/**@file | |
Copyright (c) 2007 - 2009, Intel Corporation. All rights reserved.<BR> | |
This program and the accompanying materials | |
are licensed and made available under the terms and conditions of the BSD License | |
which accompanies this distribution. The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
Module Name: | |
FWBlockService.c | |
Abstract: | |
Revision History | |
**/ | |
#include "FWBlockService.h" | |
#include "EfiFlashMap.h" | |
#include "FileIo.h" | |
#include "FlashLayout.h" | |
ESAL_FWB_GLOBAL *mFvbModuleGlobal; | |
VOID *mSFSRegistration; | |
#define TRY_ASSIGN(var, value) if(var != NULL) {*var = value;} | |
EFI_FW_VOL_BLOCK_DEVICE mFvbDeviceTemplate = { | |
FVB_DEVICE_SIGNATURE, | |
{ | |
{ | |
{ | |
HARDWARE_DEVICE_PATH, | |
HW_MEMMAP_DP, | |
{ | |
sizeof (MEMMAP_DEVICE_PATH), | |
0 | |
} | |
}, | |
EfiMemoryMappedIO, | |
0, | |
0, | |
}, | |
{ | |
END_DEVICE_PATH_TYPE, | |
END_ENTIRE_DEVICE_PATH_SUBTYPE, | |
{ | |
sizeof (EFI_DEVICE_PATH_PROTOCOL), | |
0 | |
} | |
} | |
}, | |
0, | |
{ | |
FvbProtocolGetAttributes, | |
FvbProtocolSetAttributes, | |
FvbProtocolGetPhysicalAddress, | |
FvbProtocolGetBlockSize, | |
FvbProtocolRead, | |
FvbProtocolWrite, | |
FvbProtocolEraseBlocks, | |
NULL | |
} | |
}; | |
EFI_STATUS | |
FlashFdWrite ( | |
IN UINTN Address, | |
IN EFI_FW_VOL_INSTANCE *FwhInstance, | |
IN OUT UINTN *NumBytes, | |
IN UINT8 *Buffer | |
) | |
/*++ | |
Routine Description: | |
Writes specified number of bytes from the input buffer to the address | |
Arguments: | |
Returns: | |
--*/ | |
{ | |
EFI_STATUS Status; | |
EFI_FILE_PROTOCOL *File; | |
UINTN FileOffset; | |
UINTN BufferForFile; | |
UINTN Length; | |
Status = EFI_SUCCESS; | |
CopyMem ((VOID *) Address, Buffer, *NumBytes); | |
if (!EfiAtRuntime () && (FwhInstance->Device != NULL)) { | |
Status = FileOpen (FwhInstance->Device, FwhInstance->MappedFile, &File, EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE); | |
ASSERT_EFI_ERROR (Status); | |
if (!EFI_ERROR (Status)) { | |
if (Address - FwhInstance->FvBase[FVB_PHYSICAL] < FwhInstance->Offset) { | |
FileOffset = 0; | |
BufferForFile = FwhInstance->FvBase[FVB_PHYSICAL] + FwhInstance->Offset; | |
Length = *NumBytes - (FwhInstance->Offset - (Address - FwhInstance->FvBase[FVB_PHYSICAL])); | |
} else { | |
FileOffset = Address - FwhInstance->FvBase[FVB_PHYSICAL] - FwhInstance->Offset; | |
BufferForFile = Address; | |
Length = *NumBytes; | |
} | |
Status = FileWrite (File, FileOffset, BufferForFile, Length); | |
ASSERT_EFI_ERROR (Status); | |
FileClose (File); | |
} | |
} | |
return Status; | |
} | |
EFI_STATUS | |
FlashFdErase ( | |
IN UINTN Address, | |
IN EFI_FW_VOL_INSTANCE *FwhInstance, | |
IN UINTN LbaLength | |
) | |
/*++ | |
Routine Description: | |
Erase a certain block from address LbaWriteAddress | |
Arguments: | |
Returns: | |
--*/ | |
{ | |
EFI_STATUS Status; | |
EFI_FILE_PROTOCOL *File; | |
UINTN FileOffset; | |
UINTN BufferForFile; | |
UINTN Length; | |
Status = EFI_SUCCESS; | |
SetMem ((VOID *)Address, LbaLength, 0xff); | |
if (!EfiAtRuntime () && (FwhInstance->Device != NULL)) { | |
Status = FileOpen (FwhInstance->Device, FwhInstance->MappedFile, &File, EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE); | |
ASSERT_EFI_ERROR (Status); | |
if (!EFI_ERROR (Status)) { | |
if (Address - FwhInstance->FvBase[FVB_PHYSICAL] < FwhInstance->Offset) { | |
FileOffset = 0; | |
BufferForFile = FwhInstance->FvBase[FVB_PHYSICAL] + FwhInstance->Offset; | |
Length = LbaLength - (FwhInstance->Offset - (Address - FwhInstance->FvBase[FVB_PHYSICAL])); | |
} else { | |
FileOffset = Address - FwhInstance->FvBase[FVB_PHYSICAL] - FwhInstance->Offset; | |
BufferForFile = Address; | |
Length = LbaLength; | |
} | |
Status = FileWrite (File, FileOffset, BufferForFile, Length); | |
ASSERT_EFI_ERROR (Status); | |
FileClose (File); | |
} | |
} | |
return Status; | |
} | |
VOID | |
EFIAPI | |
FvbVirtualddressChangeEvent ( | |
IN EFI_EVENT Event, | |
IN VOID *Context | |
) | |
/*++ | |
Routine Description: | |
Fixup internal data so that EFI and SAL can be call in virtual mode. | |
Call the passed in Child Notify event and convert the mFvbModuleGlobal | |
date items to there virtual address. | |
mFvbModuleGlobal->FvInstance[FVB_PHYSICAL] - Physical copy of instance data | |
mFvbModuleGlobal->FvInstance[FVB_VIRTUAL] - Virtual pointer to common | |
instance data. | |
Arguments: | |
(Standard EFI notify event - EFI_EVENT_NOTIFY) | |
Returns: | |
None | |
--*/ | |
{ | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
UINTN Index; | |
EfiConvertPointer (0, (VOID **) &mFvbModuleGlobal->FvInstance[FVB_VIRTUAL]); | |
// | |
// Convert the base address of all the instances | |
// | |
Index = 0; | |
FwhInstance = mFvbModuleGlobal->FvInstance[FVB_PHYSICAL]; | |
while (Index < mFvbModuleGlobal->NumFv) { | |
EfiConvertPointer (0, (VOID **) &FwhInstance->FvBase[FVB_VIRTUAL]); | |
FwhInstance = (EFI_FW_VOL_INSTANCE *) ((UINTN)((UINT8 *)FwhInstance) + FwhInstance->VolumeHeader.HeaderLength | |
+ (sizeof (EFI_FW_VOL_INSTANCE) - sizeof (EFI_FIRMWARE_VOLUME_HEADER))); | |
Index++; | |
} | |
EfiConvertPointer (0, (VOID **) &mFvbModuleGlobal->FvbScratchSpace[FVB_VIRTUAL]); | |
EfiConvertPointer (0, (VOID **) &mFvbModuleGlobal); | |
} | |
EFI_STATUS | |
GetFvbInstance ( | |
IN UINTN Instance, | |
IN ESAL_FWB_GLOBAL *Global, | |
