Blame - drivers/regulator/Kconfig - SHIFTPHONES/mainline/linux

blob: 9d84d9245490e8ebbf7dd151ea96873064ff1e54 [file] [log] [blame]

Thomas Gleixner	ec8f24b	2019-05-19 13:07:45 +0100	[diff] [blame]	1	# SPDX-License-Identifier: GPL-2.0-only
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	2	menuconfig REGULATOR
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	3	bool "Voltage and Current Regulator Support"
Matti Vaittinen	60ab7f4	2020-05-08 18:43:36 +0300	[diff] [blame]	4	select LINEAR_RANGES
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	5	help
				6	Generic Voltage and Current Regulator support.
				7
				8	This framework is designed to provide a generic interface to voltage
				9	and current regulators within the Linux kernel. It's intended to
				10	provide voltage and current control to client or consumer drivers and
				11	also provide status information to user space applications through a
				12	sysfs interface.
				13
				14	The intention is to allow systems to dynamically control regulator
				15	output in order to save power and prolong battery life. This applies
				16	to both voltage regulators (where voltage output is controllable) and
				17	current sinks (where current output is controllable).
				18
				19	This framework safely compiles out if not selected so that client
				20	drivers can still be used in systems with no software controllable
				21	regulators.
				22
				23	If unsure, say no.
				24
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	25
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	26	if REGULATOR
				27
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	28	config REGULATOR_DEBUG
				29	bool "Regulator debug support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	30	help
				31	Say yes here to enable debugging support.
				32
				33	config REGULATOR_FIXED_VOLTAGE
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	34	tristate "Fixed voltage regulator support"
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	35	help
				36	This driver provides support for fixed voltage regulators,
				37	useful for systems which use a combination of software
				38	managed regulators and simple non-configurable regulators.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	39
				40	config REGULATOR_VIRTUAL_CONSUMER
				41	tristate "Virtual regulator consumer support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	42	help
				43	This driver provides a virtual consumer for the voltage and
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	44	current regulator API which provides sysfs controls for
				45	configuring the supplies requested. This is mainly useful
				46	for test purposes.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	47
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	48	If unsure, say no.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	49
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	50	config REGULATOR_USERSPACE_CONSUMER
				51	tristate "Userspace regulator consumer support"
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	52	help
				53	There are some classes of devices that are controlled entirely
Michael Prokop	6f2653e	2009-09-05 02:59:14 +0200	[diff] [blame]	54	from user space. Userspace consumer driver provides ability to
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	55	control power supplies for such devices.
				56
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	57	If unsure, say no.
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	58
Alexander Monakov	a265b03	2018-03-09 01:53:03 +0300	[diff] [blame]	59	config REGULATOR_88PG86X
				60	tristate "Marvell 88PG86X voltage regulators"
				61	depends on I2C
				62	select REGMAP_I2C
				63	help
				64	This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
				65	They provide two I2C-controlled DC/DC step-down converters with
				66	sleep mode and separate enable pins.
				67
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	68	config REGULATOR_88PM800
				69	tristate "Marvell 88PM800 Power regulators"
Axel Lin	7c45f60	2013-07-19 09:17:53 +0800	[diff] [blame]	70	depends on MFD_88PM800
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	71	help
				72	This driver supports Marvell 88PM800 voltage regulator chips.
				73	It delivers digitally programmable output,
				74	the voltage is programmed via I2C interface.
				75	It's suitable to support PXA988 chips to control VCC_MAIN and
				76	various voltages.
				77
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	78	config REGULATOR_88PM8607
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	79	tristate "Marvell 88PM8607 Power regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	80	depends on MFD_88PM860X=y
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	81	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	82	This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	83
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	84	config REGULATOR_ACT8865
				85	tristate "Active-semi act8865 voltage regulator"
				86	depends on I2C
YueHaibing	5375f1e	2019-08-07 21:38:22 +0800	[diff] [blame]	87	depends on POWER_SUPPLY
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	88	select REGMAP_I2C
				89	help
				90	This driver controls a active-semi act8865 voltage output
				91	regulator via I2C bus.
				92
Wenyou Yang	38c0996	2016-02-05 12:33:30 +0800	[diff] [blame]	93	config REGULATOR_ACT8945A
				94	tristate "Active-semi ACT8945A voltage regulator"
				95	depends on MFD_ACT8945A
				96	help
				97	This driver controls a active-semi ACT8945A voltage regulator
				98	via I2C bus. The ACT8945A features three step-down DC/DC converters
				99	and four low-dropout linear regulators, along with a ActivePath
				100	battery charger.
				101
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	102	config REGULATOR_AD5398
				103	tristate "Analog Devices AD5398/AD5821 regulators"
				104	depends on I2C
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	105	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	106	This driver supports AD5398 and AD5821 current regulator chips.
				107	If building into module, its name is ad5398.ko.
				108
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	109	config REGULATOR_ANATOP
				110	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Anson Huang	6179b0e	2020-03-02 19:55:18 +0800	[diff] [blame]	111	depends on ARCH_MXC \|\| COMPILE_TEST
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	112	depends on MFD_SYSCON
				113	help
				114	Say y here to support Freescale i.MX on-chip ANATOP LDOs
				115	regulators. It is recommended that this option be
				116	enabled on i.MX6 platform.
				117
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	118	config REGULATOR_AAT2870
				119	tristate "AnalogicTech AAT2870 Regulators"
				120	depends on MFD_AAT2870_CORE
				121	help
				122	If you have a AnalogicTech AAT2870 say Y to enable the
				123	regulator driver.
				124
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	125	config REGULATOR_AB8500
				126	bool "ST-Ericsson AB8500 Power Regulators"
				127	depends on AB8500_CORE
				128	help
				129	This driver supports the regulators found on the ST-Ericsson mixed
				130	signal AB8500 PMIC
				131
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	132	config REGULATOR_ARIZONA_LDO1
Richard Fitzgerald	1f5f11e	2019-05-21 11:04:38 +0100	[diff] [blame]	133	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
				134	depends on MFD_ARIZONA \|\| MFD_MADERA
Mark Brown	e6ed905	2013-01-10 19:14:11 +0000	[diff] [blame]	135	depends on SND_SOC
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	136	help
Richard Fitzgerald	1f5f11e	2019-05-21 11:04:38 +0100	[diff] [blame]	137	Support for the LDO1 regulators found on Cirrus Logic Madera codecs
				138	and Wolfson Microelectronic Arizona codecs.
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	139
				140	config REGULATOR_ARIZONA_MICSUPP
Richard Fitzgerald	7bd7916	2019-05-21 11:04:39 +0100	[diff] [blame]	141	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
				142	depends on MFD_ARIZONA \|\| MFD_MADERA
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	143	depends on SND_SOC
				144	help
Richard Fitzgerald	7bd7916	2019-05-21 11:04:39 +0100	[diff] [blame]	145	Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
				146	and Wolfson Microelectronic Arizona codecs
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	147	devices.
				148
Cristian Marussi	0fbeae7	2020-11-23 20:23:36 +0000	[diff] [blame]	149	config REGULATOR_ARM_SCMI
				150	tristate "SCMI based regulator driver"
				151	depends on ARM_SCMI_PROTOCOL && OF
				152	help
				153	This adds the regulator driver support for ARM platforms using SCMI
				154	protocol for device voltage management.
				155	This driver uses SCMI Message Protocol driver to interact with the
				156	firmware providing the device Voltage functionality.
				157
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	158	config REGULATOR_AS3711
				159	tristate "AS3711 PMIC"
				160	depends on MFD_AS3711
				161	help
				162	This driver provides support for the voltage regulators on the
				163	AS3711 PMIC
				164
Laxman Dewangan	bc40733	2013-09-20 18:00:13 +0530	[diff] [blame]	165	config REGULATOR_AS3722
				166	tristate "AMS AS3722 PMIC Regulators"
				167	depends on MFD_AS3722
				168	help
				169	This driver provides support for the voltage regulators on the
				170	AS3722 PMIC. This will enable support for all the software
				171	controllable DCDC/LDO regulators.
				172
Cristian Ciocaltea	3b15cca	2020-12-29 19:31:19 +0200	[diff] [blame]	173	config REGULATOR_ATC260X
				174	tristate "Actions Semi ATC260x PMIC Regulators"
				175	depends on MFD_ATC260X
				176	help
				177	This driver provides support for the voltage regulators on the
				178	ATC260x PMICs. This will enable support for all the software
				179	controllable DCDC/LDO regulators.
