Luciano Coelho | f5fc0f8 | 2009-08-06 16:25:28 +0300 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of wl1271 |
| 3 | * |
| 4 | * Copyright (C) 2009 Nokia Corporation |
| 5 | * |
| 6 | * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * version 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 20 | * 02110-1301 USA |
| 21 | * |
| 22 | */ |
| 23 | |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/platform_device.h> |
| 26 | #include <linux/crc7.h> |
| 27 | #include <linux/spi/spi.h> |
| 28 | #include <linux/etherdevice.h> |
| 29 | |
| 30 | #include "wl1271.h" |
| 31 | #include "wl1271_reg.h" |
| 32 | #include "wl1271_spi.h" |
| 33 | #include "wl1271_acx.h" |
| 34 | #include "wl12xx_80211.h" |
| 35 | #include "wl1271_cmd.h" |
| 36 | |
| 37 | /* |
| 38 | * send command to firmware |
| 39 | * |
| 40 | * @wl: wl struct |
| 41 | * @id: command id |
| 42 | * @buf: buffer containing the command, must work with dma |
| 43 | * @len: length of the buffer |
| 44 | */ |
| 45 | int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len) |
| 46 | { |
| 47 | struct wl1271_cmd_header *cmd; |
| 48 | unsigned long timeout; |
| 49 | u32 intr; |
| 50 | int ret = 0; |
| 51 | |
| 52 | cmd = buf; |
| 53 | cmd->id = id; |
| 54 | cmd->status = 0; |
| 55 | |
| 56 | WARN_ON(len % 4 != 0); |
| 57 | |
| 58 | wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len); |
| 59 | |
| 60 | wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); |
| 61 | |
| 62 | timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); |
| 63 | |
| 64 | intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| 65 | while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { |
| 66 | if (time_after(jiffies, timeout)) { |
| 67 | wl1271_error("command complete timeout"); |
| 68 | ret = -ETIMEDOUT; |
| 69 | goto out; |
| 70 | } |
| 71 | |
| 72 | msleep(1); |
| 73 | |
| 74 | intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| 75 | } |
| 76 | |
| 77 | wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK, |
| 78 | WL1271_ACX_INTR_CMD_COMPLETE); |
| 79 | |
| 80 | out: |
| 81 | return ret; |
| 82 | } |
| 83 | |
| 84 | int wl1271_cmd_cal_channel_tune(struct wl1271 *wl) |
| 85 | { |
| 86 | struct wl1271_cmd_cal_channel_tune *cmd; |
| 87 | int ret = 0; |
| 88 | |
| 89 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 90 | if (!cmd) |
| 91 | return -ENOMEM; |
| 92 | |
| 93 | cmd->test.id = TEST_CMD_CHANNEL_TUNE; |
| 94 | |
| 95 | cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4; |
| 96 | /* set up any channel, 7 is in the middle of the range */ |
| 97 | cmd->channel = 7; |
| 98 | |
| 99 | ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); |
| 100 | if (ret < 0) |
| 101 | wl1271_warning("TEST_CMD_CHANNEL_TUNE failed"); |
| 102 | |
| 103 | kfree(cmd); |
| 104 | return ret; |
| 105 | } |
| 106 | |
| 107 | int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl) |
| 108 | { |
| 109 | struct wl1271_cmd_cal_update_ref_point *cmd; |
| 110 | int ret = 0; |
| 111 | |
| 112 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 113 | if (!cmd) |
| 114 | return -ENOMEM; |
| 115 | |
| 116 | cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT; |
| 117 | |
| 118 | /* FIXME: still waiting for the correct values */ |
| 119 | cmd->ref_power = 0; |
