MdePkg/Include/Protocol/UsbHostController.h - SHIFTPHONES/android/bootable/bootloader/edk2 - Gitiles

 /** @file
   EFI_USB_HC_PROTOCOL as defined in EFI 1.10.

   Copyright (c) 2006, Intel Corporation
   All rights reserved. This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
   which accompanies this distribution.  The full text of the license may be found at
   http://opensource.org/licenses/bsd-license.php

   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

   Module Name:  UsbHostController.h

 **/

 #ifndef _USB_HOSTCONTROLLER_H_
 #define _USB_HOSTCONTROLLER_H_

 #define EFI_USB_HC_PROTOCOL_GUID \
   { \
     0xf5089266, 0x1aa0, 0x4953, {0x97, 0xd8, 0x56, 0x2f, 0x8a, 0x73, 0xb5, 0x19 } \
   }

 //
 // Forward reference for pure ANSI compatability
 //
 typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL;

 //
 // Protocol definitions
 //

 /**
   Provides software reset for the USB host controller.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  Attributes            A bit mask of the reset operation to perform.

   @retval EFI_SUCCESS           The reset operation succeeded.
   @retval EFI_UNSUPPORTED       The type of reset specified by Attributes is not currently supported
                                 by the host controller hardware.
   @retval EFI_INVALID_PARAMETER Attributes is not valid.
   @retval EFI_DEVICE_ERROR      An error was encountered while attempting to perform the reset operation.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_RESET) (
   IN EFI_USB_HC_PROTOCOL     *This,
   IN UINT16                  Attributes
   );

 /**
   Retrieves current state of the USB host controller.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  State                 A pointer to the EFI_USB_HC_STATE data structure that
                                 indicates current state of the USB host controller.

   @retval EFI_SUCCESS           The state information of the host controller was returned in State.
   @retval EFI_INVALID_PARAMETER State is NULL.
   @retval EFI_DEVICE_ERROR      An error was encountered while attempting to retrieve the host controller¡¯s
                                 current state.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_GET_STATE) (
   IN  EFI_USB_HC_PROTOCOL    *This,
   OUT EFI_USB_HC_STATE       *State
   );

 /**
   Sets the USB host controller to a specific state.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  State                 Indicates the state of the host controller that will be set.

   @retval EFI_SUCCESS           The USB host controller was successfully placed in the state specified by
                                 State.
   @retval EFI_INVALID_PARAMETER State is NULL.
   @retval EFI_DEVICE_ERROR      Failed to set the state specified by State due to device error.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_SET_STATE) (
   IN EFI_USB_HC_PROTOCOL     *This,
   IN EFI_USB_HC_STATE        State
   );

 /**
   Submits control transfer to a target USB device.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  DeviceAddress         Represents the address of the target device on the USB, which is
                                 assigned during USB enumeration.
   @param  IsSlowDevice          Indicates whether the target device is slow device or full-speed
                                 device.
   @param  MaximumPacketLength   Indicates the maximum packet size that the default control
                                 transfer endpoint is capable of sending or receiving.
   @param  Request               A pointer to the USB device request that will be sent to the USB
                                 device.
   @param  TransferDirection     Specifies the data direction for the transfer.
   @param  Data                  A pointer to the buffer of data that will be transmitted to USB
                                 device or received from USB device.
   @param  DataLength            On input, indicates the size, in bytes, of the data buffer specified
                                 by Data. On output, indicates the amount of data actually
                                 transferred.
   @param  TimeOut               Indicates the maximum time, in milliseconds, which the transfer
                                 is allowed to complete.
   @param  TransferResult        A pointer to the detailed result information generated by this
                                 control transfer.

