Chanwoo Choi | db1b903 | 2012-07-17 13:28:28 +0900 | [diff] [blame] | 1 | /* |
| 2 | * extcon-max77693.c - MAX77693 extcon driver to support MAX77693 MUIC |
| 3 | * |
| 4 | * Copyright (C) 2012 Samsung Electrnoics |
| 5 | * Chanwoo Choi <cw00.choi@samsung.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License, or |
| 10 | * (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/i2c.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/interrupt.h> |
| 23 | #include <linux/err.h> |
| 24 | #include <linux/platform_device.h> |
| 25 | #include <linux/mfd/max77693.h> |
| 26 | #include <linux/mfd/max77693-private.h> |
| 27 | #include <linux/extcon.h> |
| 28 | #include <linux/regmap.h> |
| 29 | #include <linux/irqdomain.h> |
| 30 | |
| 31 | #define DEV_NAME "max77693-muic" |
| 32 | |
| 33 | /* MAX77693 MUIC - STATUS1~3 Register */ |
| 34 | #define STATUS1_ADC_SHIFT (0) |
| 35 | #define STATUS1_ADCLOW_SHIFT (5) |
| 36 | #define STATUS1_ADCERR_SHIFT (6) |
| 37 | #define STATUS1_ADC1K_SHIFT (7) |
| 38 | #define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) |
| 39 | #define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) |
| 40 | #define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) |
| 41 | #define STATUS1_ADC1K_MASK (0x1 << STATUS1_ADC1K_SHIFT) |
| 42 | |
| 43 | #define STATUS2_CHGTYP_SHIFT (0) |
| 44 | #define STATUS2_CHGDETRUN_SHIFT (3) |
| 45 | #define STATUS2_DCDTMR_SHIFT (4) |
| 46 | #define STATUS2_DXOVP_SHIFT (5) |
| 47 | #define STATUS2_VBVOLT_SHIFT (6) |
| 48 | #define STATUS2_VIDRM_SHIFT (7) |
| 49 | #define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) |
| 50 | #define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) |
| 51 | #define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) |
| 52 | #define STATUS2_DXOVP_MASK (0x1 << STATUS2_DXOVP_SHIFT) |
| 53 | #define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) |
| 54 | #define STATUS2_VIDRM_MASK (0x1 << STATUS2_VIDRM_SHIFT) |
| 55 | |
| 56 | #define STATUS3_OVP_SHIFT (2) |
| 57 | #define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) |
| 58 | |
| 59 | /* MAX77693 CDETCTRL1~2 register */ |
| 60 | #define CDETCTRL1_CHGDETEN_SHIFT (0) |
| 61 | #define CDETCTRL1_CHGTYPMAN_SHIFT (1) |
| 62 | #define CDETCTRL1_DCDEN_SHIFT (2) |
| 63 | #define CDETCTRL1_DCD2SCT_SHIFT (3) |
| 64 | #define CDETCTRL1_CDDELAY_SHIFT (4) |
| 65 | #define CDETCTRL1_DCDCPL_SHIFT (5) |
| 66 | #define CDETCTRL1_CDPDET_SHIFT (7) |
| 67 | #define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT) |
| 68 | #define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT) |
| 69 | #define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT) |
| 70 | #define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT) |
| 71 | #define CDETCTRL1_CDDELAY_MASK (0x1 << CDETCTRL1_CDDELAY_SHIFT) |
| 72 | #define CDETCTRL1_DCDCPL_MASK (0x1 << CDETCTRL1_DCDCPL_SHIFT) |
| 73 | #define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT) |
| 74 | |
| 75 | #define CDETCTRL2_VIDRMEN_SHIFT (1) |
| 76 | #define CDETCTRL2_DXOVPEN_SHIFT (3) |
| 77 | #define CDETCTRL2_VIDRMEN_MASK (0x1 << CDETCTRL2_VIDRMEN_SHIFT) |
| 78 | #define CDETCTRL2_DXOVPEN_MASK (0x1 << CDETCTRL2_DXOVPEN_SHIFT) |
| 79 | |
| 80 | /* MAX77693 MUIC - CONTROL1~3 register */ |
| 81 | #define COMN1SW_SHIFT (0) |
| 82 | #define COMP2SW_SHIFT (3) |
| 83 | #define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) |
| 84 | #define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) |
| 85 | #define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK) |
| 86 | #define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \ |
| 87 | | (1 << COMN1SW_SHIFT)) |
| 88 | #define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \ |
| 89 | | (2 << COMN1SW_SHIFT)) |
| 90 | #define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \ |
| 91 | | (3 << COMN1SW_SHIFT)) |
| 92 | #define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \ |
| 93 | | (0 << COMN1SW_SHIFT)) |
| 94 | |
| 95 | #define CONTROL2_LOWPWR_SHIFT (0) |
| 96 | #define CONTROL2_ADCEN_SHIFT (1) |
| 97 | #define CONTROL2_CPEN_SHIFT (2) |
| 98 | #define CONTROL2_SFOUTASRT_SHIFT (3) |
| 99 | #define CONTROL2_SFOUTORD_SHIFT (4) |
| 100 | #define CONTROL2_ACCDET_SHIFT (5) |
| 101 | #define CONTROL2_USBCPINT_SHIFT (6) |
| 102 | #define CONTROL2_RCPS_SHIFT (7) |
| 103 | #define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT) |
| 104 | #define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT) |
| 105 | #define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT) |
| 106 | #define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT) |
| 107 | #define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT) |
| 108 | #define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT) |
| 109 | #define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT) |
| 110 | #define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT) |
| 111 | |
| 112 | #define CONTROL3_JIGSET_SHIFT (0) |
| 113 | #define CONTROL3_BTLDSET_SHIFT (2) |
| 114 | #define CONTROL3_ADCDBSET_SHIFT (4) |
| 115 | #define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT) |
| 116 | #define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT) |
| 117 | #define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT) |
| 118 | |
| 119 | enum max77693_muic_adc_debounce_time { |
| 120 | ADC_DEBOUNCE_TIME_5MS = 0, |
| 121 | ADC_DEBOUNCE_TIME_10MS, |
| 122 | ADC_DEBOUNCE_TIME_25MS, |
| 123 | ADC_DEBOUNCE_TIME_38_62MS, |
| 124 | }; |
| 125 | |
| 126 | struct max77693_muic_info { |
| 127 | struct device *dev; |
| 128 | struct max77693_dev *max77693; |
| 129 | struct extcon_dev *edev; |
| 130 | int prev_adc; |
| 131 | int prev_adc_gnd; |
| 132 | int prev_chg_type; |
| 133 | u8 status[2]; |
| 134 | |
| 135 | int irq; |
| 136 | struct work_struct irq_work; |
| 137 | struct mutex mutex; |
| 138 | }; |
| 139 | |
| 140 | enum max77693_muic_charger_type { |
| 141 | MAX77693_CHARGER_TYPE_NONE = 0, |
| 142 | MAX77693_CHARGER_TYPE_USB, |
| 143 | MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT, |
| 144 | MAX77693_CHARGER_TYPE_DEDICATED_CHG, |
| 145 | MAX77693_CHARGER_TYPE_APPLE_500MA, |
| 146 | MAX77693_CHARGER_TYPE_APPLE_1A_2A, |
| 147 | MAX77693_CHARGER_TYPE_DEAD_BATTERY = 7, |
| 148 | }; |
| 149 | |
| 150 | /** |
| 151 | * struct max77693_muic_irq |
| 152 | * @irq: the index of irq list of MUIC device. |
| 153 | * @name: the name of irq. |
| 154 | * @virq: the virtual irq to use irq domain |
| 155 | */ |
| 156 | struct max77693_muic_irq { |
| 157 | unsigned int irq; |
| 158 | const char *name; |
| 159 | unsigned int virq; |
| 160 | }; |
| 161 | |
| 162 | static struct max77693_muic_irq muic_irqs[] = { |
| 163 | { MAX77693_MUIC_IRQ_INT1_ADC, "muic-ADC" }, |
| 164 | { MAX77693_MUIC_IRQ_INT1_ADC_LOW, "muic-ADCLOW" }, |
| 165 | { MAX77693_MUIC_IRQ_INT1_ADC_ERR, "muic-ADCError" }, |
| 166 | { MAX77693_MUIC_IRQ_INT1_ADC1K, "muic-ADC1K" }, |
| 167 | { MAX77693_MUIC_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, |
| 168 | { MAX77693_MUIC_IRQ_INT2_CHGDETREUN, "muic-CHGDETREUN" }, |
| 169 | { MAX77693_MUIC_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, |
| 170 | { MAX77693_MUIC_IRQ_INT2_DXOVP, "muic-DXOVP" }, |
| 171 | { MAX77693_MUIC_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, |
| 172 | { MAX77693_MUIC_IRQ_INT2_VIDRM, "muic-VIDRM" }, |
| 173 | { MAX77693_MUIC_IRQ_INT3_EOC, "muic-EOC" }, |
| 174 | { MAX77693_MUIC_IRQ_INT3_CGMBC, "muic-CGMBC" }, |
