path]" |
| echo " The path on target for the i18n module root." |
| echo " (/apex/com.android.i18n by default)." |
| echo " --android-art-root [path]" |
| echo " The path on target for the ART module root." |
| echo " (/apex/com.android.art by default)." |
| echo " --android-tzdata-root [path]" |
| echo " The path on target for the Android Time Zone Data root." |
| echo " (/apex/com.android.tzdata by default)." |
| echo " --dex2oat-swap Use a dex2oat swap file." |
| echo " --instruction-set-features [string]" |
| echo " Set instruction-set-features for compilation." |
| echo " --quiet Don't print anything except failure messages" |
| echo " --bisection-search Perform bisection bug search." |
| echo " --vdex Test using vdex as in input to dex2oat. Only works with --prebuild." |
| echo " --suspend-timeout Change thread suspend timeout ms (default 500000)." |
| echo " --dex2oat-jobs Number of dex2oat jobs." |
| ) 1>&2 # Direct to stderr so usage is not printed if --quiet is set. |
| exit 1 |
| fi |
| |
| cd "$test_dir" |
| test_dir=`pwd` |
| |
| td_info="${test_dir}/${info}" |
| td_expected="${test_dir}/${expected}" |
| |
| if [ ! -r $td_info ]; then |
| err_echo "${test_dir}: missing file $td_info" |
| exit 1 |
| fi |
| |
| if [ ! -r $td_expected ]; then |
| err_echo "${test_dir}: missing file $td_expected" |
| exit 1 |
| fi |
| |
| # copy the test to a temp dir and run it |
| |
| echo "${test_dir}: building..." 1>&2 |
| |
| rm -rf "$tmp_dir" |
| cp -LRp "$test_dir" "$tmp_dir" |
| cd "$tmp_dir" |
| |
| if [ '!' -r "$build" ]; then |
| cp "${progdir}/etc/default-build" build |
| else |
| cp "${progdir}/etc/default-build" . |
| fi |
| |
| if [ '!' -r "$run" ]; then |
| cp "${progdir}/etc/default-run" run |
| else |
| cp "${progdir}/etc/default-run" . |
| fi |
| |
| if [ '!' -r "$check_cmd" ]; then |
| cp "${progdir}/etc/default-check" check |
| else |
| cp "${progdir}/etc/default-check" . |
| fi |
| |
| chmod 755 "$build" |
| chmod 755 "$run" |
| chmod 755 "$check_cmd" |
| |
| export TEST_NAME=`basename ${test_dir}` |
| |
| # Tests named '<number>-checker-*' will also have their CFGs verified with |
| # Checker when compiled with Optimizing on host. |
| if [[ "$TEST_NAME" =~ ^[0-9]+-checker- ]]; then |
| if [ "$runtime" = "art" -a "$run_optimizing" = "true" ]; then |
| # In no-prebuild or no-image mode, the compiler only quickens so disable the checker. |
| if [ "$prebuild_mode" = "yes" -a "$have_image" = "yes" ]; then |
| run_checker="yes" |
| |
| if [ "$target_mode" = "no" ]; then |
| cfg_output_dir="$tmp_dir" |
| checker_args="--arch=${host_arch_name^^}" |
| else |
| cfg_output_dir="$DEX_LOCATION" |
| checker_args="--arch=${target_arch_name^^}" |
| fi |
| |
| if [ "$debuggable" = "yes" ]; then |
| checker_args="$checker_args --debuggable" |
| fi |
| |
| run_args+=(-Xcompiler-option "--dump-cfg=$cfg_output_dir/$cfg_output" -Xcompiler-option -j1) |
| fi |
| fi |
| fi |
| |
| run_args+=(--testlib "${testlib}") |
| |
| if ! ulimit -f ${file_ulimit}; then |
| err_echo "ulimit file size setting failed" |
| fi |
| |
| # Tell the build script which mode (target, host, jvm) we are building for |
| # to determine the bootclasspath at build time. |
| if [[ "$target_mode" == "yes" ]]; then |
| build_args="$build_args --target" |
| else |
| if [[ $runtime == "jvm" ]]; then |
| build_args="$build_args --jvm" |
| else |
| build_args="$build_args --host" |
| fi |
| fi |
| |
| if [[ "$dev_mode" == "yes" ]]; then |
| build_args="$build_args --dev" |
| fi |
| |
| good="no" |
| good_build="yes" |
