| === OVMF OVERVIEW === | |
| The Open Virtual Machine Firmware (OVMF) project aims | |
| to support firmware for Virtual Machines using the edk2 | |
| code base. More information can be found at: | |
| http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=OVMF | |
| === STATUS === | |
| Current capabilities: | |
| * IA32 and X64 architectures | |
| * QEMU (0.10.0 or later) | |
| - Video, keyboard, IDE, CD-ROM, serial | |
| - Runs UEFI shell | |
| - Optional NIC support. Requires QEMU (0.12.2 or later) | |
| * UEFI Linux boots | |
| * UEFI Windows 8 boots | |
| * UEFI Windows 7 & Windows 2008 Server boot (see important notes below!) | |
| === FUTURE PLANS === | |
| * Test/Stabilize UEFI Self-Certification Tests (SCT) results | |
| === BUILDING OVMF === | |
| Pre-requisites: | |
| * Build environment capable of build the edk2 MdeModulePkg. | |
| * A properly configured ASL compiler: | |
| - Intel ASL compiler: Available from http://www.acpica.org | |
| - Microsoft ASL compiler: Available from http://www.acpi.info | |
| Update Conf/target.txt ACTIVE_PLATFORM for OVMF: | |
| PEI arch DXE arch UEFI interfaces | |
| * OvmfPkg/OvmfPkgIa32.dsc IA32 IA32 IA32 | |
| * OvmfPkg/OvmfPkgIa32X64.dsc IA32 X64 X64 | |
| * OvmfPkg/OvmfPkgX64.dsc X64 X64 X64 | |
| Update Conf/target.txt TARGET_ARCH based on the .dsc file: | |
| TARGET_ARCH | |
| * OvmfPkg/OvmfPkgIa32.dsc IA32 | |
| * OvmfPkg/OvmfPkgIa32X64.dsc IA32 X64 | |
| * OvmfPkg/OvmfPkgX64.dsc X64 | |
| Following the edk2 build process, you will find the OVMF binaries | |
| under the $WORKSPACE/Build/*/*/FV directory. The actual path will | |
| depend on how your build is configured. You can expect to find | |
| these binary outputs: | |
| * OVMF.FD | |
| - Please note! This filename has changed. Older releases used OVMF.Fv. | |
| * OvmfVideo.rom | |
| - This file is not built separately any longer, starting with svn r13520. | |
| More information on building OVMF can be found at: | |
| http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=How_to_build_OVMF | |
| === RUNNING OVMF on QEMU === | |
| * QEMU 0.12.2 or later is required. | |
| * Be sure to use qemu-system-x86_64, if you are using and X64 firmware. | |
| (qemu-system-x86_64 works for the IA32 firmware as well, of course.) | |
| * Use OVMF for QEMU firmware (3 options available) | |
| - Option 1: QEMU 1.6 or newer; Use QEMU -pflash parameter | |
| * QEMU/OVMF will use emulated flash, and fully support UEFI variables | |
| * Run qemu with: -pflash path/to/OVMF.fd | |
| - Option 2: Use QEMU -bios parameter | |
| * Note that UEFI variables will be partially emulated, and non-volatile | |
| variables may lose their contents after a reboot | |
| * Run qemu with: -bios path/to/OVMF.fd | |
| - Option 3: Use QEMU -L parameter | |
| * Note that UEFI variables will be partially emulated, and non-volatile | |
| variables may lose their contents after a reboot | |
| * Either copy, rename or symlink OVMF.fd => bios.bin | |
| * Use the QEMU -L parameter to specify the directory where the bios.bin | |
| file is located. | |
| * The EFI shell is built into OVMF builds at this time, so it should | |
| run automatically if a UEFI boot application is not found on the | |
| removable media. | |
| * On Linux, newer version of QEMU may enable KVM feature, and this might | |
| cause OVMF to fail to boot. The QEMU '-no-kvm' may allow OVMF to boot. | |
| * Capturing OVMF debug messages on qemu: | |
| - The default OVMF build writes debug messages to IO port 0x402. The | |
| following qemu command line options save them in the file called | |
| debug.log: '-debugcon file:debug.log -global isa-debugcon.iobase=0x402'. | |
| - It is possible to revert to the original behavior, when debug messages were | |
| written to the emulated serial port (potentially intermixing OVMF debug | |
