tools/buildbot-sync.sh - SHIFTPHONES/android_art - Gitiles

 #! /bin/bash
 #
 # Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # Push ART artifacts and its dependencies to a chroot directory for on-device testing.

 if [ -t 1 ]; then
   # Color sequences if terminal is a tty.
   red='\033[0;31m'
   green='\033[0;32m'
   yellow='\033[0;33m'
   magenta='\033[0;35m'
   nc='\033[0m'
 fi

 adb wait-for-device

 if [[ -z "$ANDROID_BUILD_TOP" ]]; then
   echo 'ANDROID_BUILD_TOP environment variable is empty; did you forget to run `lunch`?'
   exit 1
 fi

 if [[ -z "$ANDROID_PRODUCT_OUT" ]]; then
   echo 'ANDROID_PRODUCT_OUT environment variable is empty; did you forget to run `lunch`?'
   exit 1
 fi

 if [[ -z "$ART_TEST_CHROOT" ]]; then
   echo 'ART_TEST_CHROOT environment variable is empty; please set it before running this script.'
   exit 1
 fi

 if [[ "$(build/soong/soong_ui.bash --dumpvar-mode TARGET_FLATTEN_APEX)" != "true" ]]; then
   echo -e "${red}This script only works when  APEX packages are flattened, but the build" \
     "configuration is set up to use non-flattened APEX packages.${nc}"
   echo -e "${magenta}You can force APEX flattening by setting the environment variable" \
     "\`OVERRIDE_TARGET_FLATTEN_APEX\` to \"true\" before starting the build and running this" \
     "script.${nc}"
   exit 1
 fi

 # Linker configuration.
 # ---------------------

 # Adjust the chroot environment to have it use the system linker configuration
 # of the built target ("guest system"), located in `/system/etc` under the
 # chroot directory, even if the linker configuration flavor of the "guest
 # system" (e.g. legacy configuration) does not match the one of the "host
 # system" (e.g. full-VNDK configuration). This is done by renaming the
 # configuration file provided by the "guest system" (created according to the
 # build target configuration) within the chroot environment, using the name of
 # the configuration file expected by the linker (governed by system properties
 # of the "host system").

 # Default linker configuration file name/stem.
 ld_config_file_path="/system/etc/ld.config.txt";
 # VNDK-lite linker configuration file name.
 ld_config_vndk_lite_file_path="/system/etc/ld.config.vndk_lite.txt";

 # Find linker configuration path name on the "host system".
 #
 # The logic here partly replicates (and simplifies) Bionic's linker logic around
 # configuration file search (see `get_ld_config_file_path` in
 # bionic/linker/linker.cpp).
 get_ld_host_system_config_file_path() {
   # Check whether the "host device" uses a VNDK-lite linker configuration.
   local vndk_lite=$(adb shell getprop "ro.vndk.lite" false)
   if [[ "$vndk_lite" = true ]]; then
     if adb shell test -f "$ld_config_vndk_lite_file_path"; then
       echo "$ld_config_vndk_lite_file_path"
       return
     fi
   fi
   # Check the "host device"'s VNDK version, if any.
   local vndk_version=$(adb shell getprop "ro.vndk.version")
   if [[ -n "$vndk_version" ]] && [[ "$vndk_version" != current ]]; then
     # Insert the VNDK version after the last period (and add another period).
     local ld_config_file_vdnk_path=$(echo "$ld_config_file_path" \
       | sed -e "s/^\\(.*\\)\\.\\([^.]\\)/\\1.${vndk_version}.\\2/")
     if adb shell test -f "$ld_config_file_vdnk_path"; then
       echo "$ld_config_file_vdnk_path"
       return
     fi
   else
     if adb shell test -f "$ld_config_file_path"; then
       echo "$ld_config_file_path"
       return
     fi
   fi
   # If all else fails, return the default linker configuration name.
   echo -e "${yellow}Cannot find linker configuration; using default path name:" \
     "\`$ld_config_file_path\`${nc}" >&2
   echo "$ld_config_file_path"
   return
 }

