Michael Schmitz | 3109e5a | 2018-04-12 13:53:26 +1200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * ESP front-end for Amiga ZORRO SCSI systems. |
| 4 | * |
| 5 | * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) |
| 6 | * |
| 7 | * Copyright (C) 2011,2018 Michael Schmitz (schmitz@debian.org) for |
| 8 | * migration to ESP SCSI core |
| 9 | * |
| 10 | * Copyright (C) 2013 Tuomas Vainikka (tuomas.vainikka@aalto.fi) for |
| 11 | * Blizzard 1230 DMA and probe function fixes |
| 12 | * |
| 13 | * Copyright (C) 2017 Finn Thain for PIO code from Mac ESP driver adapted here |
| 14 | */ |
| 15 | /* |
| 16 | * ZORRO bus code from: |
| 17 | */ |
| 18 | /* |
| 19 | * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux. |
| 20 | * Amiga MacroSystemUS WarpEngine SCSI controller. |
| 21 | * Amiga Technologies/DKB A4091 SCSI controller. |
| 22 | * |
| 23 | * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk> |
| 24 | * plus modifications of the 53c7xx.c driver to support the Amiga. |
| 25 | * |
| 26 | * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org> |
| 27 | */ |
| 28 | |
| 29 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 30 | |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/init.h> |
| 33 | #include <linux/interrupt.h> |
| 34 | #include <linux/dma-mapping.h> |
| 35 | #include <linux/scatterlist.h> |
| 36 | #include <linux/delay.h> |
| 37 | #include <linux/zorro.h> |
| 38 | #include <linux/slab.h> |
| 39 | |
| 40 | #include <asm/page.h> |
| 41 | #include <asm/pgtable.h> |
| 42 | #include <asm/cacheflush.h> |
| 43 | #include <asm/amigahw.h> |
| 44 | #include <asm/amigaints.h> |
| 45 | |
| 46 | #include <scsi/scsi_host.h> |
| 47 | #include <scsi/scsi_transport_spi.h> |
| 48 | #include <scsi/scsi_device.h> |
| 49 | #include <scsi/scsi_tcq.h> |
| 50 | |
| 51 | #include "esp_scsi.h" |
| 52 | |
| 53 | MODULE_AUTHOR("Michael Schmitz <schmitz@debian.org>"); |
| 54 | MODULE_DESCRIPTION("Amiga Zorro NCR5C9x (ESP) driver"); |
| 55 | MODULE_LICENSE("GPL"); |
| 56 | |
| 57 | /* per-board register layout definitions */ |
| 58 | |
| 59 | /* Blizzard 1230 DMA interface */ |
| 60 | |
| 61 | struct blz1230_dma_registers { |
| 62 | unsigned char dma_addr; /* DMA address [0x0000] */ |
| 63 | unsigned char dmapad2[0x7fff]; |
| 64 | unsigned char dma_latch; /* DMA latch [0x8000] */ |
| 65 | }; |
| 66 | |
| 67 | /* Blizzard 1230II DMA interface */ |
| 68 | |
| 69 | struct blz1230II_dma_registers { |
| 70 | unsigned char dma_addr; /* DMA address [0x0000] */ |
| 71 | unsigned char dmapad2[0xf]; |
| 72 | unsigned char dma_latch; /* DMA latch [0x0010] */ |
| 73 | }; |
| 74 | |
| 75 | /* Blizzard 2060 DMA interface */ |
| 76 | |
| 77 | struct blz2060_dma_registers { |
| 78 | unsigned char dma_led_ctrl; /* DMA led control [0x000] */ |
| 79 | unsigned char dmapad1[0x0f]; |
| 80 | unsigned char dma_addr0; /* DMA address (MSB) [0x010] */ |
| 81 | unsigned char dmapad2[0x03]; |
| 82 | unsigned char dma_addr1; /* DMA address [0x014] */ |
| 83 | unsigned char dmapad3[0x03]; |
| 84 | unsigned char dma_addr2; /* DMA address [0x018] */ |
| 85 | unsigned char dmapad4[0x03]; |
| 86 | unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */ |
| 87 | }; |
| 88 | |
| 89 | /* DMA control bits */ |
| 90 | #define DMA_WRITE 0x80000000 |
| 91 | |
| 92 | /* Cyberstorm DMA interface */ |
| 93 | |
| 94 | struct cyber_dma_registers { |
| 95 | unsigned char dma_addr0; /* DMA address (MSB) [0x000] */ |
| 96 | unsigned char dmapad1[1]; |
| 97 | unsigned char dma_addr1; /* DMA address [0x002] */ |
| 98 | unsigned char dmapad2[1]; |
| 99 | unsigned char dma_addr2; /* DMA address [0x004] */ |
| 100 | unsigned char dmapad3[1]; |
| 101 | unsigned char dma_addr3; /* DMA address (LSB) [0x006] */ |
| 102 | unsigned char dmapad4[0x3fb]; |
| 103 | unsigned char cond_reg; /* DMA cond (ro) [0x402] */ |
| 104 | #define ctrl_reg cond_reg /* DMA control (wo) [0x402] */ |
| 105 | }; |
| 106 | |
| 107 | /* DMA control bits */ |
| 108 | #define CYBER_DMA_WRITE 0x40 /* DMA direction. 1 = write */ |
| 109 | #define CYBER_DMA_Z3 0x20 /* 16 (Z2) or 32 (CHIP/Z3) bit DMA transfer */ |
| 110 | |
| 111 | /* DMA status bits */ |
| 112 | #define CYBER_DMA_HNDL_INTR 0x80 /* DMA IRQ pending? */ |
| 113 | |
| 114 | /* The CyberStorm II DMA interface */ |
| 115 | struct cyberII_dma_registers { |
| 116 | unsigned char cond_reg; /* DMA cond (ro) [0x000] */ |
| 117 | #define ctrl_reg cond_reg /* DMA control (wo) [0x000] */ |
| 118 | unsigned char dmapad4[0x3f]; |
| 119 | unsigned char dma_addr0; /* DMA address (MSB) [0x040] */ |
| 120 | unsigned char dmapad1[3]; |
| 121 | unsigned char dma_addr1; /* DMA address [0x044] */ |
| 122 | unsigned char dmapad2[3]; |
| 123 | unsigned char dma_addr2; /* DMA address [0x048] */ |
| 124 | unsigned char dmapad3[3]; |
| 125 | unsigned char dma_addr3; /* DMA address (LSB) [0x04c] */ |
| 126 | }; |
| 127 | |
| 128 | /* Fastlane DMA interface */ |
| 129 | |
| 130 | struct fastlane_dma_registers { |
| 131 | unsigned char cond_reg; /* DMA status (ro) [0x0000] */ |
| 132 | #define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */ |
| 133 | char dmapad1[0x3f]; |
| 134 | unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */ |
| 135 | }; |
| 136 | |
| 137 | /* |
| 138 | * The controller registers can be found in the Z2 config area at these |
| 139 | * offsets: |
| 140 | */ |
| 141 | #define FASTLANE_ESP_ADDR 0x1000001 |
| 142 | |
| 143 | /* DMA status bits */ |
| 144 | #define FASTLANE_DMA_MINT 0x80 |
| 145 | #define FASTLANE_DMA_IACT 0x40 |
| 146 | #define FASTLANE_DMA_CREQ 0x20 |
| 147 | |
| 148 | /* DMA control bits */ |
| 149 | #define FASTLANE_DMA_FCODE 0xa0 |
| 150 | #define FASTLANE_DMA_MASK 0xf3 |
| 151 | #define FASTLANE_DMA_WRITE 0x08 /* 1 = write */ |
| 152 | #define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */ |
| 153 | #define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */ |
| 154 | #define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */ |
| 155 | |
| 156 | /* |
| 157 | * private data used for driver |
| 158 | */ |
| 159 | struct zorro_esp_priv { |
| 160 | struct esp *esp; /* our ESP instance - for Scsi_host* */ |
| 161 | void __iomem *board_base; /* virtual address (Zorro III board) */ |
| 162 | int error; /* PIO error flag */ |
| 163 | int zorro3; /* board is Zorro III */ |
| 164 | unsigned char ctrl_data; /* shadow copy of ctrl_reg */ |
| 165 | }; |
| 166 | |
| 167 | /* |
| 168 | * On all implementations except for the Oktagon, padding between ESP |
| 169 | * registers is three bytes. |
| 170 | * On Oktagon, it is one byte - use a different accessor there. |
| 171 | * |
| 172 | * Oktagon needs PDMA - currently unsupported! |
| 173 | */ |
| 174 | |
| 175 | static void zorro_esp_write8(struct esp *esp, u8 val, unsigned long reg) |
| 176 | { |
| 177 | writeb(val, esp->regs + (reg * 4UL)); |
| 178 | } |
| 179 | |
| 180 | static u8 zorro_esp_read8(struct esp *esp, unsigned long reg) |
| 181 | { |
| 182 | return readb(esp->regs + (reg * 4UL)); |
| 183 | } |
| 184 | |
| 185 | static dma_addr_t zorro_esp_map_single(struct esp *esp, void *buf, |
| 186 | size_t sz, int dir) |
| 187 | { |
| 188 | return dma_map_single(esp->dev, buf, sz, dir); |
| 189 | } |
| 190 | |
| 191 | static int zorro_esp_map_sg(struct esp *esp, struct scatterlist *sg, |
| 192 | int num_sg, int dir) |
| 193 | { |
| 194 | return dma_map_sg(esp->dev, sg, num_sg, dir); |
| 195 | } |
| 196 | |
| 197 | static void zorro_esp_unmap_single(struct esp *esp, dma_addr_t addr, |
| 198 | size_t sz, int dir) |
| 199 | { |
| 200 | dma_unmap_single(esp->dev, addr, sz, dir); |
| 201 | } |
| 202 | |
| 203 | static void zorro_esp_unmap_sg(struct esp *esp, struct scatterlist *sg, |
| 204 | int num_sg, int dir) |
| 205 | { |
| 206 | dma_unmap_sg(esp->dev, sg, num_sg, dir); |
| 207 | } |
| 208 | |
| 209 | static int zorro_esp_irq_pending(struct esp *esp) |
| 210 | { |
| 211 | /* check ESP status register; DMA has no status reg. */ |
| 212 | if (zorro_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR) |
| 213 | return 1; |
| 214 | |
| 215 | return 0; |
| 216 | } |
| 217 | |
| 218 | static int cyber_esp_irq_pending(struct esp *esp) |
| 219 | { |
| 220 | struct cyber_dma_registers __iomem *dregs = esp->dma_regs; |
| 221 | unsigned char dma_status = readb(&dregs->cond_reg); |
| 222 | |
| 223 | /* It's important to check the DMA IRQ bit in the correct way! */ |
| 224 | return ((zorro_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR) && |
| 225 | (dma_status & CYBER_DMA_HNDL_INTR)); |
| 226 | } |
| 227 | |
| 228 | static int fastlane_esp_irq_pending(struct esp *esp) |
| 229 | { |
| 230 | struct fastlane_dma_registers __iomem *dregs = esp->dma_regs; |
| 231 | unsigned char dma_status; |
| 232 | |
| 233 | dma_status = readb(&dregs->cond_reg); |
| 234 | |
| 235 | if (dma_status & FASTLANE_DMA_IACT) |
| 236 | return 0; /* not our IRQ */ |
| 237 | |
| 238 | /* Return non-zero if ESP requested IRQ */ |
| 239 | return ( |
| 240 | (dma_status & FASTLANE_DMA_CREQ) && |
| 241 | (!(dma_status & FASTLANE_DMA_MINT)) && |
| 242 | (zorro_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR)); |
| 243 | } |
| 244 | |
| 245 | static u32 zorro_esp_dma_length_limit(struct esp *esp, u32 dma_addr, |
| 246 | u32 dma_len) |
| 247 | { |
| 248 | return dma_len > 0xFFFFFF ? 0xFFFFFF : dma_len; |
| 249 | } |
| 250 | |
| 251 | static void zorro_esp_reset_dma(struct esp *esp) |
| 252 | { |
| 253 | /* nothing to do here */ |
| 254 | } |
| 255 | |
| 256 | static void zorro_esp_dma_drain(struct esp *esp) |
| 257 | { |
| 258 | /* nothing to do here */ |
| 259 | } |
| 260 | |
| 261 | static void zorro_esp_dma_invalidate(struct esp *esp) |
| 262 | { |
| 263 | /* nothing to do here */ |
| 264 | } |
| 265 | |
| 266 | static void fastlane_esp_dma_invalidate(struct esp *esp) |
| 267 | { |
| 268 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 269 | struct fastlane_dma_registers __iomem *dregs = esp->dma_regs; |
| 270 | unsigned char *ctrl_data = &zep->ctrl_data; |
| 271 | |
| 272 | *ctrl_data = (*ctrl_data & FASTLANE_DMA_MASK); |
| 273 | writeb(0, &dregs->clear_strobe); |
| 274 | z_writel(0, zep->board_base); |
| 275 | } |
| 276 | |
| 277 | /* |
