| /** @file |
| This protocol provides services that allow NVM Express commands to be sent to an |
| NVM Express controller or to a specific namespace in a NVM Express controller. |
| This protocol interface is optimized for storage. |
| |
| Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR> |
| This program and the accompanying materials |
| are licensed and made available under the terms and conditions of the BSD License |
| which accompanies this distribution. The full text of the license may be found at |
| http://opensource.org/licenses/bsd-license.php. |
| |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. |
| |
| **/ |
| |
| #ifndef _UEFI_NVM_EXPRESS_PASS_THRU_H_ |
| #define _UEFI_NVM_EXPRESS_PASS_THRU_H_ |
| |
| #define EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID \ |
| { \ |
| 0x52c78312, 0x8edc, 0x4233, { 0x98, 0xf2, 0x1a, 0x1a, 0xa5, 0xe3, 0x88, 0xa5 } \ |
| } |
| |
| typedef struct _EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL; |
| |
| typedef struct { |
| UINT32 Attributes; |
| UINT32 IoAlign; |
| UINT32 NvmeVersion; |
| } EFI_NVM_EXPRESS_PASS_THRU_MODE; |
| |
| // |
| // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface is |
| // for directly addressable namespaces. |
| // |
| #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001 |
| // |
| // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface is |
| // for a single volume logical namespace comprised of multiple namespaces. |
| // |
| #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002 |
| // |
| // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface |
| // supports non-blocking I/O. |
| // |
| #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004 |
| // |
| // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface |
| // supports NVM command set. |
| // |
| #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_CMD_SET_NVM 0x0008 |
| |
| // |
| // FusedOperation |
| // |
| #define NORMAL_CMD 0x00 |
| #define FUSED_FIRST_CMD 0x01 |
| #define FUSED_SECOND_CMD 0x02 |
| |
| typedef struct { |
| UINT32 Opcode:8; |
| UINT32 FusedOperation:2; |
| UINT32 Reserved:22; |
| } NVME_CDW0; |
| |
| // |
| // Flags |
| // |
| #define CDW2_VALID 0x01 |
| #define CDW3_VALID 0x02 |
| #define CDW10_VALID 0x04 |
| #define CDW11_VALID 0x08 |
| #define CDW12_VALID 0x10 |
| #define CDW13_VALID 0x20 |
| #define CDW14_VALID 0x40 |
| #define CDW15_VALID 0x80 |
| |
| // |
| // Queue Type |
| // |
| #define NVME_ADMIN_QUEUE 0x00 |
| #define NVME_IO_QUEUE 0x01 |
| |
| typedef struct { |
| NVME_CDW0 Cdw0; |
| UINT8 Flags; |
| UINT32 Nsid; |
| UINT32 Cdw2; |
| UINT32 Cdw3; |
| UINT32 Cdw10; |
| UINT32 Cdw11; |
| UINT32 Cdw12; |
| UINT32 Cdw13; |
| UINT32 Cdw14; |
| UINT32 Cdw15; |
| } EFI_NVM_EXPRESS_COMMAND; |
| |
| typedef struct { |
| UINT32 DW0; |
| UINT32 DW1; |
| UINT32 DW2; |
| UINT32 DW3; |
| } EFI_NVM_EXPRESS_COMPLETION; |
| |
| typedef struct { |
| UINT64 CommandTimeout; |
| VOID *TransferBuffer; |
| UINT32 TransferLength; |
| VOID *MetadataBuffer; |
| UINT32 MetadataLength; |
| UINT8 QueueType; |
| EFI_NVM_EXPRESS_COMMAND *NvmeCmd; |
| EFI_NVM_EXPRESS_COMPLETION *NvmeCompletion; |
| } EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET; |
| |
| // |
| // Protocol funtion prototypes |
| // |
| /** |
| Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports |
| both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, and the non-blocking |
| I/O functionality is optional. |
| |
| |
| @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| @param[in] NamespaceId A 32 bit namespace ID as defined in the NVMe specification to which the NVM Express Command |
| Packet will be sent. A value of 0 denotes the NVM Express controller, a value of all 0xFF's |
| (all bytes are 0xFF) in the namespace ID specifies that the command packet should be sent to |
| all valid namespaces. |
| @param[in,out] Packet A pointer to the NVM Express Command Packet. |
| @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking I/O is performed. |
| If Event is NULL, then blocking I/O is performed. If Event is not NULL and non-blocking I/O |
| is supported, then non-blocking I/O is performed, and Event will be signaled when the NVM |
| Express Command Packet completes. |
| |
| @retval EFI_SUCCESS The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred |
| to, or from DataBuffer. |
| @retval EFI_BAD_BUFFER_SIZE The NVM Express Command Packet was not executed. The number of bytes that could be transferred |
| is returned in TransferLength. |
| @retval EFI_NOT_READY The NVM Express Command Packet could not be sent because the controller is not ready. The caller |
| may retry again later. |
| @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the NVM Express Command Packet. |
| @retval EFI_INVALID_PARAMETER NamespaceId or the contents of EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM |
| Express Command Packet was not sent, so no additional status information is available. |
| @retval EFI_UNSUPPORTED The command described by the NVM Express Command Packet is not supported by the NVM Express |
| controller. The NVM Express Command Packet was not sent so no additional status information |
| is available. |
| @retval EFI_TIMEOUT A timeout occurred while waiting for the NVM Express Command Packet to execute. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_PASSTHRU)( |
| IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| IN UINT32 NamespaceId, |
| IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet, |
| IN EFI_EVENT Event OPTIONAL |
| ); |
| |
| /** |
| Used to retrieve the next namespace ID for this NVM Express controller. |
| |
| The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNextNamespace() function retrieves the next valid |