OUT EFI_FW_VOL_INSTANCE **FwhInstance, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Retrieves the physical address of a memory mapped FV | |
Arguments: | |
Instance - The FV instance whose base address is going to be | |
returned | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
FwhInstance - The EFI_FW_VOL_INSTANCE fimrware instance structure | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
EFI_INVALID_PARAMETER - Instance not found | |
--*/ | |
{ | |
EFI_FW_VOL_INSTANCE *FwhRecord; | |
if (Instance >= Global->NumFv) { | |
return EFI_INVALID_PARAMETER; | |
} | |
// | |
// Find the right instance of the FVB private data | |
// | |
FwhRecord = Global->FvInstance[Virtual]; | |
while (Instance > 0) { | |
FwhRecord = (EFI_FW_VOL_INSTANCE *) ((UINTN)((UINT8 *)FwhRecord) + FwhRecord->VolumeHeader.HeaderLength | |
+ (sizeof (EFI_FW_VOL_INSTANCE) - sizeof (EFI_FIRMWARE_VOLUME_HEADER))); | |
Instance--; | |
} | |
*FwhInstance = FwhRecord; | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
FvbGetPhysicalAddress ( | |
IN UINTN Instance, | |
OUT EFI_PHYSICAL_ADDRESS *Address, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Retrieves the physical address of a memory mapped FV | |
Arguments: | |
Instance - The FV instance whose base address is going to be | |
returned | |
Address - Pointer to a caller allocated EFI_PHYSICAL_ADDRESS | |
that on successful return, contains the base address | |
of the firmware volume. | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
EFI_INVALID_PARAMETER - Instance not found | |
--*/ | |
{ | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
EFI_STATUS Status; | |
// | |
// Find the right instance of the FVB private data | |
// | |
Status = GetFvbInstance (Instance, Global, &FwhInstance, Virtual); | |
ASSERT_EFI_ERROR (Status); | |
*Address = FwhInstance->FvBase[Virtual]; | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
FvbGetVolumeAttributes ( | |
IN UINTN Instance, | |
OUT EFI_FVB_ATTRIBUTES_2 *Attributes, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Retrieves attributes, insures positive polarity of attribute bits, returns | |
resulting attributes in output parameter | |
Arguments: | |
Instance - The FV instance whose attributes is going to be | |
returned | |
Attributes - Output buffer which contains attributes | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
EFI_INVALID_PARAMETER - Instance not found | |
--*/ | |
{ | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
EFI_STATUS Status; | |
// | |
// Find the right instance of the FVB private data | |
// | |
Status = GetFvbInstance (Instance, Global, &FwhInstance, Virtual); | |
ASSERT_EFI_ERROR (Status); | |
*Attributes = FwhInstance->VolumeHeader.Attributes; | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
FvbGetLbaAddress ( | |
IN UINTN Instance, | |
IN EFI_LBA Lba, | |
OUT UINTN *LbaAddress OPTIONAL, | |
OUT UINTN *LbaLength OPTIONAL, | |
OUT UINTN *NumOfBlocks OPTIONAL, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Retrieves the starting address of an LBA in an FV | |
Arguments: | |
Instance - The FV instance which the Lba belongs to | |
Lba - The logical block address | |
LbaAddress - On output, contains the physical starting address | |
of the Lba for writing | |
LbaLength - On output, contains the length of the block | |
NumOfBlocks - A pointer to a caller allocated UINTN in which the | |
number of consecutive blocks starting with Lba is | |
returned. All blocks in this range have a size of | |
BlockSize | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
EFI_INVALID_PARAMETER - Instance not found | |
--*/ | |
{ | |
UINT32 NumBlocks; | |
UINT32 BlockLength; | |
UINTN Offset; | |
EFI_LBA StartLba; | |
EFI_LBA NextLba; | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
EFI_FV_BLOCK_MAP_ENTRY *BlockMap; | |
EFI_STATUS Status; | |
// | |
// Find the right instance of the FVB private data | |
// | |
Status = GetFvbInstance (Instance, Global, &FwhInstance, Virtual); | |
ASSERT_EFI_ERROR (Status); | |
StartLba = 0; | |
Offset = 0; | |
BlockMap = &(FwhInstance->VolumeHeader.BlockMap[0]); | |
// | |
// Parse the blockmap of the FV to find which map entry the Lba belongs to | |
// | |
while (TRUE) { | |
NumBlocks = BlockMap->NumBlocks; | |
BlockLength = BlockMap->Length; | |
if (NumBlocks == 0 || BlockLength == 0) { | |
return EFI_INVALID_PARAMETER; | |
} | |
NextLba = StartLba + NumBlocks; | |
// | |
// The map entry found | |
// | |
if (Lba >= StartLba && Lba < NextLba) { | |
Offset = Offset + (UINTN) MultU64x32 ((Lba - StartLba), BlockLength); | |
if (LbaAddress) { | |
*LbaAddress = FwhInstance->FvBase[Virtual] + Offset; | |
} | |
if (LbaLength) { | |
*LbaLength = BlockLength; | |
} | |
if (NumOfBlocks) { | |
*NumOfBlocks = (UINTN) (NextLba - Lba); | |
} | |
return EFI_SUCCESS; | |
} | |
StartLba = NextLba; | |
Offset = Offset + NumBlocks * BlockLength; | |
BlockMap++; | |
} | |
} | |
EFI_STATUS | |
FvbReadBlock ( | |
IN UINTN Instance, | |
IN EFI_LBA Lba, | |
IN UINTN BlockOffset, | |
IN OUT UINTN *NumBytes, | |
IN UINT8 *Buffer, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Reads specified number of bytes into a buffer from the specified block | |
Arguments: | |
Instance - The FV instance to be read from | |
Lba - The logical block address to be read from | |
BlockOffset - Offset into the block at which to begin reading | |