				180
Carlo Caione	dfe7a1b	2014-04-11 11:38:10 +0200	[diff] [blame]	181	config REGULATOR_AXP20X
				182	tristate "X-POWERS AXP20X PMIC Regulators"
				183	depends on MFD_AXP20X
				184	help
				185	This driver provides support for the voltage regulators on the
				186	AXP20X PMIC.
				187
Matt Porter	462c9fc	2014-03-11 11:46:13 -0400	[diff] [blame]	188	config REGULATOR_BCM590XX
				189	tristate "Broadcom BCM590xx PMU Regulators"
				190	depends on MFD_BCM590XX
				191	help
				192	This driver provides support for the voltage regulators on the
				193	BCM590xx PMUs. This will enable support for the software
				194	controllable LDO/Switching regulators.
				195
Matti Vaittinen	99ea37b	2019-01-22 11:46:08 +0200	[diff] [blame]	196	config REGULATOR_BD70528
				197	tristate "ROHM BD70528 Power Regulator"
				198	depends on MFD_ROHM_BD70528
				199	help
				200	This driver supports voltage regulators on ROHM BD70528 PMIC.
				201	This will enable support for the software controllable buck
				202	and LDO regulators.
				203
				204	This driver can also be built as a module. If so, the module
				205	will be called bd70528-regulator.
				206
Matti Vaittinen	1aad390	2021-04-05 14:44:16 +0300	[diff] [blame]	207	config REGULATOR_BD71815
				208	tristate "ROHM BD71815 Power Regulator"
				209	depends on MFD_ROHM_BD71828
				210	help
				211	This driver supports voltage regulators on ROHM BD71815 PMIC.
				212	This will enable support for the software controllable buck
				213	and LDO regulators and a current regulator for LEDs.
				214
				215	This driver can also be built as a module. If so, the module
				216	will be called bd71815-regulator.
				217
Matti Vaittinen	522498f	2019-12-11 11:46:11 +0200	[diff] [blame]	218	config REGULATOR_BD71828
				219	tristate "ROHM BD71828 Power Regulator"
				220	depends on MFD_ROHM_BD71828
				221	select REGULATOR_ROHM
				222	help
				223	This driver supports voltage regulators on ROHM BD71828 PMIC.
				224	This will enable support for the software controllable buck
				225	and LDO regulators.
				226
				227	This driver can also be built as a module. If so, the module
				228	will be called bd71828-regulator.
				229
Matti Vaittinen	410e8b4	2018-07-30 14:50:08 +0300	[diff] [blame]	230	config REGULATOR_BD718XX
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	231	tristate "ROHM BD71837 Power Regulator"
Matti Vaittinen	410e8b4	2018-07-30 14:50:08 +0300	[diff] [blame]	232	depends on MFD_ROHM_BD718XX
Matti Vaittinen	21b7215	2020-01-20 15:44:45 +0200	[diff] [blame]	233	select REGULATOR_ROHM
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	234	help
				235	This driver supports voltage regulators on ROHM BD71837 PMIC.
				236	This will enable support for the software controllable buck
				237	and LDO regulators.
				238
				239	This driver can also be built as a module. If so, the module
Matti Vaittinen	2ece646	2018-09-14 11:34:02 +0300	[diff] [blame]	240	will be called bd718x7-regulator.
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	241
Marek Vasut	e85c5a1	2017-04-24 17:21:30 +0200	[diff] [blame]	242	config REGULATOR_BD9571MWV
				243	tristate "ROHM BD9571MWV Regulators"
				244	depends on MFD_BD9571MWV
				245	help
				246	This driver provides support for the voltage regulators on the
				247	ROHM BD9571MWV PMIC. This will enable support for the software
				248	controllable regulator and voltage sampling units.
				249
				250	This driver can also be built as a module. If so, the module
				251	will be called bd9571mwv-regulator.
				252
Matti Vaittinen	b014e9f	2020-09-17 11:03:31 +0300	[diff] [blame]	253	config REGULATOR_BD957XMUF
				254	tristate "ROHM BD9576MUF and BD9573MUF Regulators"
				255	depends on MFD_ROHM_BD957XMUF
				256	help
				257	This driver supports voltage regulators on ROHM BD9576MUF and
				258	BD9573MUF PMICs.
				259
				260	This driver can also be built as a module. If so, the module
				261	will be called bd9576-regulator.
				262
Tony Lindgren	0ad4c07	2017-02-02 15:43:57 -0800	[diff] [blame]	263	config REGULATOR_CPCAP
				264	tristate "Motorola CPCAP regulator"
				265	depends on MFD_CPCAP
				266	help
				267	Say y here for CPCAP regulator found on some Motorola phones
				268	and tablets such as Droid 4.
				269
Pi-Hsun Shih	8d9f8d5	2020-06-12 12:05:20 +0800	[diff] [blame]	270	config REGULATOR_CROS_EC
				271	tristate "ChromeOS EC regulators"
				272	depends on CROS_EC && OF
				273	help
				274	This driver supports voltage regulators that is connected to ChromeOS
				275	EC and controlled through EC host commands.
				276
				277	This driver can also be built as a module. If so, the module
				278	will be called cros-ec-regulator.
				279
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	280	config REGULATOR_DA903X
				281	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
				282	depends on PMIC_DA903X
Arnd Bergmann	0077aaa	2019-03-07 11:26:02 +0100	[diff] [blame]	283	depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	284	help
				285	Say y here to support the BUCKs and LDOs regulators found on
				286	Dialog Semiconductor DA9030/DA9034 PMIC.
				287
				288	config REGULATOR_DA9052
				289	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
				290	depends on PMIC_DA9052
				291	help
				292	This driver supports the voltage regulators of DA9052-BC and
				293	DA9053-AA/Bx PMIC.
				294
Ashish Jangam	f6130be	2012-11-01 13:57:56 +0530	[diff] [blame]	295	config REGULATOR_DA9055
				296	tristate "Dialog Semiconductor DA9055 regulators"
				297	depends on MFD_DA9055
				298	help
				299	Say y here to support the BUCKs and LDOs regulators found on
				300	Dialog Semiconductor DA9055 PMIC.
				301
				302	This driver can also be built as a module. If so, the module
				303	will be called da9055-regulator.
				304
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	305	config REGULATOR_DA9062
Steve Twiss	4b7f495	2017-06-07 09:13:48 +0100	[diff] [blame]	306	tristate "Dialog Semiconductor DA9061/62 regulators"
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	307	depends on MFD_DA9062
				308	help
				309	Say y here to support the BUCKs and LDOs regulators found on
Steve Twiss	4b7f495	2017-06-07 09:13:48 +0100	[diff] [blame]	310	DA9061 and DA9062 PMICs.
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	311
				312	This driver can also be built as a module. If so, the module
				313	will be called da9062-regulator.
				314
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	315	config REGULATOR_DA9063
				316	tristate "Dialog Semiconductor DA9063 regulators"
Wolfram Sang	973af54	2019-05-20 11:34:46 +0200	[diff] [blame]	317	depends on MFD_DA9063 && OF
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	318	help
				319	Say y here to support the BUCKs and LDOs regulators found on
				320	DA9063 PMICs.
				321
				322	This driver can also be built as a module. If so, the module
				323	will be called da9063-regulator.
				324
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	325	config REGULATOR_DA9121
Adam Ward	c860476	2020-11-30 16:59:08 +0000	[diff] [blame]	326	tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	327	depends on I2C && OF
				328	select REGMAP_I2C
				329	help
				330	Say y here to support for the Dialog Semiconductor DA9121. The
Adam Ward	c860476	2020-11-30 16:59:08 +0000	[diff] [blame]	331	DA9121 is a single channel dual-phase buck converter controlled
				332	through an I2C interface.
				333
				334	DA9121 Single-channel dual-phase 10A buck converter
				335	DA9130 Single-channel dual-phase 10A buck converter (Automotive)
				336	DA9217 Single-channel dual-phase 6A buck converter
				337	DA9122 Dual-channel single-phase 5A buck converter
				338	DA9131 Dual-channel single-phase 5A buck converter (Automotive)
				339	DA9220 Dual-channel single-phase 3A buck converter
				340	DA9132 Dual-channel single-phase 3A buck converter (Automotive)
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	341
				342	This driver can also be built as a module. If so, the module
				343	will be called da9121-regulator.
				344
Steve Twiss	16f1091	2013-08-06 15:30:48 +0100	[diff] [blame]	345	config REGULATOR_DA9210
				346	tristate "Dialog Semiconductor DA9210 regulator"
				347	depends on I2C
				348	select REGMAP_I2C
				349	help
				350	Say y here to support for the Dialog Semiconductor DA9210.
				351	The DA9210 is a multi-phase synchronous step down
				352	converter 12A DC-DC Buck controlled through an I2C
				353	interface.