| 278 | * Programmed IO routines follow. |
| 279 | */ |
| 280 | |
| 281 | static inline unsigned int zorro_esp_wait_for_fifo(struct esp *esp) |
| 282 | { |
| 283 | int i = 500000; |
| 284 | |
| 285 | do { |
| 286 | unsigned int fbytes = zorro_esp_read8(esp, ESP_FFLAGS) |
| 287 | & ESP_FF_FBYTES; |
| 288 | |
| 289 | if (fbytes) |
| 290 | return fbytes; |
| 291 | |
| 292 | udelay(2); |
| 293 | } while (--i); |
| 294 | |
| 295 | pr_err("FIFO is empty (sreg %02x)\n", |
| 296 | zorro_esp_read8(esp, ESP_STATUS)); |
| 297 | return 0; |
| 298 | } |
| 299 | |
| 300 | static inline int zorro_esp_wait_for_intr(struct esp *esp) |
| 301 | { |
| 302 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 303 | int i = 500000; |
| 304 | |
| 305 | do { |
| 306 | esp->sreg = zorro_esp_read8(esp, ESP_STATUS); |
| 307 | if (esp->sreg & ESP_STAT_INTR) |
| 308 | return 0; |
| 309 | |
| 310 | udelay(2); |
| 311 | } while (--i); |
| 312 | |
| 313 | pr_err("IRQ timeout (sreg %02x)\n", esp->sreg); |
| 314 | zep->error = 1; |
| 315 | return 1; |
| 316 | } |
| 317 | |
| 318 | /* |
| 319 | * PIO macros as used in mac_esp.c. |
| 320 | * Note that addr and fifo arguments are local-scope variables declared |
| 321 | * in zorro_esp_send_pio_cmd(), the macros are only used in that function, |
| 322 | * and addr and fifo are referenced in each use of the macros so there |
| 323 | * is no need to pass them as macro parameters. |
| 324 | */ |
| 325 | #define ZORRO_ESP_PIO_LOOP(operands, reg1) \ |
| 326 | asm volatile ( \ |
| 327 | "1: moveb " operands "\n" \ |
| 328 | " subqw #1,%1 \n" \ |
| 329 | " jbne 1b \n" \ |
| 330 | : "+a" (addr), "+r" (reg1) \ |
| 331 | : "a" (fifo)); |
| 332 | |
| 333 | #define ZORRO_ESP_PIO_FILL(operands, reg1) \ |
| 334 | asm volatile ( \ |
| 335 | " moveb " operands "\n" \ |
| 336 | " moveb " operands "\n" \ |
| 337 | " moveb " operands "\n" \ |
| 338 | " moveb " operands "\n" \ |
| 339 | " moveb " operands "\n" \ |
| 340 | " moveb " operands "\n" \ |
| 341 | " moveb " operands "\n" \ |
| 342 | " moveb " operands "\n" \ |
| 343 | " moveb " operands "\n" \ |
| 344 | " moveb " operands "\n" \ |
| 345 | " moveb " operands "\n" \ |
| 346 | " moveb " operands "\n" \ |
| 347 | " moveb " operands "\n" \ |
| 348 | " moveb " operands "\n" \ |
| 349 | " moveb " operands "\n" \ |
| 350 | " moveb " operands "\n" \ |
| 351 | " subqw #8,%1 \n" \ |
| 352 | " subqw #8,%1 \n" \ |
| 353 | : "+a" (addr), "+r" (reg1) \ |
| 354 | : "a" (fifo)); |
| 355 | |
| 356 | #define ZORRO_ESP_FIFO_SIZE 16 |
| 357 | |
| 358 | static void zorro_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count, |
| 359 | u32 dma_count, int write, u8 cmd) |
| 360 | { |
| 361 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 362 | u8 __iomem *fifo = esp->regs + ESP_FDATA * 16; |
| 363 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 364 | |
| 365 | cmd &= ~ESP_CMD_DMA; |
| 366 | |
| 367 | if (write) { |
| 368 | u8 *dst = (u8 *)addr; |
| 369 | u8 mask = ~(phase == ESP_MIP ? ESP_INTR_FDONE : ESP_INTR_BSERV); |
| 370 | |
| 371 | scsi_esp_cmd(esp, cmd); |
| 372 | |
| 373 | while (1) { |
| 374 | if (!zorro_esp_wait_for_fifo(esp)) |
| 375 | break; |
| 376 | |
| 377 | *dst++ = zorro_esp_read8(esp, ESP_FDATA); |
| 378 | --esp_count; |
| 379 | |
| 380 | if (!esp_count) |
| 381 | break; |
| 382 | |
| 383 | if (zorro_esp_wait_for_intr(esp)) |
| 384 | break; |
| 385 | |
| 386 | if ((esp->sreg & ESP_STAT_PMASK) != phase) |
| 387 | break; |
| 388 | |
| 389 | esp->ireg = zorro_esp_read8(esp, ESP_INTRPT); |
| 390 | if (esp->ireg & mask) { |
| 391 | zep->error = 1; |
| 392 | break; |
| 393 | } |
| 394 | |
| 395 | if (phase == ESP_MIP) |
| 396 | scsi_esp_cmd(esp, ESP_CMD_MOK); |
| 397 | |
| 398 | scsi_esp_cmd(esp, ESP_CMD_TI); |
| 399 | } |
| 400 | } else { /* unused, as long as we only handle MIP here */ |
| 401 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 402 | |
| 403 | if (esp_count >= ZORRO_ESP_FIFO_SIZE) |
| 404 | ZORRO_ESP_PIO_FILL("%0@+,%2@", esp_count) |
| 405 | else |
| 406 | ZORRO_ESP_PIO_LOOP("%0@+,%2@", esp_count) |
| 407 | |
| 408 | scsi_esp_cmd(esp, cmd); |
| 409 | |
| 410 | while (esp_count) { |
| 411 | unsigned int n; |
| 412 | |
| 413 | if (zorro_esp_wait_for_intr(esp)) |
| 414 | break; |
| 415 | |
| 416 | if ((esp->sreg & ESP_STAT_PMASK) != phase) |
| 417 | break; |
| 418 | |
| 419 | esp->ireg = zorro_esp_read8(esp, ESP_INTRPT); |
| 420 | if (esp->ireg & ~ESP_INTR_BSERV) { |
| 421 | zep->error = 1; |
| 422 | break; |
| 423 | } |
| 424 | |
| 425 | n = ZORRO_ESP_FIFO_SIZE - |
| 426 | (zorro_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES); |
| 427 | if (n > esp_count) |
| 428 | n = esp_count; |
| 429 | |
| 430 | if (n == ZORRO_ESP_FIFO_SIZE) |
| 431 | ZORRO_ESP_PIO_FILL("%0@+,%2@", esp_count) |
| 432 | else { |
| 433 | esp_count -= n; |
| 434 | ZORRO_ESP_PIO_LOOP("%0@+,%2@", n) |
| 435 | } |
| 436 | |
| 437 | scsi_esp_cmd(esp, ESP_CMD_TI); |
| 438 | } |
| 439 | } |
| 440 | } |
| 441 | |
| 442 | /* Blizzard 1230/60 SCSI-IV DMA */ |
| 443 | |
| 444 | static void zorro_esp_send_blz1230_dma_cmd(struct esp *esp, u32 addr, |