NumBytes - Pointer that on input contains the total size of | |
the buffer. On output, it contains the total number | |
of bytes read | |
Buffer - Pointer to a caller allocated buffer that will be | |
used to hold the data read | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - The firmware volume was read successfully and | |
contents are in Buffer | |
EFI_BAD_BUFFER_SIZE - Read attempted across a LBA boundary. On output, | |
NumBytes contains the total number of bytes returned | |
in Buffer | |
EFI_ACCESS_DENIED - The firmware volume is in the ReadDisabled state | |
EFI_DEVICE_ERROR - The block device is not functioning correctly and | |
could not be read | |
EFI_INVALID_PARAMETER - Instance not found, or NumBytes, Buffer are NULL | |
--*/ | |
{ | |
EFI_FVB_ATTRIBUTES_2 Attributes; | |
UINTN LbaAddress; | |
UINTN LbaLength; | |
EFI_STATUS Status; | |
// | |
// Check for invalid conditions | |
// | |
if ((NumBytes == NULL) || (Buffer == NULL)) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (*NumBytes == 0) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = FvbGetLbaAddress (Instance, Lba, &LbaAddress, &LbaLength, NULL, Global, Virtual); | |
if (EFI_ERROR (Status)) { | |
return Status; | |
} | |
// | |
// Check if the FV is read enabled | |
// | |
FvbGetVolumeAttributes (Instance, &Attributes, Global, Virtual); | |
if ((Attributes & EFI_FVB2_READ_STATUS) == 0) { | |
return EFI_ACCESS_DENIED; | |
} | |
// | |
// Perform boundary checks and adjust NumBytes | |
// | |
if (BlockOffset > LbaLength) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (LbaLength < (*NumBytes + BlockOffset)) { | |
*NumBytes = (UINT32) (LbaLength - BlockOffset); | |
Status = EFI_BAD_BUFFER_SIZE; | |
} | |
CopyMem (Buffer, (VOID *) (LbaAddress + BlockOffset), (UINTN) *NumBytes); | |
return Status; | |
} | |
EFI_STATUS | |
FvbWriteBlock ( | |
IN UINTN Instance, | |
IN EFI_LBA Lba, | |
IN UINTN BlockOffset, | |
IN OUT UINTN *NumBytes, | |
IN UINT8 *Buffer, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Writes specified number of bytes from the input buffer to the block | |
Arguments: | |
Instance - The FV instance to be written to | |
Lba - The starting logical block index to write to | |
BlockOffset - Offset into the block at which to begin writing | |
NumBytes - Pointer that on input contains the total size of | |
the buffer. On output, it contains the total number | |
of bytes actually written | |
Buffer - Pointer to a caller allocated buffer that contains | |
the source for the write | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - The firmware volume was written successfully | |
EFI_BAD_BUFFER_SIZE - Write attempted across a LBA boundary. On output, | |
NumBytes contains the total number of bytes | |
actually written | |
EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state | |
EFI_DEVICE_ERROR - The block device is not functioning correctly and | |
could not be written | |
EFI_INVALID_PARAMETER - Instance not found, or NumBytes, Buffer are NULL | |
--*/ | |
{ | |
EFI_FVB_ATTRIBUTES_2 Attributes; | |
UINTN LbaAddress; | |
UINTN LbaLength; | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
EFI_STATUS Status; | |
EFI_STATUS ReturnStatus; | |
// | |
// Find the right instance of the FVB private data | |
// | |
Status = GetFvbInstance (Instance, Global, &FwhInstance, Virtual); | |
ASSERT_EFI_ERROR (Status); | |
// | |
// Writes are enabled in the init routine itself | |
// | |
if (!FwhInstance->WriteEnabled) { | |
return EFI_ACCESS_DENIED; | |
} | |
// | |
// Check for invalid conditions | |
// | |
if ((NumBytes == NULL) || (Buffer == NULL)) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (*NumBytes == 0) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = FvbGetLbaAddress (Instance, Lba, &LbaAddress, &LbaLength, NULL, Global, Virtual); | |
if (EFI_ERROR (Status)) { | |
return Status; | |
} | |
// | |
// Check if the FV is write enabled | |
// | |
FvbGetVolumeAttributes (Instance, &Attributes, Global, Virtual); | |
if ((Attributes & EFI_FVB2_WRITE_STATUS) == 0) { | |
return EFI_ACCESS_DENIED; | |
} | |
// | |
// Perform boundary checks and adjust NumBytes | |
// | |
if (BlockOffset > LbaLength) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (LbaLength < (*NumBytes + BlockOffset)) { | |
*NumBytes = (UINT32) (LbaLength - BlockOffset); | |
Status = EFI_BAD_BUFFER_SIZE; | |
} | |
ReturnStatus = FlashFdWrite ( | |
LbaAddress + BlockOffset, | |
FwhInstance, | |
NumBytes, | |
Buffer | |
); | |
if (EFI_ERROR (ReturnStatus)) { | |
return ReturnStatus; | |
} | |
return Status; | |
} | |
EFI_STATUS | |
FvbEraseBlock ( | |
IN UINTN Instance, | |
IN EFI_LBA Lba, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Erases and initializes a firmware volume block | |
Arguments: | |
Instance - The FV instance to be erased | |
Lba - The logical block index to be erased | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - The erase request was successfully completed | |
EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state | |
EFI_DEVICE_ERROR - The block device is not functioning correctly and | |
could not be written. Firmware device may have been | |
partially erased | |
EFI_INVALID_PARAMETER - Instance not found | |
--*/ | |
{ | |
EFI_FVB_ATTRIBUTES_2 Attributes; | |
UINTN LbaAddress; | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
UINTN LbaLength; | |