| good_run="yes" |
| export TEST_RUNTIME="${runtime}" |
| if [ "$dev_mode" = "yes" ]; then |
| "./${build}" $build_args 2>&1 |
| build_exit="$?" |
| echo "build exit status: $build_exit" 1>&2 |
| if [ "$build_exit" = '0' ]; then |
| echo "${test_dir}: running..." 1>&2 |
| "./${run}" "${run_args[@]}" "$@" 2>&1 |
| run_exit="$?" |
| |
| if [ "$run_exit" = "0" ]; then |
| if [ "$run_checker" = "yes" ]; then |
| if [ "$target_mode" = "yes" ]; then |
| adb pull "$chroot/$cfg_output_dir/$cfg_output" &> /dev/null |
| fi |
| "$checker" $checker_args "$cfg_output" "$tmp_dir" 2>&1 |
| checker_exit="$?" |
| if [ "$checker_exit" = "0" ]; then |
| good="yes" |
| fi |
| err_echo "checker exit status: $checker_exit" |
| else |
| good="yes" |
| fi |
| fi |
| echo "run exit status: $run_exit" 1>&2 |
| fi |
| elif [ "$update_mode" = "yes" ]; then |
| "./${build}" $build_args >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" = '0' ]; then |
| echo "${test_dir}: running..." 1>&2 |
| "./${run}" "${run_args[@]}" "$@" >"$output" 2>&1 |
| if [ "$run_checker" = "yes" ]; then |
| if [ "$target_mode" = "yes" ]; then |
| adb pull "$chroot/$cfg_output_dir/$cfg_output" &> /dev/null |
| fi |
| "$checker" -q $checker_args "$cfg_output" "$tmp_dir" >> "$output" 2>&1 |
| fi |
| sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}" |
| good="yes" |
| else |
| cat "$build_output" 1>&${real_stderr} 1>&2 |
| err_echo "build exit status: $build_exit" |
| fi |
| elif [ "$build_only" = "yes" ]; then |
| good="yes" |
| "./${build}" $build_args >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" '!=' '0' ]; then |
| cp "$build_output" "$output" |
| echo "build exit status: $build_exit" >>"$output" |
| diff --strip-trailing-cr -q "$expected" "$output" >/dev/null |
| if [ "$?" '!=' "0" ]; then |
| good="no" |
| err_echo "BUILD FAILED For ${TEST_NAME}" |
| fi |
| fi |
| # Clean up extraneous files that are not used by tests. |
| find $tmp_dir -mindepth 1 ! -regex ".*/\(.*jar\|$output\|$expected\)" | xargs rm -rf |
| exit 0 |
| else |
| "./${build}" $build_args >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" = '0' ]; then |
| echo "${test_dir}: running..." 1>&2 |
| "./${run}" "${run_args[@]}" "$@" >"$output" 2>&1 |
| run_exit="$?" |
| if [ "$run_exit" != "0" ]; then |
| err_echo "run exit status: $run_exit" |
| good_run="no" |
| elif [ "$run_checker" = "yes" ]; then |
| if [ "$target_mode" = "yes" ]; then |
| adb pull "$chroot/$cfg_output_dir/$cfg_output" &> /dev/null |
| fi |
| "$checker" -q $checker_args "$cfg_output" "$tmp_dir" >> "$output" 2>&1 |
| checker_exit="$?" |
| if [ "$checker_exit" != "0" ]; then |
| err_echo "checker exit status: $checker_exit" |
| good_run="no" |
| else |
| good_run="yes" |
| fi |
| else |
| good_run="yes" |
| fi |
| else |
| good_build="no" |
| cp "$build_output" "$output" |
| echo "Failed to build in tmpdir=${tmp_dir} from oldwd=${oldwd} and cwd=`pwd`" >> "$output" |
| echo "Non-canonical tmpdir was ${noncanonical_tmp_dir}" >> "$output" |
| echo "Args: ${args}" >> "$output" |
| echo "build exit status: $build_exit" >> "$output" |
| max_name_length=$(getconf NAME_MAX ${tmp_dir}) |
| echo "Max filename (NAME_MAX): ${max_name_length}" >> "$output" |
| max_path_length=$(getconf PATH_MAX ${tmp_dir}) |
| echo "Max pathlength (PATH_MAX): ${max_path_length}" >> "$output" |
| fi |
| ./$check_cmd "$expected" "$output" |
| if [ "$?" = "0" ]; then |
| if [ "$good_build" = "no" -o "$good_run" = "yes" ]; then |
| # output == expected |
| good="yes" |
