pata_cmd64x: add cmd64x_fixup()
Factor out common code from cmd64x_[re]init_one() to cmd64x_fixup().
Remove stale comment and fix a minor CodingStyle issue while at it.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 7bafc16..b8f2a64 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -288,6 +288,22 @@
.cable_detect = cmd648_cable_detect,
};
+static void cmd64x_fixup(struct pci_dev *pdev)
+{
+ u8 mrdmode;
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+ pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+ mrdmode &= ~0x30; /* IRQ set up */
+ mrdmode |= 0x02; /* Memory read line enable */
+ pci_write_config_byte(pdev, MRDMODE, mrdmode);
+
+ /* PPC specific fixup copied from old driver */
+#ifdef CONFIG_PPC
+ pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+}
+
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info cmd_info[6] = {
@@ -336,7 +352,7 @@
&cmd_info[id->driver_data],
NULL
};
- u8 mrdmode, reg;
+ u8 reg;
int rc;
struct pci_dev *bridge = pdev->bus->self;
/* mobility split bridges don't report enabled ports correctly */
@@ -368,11 +384,7 @@
cntrl_ch0_ok = 0;
}
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
- pci_read_config_byte(pdev, MRDMODE, &mrdmode);
- mrdmode &= ~ 0x30; /* IRQ set up */
- mrdmode |= 0x02; /* Memory read line enable */
- pci_write_config_byte(pdev, MRDMODE, mrdmode);
+ cmd64x_fixup(pdev);
/* check for enabled ports */
pci_read_config_byte(pdev, CNTRL, ®);
@@ -388,13 +400,6 @@
ppi[1] = &ata_dummy_port_info;
}
- /* Force PIO 0 here.. */
-
- /* PPC specific fixup copied from old driver */
-#ifdef CONFIG_PPC
- pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
-
return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
}
@@ -402,21 +407,14 @@
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- u8 mrdmode;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
- pci_read_config_byte(pdev, MRDMODE, &mrdmode);
- mrdmode &= ~ 0x30; /* IRQ set up */
- mrdmode |= 0x02; /* Memory read line enable */
- pci_write_config_byte(pdev, MRDMODE, mrdmode);
-#ifdef CONFIG_PPC
- pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
+ cmd64x_fixup(pdev);
+
ata_host_resume(host);
return 0;
}