PCI: Fix whitespace, capitalization, and spelling errors
Fix whitespace, capitalization, and spelling errors. No functional change.
I know "busses" is not an error, but "buses" was more common, so I used it
consistently.
Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus())
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 9df78bc..bd04415 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -123,7 +123,7 @@
static void __init print_bus_info (void)
{
struct bus_info *ptr;
-
+
list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
debug ("%s - slot_min = %x\n", __func__, ptr->slot_min);
debug ("%s - slot_max = %x\n", __func__, ptr->slot_max);
@@ -131,7 +131,7 @@
debug ("%s - bus# = %x\n", __func__, ptr->busno);
debug ("%s - current_speed = %x\n", __func__, ptr->current_speed);
debug ("%s - controller_id = %x\n", __func__, ptr->controller_id);
-
+
debug ("%s - slots_at_33_conv = %x\n", __func__, ptr->slots_at_33_conv);
debug ("%s - slots_at_66_conv = %x\n", __func__, ptr->slots_at_66_conv);
debug ("%s - slots_at_66_pcix = %x\n", __func__, ptr->slots_at_66_pcix);
@@ -144,7 +144,7 @@
static void print_lo_info (void)
{
struct rio_detail *ptr;
- debug ("print_lo_info ----\n");
+ debug ("print_lo_info ----\n");
list_for_each_entry(ptr, &rio_lo_head, rio_detail_list) {
debug ("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
debug ("%s - rio_type = %x\n", __func__, ptr->rio_type);
@@ -176,7 +176,7 @@
struct ebda_pci_rsrc *ptr;
list_for_each_entry(ptr, &ibmphp_ebda_pci_rsrc_head, ebda_pci_rsrc_list) {
- debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
+ debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
__func__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr);
}
}
@@ -259,7 +259,7 @@
ebda_seg = readw (io_mem);
iounmap (io_mem);
debug ("returned ebda segment: %x\n", ebda_seg);
-
+
io_mem = ioremap(ebda_seg<<4, 1);
if (!io_mem)
return -ENOMEM;
@@ -310,7 +310,7 @@
re = readw (io_mem + sub_addr); /* next sub blk */
sub_addr += 2;
- rc_id = readw (io_mem + sub_addr); /* sub blk id */
+ rc_id = readw (io_mem + sub_addr); /* sub blk id */
sub_addr += 2;
if (rc_id != 0x5243)
@@ -330,7 +330,7 @@
debug ("info about hpc descriptor---\n");
debug ("hot blk format: %x\n", format);
debug ("num of controller: %x\n", num_ctlrs);
- debug ("offset of hpc data structure enteries: %x\n ", sub_addr);
+ debug ("offset of hpc data structure entries: %x\n ", sub_addr);
sub_addr = base + re; /* re sub blk */
/* FIXME: rc is never used/checked */
@@ -359,7 +359,7 @@
debug ("info about rsrc descriptor---\n");
debug ("format: %x\n", format);
debug ("num of rsrc: %x\n", num_entries);
- debug ("offset of rsrc data structure enteries: %x\n ", sub_addr);
+ debug ("offset of rsrc data structure entries: %x\n ", sub_addr);
hs_complete = 1;
} else {
@@ -376,7 +376,7 @@
rio_table_ptr->scal_count = readb (io_mem + offset + 1);
rio_table_ptr->riodev_count = readb (io_mem + offset + 2);
rio_table_ptr->offset = offset +3 ;
-
+
debug("info about rio table hdr ---\n");
debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ",
rio_table_ptr->ver_num, rio_table_ptr->scal_count,
@@ -440,12 +440,12 @@
rio_detail_ptr->chassis_num = readb (io_mem + offset + 14);
// debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
//create linked list of chassis
- if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
+ if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head);
- //create linked list of expansion box
- else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
+ //create linked list of expansion box
+ else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head);
- else
+ else
// not in my concern
kfree (rio_detail_ptr);
offset += 15;
@@ -456,7 +456,7 @@
}
/*
- * reorganizing linked list of chassis
+ * reorganizing linked list of chassis
*/
static struct opt_rio *search_opt_vg (u8 chassis_num)
{
@@ -464,7 +464,7 @@
list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
if (ptr->chassis_num == chassis_num)
return ptr;
- }
+ }
return NULL;
}
@@ -472,7 +472,7 @@
{
struct opt_rio *opt_rio_ptr = NULL;
struct rio_detail *rio_detail_ptr = NULL;
-
+
list_for_each_entry(rio_detail_ptr, &rio_vg_head, rio_detail_list) {
opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num);
if (!opt_rio_ptr) {
@@ -484,14 +484,14 @@
opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num;
list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head);
- } else {
+ } else {
opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num);
- }
+ }
}
print_opt_vg ();
- return 0;
-}
+ return 0;
+}
/*
* reorganizing linked list of expansion box
@@ -502,7 +502,7 @@
list_for_each_entry(ptr, &opt_lo_head, opt_rio_lo_list) {
if (ptr->chassis_num == chassis_num)
return ptr;
- }
+ }
return NULL;
}
@@ -510,7 +510,7 @@
{
struct opt_rio_lo *opt_rio_lo_ptr = NULL;
struct rio_detail *rio_detail_ptr = NULL;
-
+
list_for_each_entry(rio_detail_ptr, &rio_lo_head, rio_detail_list) {
opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num);
if (!opt_rio_lo_ptr) {
@@ -522,22 +522,22 @@
opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num;