   @retval EFI_SUCCESS           The control transfer was completed successfully.
   @retval EFI_OUT_OF_RESOURCES  The control transfer could not be completed due to a lack of resources.
   @retval EFI_INVALID_PARAMETER Some parameters are invalid.
   @retval EFI_TIMEOUT           The control transfer failed due to timeout.
   @retval EFI_DEVICE_ERROR      The control transfer failed due to host controller or device error.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER) (
   IN     EFI_USB_HC_PROTOCOL       *This,
   IN     UINT8                     DeviceAddress,
   IN     BOOLEAN                   IsSlowDevice,
   IN     UINT8                     MaximumPacketLength,
   IN     EFI_USB_DEVICE_REQUEST    *Request,
   IN     EFI_USB_DATA_DIRECTION    TransferDirection,
   IN OUT VOID                      *Data       OPTIONAL,
   IN OUT UINTN                     *DataLength OPTIONAL,
   IN     UINTN                     TimeOut,
   OUT    UINT32                    *TransferResult
   );

 /**
   Submits bulk transfer to a bulk endpoint of a USB device.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  DeviceAddress         Represents the address of the target device on the USB, which is
                                 assigned during USB enumeration.
   @param  EndPointAddress       The combination of an endpoint number and an endpoint
                                 direction of the target USB device.
   @param  MaximumPacketLength   Indicates the maximum packet size that the default control
                                 transfer endpoint is capable of sending or receiving.
   @param  Data                  A pointer to the buffer of data that will be transmitted to USB
                                 device or received from USB device.
   @param  DataLength            On input, indicates the size, in bytes, of the data buffer specified
                                 by Data. On output, indicates the amount of data actually
                                 transferred.
   @param  DataToggle            A pointer to the data toggle value.
   @param  TimeOut               Indicates the maximum time, in milliseconds, which the transfer
                                 is allowed to complete.
   @param  TransferResult        A pointer to the detailed result information of the bulk transfer.

   @retval EFI_SUCCESS           The bulk transfer was completed successfully.
   @retval EFI_OUT_OF_RESOURCES  The bulk transfer could not be completed due to a lack of resources.
   @retval EFI_INVALID_PARAMETER Some parameters are invalid.
   @retval EFI_TIMEOUT           The bulk transfer failed due to timeout.
   @retval EFI_DEVICE_ERROR      The bulk transfer failed due to host controller or device error.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_BULK_TRANSFER) (
   IN     EFI_USB_HC_PROTOCOL    *This,
   IN     UINT8                  DeviceAddress,
   IN     UINT8                  EndPointAddress,
   IN     UINT8                  MaximumPacketLength,
   IN OUT VOID                   *Data,
   IN OUT UINTN                  *DataLength,
   IN OUT UINT8                  *DataToggle,
   IN     UINTN                  TimeOut,
   OUT    UINT32                 *TransferResult
   );

 /**
   Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  DeviceAddress         Represents the address of the target device on the USB, which is
                                 assigned during USB enumeration.
   @param  EndPointAddress       The combination of an endpoint number and an endpoint
                                 direction of the target USB device.
   @param  IsSlowDevice          Indicates whether the target device is slow device or full-speed
                                 device.
   @param  MaximumPacketLength   Indicates the maximum packet size that the default control
                                 transfer endpoint is capable of sending or receiving.
   @param  IsNewTransfer         If TRUE, an asynchronous interrupt pipe is built between the host
                                 and the target interrupt endpoint. If FALSE, the specified

   @param  DataToggle            A pointer to the data toggle value.
   @param  PollingInterval       Indicates the interval, in milliseconds, that the asynchronous
                                 interrupt transfer is polled.                                                                                                      asynchronous interrupt pipe is canceled.
   @param  DataLength            Indicates the length of data to be received at the rate specified by
                                 PollingInterval from the target asynchronous interrupt
                                 endpoint.
   @param  CallBackFunction      The Callback function.
   @param  Context               The context that is passed to the CallBackFunction.

