Gitiles
Code Review Sign In
review.shift-gmbh.com / SHIFTPHONES / android / bootable / bootloader / edk2 / 7d49ced0cf64fbb3abf6b4d97dac4806bd1d9ee6 / . / MdePkg / Library / DxePciLibEsal / PciLib.c
blob: 8cc1a506f85a78aad299747b83dacfe2529afffb [file] [log] [blame]
/** @file
DXE PCI Library instance layered on top of ESAL services.
Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiDxe.h>
#include <Protocol/ExtendedSalServiceClasses.h>
#include <Library/PciLib.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/ExtendedSalLib.h>
/**
Assert the validity of a PCI address. A valid PCI address should contain 1's
only in the low 28 bits.
@param A The address to validate.
@param M Additional bits to assert to be zero.
**/
#define ASSERT_INVALID_PCI_ADDRESS(A,M) \
ASSERT (((A) & (~0xfffffff | (M))) == 0)
/**
Converts a PCI Library Address to a ESAL PCI Service Address.
Based on SAL Spec 3.2, there are two SAL PCI Address:
If address type = 0
Bits 0..7 - Register address
Bits 8..10 - Function number
Bits 11..15 - Device number
Bits 16..23 - Bus number
Bits 24..31 - PCI segment group
Bits 32..63 - Reserved (0)
If address type = 1
Bits 0..7 - Register address
Bits 8..11 - Extended Register address
Bits 12..14 - Function number
Bits 15..19 - Device number
Bits 20..27 - Bus number
Bits 28..43 - PCI segment group
Bits 44..63 - Reserved (0)
@param A The PCI Library Address to convert.
**/
#define CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS0(Address) ((((Address) >> 4) & 0x00ffff00) | ((Address) & 0xff))
#define CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS1(Address) (Address)
/**
Check a PCI Library Address is a PCI Compatible Address or not.
**/
#define IS_PCI_COMPATIBLE_ADDRESS(Address) (((Address) & 0xf00) == 0)
/**
Internal worker function to read a PCI configuration register.
This function wraps EsalPciConfigRead function of Extended SAL PCI
Services Class.
It reads and returns the PCI configuration register specified by Address,
the width of data is specified by Width.
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param Width Width of data to read
@return The value read from the PCI configuration register.
**/
UINT32
DxePciLibEsalReadWorker (
IN UINTN Address,
IN UINTN Width
)
{
SAL_RETURN_REGS Return;
if (IS_PCI_COMPATIBLE_ADDRESS(Address)) {
Return = EsalCall (
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
SalPciConfigReadFunctionId,
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS0 (Address),
Width,
EFI_SAL_PCI_COMPATIBLE_ADDRESS,
0,
0,
0,
0
);
} else {
Return = EsalCall (
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
SalPciConfigReadFunctionId,
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS1 (Address),
Width,
EFI_SAL_PCI_EXTENDED_REGISTER_ADDRESS,
0,
0,
0,
0
);
}
return (UINT32) Return.r9;
}
/**
Internal worker function to writes a PCI configuration register.
This function wraps EsalPciConfigWrite function of Extended SAL PCI
Services Class.
It writes the PCI configuration register specified by Address with the
value specified by Data. The width of data is specifed by Width.
Data is returned.
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param Width Width of data to write
@param Data The value to write.
@return The value written to the PCI configuration register.
**/
UINT32
DxePciLibEsalWriteWorker (
IN UINTN Address,
IN UINTN Width,
IN UINT32 Data
)
{
if (IS_PCI_COMPATIBLE_ADDRESS(Address)) {
EsalCall (
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
SalPciConfigWriteFunctionId,
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS0 (Address),
Width,
Data,
EFI_SAL_PCI_COMPATIBLE_ADDRESS,
0,
0,
0
);
} else {
EsalCall (
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
SalPciConfigWriteFunctionId,
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS1 (Address),
Width,
Data,
EFI_SAL_PCI_EXTENDED_REGISTER_ADDRESS,
0,
0,
0
);
}
return Data;
}
/**
Register a PCI device so PCI configuration registers may be accessed after
SetVirtualAddressMap().
If Address > 0x0FFFFFFF, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@retval RETURN_SUCCESS The PCI device was registered for runtime access.
@retval RETURN_UNSUPPORTED An attempt was made to call this function
after ExitBootServices().
@retval RETURN_UNSUPPORTED The resources required to access the PCI device
at runtime could not be mapped.
@retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
complete the registration.
**/
RETURN_STATUS
EFIAPI
PciRegisterForRuntimeAccess (
IN UINTN Address
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
return RETURN_SUCCESS;
}
/**
Reads an 8-bit PCI configuration register.
Reads and returns the 8-bit PCI configuration register specified by Address.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@return The value read from the PCI configuration register.