EFI_STATUS Status; | |
// | |
// Find the right instance of the FVB private data | |
// | |
Status = GetFvbInstance (Instance, Global, &FwhInstance, Virtual); | |
ASSERT_EFI_ERROR (Status); | |
// | |
// Writes are enabled in the init routine itself | |
// | |
if (!FwhInstance->WriteEnabled) { | |
return EFI_ACCESS_DENIED; | |
} | |
// | |
// Check if the FV is write enabled | |
// | |
FvbGetVolumeAttributes (Instance, &Attributes, Global, Virtual); | |
if ((Attributes & EFI_FVB2_WRITE_STATUS) == 0) { | |
return EFI_ACCESS_DENIED; | |
} | |
// | |
// Get the starting address of the block for erase. For debug reasons, | |
// LbaWriteAddress may not be the same as LbaAddress. | |
// | |
Status = FvbGetLbaAddress (Instance, Lba, &LbaAddress, &LbaLength, NULL, Global, Virtual); | |
if (EFI_ERROR (Status)) { | |
return Status; | |
} | |
return FlashFdErase ( | |
LbaAddress, | |
FwhInstance, | |
LbaLength | |
); | |
} | |
EFI_STATUS | |
FvbSetVolumeAttributes ( | |
IN UINTN Instance, | |
IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes, | |
IN ESAL_FWB_GLOBAL *Global, | |
IN BOOLEAN Virtual | |
) | |
/*++ | |
Routine Description: | |
Modifies the current settings of the firmware volume according to the | |
input parameter, and returns the new setting of the volume | |
Arguments: | |
Instance - The FV instance whose attributes is going to be | |
modified | |
Attributes - On input, it is a pointer to EFI_FVB_ATTRIBUTES_2 | |
containing the desired firmware volume settings. | |
On successful return, it contains the new settings | |
of the firmware volume | |
Global - Pointer to ESAL_FWB_GLOBAL that contains all | |
instance data | |
Virtual - Whether CPU is in virtual or physical mode | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
EFI_ACCESS_DENIED - The volume setting is locked and cannot be modified | |
EFI_INVALID_PARAMETER - Instance not found, or The attributes requested are | |
in conflict with the capabilities as declared in the | |
firmware volume header | |
--*/ | |
{ | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
EFI_FVB_ATTRIBUTES_2 OldAttributes; | |
EFI_FVB_ATTRIBUTES_2 *AttribPtr; | |
UINT32 Capabilities; | |
UINT32 OldStatus; | |
UINT32 NewStatus; | |
EFI_STATUS Status; | |
// | |
// Find the right instance of the FVB private data | |
// | |
Status = GetFvbInstance (Instance, Global, &FwhInstance, Virtual); | |
ASSERT_EFI_ERROR (Status); | |
AttribPtr = (EFI_FVB_ATTRIBUTES_2 *) &(FwhInstance->VolumeHeader.Attributes); | |
OldAttributes = *AttribPtr; | |
Capabilities = OldAttributes & EFI_FVB2_CAPABILITIES; | |
OldStatus = OldAttributes & EFI_FVB2_STATUS; | |
NewStatus = *Attributes & EFI_FVB2_STATUS; | |
// | |
// If firmware volume is locked, no status bit can be updated | |
// | |
if (OldAttributes & EFI_FVB2_LOCK_STATUS) { | |
if (OldStatus ^ NewStatus) { | |
return EFI_ACCESS_DENIED; | |
} | |
} | |
// | |
// Test read disable | |
// | |
if ((Capabilities & EFI_FVB2_READ_DISABLED_CAP) == 0) { | |
if ((NewStatus & EFI_FVB2_READ_STATUS) == 0) { | |
return EFI_INVALID_PARAMETER; | |
} | |
} | |
// | |
// Test read enable | |
// | |
if ((Capabilities & EFI_FVB2_READ_ENABLED_CAP) == 0) { | |
if (NewStatus & EFI_FVB2_READ_STATUS) { | |
return EFI_INVALID_PARAMETER; | |
} | |
} | |
// | |
// Test write disable | |
// | |
if ((Capabilities & EFI_FVB2_WRITE_DISABLED_CAP) == 0) { | |
if ((NewStatus & EFI_FVB2_WRITE_STATUS) == 0) { | |
return EFI_INVALID_PARAMETER; | |
} | |
} | |
// | |
// Test write enable | |
// | |
if ((Capabilities & EFI_FVB2_WRITE_ENABLED_CAP) == 0) { | |
if (NewStatus & EFI_FVB2_WRITE_STATUS) { | |
return EFI_INVALID_PARAMETER; | |
} | |
} | |
// | |
// Test lock | |
// | |
if ((Capabilities & EFI_FVB2_LOCK_CAP) == 0) { | |
if (NewStatus & EFI_FVB2_LOCK_STATUS) { | |
return EFI_INVALID_PARAMETER; | |
} | |
} | |
*AttribPtr = (*AttribPtr) & (0xFFFFFFFF & (~EFI_FVB2_STATUS)); | |
*AttribPtr = (*AttribPtr) | NewStatus; | |
*Attributes = *AttribPtr; | |
return EFI_SUCCESS; | |
} | |
// | |
// FVB protocol APIs | |
// | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolGetPhysicalAddress ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
OUT EFI_PHYSICAL_ADDRESS *Address | |
) | |
/*++ | |
Routine Description: | |
Retrieves the physical address of the device. | |
Arguments: | |
This - Calling context | |
Address - Output buffer containing the address. | |
Returns: | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
return FvbGetPhysicalAddress (FvbDevice->Instance, Address, mFvbModuleGlobal, EfiGoneVirtual ()); | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolGetBlockSize ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
IN EFI_LBA Lba, | |
OUT UINTN *BlockSize, | |
OUT UINTN *NumOfBlocks | |
) | |
/*++ | |
Routine Description: | |
Retrieve the size of a logical block | |
Arguments: | |
This - Calling context | |
Lba - Indicates which block to return the size for. | |
BlockSize - A pointer to a caller allocated UINTN in which | |
the size of the block is returned | |
NumOfBlocks - a pointer to a caller allocated UINTN in which the | |
number of consecutive blocks starting with Lba is | |
returned. All blocks in this range have a size of | |
BlockSize | |
Returns: | |
EFI_SUCCESS - The firmware volume was read successfully and | |
contents are in Buffer | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