| echo "${test_dir}: succeeded!" 1>&2 |
| fi |
| fi |
| fi |
| |
| ( |
| if [ "$good" != "yes" -a "$update_mode" != "yes" ]; then |
| echo "${test_dir}: FAILED!" |
| echo ' ' |
| echo '#################### info' |
| cat "${td_info}" | sed 's/^/# /g' |
| echo '#################### diffs' |
| if [ "$run_checker" == "yes" ]; then |
| # Checker failures dump the whole CFG, so we output the whole diff. |
| diff --strip-trailing-cr -u "$expected" "$output" |
| else |
| diff --strip-trailing-cr -u "$expected" "$output" | tail -n 10000 |
| fi |
| echo '####################' |
| if [ "$strace" = "yes" ]; then |
| echo '#################### strace output' |
| tail -n 3000 "$tmp_dir/$strace_output" |
| echo '####################' |
| fi |
| if [ "x$target_mode" = "xno" -a "x$SANITIZE_HOST" = "xaddress" ]; then |
| # Run the stack script to symbolize any ASAN aborts on the host for SANITIZE_HOST. The |
| # tools used by the given ABI work for both x86 and x86-64. |
| echo "ABI: 'x86_64'" | cat - "$output" | $ANDROID_BUILD_TOP/development/scripts/stack | tail -n 3000 |
| fi |
| echo ' ' |
| fi |
| |
| ) 2>&${real_stderr} 1>&2 |
| |
| # Attempt bisection only if the test failed. |
| # TODO: Implement support for chroot-based bisection search. |
| if [ "$bisection_search" = "yes" -a "$good" != "yes" ]; then |
| # Bisecting works by skipping different optimization passes which breaks checker assertions. |
| if [ "$run_checker" == "yes" ]; then |
| echo "${test_dir}: not bisecting, checker test." 1>&2 |
| else |
| # Increase file size limit, bisection search can generate large logfiles. |
| echo "${test_dir}: bisecting..." 1>&2 |
| cwd=`pwd` |
| maybe_device_mode="" |
| raw_cmd="" |
| if [ "$target_mode" = "yes" ]; then |
| # Produce cmdline.sh in $chroot_dex_location. "$@" is passed as a runtime option |
| # so that cmdline.sh forwards its arguments to dalvikvm. invoke-with is set |
| # to exec in order to preserve pid when calling dalvikvm. This is required |
| # for bisection search to correctly retrieve logs from device. |
| "./${run}" "${run_args[@]}" --runtime-option '"$@"' --invoke-with exec --dry-run "$@" &> /dev/null |
| adb shell chmod u+x "$chroot_dex_location/cmdline.sh" |
| maybe_device_mode="--device" |
| raw_cmd="$DEX_LOCATION/cmdline.sh" |
| else |
| raw_cmd="$cwd/${run} --external-log-tags "${run_args[@]}" $@" |
| fi |
| # TODO: Pass a `--chroot` option to the bisection_search.py script and use it there. |
| $ANDROID_BUILD_TOP/art/tools/bisection_search/bisection_search.py \ |
| $maybe_device_mode \ |
| --raw-cmd="$raw_cmd" \ |
| --check-script="$cwd/check" \ |
| --expected-output="$cwd/expected.txt" \ |
| --logfile="$cwd/bisection_log.txt" \ |
| --timeout=${timeout:-300} |
| fi |
| fi |
| |
| # Clean up test files. |
| if [ "$always_clean" = "yes" -o "$good" = "yes" ] && [ "$never_clean" = "no" ]; then |
| cd "$oldwd" |
| rm -rf "$tmp_dir" |
| if [ "$target_mode" = "yes" -a "$build_exit" = "0" ]; then |
| adb shell rm -rf $chroot_dex_location |
| fi |
| if [ "$good" = "yes" ]; then |
| exit 0 |
| fi |
| fi |
| |
| |
| ( |
| if [ "$always_clean" = "yes" ]; then |
| echo "${TEST_NAME} files deleted from host " |
| if [ "$target_mode" == "yes" ]; then |
| echo "and from target" |
| fi |
| else |
| echo "${TEST_NAME} files left in ${tmp_dir} on host" |
| if [ "$target_mode" == "yes" ]; then |
| echo "and in ${chroot_dex_location} on target" |
| fi |
| fi |
| |
| ) 2>&${real_stderr} 1>&2 |
| |
| if [ "$never_clean" = "yes" ] && [ "$good" = "yes" ]; then |
| exit 0 |
| else |
| exit 1 |
| fi |