				354
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	355	config REGULATOR_DA9211
James Ban	707ce9e	2017-10-30 11:32:38 +0900	[diff] [blame]	356	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	357	depends on I2C
				358	select REGMAP_I2C
				359	help
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	360	Say y here to support for the Dialog Semiconductor DA9211/DA9212
James Ban	7bd3935	2015-06-30 13:39:39 +0900	[diff] [blame]	361	/DA9213/DA9214/DA9215.
				362	The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	363	step down converter 12A or 16A DC-DC Buck controlled through an I2C
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	364	interface.
				365
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	366	config REGULATOR_DBX500_PRCMU
				367	bool
				368
				369	config REGULATOR_DB8500_PRCMU
				370	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
				371	depends on MFD_DB8500_PRCMU
				372	select REGULATOR_DBX500_PRCMU
				373	help
				374	This driver supports the voltage domain regulators controlled by the
				375	DB8500 PRCMU
				376
Yunfan Zhang	49d8c59	2012-09-08 03:52:18 -0700	[diff] [blame]	377	config REGULATOR_FAN53555
				378	tristate "Fairchild FAN53555 Regulator"
				379	depends on I2C
				380	select REGMAP_I2C
				381	help
				382	This driver supports Fairchild FAN53555 Digitally Programmable
				383	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
				384	regulator that delivers a digitally programmable output from an
				385	input voltage supply of 2.5V to 5.5V. The output voltage is
				386	programmed through an I2C interface.
				387
Christoph Fritz	e6dea51	2020-07-02 23:08:45 +0200	[diff] [blame]	388	config REGULATOR_FAN53880
				389	tristate "Fairchild FAN53880 Regulator"
Christoph Fritz	318b8a0	2020-07-07 12:57:31 +0200	[diff] [blame]	390	depends on I2C && (OF \|\| COMPILE_TEST)
Christoph Fritz	e6dea51	2020-07-02 23:08:45 +0200	[diff] [blame]	391	select REGMAP_I2C
				392	help
				393	This driver supports Fairchild (ON Semiconductor) FAN53880
				394	regulator. The regulator is a programmable power management IC
				395	(PMIC), it is controlled by I2C and provides one BUCK, one BOOST
				396	and four LDO outputs.
				397
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	398	config REGULATOR_GPIO
				399	tristate "GPIO regulator support"
Geert Uytterhoeven	9eac5fd	2015-05-05 18:32:32 +0200	[diff] [blame]	400	depends on GPIOLIB \|\| COMPILE_TEST
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	401	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	402	This driver provides support for regulators that can be
				403	controlled via gpios.
				404	It is capable of supporting current and voltage regulators
				405	and the platform has to provide a mapping of GPIO-states
				406	to target volts/amps.
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	407
Guodong Xu	87ca186	2014-08-13 19:33:42 +0800	[diff] [blame]	408	config REGULATOR_HI6421
				409	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
				410	depends on MFD_HI6421_PMIC && OF
				411	help
				412	This driver provides support for the voltage regulators on the
				413	HiSilicon Hi6421 PMU / Codec IC.
				414	Hi6421 is a multi-function device which, on regulator part, provides
				415	21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
				416	of them come with support to either ECO (idle) or sleep mode.
				417
Wang Xiaoyin	5c7024a	2017-06-07 15:06:03 +0800	[diff] [blame]	418	config REGULATOR_HI6421V530
				419	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
				420	depends on MFD_HI6421_PMIC && OF
				421	help
				422	This driver provides support for the voltage regulators on
				423	HiSilicon Hi6421v530 PMU / Codec IC.
				424	Hi6421v530 is a multi-function device which, on regulator part,
				425	provides 5 general purpose LDOs, and all of them come with support
				426	to either ECO (idle) or sleep mode.
				427
Chen Feng	4618119	2016-02-14 14:29:22 +0800	[diff] [blame]	428	config REGULATOR_HI655X
				429	tristate "Hisilicon HI655X PMIC regulators support"
				430	depends on ARCH_HISI \|\| COMPILE_TEST
				431	depends on MFD_HI655X_PMIC && OF
				432	help
				433	This driver provides support for the voltage regulators of the
				434	Hisilicon Hi655x PMIC device.
				435
Mauro Carvalho Chehab	507614b	2021-03-25 19:05:37 +0100	[diff] [blame]	436	config REGULATOR_HI6421V600
				437	tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
				438	depends on MFD_HI6421_SPMI && OF
				439	select REGMAP
				440	help
				441	This driver provides support for the voltage regulators on
				442	HiSilicon Hi6421v600 PMU / Codec IC.
				443	This is used on Kirin 3670 boards, like HiKey 970.
				444
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	445	config REGULATOR_ISL9305
				446	tristate "Intersil ISL9305 regulator"
				447	depends on I2C
Axel Lin	ba441ec	2014-09-10 08:44:36 +0800	[diff] [blame]	448	select REGMAP_I2C
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	449	help
				450	This driver supports ISL9305 voltage regulator chip.
				451
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	452	config REGULATOR_ISL6271A
				453	tristate "Intersil ISL6271A Power regulator"
				454	depends on I2C
				455	help
				456	This driver supports ISL6271A voltage regulator chip.
				457
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	458	config REGULATOR_LM363X
				459	tristate "TI LM363X voltage regulators"
				460	depends on MFD_TI_LMU
				461	help
Dan Murphy	bff5e80	2019-06-05 07:56:32 -0500	[diff] [blame]	462	This driver supports LM3631, LM3632 and LM36274 voltage regulators for
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	463	the LCD bias.
				464	One boost output voltage is configurable and always on.
				465	Other LDOs are used for the display module.
				466
Charles Keepax	bef9391	2018-10-08 14:25:41 +0100	[diff] [blame]	467	config REGULATOR_LOCHNAGAR
				468	tristate "Cirrus Logic Lochnagar regulator driver"
				469	depends on MFD_LOCHNAGAR
				470	help
				471	This enables regulator support on the Cirrus Logic Lochnagar audio
				472	development board.
				473
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	474	config REGULATOR_LP3971
				475	tristate "National Semiconductors LP3971 PMIC regulator driver"
				476	depends on I2C
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	477	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	478	Say Y here to support the voltage regulators and convertors
				479	on National Semiconductors LP3971 PMIC
				480
				481	config REGULATOR_LP3972
				482	tristate "National Semiconductors LP3972 PMIC regulator driver"
				483	depends on I2C
				484	help
				485	Say Y here to support the voltage regulators and convertors
				486	on National Semiconductors LP3972 PMIC
				487
				488	config REGULATOR_LP872X
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	489	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin	613965f	2013-08-30 22:13:44 +0800	[diff] [blame]	490	depends on I2C
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	491	select REGMAP_I2C
				492	help
				493	This driver supports LP8720/LP8725 PMIC
				494
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	495	config REGULATOR_LP873X
				496	tristate "TI LP873X Power regulators"
Keerthy	f618ed2	2016-08-31 14:28:12 +0530	[diff] [blame]	497	depends on MFD_TI_LP873X && OF
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	498	help
				499	This driver supports LP873X voltage regulator chips. LP873X
				500	provides two step-down converters and two general-purpose LDO
				501	voltage regulators. It supports software based voltage control
				502	for different voltage domains
				503
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	504	config REGULATOR_LP8755
				505	tristate "TI LP8755 High Performance PMU driver"
				506	depends on I2C
				507	select REGMAP_I2C
				508	help
				509	This driver supports LP8755 High Performance PMU driver. This
				510	chip contains six step-down DC/DC converters which can support
				511	9 mode multiphase configuration.
				512
Keerthy	f0168a9	2017-05-23 17:46:55 +0530	[diff] [blame]	513	config REGULATOR_LP87565
				514	tristate "TI LP87565 Power regulators"
				515	depends on MFD_TI_LP87565 && OF
				516	help
				517	This driver supports LP87565 voltage regulator chips. LP87565
				518	provides four step-down converters. It supports software based
				519	voltage control for different voltage domains
				520
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	521	config REGULATOR_LP8788
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	522	tristate "TI LP8788 Power Regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	523	depends on MFD_LP8788
				524	help
				525	This driver supports LP8788 voltage regulator chip.
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	526
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	527	config REGULATOR_LTC3589
Axel Lin	ac1d686	2014-05-27 13:51:49 +0800	[diff] [blame]	528	tristate "LTC3589 8-output voltage regulator"
				529	depends on I2C
				530	select REGMAP_I2C
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	531	help
				532	This enables support for the LTC3589, LTC3589-1, and LTC3589-2
				533	8-output regulators controlled via I2C.