| 120 | cmd->ref_detector = 0; |
| 121 | |
| 122 | cmd->sub_band = WL1271_PD_REFERENCE_POINT_BAND_B_G; |
| 123 | |
| 124 | ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); |
| 125 | if (ret < 0) |
| 126 | wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed"); |
| 127 | |
| 128 | kfree(cmd); |
| 129 | return ret; |
| 130 | } |
| 131 | |
| 132 | int wl1271_cmd_cal_p2g(struct wl1271 *wl) |
| 133 | { |
| 134 | struct wl1271_cmd_cal_p2g *cmd; |
| 135 | int ret = 0; |
| 136 | |
| 137 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 138 | if (!cmd) |
| 139 | return -ENOMEM; |
| 140 | |
| 141 | cmd->test.id = TEST_CMD_P2G_CAL; |
| 142 | |
| 143 | cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G; |
| 144 | |
| 145 | ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); |
| 146 | if (ret < 0) |
| 147 | wl1271_warning("TEST_CMD_P2G_CAL failed"); |
| 148 | |
| 149 | kfree(cmd); |
| 150 | return ret; |
| 151 | } |
| 152 | |
| 153 | int wl1271_cmd_cal(struct wl1271 *wl) |
| 154 | { |
| 155 | /* |
| 156 | * FIXME: we must make sure that we're not sleeping when calibration |
| 157 | * is done |
| 158 | */ |
| 159 | int ret; |
| 160 | |
| 161 | wl1271_notice("performing tx calibration"); |
| 162 | |
| 163 | ret = wl1271_cmd_cal_channel_tune(wl); |
| 164 | if (ret < 0) |
| 165 | return ret; |
| 166 | |
| 167 | ret = wl1271_cmd_cal_update_ref_point(wl); |
| 168 | if (ret < 0) |
| 169 | return ret; |
| 170 | |
| 171 | ret = wl1271_cmd_cal_p2g(wl); |
| 172 | if (ret < 0) |
| 173 | return ret; |
| 174 | |
| 175 | return ret; |
| 176 | } |
| 177 | |
| 178 | int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval, |
| 179 | u16 beacon_interval, u8 wait) |
| 180 | { |
| 181 | static bool do_cal = true; |
| 182 | unsigned long timeout; |
| 183 | struct wl1271_cmd_join *join; |
| 184 | int ret, i; |
| 185 | u8 *bssid; |
| 186 | |
| 187 | /* FIXME: remove when we get calibration from the factory */ |
| 188 | if (do_cal) { |
| 189 | ret = wl1271_cmd_cal(wl); |
| 190 | if (ret < 0) |
| 191 | wl1271_warning("couldn't calibrate"); |
| 192 | else |
| 193 | do_cal = false; |
| 194 | } |
| 195 | |
| 196 | |
| 197 | join = kzalloc(sizeof(*join), GFP_KERNEL); |
| 198 | if (!join) { |
| 199 | ret = -ENOMEM; |
| 200 | goto out; |
| 201 | } |
| 202 | |
| 203 | wl1271_debug(DEBUG_CMD, "cmd join"); |
| 204 | |
| 205 | /* Reverse order BSSID */ |
| 206 | bssid = (u8 *) &join->bssid_lsb; |
| 207 | for (i = 0; i < ETH_ALEN; i++) |
| 208 | bssid[i] = wl->bssid[ETH_ALEN - i - 1]; |
| 209 | |
| 210 | join->rx_config_options = wl->rx_config; |
| 211 | join->rx_filter_options = wl->rx_filter; |
| 212 | |
| 213 | join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | |
| 214 | RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; |
| 215 | |
| 216 | join->beacon_interval = beacon_interval; |
| 217 | join->dtim_interval = dtim_interval; |
| 218 | join->bss_type = bss_type; |
| 219 | join->channel = wl->channel; |
| 220 | join->ssid_len = wl->ssid_len; |
| 221 | memcpy(join->ssid, wl->ssid, wl->ssid_len); |
| 222 | join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH; |
| 223 | |
| 224 | /* increment the session counter */ |
| 225 | wl->session_counter++; |
| 226 | if (wl->session_counter >= SESSION_COUNTER_MAX) |
| 227 | wl->session_counter = 0; |
| 228 | |