| 445 | u32 esp_count, u32 dma_count, int write, u8 cmd) |
| 446 | { |
| 447 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 448 | struct blz1230_dma_registers __iomem *dregs = esp->dma_regs; |
| 449 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 450 | |
| 451 | zep->error = 0; |
| 452 | /* |
| 453 | * Use PIO if transferring message bytes to esp->command_block_dma. |
| 454 | * PIO requires a virtual address, so substitute esp->command_block |
| 455 | * for addr. |
| 456 | */ |
| 457 | if (phase == ESP_MIP && addr == esp->command_block_dma) { |
| 458 | zorro_esp_send_pio_cmd(esp, (u32) esp->command_block, |
| 459 | esp_count, dma_count, write, cmd); |
| 460 | return; |
| 461 | } |
| 462 | |
| 463 | if (write) |
| 464 | /* DMA receive */ |
| 465 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 466 | DMA_FROM_DEVICE); |
| 467 | else |
| 468 | /* DMA send */ |
| 469 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 470 | DMA_TO_DEVICE); |
| 471 | |
| 472 | addr >>= 1; |
| 473 | if (write) |
| 474 | addr &= ~(DMA_WRITE); |
| 475 | else |
| 476 | addr |= DMA_WRITE; |
| 477 | |
| 478 | writeb((addr >> 24) & 0xff, &dregs->dma_latch); |
| 479 | writeb((addr >> 24) & 0xff, &dregs->dma_addr); |
| 480 | writeb((addr >> 16) & 0xff, &dregs->dma_addr); |
| 481 | writeb((addr >> 8) & 0xff, &dregs->dma_addr); |
| 482 | writeb(addr & 0xff, &dregs->dma_addr); |
| 483 | |
| 484 | scsi_esp_cmd(esp, ESP_CMD_DMA); |
| 485 | zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 486 | zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
| 487 | zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
| 488 | |
| 489 | scsi_esp_cmd(esp, cmd); |
| 490 | } |
| 491 | |
| 492 | /* Blizzard 1230-II DMA */ |
| 493 | |
| 494 | static void zorro_esp_send_blz1230II_dma_cmd(struct esp *esp, u32 addr, |
| 495 | u32 esp_count, u32 dma_count, int write, u8 cmd) |
| 496 | { |
| 497 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 498 | struct blz1230II_dma_registers __iomem *dregs = esp->dma_regs; |
| 499 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 500 | |
| 501 | zep->error = 0; |
| 502 | /* Use PIO if transferring message bytes to esp->command_block_dma */ |
| 503 | if (phase == ESP_MIP && addr == esp->command_block_dma) { |
| 504 | zorro_esp_send_pio_cmd(esp, (u32) esp->command_block, |
| 505 | esp_count, dma_count, write, cmd); |
| 506 | return; |
| 507 | } |
| 508 | |
| 509 | if (write) |
| 510 | /* DMA receive */ |
| 511 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 512 | DMA_FROM_DEVICE); |
| 513 | else |
| 514 | /* DMA send */ |
| 515 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 516 | DMA_TO_DEVICE); |
| 517 | |
| 518 | addr >>= 1; |
| 519 | if (write) |
| 520 | addr &= ~(DMA_WRITE); |
| 521 | else |
| 522 | addr |= DMA_WRITE; |
| 523 | |
| 524 | writeb((addr >> 24) & 0xff, &dregs->dma_latch); |
| 525 | writeb((addr >> 16) & 0xff, &dregs->dma_addr); |
| 526 | writeb((addr >> 8) & 0xff, &dregs->dma_addr); |
| 527 | writeb(addr & 0xff, &dregs->dma_addr); |
| 528 | |
| 529 | scsi_esp_cmd(esp, ESP_CMD_DMA); |
| 530 | zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 531 | zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
| 532 | zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
| 533 | |
| 534 | scsi_esp_cmd(esp, cmd); |
| 535 | } |
| 536 | |
| 537 | /* Blizzard 2060 DMA */ |
| 538 | |
| 539 | static void zorro_esp_send_blz2060_dma_cmd(struct esp *esp, u32 addr, |
| 540 | u32 esp_count, u32 dma_count, int write, u8 cmd) |
| 541 | { |
| 542 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 543 | struct blz2060_dma_registers __iomem *dregs = esp->dma_regs; |
| 544 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 545 | |
| 546 | zep->error = 0; |
| 547 | /* Use PIO if transferring message bytes to esp->command_block_dma */ |
| 548 | if (phase == ESP_MIP && addr == esp->command_block_dma) { |
| 549 | zorro_esp_send_pio_cmd(esp, (u32) esp->command_block, |
| 550 | esp_count, dma_count, write, cmd); |
| 551 | return; |
| 552 | } |
| 553 | |
| 554 | if (write) |
| 555 | /* DMA receive */ |
| 556 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 557 | DMA_FROM_DEVICE); |
| 558 | else |
| 559 | /* DMA send */ |
| 560 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 561 | DMA_TO_DEVICE); |
| 562 | |
| 563 | addr >>= 1; |
| 564 | if (write) |
| 565 | addr &= ~(DMA_WRITE); |
| 566 | else |
| 567 | addr |= DMA_WRITE; |
| 568 | |
| 569 | writeb(addr & 0xff, &dregs->dma_addr3); |
| 570 | writeb((addr >> 8) & 0xff, &dregs->dma_addr2); |
| 571 | writeb((addr >> 16) & 0xff, &dregs->dma_addr1); |
| 572 | writeb((addr >> 24) & 0xff, &dregs->dma_addr0); |
| 573 | |
| 574 | scsi_esp_cmd(esp, ESP_CMD_DMA); |
| 575 | zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 576 | zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
| 577 | zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
| 578 | |
| 579 | scsi_esp_cmd(esp, cmd); |
| 580 | } |
| 581 | |
| 582 | /* Cyberstorm I DMA */ |
| 583 | |
| 584 | static void zorro_esp_send_cyber_dma_cmd(struct esp *esp, u32 addr, |
| 585 | u32 esp_count, u32 dma_count, int write, u8 cmd) |
| 586 | { |
| 587 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 588 | struct cyber_dma_registers __iomem *dregs = esp->dma_regs; |
| 589 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 590 | unsigned char *ctrl_data = &zep->ctrl_data; |
| 591 | |
| 592 | zep->error = 0; |
| 593 | /* Use PIO if transferring message bytes to esp->command_block_dma */ |
| 594 | if (phase == ESP_MIP && addr == esp->command_block_dma) { |
| 595 | zorro_esp_send_pio_cmd(esp, (u32) esp->command_block, |
| 596 | esp_count, dma_count, write, cmd); |
| 597 | return; |
| 598 | } |
| 599 | |
| 600 | zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 601 | zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
| 602 | zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
| 603 | |
| 604 | if (write) { |
| 605 | /* DMA receive */ |
| 606 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 607 | DMA_FROM_DEVICE); |
| 608 | addr &= ~(1); |
| 609 | } else { |
| 610 | /* DMA send */ |
| 611 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 612 | DMA_TO_DEVICE); |
| 613 | addr |= 1; |
| 614 | } |
| 615 | |
| 616 | writeb((addr >> 24) & 0xff, &dregs->dma_addr0); |
| 617 | writeb((addr >> 16) & 0xff, &dregs->dma_addr1); |
| 618 | writeb((addr >> 8) & 0xff, &dregs->dma_addr2); |
| 619 | writeb(addr & 0xff, &dregs->dma_addr3); |
| 620 | |
| 621 | if (write) |
| 622 | *ctrl_data &= ~(CYBER_DMA_WRITE); |
| 623 | else |
| 624 | *ctrl_data |= CYBER_DMA_WRITE; |
| 625 | |
| 626 | *ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ |
| 627 | |
| 628 | writeb(*ctrl_data, &dregs->ctrl_reg); |
| 629 | |
| 630 | scsi_esp_cmd(esp, cmd); |
| 631 | } |
| 632 | |
| 633 | /* Cyberstorm II DMA */ |
| 634 | |
| 635 | static void zorro_esp_send_cyberII_dma_cmd(struct esp *esp, u32 addr, |
| 636 | u32 esp_count, u32 dma_count, int write, u8 cmd) |
| 637 | { |
| 638 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 639 | struct cyberII_dma_registers __iomem *dregs = esp->dma_regs; |
| 640 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 641 | |
| 642 | zep->error = 0; |
| 643 | /* Use PIO if transferring message bytes to esp->command_block_dma */ |
| 644 | if (phase == ESP_MIP && addr == esp->command_block_dma) { |
| 645 | zorro_esp_send_pio_cmd(esp, (u32) esp->command_block, |
| 646 | esp_count, dma_count, write, cmd); |
| 647 | return; |
| 648 | } |
| 649 | |
| 650 | zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 651 | zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
| 652 | zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
| 653 | |
| 654 | if (write) { |
| 655 | /* DMA receive */ |
| 656 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 657 | DMA_FROM_DEVICE); |
| 658 | addr &= ~(1); |
| 659 | } else { |
| 660 | /* DMA send */ |
| 661 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 662 | DMA_TO_DEVICE); |
| 663 | addr |= 1; |
| 664 | } |
| 665 | |
| 666 | writeb((addr >> 24) & 0xff, &dregs->dma_addr0); |
| 667 | writeb((addr >> 16) & 0xff, &dregs->dma_addr1); |
| 668 | writeb((addr >> 8) & 0xff, &dregs->dma_addr2); |
| 669 | writeb(addr & 0xff, &dregs->dma_addr3); |
| 670 | |
| 671 | scsi_esp_cmd(esp, cmd); |
| 672 | } |
| 673 | |
| 674 | /* Fastlane DMA */ |
| 675 | |
| 676 | static void zorro_esp_send_fastlane_dma_cmd(struct esp *esp, u32 addr, |
| 677 | u32 esp_count, u32 dma_count, int write, u8 cmd) |
| 678 | { |
| 679 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 680 | struct fastlane_dma_registers __iomem *dregs = esp->dma_regs; |
| 681 | u8 phase = esp->sreg & ESP_STAT_PMASK; |
| 682 | unsigned char *ctrl_data = &zep->ctrl_data; |
| 683 | |
| 684 | zep->error = 0; |
| 685 | /* Use PIO if transferring message bytes to esp->command_block_dma */ |
| 686 | if (phase == ESP_MIP && addr == esp->command_block_dma) { |
| 687 | zorro_esp_send_pio_cmd(esp, (u32) esp->command_block, |
| 688 | esp_count, dma_count, write, cmd); |
| 689 | return; |
| 690 | } |
| 691 | |
| 692 | zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 693 | zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
| 694 | zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
| 695 | |
| 696 | if (write) { |
| 697 | /* DMA receive */ |
| 698 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 699 | DMA_FROM_DEVICE); |
| 700 | addr &= ~(1); |
| 701 | } else { |
| 702 | /* DMA send */ |
| 703 | dma_sync_single_for_device(esp->dev, addr, esp_count, |
| 704 | DMA_TO_DEVICE); |
| 705 | addr |= 1; |
| 706 | } |
| 707 | |
| 708 | writeb(0, &dregs->clear_strobe); |
| 709 | z_writel(addr, ((addr & 0x00ffffff) + zep->board_base)); |
| 710 | |
| 711 | if (write) { |
| 712 | *ctrl_data = (*ctrl_data & FASTLANE_DMA_MASK) | |
| 713 | FASTLANE_DMA_ENABLE; |
| 714 | } else { |
| 715 | *ctrl_data = ((*ctrl_data & FASTLANE_DMA_MASK) | |
| 716 | FASTLANE_DMA_ENABLE | |
| 717 | FASTLANE_DMA_WRITE); |
| 718 | } |
| 719 | |
| 720 | writeb(*ctrl_data, &dregs->ctrl_reg); |
| 721 | |
| 722 | scsi_esp_cmd(esp, cmd); |
| 723 | } |
| 724 | |
| 725 | static int zorro_esp_dma_error(struct esp *esp) |