				534
Tim Harvey	37b918a	2016-08-15 12:40:23 -0700	[diff] [blame]	535	config REGULATOR_LTC3676
				536	tristate "LTC3676 8-output voltage regulator"
				537	depends on I2C
				538	select REGMAP_I2C
				539	help
				540	This enables support for the LTC3676
				541	8-output regulators controlled via I2C.
				542
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	543	config REGULATOR_MAX14577
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	544	tristate "Maxim 14577/77836 regulator"
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	545	depends on MFD_MAX14577
				546	help
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	547	This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
				548	The MAX14577 regulators include safeout LDO and charger current
				549	regulator. The MAX77836 has two additional LDOs.
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	550
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	551	config REGULATOR_MAX1586
				552	tristate "Maxim 1586/1587 voltage regulator"
				553	depends on I2C
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	554	help
				555	This driver controls a Maxim 1586 or 1587 voltage output
				556	regulator via I2C bus. The provided regulator is suitable
				557	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
				558
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	559	config REGULATOR_MAX77620
				560	tristate "Maxim 77620/MAX20024 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	561	depends on MFD_MAX77620 \|\| COMPILE_TEST
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	562	help
				563	This driver controls Maxim MAX77620 voltage output regulator
				564	via I2C bus. The provided regulator is suitable for Tegra
				565	chip to control Step-Down DC-DC and LDOs. Say Y here to
				566	enable the regulator driver.
				567
Bartosz Golaszewski	bcc61f1	2019-01-29 14:35:40 +0100	[diff] [blame]	568	config REGULATOR_MAX77650
				569	tristate "Maxim MAX77650/77651 regulator support"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	570	depends on MFD_MAX77650 \|\| COMPILE_TEST
Bartosz Golaszewski	bcc61f1	2019-01-29 14:35:40 +0100	[diff] [blame]	571	help
				572	Regulator driver for MAX77650/77651 PMIC from Maxim
				573	Semiconductor. This device has a SIMO with three independent
				574	power rails and an LDO.
				575
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	576	config REGULATOR_MAX8649
				577	tristate "Maxim 8649 voltage regulator"
				578	depends on I2C
Jonghwan Choi	c5b68d47	2011-10-24 22:26:26 +0900	[diff] [blame]	579	select REGMAP_I2C
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	580	help
				581	This driver controls a Maxim 8649 voltage output regulator via
				582	I2C bus.
				583
Wolfram Sang	27f37e4	2009-09-25 09:39:26 +0200	[diff] [blame]	584	config REGULATOR_MAX8660
				585	tristate "Maxim 8660/8661 voltage regulator"
				586	depends on I2C
				587	help
				588	This driver controls a Maxim 8660/8661 voltage output
				589	regulator via I2C bus.
				590
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	591	config REGULATOR_MAX8907
				592	tristate "Maxim 8907 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	593	depends on MFD_MAX8907 \|\| COMPILE_TEST
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	594	help
				595	This driver controls a Maxim 8907 voltage output regulator
				596	via I2C bus. The provided regulator is suitable for Tegra
				597	chip to control Step-Down DC-DC and LDOs.
				598
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	599	config REGULATOR_MAX8925
				600	tristate "Maxim MAX8925 Power Management IC"
				601	depends on MFD_MAX8925
				602	help
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	603	Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	604
MyungJoo Ham	202f4f5	2010-08-20 14:43:56 +0900	[diff] [blame]	605	config REGULATOR_MAX8952
				606	tristate "Maxim MAX8952 Power Management IC"
				607	depends on I2C
				608	help
				609	This driver controls a Maxim 8952 voltage output regulator
				610	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
				611	modes ranging from 0.77V to 1.40V by 0.01V steps.
				612
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	613	config REGULATOR_MAX8973
				614	tristate "Maxim MAX8973 voltage regulator "
				615	depends on I2C
Laxman Dewangan	d2d5437b	2016-04-13 15:29:45 +0530	[diff] [blame]	616	depends on THERMAL && THERMAL_OF
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	617	select REGMAP_I2C
				618	help
				619	The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	620	switching regulator delivers up to 9A of output current. Each
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	621	phase operates at a 2MHz fixed frequency with a 120 deg shift
				622	from the adjacent phase, allowing the use of small magnetic component.
				623
MyungJoo Ham	bd6ca2c	2011-03-11 11:34:44 +0900	[diff] [blame]	624	config REGULATOR_MAX8997
				625	tristate "Maxim 8997/8966 regulator"
				626	depends on MFD_MAX8997
				627	help
				628	This driver controls a Maxim 8997/8966 regulator
				629	via I2C bus. The provided regulator is suitable for S5PC110,
				630	S5PV210, and Exynos-4 chips to control VCC_CORE and
				631	VCC_USIM voltages.
				632
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	633	config REGULATOR_MAX8998
				634	tristate "Maxim 8998 voltage regulator"
Marek Szyprowski	69f7100	2010-06-21 10:04:23 +0200	[diff] [blame]	635	depends on MFD_MAX8998
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	636	help
				637	This driver controls a Maxim 8998 voltage output regulator
				638	via I2C bus. The provided regulator is suitable for S3C6410
				639	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
				640
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	641	config REGULATOR_MAX77686
				642	tristate "Maxim 77686 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	643	depends on MFD_MAX77686 \|\| COMPILE_TEST
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	644	help
				645	This driver controls a Maxim 77686 regulator
				646	via I2C bus. The provided regulator is suitable for
				647	Exynos-4 chips to control VARM and VINT voltages.
				648
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	649	config REGULATOR_MAX77693
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	650	tristate "Maxim 77693/77843 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	651	depends on MFD_MAX77693 \|\| MFD_MAX77843 \|\| COMPILE_TEST
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	652	help
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	653	This driver controls a Maxim 77693/77843 regulators via I2C bus.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	654	The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
				655	and one current regulator 'CHARGER'. This is suitable for
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	656	Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	657
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	658	config REGULATOR_MAX77802
				659	tristate "Maxim 77802 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	660	depends on MFD_MAX77686 \|\| COMPILE_TEST
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	661	help
				662	This driver controls a Maxim 77802 regulator
				663	via I2C bus. The provided regulator is suitable for
				664	Exynos5420/Exynos5800 SoCs to control various voltages.
				665	It includes support for control of voltage and ramp speed.
				666
Iskren Chernev	e731465	2020-04-14 20:22:48 +0300	[diff] [blame]	667	config REGULATOR_MAX77826
				668	tristate "Maxim 77826 regulator"
				669	depends on I2C
				670	select REGMAP_I2C
				671	help
				672	This driver controls a Maxim 77826 regulator via I2C bus.
				673	The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
				674	It includes support for control of output voltage. This
				675	regulator is found on the Samsung Galaxy S5 (klte) smartphone.
				676
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	677	config REGULATOR_MC13XXX_CORE
				678	tristate
				679
				680	config REGULATOR_MC13783
				681	tristate "Freescale MC13783 regulator driver"
Alexander Shiyan	e5a3da2	2013-12-14 17:03:10 +0400	[diff] [blame]	682	depends on MFD_MC13XXX
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	683	select REGULATOR_MC13XXX_CORE
				684	help
				685	Say y here to support the regulators found on the Freescale MC13783
				686	PMIC.
				687
				688	config REGULATOR_MC13892
				689	tristate "Freescale MC13892 regulator driver"
				690	depends on MFD_MC13XXX
				691	select REGULATOR_MC13XXX_CORE
				692	help
				693	Say y here to support the regulators found on the Freescale MC13892
				694	PMIC.
				695
Andrei.Stefanescu@microchip.com	919261c	2018-12-12 18:31:18 +0000	[diff] [blame]	696	config REGULATOR_MCP16502
				697	tristate "Microchip MCP16502 PMIC"
				698	depends on I2C && OF
Axel Lin	77ea906	2018-12-21 10:49:29 +0800	[diff] [blame]	699	select REGMAP_I2C
Andrei.Stefanescu@microchip.com	919261c	2018-12-12 18:31:18 +0000	[diff] [blame]	700	help
				701	Say y here to support the MCP16502 PMIC. This driver supports
				702	basic operations (get/set voltage, get/set operating mode)
				703	through the regulator interface. In addition it enables
				704	suspend-to-ram/standby transition.
				705
Saravanan Sekar	a273188	2020-02-04 12:04:18 +0100	[diff] [blame]	706	config REGULATOR_MP5416
				707	tristate "Monolithic MP5416 PMIC"
				708	depends on I2C && OF
				709	select REGMAP_I2C
				710	help
				711	Say y here to support the MP5416 PMIC. This will enable supports
				712	the software controllable 4 buck and 4 LDO regulators.
				713	Say M here if you want to include support for the regulator as a
				714	module.
				715
Markus Reichl	c66f1cb	2020-01-06 22:16:25 +0100	[diff] [blame]	716	config REGULATOR_MP8859
				717	tristate "MPS MP8859 regulator driver"
				718	depends on I2C
				719	select REGMAP_I2C
				720	help
				721	Say y here to support the MP8859 voltage regulator. This driver
				722	supports basic operations (get/set voltage) through the regulator
				723	interface.
				724	Say M here if you want to include support for the regulator as a
				725	module. The module will be named "mp8859".
				726
Jisheng Zhang	97be8288	2020-03-16 22:30:20 +0800	[diff] [blame]	727	config REGULATOR_MP886X
				728	tristate "MPS MP8869 regulator driver"
				729	depends on I2C && (OF \|\| COMPILE_TEST)
				730	select REGMAP_I2C
				731	help
				732	This driver supports the MP8869 voltage regulator.
				733
Saravanan Sekar	6501c1f	2020-01-09 20:53:46 +0100	[diff] [blame]	734	config REGULATOR_MPQ7920
				735	tristate "Monolithic MPQ7920 PMIC"
				736	depends on I2C && OF
				737	select REGMAP_I2C
				738	help
				739	Say y here to support the MPQ7920 PMIC. This will enable supports
				740	the software controllable 4 buck and 5 LDO regulators.
				741	This driver supports the control of different power rails of device
				742	through regulator interface.
				743
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	744	config REGULATOR_MT6311
				745	tristate "MediaTek MT6311 PMIC"
				746	depends on I2C
Henry Chen	aab3c3f	2015-11-17 16:36:49 +0800	[diff] [blame]	747	select REGMAP_I2C
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	748	help
				749	Say y here to select this option to enable the power regulator of
				750	MediaTek MT6311 PMIC.
				751	This driver supports the control of different power rails of device
				752	through regulator interface.
				753
Hsin-Hsiung Wang	7aa382c	2021-02-07 14:14:16 +0800	[diff] [blame]	754	config REGULATOR_MT6315
				755	tristate "MediaTek MT6315 PMIC"
				756	depends on SPMI
				757	select REGMAP_SPMI
				758	help
				759	Say y here to select this option to enable the power regulator of
				760	MediaTek MT6315 PMIC.
				761	This driver supports the control of different power rails of device
				762	through regulator interface.
				763
Chen Zhong	2fdf829	2016-07-18 14:40:51 +0200	[diff] [blame]	764	config REGULATOR_MT6323
				765	tristate "MediaTek MT6323 PMIC"
				766	depends on MFD_MT6397
				767	help
				768	Say y here to select this option to enable the power regulator of
				769	MediaTek MT6323 PMIC.
				770	This driver supports the control of different power rails of device
				771	through regulator interface.
				772
Hsin-Hsiung Wang	f67ff1b	2019-08-23 11:45:28 +0800	[diff] [blame]	773	config REGULATOR_MT6358
				774	tristate "MediaTek MT6358 PMIC"
Axel Lin	1b3bcca	2020-06-16 21:50:30 +0800	[diff] [blame]	775	depends on MFD_MT6397
Hsin-Hsiung Wang	f67ff1b	2019-08-23 11:45:28 +0800	[diff] [blame]	776	help
				777	Say y here to select this option to enable the power regulator of
				778	MediaTek MT6358 PMIC.
				779	This driver supports the control of different power rails of device
				780	through regulator interface.
				781
Gene Chen	d321571	2020-08-26 18:49:17 +0800	[diff] [blame]	782	config REGULATOR_MT6360
				783	tristate "MT6360 SubPMIC Regulator"
				784	depends on MFD_MT6360
				785	help
				786	Say Y here to enable MT6360 regulator support.
				787	This is support MT6360 PMIC/LDO part include
				788	2-channel buck with Thermal Shutdown and Overload Protection
				789	6-channel High PSRR and Low Dropout LDO.
				790
Chenglin Xu	a551e27	2017-08-15 17:09:15 +0800	[diff] [blame]	791	config REGULATOR_MT6380
				792	tristate "MediaTek MT6380 PMIC"
				793	depends on MTK_PMIC_WRAP
				794	help
				795	Say y here to select this option to enable the power regulator of
				796	MediaTek MT6380 PMIC.
				797	This driver supports the control of different power rails of device
				798	through regulator interface.
				799
Flora Fu	0425e24	2014-12-05 12:07:54 +0800	[diff] [blame]	800	config REGULATOR_MT6397
				801	tristate "MediaTek MT6397 PMIC"
				802	depends on MFD_MT6397
				803	help
				804	Say y here to select this option to enable the power regulator of
				805	MediaTek MT6397 PMIC.
				806	This driver supports the control of different power rails of device
				807	through regulator interface.
				808
henryc.chen	a0db6b0	2020-12-24 14:08:52 +0800	[diff] [blame]	809	config REGULATOR_MTK_DVFSRC
				810	tristate "MediaTek DVFSRC regulator driver"
				811	depends on MTK_DVFSRC
				812	help
				813	Say y here to control regulator by DVFSRC (dynamic voltage
				814	and frequency scaling resource collector).
				815	This driver supports to control regulators via the DVFSRC
				816	of Mediatek. It allows for voting on regulator state
				817	between multiple users.
				818
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	819	config REGULATOR_PALMAS
				820	tristate "TI Palmas PMIC Regulators"
				821	depends on MFD_PALMAS
				822	help
				823	If you wish to control the regulators on the Palmas series of
				824	chips say Y here. This will enable support for all the software
				825	controllable SMPS/LDO regulators.
				826
				827	The regulators available on Palmas series chips vary depending
				828	on the muxing. This is handled automatically in the driver by
				829	reading the mux info from OTP.
				830
Balaji T K	11469e0	2014-02-19 20:26:40 +0530	[diff] [blame]	831	config REGULATOR_PBIAS
				832	tristate "PBIAS OMAP regulator driver"
				833	depends on (ARCH_OMAP \|\| COMPILE_TEST) && MFD_SYSCON
				834	help
				835	Say y here to support pbias regulator for mmc1:SD card i/o
				836	on OMAP SoCs.
				837	This driver provides support for OMAP pbias modelled
				838	regulators.
				839
Robin Gong	0935ff5f	2020-07-04 00:19:35 +0800	[diff] [blame]	840	config REGULATOR_PCA9450
				841	tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
				842	depends on I2C
				843	select REGMAP_I2C
				844	help
				845	Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
				846	regulator driver.
				847
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	848	config REGULATOR_PCAP
				849	tristate "Motorola PCAP2 regulator driver"
				850	depends on EZX_PCAP
Sangbeom Kim	62aa492	2012-01-13 10:13:13 +0900	[diff] [blame]	851	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	852	This driver provides support for the voltage regulators of the
				853	PCAP2 PMIC.
Balaji Rao	5ec271e	2009-01-09 01:51:01 +0100	[diff] [blame]	854
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	855	config REGULATOR_PCF50633
				856	tristate "NXP PCF50633 regulator driver"
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	857	depends on MFD_PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	858	help
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	859	Say Y here to support the voltage regulators and converters
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	860	on PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	861
Jagan Teki	d3795d6	2020-11-30 16:53:29 +0530	[diff] [blame]	862	config REGULATOR_PF8X00
				863	tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
				864	depends on I2C && OF
				865	select REGMAP_I2C
				866	help
				867	Say y here to support the regulators found on the NXP
				868	PF8100/PF8121A/PF8200 PMIC.
				869
Adrien Grassein	4d23b84	2021-01-14 18:47:09 +0100	[diff] [blame]	870	Say M here if you want to support for the regulators found
				871	on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
				872	"pf8x00-regulator".
				873
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	874	config REGULATOR_PFUZE100
Stefan Wahren	297101a	2018-06-15 13:44:53 +0200	[diff] [blame]	875	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
Fabio Estevam	6a6939d	2020-12-10 18:27:48 -0300	[diff] [blame]	876	depends on I2C && OF
Axel Lin	94421b0	2013-07-29 12:08:01 +0800	[diff] [blame]	877	select REGMAP_I2C
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	878	help
Axel Lin	2cee212	2014-03-05 18:02:43 +0800	[diff] [blame]	879	Say y here to support the regulators found on the Freescale
Stefan Wahren	297101a	2018-06-15 13:44:53 +0200	[diff] [blame]	880	PFUZE100/200/3000/3001 PMIC.