| 175 | { MAX77693_MUIC_IRQ_INT3_OVP, "muic-OVP" }, |
| 176 | { MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR, "muic-MBCCHG_ERR" }, |
| 177 | { MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, "muic-CHG_ENABLED" }, |
| 178 | { MAX77693_MUIC_IRQ_INT3_BAT_DET, "muic-BAT_DET" }, |
| 179 | }; |
| 180 | |
| 181 | /* Define supported accessory type */ |
| 182 | enum max77693_muic_acc_type { |
| 183 | MAX77693_MUIC_ADC_GROUND = 0x0, |
| 184 | MAX77693_MUIC_ADC_SEND_END_BUTTON, |
| 185 | MAX77693_MUIC_ADC_REMOTE_S1_BUTTON, |
| 186 | MAX77693_MUIC_ADC_REMOTE_S2_BUTTON, |
| 187 | MAX77693_MUIC_ADC_REMOTE_S3_BUTTON, |
| 188 | MAX77693_MUIC_ADC_REMOTE_S4_BUTTON, |
| 189 | MAX77693_MUIC_ADC_REMOTE_S5_BUTTON, |
| 190 | MAX77693_MUIC_ADC_REMOTE_S6_BUTTON, |
| 191 | MAX77693_MUIC_ADC_REMOTE_S7_BUTTON, |
| 192 | MAX77693_MUIC_ADC_REMOTE_S8_BUTTON, |
| 193 | MAX77693_MUIC_ADC_REMOTE_S9_BUTTON, |
| 194 | MAX77693_MUIC_ADC_REMOTE_S10_BUTTON, |
| 195 | MAX77693_MUIC_ADC_REMOTE_S11_BUTTON, |
| 196 | MAX77693_MUIC_ADC_REMOTE_S12_BUTTON, |
| 197 | MAX77693_MUIC_ADC_RESERVED_ACC_1, |
| 198 | MAX77693_MUIC_ADC_RESERVED_ACC_2, |
| 199 | MAX77693_MUIC_ADC_RESERVED_ACC_3, |
| 200 | MAX77693_MUIC_ADC_RESERVED_ACC_4, |
| 201 | MAX77693_MUIC_ADC_RESERVED_ACC_5, |
| 202 | MAX77693_MUIC_ADC_CEA936_AUDIO, |
| 203 | MAX77693_MUIC_ADC_PHONE_POWERED_DEV, |
| 204 | MAX77693_MUIC_ADC_TTY_CONVERTER, |
| 205 | MAX77693_MUIC_ADC_UART_CABLE, |
| 206 | MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG, |
| 207 | MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF, |
| 208 | MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON, |
| 209 | MAX77693_MUIC_ADC_AV_CABLE_NOLOAD, |
| 210 | MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG, |
| 211 | MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF, |
| 212 | MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON, |
| 213 | MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE, |
| 214 | MAX77693_MUIC_ADC_OPEN, |
| 215 | |
| 216 | /* The below accessories have same ADC value so ADCLow and |
| 217 | ADC1K bit is used to separate specific accessory */ |
| 218 | MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, ADCLow:0, ADC1K:0 */ |
| 219 | MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, ADCLow:1, ADC1K:0 */ |
| 220 | MAX77693_MUIC_GND_MHL_CABLE = 0x103, /* ADC:0x0, ADCLow:1, ADC1K:1 */ |
| 221 | }; |
| 222 | |
| 223 | /* MAX77693 MUIC device support below list of accessories(external connector) */ |
| 224 | const char *max77693_extcon_cable[] = { |
| 225 | [0] = "USB", |
| 226 | [1] = "USB-Host", |
| 227 | [2] = "TA", |
| 228 | [3] = "Fast-charger", |
| 229 | [4] = "Slow-charger", |
| 230 | [5] = "Charge-downstream", |
| 231 | [6] = "MHL", |
| 232 | [7] = "Audio-video-load", |
| 233 | [8] = "Audio-video-noload", |
| 234 | [9] = "JIG", |
| 235 | |
| 236 | NULL, |
| 237 | }; |
| 238 | |
| 239 | static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, |
| 240 | enum max77693_muic_adc_debounce_time time) |
| 241 | { |
| 242 | int ret = 0; |
| 243 | u8 ctrl3; |
| 244 | |
| 245 | switch (time) { |
| 246 | case ADC_DEBOUNCE_TIME_5MS: |
| 247 | case ADC_DEBOUNCE_TIME_10MS: |
| 248 | case ADC_DEBOUNCE_TIME_25MS: |
| 249 | case ADC_DEBOUNCE_TIME_38_62MS: |
| 250 | ret = max77693_read_reg(info->max77693->regmap_muic, |
| 251 | MAX77693_MUIC_REG_CTRL3, &ctrl3); |
| 252 | ctrl3 &= ~CONTROL3_ADCDBSET_MASK; |
| 253 | ctrl3 |= (time << CONTROL3_ADCDBSET_SHIFT); |
| 254 | |
| 255 | ret = max77693_write_reg(info->max77693->regmap_muic, |
| 256 | MAX77693_MUIC_REG_CTRL3, ctrl3); |
| 257 | if (ret) { |
| 258 | dev_err(info->dev, "failed to set ADC debounce time\n"); |
| 259 | ret = -EINVAL; |