| 726 | { |
| 727 | struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev); |
| 728 | |
| 729 | /* check for error in case we've been doing PIO */ |
| 730 | if (zep->error == 1) |
| 731 | return 1; |
| 732 | |
| 733 | /* do nothing - there seems to be no way to check for DMA errors */ |
| 734 | return 0; |
| 735 | } |
| 736 | |
| 737 | /* per-board ESP driver ops */ |
| 738 | |
| 739 | static const struct esp_driver_ops blz1230_esp_ops = { |
| 740 | .esp_write8 = zorro_esp_write8, |
| 741 | .esp_read8 = zorro_esp_read8, |
| 742 | .map_single = zorro_esp_map_single, |
| 743 | .map_sg = zorro_esp_map_sg, |
| 744 | .unmap_single = zorro_esp_unmap_single, |
| 745 | .unmap_sg = zorro_esp_unmap_sg, |
| 746 | .irq_pending = zorro_esp_irq_pending, |
| 747 | .dma_length_limit = zorro_esp_dma_length_limit, |
| 748 | .reset_dma = zorro_esp_reset_dma, |
| 749 | .dma_drain = zorro_esp_dma_drain, |
| 750 | .dma_invalidate = zorro_esp_dma_invalidate, |
| 751 | .send_dma_cmd = zorro_esp_send_blz1230_dma_cmd, |
| 752 | .dma_error = zorro_esp_dma_error, |
| 753 | }; |
| 754 | |
| 755 | static const struct esp_driver_ops blz1230II_esp_ops = { |
| 756 | .esp_write8 = zorro_esp_write8, |
| 757 | .esp_read8 = zorro_esp_read8, |
| 758 | .map_single = zorro_esp_map_single, |
| 759 | .map_sg = zorro_esp_map_sg, |
| 760 | .unmap_single = zorro_esp_unmap_single, |
| 761 | .unmap_sg = zorro_esp_unmap_sg, |
| 762 | .irq_pending = zorro_esp_irq_pending, |
| 763 | .dma_length_limit = zorro_esp_dma_length_limit, |
| 764 | .reset_dma = zorro_esp_reset_dma, |
| 765 | .dma_drain = zorro_esp_dma_drain, |
| 766 | .dma_invalidate = zorro_esp_dma_invalidate, |
| 767 | .send_dma_cmd = zorro_esp_send_blz1230II_dma_cmd, |
| 768 | .dma_error = zorro_esp_dma_error, |
| 769 | }; |
| 770 | |
| 771 | static const struct esp_driver_ops blz2060_esp_ops = { |
| 772 | .esp_write8 = zorro_esp_write8, |
| 773 | .esp_read8 = zorro_esp_read8, |
| 774 | .map_single = zorro_esp_map_single, |
| 775 | .map_sg = zorro_esp_map_sg, |
| 776 | .unmap_single = zorro_esp_unmap_single, |
| 777 | .unmap_sg = zorro_esp_unmap_sg, |
| 778 | .irq_pending = zorro_esp_irq_pending, |
| 779 | .dma_length_limit = zorro_esp_dma_length_limit, |
| 780 | .reset_dma = zorro_esp_reset_dma, |
| 781 | .dma_drain = zorro_esp_dma_drain, |
| 782 | .dma_invalidate = zorro_esp_dma_invalidate, |
| 783 | .send_dma_cmd = zorro_esp_send_blz2060_dma_cmd, |
| 784 | .dma_error = zorro_esp_dma_error, |
| 785 | }; |
| 786 | |
| 787 | static const struct esp_driver_ops cyber_esp_ops = { |
| 788 | .esp_write8 = zorro_esp_write8, |
| 789 | .esp_read8 = zorro_esp_read8, |
| 790 | .map_single = zorro_esp_map_single, |
| 791 | .map_sg = zorro_esp_map_sg, |
| 792 | .unmap_single = zorro_esp_unmap_single, |
| 793 | .unmap_sg = zorro_esp_unmap_sg, |
| 794 | .irq_pending = cyber_esp_irq_pending, |
| 795 | .dma_length_limit = zorro_esp_dma_length_limit, |
| 796 | .reset_dma = zorro_esp_reset_dma, |
| 797 | .dma_drain = zorro_esp_dma_drain, |
| 798 | .dma_invalidate = zorro_esp_dma_invalidate, |
| 799 | .send_dma_cmd = zorro_esp_send_cyber_dma_cmd, |
| 800 | .dma_error = zorro_esp_dma_error, |
| 801 | }; |
| 802 | |
| 803 | static const struct esp_driver_ops cyberII_esp_ops = { |
| 804 | .esp_write8 = zorro_esp_write8, |
| 805 | .esp_read8 = zorro_esp_read8, |
| 806 | .map_single = zorro_esp_map_single, |
| 807 | .map_sg = zorro_esp_map_sg, |
| 808 | .unmap_single = zorro_esp_unmap_single, |
| 809 | .unmap_sg = zorro_esp_unmap_sg, |
| 810 | .irq_pending = zorro_esp_irq_pending, |
| 811 | .dma_length_limit = zorro_esp_dma_length_limit, |
| 812 | .reset_dma = zorro_esp_reset_dma, |
| 813 | .dma_drain = zorro_esp_dma_drain, |
| 814 | .dma_invalidate = zorro_esp_dma_invalidate, |
| 815 | .send_dma_cmd = zorro_esp_send_cyberII_dma_cmd, |
| 816 | .dma_error = zorro_esp_dma_error, |
| 817 | }; |
| 818 | |
| 819 | static const struct esp_driver_ops fastlane_esp_ops = { |
| 820 | .esp_write8 = zorro_esp_write8, |
| 821 | .esp_read8 = zorro_esp_read8, |
| 822 | .map_single = zorro_esp_map_single, |
| 823 | .map_sg = zorro_esp_map_sg, |
| 824 | .unmap_single = zorro_esp_unmap_single, |
| 825 | .unmap_sg = zorro_esp_unmap_sg, |
| 826 | .irq_pending = fastlane_esp_irq_pending, |
| 827 | .dma_length_limit = zorro_esp_dma_length_limit, |
| 828 | .reset_dma = zorro_esp_reset_dma, |
| 829 | .dma_drain = zorro_esp_dma_drain, |
| 830 | .dma_invalidate = fastlane_esp_dma_invalidate, |
| 831 | .send_dma_cmd = zorro_esp_send_fastlane_dma_cmd, |
| 832 | .dma_error = zorro_esp_dma_error, |
| 833 | }; |
| 834 | |
| 835 | /* Zorro driver config data */ |
| 836 | |
| 837 | struct zorro_driver_data { |
| 838 | const char *name; |
| 839 | unsigned long offset; |
| 840 | unsigned long dma_offset; |
| 841 | int absolute; /* offset is absolute address */ |
| 842 | int scsi_option; |
| 843 | const struct esp_driver_ops *esp_ops; |
| 844 | }; |
| 845 | |
| 846 | /* board types */ |
| 847 | |
| 848 | enum { |
| 849 | ZORRO_BLZ1230, |
| 850 | ZORRO_BLZ1230II, |
| 851 | ZORRO_BLZ2060, |
| 852 | ZORRO_CYBER, |