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	881
James Ban	f307a7e	2015-11-19 09:59:15 +0900	[diff] [blame]	882	config REGULATOR_PV88060
				883	tristate "Powerventure Semiconductor PV88060 regulator"
				884	depends on I2C
				885	select REGMAP_I2C
				886	help
				887	Say y here to support the voltage regulators and convertors
				888	PV88060
				889
James Ban	99cf3af	2016-04-15 13:34:22 +0900	[diff] [blame]	890	config REGULATOR_PV88080
				891	tristate "Powerventure Semiconductor PV88080 regulator"
				892	depends on I2C
				893	select REGMAP_I2C
				894	help
				895	Say y here to support the buck convertors on PV88080
				896
James Ban	c90456e	2015-12-08 10:57:29 +0900	[diff] [blame]	897	config REGULATOR_PV88090
				898	tristate "Powerventure Semiconductor PV88090 regulator"
				899	depends on I2C
				900	select REGMAP_I2C
				901	help
				902	Say y here to support the voltage regulators and convertors
				903	on PV88090
				904
Chris Zhong	aa66cc6	2014-09-28 10:28:53 +0800	[diff] [blame]	905	config REGULATOR_PWM
				906	tristate "PWM voltage regulator"
				907	depends on PWM
				908	help
				909	This driver supports PWM controlled voltage regulators. PWM
				910	duty cycle can increase or decrease the voltage.
				911
Bjorn Andersson	2720386	2014-09-22 16:25:29 -0700	[diff] [blame]	912	config REGULATOR_QCOM_RPM
				913	tristate "Qualcomm RPM regulator driver"
				914	depends on MFD_QCOM_RPM
				915	help
				916	If you say yes to this option, support will be included for the
				917	regulators exposed by the Resource Power Manager found in Qualcomm
				918	8660, 8960 and 8064 based devices.
				919
				920	Say M here if you want to include support for the regulators on the
				921	Qualcomm RPM as a module. The module will be named
				922	"qcom_rpm-regulator".
				923
David Collins	46fc033	2018-07-13 18:50:59 -0700	[diff] [blame]	924	config REGULATOR_QCOM_RPMH
				925	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
John Stultz	34c5aa2	2020-11-23 22:23:59 +0000	[diff] [blame]	926	depends on QCOM_RPMH \|\| (QCOM_RPMH=n && COMPILE_TEST)
Arnd Bergmann	d957d16	2020-12-30 15:56:23 +0100	[diff] [blame]	927	depends on QCOM_COMMAND_DB \|\| (QCOM_COMMAND_DB=n && COMPILE_TEST)
David Collins	46fc033	2018-07-13 18:50:59 -0700	[diff] [blame]	928	help
				929	This driver supports control of PMIC regulators via the RPMh hardware
				930	block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
				931	control allows for voting on regulator state between multiple
				932	processors within the SoC.
				933
Bjorn Andersson	da65e36	2015-08-17 11:43:59 -0700	[diff] [blame]	934	config REGULATOR_QCOM_SMD_RPM
				935	tristate "Qualcomm SMD based RPM regulator driver"
				936	depends on QCOM_SMD_RPM
				937	help
				938	If you say yes to this option, support will be included for the
				939	regulators exposed by the Resource Power Manager found in Qualcomm
				940	8974 based devices.
				941
				942	Say M here if you want to include support for the regulators on the
				943	Qualcomm RPM as a module. The module will be named
				944	"qcom_smd-regulator".
				945
Stephen Boyd	e92a404	2015-06-12 15:47:10 -0700	[diff] [blame]	946	config REGULATOR_QCOM_SPMI
				947	tristate "Qualcomm SPMI regulator driver"
				948	depends on SPMI \|\| COMPILE_TEST
				949	help
				950	If you say yes to this option, support will be included for the
				951	regulators found in Qualcomm SPMI PMICs.
				952
				953	Say M here if you want to include support for the regulators on the
				954	Qualcomm SPMI PMICs as a module. The module will be named
				955	"qcom_spmi-regulator".
				956
Wesley Cheng	4fe66d5	2020-06-26 11:55:14 -0700	[diff] [blame]	957	config REGULATOR_QCOM_USB_VBUS
				958	tristate "Qualcomm USB Vbus regulator driver"
				959	depends on SPMI \|\| COMPILE_TEST
				960	help
				961	If you say yes to this option, support will be included for the
				962	regulator used to enable the VBUS output.
				963
				964	Say M here if you want to include support for enabling the VBUS output
				965	as a module. The module will be named "qcom_usb_vbus_regulator".
				966
Marek Vasut	3857347	2020-08-09 12:59:38 +0200	[diff] [blame]	967	config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
				968	tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
				969	depends on BACKLIGHT_CLASS_DEVICE
				970	depends on I2C
				971	select REGMAP_I2C
				972	help
				973	This driver supports ATTINY regulator on the Raspberry Pi 7-inch
				974	touchscreen unit. The regulator is used to enable power to the
				975	TC358762, display and to control backlight.
				976
Laxman Dewangan	6ffc327	2012-04-04 12:44:00 +0530	[diff] [blame]	977	config REGULATOR_RC5T583
				978	tristate "RICOH RC5T583 Power regulators"
				979	depends on MFD_RC5T583
				980	help
				981	Select this option to enable the power regulator of RICOH
				982	PMIC RC5T583.
				983	This driver supports the control of different power rails of device
				984	through regulator interface. The device supports multiple DCDC/LDO
				985	outputs which can be controlled by i2c communication.
				986
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	987	config REGULATOR_RK808
Heiko Stuebner	e444f6d	2019-06-26 14:29:18 +0200	[diff] [blame]	988	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	989	depends on MFD_RK808
				990	help
				991	Select this option to enable the power regulator of ROCKCHIP
Heiko Stuebner	e444f6d	2019-06-26 14:29:18 +0200	[diff] [blame]	992	PMIC RK805,RK809&RK817,RK808 and RK818.
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	993	This driver supports the control of different power rails of device
				994	through regulator interface. The device supports multiple DCDC/LDO
				995	outputs which can be controlled by i2c communication.
				996
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	997	config REGULATOR_RN5T618
Stefan Agner	ed6d362	2016-06-28 22:53:20 -0700	[diff] [blame]	998	tristate "Ricoh RN5T567/618 voltage regulators"
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	999	depends on MFD_RN5T618
				1000	help
Pierre-Hugues Husson	83b2a3c	2017-08-27 15:58:31 +0200	[diff] [blame]	1001	Say y here to support the regulators found on Ricoh RN5T567,
				1002	RN5T618 or RC5T619 PMIC.
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	1003
Matti Vaittinen	21b7215	2020-01-20 15:44:45 +0200	[diff] [blame]	1004	config REGULATOR_ROHM
				1005	tristate
				1006
ChiYuan Huang	5bbbfc7f	2020-08-15 11:14:20 +0800	[diff] [blame]	1007	config REGULATOR_RT4801
				1008	tristate "Richtek RT4801 Regulators"
				1009	depends on I2C
Axel Lin	02532cb	2020-08-19 16:59:59 +0800	[diff] [blame]	1010	select REGMAP_I2C
ChiYuan Huang	5bbbfc7f	2020-08-15 11:14:20 +0800	[diff] [blame]	1011	help
				1012	This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
				1013	The device supports two regulators (DSVP/DSVN).
				1014
ChiYuan Huang	9351ab8	2020-12-17 23:00:44 +0800	[diff] [blame]	1015	config REGULATOR_RT4831
				1016	tristate "Richtek RT4831 DSV Regulators"
				1017	depends on MFD_RT4831
				1018	help
				1019	This adds support for voltage regulators in Richtek RT4831.
				1020	There are three regulators (VLCM/DSVP/DSVN).
				1021	VLCM is a virtual voltage input for DSVP/DSVN inside IC.
				1022	And DSVP/DSVN is the real Vout range from 4V to 6.5V.
				1023	It's common used to provide the power for the display panel.
				1024
Beomho Seo	b191757	2014-11-12 21:07:59 +0900	[diff] [blame]	1025	config REGULATOR_RT5033
				1026	tristate "Richtek RT5033 Regulators"
				1027	depends on MFD_RT5033
				1028	help
				1029	This adds support for voltage and current regulators in Richtek
				1030	RT5033 PMIC. The device supports multiple regulators like
				1031	current source, LDO and Buck.
				1032
ChiYuan Huang	b8c054a	2020-09-28 15:19:43 +0800	[diff] [blame]	1033	config REGULATOR_RTMV20
				1034	tristate "RTMV20 Laser Diode Regulator"
				1035	depends on I2C
				1036	select REGMAP_I2C
				1037	help
				1038	This driver adds support for the load switch current regulator on
				1039	the Richtek RTMV20. It can support the load current up to 6A and
				1040	integrate strobe/vsync/fsin signal to synchronize the IR camera.