| 229 | join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET; |
| 230 | |
Juuso Oikarinen | ac4e4ce | 2009-10-08 21:56:19 +0300 | [diff] [blame] | 231 | /* reset TX security counters */ |
| 232 | wl->tx_security_last_seq = 0; |
| 233 | wl->tx_security_seq_16 = 0; |
| 234 | wl->tx_security_seq_32 = 0; |
Luciano Coelho | f5fc0f8 | 2009-08-06 16:25:28 +0300 | [diff] [blame] | 235 | |
| 236 | ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); |
| 237 | if (ret < 0) { |
| 238 | wl1271_error("failed to initiate cmd join"); |
| 239 | goto out_free; |
| 240 | } |
| 241 | |
| 242 | timeout = msecs_to_jiffies(JOIN_TIMEOUT); |
| 243 | |
| 244 | /* |
| 245 | * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to |
| 246 | * simplify locking we just sleep instead, for now |
| 247 | */ |
| 248 | if (wait) |
| 249 | msleep(10); |
| 250 | |
| 251 | out_free: |
| 252 | kfree(join); |
| 253 | |
| 254 | out: |
| 255 | return ret; |
| 256 | } |
| 257 | |
| 258 | /** |
| 259 | * send test command to firmware |
| 260 | * |
| 261 | * @wl: wl struct |
| 262 | * @buf: buffer containing the command, with all headers, must work with dma |
| 263 | * @len: length of the buffer |
| 264 | * @answer: is answer needed |
| 265 | */ |
| 266 | int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) |
| 267 | { |
| 268 | int ret; |
| 269 | |
| 270 | wl1271_debug(DEBUG_CMD, "cmd test"); |
| 271 | |
| 272 | ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len); |
| 273 | |
| 274 | if (ret < 0) { |
| 275 | wl1271_warning("TEST command failed"); |
| 276 | return ret; |
| 277 | } |
| 278 | |
| 279 | if (answer) { |
| 280 | struct wl1271_command *cmd_answer; |
| 281 | |
| 282 | /* |
| 283 | * The test command got in, we can read the answer. |
| 284 | * The answer would be a wl1271_command, where the |
| 285 | * parameter array contains the actual answer. |
| 286 | */ |
| 287 | wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len); |
| 288 | |
| 289 | cmd_answer = buf; |
| 290 | |
| 291 | if (cmd_answer->header.status != CMD_STATUS_SUCCESS) |
| 292 | wl1271_error("TEST command answer error: %d", |
| 293 | cmd_answer->header.status); |
| 294 | } |
| 295 | |
| 296 | return 0; |
| 297 | } |
| 298 | |
| 299 | /** |
| 300 | * read acx from firmware |
| 301 | * |
| 302 | * @wl: wl struct |
| 303 | * @id: acx id |
| 304 | * @buf: buffer for the response, including all headers, must work with dma |
| 305 | * @len: lenght of buf |
| 306 | */ |
| 307 | int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) |
| 308 | { |
| 309 | struct acx_header *acx = buf; |
| 310 | int ret; |
| 311 | |
| 312 | wl1271_debug(DEBUG_CMD, "cmd interrogate"); |
| 313 | |
| 314 | acx->id = id; |
| 315 | |
| 316 | /* payload length, does not include any headers */ |
| 317 | acx->len = len - sizeof(*acx); |
| 318 | |
| 319 | ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); |
| 320 | if (ret < 0) { |
| 321 | wl1271_error("INTERROGATE command failed"); |
| 322 | goto out; |
| 323 | } |
| 324 | |
| 325 | /* the interrogate command got in, we can read the answer */ |
| 326 | wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len); |
| 327 | |
| 328 | acx = buf; |
| 329 | if (acx->cmd.status != CMD_STATUS_SUCCESS) |
| 330 | wl1271_error("INTERROGATE command error: %d", |