return FvbGetLbaAddress ( | |
FvbDevice->Instance, | |
Lba, | |
NULL, | |
BlockSize, | |
NumOfBlocks, | |
mFvbModuleGlobal, | |
EfiGoneVirtual () | |
); | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolGetAttributes ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
OUT EFI_FVB_ATTRIBUTES_2 *Attributes | |
) | |
/*++ | |
Routine Description: | |
Retrieves Volume attributes. No polarity translations are done. | |
Arguments: | |
This - Calling context | |
Attributes - output buffer which contains attributes | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
return FvbGetVolumeAttributes (FvbDevice->Instance, Attributes, mFvbModuleGlobal, EfiGoneVirtual ()); | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolSetAttributes ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes | |
) | |
/*++ | |
Routine Description: | |
Sets Volume attributes. No polarity translations are done. | |
Arguments: | |
This - Calling context | |
Attributes - output buffer which contains attributes | |
Returns: | |
EFI_SUCCESS - Successfully returns | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
return FvbSetVolumeAttributes (FvbDevice->Instance, Attributes, mFvbModuleGlobal, EfiGoneVirtual ()); | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolEraseBlocks ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
... | |
) | |
/*++ | |
Routine Description: | |
The EraseBlock() function erases one or more blocks as denoted by the | |
variable argument list. The entire parameter list of blocks must be verified | |
prior to erasing any blocks. If a block is requested that does not exist | |
within the associated firmware volume (it has a larger index than the last | |
block of the firmware volume), the EraseBlock() function must return | |
EFI_INVALID_PARAMETER without modifying the contents of the firmware volume. | |
Arguments: | |
This - Calling context | |
... - Starting LBA followed by Number of Lba to erase. | |
a -1 to terminate the list. | |
Returns: | |
EFI_SUCCESS - The erase request was successfully completed | |
EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state | |
EFI_DEVICE_ERROR - The block device is not functioning correctly and | |
could not be written. Firmware device may have been | |
partially erased | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
UINTN NumOfBlocks; | |
VA_LIST args; | |
EFI_LBA StartingLba; | |
UINTN NumOfLba; | |
EFI_STATUS Status; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
Status = GetFvbInstance (FvbDevice->Instance, mFvbModuleGlobal, &FwhInstance, EfiGoneVirtual ()); | |
ASSERT_EFI_ERROR (Status); | |
NumOfBlocks = FwhInstance->NumOfBlocks; | |
VA_START (args, This); | |
do { | |
StartingLba = VA_ARG (args, EFI_LBA); | |
if (StartingLba == EFI_LBA_LIST_TERMINATOR) { | |
break; | |
} | |
NumOfLba = VA_ARG (args, UINT32); | |
// | |
// Check input parameters | |
// | |
if ((NumOfLba == 0) || ((StartingLba + NumOfLba) > NumOfBlocks)) { | |
VA_END (args); | |
return EFI_INVALID_PARAMETER; | |
} | |
} while (1); | |
VA_END (args); | |
VA_START (args, This); | |
do { | |
StartingLba = VA_ARG (args, EFI_LBA); | |
if (StartingLba == EFI_LBA_LIST_TERMINATOR) { | |
break; | |
} | |
NumOfLba = VA_ARG (args, UINT32); | |
while (NumOfLba > 0) { | |
Status = FvbEraseBlock (FvbDevice->Instance, StartingLba, mFvbModuleGlobal, EfiGoneVirtual ()); | |
if (EFI_ERROR (Status)) { | |
VA_END (args); | |
return Status; | |
} | |
StartingLba++; | |
NumOfLba--; | |
} | |
} while (1); | |
VA_END (args); | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolWrite ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
IN EFI_LBA Lba, | |
IN UINTN Offset, | |
IN OUT UINTN *NumBytes, | |
IN UINT8 *Buffer | |
) | |
/*++ | |
Routine Description: | |
Writes data beginning at Lba:Offset from FV. The write terminates either | |
when *NumBytes of data have been written, or when a block boundary is | |
reached. *NumBytes is updated to reflect the actual number of bytes | |
written. The write opertion does not include erase. This routine will | |
attempt to write only the specified bytes. If the writes do not stick, | |
it will return an error. | |
Arguments: | |
This - Calling context | |
Lba - Block in which to begin write | |
Offset - Offset in the block at which to begin write | |
NumBytes - On input, indicates the requested write size. On | |
output, indicates the actual number of bytes written | |
Buffer - Buffer containing source data for the write. | |
Returns: | |
EFI_SUCCESS - The firmware volume was written successfully | |
EFI_BAD_BUFFER_SIZE - Write attempted across a LBA boundary. On output, | |
NumBytes contains the total number of bytes | |
actually written | |
EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state | |
EFI_DEVICE_ERROR - The block device is not functioning correctly and | |
could not be written | |
EFI_INVALID_PARAMETER - NumBytes or Buffer are NULL | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
return FvbWriteBlock (FvbDevice->Instance, Lba, Offset, NumBytes, Buffer, mFvbModuleGlobal, EfiGoneVirtual ()); | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbProtocolRead ( | |
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This, | |
IN EFI_LBA Lba, | |
IN UINTN Offset, | |
IN OUT UINTN *NumBytes, | |
IN UINT8 *Buffer | |
) | |
/*++ | |
Routine Description: | |