| 853 | ZORRO_CYBERII, |
| 854 | ZORRO_FASTLANE, |
| 855 | }; |
| 856 | |
| 857 | /* per-board config data */ |
| 858 | |
| 859 | static const struct zorro_driver_data zorro_esp_boards[] = { |
| 860 | [ZORRO_BLZ1230] = { |
| 861 | .name = "Blizzard 1230", |
| 862 | .offset = 0x8000, |
| 863 | .dma_offset = 0x10000, |
| 864 | .scsi_option = 1, |
| 865 | .esp_ops = &blz1230_esp_ops, |
| 866 | }, |
| 867 | [ZORRO_BLZ1230II] = { |
| 868 | .name = "Blizzard 1230II", |
| 869 | .offset = 0x10000, |
| 870 | .dma_offset = 0x10021, |
| 871 | .scsi_option = 1, |
| 872 | .esp_ops = &blz1230II_esp_ops, |
| 873 | }, |
| 874 | [ZORRO_BLZ2060] = { |
| 875 | .name = "Blizzard 2060", |
| 876 | .offset = 0x1ff00, |
| 877 | .dma_offset = 0x1ffe0, |
| 878 | .esp_ops = &blz2060_esp_ops, |
| 879 | }, |
| 880 | [ZORRO_CYBER] = { |
| 881 | .name = "CyberStormI", |
| 882 | .offset = 0xf400, |
| 883 | .dma_offset = 0xf800, |
| 884 | .esp_ops = &cyber_esp_ops, |
| 885 | }, |
| 886 | [ZORRO_CYBERII] = { |
| 887 | .name = "CyberStormII", |
| 888 | .offset = 0x1ff03, |
| 889 | .dma_offset = 0x1ff43, |
| 890 | .scsi_option = 1, |
| 891 | .esp_ops = &cyberII_esp_ops, |
| 892 | }, |
| 893 | [ZORRO_FASTLANE] = { |
| 894 | .name = "Fastlane", |
| 895 | .offset = 0x1000001, |
| 896 | .dma_offset = 0x1000041, |
| 897 | .esp_ops = &fastlane_esp_ops, |
| 898 | }, |
| 899 | }; |
| 900 | |
| 901 | static const struct zorro_device_id zorro_esp_zorro_tbl[] = { |
| 902 | { /* Blizzard 1230 IV */ |
| 903 | .id = ZORRO_ID(PHASE5, 0x11, 0), |
| 904 | .driver_data = ZORRO_BLZ1230, |
| 905 | }, |
| 906 | { /* Blizzard 1230 II (Zorro II) or Fastlane (Zorro III) */ |
| 907 | .id = ZORRO_ID(PHASE5, 0x0B, 0), |
| 908 | .driver_data = ZORRO_BLZ1230II, |
| 909 | }, |
| 910 | { /* Blizzard 2060 */ |
| 911 | .id = ZORRO_ID(PHASE5, 0x18, 0), |
| 912 | .driver_data = ZORRO_BLZ2060, |
| 913 | }, |
| 914 | { /* Cyberstorm */ |
| 915 | .id = ZORRO_ID(PHASE5, 0x0C, 0), |
| 916 | .driver_data = ZORRO_CYBER, |
| 917 | }, |
| 918 | { /* Cyberstorm II */ |
| 919 | .id = ZORRO_ID(PHASE5, 0x19, 0), |
| 920 | .driver_data = ZORRO_CYBERII, |
| 921 | }, |
| 922 | { 0 } |
| 923 | }; |
| 924 | MODULE_DEVICE_TABLE(zorro, zorro_esp_zorro_tbl); |
| 925 | |
| 926 | static int zorro_esp_probe(struct zorro_dev *z, |
| 927 | const struct zorro_device_id *ent) |
| 928 | { |
| 929 | struct scsi_host_template *tpnt = &scsi_esp_template; |
| 930 | struct Scsi_Host *host; |
| 931 | struct esp *esp; |
| 932 | const struct zorro_driver_data *zdd; |
| 933 | struct zorro_esp_priv *zep; |
| 934 | unsigned long board, ioaddr, dmaaddr; |
| 935 | int err; |
| 936 | |
| 937 | board = zorro_resource_start(z); |
| 938 | zdd = &zorro_esp_boards[ent->driver_data]; |
| 939 | |
| 940 | pr_info("%s found at address 0x%lx.\n", zdd->name, board); |
| 941 | |
| 942 | zep = kzalloc(sizeof(*zep), GFP_KERNEL); |
| 943 | if (!zep) { |
| 944 | pr_err("Can't allocate device private data!\n"); |
| 945 | return -ENOMEM; |
| 946 | } |
| 947 | |
| 948 | /* let's figure out whether we have a Zorro II or Zorro III board */ |
| 949 | if ((z->rom.er_Type & ERT_TYPEMASK) == ERT_ZORROIII) { |
| 950 | if (board > 0xffffff) |
| 951 | zep->zorro3 = 1; |
| 952 | } else { |
| 953 | /* |
| 954 | * Even though most of these boards identify as Zorro II, |
| 955 | * they are in fact CPU expansion slot boards and have full |
| 956 | * access to all of memory. Fix up DMA bitmask here. |
| 957 | */ |
| 958 | z->dev.coherent_dma_mask = DMA_BIT_MASK(32); |
| 959 | } |
| 960 | |
| 961 | /* |
| 962 | * If Zorro III and ID matches Fastlane, our device table entry |
| 963 | * contains data for the Blizzard 1230 II board which does share the |
| 964 | * same ID. Fix up device table entry here. |
| 965 | * TODO: Some Cyberstom060 boards also share this ID but would need |
| 966 | * to use the Cyberstorm I driver data ... we catch this by checking |
| 967 | * for presence of ESP chip later, but don't try to fix up yet. |
| 968 | */ |
| 969 | if (zep->zorro3 && ent->driver_data == ZORRO_BLZ1230II) { |
| 970 | pr_info("%s at address 0x%lx is Fastlane Z3, fixing data!\n", |
| 971 | zdd->name, board); |
| 972 | zdd = &zorro_esp_boards[ZORRO_FASTLANE]; |
| 973 | } |
| 974 | |
| 975 | if (zdd->absolute) { |
| 976 | ioaddr = zdd->offset; |
| 977 | dmaaddr = zdd->dma_offset; |
| 978 | } else { |
| 979 | ioaddr = board + zdd->offset; |
| 980 | dmaaddr = board + zdd->dma_offset; |
| 981 | } |
| 982 | |
| 983 | if (!zorro_request_device(z, zdd->name)) { |
| 984 | pr_err("cannot reserve region 0x%lx, abort\n", |
| 985 | board); |
| 986 | err = -EBUSY; |
| 987 | goto fail_free_zep; |
| 988 | } |
| 989 | |
| 990 | host = scsi_host_alloc(tpnt, sizeof(struct esp)); |
| 991 | |
| 992 | if (!host) { |
| 993 | pr_err("No host detected; board configuration problem?\n"); |
| 994 | err = -ENOMEM; |
| 995 | goto fail_release_device; |
| 996 | } |
| 997 | |
| 998 | host->base = ioaddr; |
| 999 | host->this_id = 7; |
| 1000 | |
| 1001 | esp = shost_priv(host); |
| 1002 | esp->host = host; |
| 1003 | esp->dev = &z->dev; |
| 1004 | |
| 1005 | esp->scsi_id = host->this_id; |