				1041
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	1042	config REGULATOR_S2MPA01
				1043	tristate "Samsung S2MPA01 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1044	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1045	help
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	1046	This driver controls Samsung S2MPA01 voltage output regulator
				1047	via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
				1048
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1049	config REGULATOR_S2MPS11
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	1050	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1051	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1052	help
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	1053	This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
Chanwoo Choi	76b9840	2014-11-18 17:59:40 +0900	[diff] [blame]	1054	output regulator via I2C bus. The chip is comprised of high efficient
				1055	Buck converters including Dual-Phase Buck converter, Buck-Boost
				1056	converter, various LDOs.
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1057
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1058	config REGULATOR_S5M8767
				1059	tristate "Samsung S5M8767A voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1060	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	1061	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1062	This driver supports a Samsung S5M8767A voltage output regulator
				1063	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
				1064	supports DVS mode with 8bits of output voltage control.
Yong Shen	5e428d5	2010-12-14 14:00:55 +0800	[diff] [blame]	1065
Erick Chen	433c9bb	2017-12-05 14:35:46 +0800	[diff] [blame]	1066	config REGULATOR_SC2731
				1067	tristate "Spreadtrum SC2731 power regulator driver"
				1068	depends on MFD_SC27XX_PMIC \|\| COMPILE_TEST
				1069	help
				1070	This driver provides support for the voltage regulators on the
				1071	SC2731 PMIC.
				1072
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	1073	config REGULATOR_SKY81452
				1074	tristate "Skyworks Solutions SKY81452 voltage regulator"
Gyungoh Yoo	70b5b27	2014-11-17 17:33:10 +0900	[diff] [blame]	1075	depends on MFD_SKY81452
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	1076	help
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	1077	This driver supports Skyworks SKY81452 voltage output regulator
				1078	via I2C bus. SKY81452 has one voltage linear regulator can be
				1079	programmed from 4.5V to 20V.
				1080
				1081	This driver can also be built as a module. If so, the module
				1082	will be called sky81452-regulator.
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	1083
Eric Jeong	a867bde	2019-04-18 15:09:44 +0900	[diff] [blame]	1084	config REGULATOR_SLG51000
Krzysztof Kozlowski	76bec25	2019-11-20 21:39:49 +0800	[diff] [blame]	1085	tristate "Dialog Semiconductor SLG51000 regulators"
				1086	depends on I2C
				1087	select REGMAP_I2C
				1088	help
Eric Jeong	a867bde	2019-04-18 15:09:44 +0900	[diff] [blame]	1089	Say y here to support for the Dialog Semiconductor SLG51000.
				1090	The SLG51000 is seven compact and customizable low dropout
				1091	regulators.
				1092
Fabrice Gasnier	4e210fb	2019-07-01 10:14:23 +0200	[diff] [blame]	1093	config REGULATOR_STM32_BOOSTER
				1094	tristate "STMicroelectronics STM32 BOOSTER"
				1095	depends on ARCH_STM32 \|\| COMPILE_TEST
				1096	help
				1097	This driver supports internal booster (3V3) embedded in some
				1098	STMicroelectronics STM32 chips. It can be used to supply ADC analog
				1099	input switches when vdda supply is below 2.7V.
				1100
				1101	This driver can also be built as a module. If so, the module
				1102	will be called stm32-booster.
				1103
Fabrice Gasnier	0cdbf48	2017-08-30 17:55:28 +0200	[diff] [blame]	1104	config REGULATOR_STM32_VREFBUF
				1105	tristate "STMicroelectronics STM32 VREFBUF"
				1106	depends on ARCH_STM32 \|\| COMPILE_TEST
				1107	help
				1108	This driver supports STMicroelectronics STM32 VREFBUF (voltage
				1109	reference buffer) which can be used as voltage reference for
				1110	internal ADCs, DACs and also for external components through
				1111	dedicated Vref+ pin.
				1112
				1113	This driver can also be built as a module. If so, the module
				1114	will be called stm32-vrefbuf.
				1115
Pascal PAILLET-LME	6cdae81	2019-04-15 09:17:38 +0000	[diff] [blame]	1116	config REGULATOR_STM32_PWR
				1117	bool "STMicroelectronics STM32 PWR"
				1118	depends on ARCH_STM32 \|\| COMPILE_TEST
				1119	help
				1120	This driver supports internal regulators (1V1, 1V8, 3V3) in the
				1121	STMicroelectronics STM32 chips.
				1122
pascal paillet	ca55b71	2018-10-08 16:29:40 +0000	[diff] [blame]	1123	config REGULATOR_STPMIC1
				1124	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
				1125	depends on MFD_STPMIC1
				1126	help
				1127	This driver supports STMicroelectronics STPMIC1 PMIC voltage
				1128	regulators and switches. The STPMIC1 regulators supply power to
				1129	an application processor as well as to external system
				1130	peripherals such as DDR, Flash memories and system devices.
				1131
				1132	To compile this driver as a module, choose M here: the
				1133	module will be called stpmic1_regulator.
				1134
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1135	config REGULATOR_TI_ABB
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	1136	tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1137	depends on ARCH_OMAP
Linus Walleij	d619bc1	2009-09-09 11:31:00 +0200	[diff] [blame]	1138	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1139	Select this option to support Texas Instruments' on-chip Adaptive Body
				1140	Bias (ABB) LDO regulators. It is recommended that this option be
				1141	enabled on required TI SoC. Certain Operating Performance Points
				1142	on TI SoCs may be unstable without enabling this as it provides
				1143	device specific optimized bias to allow/optimize functionality.
Graeme Gregory	4c5dabc	2012-05-15 15:48:59 +0900	[diff] [blame]	1144
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	1145	config REGULATOR_STW481X_VMMC
				1146	bool "ST Microelectronics STW481X VMMC regulator"
Luis de Bethencourt	4049dc1	2015-10-12 17:27:08 +0100	[diff] [blame]	1147	depends on MFD_STW481X \|\| COMPILE_TEST
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	1148	default y if MFD_STW481X
				1149	help
				1150	This driver supports the internal VMMC regulator in the STw481x
				1151	PMIC chips.
				1152
Ondrej Jirman	8878302	2018-05-07 20:29:41 +0800	[diff] [blame]	1153	config REGULATOR_SY8106A
				1154	tristate "Silergy SY8106A regulator"
				1155	depends on I2C && (OF \|\| COMPILE_TEST)
				1156	select REGMAP_I2C
				1157	help
				1158	This driver supports SY8106A single output regulator.
				1159
Jisheng Zhang	d5a2b82	2019-08-27 08:45:33 +0000	[diff] [blame]	1160	config REGULATOR_SY8824X
Jisheng Zhang	67a7b05	2019-08-27 08:47:30 +0000	[diff] [blame]	1161	tristate "Silergy SY8824C/SY8824E regulator"
Jisheng Zhang	d5a2b82	2019-08-27 08:45:33 +0000	[diff] [blame]	1162	depends on I2C && (OF \|\| COMPILE_TEST)
				1163	select REGMAP_I2C
				1164	help
				1165	This driver supports SY8824C single output regulator.
				1166
Jisheng Zhang	38fc6f2	2020-07-02 17:14:38 +0800	[diff] [blame]	1167	config REGULATOR_SY8827N
				1168	tristate "Silergy SY8827N regulator"
				1169	depends on I2C && (OF \|\| COMPILE_TEST)
				1170	select REGMAP_I2C
				1171	help
				1172	This driver supports SY8827N single output regulator.
				1173
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	1174	config REGULATOR_TPS51632
				1175	tristate "TI TPS51632 Power Regulator"
				1176	depends on I2C
				1177	select REGMAP_I2C
				1178	help
				1179	This driver supports TPS51632 voltage regulator chip.
Axel Lin	7bde767	2012-11-01 14:02:36 +0800	[diff] [blame]	1180	The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	1181	with Serial VID control and DVFS.
				1182	The voltage output can be configure through I2C interface or PWM
				1183	interface.
				1184
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	1185	config REGULATOR_TPS6105X
				1186	tristate "TI TPS6105X Power regulators"
				1187	depends on TPS6105X
				1188	default y if TPS6105X
				1189	help
				1190	This driver supports TPS61050/TPS61052 voltage regulator chips.
				1191	It is a single boost converter primarily for white LEDs and
				1192	audio amplifiers.