| 260 | } |
| 261 | break; |
| 262 | default: |
| 263 | dev_err(info->dev, "invalid ADC debounce time\n"); |
| 264 | ret = -EINVAL; |
| 265 | break; |
| 266 | } |
| 267 | |
| 268 | return ret; |
| 269 | }; |
| 270 | |
| 271 | static int max77693_muic_set_path(struct max77693_muic_info *info, |
| 272 | u8 val, bool attached) |
| 273 | { |
| 274 | int ret = 0; |
| 275 | u8 ctrl1, ctrl2 = 0; |
| 276 | |
| 277 | if (attached) |
| 278 | ctrl1 = val; |
| 279 | else |
| 280 | ctrl1 = CONTROL1_SW_OPEN; |
| 281 | |
| 282 | ret = max77693_update_reg(info->max77693->regmap_muic, |
| 283 | MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK); |
| 284 | if (ret < 0) { |
| 285 | dev_err(info->dev, "failed to update MUIC register\n"); |
| 286 | goto out; |
| 287 | } |
| 288 | |
| 289 | if (attached) |
| 290 | ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ |
| 291 | else |
| 292 | ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ |
| 293 | |
| 294 | ret = max77693_update_reg(info->max77693->regmap_muic, |
| 295 | MAX77693_MUIC_REG_CTRL2, ctrl2, |
| 296 | CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); |
| 297 | if (ret < 0) { |
| 298 | dev_err(info->dev, "failed to update MUIC register\n"); |
| 299 | goto out; |
| 300 | } |
| 301 | |
| 302 | dev_info(info->dev, |
| 303 | "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", |
| 304 | ctrl1, ctrl2, attached ? "attached" : "detached"); |
| 305 | out: |
| 306 | return ret; |
| 307 | } |
| 308 | |
| 309 | static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info, |
| 310 | bool attached) |
| 311 | { |
| 312 | int ret = 0; |
| 313 | int type; |
| 314 | int adc, adc1k, adclow; |
| 315 | |
| 316 | if (attached) { |
| 317 | adc = info->status[0] & STATUS1_ADC_MASK; |
| 318 | adclow = info->status[0] & STATUS1_ADCLOW_MASK; |
| 319 | adclow >>= STATUS1_ADCLOW_SHIFT; |
| 320 | adc1k = info->status[0] & STATUS1_ADC1K_MASK; |
| 321 | adc1k >>= STATUS1_ADC1K_SHIFT; |
| 322 | |
| 323 | /** |
| 324 | * [0x1][ADCLow][ADC1K] |
| 325 | * [0x1 0 0 ] : USB_OTG |
| 326 | * [0x1 1 0 ] : Audio Video Cable with load |
| 327 | * [0x1 1 1 ] : MHL |
| 328 | */ |
| 329 | type = ((0x1 << 8) | (adclow << 1) | adc1k); |
| 330 | |
| 331 | /* Store previous ADC value to handle accessory |
| 332 | when accessory will be detached */ |
| 333 | info->prev_adc = adc; |
| 334 | info->prev_adc_gnd = type; |
| 335 | } else |
| 336 | type = info->prev_adc_gnd; |
| 337 | |
| 338 | switch (type) { |
| 339 | case MAX77693_MUIC_GND_USB_OTG: |
| 340 | /* USB_OTG */ |
| 341 | ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); |
| 342 | if (ret < 0) |
| 343 | goto out; |
| 344 | extcon_set_cable_state(info->edev, "USB-Host", attached); |
| 345 | break; |
| 346 | case MAX77693_MUIC_GND_AV_CABLE_LOAD: |
| 347 | /* Audio Video Cable with load */ |
| 348 | ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); |
| 349 | if (ret < 0) |
| 350 | goto out; |
| 351 | extcon_set_cable_state(info->edev, |
| 352 | "Audio-video-load", attached); |
| 353 | break; |
| 354 | case MAX77693_MUIC_GND_MHL_CABLE: |
| 355 | /* MHL */ |
| 356 | extcon_set_cable_state(info->edev, "MHL", attached); |
| 357 | break; |
| 358 | default: |
| 359 | dev_err(info->dev, "faild to detect %s accessory\n", |
| 360 | attached ? "attached" : "detached"); |
| 361 | dev_err(info->dev, "- adc:0x%x, adclow:0x%x, adc1k:0x%x\n", |
| 362 | adc, adclow, adc1k); |
| 363 | ret = -EINVAL; |
| 364 | break; |
| 365 | } |
| 366 | |
| 367 | out: |
| 368 | return ret; |
| 369 | } |
| 370 | |
| 371 | static int max77693_muic_adc_handler(struct max77693_muic_info *info, |
| 372 | int curr_adc, bool attached) |
| 373 | { |
| 374 | int ret = 0; |
| 375 | int adc; |