| output with UEFI serial console output). For this the | |
| '-D DEBUG_ON_SERIAL_PORT' option has to be passed to the build command (see | |
| the next section), and in order to capture the serial output qemu needs to | |
| be started with eg. '-serial file:serial.log'. | |
| - Debug messages fall into several categories. Logged vs. suppressed | |
| categories are controlled at OVMF build time by the | |
| 'gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel' bitmask (an UINT32 | |
| value) in the selected .dsc file. Individual bits of this bitmask are | |
| defined in <MdePkg/Include/Library/DebugLib.h>. One non-default bit (with | |
| some performance impact) that is frequently set for debugging is 0x00400000 | |
| (DEBUG_VERBOSE). | |
| - The RELEASE build target ('-b RELEASE' build option, see below) disables | |
| all debug messages. The default build target is DEBUG. | |
| === Build Scripts === | |
| On systems with the bash shell you can use OvmfPkg/build.sh to simplify | |
| building and running OVMF. | |
| So, for example, to build + run OVMF X64: | |
| $ OvmfPkg/build.sh -a X64 | |
| $ OvmfPkg/build.sh -a X64 qemu | |
| And to run a 64-bit UEFI bootable ISO image: | |
| $ OvmfPkg/build.sh -a X64 qemu -cdrom /path/to/disk-image.iso | |
| To build a 32-bit OVMF without debug messages using GCC 4.5: | |
| $ OvmfPkg/build.sh -a IA32 -b RELEASE -t GCC45 | |
| === Network Support === | |
| OVMF provides a UEFI network stack by default. Its lowest level driver is the | |
| NIC driver, higher levels are generic. In order to make DHCP, PXE Boot, and eg. | |
| socket test utilities from the StdLib edk2 package work, (1) qemu has to be | |
| configured to emulate a NIC, (2) a matching UEFI NIC driver must be available | |
| when OVMF boots. | |
| (If a NIC is configured for the virtual machine, and -- dependent on boot order | |
| -- PXE booting is attempted, but no DHCP server responds to OVMF's DHCP | |
| DISCOVER message at startup, the boot process may take approx. 3 seconds | |
| longer.) | |
| * For each NIC emulated by qemu, a GPLv2 licensed UEFI driver is available from | |
| the iPXE project. The qemu source distribution, starting with version 1.5, | |
| contains prebuilt binaries of these drivers (and of course allows one to | |
| rebuild them from source as well). This is the recommended set of drivers. | |
| * Use the qemu -netdev and -device options, or the legacy -net option, to | |
| enable NIC support: <http://wiki.qemu.org/Documentation/Networking>. | |
| * For a qemu >= 1.5 binary running *without* any "-M machine" option where | |
| "machine" would identify a < qemu-1.5 configuration (for example: "-M | |
| pc-i440fx-1.4" or "-M pc-0.13"), the iPXE drivers are automatically available | |
| to and configured for OVMF in the default qemu installation. | |
| * For a qemu binary in [0.13, 1.5), or a qemu >= 1.5 binary with an "-M | |
| machine" option where "machine" selects a < qemu-1.5 configuration: | |
| - download a >= 1.5.0-rc1 source tarball from <http://wiki.qemu.org/Download>, | |
| - extract the following iPXE driver files from the tarball and install them | |
| in a location that is accessible to qemu processes (this may depend on your | |
| SELinux configuration, for example): | |
| qemu-VERSION/pc-bios/efi-e1000.rom | |
| qemu-VERSION/pc-bios/efi-ne2k_pci.rom | |
| qemu-VERSION/pc-bios/efi-pcnet.rom | |
| qemu-VERSION/pc-bios/efi-rtl8139.rom | |
| qemu-VERSION/pc-bios/efi-virtio.rom | |
| - extend the NIC's -device option on the qemu command line with a matching | |
| "romfile=" optarg: | |
| -device e1000,...,romfile=/full/path/to/efi-e1000.rom | |
| -device ne2k_pci,...,romfile=/full/path/to/efi-ne2k_pci.rom | |
| -device pcnet,...,romfile=/full/path/to/efi-pcnet.rom | |
| -device rtl8139,...,romfile=/full/path/to/efi-rtl8139.rom | |