**/
UINT8
EFIAPI
PciRead8 (
IN UINTN Address
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
return (UINT8) DxePciLibEsalReadWorker (Address, 1);
}
/**
Writes an 8-bit PCI configuration register.
Writes the 8-bit PCI configuration register specified by Address with the
value specified by Value. Value is returned. This function must guarantee
that all PCI read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param Data The value to write.
@return The value written to the PCI configuration register.
**/
UINT8
EFIAPI
PciWrite8 (
IN UINTN Address,
IN UINT8 Data
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
return (UINT8) DxePciLibEsalWriteWorker (Address, 1, Data);
}
/**
Performs a bitwise OR of an 8-bit PCI configuration register with
an 8-bit value.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 8-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciOr8 (
IN UINTN Address,
IN UINT8 OrData
)
{
return PciWrite8 (Address, (UINT8)(PciRead8 (Address) | OrData));
}
/**
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
value.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 8-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciAnd8 (
IN UINTN Address,
IN UINT8 AndData
)
{
return PciWrite8 (Address, (UINT8)(PciRead8 (Address) & AndData));
}
/**
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
value, followed a bitwise OR with another 8-bit value.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 8-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciAndThenOr8 (
IN UINTN Address,
IN UINT8 AndData,
IN UINT8 OrData
)
{
return PciWrite8 (Address, (UINT8)((PciRead8 (Address) & AndData) | OrData));
}
/**
Reads a bit field of a PCI configuration register.
Reads the bit field in an 8-bit PCI configuration register. The bit field is
specified by the StartBit and the EndBit. The value of the bit field is
returned.
If Address > 0x0FFFFFFF, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to read.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@return The value of the bit field read from the PCI configuration register.
**/
UINT8
EFIAPI
PciBitFieldRead8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit
)
{
return BitFieldRead8 (PciRead8 (Address), StartBit, EndBit);
}
/**
Writes a bit field to a PCI configuration register.
Writes Value to the bit field of the PCI configuration register. The bit
field is specified by the StartBit and the EndBit. All other bits in the
destination PCI configuration register are preserved. The new value of the
8-bit register is returned.
If Address > 0x0FFFFFFF, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param Value New value of the bit field.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciBitFieldWrite8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 Value
)
{
return PciWrite8 (
Address,
BitFieldWrite8 (PciRead8 (Address), StartBit, EndBit, Value)
);
}
/**
Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
writes the result back to the bit field in the 8-bit port.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 8-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized. Extra left bits in OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciBitFieldOr8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 OrData
)
{
return PciWrite8 (
Address,
BitFieldOr8 (PciRead8 (Address), StartBit, EndBit, OrData)
);
}
/**
Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
AND, and writes the result back to the bit field in the 8-bit register.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 8-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized. Extra left bits in AndData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciBitFieldAnd8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 AndData
)
{
return PciWrite8 (
Address,
BitFieldAnd8 (PciRead8 (Address), StartBit, EndBit, AndData)
);
}
/**
Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
bitwise OR, and writes the result back to the bit field in the
8-bit port.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND followed by a bitwise OR between the read result and
the value specified by AndData, and writes the result to the 8-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized. Extra left bits in both AndData and
OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciBitFieldAndThenOr8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 AndData,
IN UINT8 OrData
)
{
return PciWrite8 (
Address,
BitFieldAndThenOr8 (PciRead8 (Address), StartBit, EndBit, AndData, OrData)
);
}
/**
Reads a 16-bit PCI configuration register.
Reads and returns the 16-bit PCI configuration register specified by Address.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@return The value read from the PCI configuration register.
**/
UINT16
EFIAPI
PciRead16 (
IN UINTN Address
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
return (UINT16) DxePciLibEsalReadWorker (Address, 2);
}
/**
Writes a 16-bit PCI configuration register.
Writes the 16-bit PCI configuration register specified by Address with the
value specified by Value. Value is returned. This function must guarantee
that all PCI read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param Data The value to write.
@return The value written to the PCI configuration register.
**/
UINT16
EFIAPI
PciWrite16 (
IN UINTN Address,
IN UINT16 Data
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
return (UINT16) DxePciLibEsalWriteWorker (Address, 2, Data);
}
/**
Performs a bitwise OR of a 16-bit PCI configuration register with
a 16-bit value.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 16-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciOr16 (
IN UINTN Address,
IN UINT16 OrData
)
{
return PciWrite16 (Address, (UINT16)(PciRead16 (Address) | OrData));
}
/**
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
value.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 16-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciAnd16 (
IN UINTN Address,
IN UINT16 AndData
)
{
return PciWrite16 (Address, (UINT16)(PciRead16 (Address) & AndData));
}
/**
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
value, followed a bitwise OR with another 16-bit value.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 16-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciAndThenOr16 (
IN UINTN Address,
IN UINT16 AndData,
IN UINT16 OrData
)
{
return PciWrite16 (Address, (UINT16)((PciRead16 (Address) & AndData) | OrData));
}
/**
Reads a bit field of a PCI configuration register.