| namespace ID on this NVM Express controller. |
| |
| If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the first valid namespace |
| ID defined on the NVM Express controller is returned in the location pointed to by NamespaceId |
| and a status of EFI_SUCCESS is returned. |
| |
| If on input the value pointed to by NamespaceId is an invalid namespace ID other than 0xFFFFFFFF, |
| then EFI_INVALID_PARAMETER is returned. |
| |
| If on input the value pointed to by NamespaceId is a valid namespace ID, then the next valid |
| namespace ID on the NVM Express controller is returned in the location pointed to by NamespaceId, |
| and EFI_SUCCESS is returned. |
| |
| If the value pointed to by NamespaceId is the namespace ID of the last namespace on the NVM |
| Express controller, then EFI_NOT_FOUND is returned. |
| |
| @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| @param[in,out] NamespaceId On input, a pointer to a legal NamespaceId for an NVM Express |
| namespace present on the NVM Express controller. On output, a |
| pointer to the next NamespaceId of an NVM Express namespace on |
| an NVM Express controller. An input value of 0xFFFFFFFF retrieves |
| the first NamespaceId for an NVM Express namespace present on an |
| NVM Express controller. |
| |
| @retval EFI_SUCCESS The Namespace ID of the next Namespace was returned. |
| @retval EFI_NOT_FOUND There are no more namespaces defined on this controller. |
| @retval EFI_INVALID_PARAMETER NamespaceId is an invalid value other than 0xFFFFFFFF. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_GET_NEXT_NAMESPACE)( |
| IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| IN OUT UINT32 *NamespaceId |
| ); |
| |
| /** |
| Used to allocate and build a device path node for an NVM Express namespace on an NVM Express controller. |
| |
| The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath() function allocates and builds a single device |
| path node for the NVM Express namespace specified by NamespaceId. |
| |
| If the NamespaceId is not valid, then EFI_NOT_FOUND is returned. |
| |
| If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. |
| |
| If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned. |
| |
| Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of DevicePath are |
| initialized to describe the NVM Express namespace specified by NamespaceId, and EFI_SUCCESS is returned. |
| |
| @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| @param[in] NamespaceId The NVM Express namespace ID for which a device path node is to be |
| allocated and built. Caller must set the NamespaceId to zero if the |
| device path node will contain a valid UUID. |
| @param[in,out] DevicePath A pointer to a single device path node that describes the NVM Express |
| namespace specified by NamespaceId. This function is responsible for |
| allocating the buffer DevicePath with the boot service AllocatePool(). |
| It is the caller's responsibility to free DevicePath when the caller |
| is finished with DevicePath. |
| @retval EFI_SUCCESS The device path node that describes the NVM Express namespace specified |
| by NamespaceId was allocated and returned in DevicePath. |
| @retval EFI_NOT_FOUND The NamespaceId is not valid. |
| @retval EFI_INVALID_PARAMETER DevicePath is NULL. |
| @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate the DevicePath node. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_BUILD_DEVICE_PATH)( |
| IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| IN UINT32 NamespaceId, |
| IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath |
| ); |
| |
| /** |
| Used to translate a device path node to a namespace ID. |
| |
| The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNamespace() function determines the namespace ID associated with the |
| namespace described by DevicePath. |
| |
| If DevicePath is a device path node type that the NVM Express Pass Thru driver supports, then the NVM Express |
| Pass Thru driver will attempt to translate the contents DevicePath into a namespace ID. |
| |
| If this translation is successful, then that namespace ID is returned in NamespaceId, and EFI_SUCCESS is returned |
| |
| @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| @param[in] DevicePath A pointer to the device path node that describes an NVM Express namespace on |
| the NVM Express controller. |
| @param[out] NamespaceId The NVM Express namespace ID contained in the device path node. |
| |
| @retval EFI_SUCCESS DevicePath was successfully translated to NamespaceId. |
| @retval EFI_INVALID_PARAMETER If DevicePath or NamespaceId are NULL, then EFI_INVALID_PARAMETER is returned. |
| @retval EFI_UNSUPPORTED If DevicePath is not a device path node type that the NVM Express Pass Thru driver |
| supports, then EFI_UNSUPPORTED is returned. |
| @retval EFI_NOT_FOUND If DevicePath is a device path node type that the NVM Express Pass Thru driver |
| supports, but there is not a valid translation from DevicePath to a namespace ID, |
| then EFI_NOT_FOUND is returned. |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_GET_NAMESPACE)( |
| IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, |
| OUT UINT32 *NamespaceId |
| ); |
| |
| // |
| // Protocol Interface Structure |
| // |
| struct _EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL { |
| EFI_NVM_EXPRESS_PASS_THRU_MODE *Mode; |
| EFI_NVM_EXPRESS_PASS_THRU_PASSTHRU PassThru; |
| EFI_NVM_EXPRESS_PASS_THRU_GET_NEXT_NAMESPACE GetNextNamespace; |
| EFI_NVM_EXPRESS_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath; |
| EFI_NVM_EXPRESS_PASS_THRU_GET_NAMESPACE GetNamespace; |
| }; |
| |
| extern EFI_GUID gEfiNvmExpressPassThruProtocolGuid; |
| |
| #endif |
| |