| -device virtio-net-pci,...,romfile=/full/path/to/efi-virtio.rom | |
| * Independently of the iPXE NIC drivers, the default OVMF build provides a | |
| basic virtio-net driver, located in OvmfPkg/VirtioNetDxe. | |
| * Also independently of the iPXE NIC drivers, Intel's proprietary E1000 NIC | |
| driver (PROEFI) can be embedded in the OVMF image at build time: | |
| - Download UEFI drivers for the e1000 NIC | |
| - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17515&lang=eng | |
| - Install the drivers into a directory called Intel3.5 in your WORKSPACE. | |
| - Include the driver in OVMF during the build: | |
| - Add "-D E1000_ENABLE -D FD_SIZE_2MB" to your build command, | |
| - For example: "build -D E1000_ENABLE -D FD_SIZE_2MB". | |
| * When a matching iPXE driver is configured for a NIC as described above, it | |
| takes priority over other drivers that could possibly drive the card too: | |
| | e1000 ne2k_pci pcnet rtl8139 virtio-net-pci | |
| -------------+------------------------------------------------ | |
| iPXE | x x x x x | |
| VirtioNetDxe | x | |
| Intel PROEFI | x | |
| === OVMF Flash Layout === | |
| Like all current IA32/X64 system designs, OVMF's firmware | |
| device (rom/flash) appears in QEMU's physical address space | |
| just below 4GB (0x100000000). | |
| The layout of the firmware device in memory looks like: | |
| +--------------------------------------- 4GB (0x100000000) | |
| | VTF0 (16-bit reset code) and OVMF SEC | |
| | (SECFV) | |
| +--------------------------------------- varies based on flash size | |
| | | |
| | Compressed main firmware image | |
| | (FVMAIN_COMPACT) | |
| | | |
| +--------------------------------------- base + 0x20000 | |
| | Fault-tolerant write (FTW) | |
| | Spare blocks (64KB/0x10000) | |
| +--------------------------------------- base + 0x10000 | |
| | FTW Work block (4KB/0x1000) | |
| +--------------------------------------- base + 0x0f000 | |
| | Event log area (4KB/0x1000) | |
| +--------------------------------------- base + 0x0e000 | |
| | Non-volatile variable storage | |
| | area (56KB/0xe000) | |
| +--------------------------------------- base address | |
| OVMF supports building a 1MB or a 2MB flash image. The base address for | |
| a 1MB image in QEMU physical memory is 0xfff00000. The base address for | |
| a 2MB image is 0xffe00000. | |
| The code in SECFV locates FVMAIN_COMPACT, and decompresses the | |
| main firmware (MAINFV) into RAM memory at address 0x800000. The | |
| remaining OVMF firmware then uses this decompressed firmware | |
| volume image. | |
| === UNIXGCC Debug === | |
| If you build with the UNIXGCC toolchain, then debugging will be disabled | |
| due to larger image sizes being produced by the UNIXGCC toolchain. The | |
| first choice recommendation is to use GCC44 or newer instead. | |
| If you must use UNIXGCC, then you can override the build options for | |
| particular libraries and modules in the .dsc to re-enable debugging | |
| selectively. For example: | |
| [Components] | |
| OvmfPkg/Library/PlatformBdsLib/PlatformBdsLib.inf { | |
| <BuildOptions> | |
| GCC:*_*_*_CC_FLAGS = -UMDEPKG_NDEBUG | |
| } | |
| IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf { | |
| <BuildOptions> | |
| GCC:*_*_*_CC_FLAGS = -UMDEPKG_NDEBUG | |
| } | |
| === UEFI Windows 7 & Windows 2008 Server === | |
| * One of the '-vga std' and '-vga qxl' QEMU options should be used. | |
| * Only one video mode, 1024x768x32, is supported at OS runtime. | |
| * The '-vga qxl' QEMU option is recommended. After booting the installed | |
| guest OS, select the video card in Device Manager, and upgrade its driver | |
| to the QXL XDDM one. Download location: | |
| <http://www.spice-space.org/download.html>, Guest | Windows binaries. | |
| This enables further resolutions at OS runtime, and provides S3 | |
| (suspend/resume) capability. |