 # Find linker configuration path name on the "guest system".
 #
 # The logic here tries to "guess" the name of the linker configuration file,
 # based on the contents of the build directory.
 get_ld_guest_system_config_file_path() {
   if [[ -z "$ANDROID_PRODUCT_OUT" ]]; then
     echo -e "${red}ANDROID_PRODUCT_OUT environment variable is empty;" \
       "did you forget to run \`lunch\`${nc}?" >&2
     exit 1
   fi
   local ld_config_file_location="$ANDROID_PRODUCT_OUT/system/etc"
   local ld_config_file_paths=$(find "$ld_config_file_location" -name "ld.*.txt")
   local ld_config_file_path_number=$(wc -l <<< "$ld_config_file_paths")
   if [[ "$ld_config_file_path_number" -eq 0 ]]; then
     echo -e "${red}No linker configuration file found in \`$ld_config_file_location\`${nc}" >&2
     exit 1
   fi
   if [[ "$ld_config_file_path_number" -gt 1 ]]; then
     echo -e \
       "${red}More than one linker configuration file found in \`$ld_config_file_location\`:" \
       "\n${ld_config_file_paths}${nc}" >&2
     exit 1
   fi
   # Strip the build prefix to make the path name relative to the "guest root directory".
   sed -e "s|^$ANDROID_PRODUCT_OUT||" <<< "$ld_config_file_paths"
 }


 # Synchronization recipe.
 # -----------------------

 # Sync the system directory to the chroot.
 echo -e "${green}Syncing system directory...${nc}"
 adb shell mkdir -p "$ART_TEST_CHROOT/system"
 adb push "$ANDROID_PRODUCT_OUT/system" "$ART_TEST_CHROOT/"
 # Overwrite the default public.libraries.txt file with a smaller one that
 # contains only the public libraries pushed to the chroot directory.
 adb push "$ANDROID_BUILD_TOP/art/tools/public.libraries.buildbot.txt" \
   "$ART_TEST_CHROOT/system/etc/public.libraries.txt"

 # Manually "activate" the flattened APEX $1 by syncing it to /apex/$2 in the
 # chroot. $2 defaults to $1.
 #
 # TODO: Handle the case of build targets using non-flatted APEX packages.
 # As a workaround, one can run `export OVERRIDE_TARGET_FLATTEN_APEX=true` before building
 # a target to have its APEX packages flattened.
 activate_apex() {
   local src_apex=${1}
   local dst_apex=${2:-${src_apex}}
   echo -e "${green}Activating APEX ${src_apex} as ${dst_apex}...${nc}"
   # We copy the files from `/system/apex/${src_apex}` to `/apex/${dst_apex}` in
   # the chroot directory, instead of simply using a symlink, as Bionic's linker
   # relies on the real path name of a binary (e.g.
   # `/apex/com.android.art/bin/dex2oat`) to select the linker configuration.
   adb shell mkdir -p "$ART_TEST_CHROOT/apex"
   adb shell rm -rf "$ART_TEST_CHROOT/apex/${dst_apex}"
   adb shell cp -a "$ART_TEST_CHROOT/system/apex/${src_apex}" "$ART_TEST_CHROOT/apex/${dst_apex}" \
     || exit 1
 }

 # "Activate" the required APEX modules.
 activate_apex com.android.art.testing com.android.art
 activate_apex com.android.i18n
 activate_apex com.android.runtime
 activate_apex com.android.tzdata

 # Adjust the linker configuration file (if needed).
 #
 # Check the linker configurations files on the "host system" and the "guest
 # system". If these file names are different, rename the "guest system" linker
 # configuration file within the chroot environment using the "host system"
 # linker configuration file name.
 ld_host_system_config_file_path=$(get_ld_host_system_config_file_path) || exit 1
 echo -e "${green}Determining host system linker configuration:" \
   "\`$ld_host_system_config_file_path\`${nc}"
 ld_guest_system_config_file_path=$(get_ld_guest_system_config_file_path) || exit 1
 echo -e "${green}Determining guest system linker configuration:" \
   "\`$ld_guest_system_config_file_path\`${nc}"
 if [[ "$ld_host_system_config_file_path" != "$ld_guest_system_config_file_path" ]]; then
   echo -e "${green}Renaming linker configuration file in chroot environment:" \
     "\`$ART_TEST_CHROOT$ld_guest_system_config_file_path\`" \
     "-> \`$ART_TEST_CHROOT$ld_host_system_config_file_path\`${nc}"
   adb shell mv -f "$ART_TEST_CHROOT$ld_guest_system_config_file_path" \
       "$ART_TEST_CHROOT$ld_host_system_config_file_path"
 fi

 # Sync the data directory to the chroot.
 echo -e "${green}Syncing data directory...${nc}"
 adb shell mkdir -p "$ART_TEST_CHROOT/data"
 adb push "$ANDROID_PRODUCT_OUT/data" "$ART_TEST_CHROOT/"
	#! /bin/bash
	#
	# Copyright (C) 2018 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# Push ART artifacts and its dependencies to a chroot directory for on-device testing.