| 376 | |
| 377 | if (attached) { |
| 378 | /* Store ADC value to handle accessory |
| 379 | when accessory will be detached */ |
| 380 | info->prev_adc = curr_adc; |
| 381 | adc = curr_adc; |
| 382 | } else |
| 383 | adc = info->prev_adc; |
| 384 | |
| 385 | dev_info(info->dev, |
| 386 | "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", |
| 387 | attached ? "attached" : "detached", curr_adc, info->prev_adc); |
| 388 | |
| 389 | switch (adc) { |
| 390 | case MAX77693_MUIC_ADC_GROUND: |
| 391 | /* USB_OTG/MHL/Audio */ |
| 392 | max77693_muic_adc_ground_handler(info, attached); |
| 393 | break; |
| 394 | case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: |
| 395 | case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: |
| 396 | /* USB */ |
| 397 | ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); |
| 398 | if (ret < 0) |
| 399 | goto out; |
| 400 | extcon_set_cable_state(info->edev, "USB", attached); |
| 401 | break; |
| 402 | case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: |
| 403 | case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: |
| 404 | /* JIG */ |
| 405 | ret = max77693_muic_set_path(info, CONTROL1_SW_UART, attached); |
| 406 | if (ret < 0) |
| 407 | goto out; |
| 408 | extcon_set_cable_state(info->edev, "JIG", attached); |
| 409 | break; |
| 410 | case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: |
| 411 | /* Audio Video cable with no-load */ |
| 412 | ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); |
| 413 | if (ret < 0) |
| 414 | goto out; |
| 415 | extcon_set_cable_state(info->edev, |
| 416 | "Audio-video-noload", attached); |
| 417 | break; |
| 418 | case MAX77693_MUIC_ADC_SEND_END_BUTTON: |
| 419 | case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON: |
| 420 | case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON: |
| 421 | case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: |
| 422 | case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON: |
| 423 | case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON: |
| 424 | case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON: |
| 425 | case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: |
| 426 | case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON: |
| 427 | case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: |
| 428 | case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: |
| 429 | case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON: |
| 430 | case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: |
| 431 | case MAX77693_MUIC_ADC_RESERVED_ACC_1: |
| 432 | case MAX77693_MUIC_ADC_RESERVED_ACC_2: |
| 433 | case MAX77693_MUIC_ADC_RESERVED_ACC_3: |
| 434 | case MAX77693_MUIC_ADC_RESERVED_ACC_4: |
| 435 | case MAX77693_MUIC_ADC_RESERVED_ACC_5: |
| 436 | case MAX77693_MUIC_ADC_CEA936_AUDIO: |
| 437 | case MAX77693_MUIC_ADC_PHONE_POWERED_DEV: |
| 438 | case MAX77693_MUIC_ADC_TTY_CONVERTER: |
| 439 | case MAX77693_MUIC_ADC_UART_CABLE: |
| 440 | case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG: |
| 441 | case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: |
| 442 | case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG: |
| 443 | /* This accessory isn't used in general case if it is specially |
| 444 | needed to detect additional accessory, should implement |
| 445 | proper operation when this accessory is attached/detached. */ |
| 446 | dev_info(info->dev, |
| 447 | "accessory is %s but it isn't used (adc:0x%x)\n", |
| 448 | attached ? "attached" : "detached", adc); |
| 449 | goto out; |
| 450 | default: |
| 451 | dev_err(info->dev, |
| 452 | "failed to detect %s accessory (adc:0x%x)\n", |
| 453 | attached ? "attached" : "detached", adc); |
