diff --git a/drivers/acpi/acpica/utaddress.c b/drivers/acpi/acpica/utaddress.c
new file mode 100644
index 0000000..67932ae
--- /dev/null
+++ b/drivers/acpi/acpica/utaddress.c
@@ -0,0 +1,294 @@
+/******************************************************************************
+ *
+ * Module Name: utaddress - op_region address range check
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utaddress")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_add_address_range
+ *
+ * PARAMETERS:  space_id            - Address space ID
+ *              Address             - op_region start address
+ *              Length              - op_region length
+ *              region_node         - op_region namespace node
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Add the Operation Region address range to the global list.
+ *              The only supported Space IDs are Memory and I/O. Called when
+ *              the op_region address/length operands are fully evaluated.
+ *
+ * MUTEX:       Locks the namespace
+ *
+ * NOTE: Because this interface is only called when an op_region argument
+ * list is evaluated, there cannot be any duplicate region_nodes.
+ * Duplicate Address/Length values are allowed, however, so that multiple
+ * address conflicts can be detected.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ut_add_address_range(acpi_adr_space_type space_id,
+			  acpi_physical_address address,
+			  u32 length, struct acpi_namespace_node *region_node)
+{
+	struct acpi_address_range *range_info;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ut_add_address_range);
+
+	if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
+	    (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Allocate/init a new info block, add it to the appropriate list */
+
+	range_info = ACPI_ALLOCATE(sizeof(struct acpi_address_range));
+	if (!range_info) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	range_info->start_address = address;
+	range_info->end_address = (address + length - 1);
+	range_info->region_node = region_node;
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		ACPI_FREE(range_info);
+		return_ACPI_STATUS(status);
+	}
+
+	range_info->next = acpi_gbl_address_range_list[space_id];
+	acpi_gbl_address_range_list[space_id] = range_info;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
+			  "\nAdded [%4.4s] address range: 0x%p-0x%p\n",
+			  acpi_ut_get_node_name(range_info->region_node),
+			  ACPI_CAST_PTR(void, address),
+			  ACPI_CAST_PTR(void, range_info->end_address)));
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_remove_address_range
+ *
+ * PARAMETERS:  space_id            - Address space ID
+ *              region_node         - op_region namespace node
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Remove the Operation Region from the global list. The only
+ *              supported Space IDs are Memory and I/O. Called when an
+ *              op_region is deleted.
+ *
+ * MUTEX:       Assumes the namespace is locked
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_remove_address_range(acpi_adr_space_type space_id,
+			     struct acpi_namespace_node *region_node)
+{
+	struct acpi_address_range *range_info;
+	struct acpi_address_range *prev;
+
+	ACPI_FUNCTION_TRACE(ut_remove_address_range);
+
+	if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
+	    (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+		return_VOID;
+	}
+
+	/* Get the appropriate list head and check the list */
+
+	range_info = prev = acpi_gbl_address_range_list[space_id];
+	while (range_info) {
+		if (range_info->region_node == region_node) {
+			if (range_info == prev) {	/* Found at list head */
+				acpi_gbl_address_range_list[space_id] =
+				    range_info->next;
+			} else {
+				prev->next = range_info->next;
+			}
+
+			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
+					  "\nRemoved [%4.4s] address range: 0x%p-0x%p\n",
+					  acpi_ut_get_node_name(range_info->
+								region_node),
+					  ACPI_CAST_PTR(void,
+							range_info->
+							start_address),
+					  ACPI_CAST_PTR(void,
+							range_info->
+							end_address)));
+
+			ACPI_FREE(range_info);
+			return_VOID;
+		}
+
+		prev = range_info;
+		range_info = range_info->next;
+	}
+
+	return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_check_address_range
+ *
+ * PARAMETERS:  space_id            - Address space ID
+ *              Address             - Start address
+ *              Length              - Length of address range
+ *              Warn                - TRUE if warning on overlap desired
+ *
+ * RETURN:      Count of the number of conflicts detected. Zero is always
+ *              returned for Space IDs other than Memory or I/O.
+ *
+ * DESCRIPTION: Check if the input address range overlaps any of the
+ *              ASL operation region address ranges. The only supported
+ *              Space IDs are Memory and I/O.
+ *
+ * MUTEX:       Assumes the namespace is locked.
+ *
+ ******************************************************************************/
+
+u32
+acpi_ut_check_address_range(acpi_adr_space_type space_id,
+			    acpi_physical_address address, u32 length, u8 warn)
+{
+	struct acpi_address_range *range_info;
+	acpi_physical_address end_address;
+	char *pathname;
+	u32 overlap_count = 0;
+
+	ACPI_FUNCTION_TRACE(ut_check_address_range);
+
+	if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
+	    (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+		return_UINT32(0);
+	}
+
+	range_info = acpi_gbl_address_range_list[space_id];
+	end_address = address + length - 1;
+
+	/* Check entire list for all possible conflicts */
+
+	while (range_info) {
+		/*
+		 * Check if the requested Address/Length overlaps this address_range.
+		 * Four cases to consider:
+		 *
+		 * 1) Input address/length is contained completely in the address range
+		 * 2) Input address/length overlaps range at the range start
+		 * 3) Input address/length overlaps range at the range end
+		 * 4) Input address/length completely encompasses the range
+		 */
+		if ((address <= range_info->end_address) &&
+		    (end_address >= range_info->start_address)) {
+
+			/* Found an address range overlap */
+
+			overlap_count++;
+			if (warn) {	/* Optional warning message */
+				pathname =
+				    acpi_ns_get_external_pathname(range_info->
+								  region_node);
+
+				ACPI_WARNING((AE_INFO,
+					      "0x%p-0x%p %s conflicts with Region %s %d",
+					      ACPI_CAST_PTR(void, address),
+					      ACPI_CAST_PTR(void, end_address),
+					      acpi_ut_get_region_name(space_id),
+					      pathname, overlap_count));
+				ACPI_FREE(pathname);
+			}
+		}
+
+		range_info = range_info->next;
+	}
+
+	return_UINT32(overlap_count);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_delete_address_lists
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Delete all global address range lists (called during
+ *              subsystem shutdown).
+ *
+ ******************************************************************************/
+
+void acpi_ut_delete_address_lists(void)
+{
+	struct acpi_address_range *next;
+	struct acpi_address_range *range_info;
+	int i;
+
+	/* Delete all elements in all address range lists */
+
+	for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) {
+		next = acpi_gbl_address_range_list[i];
+
+		while (next) {
+			range_info = next;
+			next = range_info->next;
+			ACPI_FREE(range_info);
+		}
+
+		acpi_gbl_address_range_list[i] = NULL;
+	}
+}