| 331 | acx->cmd.status); |
| 332 | |
| 333 | out: |
| 334 | return ret; |
| 335 | } |
| 336 | |
| 337 | /** |
| 338 | * write acx value to firmware |
| 339 | * |
| 340 | * @wl: wl struct |
| 341 | * @id: acx id |
| 342 | * @buf: buffer containing acx, including all headers, must work with dma |
| 343 | * @len: length of buf |
| 344 | */ |
| 345 | int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) |
| 346 | { |
| 347 | struct acx_header *acx = buf; |
| 348 | int ret; |
| 349 | |
| 350 | wl1271_debug(DEBUG_CMD, "cmd configure"); |
| 351 | |
| 352 | acx->id = id; |
| 353 | |
| 354 | /* payload length, does not include any headers */ |
| 355 | acx->len = len - sizeof(*acx); |
| 356 | |
| 357 | ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len); |
| 358 | if (ret < 0) { |
| 359 | wl1271_warning("CONFIGURE command NOK"); |
| 360 | return ret; |
| 361 | } |
| 362 | |
| 363 | return 0; |
| 364 | } |
| 365 | |
| 366 | int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable) |
| 367 | { |
| 368 | struct cmd_enabledisable_path *cmd; |
| 369 | int ret; |
| 370 | u16 cmd_rx, cmd_tx; |
| 371 | |
| 372 | wl1271_debug(DEBUG_CMD, "cmd data path"); |
| 373 | |
| 374 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 375 | if (!cmd) { |
| 376 | ret = -ENOMEM; |
| 377 | goto out; |
| 378 | } |
| 379 | |
| 380 | cmd->channel = channel; |
| 381 | |
| 382 | if (enable) { |
| 383 | cmd_rx = CMD_ENABLE_RX; |
| 384 | cmd_tx = CMD_ENABLE_TX; |
| 385 | } else { |
| 386 | cmd_rx = CMD_DISABLE_RX; |
| 387 | cmd_tx = CMD_DISABLE_TX; |
| 388 | } |
| 389 | |
| 390 | ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); |
| 391 | if (ret < 0) { |
| 392 | wl1271_error("rx %s cmd for channel %d failed", |
| 393 | enable ? "start" : "stop", channel); |
| 394 | goto out; |
| 395 | } |
| 396 | |
| 397 | wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", |
| 398 | enable ? "start" : "stop", channel); |
| 399 | |
| 400 | ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); |
| 401 | if (ret < 0) { |
| 402 | wl1271_error("tx %s cmd for channel %d failed", |
| 403 | enable ? "start" : "stop", channel); |
| 404 | return ret; |
| 405 | } |
| 406 | |
| 407 | wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d", |
| 408 | enable ? "start" : "stop", channel); |
| 409 | |
| 410 | out: |
| 411 | kfree(cmd); |
| 412 | return ret; |
| 413 | } |
| 414 | |
| 415 | int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode) |
| 416 | { |
| 417 | struct wl1271_cmd_ps_params *ps_params = NULL; |
| 418 | int ret = 0; |
| 419 | |
| 420 | /* FIXME: this should be in ps.c */ |
| 421 | ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP, |
| 422 | wl->listen_int); |
| 423 | if (ret < 0) { |
| 424 | wl1271_error("couldn't set wake up conditions"); |
| 425 | goto out; |
| 426 | } |
| 427 | |
| 428 | wl1271_debug(DEBUG_CMD, "cmd set ps mode"); |
| 429 | |
| 430 | ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); |
| 431 | if (!ps_params) { |
| 432 | ret = -ENOMEM; |
| 433 | goto out; |
| 434 | } |
| 435 | |
| 436 | ps_params->ps_mode = ps_mode; |
| 437 | ps_params->send_null_data = 1; |
| 438 | ps_params->retries = 5; |
| 439 | ps_params->hang_over_period = 128; |
| 440 | ps_params->null_data_rate = 1; /* 1 Mbps */ |
| 441 | |