| 454 | ret = -EINVAL; |
| 455 | goto out; |
| 456 | } |
| 457 | |
| 458 | out: |
| 459 | return ret; |
| 460 | } |
| 461 | |
| 462 | static int max77693_muic_chg_handler(struct max77693_muic_info *info, |
| 463 | int curr_chg_type, bool attached) |
| 464 | { |
| 465 | int ret = 0; |
| 466 | int chg_type; |
| 467 | |
| 468 | if (attached) { |
| 469 | /* Store previous charger type to control |
| 470 | when charger accessory will be detached */ |
| 471 | info->prev_chg_type = curr_chg_type; |
| 472 | chg_type = curr_chg_type; |
| 473 | } else |
| 474 | chg_type = info->prev_chg_type; |
| 475 | |
| 476 | dev_info(info->dev, |
| 477 | "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", |
| 478 | attached ? "attached" : "detached", |
| 479 | curr_chg_type, info->prev_chg_type); |
| 480 | |
| 481 | switch (chg_type) { |
| 482 | case MAX77693_CHARGER_TYPE_USB: |
| 483 | ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); |
| 484 | if (ret < 0) |
| 485 | goto out; |
| 486 | extcon_set_cable_state(info->edev, "USB", attached); |
| 487 | break; |
| 488 | case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT: |
| 489 | extcon_set_cable_state(info->edev, |
| 490 | "Charge-downstream", attached); |
| 491 | break; |
| 492 | case MAX77693_CHARGER_TYPE_DEDICATED_CHG: |
| 493 | extcon_set_cable_state(info->edev, "TA", attached); |
| 494 | break; |
| 495 | case MAX77693_CHARGER_TYPE_APPLE_500MA: |
| 496 | extcon_set_cable_state(info->edev, "Slow-charger", attached); |
| 497 | break; |
| 498 | case MAX77693_CHARGER_TYPE_APPLE_1A_2A: |
| 499 | extcon_set_cable_state(info->edev, "Fast-charger", attached); |
| 500 | break; |
| 501 | case MAX77693_CHARGER_TYPE_DEAD_BATTERY: |
| 502 | break; |
| 503 | default: |
| 504 | dev_err(info->dev, |
| 505 | "failed to detect %s accessory (chg_type:0x%x)\n", |
| 506 | attached ? "attached" : "detached", chg_type); |
| 507 | ret = -EINVAL; |
| 508 | goto out; |
| 509 | } |
| 510 | |
| 511 | out: |
| 512 | return ret; |
| 513 | } |
| 514 | |
| 515 | static void max77693_muic_irq_work(struct work_struct *work) |
| 516 | { |
| 517 | struct max77693_muic_info *info = container_of(work, |
| 518 | struct max77693_muic_info, irq_work); |
| 519 | int curr_adc, curr_chg_type; |
| 520 | int irq_type = -1; |
| 521 | int i, ret = 0; |
| 522 | bool attached = true; |
| 523 | |
| 524 | if (!info->edev) |
| 525 | return; |
| 526 | |
| 527 | mutex_lock(&info->mutex); |
| 528 | |
| 529 | for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) |
| 530 | if (info->irq == muic_irqs[i].virq) |
| 531 | irq_type = muic_irqs[i].irq; |
| 532 | |
| 533 | ret = max77693_bulk_read(info->max77693->regmap_muic, |
| 534 | MAX77693_MUIC_REG_STATUS1, 2, info->status); |
| 535 | if (ret) { |
| 536 | dev_err(info->dev, "failed to read MUIC register\n"); |
| 537 | mutex_unlock(&info->mutex); |
| 538 | return; |
| 539 | } |
| 540 | |
| 541 | switch (irq_type) { |
| 542 | case MAX77693_MUIC_IRQ_INT1_ADC: |
| 543 | case MAX77693_MUIC_IRQ_INT1_ADC_LOW: |
| 544 | case MAX77693_MUIC_IRQ_INT1_ADC_ERR: |
| 545 | case MAX77693_MUIC_IRQ_INT1_ADC1K: |
| 546 | /* Handle all of accessory except for |
| 547 | type of charger accessory */ |
| 548 | curr_adc = info->status[0] & STATUS1_ADC_MASK; |
| 549 | curr_adc >>= STATUS1_ADC_SHIFT; |
| 550 | |
| 551 | /* Check accossory state which is either detached or attached */ |
| 552 | if (curr_adc == MAX77693_MUIC_ADC_OPEN) |
| 553 | attached = false; |
| 554 | |
| 555 | ret = max77693_muic_adc_handler(info, curr_adc, attached); |
| 556 | break; |
| 557 | case MAX77693_MUIC_IRQ_INT2_CHGTYP: |
| 558 | case MAX77693_MUIC_IRQ_INT2_CHGDETREUN: |
| 559 | case MAX77693_MUIC_IRQ_INT2_DCDTMR: |
| 560 | case MAX77693_MUIC_IRQ_INT2_DXOVP: |
