b43: N-PHY: add needed struct definitions

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 6b995b9..cb784a2 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -29,6 +29,30 @@
 #include "phy_n.h"
 #include "tables_nphy.h"
 
+struct nphy_txgains {
+	u16 txgm[2];
+	u16 pga[2];
+	u16 pad[2];
+	u16 ipa[2];
+};
+
+struct nphy_iqcal_params {
+	u16 txgm;
+	u16 pga;
+	u16 pad;
+	u16 ipa;
+	u16 cal_gain;
+	u16 ncorr[5];
+};
+
+struct nphy_iq_est {
+	s32 iq0_prod;
+	u32 i0_pwr;
+	u32 q0_pwr;
+	s32 iq1_prod;
+	u32 i1_pwr;
+	u32 q1_pwr;
+};
 
 void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
 {//TODO
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 1749aef..f829e4e39 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -919,6 +919,44 @@
 
 struct b43_wldev;
 
+struct b43_phy_n_iq_comp {
+	s16 a0;
+	s16 b0;
+	s16 a1;
+	s16 b1;
+};
+
+struct b43_phy_n_rssical_cache {
+	u16 rssical_radio_regs_2G[2];
+	u16 rssical_phy_regs_2G[12];
+
+	u16 rssical_radio_regs_5G[2];
+	u16 rssical_phy_regs_5G[12];
+};
+
+struct b43_phy_n_cal_cache {
+	u16 txcal_radio_regs_2G[8];
+	u16 txcal_coeffs_2G[8];
+	struct b43_phy_n_iq_comp rxcal_coeffs_2G;
+
+	u16 txcal_radio_regs_5G[8];
+	u16 txcal_coeffs_5G[8];
+	struct b43_phy_n_iq_comp rxcal_coeffs_5G;
+};
+
+struct b43_phy_n_txpwrindex {
+	s8 index;
+	s8 index_internal;
+	s8 index_internal_save;
+	u16 AfectrlOverride;
+	u16 AfeCtrlDacGain;
+	u16 rad_gain;
+	u8 bbmult;
+	u16 iqcomp_a;
+	u16 iqcomp_b;
+	u16 locomp;
+};
+
 struct b43_phy_n {
 	//TODO lots of missing stuff
 };
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 1f0a602..f6753c4 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -46,6 +46,11 @@
 
 struct b43_wldev;
 
+struct nphy_txiqcal_ladder {
+	u8 percent;
+	u8 g_env;
+};
+
 /* Upload the default register value table.
  * If "ghz5" is true, we upload the 5Ghz table. Otherwise the 2.4Ghz
  * table is uploaded. If "ignore_uploadflag" is true, we upload any value