	if [ -t 1 ]; then
	# Color sequences if terminal is a tty.
	red='\033[0;31m'
	green='\033[0;32m'
	yellow='\033[0;33m'
	magenta='\033[0;35m'
	nc='\033[0m'
	fi

	adb wait-for-device

	if [[ -z "$ANDROID_BUILD_TOP" ]]; then
	echo 'ANDROID_BUILD_TOP environment variable is empty; did you forget to run `lunch`?'
	exit 1
	fi

	if [[ -z "$ANDROID_PRODUCT_OUT" ]]; then
	echo 'ANDROID_PRODUCT_OUT environment variable is empty; did you forget to run `lunch`?'
	exit 1
	fi

	if [[ -z "$ART_TEST_CHROOT" ]]; then
	echo 'ART_TEST_CHROOT environment variable is empty; please set it before running this script.'
	exit 1
	fi

	if [[ "$(build/soong/soong_ui.bash --dumpvar-mode TARGET_FLATTEN_APEX)" != "true" ]]; then
	echo -e "${red}This script only works when APEX packages are flattened, but the build" \
	"configuration is set up to use non-flattened APEX packages.${nc}"
	echo -e "${magenta}You can force APEX flattening by setting the environment variable" \
	"\`OVERRIDE_TARGET_FLATTEN_APEX\` to \"true\" before starting the build and running this" \
	"script.${nc}"
	exit 1
	fi

	# Linker configuration.
	# ---------------------

	# Adjust the chroot environment to have it use the system linker configuration
	# of the built target ("guest system"), located in `/system/etc` under the
	# chroot directory, even if the linker configuration flavor of the "guest
	# system" (e.g. legacy configuration) does not match the one of the "host
	# system" (e.g. full-VNDK configuration). This is done by renaming the
	# configuration file provided by the "guest system" (created according to the
	# build target configuration) within the chroot environment, using the name of
	# the configuration file expected by the linker (governed by system properties
	# of the "host system").

	# Default linker configuration file name/stem.
	ld_config_file_path="/system/etc/ld.config.txt";
	# VNDK-lite linker configuration file name.
	ld_config_vndk_lite_file_path="/system/etc/ld.config.vndk_lite.txt";

	# Find linker configuration path name on the "host system".
	#
	# The logic here partly replicates (and simplifies) Bionic's linker logic around
	# configuration file search (see `get_ld_config_file_path` in
	# bionic/linker/linker.cpp).
	get_ld_host_system_config_file_path() {
	# Check whether the "host device" uses a VNDK-lite linker configuration.
	local vndk_lite=$(adb shell getprop "ro.vndk.lite" false)
	if [[ "$vndk_lite" = true ]]; then
	if adb shell test -f "$ld_config_vndk_lite_file_path"; then
	echo "$ld_config_vndk_lite_file_path"
	return
	fi
	fi
	# Check the "host device"'s VNDK version, if any.
	local vndk_version=$(adb shell getprop "ro.vndk.version")
	if [[ -n "$vndk_version" ]] && [[ "$vndk_version" != current ]]; then
	# Insert the VNDK version after the last period (and add another period).
	local ld_config_file_vdnk_path=$(echo "$ld_config_file_path" \
	\| sed -e "s/^\\(.*\\)\\.\\([^.]\\)/\\1.${vndk_version}.\\2/")
	if adb shell test -f "$ld_config_file_vdnk_path"; then
	echo "$ld_config_file_vdnk_path"
	return
	fi
	else
	if adb shell test -f "$ld_config_file_path"; then
	echo "$ld_config_file_path"
	return
	fi
	fi
	# If all else fails, return the default linker configuration name.
	echo -e "${yellow}Cannot find linker configuration; using default path name:" \
	"\`$ld_config_file_path\`${nc}" >&2
	echo "$ld_config_file_path"
	return
	}