| 442 | ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, |
| 443 | sizeof(*ps_params)); |
| 444 | if (ret < 0) { |
| 445 | wl1271_error("cmd set_ps_mode failed"); |
| 446 | goto out; |
| 447 | } |
| 448 | |
| 449 | out: |
| 450 | kfree(ps_params); |
| 451 | return ret; |
| 452 | } |
| 453 | |
| 454 | int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, |
| 455 | size_t len) |
| 456 | { |
| 457 | struct cmd_read_write_memory *cmd; |
| 458 | int ret = 0; |
| 459 | |
| 460 | wl1271_debug(DEBUG_CMD, "cmd read memory"); |
| 461 | |
| 462 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 463 | if (!cmd) { |
| 464 | ret = -ENOMEM; |
| 465 | goto out; |
| 466 | } |
| 467 | |
| 468 | WARN_ON(len > MAX_READ_SIZE); |
| 469 | len = min_t(size_t, len, MAX_READ_SIZE); |
| 470 | |
| 471 | cmd->addr = addr; |
| 472 | cmd->size = len; |
| 473 | |
| 474 | ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); |
| 475 | if (ret < 0) { |
| 476 | wl1271_error("read memory command failed: %d", ret); |
| 477 | goto out; |
| 478 | } |
| 479 | |
| 480 | /* the read command got in, we can now read the answer */ |
| 481 | wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); |
| 482 | |
| 483 | if (cmd->header.status != CMD_STATUS_SUCCESS) |
| 484 | wl1271_error("error in read command result: %d", |
| 485 | cmd->header.status); |
| 486 | |
| 487 | memcpy(answer, cmd->value, len); |
| 488 | |
| 489 | out: |
| 490 | kfree(cmd); |
| 491 | return ret; |
| 492 | } |
| 493 | |
| 494 | int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len, |
| 495 | u8 active_scan, u8 high_prio, u8 num_channels, |
| 496 | u8 probe_requests) |
| 497 | { |
| 498 | |
| 499 | struct wl1271_cmd_trigger_scan_to *trigger = NULL; |
| 500 | struct wl1271_cmd_scan *params = NULL; |
| 501 | int i, ret; |
| 502 | u16 scan_options = 0; |
| 503 | |
| 504 | if (wl->scanning) |
| 505 | return -EINVAL; |
| 506 | |
| 507 | params = kzalloc(sizeof(*params), GFP_KERNEL); |
| 508 | if (!params) |
| 509 | return -ENOMEM; |
| 510 | |
| 511 | params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); |
| 512 | params->params.rx_filter_options = |
| 513 | cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); |
| 514 | |
| 515 | if (!active_scan) |
| 516 | scan_options |= WL1271_SCAN_OPT_PASSIVE; |
| 517 | if (high_prio) |
| 518 | scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH; |
| 519 | params->params.scan_options = scan_options; |
| 520 | |
| 521 | params->params.num_channels = num_channels; |
| 522 | params->params.num_probe_requests = probe_requests; |
| 523 | params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS); |
| 524 | params->params.tid_trigger = 0; |
| 525 | params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; |
| 526 | |
| 527 | for (i = 0; i < num_channels; i++) { |
| 528 | params->channels[i].min_duration = |
| 529 | cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION); |
| 530 | params->channels[i].max_duration = |
| 531 | cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION); |
| 532 | memset(¶ms->channels[i].bssid_lsb, 0xff, 4); |
| 533 | memset(¶ms->channels[i].bssid_msb, 0xff, 2); |
| 534 | params->channels[i].early_termination = 0; |
| 535 | params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR; |
| 536 | params->channels[i].channel = i + 1; |