   @retval EFI_SUCCESS           The asynchronous interrupt transfer request has been successfully
                                 submitted or canceled.
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
   @retval EFI_INVALID_PARAMETER Some parameters are invalid.
   @retval EFI_TIMEOUT           The bulk transfer failed due to timeout.
   @retval EFI_DEVICE_ERROR      The bulk transfer failed due to host controller or device error.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER) (
   IN     EFI_USB_HC_PROTOCOL                                 *This,
   IN     UINT8                                               DeviceAddress,
   IN     UINT8                                               EndPointAddress,
   IN     BOOLEAN                                             IsSlowDevice,
   IN     UINT8                                               MaxiumPacketLength,
   IN     BOOLEAN                                             IsNewTransfer,
   IN OUT UINT8                                               *DataToggle,
   IN     UINTN                                               PollingInterval  OPTIONAL,
   IN     UINTN                                               DataLength       OPTIONAL,
   IN     EFI_ASYNC_USB_TRANSFER_CALLBACK                     CallBackFunction OPTIONAL,
   IN     VOID                                                *Context         OPTIONAL
   );

 /**
   Submits synchronous interrupt transfer to an interrupt endpoint of a USB device.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  DeviceAddress         Represents the address of the target device on the USB, which is
                                 assigned during USB enumeration.
   @param  EndPointAddress       The combination of an endpoint number and an endpoint
                                 direction of the target USB device.
   @param  IsSlowDevice          Indicates whether the target device is slow device or full-speed
                                 device.
   @param  MaximumPacketLength   Indicates the maximum packet size that the default control
                                 transfer endpoint is capable of sending or receiving.
   @param  Data                  A pointer to the buffer of data that will be transmitted to USB
                                 device or received from USB device.                                                                                            asynchronous interrupt pipe is canceled.
   @param  DataLength            On input, the size, in bytes, of the data buffer specified by Data.
                                 On output, the number of bytes transferred.
   @param  DataToggle            A pointer to the data toggle value.
   @param  TimeOut               Indicates the maximum time, in milliseconds, which the transfer
                                 is allowed to complete.
   @param  TransferResult        A pointer to the detailed result information from the synchronous
                                 interrupt transfer.

   @retval EFI_SUCCESS           The synchronous interrupt transfer was completed successfully.
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
   @retval EFI_INVALID_PARAMETER Some parameters are invalid.
   @retval EFI_TIMEOUT           The synchronous interrupt transfer failed due to timeout.
   @retval EFI_DEVICE_ERROR      The synchronous interrupt transfer failed due to host controller or device error.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER) (
   IN     EFI_USB_HC_PROTOCOL    *This,
   IN     UINT8                  DeviceAddress,
   IN     UINT8                  EndPointAddress,
   IN     BOOLEAN                IsSlowDevice,
   IN     UINT8                  MaximumPacketLength,
   IN OUT VOID                   *Data,
   IN OUT UINTN                  *DataLength,
   IN OUT UINT8                  *DataToggle,
   IN     UINTN                  TimeOut,
   OUT    UINT32                 *TransferResult
   );

 /**
   Submits isochronous transfer to an isochronous endpoint of a USB device.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  DeviceAddress         Represents the address of the target device on the USB, which is
                                 assigned during USB enumeration.
   @param  EndPointAddress       The combination of an endpoint number and an endpoint
                                 direction of the target USB device.
   @param  MaximumPacketLength   Indicates the maximum packet size that the default control
                                 transfer endpoint is capable of sending or receiving.
   @param  Data                  A pointer to the buffer of data that will be transmitted to USB
                                 device or received from USB device.                                                                                            asynchronous interrupt pipe is canceled.
   @param  DataLength            Specifies the length, in bytes, of the data to be sent to or received
                                 from the USB device.
   @param  TransferResult        A pointer to the detailed result information from the isochronous
                                 transfer.

   @retval EFI_SUCCESS           The isochronous transfer was completed successfully.
   @retval EFI_OUT_OF_RESOURCES  The isochronous could not be completed due to a lack of resources.
   @retval EFI_INVALID_PARAMETER Some parameters are invalid.
   @retval EFI_TIMEOUT           The isochronous transfer failed due to timeout.
   @retval EFI_DEVICE_ERROR      The isochronous transfer failed due to host controller or device error.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER) (
   IN     EFI_USB_HC_PROTOCOL    *This,
   IN     UINT8                  DeviceAddress,
   IN     UINT8                  EndPointAddress,
   IN     UINT8                  MaximumPacketLength,
   IN OUT VOID                   *Data,
   IN     UINTN                  DataLength,
   OUT    UINT32                 *TransferResult
   );

 /**
   Submits nonblocking isochronous transfer to an isochronous endpoint of a USB device.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  DeviceAddress         Represents the address of the target device on the USB, which is
                                 assigned during USB enumeration.
   @param  EndPointAddress       The combination of an endpoint number and an endpoint
                                 direction of the target USB device.
   @param  MaximumPacketLength   Indicates the maximum packet size that the default control
                                 transfer endpoint is capable of sending or receiving.
   @param  Data                  A pointer to the buffer of data that will be transmitted to USB
                                 device or received from USB device.                                                                                            asynchronous interrupt pipe is canceled.
   @param  DataLength            Specifies the length, in bytes, of the data to be sent to or received
                                 from the USB device.
   @param  IsochronousCallback   The Callback function.
   @param  Context               Data passed to the IsochronousCallback function. This is
                                 an optional parameter and may be NULL.

   @retval EFI_SUCCESS           The asynchronous isochronous transfer was completed successfully.
   @retval EFI_OUT_OF_RESOURCES  The asynchronous isochronous could not be completed due to a lack of resources.
   @retval EFI_INVALID_PARAMETER Some parameters are invalid.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER) (
   IN     EFI_USB_HC_PROTOCOL                *This,
   IN     UINT8                              DeviceAddress,
   IN     UINT8                              EndPointAddress,
   IN     UINT8                              MaximumPacketLength,
   IN OUT VOID                               *Data,
   IN     UINTN                              DataLength,
   IN     EFI_ASYNC_USB_TRANSFER_CALLBACK    IsochronousCallBack,
   IN     VOID                               *Context OPTIONAL
   );

 /**
   Retrieves the number of root hub ports.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  PortNumber            A pointer to the number of the root hub ports.

   @retval EFI_SUCCESS           The port number was retrieved successfully.
   @retval EFI_DEVICE_ERROR      An error was encountered while attempting to retrieve the port number.
   @retval EFI_INVALID_PARAMETER PortNumber is NULL.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER) (
   IN EFI_USB_HC_PROTOCOL    *This,
   OUT UINT8                 *PortNumber
   );

 /**
   Retrieves the current status of a USB root hub port.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  PortNumber            Specifies the root hub port from which the status is to be retrieved.
                                 This value is zero based.
   @param  PortStatus            A pointer to the current port status bits and port status change bits.

   @retval EFI_SUCCESS           The status of the USB root hub port specified by PortNumber
                                 was returned in PortStatus.
   @retval EFI_INVALID_PARAMETER PortNumber is invalid.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS) (
   IN EFI_USB_HC_PROTOCOL     *This,
   IN  UINT8                  PortNumber,
   OUT EFI_USB_PORT_STATUS    *PortStatus
   );

 /**
   Sets a feature for the specified root hub port.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  PortNumber            Specifies the root hub port from which the status is to be retrieved.
                                 This value is zero based.
   @param  PortFeature           Indicates the feature selector associated with the feature set
                                 request.

   @retval EFI_SUCCESS           The feature specified by PortFeature was set for the USB
                                 root hub port specified by PortNumber.
   @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE) (
   IN EFI_USB_HC_PROTOCOL     *This,
   IN UINT8                   PortNumber,
   IN EFI_USB_PORT_FEATURE    PortFeature
   );

 /**
   Clears a feature for the specified root hub port.

   @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
   @param  PortNumber            Specifies the root hub port from which the status is to be cleared.
                                 This value is zero based.
   @param  PortFeature           Indicates the feature selector associated with the feature clear
                                 request.

   @retval EFI_SUCCESS           The feature specified by PortFeature was cleared for the USB
                                 root hub port specified by PortNumber.
   @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE) (
   IN EFI_USB_HC_PROTOCOL     *This,
   IN UINT8                   PortNumber,
   IN EFI_USB_PORT_FEATURE    PortFeature
   );

 struct _EFI_USB_HC_PROTOCOL {
   EFI_USB_HC_PROTOCOL_RESET                       Reset;
   EFI_USB_HC_PROTOCOL_GET_STATE                   GetState;
   EFI_USB_HC_PROTOCOL_SET_STATE                   SetState;
   EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER            ControlTransfer;
   EFI_USB_HC_PROTOCOL_BULK_TRANSFER               BulkTransfer;
   EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER    AsyncInterruptTransfer;
   EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER     SyncInterruptTransfer;
   EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER        IsochronousTransfer;
   EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER  AsyncIsochronousTransfer;
   EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER     GetRootHubPortNumber;
   EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS     GetRootHubPortStatus;
   EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE    SetRootHubPortFeature;
   EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE  ClearRootHubPortFeature;
   UINT16                                          MajorRevision;
   UINT16                                          MinorRevision;
 };

 extern EFI_GUID gEfiUsbHcProtocolGuid;

 #endif
	/** @file
	EFI_USB_HC_PROTOCOL as defined in EFI 1.10.

	Copyright (c) 2006, Intel Corporation
	All rights reserved. This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	Module Name: UsbHostController.h

	**/

	#ifndef _USB_HOSTCONTROLLER_H_
	#define _USB_HOSTCONTROLLER_H_

	#define EFI_USB_HC_PROTOCOL_GUID \
	{ \
	0xf5089266, 0x1aa0, 0x4953, {0x97, 0xd8, 0x56, 0x2f, 0x8a, 0x73, 0xb5, 0x19 } \
	}

	//
	// Forward reference for pure ANSI compatability
	//
	typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL;

	//
	// Protocol definitions
	//

	/**
	Provides software reset for the USB host controller.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param Attributes A bit mask of the reset operation to perform.

	@retval EFI_SUCCESS The reset operation succeeded.
	@retval EFI_UNSUPPORTED The type of reset specified by Attributes is not currently supported
	by the host controller hardware.
	@retval EFI_INVALID_PARAMETER Attributes is not valid.
	@retval EFI_DEVICE_ERROR An error was encountered while attempting to perform the reset operation.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_RESET) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT16 Attributes
	);

	/**
	Retrieves current state of the USB host controller.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param State A pointer to the EFI_USB_HC_STATE data structure that
	indicates current state of the USB host controller.

	@retval EFI_SUCCESS The state information of the host controller was returned in State.
	@retval EFI_INVALID_PARAMETER State is NULL.
	@retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the host controller¡¯s
	current state.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_GET_STATE) (
	IN EFI_USB_HC_PROTOCOL *This,
	OUT EFI_USB_HC_STATE *State
	);

	/**
	Sets the USB host controller to a specific state.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param State Indicates the state of the host controller that will be set.

	@retval EFI_SUCCESS The USB host controller was successfully placed in the state specified by
	State.
	@retval EFI_INVALID_PARAMETER State is NULL.
	@retval EFI_DEVICE_ERROR Failed to set the state specified by State due to device error.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_SET_STATE) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN EFI_USB_HC_STATE State
	);

	/**
	Submits control transfer to a target USB device.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param DeviceAddress Represents the address of the target device on the USB, which is
	assigned during USB enumeration.
	@param IsSlowDevice Indicates whether the target device is slow device or full-speed
	device.
	@param MaximumPacketLength Indicates the maximum packet size that the default control
	transfer endpoint is capable of sending or receiving.
	@param Request A pointer to the USB device request that will be sent to the USB
	device.
	@param TransferDirection Specifies the data direction for the transfer.
	@param Data A pointer to the buffer of data that will be transmitted to USB
	device or received from USB device.
	@param DataLength On input, indicates the size, in bytes, of the data buffer specified
	by Data. On output, indicates the amount of data actually
	transferred.
	@param TimeOut Indicates the maximum time, in milliseconds, which the transfer
	is allowed to complete.
	@param TransferResult A pointer to the detailed result information generated by this
	control transfer.

	@retval EFI_SUCCESS The control transfer was completed successfully.
	@retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.
	@retval EFI_INVALID_PARAMETER Some parameters are invalid.
	@retval EFI_TIMEOUT The control transfer failed due to timeout.
	@retval EFI_DEVICE_ERROR The control transfer failed due to host controller or device error.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 DeviceAddress,
	IN BOOLEAN IsSlowDevice,
	IN UINT8 MaximumPacketLength,
	IN EFI_USB_DEVICE_REQUEST *Request,
	IN EFI_USB_DATA_DIRECTION TransferDirection,
	IN OUT VOID *Data OPTIONAL,
	IN OUT UINTN *DataLength OPTIONAL,
	IN UINTN TimeOut,
	OUT UINT32 *TransferResult
	);

	/**
	Submits bulk transfer to a bulk endpoint of a USB device.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param DeviceAddress Represents the address of the target device on the USB, which is
	assigned during USB enumeration.
	@param EndPointAddress The combination of an endpoint number and an endpoint
	direction of the target USB device.
	@param MaximumPacketLength Indicates the maximum packet size that the default control
	transfer endpoint is capable of sending or receiving.
	@param Data A pointer to the buffer of data that will be transmitted to USB
	device or received from USB device.
	@param DataLength On input, indicates the size, in bytes, of the data buffer specified
	by Data. On output, indicates the amount of data actually
	transferred.
	@param DataToggle A pointer to the data toggle value.
	@param TimeOut Indicates the maximum time, in milliseconds, which the transfer
	is allowed to complete.
	@param TransferResult A pointer to the detailed result information of the bulk transfer.

	@retval EFI_SUCCESS The bulk transfer was completed successfully.
	@retval EFI_OUT_OF_RESOURCES The bulk transfer could not be completed due to a lack of resources.
	@retval EFI_INVALID_PARAMETER Some parameters are invalid.
	@retval EFI_TIMEOUT The bulk transfer failed due to timeout.
	@retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_BULK_TRANSFER) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 DeviceAddress,
	IN UINT8 EndPointAddress,
	IN UINT8 MaximumPacketLength,
	IN OUT VOID *Data,
	IN OUT UINTN *DataLength,
	IN OUT UINT8 *DataToggle,
	IN UINTN TimeOut,
	OUT UINT32 *TransferResult
	);

	/**
	Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param DeviceAddress Represents the address of the target device on the USB, which is
	assigned during USB enumeration.
	@param EndPointAddress The combination of an endpoint number and an endpoint
	direction of the target USB device.
	@param IsSlowDevice Indicates whether the target device is slow device or full-speed
	device.
	@param MaximumPacketLength Indicates the maximum packet size that the default control
	transfer endpoint is capable of sending or receiving.
	@param IsNewTransfer If TRUE, an asynchronous interrupt pipe is built between the host
	and the target interrupt endpoint. If FALSE, the specified

	@param DataToggle A pointer to the data toggle value.
	@param PollingInterval Indicates the interval, in milliseconds, that the asynchronous
	interrupt transfer is polled. asynchronous interrupt pipe is canceled.
	@param DataLength Indicates the length of data to be received at the rate specified by
	PollingInterval from the target asynchronous interrupt
	endpoint.
	@param CallBackFunction The Callback function.
	@param Context The context that is passed to the CallBackFunction.

	@retval EFI_SUCCESS The asynchronous interrupt transfer request has been successfully
	submitted or canceled.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	@retval EFI_INVALID_PARAMETER Some parameters are invalid.
	@retval EFI_TIMEOUT The bulk transfer failed due to timeout.
	@retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 DeviceAddress,
	IN UINT8 EndPointAddress,
	IN BOOLEAN IsSlowDevice,
	IN UINT8 MaxiumPacketLength,
	IN BOOLEAN IsNewTransfer,
	IN OUT UINT8 *DataToggle,
	IN UINTN PollingInterval OPTIONAL,
	IN UINTN DataLength OPTIONAL,
	IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL,
	IN VOID *Context OPTIONAL
	);

	/**
	Submits synchronous interrupt transfer to an interrupt endpoint of a USB device.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param DeviceAddress Represents the address of the target device on the USB, which is
	assigned during USB enumeration.
	@param EndPointAddress The combination of an endpoint number and an endpoint
	direction of the target USB device.
	@param IsSlowDevice Indicates whether the target device is slow device or full-speed
	device.
	@param MaximumPacketLength Indicates the maximum packet size that the default control
	transfer endpoint is capable of sending or receiving.
	@param Data A pointer to the buffer of data that will be transmitted to USB
	device or received from USB device. asynchronous interrupt pipe is canceled.
	@param DataLength On input, the size, in bytes, of the data buffer specified by Data.
	On output, the number of bytes transferred.
	@param DataToggle A pointer to the data toggle value.
	@param TimeOut Indicates the maximum time, in milliseconds, which the transfer
	is allowed to complete.
	@param TransferResult A pointer to the detailed result information from the synchronous
	interrupt transfer.

	@retval EFI_SUCCESS The synchronous interrupt transfer was completed successfully.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	@retval EFI_INVALID_PARAMETER Some parameters are invalid.
	@retval EFI_TIMEOUT The synchronous interrupt transfer failed due to timeout.
	@retval EFI_DEVICE_ERROR The synchronous interrupt transfer failed due to host controller or device error.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 DeviceAddress,
	IN UINT8 EndPointAddress,
	IN BOOLEAN IsSlowDevice,
	IN UINT8 MaximumPacketLength,
	IN OUT VOID *Data,
	IN OUT UINTN *DataLength,
	IN OUT UINT8 *DataToggle,
	IN UINTN TimeOut,
	OUT UINT32 *TransferResult
	);

	/**
	Submits isochronous transfer to an isochronous endpoint of a USB device.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param DeviceAddress Represents the address of the target device on the USB, which is
	assigned during USB enumeration.
	@param EndPointAddress The combination of an endpoint number and an endpoint
	direction of the target USB device.
	@param MaximumPacketLength Indicates the maximum packet size that the default control
	transfer endpoint is capable of sending or receiving.
	@param Data A pointer to the buffer of data that will be transmitted to USB
	device or received from USB device. asynchronous interrupt pipe is canceled.
	@param DataLength Specifies the length, in bytes, of the data to be sent to or received
	from the USB device.
	@param TransferResult A pointer to the detailed result information from the isochronous
	transfer.

	@retval EFI_SUCCESS The isochronous transfer was completed successfully.
	@retval EFI_OUT_OF_RESOURCES The isochronous could not be completed due to a lack of resources.
	@retval EFI_INVALID_PARAMETER Some parameters are invalid.
	@retval EFI_TIMEOUT The isochronous transfer failed due to timeout.
	@retval EFI_DEVICE_ERROR The isochronous transfer failed due to host controller or device error.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 DeviceAddress,
	IN UINT8 EndPointAddress,
	IN UINT8 MaximumPacketLength,
	IN OUT VOID *Data,
	IN UINTN DataLength,
	OUT UINT32 *TransferResult
	);