				1193
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1194	config REGULATOR_TPS62360
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	1195	tristate "TI TPS6236x Power Regulator"
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1196	depends on I2C
				1197	select REGMAP_I2C
				1198	help
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	1199	This driver supports TPS6236x voltage regulator chip. This
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1200	regulator is meant for processor core supply. This chip is
				1201	high-frequency synchronous step down dc-dc converter optimized
				1202	for battery-powered portable applications.
				1203
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	1204	config REGULATOR_TPS65023
				1205	tristate "TI TPS65023 Power regulators"
				1206	depends on I2C
Mark Brown	9092335	2011-06-18 01:18:51 +0100	[diff] [blame]	1207	select REGMAP_I2C
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	1208	help
				1209	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
				1210	three step-down converters and two general-purpose LDO voltage regulators.
				1211	It supports TI's software based Class-2 SmartReflex implementation.
				1212
				1213	config REGULATOR_TPS6507X
				1214	tristate "TI TPS6507X Power regulators"
				1215	depends on I2C
				1216	help
				1217	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
				1218	three step-down converters and two general-purpose LDO voltage regulators.
				1219	It supports TI's software based Class-2 SmartReflex implementation.
				1220
Andrew F. Davis	d2a2e72	2015-11-04 11:12:14 -0600	[diff] [blame]	1221	config REGULATOR_TPS65086
				1222	tristate "TI TPS65086 Power regulators"
				1223	depends on MFD_TPS65086
				1224	help
				1225	This driver provides support for the voltage regulators on
				1226	TI TPS65086 PMICs.
				1227
Venu Byravarasu	452534e	2012-03-22 18:34:09 +0530	[diff] [blame]	1228	config REGULATOR_TPS65090
				1229	tristate "TI TPS65090 Power regulator"
				1230	depends on MFD_TPS65090
				1231	help
				1232	This driver provides support for the voltage regulators on the
				1233	TI TPS65090 PMIC.
				1234
Venkat Reddy Talla	77c129b	2017-04-12 15:44:36 +0530	[diff] [blame]	1235	config REGULATOR_TPS65132
				1236	tristate "TI TPS65132 Dual Output Power regulators"
				1237	depends on I2C && GPIOLIB
				1238	select REGMAP_I2C
				1239	help
				1240	This driver supports TPS65132 single inductor - dual output
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	1241	power supply specifically designed for display panels.
Venkat Reddy Talla	77c129b	2017-04-12 15:44:36 +0530	[diff] [blame]	1242
AnilKumar Ch	a493077f	2012-01-11 16:11:49 +0530	[diff] [blame]	1243	config REGULATOR_TPS65217
				1244	tristate "TI TPS65217 Power regulators"
				1245	depends on MFD_TPS65217
				1246	help
				1247	This driver supports TPS65217 voltage regulator chips. TPS65217
				1248	provides three step-down converters and four general-purpose LDO
				1249	voltage regulators. It supports software based voltage control
				1250	for different voltage domains
				1251
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	1252	config REGULATOR_TPS65218
				1253	tristate "TI TPS65218 Power regulators"
Axel Lin	948838a	2014-02-19 16:35:03 +0800	[diff] [blame]	1254	depends on MFD_TPS65218 && OF
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	1255	help
				1256	This driver supports TPS65218 voltage regulator chips. TPS65218
				1257	provides six step-down converters and one general-purpose LDO
				1258	voltage regulators. It supports software based voltage control
				1259	for different voltage domains
				1260
Cyril Chemparathy	1394fd2	2010-12-07 12:04:11 -0500	[diff] [blame]	1261	config REGULATOR_TPS6524X
				1262	tristate "TI TPS6524X Power regulators"
				1263	depends on SPI
				1264	help
				1265	This driver supports TPS6524X voltage regulator chips. TPS6524X
				1266	provides three step-down converters and two general-purpose LDO
				1267	voltage regulators. This device is interfaced using a customized
				1268	serial interface currently supported on the sequencer serial
				1269	port controller.
				1270
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1271	config REGULATOR_TPS6586X
				1272	tristate "TI TPS6586X Power regulators"
				1273	depends on MFD_TPS6586X
				1274	help
				1275	This driver supports TPS6586X voltage regulator chips.
				1276
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1277	config REGULATOR_TPS65910
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	1278	tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1279	depends on MFD_TPS65910
				1280	help
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	1281	This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1282
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1283	config REGULATOR_TPS65912
				1284	tristate "TI TPS65912 Power regulator"
Andrew F. Davis	33f9d8c	2016-01-25 09:43:46 -0600	[diff] [blame]	1285	depends on MFD_TPS65912
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	1286	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1287	This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	1288
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	1289	config REGULATOR_TPS80031
Sebastiaan Schalbroeck	3b06349	2016-08-22 18:23:14 +0200	[diff] [blame]	1290	tristate "TI TPS80031/TPS80032 power regulator driver"
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	1291	depends on MFD_TPS80031
				1292	help
				1293	TPS80031/ TPS80032 Fully Integrated Power Management with Power
				1294	Path and Battery Charger. It has 5 configurable step-down
				1295	converters, 11 general purpose LDOs, VBUS generator and digital
				1296	output to control regulators.
				1297
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1298	config REGULATOR_TWL4030
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	1299	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1300	depends on TWL4030_CORE
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1301	help
				1302	This driver supports the voltage regulators provided by
				1303	this family of companion chips.
				1304
Kunihiko Hayashi	9df4f90	2018-07-11 13:30:52 +0900	[diff] [blame]	1305	config REGULATOR_UNIPHIER
				1306	tristate "UniPhier regulator driver"
				1307	depends on ARCH_UNIPHIER \|\| COMPILE_TEST
Axel Lin	a71bcdf	2019-03-25 18:59:19 +0800	[diff] [blame]	1308	depends on OF
				1309	select REGMAP_MMIO
Kunihiko Hayashi	9df4f90	2018-07-11 13:30:52 +0900	[diff] [blame]	1310	default ARCH_UNIPHIER
				1311	help
				1312	Support for regulators implemented on Socionext UniPhier SoCs.
				1313
Matthias Kaehlcke	9dee7a7	2017-04-07 12:51:58 -0700	[diff] [blame]	1314	config REGULATOR_VCTRL
				1315	tristate "Voltage controlled regulators"
				1316	depends on OF
				1317	help
				1318	This driver provides support for voltage regulators whose output
				1319	voltage is controlled by the voltage of another regulator.
				1320
Pawel Moll	31e5408	2012-09-24 18:56:54 +0100	[diff] [blame]	1321	config REGULATOR_VEXPRESS
				1322	tristate "Versatile Express regulators"
				1323	depends on VEXPRESS_CONFIG
				1324	help
				1325	This driver provides support for voltage regulators available
				1326	on the ARM Ltd's Versatile Express platform.
				1327
Robert Marko	ebf652b	2020-01-12 12:30:01 +0100	[diff] [blame]	1328	config REGULATOR_VQMMC_IPQ4019
				1329	tristate "IPQ4019 VQMMC SD LDO regulator support"
				1330	depends on ARCH_QCOM
				1331	help
				1332	This driver provides support for the VQMMC LDO I/0
				1333	voltage regulator of the IPQ4019 SD/EMMC controller.
				1334
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	1335	config REGULATOR_WM831X
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1336	tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	1337	depends on MFD_WM831X
				1338	help
				1339	Support the voltage and current regulators of the WM831x series
				1340	of PMIC devices.
				1341
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1342	config REGULATOR_WM8350
				1343	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
				1344	depends on MFD_WM8350
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1345	help
				1346	This driver provides support for the voltage and current regulators
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	1347	of the WM8350 AudioPlus PMIC.
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1348
				1349	config REGULATOR_WM8400
				1350	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
				1351	depends on MFD_WM8400
				1352	help
				1353	This driver provides support for the voltage regulators of the
				1354	WM8400 AudioPlus PMIC.
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1355
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	1356	config REGULATOR_WM8994
				1357	tristate "Wolfson Microelectronics WM8994 CODEC"
				1358	depends on MFD_WM8994
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	1359	help
				1360	This driver provides support for the voltage regulators on the
				1361	WM8994 CODEC.
				1362
Nisha Kumari	498ab2f	2020-06-22 18:11:10 +0530	[diff] [blame]	1363	config REGULATOR_QCOM_LABIBB
				1364	tristate "QCOM LAB/IBB regulator support"
				1365	depends on SPMI \|\| COMPILE_TEST
				1366	help
				1367	This driver supports Qualcomm's LAB/IBB regulators present on the
				1368	Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
				1369	based PMIC implementations. LAB can be used as positive
				1370	boost regulator and IBB can be used as a negative boost regulator
				1371	for LCD display panel.
				1372
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	1373	endif
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	1374