Reads the bit field in a 16-bit PCI configuration register. The bit field is
specified by the StartBit and the EndBit. The value of the bit field is
returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to read.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@return The value of the bit field read from the PCI configuration register.
**/
UINT16
EFIAPI
PciBitFieldRead16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit
)
{
return BitFieldRead16 (PciRead16 (Address), StartBit, EndBit);
}
/**
Writes a bit field to a PCI configuration register.
Writes Value to the bit field of the PCI configuration register. The bit
field is specified by the StartBit and the EndBit. All other bits in the
destination PCI configuration register are preserved. The new value of the
16-bit register is returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param Value New value of the bit field.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciBitFieldWrite16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 Value
)
{
return PciWrite16 (
Address,
BitFieldWrite16 (PciRead16 (Address), StartBit, EndBit, Value)
);
}
/**
Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
writes the result back to the bit field in the 16-bit port.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 16-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized. Extra left bits in OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciBitFieldOr16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 OrData
)
{
return PciWrite16 (
Address,
BitFieldOr16 (PciRead16 (Address), StartBit, EndBit, OrData)
);
}
/**
Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
AND, and writes the result back to the bit field in the 16-bit register.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 16-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized. Extra left bits in AndData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciBitFieldAnd16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 AndData
)
{
return PciWrite16 (
Address,
BitFieldAnd16 (PciRead16 (Address), StartBit, EndBit, AndData)
);
}
/**
Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
bitwise OR, and writes the result back to the bit field in the
16-bit port.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND followed by a bitwise OR between the read result and
the value specified by AndData, and writes the result to the 16-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized. Extra left bits in both AndData and
OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciBitFieldAndThenOr16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 AndData,
IN UINT16 OrData
)
{
return PciWrite16 (
Address,
BitFieldAndThenOr16 (PciRead16 (Address), StartBit, EndBit, AndData, OrData)
);
}
/**
Reads a 32-bit PCI configuration register.
Reads and returns the 32-bit PCI configuration register specified by Address.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@return The value read from the PCI configuration register.
**/
UINT32
EFIAPI
PciRead32 (
IN UINTN Address
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
return DxePciLibEsalReadWorker (Address, 4);
}
/**
Writes a 32-bit PCI configuration register.
Writes the 32-bit PCI configuration register specified by Address with the
value specified by Value. Value is returned. This function must guarantee
that all PCI read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param Data The value to write.
@return The value written to the PCI configuration register.
**/
UINT32
EFIAPI
PciWrite32 (
IN UINTN Address,
IN UINT32 Data
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
return DxePciLibEsalWriteWorker (Address, 4, Data);
}
/**
Performs a bitwise OR of a 32-bit PCI configuration register with
a 32-bit value.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 32-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciOr32 (
IN UINTN Address,
IN UINT32 OrData
)
{
return PciWrite32 (Address, PciRead32 (Address) | OrData);
}
/**
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
value.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 32-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciAnd32 (
IN UINTN Address,
IN UINT32 AndData
)
{
return PciWrite32 (Address, PciRead32 (Address) & AndData);
}
/**
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
value, followed a bitwise OR with another 32-bit value.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 32-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciAndThenOr32 (
IN UINTN Address,
IN UINT32 AndData,
IN UINT32 OrData
)
{
return PciWrite32 (Address, (PciRead32 (Address) & AndData) | OrData);
}
/**
Reads a bit field of a PCI configuration register.
Reads the bit field in a 32-bit PCI configuration register. The bit field is
specified by the StartBit and the EndBit. The value of the bit field is
returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to read.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@return The value of the bit field read from the PCI configuration register.
**/
UINT32
EFIAPI
PciBitFieldRead32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit
)
{
return BitFieldRead32 (PciRead32 (Address), StartBit, EndBit);
}
/**
Writes a bit field to a PCI configuration register.