	/**
	Submits nonblocking isochronous transfer to an isochronous endpoint of a USB device.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param DeviceAddress Represents the address of the target device on the USB, which is
	assigned during USB enumeration.
	@param EndPointAddress The combination of an endpoint number and an endpoint
	direction of the target USB device.
	@param MaximumPacketLength Indicates the maximum packet size that the default control
	transfer endpoint is capable of sending or receiving.
	@param Data A pointer to the buffer of data that will be transmitted to USB
	device or received from USB device. asynchronous interrupt pipe is canceled.
	@param DataLength Specifies the length, in bytes, of the data to be sent to or received
	from the USB device.
	@param IsochronousCallback The Callback function.
	@param Context Data passed to the IsochronousCallback function. This is
	an optional parameter and may be NULL.

	@retval EFI_SUCCESS The asynchronous isochronous transfer was completed successfully.
	@retval EFI_OUT_OF_RESOURCES The asynchronous isochronous could not be completed due to a lack of resources.
	@retval EFI_INVALID_PARAMETER Some parameters are invalid.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 DeviceAddress,
	IN UINT8 EndPointAddress,
	IN UINT8 MaximumPacketLength,
	IN OUT VOID *Data,
	IN UINTN DataLength,
	IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,
	IN VOID *Context OPTIONAL
	);

	/**
	Retrieves the number of root hub ports.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param PortNumber A pointer to the number of the root hub ports.

	@retval EFI_SUCCESS The port number was retrieved successfully.
	@retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the port number.
	@retval EFI_INVALID_PARAMETER PortNumber is NULL.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER) (
	IN EFI_USB_HC_PROTOCOL *This,
	OUT UINT8 *PortNumber
	);

	/**
	Retrieves the current status of a USB root hub port.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param PortNumber Specifies the root hub port from which the status is to be retrieved.
	This value is zero based.
	@param PortStatus A pointer to the current port status bits and port status change bits.

	@retval EFI_SUCCESS The status of the USB root hub port specified by PortNumber
	was returned in PortStatus.
	@retval EFI_INVALID_PARAMETER PortNumber is invalid.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 PortNumber,
	OUT EFI_USB_PORT_STATUS *PortStatus
	);

	/**
	Sets a feature for the specified root hub port.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param PortNumber Specifies the root hub port from which the status is to be retrieved.
	This value is zero based.
	@param PortFeature Indicates the feature selector associated with the feature set
	request.

	@retval EFI_SUCCESS The feature specified by PortFeature was set for the USB
	root hub port specified by PortNumber.
	@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 PortNumber,
	IN EFI_USB_PORT_FEATURE PortFeature
	);

	/**
	Clears a feature for the specified root hub port.

	@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
	@param PortNumber Specifies the root hub port from which the status is to be cleared.
	This value is zero based.
	@param PortFeature Indicates the feature selector associated with the feature clear
	request.

	@retval EFI_SUCCESS The feature specified by PortFeature was cleared for the USB
	root hub port specified by PortNumber.
	@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE) (
	IN EFI_USB_HC_PROTOCOL *This,
	IN UINT8 PortNumber,
	IN EFI_USB_PORT_FEATURE PortFeature
	);

	struct _EFI_USB_HC_PROTOCOL {
	EFI_USB_HC_PROTOCOL_RESET Reset;
	EFI_USB_HC_PROTOCOL_GET_STATE GetState;
	EFI_USB_HC_PROTOCOL_SET_STATE SetState;
	EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER ControlTransfer;
	EFI_USB_HC_PROTOCOL_BULK_TRANSFER BulkTransfer;
	EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER AsyncInterruptTransfer;
	EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER SyncInterruptTransfer;
	EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER IsochronousTransfer;
	EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER AsyncIsochronousTransfer;
	EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber;
	EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;
	EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;
	EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;
	UINT16 MajorRevision;
	UINT16 MinorRevision;
	};

	extern EFI_GUID gEfiUsbHcProtocolGuid;

	#endif