omap: use common initialization for PMIC i2c bus
Introduce omap_pmic_init that registers i2c bus and PMIC device on that
bus and add omap2/3/4 wrappers for common cases.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index f3a7b10..7eaad62 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -46,6 +46,7 @@
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
+#include "common-board-devices.h"
#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET 62
@@ -408,15 +409,6 @@
.usb = &omap4_usbphy_data,
};
-static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl6030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = OMAP44XX_IRQ_SYS_1N,
- .platform_data = &omap4_panda_twldata,
- },
-};
-
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
* is connected as I2C slave device, and can be accessed at address 0x50
@@ -429,12 +421,7 @@
static int __init omap4_panda_i2c_init(void)
{
- /*
- * Phoenix Audio IC needs I2C1 to
- * start with 400 KHz or less
- */
- omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
- ARRAY_SIZE(omap4_panda_i2c_boardinfo));
+ omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP