[POWERPC] pasemi: Configure DMA controller interrupts
The DMA controller on PWRficient is somewhat special -- has a PCI header
so it looks like it's on the root PCI (-Express) root bus, but it uses
more than the default number of interrupts (and they are hardwired).
We need to wire up all interrupts for the DMA controller. The generic
IRQ code will only map the primary interrupt from the PCI header (128),
so add 129->211 by hand.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index faa618e..7ecb2ba 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -163,6 +163,19 @@
}
+void __devinit pas_pci_irq_fixup(struct pci_dev *dev)
+{
+ /* DMA is special, 84 interrupts (128 -> 211), all but 128
+ * need to be mapped by hand here.
+ */
+ if (dev->vendor == 0x1959 && dev->device == 0xa007) {
+ int i;
+ for (i = 129; i < 212; i++)
+ irq_create_mapping(NULL, i);
+ }
+}
+
+
void __init pas_pci_init(void)
{
struct device_node *np, *root;