| 537 | } |
| 538 | |
| 539 | if (len && ssid) { |
| 540 | params->params.ssid_len = len; |
| 541 | memcpy(params->params.ssid, ssid, len); |
| 542 | } |
| 543 | |
| 544 | ret = wl1271_cmd_build_probe_req(wl, ssid, len); |
| 545 | if (ret < 0) { |
| 546 | wl1271_error("PROBE request template failed"); |
| 547 | goto out; |
| 548 | } |
| 549 | |
| 550 | trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); |
| 551 | if (!trigger) { |
| 552 | ret = -ENOMEM; |
| 553 | goto out; |
| 554 | } |
| 555 | |
| 556 | /* disable the timeout */ |
| 557 | trigger->timeout = 0; |
| 558 | |
| 559 | ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, |
| 560 | sizeof(*trigger)); |
| 561 | if (ret < 0) { |
| 562 | wl1271_error("trigger scan to failed for hw scan"); |
| 563 | goto out; |
| 564 | } |
| 565 | |
| 566 | wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params)); |
| 567 | |
| 568 | wl->scanning = true; |
| 569 | |
| 570 | ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params)); |
| 571 | if (ret < 0) { |
| 572 | wl1271_error("SCAN failed"); |
| 573 | goto out; |
| 574 | } |
| 575 | |
| 576 | wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params)); |
| 577 | |
| 578 | if (params->header.status != CMD_STATUS_SUCCESS) { |
| 579 | wl1271_error("Scan command error: %d", |
| 580 | params->header.status); |
| 581 | wl->scanning = false; |
| 582 | ret = -EIO; |
| 583 | goto out; |
| 584 | } |
| 585 | |
| 586 | out: |
| 587 | kfree(params); |
| 588 | return ret; |
| 589 | } |
| 590 | |
| 591 | int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, |
| 592 | void *buf, size_t buf_len) |
| 593 | { |
| 594 | struct wl1271_cmd_template_set *cmd; |
| 595 | int ret = 0; |
| 596 | |
| 597 | wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id); |
| 598 | |
| 599 | WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE); |
| 600 | buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE); |
| 601 | |
| 602 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 603 | if (!cmd) { |
| 604 | ret = -ENOMEM; |
| 605 | goto out; |
| 606 | } |
| 607 | |
| 608 | cmd->len = cpu_to_le16(buf_len); |
| 609 | cmd->template_type = template_id; |
| 610 | cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED; |
| 611 | cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT; |
| 612 | cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT; |
| 613 | |
| 614 | if (buf) |
| 615 | memcpy(cmd->template_data, buf, buf_len); |
| 616 | |
| 617 | ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd)); |
| 618 | if (ret < 0) { |
| 619 | wl1271_warning("cmd set_template failed: %d", ret); |
| 620 | goto out_free; |
| 621 | } |
| 622 | |
| 623 | out_free: |
| 624 | kfree(cmd); |
| 625 | |
| 626 | out: |
| 627 | return ret; |
| 628 | } |
| 629 | |
| 630 | static int wl1271_build_basic_rates(char *rates) |
| 631 | { |
| 632 | u8 index = 0; |
| 633 | |
| 634 | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB; |
| 635 | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB; |
| 636 | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB; |
| 637 | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB; |
| 638 | |
| 639 | return index; |
| 640 | } |
| 641 | |
| 642 | static int wl1271_build_extended_rates(char *rates) |
| 643 | { |
| 644 | u8 index = 0; |
