| oliviermartin | 803f94e | 2011-07-06 18:25:47 +0000 | [diff] [blame] | 1 | On Ubuntu 10.04, in your $(WORKROOT) directory (eg: ~/dev/)
|
| AJFISH | 2ef2b01 | 2009-12-06 01:57:05 +0000 | [diff] [blame] | 2 |
|
| oliviermartin | 803f94e | 2011-07-06 18:25:47 +0000 | [diff] [blame] | 3 | Build UEFI for the BeagleBoard :
|
| 4 | ================================
|
| 5 | # Requirements
|
| 6 | sudo apt-get install uuid-dev
|
| AJFISH | 2ef2b01 | 2009-12-06 01:57:05 +0000 | [diff] [blame] | 7 |
|
| oliviermartin | 803f94e | 2011-07-06 18:25:47 +0000 | [diff] [blame] | 8 | # Get the arm-none-eabi Toolchain:
|
| 9 | cd $(WORKROOT)
|
| 10 | wget http://www.codesourcery.com/sgpp/lite/arm/portal/package7813/public/arm-none-eabi/arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
|
| 11 | tar xjf arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
|
| 12 | Add the arm-none-eabi toolchain to your path
|
| 13 |
|
| 14 | # Build UEFI
|
| 15 | svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest
|
| 16 | cd $(WORKROOT)/edk2
|
| 17 | svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest
|
| 18 | patch -p1 < ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch
|
| 19 | cd BeagleBoardPkg/
|
| 20 | ./build.sh
|
| 21 |
|
| 22 | # To Build a Release verion of UEFI
|
| 23 | ./build.sh RELEASE
|
| 24 |
|
| 25 |
|
| 26 | Test UEFI on qEmu :
|
| 27 | ===================
|
| 28 |
|
| 29 | Installing Linaro qEmu:
|
| 30 | -----------------------
|
| 31 | cd $(WORKROOT)
|
| 32 | git clone git://git.linaro.org/qemu/qemu-linaro.git
|
| 33 | cd $(WORKROOT)/qemu-linaro
|
| 34 | ./configure --target-list=arm-softmmu,arm-linux-user,armeb-linux-user
|
| 35 | make
|
| 36 |
|
| 37 | Installing Linaro image Creator:
|
| 38 | --------------------------------
|
| 39 | wget http://launchpad.net/linaro-image-tools/trunk/0.4.8/+download/linaro-image-tools-0.4.8.tar.gz
|
| 40 | tar xzf linaro-image-tools-0.4.8.tar.gz
|
| 41 | cd $(WORKROOT)/linaro-image-tools-0.4.8/
|
| 42 | sudo apt-get install parted dosfstools uboot-mkimage python-argparse python-dbus python-debian python-parted qemu-arm-static btrfs-tools command-not-found
|
| 43 |
|
| 44 | Creating u-boot + Linux Linaro image:
|
| 45 | -------------------------------------
|
| 46 | mkdir $(WORKROOT)/beagle_image && cd $(WORKROOT)/beagle_image
|
| 47 | wget http://releases.linaro.org/platform/linaro-m/hwpacks/final/hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz
|
| 48 | wget http://releases.linaro.org/platform/linaro-m/headless/release-candidate/linaro-m-headless-tar-20101101-0.tar.gz
|
| 49 | sudo $(WORKROOT)/linaro-image-tools-0.4.8/linaro-media-create --image_file beagle_sd.img --dev beagle --binary linaro-m-headless-tar-20101101-0.tar.gz --hwpack hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz
|
| 50 | sudo chmod a+rw beagle_sd.img
|
| 51 |
|
| 52 | Test u-boot + Linux Linaro image on qEmu:
|
| 53 | -----------------------------------------
|
| 54 | $(WORKROOT)/qemu-linaro/arm-softmmu/qemu-system-arm -M beagle -sd $(WORKROOT)/beagle_image/beagle_sd.img -serial stdio -clock unix
|
| 55 | # in u-boot:
|
| 56 | boot
|
| 57 |
|
| 58 | Start UEFI from NOR Flash :
|
| 59 | ---------------------------
|
| 60 | # Adding zImage to beagle_sd.img
|
| 61 | mkdir /tmp/beagle_img1
|
| 62 | sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1
|
| 63 | cp zImage /tmp/beagle_img1
|
| 64 | sudo umount /tmp/beagle_img1
|
| 65 |
|
| 66 | ./qemu-system-arm -M beagle -mtdblock /work/tianocore/Build/BeagleBoard/DEBUG_ARMGCC/FV/BeagleBoard_EFI_flashboot.fd -serial stdio -sd /work/linaro-image-tools-0.4.8/beagle_sd.img
|
| 67 |
|
| 68 | Start UEFI from SD card :
|
| 69 | -------------------------
|
| 70 | # To replace u-boot by uefi in the SD card
|
| 71 | 1) Build the BeagleBoard UEFI firmware without the OMAP353x header
|
| 72 | cd $(WORKROOT)/edk2/BeagleBoardPkg/
|
| 73 | ./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1
|
| 74 |
|
| 75 | 2) Replace u-boot by UEFI
|
| 76 | sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1
|
| 77 | sudo cp ../Build/BeagleBoard/DEBUG_ARMGCC/FV/BEAGLEBOARD_EFI.fd /tmp/beagle_img1/u-boot.bin
|
| 78 | sudo umount /tmp/beagle_img1
|