| 561 | case MAX77693_MUIC_IRQ_INT2_VBVOLT: |
| 562 | case MAX77693_MUIC_IRQ_INT2_VIDRM: |
| 563 | /* Handle charger accessory */ |
| 564 | curr_chg_type = info->status[1] & STATUS2_CHGTYP_MASK; |
| 565 | curr_chg_type >>= STATUS2_CHGTYP_SHIFT; |
| 566 | |
| 567 | /* Check charger accossory state which |
| 568 | is either detached or attached */ |
| 569 | if (curr_chg_type == MAX77693_CHARGER_TYPE_NONE) |
| 570 | attached = false; |
| 571 | |
| 572 | ret = max77693_muic_chg_handler(info, curr_chg_type, attached); |
| 573 | break; |
| 574 | case MAX77693_MUIC_IRQ_INT3_EOC: |
| 575 | case MAX77693_MUIC_IRQ_INT3_CGMBC: |
| 576 | case MAX77693_MUIC_IRQ_INT3_OVP: |
| 577 | case MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR: |
| 578 | case MAX77693_MUIC_IRQ_INT3_CHG_ENABLED: |
| 579 | case MAX77693_MUIC_IRQ_INT3_BAT_DET: |
| 580 | break; |
| 581 | default: |
| 582 | dev_err(info->dev, "muic interrupt: irq %d occurred\n", |
| 583 | irq_type); |
| 584 | break; |
| 585 | } |
| 586 | |
| 587 | if (ret < 0) |
| 588 | dev_err(info->dev, "failed to handle MUIC interrupt\n"); |
| 589 | |
| 590 | mutex_unlock(&info->mutex); |
| 591 | |
| 592 | return; |
| 593 | } |
| 594 | |
| 595 | static irqreturn_t max77693_muic_irq_handler(int irq, void *data) |
| 596 | { |
| 597 | struct max77693_muic_info *info = data; |
| 598 | |
| 599 | info->irq = irq; |
| 600 | schedule_work(&info->irq_work); |
| 601 | |
| 602 | return IRQ_HANDLED; |
| 603 | } |
| 604 | |
| 605 | static struct regmap_config max77693_muic_regmap_config = { |
| 606 | .reg_bits = 8, |
| 607 | .val_bits = 8, |
| 608 | }; |
| 609 | |
| 610 | static int max77693_muic_detect_accessory(struct max77693_muic_info *info) |
| 611 | { |
| 612 | int ret = 0; |
| 613 | int adc, chg_type; |
| 614 | |
| 615 | mutex_lock(&info->mutex); |
| 616 | |
| 617 | /* Read STATUSx register to detect accessory */ |
| 618 | ret = max77693_bulk_read(info->max77693->regmap_muic, |
| 619 | MAX77693_MUIC_REG_STATUS1, 2, info->status); |
| 620 | if (ret) { |
| 621 | dev_err(info->dev, "failed to read MUIC register\n"); |
| 622 | mutex_unlock(&info->mutex); |
| 623 | return -EINVAL; |
| 624 | } |
| 625 | |
| 626 | adc = info->status[0] & STATUS1_ADC_MASK; |
| 627 | adc >>= STATUS1_ADC_SHIFT; |
| 628 | |
| 629 | if (adc != MAX77693_MUIC_ADC_OPEN) { |
| 630 | dev_info(info->dev, |
| 631 | "external connector is attached (adc:0x%02x)\n", adc); |
| 632 | |
| 633 | ret = max77693_muic_adc_handler(info, adc, true); |
| 634 | if (ret < 0) |
| 635 | dev_err(info->dev, "failed to detect accessory\n"); |
| 636 | goto out; |
| 637 | } |
| 638 | |
| 639 | chg_type = info->status[1] & STATUS2_CHGTYP_MASK; |
| 640 | chg_type >>= STATUS2_CHGTYP_SHIFT; |
| 641 | |
| 642 | if (chg_type != MAX77693_CHARGER_TYPE_NONE) { |
| 643 | dev_info(info->dev, |
| 644 | "external connector is attached (chg_type:0x%x)\n", |
| 645 | chg_type); |
| 646 | |
| 647 | max77693_muic_chg_handler(info, chg_type, true); |
| 648 | if (ret < 0) |
| 649 | dev_err(info->dev, "failed to detect charger accessory\n"); |
| 650 | } |
| 651 | |
| 652 | out: |
| 653 | mutex_unlock(&info->mutex); |
| 654 | return ret; |
| 655 | } |
| 656 | |
| 657 | static int __devinit max77693_muic_probe(struct platform_device *pdev) |
| 658 | { |
| 659 | struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent); |
| 660 | struct max77693_muic_info *info; |
| 661 | int ret, i; |
| 662 | u8 id; |
| 663 | |
| 664 | info = kzalloc(sizeof(struct max77693_muic_info), GFP_KERNEL); |
| 665 | if (!info) { |
| 666 | dev_err(&pdev->dev, "failed to allocate memory\n"); |
| 667 | ret = -ENOMEM; |
| 668 | goto err_kfree; |
| 669 | } |
| 670 | info->dev = &pdev->dev; |
| 671 | info->max77693 = max77693; |