| 645 | |
| 646 | rates[index++] = IEEE80211_OFDM_RATE_6MB; |
| 647 | rates[index++] = IEEE80211_OFDM_RATE_9MB; |
| 648 | rates[index++] = IEEE80211_OFDM_RATE_12MB; |
| 649 | rates[index++] = IEEE80211_OFDM_RATE_18MB; |
| 650 | rates[index++] = IEEE80211_OFDM_RATE_24MB; |
| 651 | rates[index++] = IEEE80211_OFDM_RATE_36MB; |
| 652 | rates[index++] = IEEE80211_OFDM_RATE_48MB; |
| 653 | rates[index++] = IEEE80211_OFDM_RATE_54MB; |
| 654 | |
| 655 | return index; |
| 656 | } |
| 657 | |
| 658 | int wl1271_cmd_build_null_data(struct wl1271 *wl) |
| 659 | { |
| 660 | struct wl12xx_null_data_template template; |
| 661 | |
| 662 | if (!is_zero_ether_addr(wl->bssid)) { |
| 663 | memcpy(template.header.da, wl->bssid, ETH_ALEN); |
| 664 | memcpy(template.header.bssid, wl->bssid, ETH_ALEN); |
| 665 | } else { |
| 666 | memset(template.header.da, 0xff, ETH_ALEN); |
| 667 | memset(template.header.bssid, 0xff, ETH_ALEN); |
| 668 | } |
| 669 | |
| 670 | memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); |
| 671 | template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA | |
| 672 | IEEE80211_STYPE_NULLFUNC); |
| 673 | |
| 674 | return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template, |
| 675 | sizeof(template)); |
| 676 | |
| 677 | } |
| 678 | |
| 679 | int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid) |
| 680 | { |
| 681 | struct wl12xx_ps_poll_template template; |
| 682 | |
| 683 | memcpy(template.bssid, wl->bssid, ETH_ALEN); |
| 684 | memcpy(template.ta, wl->mac_addr, ETH_ALEN); |
Juuso Oikarinen | c3fea19 | 2009-10-08 21:56:22 +0300 | [diff] [blame] | 685 | |
| 686 | /* aid in PS-Poll has its two MSBs each set to 1 */ |
| 687 | template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid); |
| 688 | |
Luciano Coelho | f5fc0f8 | 2009-08-06 16:25:28 +0300 | [diff] [blame] | 689 | template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); |
| 690 | |
| 691 | return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template, |
| 692 | sizeof(template)); |
| 693 | |
| 694 | } |
| 695 | |
| 696 | int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len) |
| 697 | { |
| 698 | struct wl12xx_probe_req_template template; |
| 699 | struct wl12xx_ie_rates *rates; |
| 700 | char *ptr; |
| 701 | u16 size; |
| 702 | |
| 703 | ptr = (char *)&template; |
| 704 | size = sizeof(struct ieee80211_header); |
| 705 | |
| 706 | memset(template.header.da, 0xff, ETH_ALEN); |
| 707 | memset(template.header.bssid, 0xff, ETH_ALEN); |
| 708 | memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); |
| 709 | template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); |
| 710 | |
| 711 | /* IEs */ |
| 712 | /* SSID */ |
| 713 | template.ssid.header.id = WLAN_EID_SSID; |
| 714 | template.ssid.header.len = ssid_len; |
| 715 | if (ssid_len && ssid) |
| 716 | memcpy(template.ssid.ssid, ssid, ssid_len); |
| 717 | size += sizeof(struct wl12xx_ie_header) + ssid_len; |
| 718 | ptr += size; |
| 719 | |
| 720 | /* Basic Rates */ |
| 721 | rates = (struct wl12xx_ie_rates *)ptr; |
| 722 | rates->header.id = WLAN_EID_SUPP_RATES; |
| 723 | rates->header.len = wl1271_build_basic_rates(rates->rates); |
| 724 | size += sizeof(struct wl12xx_ie_header) + rates->header.len; |
| 725 | ptr += sizeof(struct wl12xx_ie_header) + rates->header.len; |