opt_rio_lo_ptr->pack_count = 1;
-
+
list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head);
- } else {
+ } else {
opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num);
opt_rio_lo_ptr->pack_count = 2;
- }
+ }
}
- return 0;
+ return 0;
}
-
+
/* Since we don't know the max slot number per each chassis, hence go
* through the list of all chassis to find out the range
- * Arguments: slot_num, 1st slot number of the chassis we think we are on,
- * var (0 = chassis, 1 = expansion box)
+ * Arguments: slot_num, 1st slot number of the chassis we think we are on,
+ * var (0 = chassis, 1 = expansion box)
*/
static int first_slot_num (u8 slot_num, u8 first_slot, u8 var)
{
@@ -547,7 +547,7 @@
if (!var) {
list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
- if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
+ if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
rc = -ENODEV;
break;
}
@@ -569,7 +569,7 @@
list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
//check to see if this slot_num belongs to expansion box
- if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
+ if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
return opt_lo_ptr;
}
return NULL;
@@ -580,8 +580,8 @@
struct opt_rio *opt_vg_ptr;
list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
- //check to see if this slot_num belongs to chassis
- if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
+ //check to see if this slot_num belongs to chassis
+ if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
return opt_vg_ptr;
}
return NULL;
@@ -594,13 +594,13 @@
{
u8 first_slot = 1;
struct slot * slot_cur;
-
+
list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
if (slot_cur->ctrl) {
- if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
+ if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
first_slot = slot_cur->ctrl->ending_slot_num;
}
- }
+ }
return first_slot + 1;
}
@@ -622,11 +622,11 @@
err ("Structure passed is empty\n");
return NULL;
}
-
+
slot_num = slot_cur->number;
memset (str, 0, sizeof(str));
-
+
if (rio_table_ptr) {
if (rio_table_ptr->ver_num == 3) {
opt_vg_ptr = find_chassis_num (slot_num);
@@ -660,7 +660,7 @@
/* if both NULL and we DO have correct RIO table in BIOS */
return NULL;
}
- }
+ }
if (!flag) {
if (slot_cur->ctrl->ctlr_type == 4) {
first_slot = calculate_first_slot (slot_num);
@@ -798,7 +798,7 @@
slot_ptr->ctl_index = readb (io_mem + addr_slot + 2*slot_num);
slot_ptr->slot_cap = readb (io_mem + addr_slot + 3*slot_num);
- // create bus_info lined list --- if only one slot per bus: slot_min = slot_max
+ // create bus_info lined list --- if only one slot per bus: slot_min = slot_max
bus_info_ptr2 = ibmphp_find_same_bus_num (slot_ptr->slot_bus_num);
if (!bus_info_ptr2) {
@@ -814,9 +814,9 @@
bus_info_ptr1->index = bus_index++;
bus_info_ptr1->current_speed = 0xff;
bus_info_ptr1->current_bus_mode = 0xff;
-
+
bus_info_ptr1->controller_id = hpc_ptr->ctlr_id;
-
+
list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head);
} else {
@@ -851,7 +851,7 @@
bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv;
bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix;
bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix;
- bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
+ bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
}
bus_ptr++;
}
@@ -864,7 +864,7 @@
hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1);
hpc_ptr->irq = readb (io_mem + addr + 2);
addr += 3;
- debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
+ debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
hpc_ptr->u.pci_ctlr.bus,
hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
break;
@@ -932,7 +932,7 @@
tmp_slot->supported_speed = 2;
else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
tmp_slot->supported_speed = 1;
-
+
if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
tmp_slot->supported_bus_mode = 1;
else
@@ -1000,7 +1000,7 @@
return rc;
}
-/*
+/*
* map info (bus, devfun, start addr, end addr..) of i/o, memory,
* pfm from the physical addr to a list of resource.
*/
@@ -1057,7 +1057,7 @@
addr += 10;
debug ("rsrc from mem or pfm ---\n");
- debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
+ debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
@@ -1096,7 +1096,7 @@
struct bus_info *ptr;
list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
- if (ptr->busno == num)
+ if (ptr->busno == num)
return ptr;
}
return NULL;
@@ -1110,7 +1110,7 @@
struct bus_info *ptr;
list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
- if (ptr->busno == num)
+ if (ptr->busno == num)
return ptr->index;
}
return -ENODEV;
@@ -1168,7 +1168,7 @@
.subdevice = HPC_SUBSYSTEM_ID,
.class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
}, {}
-};
+};
MODULE_DEVICE_TABLE(pci, id_table);
@@ -1197,7 +1197,7 @@
struct controller *ctrl;
debug ("inside ibmphp_probe\n");
-
+
list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
if (ctrl->ctlr_type == 1) {
if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) {
@@ -1210,4 +1210,3 @@
}
return -ENODEV;
}
-