Writes Value to the bit field of the PCI configuration register. The bit
field is specified by the StartBit and the EndBit. All other bits in the
destination PCI configuration register are preserved. The new value of the
32-bit register is returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param Value New value of the bit field.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciBitFieldWrite32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 Value
)
{
return PciWrite32 (
Address,
BitFieldWrite32 (PciRead32 (Address), StartBit, EndBit, Value)
);
}
/**
Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
writes the result back to the bit field in the 32-bit port.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 32-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized. Extra left bits in OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciBitFieldOr32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 OrData
)
{
return PciWrite32 (
Address,
BitFieldOr32 (PciRead32 (Address), StartBit, EndBit, OrData)
);
}
/**
Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
AND, and writes the result back to the bit field in the 32-bit register.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 32-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized. Extra left bits in AndData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciBitFieldAnd32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 AndData
)
{
return PciWrite32 (
Address,
BitFieldAnd32 (PciRead32 (Address), StartBit, EndBit, AndData)
);
}
/**
Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
bitwise OR, and writes the result back to the bit field in the
32-bit port.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND followed by a bitwise OR between the read result and
the value specified by AndData, and writes the result to the 32-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized. Extra left bits in both AndData and
OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciBitFieldAndThenOr32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 AndData,
IN UINT32 OrData
)
{
return PciWrite32 (
Address,
BitFieldAndThenOr32 (PciRead32 (Address), StartBit, EndBit, AndData, OrData)
);
}
/**
Reads a range of PCI configuration registers into a caller supplied buffer.
Reads the range of PCI configuration registers specified by StartAddress and
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
If StartAddress > 0x0FFFFFFF, then ASSERT().
If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
If Size > 0 and Buffer is NULL, then ASSERT().
@param StartAddress Starting address that encodes the PCI Bus, Device,
Function and Register.
@param Size Size in bytes of the transfer.
@param Buffer Pointer to a buffer receiving the data read.
@return Size
**/
UINTN
EFIAPI
PciReadBuffer (
IN UINTN StartAddress,
IN UINTN Size,
OUT VOID *Buffer
)
{
UINTN ReturnValue;
ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);
if (Size == 0) {
return Size;
}
ASSERT (Buffer != NULL);
//
// Save Size for return
//
ReturnValue = Size;
if ((StartAddress & 1) != 0) {
//
// Read a byte if StartAddress is byte aligned
//
*(volatile UINT8 *)Buffer = PciRead8 (StartAddress);
StartAddress += sizeof (UINT8);
Size -= sizeof (UINT8);
Buffer = (UINT8*)Buffer + 1;
}
if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
//
// Read a word if StartAddress is word aligned
//
*(volatile UINT16 *)Buffer = PciRead16 (StartAddress);
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
while (Size >= sizeof (UINT32)) {
//
// Read as many double words as possible
//
*(volatile UINT32 *)Buffer = PciRead32 (StartAddress);
StartAddress += sizeof (UINT32);
Size -= sizeof (UINT32);
Buffer = (UINT32*)Buffer + 1;
}
if (Size >= sizeof (UINT16)) {
//
// Read the last remaining word if exist
//
*(volatile UINT16 *)Buffer = PciRead16 (StartAddress);
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
if (Size >= sizeof (UINT8)) {
//
// Read the last remaining byte if exist
//
*(volatile UINT8 *)Buffer = PciRead8 (StartAddress);
}
return ReturnValue;
}
/**
Copies the data in a caller supplied buffer to a specified range of PCI
configuration space.
Writes the range of PCI configuration registers specified by StartAddress and
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
write from StartAdress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
If StartAddress > 0x0FFFFFFF, then ASSERT().
If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
If Size > 0 and Buffer is NULL, then ASSERT().
@param StartAddress Starting address that encodes the PCI Bus, Device,
Function and Register.
@param Size Size in bytes of the transfer.
@param Buffer Pointer to a buffer containing the data to write.
@return Size
**/
UINTN
EFIAPI
PciWriteBuffer (
IN UINTN StartAddress,
IN UINTN Size,
IN VOID *Buffer
)
{
UINTN ReturnValue;
ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);
if (Size == 0) {
return 0;
}
ASSERT (Buffer != NULL);
//
// Save Size for return
//
ReturnValue = Size;
if ((StartAddress & 1) != 0) {
//
// Write a byte if StartAddress is byte aligned
//
PciWrite8 (StartAddress, *(UINT8*)Buffer);
StartAddress += sizeof (UINT8);
Size -= sizeof (UINT8);
Buffer = (UINT8*)Buffer + 1;
}
if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
//
// Write a word if StartAddress is word aligned
//
PciWrite16 (StartAddress, *(UINT16*)Buffer);
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
while (Size >= sizeof (UINT32)) {
//
// Write as many double words as possible
//
PciWrite32 (StartAddress, *(UINT32*)Buffer);
StartAddress += sizeof (UINT32);
Size -= sizeof (UINT32);
Buffer = (UINT32*)Buffer + 1;
}
if (Size >= sizeof (UINT16)) {
//
// Write the last remaining word if exist
//
PciWrite16 (StartAddress, *(UINT16*)Buffer);
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
if (Size >= sizeof (UINT8)) {
//
// Write the last remaining byte if exist
//
PciWrite8 (StartAddress, *(UINT8*)Buffer);
}
return ReturnValue;
}