| 726 | |
| 727 | /* Extended rates */ |
| 728 | rates = (struct wl12xx_ie_rates *)ptr; |
| 729 | rates->header.id = WLAN_EID_EXT_SUPP_RATES; |
| 730 | rates->header.len = wl1271_build_extended_rates(rates->rates); |
| 731 | size += sizeof(struct wl12xx_ie_header) + rates->header.len; |
| 732 | |
| 733 | wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size); |
| 734 | |
| 735 | return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, |
| 736 | &template, size); |
| 737 | } |
| 738 | |
| 739 | int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id) |
| 740 | { |
| 741 | struct wl1271_cmd_set_keys *cmd; |
| 742 | int ret = 0; |
| 743 | |
| 744 | wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id); |
| 745 | |
| 746 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 747 | if (!cmd) { |
| 748 | ret = -ENOMEM; |
| 749 | goto out; |
| 750 | } |
| 751 | |
| 752 | cmd->id = id; |
| 753 | cmd->key_action = KEY_SET_ID; |
| 754 | cmd->key_type = KEY_WEP; |
| 755 | |
| 756 | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); |
| 757 | if (ret < 0) { |
| 758 | wl1271_warning("cmd set_default_wep_key failed: %d", ret); |
| 759 | goto out; |
| 760 | } |
| 761 | |
| 762 | out: |
| 763 | kfree(cmd); |
| 764 | |
| 765 | return ret; |
| 766 | } |
| 767 | |
| 768 | int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, |
Juuso Oikarinen | ac4e4ce | 2009-10-08 21:56:19 +0300 | [diff] [blame] | 769 | u8 key_size, const u8 *key, const u8 *addr, |
| 770 | u32 tx_seq_32, u16 tx_seq_16) |
Luciano Coelho | f5fc0f8 | 2009-08-06 16:25:28 +0300 | [diff] [blame] | 771 | { |
| 772 | struct wl1271_cmd_set_keys *cmd; |
| 773 | int ret = 0; |
| 774 | |
| 775 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 776 | if (!cmd) { |
| 777 | ret = -ENOMEM; |
| 778 | goto out; |
| 779 | } |
| 780 | |
| 781 | if (key_type != KEY_WEP) |
| 782 | memcpy(cmd->addr, addr, ETH_ALEN); |
| 783 | |
| 784 | cmd->key_action = action; |
| 785 | cmd->key_size = key_size; |
| 786 | cmd->key_type = key_type; |
| 787 | |
Juuso Oikarinen | ac4e4ce | 2009-10-08 21:56:19 +0300 | [diff] [blame] | 788 | cmd->ac_seq_num16[0] = tx_seq_16; |
| 789 | cmd->ac_seq_num32[0] = tx_seq_32; |
| 790 | |
Luciano Coelho | f5fc0f8 | 2009-08-06 16:25:28 +0300 | [diff] [blame] | 791 | /* we have only one SSID profile */ |
| 792 | cmd->ssid_profile = 0; |
| 793 | |
| 794 | cmd->id = id; |
| 795 | |
Luciano Coelho | f5fc0f8 | 2009-08-06 16:25:28 +0300 | [diff] [blame] | 796 | if (key_type == KEY_TKIP) { |
| 797 | /* |
| 798 | * We get the key in the following form: |
| 799 | * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) |
| 800 | * but the target is expecting: |
| 801 | * TKIP - RX MIC - TX MIC |
| 802 | */ |
| 803 | memcpy(cmd->key, key, 16); |
| 804 | memcpy(cmd->key + 16, key + 24, 8); |
| 805 | memcpy(cmd->key + 24, key + 16, 8); |
| 806 | |
| 807 | } else { |
| 808 | memcpy(cmd->key, key, key_size); |
| 809 | } |
| 810 | |
| 811 | wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); |
| 812 | |
| 813 | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); |
| 814 | if (ret < 0) { |
| 815 | wl1271_warning("could not set keys"); |
| 816 | goto out; |
| 817 | } |
| 818 | |
| 819 | out: |
| 820 | kfree(cmd); |
| 821 | |
| 822 | return ret; |
| 823 | } |