	# Find linker configuration path name on the "guest system".
	#
	# The logic here tries to "guess" the name of the linker configuration file,
	# based on the contents of the build directory.
	get_ld_guest_system_config_file_path() {
	if [[ -z "$ANDROID_PRODUCT_OUT" ]]; then
	echo -e "${red}ANDROID_PRODUCT_OUT environment variable is empty;" \
	"did you forget to run \`lunch\`${nc}?" >&2
	exit 1
	fi
	local ld_config_file_location="$ANDROID_PRODUCT_OUT/system/etc"
	local ld_config_file_paths=$(find "$ld_config_file_location" -name "ld.*.txt")
	local ld_config_file_path_number=$(wc -l <<< "$ld_config_file_paths")
	if [[ "$ld_config_file_path_number" -eq 0 ]]; then
	echo -e "${red}No linker configuration file found in \`$ld_config_file_location\`${nc}" >&2
	exit 1
	fi
	if [[ "$ld_config_file_path_number" -gt 1 ]]; then
	echo -e \
	"${red}More than one linker configuration file found in \`$ld_config_file_location\`:" \
	"\n${ld_config_file_paths}${nc}" >&2
	exit 1
	fi
	# Strip the build prefix to make the path name relative to the "guest root directory".
	sed -e "s\|^$ANDROID_PRODUCT_OUT\|\|" <<< "$ld_config_file_paths"
	}


	# Synchronization recipe.
	# -----------------------

	# Sync the system directory to the chroot.
	echo -e "${green}Syncing system directory...${nc}"
	adb shell mkdir -p "$ART_TEST_CHROOT/system"
	adb push "$ANDROID_PRODUCT_OUT/system" "$ART_TEST_CHROOT/"
	# Overwrite the default public.libraries.txt file with a smaller one that
	# contains only the public libraries pushed to the chroot directory.
	adb push "$ANDROID_BUILD_TOP/art/tools/public.libraries.buildbot.txt" \
	"$ART_TEST_CHROOT/system/etc/public.libraries.txt"

	# Manually "activate" the flattened APEX $1 by syncing it to /apex/$2 in the
	# chroot. $2 defaults to $1.
	#
	# TODO: Handle the case of build targets using non-flatted APEX packages.
	# As a workaround, one can run `export OVERRIDE_TARGET_FLATTEN_APEX=true` before building
	# a target to have its APEX packages flattened.
	activate_apex() {
	local src_apex=${1}
	local dst_apex=${2:-${src_apex}}
	echo -e "${green}Activating APEX ${src_apex} as ${dst_apex}...${nc}"
	# We copy the files from `/system/apex/${src_apex}` to `/apex/${dst_apex}` in
	# the chroot directory, instead of simply using a symlink, as Bionic's linker
	# relies on the real path name of a binary (e.g.
	# `/apex/com.android.art/bin/dex2oat`) to select the linker configuration.
	adb shell mkdir -p "$ART_TEST_CHROOT/apex"
	adb shell rm -rf "$ART_TEST_CHROOT/apex/${dst_apex}"
	adb shell cp -a "$ART_TEST_CHROOT/system/apex/${src_apex}" "$ART_TEST_CHROOT/apex/${dst_apex}" \
	\|\| exit 1
	}

	# "Activate" the required APEX modules.
	activate_apex com.android.art.testing com.android.art
	activate_apex com.android.i18n
	activate_apex com.android.runtime
	activate_apex com.android.tzdata

	# Adjust the linker configuration file (if needed).
	#
	# Check the linker configurations files on the "host system" and the "guest
	# system". If these file names are different, rename the "guest system" linker
	# configuration file within the chroot environment using the "host system"
	# linker configuration file name.
	ld_host_system_config_file_path=$(get_ld_host_system_config_file_path) \|\| exit 1
	echo -e "${green}Determining host system linker configuration:" \
	"\`$ld_host_system_config_file_path\`${nc}"
	ld_guest_system_config_file_path=$(get_ld_guest_system_config_file_path) \|\| exit 1
	echo -e "${green}Determining guest system linker configuration:" \
	"\`$ld_guest_system_config_file_path\`${nc}"
	if [[ "$ld_host_system_config_file_path" != "$ld_guest_system_config_file_path" ]]; then
	echo -e "${green}Renaming linker configuration file in chroot environment:" \
	"\`$ART_TEST_CHROOT$ld_guest_system_config_file_path\`" \
	"-> \`$ART_TEST_CHROOT$ld_host_system_config_file_path\`${nc}"
	adb shell mv -f "$ART_TEST_CHROOT$ld_guest_system_config_file_path" \
	"$ART_TEST_CHROOT$ld_host_system_config_file_path"
	fi

	# Sync the data directory to the chroot.
	echo -e "${green}Syncing data directory...${nc}"
	adb shell mkdir -p "$ART_TEST_CHROOT/data"
	adb push "$ANDROID_PRODUCT_OUT/data" "$ART_TEST_CHROOT/"