| 1006 | esp->scsi_id_mask = (1 << esp->scsi_id); |
| 1007 | |
| 1008 | esp->cfreq = 40000000; |
| 1009 | |
| 1010 | zep->esp = esp; |
| 1011 | |
| 1012 | dev_set_drvdata(esp->dev, zep); |
| 1013 | |
| 1014 | /* additional setup required for Fastlane */ |
| 1015 | if (zep->zorro3 && ent->driver_data == ZORRO_BLZ1230II) { |
| 1016 | /* map full address space up to ESP base for DMA */ |
| 1017 | zep->board_base = ioremap_nocache(board, |
| 1018 | FASTLANE_ESP_ADDR-1); |
| 1019 | if (!zep->board_base) { |
| 1020 | pr_err("Cannot allocate board address space\n"); |
| 1021 | err = -ENOMEM; |
| 1022 | goto fail_free_host; |
| 1023 | } |
| 1024 | /* initialize DMA control shadow register */ |
| 1025 | zep->ctrl_data = (FASTLANE_DMA_FCODE | |
| 1026 | FASTLANE_DMA_EDI | FASTLANE_DMA_ESI); |
| 1027 | } |
| 1028 | |
| 1029 | esp->ops = zdd->esp_ops; |
| 1030 | |
| 1031 | if (ioaddr > 0xffffff) |
| 1032 | esp->regs = ioremap_nocache(ioaddr, 0x20); |
| 1033 | else |
| 1034 | /* ZorroII address space remapped nocache by early startup */ |
| 1035 | esp->regs = ZTWO_VADDR(ioaddr); |
| 1036 | |
| 1037 | if (!esp->regs) { |
| 1038 | err = -ENOMEM; |
| 1039 | goto fail_unmap_fastlane; |
| 1040 | } |
| 1041 | |
| 1042 | /* Check whether a Blizzard 12x0 or CyberstormII really has SCSI */ |
| 1043 | if (zdd->scsi_option) { |
| 1044 | zorro_esp_write8(esp, (ESP_CONFIG1_PENABLE | 7), ESP_CFG1); |
| 1045 | if (zorro_esp_read8(esp, ESP_CFG1) != (ESP_CONFIG1_PENABLE|7)) { |
| 1046 | err = -ENODEV; |
| 1047 | goto fail_unmap_regs; |
| 1048 | } |
| 1049 | } |
| 1050 | |
| 1051 | if (zep->zorro3) { |
| 1052 | /* |
| 1053 | * Only Fastlane Z3 for now - add switch for correct struct |
| 1054 | * dma_registers size if adding any more |
| 1055 | */ |
| 1056 | esp->dma_regs = ioremap_nocache(dmaaddr, |
| 1057 | sizeof(struct fastlane_dma_registers)); |
| 1058 | } else |
| 1059 | /* ZorroII address space remapped nocache by early startup */ |
| 1060 | esp->dma_regs = ZTWO_VADDR(dmaaddr); |
| 1061 | |
| 1062 | if (!esp->dma_regs) { |
| 1063 | err = -ENOMEM; |
| 1064 | goto fail_unmap_regs; |
| 1065 | } |
| 1066 | |
| 1067 | esp->command_block = dma_alloc_coherent(esp->dev, 16, |
| 1068 | &esp->command_block_dma, |
| 1069 | GFP_KERNEL); |
| 1070 | |
| 1071 | if (!esp->command_block) { |
| 1072 | err = -ENOMEM; |
| 1073 | goto fail_unmap_dma_regs; |
| 1074 | } |
| 1075 | |
| 1076 | host->irq = IRQ_AMIGA_PORTS; |
| 1077 | err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, |
| 1078 | "Amiga Zorro ESP", esp); |
| 1079 | if (err < 0) { |
| 1080 | err = -ENODEV; |
| 1081 | goto fail_free_command_block; |
| 1082 | } |
| 1083 | |
| 1084 | /* register the chip */ |
| 1085 | err = scsi_esp_register(esp, &z->dev); |
| 1086 | |
| 1087 | if (err) { |
| 1088 | err = -ENOMEM; |
| 1089 | goto fail_free_irq; |
| 1090 | } |
| 1091 | |
| 1092 | return 0; |
| 1093 | |
| 1094 | fail_free_irq: |
| 1095 | free_irq(host->irq, esp); |
| 1096 | |
| 1097 | fail_free_command_block: |
| 1098 | dma_free_coherent(esp->dev, 16, |
| 1099 | esp->command_block, |
| 1100 | esp->command_block_dma); |
| 1101 | |
| 1102 | fail_unmap_dma_regs: |
| 1103 | if (zep->zorro3) |
| 1104 | iounmap(esp->dma_regs); |
| 1105 | |
| 1106 | fail_unmap_regs: |
| 1107 | if (ioaddr > 0xffffff) |
| 1108 | iounmap(esp->regs); |
| 1109 | |
| 1110 | fail_unmap_fastlane: |
| 1111 | if (zep->zorro3) |
| 1112 | iounmap(zep->board_base); |
| 1113 | |
| 1114 | fail_free_host: |
| 1115 | scsi_host_put(host); |
| 1116 | |
| 1117 | fail_release_device: |
| 1118 | zorro_release_device(z); |
| 1119 | |
| 1120 | fail_free_zep: |
| 1121 | kfree(zep); |
| 1122 | |
| 1123 | return err; |
| 1124 | } |
| 1125 | |
| 1126 | static void zorro_esp_remove(struct zorro_dev *z) |
| 1127 | { |
| 1128 | struct zorro_esp_priv *zep = dev_get_drvdata(&z->dev); |
| 1129 | struct esp *esp = zep->esp; |
| 1130 | struct Scsi_Host *host = esp->host; |
| 1131 | |
| 1132 | scsi_esp_unregister(esp); |
| 1133 | |
| 1134 | free_irq(host->irq, esp); |
| 1135 | dma_free_coherent(esp->dev, 16, |
| 1136 | esp->command_block, |
| 1137 | esp->command_block_dma); |
| 1138 | |
| 1139 | if (zep->zorro3) { |
| 1140 | iounmap(zep->board_base); |
| 1141 | iounmap(esp->dma_regs); |
| 1142 | } |
| 1143 | |
| 1144 | if (host->base > 0xffffff) |
| 1145 | iounmap(esp->regs); |
| 1146 | |
| 1147 | scsi_host_put(host); |
| 1148 | |
| 1149 | zorro_release_device(z); |
| 1150 | |
| 1151 | kfree(zep); |
| 1152 | } |
| 1153 | |
| 1154 | static struct zorro_driver zorro_esp_driver = { |
| 1155 | .name = KBUILD_MODNAME, |
| 1156 | .id_table = zorro_esp_zorro_tbl, |
| 1157 | .probe = zorro_esp_probe, |
| 1158 | .remove = zorro_esp_remove, |
| 1159 | }; |
| 1160 | |
| 1161 | static int __init zorro_esp_scsi_init(void) |
| 1162 | { |
| 1163 | return zorro_register_driver(&zorro_esp_driver); |
| 1164 | } |
| 1165 | |
| 1166 | static void __exit zorro_esp_scsi_exit(void) |
| 1167 | { |
| 1168 | zorro_unregister_driver(&zorro_esp_driver); |
| 1169 | } |
| 1170 | |
| 1171 | module_init(zorro_esp_scsi_init); |
| 1172 | module_exit(zorro_esp_scsi_exit); |