| 672 | info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic, |
| 673 | &max77693_muic_regmap_config); |
| 674 | if (IS_ERR(info->max77693->regmap_muic)) { |
| 675 | ret = PTR_ERR(info->max77693->regmap_muic); |
| 676 | dev_err(max77693->dev, |
| 677 | "failed to allocate register map: %d\n", ret); |
| 678 | goto err_regmap; |
| 679 | } |
| 680 | platform_set_drvdata(pdev, info); |
| 681 | mutex_init(&info->mutex); |
| 682 | |
| 683 | INIT_WORK(&info->irq_work, max77693_muic_irq_work); |
| 684 | |
| 685 | /* Support irq domain for MAX77693 MUIC device */ |
| 686 | for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) { |
| 687 | struct max77693_muic_irq *muic_irq = &muic_irqs[i]; |
| 688 | int virq = 0; |
| 689 | |
| 690 | virq = irq_create_mapping(max77693->irq_domain, muic_irq->irq); |
| 691 | if (!virq) |
| 692 | goto err_irq; |
| 693 | muic_irq->virq = virq; |
| 694 | |
| 695 | ret = request_threaded_irq(virq, NULL, |
| 696 | max77693_muic_irq_handler, |
| 697 | 0, muic_irq->name, info); |
| 698 | if (ret) { |
| 699 | dev_err(&pdev->dev, |
| 700 | "failed: irq request (IRQ: %d," |
| 701 | " error :%d)\n", |
| 702 | muic_irq->irq, ret); |
| 703 | |
| 704 | for (i = i - 1; i >= 0; i--) |
| 705 | free_irq(muic_irq->virq, info); |
| 706 | goto err_irq; |
| 707 | } |
| 708 | } |
| 709 | |
| 710 | /* Initialize extcon device */ |
| 711 | info->edev = kzalloc(sizeof(struct extcon_dev), GFP_KERNEL); |
| 712 | if (!info->edev) { |
| 713 | dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); |
| 714 | ret = -ENOMEM; |
| 715 | goto err_irq; |
| 716 | } |
| 717 | info->edev->name = DEV_NAME; |
| 718 | info->edev->supported_cable = max77693_extcon_cable; |
| 719 | ret = extcon_dev_register(info->edev, NULL); |
| 720 | if (ret) { |
| 721 | dev_err(&pdev->dev, "failed to register extcon device\n"); |
| 722 | goto err_extcon; |
| 723 | } |
| 724 | |
| 725 | /* Check revision number of MUIC device*/ |
| 726 | ret = max77693_read_reg(info->max77693->regmap_muic, |
| 727 | MAX77693_MUIC_REG_ID, &id); |
| 728 | if (ret < 0) { |
| 729 | dev_err(&pdev->dev, "failed to read revision number\n"); |
| 730 | goto err_extcon; |
| 731 | } |
| 732 | dev_info(info->dev, "device ID : 0x%x\n", id); |
| 733 | |
| 734 | /* Set ADC debounce time */ |
| 735 | max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); |
| 736 | |
| 737 | /* Detect accessory on boot */ |
| 738 | max77693_muic_detect_accessory(info); |
| 739 | |
| 740 | return ret; |
| 741 | |
| 742 | err_extcon: |
| 743 | kfree(info->edev); |
| 744 | err_irq: |
| 745 | err_regmap: |
| 746 | kfree(info); |
| 747 | err_kfree: |
| 748 | return ret; |
| 749 | } |
| 750 | |
| 751 | static int __devexit max77693_muic_remove(struct platform_device *pdev) |
| 752 | { |
| 753 | struct max77693_muic_info *info = platform_get_drvdata(pdev); |
| 754 | int i; |
| 755 | |
| 756 | for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) |
| 757 | free_irq(muic_irqs[i].virq, info); |
| 758 | cancel_work_sync(&info->irq_work); |
| 759 | extcon_dev_unregister(info->edev); |
| 760 | kfree(info); |
| 761 | |
| 762 | return 0; |
| 763 | } |
| 764 | |
| 765 | static struct platform_driver max77693_muic_driver = { |
| 766 | .driver = { |
| 767 | .name = DEV_NAME, |
| 768 | .owner = THIS_MODULE, |
| 769 | }, |
| 770 | .probe = max77693_muic_probe, |
| 771 | .remove = __devexit_p(max77693_muic_remove), |
| 772 | }; |
| 773 | |
| 774 | module_platform_driver(max77693_muic_driver); |
| 775 | |
| 776 | MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver"); |
| 777 | MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); |
| 778 | MODULE_LICENSE("GPL"); |
| 779 | MODULE_ALIAS("platform:extcon-max77693"); |