Reads data beginning at Lba:Offset from FV. The Read terminates either | |
when *NumBytes of data have been read, or when a block boundary is | |
reached. *NumBytes is updated to reflect the actual number of bytes | |
written. The write opertion does not include erase. This routine will | |
attempt to write only the specified bytes. If the writes do not stick, | |
it will return an error. | |
Arguments: | |
This - Calling context | |
Lba - Block in which to begin Read | |
Offset - Offset in the block at which to begin Read | |
NumBytes - On input, indicates the requested write size. On | |
output, indicates the actual number of bytes Read | |
Buffer - Buffer containing source data for the Read. | |
Returns: | |
EFI_SUCCESS - The firmware volume was read successfully and | |
contents are in Buffer | |
EFI_BAD_BUFFER_SIZE - Read attempted across a LBA boundary. On output, | |
NumBytes contains the total number of bytes returned | |
in Buffer | |
EFI_ACCESS_DENIED - The firmware volume is in the ReadDisabled state | |
EFI_DEVICE_ERROR - The block device is not functioning correctly and | |
could not be read | |
EFI_INVALID_PARAMETER - NumBytes or Buffer are NULL | |
--*/ | |
{ | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
FvbDevice = FVB_DEVICE_FROM_THIS (This); | |
return FvbReadBlock (FvbDevice->Instance, Lba, Offset, NumBytes, Buffer, mFvbModuleGlobal, EfiGoneVirtual ()); | |
} | |
EFI_STATUS | |
ValidateFvHeader ( | |
EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader | |
) | |
/*++ | |
Routine Description: | |
Check the integrity of firmware volume header | |
Arguments: | |
FwVolHeader - A pointer to a firmware volume header | |
Returns: | |
EFI_SUCCESS - The firmware volume is consistent | |
EFI_NOT_FOUND - The firmware volume has corrupted. So it is not an FV | |
--*/ | |
{ | |
UINT16 *Ptr; | |
UINT16 HeaderLength; | |
UINT16 Checksum; | |
// | |
// Verify the header revision, header signature, length | |
// Length of FvBlock cannot be 2**64-1 | |
// HeaderLength cannot be an odd number | |
// | |
if ((FwVolHeader->Revision != EFI_FVH_REVISION) || | |
(FwVolHeader->Signature != EFI_FVH_SIGNATURE) || | |
(FwVolHeader->FvLength == ((UINTN) -1)) || | |
((FwVolHeader->HeaderLength & 0x01) != 0) | |
) { | |
return EFI_NOT_FOUND; | |
} | |
// | |
// Verify the header checksum | |
// | |
HeaderLength = (UINT16) (FwVolHeader->HeaderLength / 2); | |
Ptr = (UINT16 *) FwVolHeader; | |
Checksum = 0; | |
while (HeaderLength > 0) { | |
Checksum = Checksum + (*Ptr); | |
HeaderLength--; | |
Ptr++; | |
} | |
if (Checksum != 0) { | |
return EFI_NOT_FOUND; | |
} | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
GetFvbHeader ( | |
IN OUT EFI_PEI_HOB_POINTERS *HobList, | |
OUT EFI_FIRMWARE_VOLUME_HEADER **FwVolHeader, | |
OUT EFI_PHYSICAL_ADDRESS *BaseAddress OPTIONAL, | |
OUT UINT32 *VolumeId OPTIONAL, | |
OUT CHAR16 **MappedFile OPTIONAL, | |
OUT UINT32 *ActuralSize OPTIONAL, | |
OUT UINT32 *Offset OPTIONAL, | |
OUT BOOLEAN *WriteBack OPTIONAL | |
) | |
{ | |
EFI_STATUS Status; | |
EFI_FLASH_MAP_FS_ENTRY_DATA *FlashMapEntry; | |
EFI_FLASH_SUBAREA_ENTRY *FlashMapSubEntry; | |
Status = EFI_SUCCESS; | |
*FwVolHeader = NULL; | |
TRY_ASSIGN (WriteBack, FALSE); | |
DEBUG ((EFI_D_INFO, "Hob start is 0x%x\n", (UINTN)(*HobList).Raw)); | |
(*HobList).Raw = GetNextGuidHob (&gEfiFlashMapHobGuid, (*HobList).Raw); | |
if ((*HobList).Raw == NULL) { | |
return EFI_NOT_FOUND; | |
} | |
FlashMapEntry = (EFI_FLASH_MAP_FS_ENTRY_DATA *) GET_GUID_HOB_DATA ((*HobList).Guid); | |
FlashMapSubEntry = &FlashMapEntry->Entries[0]; | |
// | |
// Check if it is a "FVB" area | |
// | |
if (!CompareGuid (&FlashMapSubEntry->FileSystem, &gEfiFirmwareVolumeBlockProtocolGuid)) { | |
return Status; | |
} | |
// | |
// Check if it is a "real" flash | |
// | |
if (FlashMapSubEntry->Attributes != (EFI_FLASH_AREA_FV | EFI_FLASH_AREA_MEMMAPPED_FV)) { | |
return Status; | |
} | |
TRY_ASSIGN (BaseAddress, FlashMapSubEntry->Base); | |
// | |
// Cast buffer to FLASH_AREA_INFO to get extra information related to the special FVB driver | |
// | |
TRY_ASSIGN (VolumeId, FlashMapEntry->VolumeId); | |
TRY_ASSIGN (ActuralSize, FlashMapEntry->ActuralSize); | |
TRY_ASSIGN (MappedFile, ((CHAR16 *) FlashMapEntry->FilePath)); | |
TRY_ASSIGN (Offset, FlashMapEntry->Offset); | |
DEBUG (( | |
EFI_D_INFO, | |
"FlashMap HOB: BaseAddress = 0x%x, Length = 0x%x, ActuralLength = 0x%x, Offset = 0x%x\n", | |
(UINTN) FlashMapSubEntry->Base, (UINTN) FlashMapSubEntry->Length, | |
(UINTN) FlashMapEntry->ActuralSize, (UINTN) FlashMapEntry->Offset | |
)); | |
DEBUG (( | |
EFI_D_INFO, | |
"FlashMap HOB: VolumeId = 0x%lx, MappedFile = %s\n", | |
(UINTN) FlashMapEntry->VolumeId, (UINTN) FlashMapEntry->FilePath | |
)); | |
*FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *) (UINTN) (FlashMapSubEntry->Base); | |
Status = ValidateFvHeader (*FwVolHeader); | |
if (EFI_ERROR (Status)) { | |
// | |
// Get FvbInfo | |
// | |
TRY_ASSIGN (WriteBack, TRUE); | |
Status = GetFvbInfo (FlashMapSubEntry->Length, FwVolHeader); | |
DEBUG ((EFI_D_ERROR, "Fvb: FV header invalid, GetFvbInfo - %r\n", Status)); | |
ASSERT_EFI_ERROR (Status); | |
} | |
return EFI_SUCCESS; | |
} | |
VOID | |
EFIAPI | |
OnSimpleFileSystemInstall ( | |
IN EFI_EVENT Event, | |
IN VOID *Context | |
) | |
{ | |
EFI_STATUS Status; | |
UINTN HandleSize; | |
EFI_HANDLE Handle; | |
UINTN Instance; | |
EFI_DEVICE_PATH_PROTOCOL *Device; | |
EFI_FILE_PROTOCOL *File; | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
while (TRUE) { | |
HandleSize = sizeof (EFI_HANDLE); | |
Status = gBS->LocateHandle ( | |
ByRegisterNotify, | |
NULL, | |
mSFSRegistration, | |
&HandleSize, | |
&Handle | |
); | |
if (Status == EFI_NOT_FOUND) { | |
break; | |
} | |
DEBUG ((EFI_D_ERROR, "Fwh: New FileSystem Installed!\n")); | |
ASSERT_EFI_ERROR (Status); | |
// | |
// Check if this is the storage we care about, and store it in FwhInstance | |
// | |
for (Instance = 0; Instance < mFvbModuleGlobal->NumFv; ++Instance) { | |
Status = GetFvbInstance (Instance, mFvbModuleGlobal, &FwhInstance, FALSE); | |
ASSERT_EFI_ERROR (Status); | |
if (FwhInstance->MappedFile[0] == L'\0') { | |
// | |
// The instance of FVB isn't mapped to file. | |
// | |
continue; | |
} | |
if ((FwhInstance->Device != NULL) && | |
!EFI_ERROR (CheckStoreExists (FwhInstance->Device)) | |
) { | |
// | |
// The instance of FVB has already associated to a device | |
// and the device is not removed from system. | |
// | |
DEBUG (( | |
EFI_D_ERROR, "Fwh: MappedFile FVB (0x%x:0x%x) - Already mapped, Skip!\n", | |
(UINTN) FwhInstance->FvBase[FVB_PHYSICAL], | |
(UINTN) FwhInstance->Offset | |
)); | |
continue; | |
} | |
Status = CheckStore (Handle, FwhInstance->VolumeId, &Device); | |
if (!EFI_ERROR (Status)) { | |
// | |
// Write back memory content to file | |
// | |
Status = FileOpen (Device, FwhInstance->MappedFile, &File, EFI_FILE_MODE_WRITE | EFI_FILE_MODE_READ | EFI_FILE_MODE_CREATE); | |
ASSERT_EFI_ERROR (Status); | |
if (!EFI_ERROR (Status)) { | |
DEBUG (( | |
EFI_D_ERROR, "Fwh: MappedFile FVB (0x%x:0x%x) - Write back to mapped file!\n", | |
(UINTN) FwhInstance->FvBase[FVB_PHYSICAL], | |
(UINTN) FwhInstance->Offset | |
)); | |
Status = FileWrite ( | |
File, | |
0, | |
FwhInstance->FvBase[FVB_PHYSICAL] + FwhInstance->Offset, | |
FwhInstance->ActuralSize - FwhInstance->Offset | |
); | |
ASSERT_EFI_ERROR (Status); | |
if (!EFI_ERROR (Status)) { | |
if (FwhInstance->Device != NULL) { | |
gBS->FreePool (FwhInstance->Device); | |
} | |
FwhInstance->Device = Device; | |
DEBUG (( | |
EFI_D_ERROR, "Fwh: MappedFile FVB (0x%x:0x%x) - Mapped!\n", | |
(UINTN) FwhInstance->FvBase[FVB_PHYSICAL], | |
(UINTN) FwhInstance->Offset | |
)); | |
} | |
FileClose (File); | |
} | |
} | |
} | |
} | |
} | |
VOID | |
FvbInstallSfsNotify ( | |
VOID | |
) | |
{ | |
EFI_STATUS Status; | |
EFI_EVENT Event; | |
Status = gBS->CreateEvent ( | |
EVT_NOTIFY_SIGNAL, | |
TPL_CALLBACK, | |
OnSimpleFileSystemInstall, | |
NULL, | |
&Event | |
); | |
ASSERT_EFI_ERROR (Status); | |
Status = gBS->RegisterProtocolNotify ( | |
&gEfiSimpleFileSystemProtocolGuid, | |
Event, | |
&mSFSRegistration | |
); | |
ASSERT_EFI_ERROR (Status); | |
} | |
EFI_STATUS | |
EFIAPI | |
FvbInitialize ( | |
IN EFI_HANDLE ImageHandle, | |
IN EFI_SYSTEM_TABLE *SystemTable | |
) | |
/*++ | |
Routine Description: | |
This function does common initialization for FVB services | |
Arguments: | |
Returns: | |
--*/ | |
{ | |
EFI_STATUS Status; | |
EFI_FW_VOL_INSTANCE *FwhInstance; | |
EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader; | |
EFI_PEI_HOB_POINTERS FirmwareVolumeHobList; | |
UINT32 BufferSize; | |
EFI_FV_BLOCK_MAP_ENTRY *PtrBlockMapEntry; | |
UINTN LbaAddress; | |
EFI_HANDLE FwbHandle; | |
EFI_FW_VOL_BLOCK_DEVICE *FvbDevice; | |
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *OldFwbInterface; | |
EFI_DEVICE_PATH_PROTOCOL *TempFwbDevicePath; | |
FV_DEVICE_PATH TempFvbDevicePathData; | |
UINT32 MaxLbaSize; | |
EFI_PHYSICAL_ADDRESS BaseAddress; | |
UINT32 VolumeId; | |
CHAR16 *MappedFile; | |
UINT32 ActuralSize; | |
UINT32 Offset; | |
BOOLEAN WriteBack; | |
UINTN NumOfBlocks; | |
UINTN HeaderLength; | |
BOOLEAN InstallSfsNotify; | |
HeaderLength = 0; | |
InstallSfsNotify = FALSE; | |
// | |
// Allocate runtime services data for global variable, which contains | |
// the private data of all firmware volume block instances | |
// | |
Status = gBS->AllocatePool ( | |
EfiRuntimeServicesData, | |
sizeof (ESAL_FWB_GLOBAL), | |
&mFvbModuleGlobal | |
); | |
ASSERT_EFI_ERROR (Status); | |
// | |
// Calculate the total size for all firmware volume block instances | |
// | |
BufferSize = 0; | |
FirmwareVolumeHobList.Raw = GetHobList(); | |
do { | |
Status = GetFvbHeader (&FirmwareVolumeHobList, &FwVolHeader, NULL, NULL, NULL, NULL, NULL, NULL); | |
if (EFI_ERROR (Status)) { | |
break; | |
} | |
FirmwareVolumeHobList.Raw = GET_NEXT_HOB (FirmwareVolumeHobList); | |
if (FwVolHeader) { | |
BufferSize += (FwVolHeader->HeaderLength + sizeof (EFI_FW_VOL_INSTANCE) - sizeof (EFI_FIRMWARE_VOLUME_HEADER)); | |
} | |
} while (TRUE); | |
// | |
// Only need to allocate once. There is only one copy of physical memory for | |
// the private data of each FV instance. But in virtual mode or in physical | |
// mode, the address of the the physical memory may be different. | |
// | |
Status = gBS->AllocatePool ( | |
EfiRuntimeServicesData, | |
BufferSize, | |
&mFvbModuleGlobal->FvInstance[FVB_PHYSICAL] | |
); | |
ASSERT_EFI_ERROR (Status); | |
// | |
// Make a virtual copy of the FvInstance pointer. | |
// | |
FwhInstance = mFvbModuleGlobal->FvInstance[FVB_PHYSICAL]; | |
mFvbModuleGlobal->FvInstance[FVB_VIRTUAL] = FwhInstance; | |
mFvbModuleGlobal->NumFv = 0; | |
FirmwareVolumeHobList.Raw = GetHobList(); | |
MaxLbaSize = 0; | |
// | |
// Fill in the private data of each firmware volume block instance | |
// | |
do { | |
Status = GetFvbHeader ( | |
&FirmwareVolumeHobList, &FwVolHeader, | |
&BaseAddress, &VolumeId, &MappedFile, &ActuralSize, &Offset, | |
&WriteBack | |
); | |
if (EFI_ERROR (Status)) { | |
break; | |
} | |
FirmwareVolumeHobList.Raw = GET_NEXT_HOB (FirmwareVolumeHobList); | |
if (!FwVolHeader) { | |
continue; | |
} | |
CopyMem ((UINTN *) &(FwhInstance->VolumeHeader), (UINTN *) FwVolHeader, FwVolHeader->HeaderLength); | |
FwVolHeader = &(FwhInstance->VolumeHeader); | |
FwhInstance->FvBase[FVB_PHYSICAL] = (UINTN) BaseAddress; | |
FwhInstance->FvBase[FVB_VIRTUAL] = (UINTN) BaseAddress; | |
FwhInstance->Device = NULL; | |
FwhInstance->Offset = Offset; | |
if (*MappedFile != '\0') { | |
FwhInstance->VolumeId = VolumeId; | |
FwhInstance->ActuralSize = ActuralSize; | |
StrCpy (FwhInstance->MappedFile, MappedFile); | |
InstallSfsNotify = TRUE; | |
} else { | |
FwhInstance->VolumeId = (UINT32) -1; | |
FwhInstance->ActuralSize = (UINT32) -1; | |
FwhInstance->MappedFile[0] = L'\0'; | |
} | |
DEBUG ((EFI_D_INFO, "FirmVolume Found! BaseAddress=0x%lx, VolumeId=0x%x, MappedFile=%s, Size=0x%x\n", | |
(UINTN) BaseAddress, VolumeId, MappedFile, ActuralSize)); | |
// | |
// We may expose readonly FVB in future. | |
// | |
FwhInstance->WriteEnabled = TRUE; // Ken: Why enable write? | |
EfiInitializeLock (&(FwhInstance->FvbDevLock), TPL_HIGH_LEVEL); | |
LbaAddress = (UINTN) FwhInstance->FvBase[0]; | |
NumOfBlocks = 0; | |
if (FwhInstance->WriteEnabled) { | |
for (PtrBlockMapEntry = FwVolHeader->BlockMap; PtrBlockMapEntry->NumBlocks != 0; PtrBlockMapEntry++) { | |
LbaAddress += PtrBlockMapEntry->NumBlocks * PtrBlockMapEntry->Length; | |
// | |
// Get the maximum size of a block. The size will be used to allocate | |
// buffer for Scratch space, the intermediate buffer for FVB extension | |
// protocol | |
// | |
if (MaxLbaSize < PtrBlockMapEntry->Length) { | |
MaxLbaSize = PtrBlockMapEntry->Length; | |
} | |
NumOfBlocks += PtrBlockMapEntry->NumBlocks; | |
} | |
// | |
// Write back a healthy FV header | |
// | |
if (WriteBack) { | |
Status = FlashFdErase ( | |
(UINTN) FwhInstance->FvBase[0], | |
FwhInstance, | |
FwVolHeader->BlockMap->Length | |
); | |
HeaderLength = (UINTN) FwVolHeader->HeaderLength; | |
Status = FlashFdWrite ( | |
(UINTN) FwhInstance->FvBase[0], | |
FwhInstance, | |
(UINTN *) &HeaderLength, | |
(UINT8 *) FwVolHeader | |
); | |
FwVolHeader->HeaderLength = (UINT16) HeaderLength; | |
DEBUG ((EFI_D_ERROR, "Fvb (0x%x): FV header invalid, write back - %r\n", (UINTN) FwhInstance->FvBase[0], Status)); | |
} | |
} | |
// | |
// The total number of blocks in the FV. | |
// | |
FwhInstance->NumOfBlocks = NumOfBlocks; | |
// | |
// Add a FVB Protocol Instance | |
// | |
Status = gBS->AllocatePool ( | |
EfiRuntimeServicesData, | |
sizeof (EFI_FW_VOL_BLOCK_DEVICE), | |
&FvbDevice | |
); | |
ASSERT_EFI_ERROR (Status); | |
CopyMem (FvbDevice, &mFvbDeviceTemplate, sizeof (EFI_FW_VOL_BLOCK_DEVICE)); | |
FvbDevice->Instance = mFvbModuleGlobal->NumFv; | |
mFvbModuleGlobal->NumFv++; | |
// | |
// Set up the devicepath | |
// | |
FvbDevice->DevicePath.MemMapDevPath.StartingAddress = BaseAddress; | |
FvbDevice->DevicePath.MemMapDevPath.EndingAddress = BaseAddress + (FwVolHeader->FvLength - 1); | |
// | |
// Find a handle with a matching device path that has supports FW Block protocol | |
// | |
TempFwbDevicePath = (EFI_DEVICE_PATH_PROTOCOL *) &TempFvbDevicePathData; | |
CopyMem (TempFwbDevicePath, &FvbDevice->DevicePath, sizeof (FV_DEVICE_PATH)); | |
Status = gBS->LocateDevicePath (&gEfiFirmwareVolumeBlockProtocolGuid, &TempFwbDevicePath, &FwbHandle); | |
if (EFI_ERROR (Status)) { | |
// | |
// LocateDevicePath fails so install a new interface and device path | |
// | |
FwbHandle = NULL; | |
Status = gBS->InstallMultipleProtocolInterfaces ( | |
&FwbHandle, | |
&gEfiFirmwareVolumeBlockProtocolGuid, | |
&FvbDevice->FwVolBlockInstance, | |
&gEfiDevicePathProtocolGuid, | |
&FvbDevice->DevicePath, | |
NULL | |
); | |
ASSERT_EFI_ERROR (Status); | |
} else if (IsDevicePathEnd (TempFwbDevicePath)) { | |
// | |
// Device allready exists, so reinstall the FVB protocol | |
// | |
Status = gBS->HandleProtocol ( | |
FwbHandle, | |
&gEfiFirmwareVolumeBlockProtocolGuid, | |
&OldFwbInterface | |
); | |
ASSERT_EFI_ERROR (Status); | |
Status = gBS->ReinstallProtocolInterface ( | |
FwbHandle, | |
&gEfiFirmwareVolumeBlockProtocolGuid, | |
OldFwbInterface, | |
&FvbDevice->FwVolBlockInstance | |
); | |
ASSERT_EFI_ERROR (Status); | |
} else { | |
// | |
// There was a FVB protocol on an End Device Path node | |
// | |
ASSERT (FALSE); | |
} | |
FwhInstance = (EFI_FW_VOL_INSTANCE *) | |
( | |
(UINTN) ((UINT8 *) FwhInstance) + FwVolHeader->HeaderLength + | |
(sizeof (EFI_FW_VOL_INSTANCE) - sizeof (EFI_FIRMWARE_VOLUME_HEADER)) | |
); | |
} while (TRUE); | |
// | |
// Allocate for scratch space, an intermediate buffer for FVB extention | |
// | |
Status = gBS->AllocatePool ( | |
EfiRuntimeServicesData, | |
MaxLbaSize, | |
&mFvbModuleGlobal->FvbScratchSpace[FVB_PHYSICAL] | |
); | |
ASSERT_EFI_ERROR (Status); | |
mFvbModuleGlobal->FvbScratchSpace[FVB_VIRTUAL] = mFvbModuleGlobal->FvbScratchSpace[FVB_PHYSICAL]; | |
if (InstallSfsNotify) { | |
FvbInstallSfsNotify (); | |
} | |
return EFI_SUCCESS; | |
} |